9e01842c6a
mavlink ulog: advertise ulog_stream topic before subscribing to ulog_stream_ack
...
This reduces the maximum number of needed file descriptors by 1 when using
ulog streaming.
2017-08-16 16:46:56 +02:00
ba150566c6
mavlink_command_sender: add some log printfs
...
This improves the printfs which will be logged. This should improve to
debug the camera triggering. The debug printfs are disabled by default.
2017-08-16 09:47:50 +02:00
31edab6d6d
mavlink_command_sender: remove unused include
2017-08-16 09:47:50 +02:00
33e67fd527
Disable PA during landing
2017-08-16 08:19:06 +02:00
e6c942033b
Disable pusher assist when descending
2017-08-16 08:19:06 +02:00
8f5293d7b0
Remove explicit pusher throttle setting
2017-08-16 08:19:06 +02:00
33efd89ef8
Disable pusher assist for quadchute failsafe
2017-08-16 08:19:06 +02:00
66bb7adc4c
simplify back transition throttle scaling
2017-08-16 03:06:13 +02:00
6b9a8daceb
Correctly name b_trans_thr and remove contraint
2017-08-16 03:06:13 +02:00
ff669ee645
Move vtol standard params
2017-08-16 03:06:13 +02:00
7a8d3c4ab2
Correctly check reverse thrust conditions
2017-08-16 03:06:13 +02:00
4396e78d12
Allow negative thrust on reverse throttle
2017-08-16 03:06:13 +02:00
01d9212a29
Widen pusher throttle constraint
2017-08-16 03:06:13 +02:00
e5a55cd142
Support negative thrust for back transition
2017-08-16 03:06:13 +02:00
59d81ee0f1
Clarify parameters
2017-08-16 03:06:13 +02:00
fbbe3d1f41
Check velocity valid and param description
2017-08-16 03:06:13 +02:00
50894e8615
VTOL control back transition ramp up time
2017-08-16 03:06:13 +02:00
560e9e88dc
Apply slew rate to reverse thrust
2017-08-16 03:06:13 +02:00
e9516db5b0
Back transition duration based on deceleration m/s/s
2017-08-16 03:06:13 +02:00
2e481867e5
Consider back transtition complete when MPC_XY_CRUISE is reached
2017-08-16 03:06:13 +02:00
1a0c23d8b3
Support thrust reversal for vtol back transition
2017-08-16 03:06:13 +02:00
f50052f290
landdetector mc: widen acceptance threshold after landing instead of arming
2017-08-15 10:30:29 +02:00
3c26c11144
circleci force git to use git://
2017-08-14 17:03:06 -04:00
a3645b1ed1
travis-ci force git to use git://
2017-08-14 17:03:06 -04:00
891b2f640d
TAPv1: Schedule sensor priority higher
2017-08-13 11:40:54 +02:00
00b65f38aa
FMUv5: Schedule work queue with higher priority
2017-08-13 11:40:54 +02:00
c2341ad7f6
FMUv4PRO: Schedule work queue with higher priority
2017-08-13 11:40:54 +02:00
6f5499af7d
FMUv4: Schedule work queue with higher priority
2017-08-13 11:40:54 +02:00
c6f9cd84d0
FMUv4: Schedule work queue with higher priority
2017-08-13 11:40:54 +02:00
b2572a5795
FMUv2: Schedule work queue with higher priority
2017-08-13 11:40:54 +02:00
fa482b4ebd
Racing boards: Default FMU to task as there is plenty of RAM to do this.
2017-08-13 11:39:44 +02:00
9af9475541
RTPS: Ignore example processes
2017-08-13 11:39:00 +02:00
23c790650a
FMUv5: Enable DDS
2017-08-13 11:38:14 +02:00
0e661e5a84
FMUv4PRO: Enable DDS
2017-08-13 11:38:00 +02:00
2adb9e8c4f
FMUv4: config style
2017-08-13 11:37:34 +02:00
fa123db5c3
FMUv3: Enable DDS
2017-08-13 11:37:15 +02:00
9e312e8dba
Uploader: Do not show timeout for larger binaries when everything is still as expected.
2017-08-13 11:36:12 +02:00
861879c6d3
Widen threshold for standard gyro consistency check
...
Without temperature compensation the default is too narrow.
2017-08-12 12:50:46 +02:00
67e470b0e1
px4fmu-v5:Use arch/polarity agnostic Power control macros
...
Use the board supplied Power control macros, in the
the board_peripheral_reset.
This abstacts the polarity from the code. Therefore changes
in signal sense can be made, just in the board config.
2017-08-12 08:02:41 +02:00
5506588a31
px4fmu-v5:Add conditional support for Test RC00 HW
...
RC00 had an active high VDD_5V_PERIPH_EN
PC01 has an active low VDD_5V_PERIPH_EN
RC00 Test hardware did not use an LTC4417
While RC00 HW is still in circulation you can build with
PX4_FMUV5_RC00 defined and BOARD_HAS_LTC4417 undefined.
The default is PX4_FMUV5_RC01 and BOARD_HAS_LTC4417 defined.
2017-08-12 08:02:41 +02:00
55a2930cdb
vmount: reduce stack size to 1900 as recommended by @bkueng (maximum used memory observed: 1552)
2017-08-11 14:37:48 +02:00
b702daf40e
vmount: virtual destructor
2017-08-11 14:37:48 +02:00
c3faf587cc
vmount: make the parameter descriptions a little nicer
2017-08-11 14:37:48 +02:00
281ee5e5af
vmount: increase stack size
2017-08-11 14:37:48 +02:00
b8d389ca4e
vmount: properly unadvertise uorb topics when stopping or re-configuring vmount. Othwerise subsequent advertise calls may fail (only ever witnessed for _mount_orientation_pub)
2017-08-11 14:37:48 +02:00
cbe3627b8c
vmount: set more sensible default parameters for the mount system and component IDs
2017-08-11 14:37:48 +02:00
89aeea7e8e
vmount: publish mount angle commands in proper order and units
2017-08-11 14:37:48 +02:00
4eb0ffc554
vmount: update control_data if already_active is true
...
control_data needs to be able to be set to nullptr in case if the input
is already active. Otherwise the output will think there's always new
requests and reset it's state.
2017-08-11 14:37:48 +02:00
73d23742ea
vmount: rate-limit the update of the outputs
...
This avoids a busy-loop if the input is listening for vehicle commands and
the output publishes vehicle commands.
2017-08-11 14:37:48 +02:00
923cdbcbfb
vmount mavlink input: process commands only if the target matches our sys & comp id
2017-08-11 14:37:48 +02:00
Beat Küng
Julian Oes
sanderux
Dennis Mannhart
Daniel Agar
Lorenz Meier
David Sidrane
Nicolas de Palezieux