Issues due date / Add labels to issues (push) Has been cancelled
Doxygen / build (push) Has been cancelled
- possibility to use basic PID with steering rover
- fix navigation
- add support for mission mode
- fix simulator (orientation was wrong, leading to opposite steering
between sim and reality)
- add support of 2 wheels rover in simulation
- add and update config files
- generic pan/tilt gimbal control with several builtin modes
- gimbal position and orientation configurable
- specialization possible for gimbals not matching the default scheme
(with an example using the Caddx GM3 3 axis gimbal)
- remove all the old unused code using gimbal control
* Add invensense3_456 driver for ICM45686 IMU
* Add support for 9th SPI slave
* Add SPI_SLAVE9 with PG01 as Chip Select on Cube Orange
Used in the Cube Orange Plus LTS / "shiny" release for the non-isolated IMU (on SPI bus 1)
* Add cube_orangeplus_lts board with new ICM45686 IMUs
Issues due date / Add labels to issues (push) Has been cancelled
Doxygen / build (push) Has been cancelled
* Disable GPS_Fix for a given number of seconds in ABI messages for testing purposes.
* Add protection to by default not allow disabling GPS
* Add example
* Covert into TRUE/FALSE since the define in seconds is not used.
Issues due date / Add labels to issues (push) Has been cancelled
Doxygen / build (push) Has been cancelled
New message can set position, speed, acceleration and heading setpoint
for an accurate trajectory tracking.
Also fix the update of ref when h_ref is disabled.
Issues due date / Add labels to issues (push) Has been cancelled
Doxygen / build (push) Has been cancelled
* Wait for shaking to take-off
* Update sw/airborne/modules/nav/nav_shakestart.c
* Use Shake-Start in Flightplan
* Remove disable-GPS, ahrsAligned, DSM_On/Off, Wind
* fix make tests
Issues due date / Add labels to issues (push) Has been cancelled
Doxygen / build (push) Has been cancelled
* rotwing airframe files v3i-k and conf
update repaired rotwing drones v3d an v3e
turn calc asml baro to true for all rotwing airframes
* remove old magneto calib v3d and v3e
* v3e flown in VB
* update imu filter v3i and v3j
turn off highspeed logging imu
calib all accelero on v3j
add all 3 imu filters v3j
* v3d all imu calibrations
v3d magneto calib
* turn off pfc debug, rotwing put air_data defines in common airframe file
* add magneto rotation for i,j,d
* merge with master
* rotwing airframe files v3i-k and conf
update repaired rotwing drones v3d an v3e
turn calc asml baro to true for all rotwing airframes
* try cube imu 1 on v3d
* pull some things from v3b
* small change in rotwing liftd eff scheduling
* re-do v3j magneto calibration
* v3e magneto rotation
* fix consistency of defines
* revert changes eff scheduling
* make compatible with rebase
* rotwing demo module and remove rotwing effectiveness RC switch
* fix small mistake
* fix small logic error
* fix RC switch range
* make skew values customizable
* small cleanup
* remove rotwing_demo module and replace by flight plan WIP
* rotwing move some settings back to individual airframes
* some changes
* choose a different ac id for demo drone
Issues due date / Add labels to issues (push) Has been cancelled
Doxygen / build (push) Has been cancelled
* Activate barometric altitude in fixedwing Disco
* Define not in NPS
* Replaced board by sensor driver...
* Fix with drone
* MAG Feedback in AHRS_DSM_FLOAT tested extensively.
Issues due date / Add labels to issues (push) Has been cancelled
Doxygen / build (push) Has been cancelled
Docker update / build_docker_image (push) Has been cancelled
The Ranger T1 is a tilt-rotor hybrid plane. As a first basic approach,
two separated controls are used for hovering (INDI) and forward flight
(PID). The mixing is done by a dedicated module and the autopilot is
customized to support the specific modes.
A simple PID controller is added to the rotorcraft firmware as it is not
possible to directly reuse the one from fixedwing firmware.
In a future work, a full INDI version might be used, but this approach
can still serves as an example of customized autopilot.
A simulation model for JSBSim is also provided.
Add a parameter to the takeoff function to specify the height at which the takeoff is considered finished.
A negative value tells that the default value (configurable from airframe file) should be used.
Update demo FP
* [uavcan] Start updating UAVCAN to latest version.
Now renamed DroneCAN.
* [uavcan] Update airspeed.
* [uavcan] Update power.
* [uavcan] Update range sensor.
* [uavcan] WIP actuators.
* [dronecan] Fix makefile for new installations
- The Makefile doesn't execute the .sync .update when added to the .PHONY section
- The DSDL folder doesn't exist before the .sync .update of the DSDL
* [can] Add documentation for USE_CANx define and fix dronecan
* [dronecan] Update actuators
* [dronecan] Cleanup actuator feedback
---------
Co-authored-by: Fabien-B <Fabien-B@github.com>
Co-authored-by: Freek van Tienen <freek.v.tienen@gmail.com>
Add CAN over Serial Link bridge.
Allows to use DroneCAN GUI Tool to monitor all DroneCAN devices on the bus through the autopilot.
Co-authored-by: Fabien-B <Fabien-B@github.com>
* Threads and synchronization abstractions for paparazzi.
* Test module for the threads abstraction.
* Replace old mutexes by the new ones.
---------
Co-authored-by: Fabien-B <Fabien-B@github.com>
* [generator] generate unique ID and names table for modules
* [state] add accessors for the state origin
* [state] don't access directly to state origin, use getters
* [state] filter inputs with module ID
* [ahrs] convert AHRS modules to state input filter
- selection of ahrs with settings from each module
- init functions for each ahrs modules
- remove old chimu
* update unit test
* [ins] decoupled INS implementation
To allow multiple INS at the same time:
- remove weak functions from ins.c
- remove the INS_TYPE_H define
- use ABI message to trigger INS reset
* [state] protect for c++
Gautier Hattenberger
OpenUAS
Fabien-B
NoahWe
lthoma5
Christophe De Wagter
Alejandro Rochas Fernández
Freek van TienenandChristophe De Wagter
Jesús Bautista Villar
Florian SansouandFlorian Sansou