Mirrors_Framework/PX4-Autopilot
1
0
Fork 0
mirror of https://github.com/PX4/PX4-Autopilot.git synced 2026-06-01 11:06:04 +08:00
Code Issues Actions 16 Packages Projects Releases Wiki Activity
34,582 Commits 884 Branches 164 Tags
rc-handling
Commit Graph

1822 Commits

Author SHA1 Message Date
Beat Küng 14ef009aab logging: add SDLOG_MODE = -1 to disable logging completely 2019-03-21 08:15:48 +01:00
Julien Lecoeur 5f06c6a1aa VTOL: add parameter to prevent flight if roll direction was not checked 
Mark V19_VT_ROLLDIR @category system

Throttle down mavlink critical msg

Send 0 actuator_output for safety

VTOL: unset v1.9 roll direction safety check param for builtin airframes
 2019-03-15 00:48:23 -04:00
Beat Küng 6c3e79f361 mc airframes: reduce I gains a bit 
A side-effect of the previous commit is that the integral is loaded up
during a flip, which leads to visible bounce-backs after a flip.
Reducing the I helps, but there's a trade-off and we'll need a better
solution.
 2019-03-01 07:42:18 +01:00
Hamish Willee 5132368378 Flying Wing init files: Fix up main output docs 2019-02-25 12:01:27 +01:00
Hamish Willee e5dbd39ca6 Fx79 Frame: Reverse aileron outputs 2019-02-25 12:01:27 +01:00
DanielePettenuzzo 24f77ec5a4 rcS: start camera_capture later in script 2019-02-10 18:07:44 -05:00
DanielePettenuzzo 6b65eb2225 camera feedback: remove CAM_FBACK_MODE param. CAM_CAP_FBACK from camera capture driver will be used instead. 2019-02-10 18:07:44 -05:00
DanielePettenuzzo d49752141d rename camera capture feedback param and move it from camera_feedback module to camera capture driver 2019-02-10 18:07:44 -05:00
DanielePettenuzzo 42afc88285 add camera trigger feedback (input capture when camera actually takes the photo) 2019-02-10 18:07:44 -05:00
bresch faa8b6fe6d Camera Capture - enable capture at startup 2019-02-10 18:07:44 -05:00
Mohammed Kabir 94bb02a9c7 Add camera_capture driver 2019-02-10 18:07:44 -05:00
Daniel Agar 2d922b5cb4 FW airframe defaults relax EKF2 GPS checks 2019-02-04 11:02:38 -05:00
Beat Küng aa020eb28e airframes: add Holybro QAV250 2019-02-04 09:31:02 -05:00
Julien Lecoeur 6c1d85716c Convergence: Do not lock elevons in multirotor mode 
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
 2019-02-03 22:33:42 -05:00
Julien Lecoeur 15f9b70431 Claire: Do not lock elevons in multirotor mode 
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
 2019-02-03 22:33:42 -05:00
Julien Lecoeur 9b5dd1596f FireFly6: Do not lock elevons in multirotor mode 
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
 2019-02-03 22:33:42 -05:00
Daniel Agar 8dc0509989 mpu9250: split icm20948 support out into new separate driver 2019-01-30 09:29:08 +01:00
Daniel Agar 1ded189f58 ROMFS rcS execute (optional) rc.board_defaults after AUTOCNF set 2019-01-18 11:23:01 -05:00
Daniel Agar fef65bf5c8 ROMFS split rc.board into defaults, sensors, and extras 2019-01-15 23:52:46 -08:00
Claudio Micheli d1da46ef46 Added generic UART configuration. 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2019-01-15 09:17:24 +01:00
Claudio Micheli 7124cbf3af Fixed CI broken build. Made TELEM2 default port. 
Device port can be set via SENS_EN_CM8JL65 parameter:
SENS_EN_CM8JL65 = 0 -> Disabled
SENS_EN_CM8JL65 = 1 -> Enabled on TELEM2
SENS_EN_CM8JL65 = 2 -> Enabled on TELEM1

Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2019-01-15 09:17:24 +01:00
Claudio Micheli e4381bfc87 Added sensor enable/disable parameter (SENS_EN_CM8JL65). 
Disabled by default.

Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2019-01-15 09:17:24 +01:00
bresch 766f911005 beta75 - Reduce MC_YAWRATE_P to avoid oscillations when battery is fully charged 2019-01-14 18:38:31 +01:00
bresch 118848d261 beta75 - Adjust PWM_MIN and set number of cells 2019-01-14 18:38:31 +01:00
Jake Dahl 1699c577c3 Fixed an issue with a local variable that should have been a member variable. Increased the P term to reduce rise time. Removed feedforward as it was not neccessary. Removed some custom commands that didn't serve much of a purpose. 2019-01-08 22:36:09 +01:00
Daniel Agar 1b8c2c82d5 px4flow start in rc.sensors instead of per board (#11123) 
- fixes #11009
 2019-01-01 11:39:40 -05:00
Daniel Agar 1f9b833342 ROMFS 4041 change nsh shebang to /bin/sh 2018-12-24 19:27:04 +00:00
Beat Küng 2790cace4f beta75X aiframe: exclude on most boards (only used on Omnibus) 2018-12-23 15:49:37 -05:00
Beat Küng 9f642c7ea7 airframes: add a config for the BetaFPV Beta75X 2S Brushless Whoop 2018-12-23 15:49:37 -05:00
Matthias Grob 95b472277c TBS Caipirinha: Prevent ESC beeping all the time 
Setting PWM_DISARMED to 0 results in no PWM output to the ESC for the pusher motor.
Most ESCs start beeping endless in short intervals if they don't get a signal.
I remove changing this parameter which is 900 by default to always command the motor to stand still.
 2018-12-23 12:21:30 +01:00
Julian Oes 3ebf030a02 ROMFS: change shebang from #!zsh to #!/bin/sh 
This was required for shellsheck.
 2018-12-19 07:36:43 +00:00
Beat Küng 6a5108269e rcS tone_alarm: fix CBRK_BUZZER 
tone_alarm was started before the parameters were loaded, and the first
tune was played before that as well. CBRK_BUZZER was then read as default,
ignoring the user-configured value.

We now start tone_alarm after we load the parameters. Note that a
previously published startup tone or SD card error will still be played.
 2018-12-15 10:01:02 -05:00
David Sidrane 11f9925b02 rcS,rc.serial.jinja:ensure proper unset hygiene 
Delete auto generated vars, and others that were missed.
 2018-12-12 15:14:11 -05:00
dakejahl 311c0941c9 Teal One airframe improvements for full support (#10860) 
* added a parameter for enabled the smart battery
* start tel1 and tel2 at 921600 and max rate
* turned up the max tx rate on mavlink streams for telem1 and telem2
* turned off mavlink stream for tel1 in 4250_teal. This is connected to TX1 FTDI UART and has issues.
* moved check to 4250 board ID to start mpu9250s for Teal airframe into fmuv4 rc.board.
 2018-12-05 09:49:58 -05:00
Daniel Agar 3a036021ba ROMFS defaults drop floating point decimal 2018-12-04 22:57:53 -05:00
Daniel Agar ecbf6ea77b ROMFS multicopter airframes don't call other airframes (4001/4002) 
- fixes #10980
 2018-12-04 22:57:53 -05:00
flochir ab9e9793a0 ICM20948 integration into MPU9250 driver (#10116) 
* Integrated preliminary ICM20948 support into MPU9250 driver.
Fixed temperature conversion for MPU9250/ICM20948.
* Included missing check for PX4_I2C_OBDEV_MPU9250 in main.cpp.
* Added explicit bus for internal MPU9250 on Pixhawk 2.1 to avoid implicit start
of an externally attached device with wrong orientation.
 2018-12-04 22:15:02 -05:00
Daniel Agar d4e06e517a delete drv_gpio.h, modules/gpio_led, and fmu GPIO ioctls 2018-12-03 16:30:39 +01:00
Daniel Agar 3e9e5ed372 ROMFS move airframes to subdirectory 2018-12-01 10:03:19 -05:00
Daniel Agar 7f0d2f23b7 move atmel_same70xplained init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 4240abad73 move bitcraze_crazyflie init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 0e980c1f83 move gumstix_aerocore2 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar a3fed608a6 move airmind_mindpx-v2 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar c9a2033c5b move auav_x21-v1 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar a8b91c7ac9 move intel_aerofc-v1 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar a4830f8d7b move omnibus_f4sd init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 60ade5d82b move av_x1-v1 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar aab08ad6fc move nxp_fmuk66-v3 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar c6a502f150 move fmu-v2/v3 init to rc.board 2018-12-01 10:03:19 -05:00
Daniel Agar 6c2436c2ca move fmu-v4pro init to rc.board 2018-12-01 10:03:19 -05:00