* Add BananaPi BPI-F3 BSP support
Add RISC-V supervisor support to the rv64/gnu port and
provide a complete board support package for the BananaPi BPI-F3
(SpacemiT K1 SoC, X60 cores).
Port changes (risc-v64/gnu):
- Guard all CSR accesses with TX_RISCV_SMODE to select S-mode registers
(sstatus/sepc/sie/sret) vs M-mode (mstatus/mepc/mie/mret) in
context_save, context_restore, schedule, system_return,
interrupt_control, and stack_build.
- Add S-mode TX_INT_ENABLE/TX_DISABLE and inline TX_RESTORE macros
to tx_port.h.
- Add TX_RISCV_SMODE CMake option to CMakeLists.txt.
BananaPi BPI-F3 BSP (example_build/bananapi-f3):
- Boot flow: FSBL → OpenSBI (M-mode) → U-Boot (S-mode) → ThreadX
- S-mode trap handler with context save/restore integration
- SBI legacy ecall timer at 10 Hz (24 MHz timebase)
- PLIC driver with S-mode context, stale-IRQ drain, and callbacks
- PXA-compatible UART0 console (115200 8N1)
- Linker script at 0x200000 load address
Tested on risc-v board, BananaPi BPI-F3 hardware.
Signed-off-by: Akif Ejaz <akif.ejaz@10xengineers.ai>
* Fixed S-mode context restore and PLIC spurious IRQ handling
- tx_thread_context_restore.S (non-nested path): set SPIE(0x20) alongside
SPP(0x100) so sret re-enables interrupts in the restored thread.
- tx_thread_context_restore.S (both S-mode paths): use FS=Dirty (0x6000)
instead of FS=Initial (0x2000) to match tx_thread_schedule.S and prevent
FP register corruption across context switches.
- plic.c (plic_irq_intr): return early when plic_claim() yields 0 (no
pending interrupt) to avoid completing a spurious IRQ ID 0, which is
undefined behavior per the PLIC spec.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Signed-off-by: Akif Ejaz <akif.ejaz@10xengineers.ai>
Co-authored-by: Frédéric Desbiens <frederic.desbiens@eclipse-foundation.org>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add LX8 support for > 32 interrupts
Also fix inconsistent SWPRI define in interrupt handler
* ThreadX: Fix context switch logic
- Disable interrupts prior to allocating a large exception frame;
only reenable them after deallocating the extra memory.
- Any user tasks with stacks based on TX_MINIMUM_STACK do not
have sufficient space for both a context switch frame and an ISR
frame; ill-timed interrupts were causing stack overruns.
* ThreadX: Interrupt fixes for TX_ENABLE_EXECUTION_CHANGE_NOTIFY
- Must reload register trashed by notify hook function call
- Must ensure PS.WOE is set before using call8
- Remove unused XT_USE_INT_WRAPPER define and associated changes,
which had a bug in XEA2 usage
- Fix another case where enabling the thread notify hooks for
call0 ABI corrupted a register
* ThreadX: Support for __DYNAMIC_REENT__
- ThreadX change to handle dynamic reent for both newlib and xclib
- Adapt ThreadX xclib interface code to handle dynamic reent pointers
* ThreadX: Xtensa execution profiling support
- Update upstream execution profiling for Xtensa port
* ThreadX: Update xtensa port readme
* ThreadX: Add Xtensa example to EPK
- tx_execution_profile.h now defines an Xtensa example
in addition to the existing Cortex example
* ThreadX: Add xtensa.cmake
* ThreadX: Update XSHAL_CLIB ifdefs in __getreent()
- Prevent a fall-through with no return value when neither
xclib nor newlib are used.
* Fixed MPIE being cleared leading to have interrupts being disable when returning from machine mode
* Removed wrong register operand and replaced by immediate value
The Cortex-M33, M55, and M85 GNU ports incorrectly include tx_initialize_low_level.S as a library source in CMakeLists.txt. This file is board-specific initialization code that users must
customize for their hardware, and including it in the library causes linker conflicts when users provide their own implementation (e.g., via CMake FetchContent).
This change aligns these ports with the established pattern used by
Cortex-M0/M3/M4/M7 GNU ports:
- Move tx_initialize_low_level.S from src/ to example_build/
- Remove it from CMakeLists.txt target_sources
- Add sample_threadx.c to example_build/ for consistency
Signed-off-by: An Dao <webmaster@taktflow-systems.com>
* Fixed race condition and message loss in Cortex-M GNU, AC6, and IAR ports (#516)
- Added compiler memory barriers to BASEPRI management functions in tx_port.h.
- Added architectural barriers (DSB/ISB) to scheduler return paths in tx_port.h and tx_thread_system_return.S to prevent fall-through before context switch.
- These changes address spurious thread resumption and lost messages, especially when TX_NOT_INTERRUPTABLE is enabled.
- These changes ensure that pending interrupts (specifically PendSV) are recognised before subsequent instructions are executed, following Kairalite's feedback and ARM architectural guidelines.
Assisted-by: Gemini (Gemini 2.0 Flash)
-----
* Added a comment in common/tx_queue_cleanup to document why the NI path omits revalidation guards
- In `TX_NOT_INTERRUPTABLE` mode, the caller keeps interrupts disabled across the entire cleanup call, so the race window that makes the guards necessary in the interruptable path cannot occur. Add a comment explaining this, and noting that all paths that resume a suspended thread clear tx_thread_suspend_cleanup before calling
_tx_thread_system_ni_resume, making double-cleanup impossible.
This prevents future false-positive suggestions (e.g. from AI tools) to add redundant checks to the NI path.
Relates to: eclipse-threadx/threadx#516
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
This update adapts the ThreadX low-level kernel routines
for RV32, including:
- startup and initialization logic
- context save/restore implementations
- interrupt control and scheduler entry
- thread stack build and system return paths
- timer interrupt handling
- made it complient as per new risc-v64/gnu
& threadx style
- added reademe for risc-v32/gnu port
These changes provide full low-level support needed to run
ThreadX on RISC-V32 targets.
Signed-off-by: Akif Ejaz <akif.ejaz@10xengineers.ai>
This update adapts the ThreadX low-level kernel routines
for RV32, including:
- startup and initialization logic
- context save/restore implementations
- interrupt control and scheduler entry
- thread stack build and system return paths
- timer interrupt handling
- made it complient as per new risc-v64/gnu
& threadx style
- added reademe for risc-v32/gnu port
These changes provide full low-level support needed to run
ThreadX on RISC-V32 targets.
Signed-off-by: Akif Ejaz <akif.ejaz@10xengineers.ai>
Christos Papadopoulos
Ian Thompson
An Dao
Francisco Manuel Merino Torres
Jonathan Blanchard
shuta.lst