Commit Graph

247 Commits

Author SHA1 Message Date
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 66eacd24bc px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
2020-04-11 21:16:10 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out
- split out header
2020-03-31 19:12:31 -04:00
Peter van der Perk 9490f41f85 rddrone-uavcan146 removed shared clock between hrt & rtc
Removed non-existing SW2 button
Fixed SW3 button pinmux
Added FlexCAN pin definition
hrt use external sirc clock
rtc use 32khz lpo clock
2020-03-28 06:31:11 -07:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Peter van der Perk a4e6f96365 rddrone-uavcan146: HRT & RTC timer support 2020-03-25 16:37:28 -04:00
Beat Küng 7ea8dff8db spi: do not deselect other chip-selects
And make sure on reset & init everything is deselected.

Reduces CPU load on a pixhawk cube by almost 1%.
2020-03-24 09:46:20 -04:00
Beat Küng 6a41c9e417 refactor fxos8701cq: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 5fa4cd1019 refactor fxas21002c: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 974cb30b6d nxp_rddrone-uavcan146 ignore i2c for now (platform support is incomplete) 2020-03-24 09:46:20 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h
chip-selects are deselected in stm32_spiinitialize()
2020-03-24 09:46:20 -04:00
Beat Küng f74474dd55 fmuk66-v3: fix spi bus numbering passing to px4_spibus_initialize
Fixes an error on bootup ([boot] FAILED to initialize SPI port 0). Other
than that, everything was working.
2020-03-24 09:46:20 -04:00
Beat Küng 6588dd0861 refactor icm20948: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 00280d55c2 refactor rm3100: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426 boards: enable NuttX SPI DMA buffers
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
2020-03-22 19:24:26 -04:00
Beat Küng 8ebde51648 refactor hmc5883: use driver base class
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
2020-03-17 23:31:17 -04:00
Beat Küng 47b329cc54 refactor bmm150: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 1710cd9648 refactor px4flow: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng aeadf54a74 refactor bmp280: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 22a38453ab refactor bmi055: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 969a77f889 refactor mpu6000: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng be0a205438 refactor ist8310: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 58f386a81c refactor pmw3910: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar f9794e99f8 move hover_thrust_estimator to new module (mc_hover_thrust_estimator)
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
2020-03-11 21:20:54 -04:00
Daniel Agar 46a09b711f boards: increase STDIO buffer size where we can afford it 2020-03-11 17:19:44 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng 1851665fab boards: add new spi+i2c config
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
2020-03-10 10:11:43 -04:00
Daniel Agar 4698a09b98 delete unmaintained outback challenge (OBC) bottle drop example 2020-03-05 14:09:31 -05:00
David Sidrane cad3a811d2 nxp_fmurt1062-v1:Run from OCRAM 2020-03-02 10:20:33 -08:00
David Sidrane 3ed643f3d7 fmurt1062-v1:Update imxrt_flexspi_nor_boot configurable 2020-03-02 10:20:33 -08:00
Daniel Agar d7c3e1066a uavcannode updates and px4_fmu-v4_cannode example
- drivers/uavcannode add baro, mag, gps publications
 - delete old px4_cannode-v1 board
 - add stripped down simple rcS for CAN nodes
2020-02-16 12:11:54 -05:00
Beat Küng ccf2078c66 nxp/fmurt1062-v1: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 8cd9afc19a imxrt io_timer: remove some fields from io_timers_t and split out channel indexes
IOMUX uses different enumeration from GPIO pin + port, so we cannot use
.gpio_out, and add a .gpio_portpin.
2020-02-13 03:49:16 -08:00
Beat Küng d74d094940 nuttx configs: disable nuttx timers which are used for PWM output
These are not required, and to be consistent we enforce disabling them now.
2020-02-13 03:49:16 -08:00
Beat Küng c01f6811d0 nxp/fmuk66-v3: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 62b4f3487a io timer: remove some fields from io_timers_t and split out channel indexes
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t

Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
2020-02-13 03:49:16 -08:00
David Sidrane 2193cce50b rddrone-uavcan146:Board Added 2020-02-12 10:29:27 -05:00
Beat Küng b399698306 ist8310: remove calibration code
- it does nothing useful
- increases boot time by 2 seconds on pixhawk 4 due to a poll timeout:
IST8310 on I2C bus 3 at 0x0e (bus: 100 KHz, max: 400 KHz)
WARN  [ist8310] ERROR: TIMEOUT 2
2020-02-06 12:39:39 -05:00
David Sidrane 78c7f98ef1 nxp_fmurt1062-v1:Memory Reorg 2020-01-29 13:54:20 -05:00
David Sidrane 962716a7c3 nxp_fmurt1062-v1:Performance tuning 2020-01-29 13:54:20 -05:00
David Sidrane a8720057fd nxp_fmurt1062-v1:RC is on LPUART6 ttyS5 2020-01-29 13:54:20 -05:00
David Sidrane eb30041958 nxp_fmurt1062-v1:PROBES:carry includes and path needed 2020-01-29 13:54:20 -05:00
David Sidrane ef5ed2e43c nxp_fmurt1062-v1:OC remove Pull up - OC have series 47K 2020-01-29 13:54:20 -05:00
David Sidrane ec0f004a7b fmurt1062-v1:Correct SPI1_DRDY4_ICM20602 2020-01-29 13:54:20 -05:00