* fix(libcpu/arm): correct format specifiers in GIC dump functions
Fix -Wformat warnings in arm_gic_dump_type() and arm_gic_dump() for
both GICv2 (gic.c) and GICv3 (gicv3.c):
- %p with rt_uint32_t physical address -> 0x%08x (non-pointer passed to
%p is undefined behavior)
- %d with unsigned int / unsigned long -> %u (signed/unsigned mismatch)
- Add explicit (unsigned int) cast for GIC version extracted with 0xfUL
These warnings appear when compiling Cortex-A BSPs with -Wall -Wformat.
* style: format code with clang-format
* style: format code with clang-format
* [libcpu][arm] Fix undefined signed shift in GIC RWP macros
---------
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Eight-core boot on SpacemiT K1 could stall with one CPU in the
unlock LR/SC loop, two CPUs allocating tickets, and the remaining
CPUs waiting for the scheduler lock.
Replace LR/SC ticket allocation with amoadd.w.aqrl and release the
lock with a halfword owner update. Order critical-section accesses
after acquiring ownership and before releasing it.
Verified eight-core boot on K1 with temporary diagnostics and
reservation-clearing changes removed.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [libcpu][risc-v] Refactor the RISC-V architecture port
Introduce an opt-in unified RISC-V common layer for RV32 and RV64 while keeping existing BSPs on the legacy implementation during migration.
- use ARCH_RISCV and ARCH_CPU_64BIT for architecture and XLEN selection
- unify context, trap, MMU, cache, timer, SBI, SMP and ISA handling
- add PLIC, CLIC, ACLINT, APLIC and IMSIC support
- map physical hart IDs to contiguous logical CPU IDs
- add T-Head vendor overrides while preserving legacy ports
- migrate qemu-virt64-riscv with RV32 and RV64 support
- update clock_time, MM, LWP, OFW, PCI and Rust integration
Existing BSPs continue using legacy_common or common64 unless they select RT_USING_RISCV_NEW_COMMON.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [libcpu][risc-v] skip disabled CPU nodes in early FDT walk
Rbb666 noted that rt_hw_fdt_install_early() walked every /cpus child
without checking status, so disabled cores still joined hart registration
and MMU capability probing. Skip nodes that are not okay/ok via
rt_fdt_device_is_available() before reading reg or mmu-type.
Signed-off-by: seteiro <chenmoushun@163.com>
* [libcpu][risc-v] Fix per-CPU page table mapping
- reuse existing non-leaf page table entries when mapping per-CPU areas
- reject leaf entry conflicts instead of overwriting mappings
Signed-off-by: GuEe-GUI <2991707448@qq.com>
---------
Signed-off-by: GuEe-GUI <2991707448@qq.com>
Signed-off-by: seteiro <chenmoushun@163.com>
Co-authored-by: seteiro <chenmoushun@163.com>
Enable RT_USING_HW_STACK_GUARD on Cortex-M4, which was previously only
available on Cortex-M7 and Cortex-M33.
Core porting (libcpu/arm/cortex-m4/):
- Add mpu.c/mpu.h/mputype.h aligned with the Cortex-M7 MPU layer. The only
difference is the default memory type attribute: Cortex-M4 has no L1 cache,
so the cacheability bits are reduced to three cases.
- Add rt_hw_stack_guard_init() to cpuport.c.
- Add missing #include <rtconfig.h> to context_gcc.S and invoke
rt_hw_mpu_table_switch() in the PendSV context switch path.
- Update SConscript to exclude mpu.c when memory protection is disabled.
BSP reference (bsp/stm32/stm32f407-fk407m2-zgt6/):
- board.h: include rtthread.h and define NUM_STATIC_REGIONS.
- board.c: define static_regions[] marking the Flash region read-only,
guarded by RT_USING_MEM_PROTECTION so it is not enabled by default.
- reorganize common Raspberry Pi drivers under the device framework
- add the Raspberry Pi 5 BSP, configuration and documentation
- add BCM2712 and DesignWare AXI DMA controller support
- distinguish BCM2712 DMA32 and DMA40 channels by channel mask
- restore DesignWare AXI DMA enable bits after controller reset
- support a shared AXI maximum burst length across DMA channels
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [dm][dma] update DMA interface
Extend DMA mapping to honor OFW dma-ranges even
when no reserved memory pool is present,
and add PCI host-bridge DMA-region translation for PCI devices.
Prefer 32-bit-addressable allocations for translated devices,
improve pool allocation fallbacks and synchronization,
and establish a linear mapping for installed DMA pools when possible.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [dm][dma] fixup PL330 work flow
Fix PL330 channel allocation so device-tree cells
select peripheral request lines rather than execution channels.
Generate proper peripheral DMA microcode using DMAWFP, DMALDP, DMASTP, and DMAFLUSHP,
encode burst lengths correctly,
honor transfer direction and non-secure attributes,
and allocate microcode from DMA-coherent memory.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* style: format code with clang-format
* style: format complete changed files with clang-format
* drivers: dma: fix diagnostic format types
* style: format DMA changes for current master
---------
Signed-off-by: GuEe-GUI <2991707448@qq.com>
- Implement _noncache() and _cache() function features;
- Correct rt_hw_mmu_setup function for NORMAL_NOCACHE_MEM type property configuration;
- Update C908/C906 PTE macro definition configuration;
RT-Thread BSP Static Build Check / 🔍 Summary of Git Diff Changes (push) Has been cancelled
RT-Thread BSP Static Build Check / ${{ matrix.legs.RTT_BSP }} (push) Has been cancelled
doc_doxygen / deploy (push) Has been cancelled
pkgs_test / change (push) Has been cancelled
utest_auto_run / A9 :components/dfs.cfg (push) Has been cancelled
utest_auto_run / A9 :components/lwip.cfg (push) Has been cancelled
utest_auto_run / A9 :components/netdev.cfg (push) Has been cancelled
utest_auto_run / A9 :components/sal.cfg (push) Has been cancelled
utest_auto_run / A9-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / AARCH64-smp :default.cfg (push) Has been cancelled
utest_auto_run / A9-smp :default.cfg (push) Has been cancelled
utest_auto_run / RISCV :default.cfg (push) Has been cancelled
utest_auto_run / RISCV-smp :default.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / RISCV :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/ipc.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/mem.cfg (push) Has been cancelled
Weekly CI Scheduler / Trigger and Monitor CIs (push) Has been cancelled
RT-Thread BSP Static Build Check / collect-artifacts (push) Has been cancelled
doc_doxygen / doxygen_doc generate (push) Has been cancelled
utest_auto_run / A9 :cpp11/cpp11.cfg (push) Has been cancelled
utest_auto_run / AARCH64-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / RISCV-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / XUANTIE-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / AARCH64 :default.cfg (push) Has been cancelled
utest_auto_run / A9 :default.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/kernel_basic.cfg (push) Has been cancelled
ToolsCI / Tools (push) Has been cancelled
Weekly CI Scheduler / Create Discussion Report (push) Has been cancelled
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
* [docs][libcpu][arm][cortex-a] add comment for mmu.h
* [docs][libcpu][arm][cortex-a] beautify comment for mmu.h
* [docs][libcpu][arm][cortex-a] delete extra space at the end of lines
1. PSCI port to system power.
2. Support builtin fdt.
3. Update system aspace size.
4. Support DMA memory probe.
5. Fixup not backtrace in Serror for device bus fault.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
1.Add the necessary function declarations for SMP enablement and implement the corresponding
functionalities, including rt_hw_secondary_cpu_up, secondary_cpu_entry, rt_hw_local_irq_disable,
rt_hw_local_irq_enable, rt_hw_secondary_cpu_idle_exec, rt_hw_spin_lock_init, rt_hw_spin_lock,
rt_hw_spin_unlock, rt_hw_ipi_send, rt_hw_interrupt_set_priority, rt_hw_interrupt_get_priority,
rt_hw_ipi_init, rt_hw_ipi_handler_install, and rt_hw_ipi_handler.
2.In the two functions (rt_hw_context_switch_to and rt_hw_context_switch) in context_gcc.S,
add a call to rt_cpus_lock_status_restore to update the scheduler information.
3.If the MMU is enabled, use the .percpu section and record different hartids by configuring
special page tables; if the MMU is not enabled, record them directly in the satp register.
Additionally, add dynamic startup based on core configuration.The .percpu section is only used
when both ARCH_MM_MMU and RT_USING_SMP are enabled. However, there is a certain amount of space
waste since no macro guard is added for it in the link script currently.
4.The physical memory of QEMU started in CI is 128MB, so RT_HW_PAGE_END is modified from the
original +256MB to +128MB. Modify the SConscript file under the common64 directory to include
common/atomic_riscv.c in the compilation process.
Signed-off-by: Mengchen Teng <teng_mengchen@163.com>