Prep for 0.3.14 release

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@898 42af7a65-404d-4744-a932-0658087f49c3

COPYING

@@ -0,0 +1,44 @@
+/*************************************************************************
+ *                                                                       *
+ * COPYING -- Describes the terms under which Nuttx is distributed. A    *
+ * copy of the BSD-style licensing is included in this file. In my       *
+ * words -- I believe that you should free to use NuttX in any           *
+ * environmnet, private, private, commercial, open, closed, etc.         *
+ * provided only that you repect the modest copyright notices as         *
+ * described in license (below).  Please feel free to contact me if you  *
+ * have any licensing concerns.                                          *
+ *                                                                       *
+ *************************************************************************
+ *                                                                       *
+ *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.         *
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>                       *
+ *                                                                       *
+ * Redistribution and use in source and binary forms, with or without    *
+ * modification, are permitted provided that the following conditions    *
+ * are met:                                                              *
+ *                                                                       *
+ * 1. Redistributions of source code must retain the above copyright     *
+ *    notice, this list of conditions and the following disclaimer.      *
+ * 2. Redistributions in binary form must reproduce the above copyright  *
+ *    notice, this list of conditions and the following disclaimer in    *
+ *    the documentation and/or other materials provided with the         *
+ *    distribution.                                                      *
+ * 3. Neither the name NuttX nor the names of its contributors may be    *
+ *    used to endorse or promote products derived from this software     *
+ *    without specific prior written permission.                         *
+ *                                                                       *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS   *
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT     *
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS     *
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE        *
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,   *
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,  *
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS *
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    *
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT           *
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN     *
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE       *
+ * POSSIBILITY OF SUCH DAMAGE.                                           *
+ *                                                                       *
+ *************************************************************************/
+

ChangeLog

@@ -3,3 +3,463 @@
 	* Initial Release
 	* Support for Linux user mode simulation and TI
 	  TMS320C5471 (Arm7) provided
+
+0.1.1 2007-03-14  Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Corrected an error in interrupt level context switching
+	  for C5471
+	* Added fgets() and gets() logic; verified c5471 console read.
+	* Corrected error in reading from the C5471 serial port:
+          Improper use of semaphore can cause deadlock.
+	* Fixed an error in the memory cleanup:  The idle task
+	  cannot take sempahores (because it must always be ready
+	  to run).
+	* Tasks can now accept a configurable maximum number of
+	  input parameters (argc)
+	* _task_init() was divided into separate functions that
+	  require fewer parameters.  This was necessary to keep
+	  the stack usage down for the 8051/2 (which has only
+	  256 bytes of stack).
+	* Attempts to use C5471 console from interrupt handlers
+	  can cause errors. Added a special path for this case.
+	* Refuse calls to sem_wait and sem_trywait from interrupt
+	  handlers.  This was happening because interrupt handlers
+	  were calling printf-like functions.
+	* Added strtok() and strtok_r()
+	* Added a simple shell called nsh (see examples/nsh).
+	* Platform support for 8052 is complete but not stable
+	  when the timer interrupt is enabled.  Seems to be an
+	  issue when SP enters indirect address space.
+	* Documentation updates
+
+0.1.2 2007-03-19  Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Add dirent.h, opendir(), readdir(), closedir(), etc.
+	* Add strerror()
+	* Added 'ls' command to nsh
+	* Added C5471 watchdog driver
+	* Fixed another bug where free() is called from IDLE task.
+	  Can't do this; the caller must be able to wait for access
+	  to memory.
+	* Fixed bugs associated with debug output:
+          Cannot do dbg() in middle of context switch logic.
+	  because it may require use of semaphores and cause
+	  additional context switches. lldbg() is safe.
+	* Interrupt must be disabled throughout all context switches.
+	* Separated C5471 serial driver; a shareable part is
+	  in drivers/. ; the C5471 specific part is in arch/C5471.
+	  serial.h defines the interface.
+	* Fixed mq_receive() and mq_send() -- bad memcpy()
+	* Fixed C5471 signal deliver logic: use of dbg() and
+          other actions by use signal handler can alter errno.
+          need to protect errno during signal handling.
+	* Fixed uninitialized variable in filesystem that could
+	  cause various problems
+	* Added a test for roundrobin scheduler.
+
+0.2.1 2007-03-22  Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Fix error in handing signed decimal in vsprintf().
+	* Major restructuring of header files to get closer to
+	  POSIX compliance.
+	* Eliminate compilation warnings that that crept into
+	  recent check-ins
+	* Add kill()
+	* Added support for POSIX timers
+	* Some Documentation updates
+	* Added support for the Neuros OSD / DM320
+
+0.2.2 2007-03-26 Gregory Nutt <spudmonkey@racsa.co.cr>
+	* Created the configs/ directory; separated board configuration
+	  from processor architecture logic
+	* Add memory leak detection test to examples/ostest
+	* Corrected memory leak in OS pthread join logic
+	* Corrected memory leaks in examples/ostest due to failures
+	  to join or detach from pthreads.
+	* Added pthread_once(), pthread_kill(), pthread_sigmask()
+	* Added pthread_barrierattr_*() APIs
+	* Added pthread_barrier_init(), pthread_barrier_destroy(), and
+	  pthread_barrier_wait();
+	* Added pthread barrier test
+	* Added protection so that errno cannot be modified from
+	  interrupt handling.
+	* sched_setparam(), sched_setscheduler() now correctly set
+	  errno; pthread_setscheduler() now returns the correct errno.
+	* Added pthread_setschedprio().
+	* Added directories to hold board-specific header files
+	* Added directories to hold board-specific drivers
+
+0.2.3 2007-03-29 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* mq_receive and mq_send now return errno's appropriately
+	* mq_receive and mq_send are now correctly awakened by signals.
+	* Fixed an unmatched sched_lock/unlock pair in task_delete().
+	* sched_lock must be called in _exit() because operation of
+	  task_delete() can cause pending tasks to be merged and a
+	  context switch to occur.
+	* Added mq_timedreceive() and mq_timedsend()
+	* signal mask is now inherited by both child tasks and threads.
+	* Improved sharebility of stdout among pthreads (only).  Nothing
+	  was broken, but by moving the mutual exclusion logic to a
+	  higher level, the printf output is more readable.
+	* Fixed a bug in file system cleanup:  A list was being deleted
+	  before the buffers contained in the list.
+	* Fixed a bug in the wait-for-message-queue-not-empty logic.
+	* Added a test of timed mqueue operations; detected and corrected
+	  some mqueue errors.
+	* Identified and corrected a race condition associated with
+	  pthread_join.  In the failure condition, memory was being
+	  deallocated while still in use.
+
+0.2.4 2007-04-28 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Verfied c5471 build under Cygwin on WinXP
+	* Makesystem changes to better support different SoCs.
+	* Made arch/c5471/include and arch/dm320/include identical in
+	  preparation for merging into arch/arm
+	* Logic from arch/c5471 and arch/dm320 combined into arch/arm.
+	  arch/c5471 and arch/dm320 are deprecated and will be removed
+	  when the new c5471 and dm320 logic is verified.
+
+0.2.5 2007-05-19 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Corrected some build/configuration issues introduced with the
+	  last release.
+	* Added support for the NXP 214x processor on the mcu123.com lpc214x
+	  development board (untested)
+	* Added support for block devices.
+	* Simulated target now exports a VFAT filesystem
+	* Begin support for VFAT filesystem (missing functionalit)
+	* Added mount() and umount()
+	* Fix bug in memcmp return value
+	* Fix errors in timeslice calculation (several places)
+	* Added missing irqrestore() in timer_deletall().
+	* close() was not closing the underlying device.
+	* Added fsync()
+	* Added strspn() and strcspn()
+
+0.2.6 2007-05-26 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Added unlink(), mkdir(), rmdir(), and rename()
+	* Fixed several serious FAT errors with oflags handling (&& instead of &)
+	* Added FAT support for unlink(), mkdir(), rmdir(), and rename
+	* Added FAT support for opendir(), closedir(), readdir(), seekdir(),
+	  telldir(), rewindir().
+	* Fixed ARM compilation errors introduced in 0.2.5 (that is what I get
+	  for only testing on the simulation).
+
+0.2.7 2007-06-09 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Added stat() to fs layer and to FAT
+	* Fixed reference counting errors associated with mounted filesystems
+	* Added fat_getattrib() and fat_setattrib()
+	* Added statfs() to fs layer and to FAT
+	* Correct file name extension in tools/zipme.sh
+	* Fix error in dependencies in 8051/2 Makefile
+	* sched/Makefile: Don't build sleep() or usleep() if signals are disabled
+	* sched/sched_setparam.c: Remove redundant disabling of interrupts
+	* sched/usleep.c: Fixed nsec calculation
+	* lib/lib_strcspn.c: Function incorrectly named strspn().
+	* examples/ostest/main.c:  Errors in SDCC version of a memcpy() call
+	* examples/ostest/sighand.c: Don't call fflush() if streams are disabled
+	* include/limits.h, include/time.h, sched/clock_internal.h: A support for
+	  using selectable system timer frequency.
+	* Fixed error in mountpoint related conditional compilation introduced
+	  in 0.2.5
+	* Restructured some Makefiles to better handle enabling and disabling
+	  NuttX features without having so much conditional compilation in the
+	  source files.
+	* tools/mkconfig.c: No longer depends on asprintf() and _GNU_SOURCE and
+	  so should now build in non-GNU, non-GLIBC environments.
+	* include/nuttx/compiler.h: Fix for using SDCC with the Z80.
+	* include/assert.h & arch/pjrc-8051/src/up_assert.c: SDCC does support
+	  __FILE__and __LINE__ (not tested)
+	* examples/ostest/barrier.c: Don't call usleep() when signals are
+	  disabled.
+
+0.2.8 2007-07-02 Gregory Nutt <spudmonkey@racsa.co.cr>
+	* tools/Makefile.mkconfig: Under Cygwin, executable has a different name
+	* tools/mkdeps.sh & arch/arm/src/Makefile: Corrected a problem makeing dependencies
+	* tools/zipme.sh: Force directory name to be nuttx-xx.yy.zz
+	* fs/fs_opendir.c: Correct errors in semaphore usage that can cause deadlock.
+	* lib/lib_getopt.c: Added getopt() support
+	* examples/nsh/:  NSH now supports cat, mount, umount, and mkdir.  ls supports
+	  -l -s, and -R
+	* Added basic OS support to manage environment variables:  environment
+	  storage, cloning on task creation, sharing on pthread creation, destruction
+	  on thread/task exit.
+	* Add environment variables APIs:  environ, getenv, putenv, clearenv, setenv,
+	  unsetenv
+	* Correct an error in realloc() when the block is extended "down" in memory.
+	  In this case, the old memory contents need to be copied to the new location
+	  and an allocated bit was not being set.
+	* examples/ostest/: Added an environment variable test.
+	* examples/nsh/: Break into several files.
+	* lib/: Added strrchr, basename, dirname
+	* examples/nsh/: Add cp, rm, rmdir, set, unset commands. echo will now print
+	  environment variables.
+
+0.3.0 2007-11-06 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Imported uIP into the tree (see
+	   http://www.sics.se/~adam/uip/index.php/Main_Page)
+	* Adding socket(), bind(), connect()
+	* Added snprintf()
+	* Added send() and sendto(); integrate write() and close() with socket descriptors.
+        * Added recv() and recvfrom().
+	* Added getsockopt() and setsockopt()
+	* Documentation updated to address socket interfaces.
+	* Implemented receive timeouts via setsockopt(SO_RCVTIMEO).
+	* Provide support for multiple network devices
+	* Implement socket ioctl() calls to set addresses
+	* Added listen() and accept()
+	* Added DM90x0 ethernet driver
+	* ARP timer is now built into the network layer
+	* Basic client functionality verified: TCP socket(), bind(), connect(), recv(), send().
+
+0.3.1 2007-11-19 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Separated net/uip/uip.c into several functions in several files.
+	* Corrected a TCP problem where packets were dropped because there was no
+	  recv() in place but the packet was being ACKed.  There are still TCP
+	  recv buffering issues, but this is part of a larger buffering issue.
+	* Basic server functionality verified: TCP listen(), accept()
+	* Fix DM90x0 driver problem that caused TX overruns
+	* Add strncmp()
+	* Added TCP/IP read-ahead buffer to minimize failed ACKs and packet loss.
+
+0.3.2 2007-11-23 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Add strcat() and strncat()
+	* Integrated uIP micro webserver
+	* Corrected a serious bug in TCP queue management
+	* Fix leak in socket close logic
+	* Add TX notification to driver so that it can respond faster to
+	  the availability of TX data.
+	* Moved urgent data info into device structure.
+	* TCP and ICMP protocols can now be disabled.
+	* Added UDP test in examples/udp
+	* Verified/debugged UDP socket(), bind(), sendto() and recvfrom() logic
+	  using examples/udp
+	* recvfrom() and accept() now correctly return the remote address.
+	* Fixed computation error in ntohl().
+
+0.3.3 2007-11-28 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Removed unused uIP files
+	* sched/, mm/, and net/ subystem debug can not be selectively enabled/disabled
+	* Correct socket close logic -- needs to disconnect TCP socket on close
+	* uIP webserver now seems to be fully functional
+	* fs/ and lib/ subystem debug can not be selectively enabled/disabled
+	* Added vsnprintf
+	* Integrated uIP telnetd
+	* Add missing logic to readahead buffer logic
+	* examples/nettest uses larger buffers
+	* Improved ACK handling in send() to better hander deferred acknowledgements
+	  and polling intervals.  Greatly improves send performance.
+
+0.3.4 2007-12-10 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Added and partially verified DHCP server logic (netutils/dhcpd)
+	* Fix BROADCAST=y compilation problems
+	* Fix UDP recvfrom timeout bug
+	* Correct processing of input UDP broadcast packets.
+	* Verfied basic DHCP client functionality (netutils/dhcpc)
+	* Implemented send() timeout logic
+	* Added and verifed a TELNETD front end to NSH (examples/nsh)
+	* Add a skeleton Ethernet device driver (drivers/net/skeleton.c)
+	* Added C5471 Ethernet device driver (arch/arm/src/c5471/c5471_ethernet.c)
+	* Found and fixed several problems in uIP when compiled for ARM with optimization.
+
+0.3.5 2007-12-18 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Added inet_ntoa() and ether_ntoa()
+	* Added netdev_foreach() to support traversal of registered network devices
+	* Added support for 'ifconfig' command to NSH (examples/nsh)
+	* Moved MAC and ethernet definitions to net/ethernet.h
+	* Fix sim and DM90x0 compilation errors introduced in 0.3.4
+	* Fixed errors in C5471 configuration files for examples/uip
+	* Modified DHCPC (netutils/dhcpc) so that it should work in environments where
+	  there are more than one DHCPD server.
+	* NSH ifconfig command now shows uIP status was well (examples/nsh)
+
+0.3.6 2008-01-06 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Changes for use with SDCC compiler
+	* Added a simulated z80 target
+	* Fix deadlock errors when using stdio but with no buffering
+	* Add support for Pascal P-Code interpreter
+
+0.3.6.1 2008-01-07 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* The initial 0.3.6 release including an error that prevented
+	  building successfully if the Pascal add-on was
+	  was not present.
+
+0.3.7 2008-01-31 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Added support for the Zilog Z16F using the Zilog Z16F2800100ZCOG
+	  Development Kit.
+	* Add support toolchains that do not support making of dependencies
+	* Fix Cygwin build with spaces in directory names
+	* Name make system changes to deal with non-GNU toolchains (i.e., Zilog)
+	* Add support for Windows native toolchains that cannot follow Cygwin soft links
+	* Modified serial driver interface to handle hardware with non-16550A-like
+	  interrupt architecture (like the Z16F)
+	* Added a "dumb" serial console driver to simplify OS bringup
+	* Corrected a bug that caused the errno value of one task to be clobbered
+	  when a different task exits.  Effects all architectures.
+
+0.3.8 2008-02-10 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Added a test case to verify the Pascal P-Code interpreter
+	* Added /dev/zero
+	* 'errno' is now defined to be *get_errno_ptr() with no name conflicts
+	* Added lseek() and fseek()
+	* Integrated Pascal interpreter test case on the simulation platform.  Needs
+          pascal-0.1.1.
+	* Add Pascal test case on the z16f platform.  Needs pascal-0.1.2 (does not
+          yet work due to some tool issues).
+	* C buffered I/O fixes:
+	  - Fix fflush() return value,
+	  - Add correct fflush behavior when the FILE argument is null.
+	  - Add logic to a correctly handle read/write access on the same FILE
+	  - fseek() flushes read/write data when before moving the file pointer
+	  - When read data is flushed, reposition the file pointer to account for
+	    buffered, but unread data
+	* Pascal P-Code files are now standardized to big-endian for portability
+	* Fix a build problem with z80 and SDCC 2.7.0 (format of a map file changed)
+	  (see bug 1887170)
+	* Pascal P-Code runtime now compiles with the SDCC toolchain.
+	* Added a generic CAN driver.  This driver is untested as of this writing.
+	* Corrected DM320 UART configuration problem
+
+0.3.9 2008-03-09 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Began adding support for the ZiLOG Z8Encore! microcontroller for the Z8Encore000ZCO
+	  development board and the Z8F6403 part.
+	* Fix broken 'clean' target on z80sim configurations
+	* Re-structure arch/z80 to provide support for all ZiLOG 8-bit microcontrollers (ez8
+	  in particular for now).
+	* Add support for TRS80-Model 3 based on the xtrs emulation (http://www.tim-mann.org/xtrs.html)
+	  Per patch from Jacques Pelletier.
+	* In all shell scripts, change #!/bin/sh to #!/bin/bash to resolve problems in
+	  Ubuntu where /bin/sh is a link to dash.
+	* Z8Encore! port verified on ZDS-II instruction set/chip simulator.
+
+0.3.10 2008-05-15 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Add support for the ZiLOG EZ80Acclaim microcontrooler (EZ80F91 chip).
+	* Add configuration for the ZiLOG z8f64200100kit development kit, Z8F6423 part.
+	* Add configuration for the ZiLOG ez80f0910200kitg development kit, EZ80F091 part.
+	* Correct critical list handling errors in task shutdown logic: One in timer
+	  deletion logic (timer_delete.c) and one in stream logic (lib_init.c) reported
+	  by kwonsk.
+
+0.3.11 2008-06-01 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Add support for recursive mutexes.
+	* Eliminate a memory leak -- contained watchdog instance was not being
+	  deleted with a POSIX timer was deleted reported by kwonsk.
+	* Eliminate a deadlock condition in opendir() reported by kwonsk.
+	* Fix several FAT filesystem problems reported by kwonsk (Changes not yet
+	  verified).
+	* Host simulator no longer uses Linux system calls directly; Now works with Cygwin.
+	* Fix an error that occurs when a POSIX timer is deleted by the timer signal handler.
+	* Add logic to allow the examples/ostest to be run repetitively as an endurance test.
+	* Add a ramdisk block driver
+
+0.3.12 2008-08-10 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Improved solution to POSIX timer lifetime controls bug fixed in 0.3.11.
+	* Add test for recursive mutexes
+	* Correct bug in recursive mutex logic
+	* Add mkfifo()
+	* Add pipe() and test for both pipes and fifos
+	* Attempts to open a FIFO will now block until there is at least one writer
+	* Add test/Fixed errors in FIFO reader/writer interlocks
+	* Removed limitation: task_create() was only dup'ing 3 file descriptors (now
+	  dups all open file descriptors).
+	* Added a test for redirection of stdio through pipes
+	* Fixed error in dup and dup2: Must call open/close methods in fs/driver so that
+	  driver can correctly maintain open reference counts.
+	* Same issue on closing file descriptors in exit()
+	* Fixed in error in stdio flush logic.  Needed ssize_t vs size_t for error
+	  check.
+	* Moved all FAT related files from fs to fs/fat
+	* Implemented mkfatfs(), a non-standard API to create a FAT filesystem on a
+	  block device (not yet tested).
+	* Added a test for mkfatfs() on a RAM disk in examples/mount and verified
+	  basic mkfatfs functionality for FAT12.
+
+0.3.13 2008-09-01 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* NSH: Added mkfatfs, mkfifo, sleep, usleep and nice commands
+	* Fixed problem with console input in Cygwin-based simulator; NSH now works
+	  with simulator.
+	* NSH will now execute commands in background
+	* sched_get_priority_max/min returned error on SCHED_RR
+	* Removed duplicate getenv() implementation in /lib
+	* Correct detection of End-of-File in fgets
+	* NSH: Implemented sh and crude script handler
+	* Fix prototype of read() and write(). Need to use ssize_t and size_t, not
+	  int and unsigned int.
+	* NSH now supports redirection of command output
+	* NSH can now use both telnet and serial front ends together
+	* NSH: $variable can be used for any command value
+	* Fixed an error in opendir() that could cause an assertion to fail
+	  inappropriately.
+	* Correct an error in the FAT that caused files opened for writing with
+	  O_APPEND to fail.  The file was not being properly positioned to the
+	  end of the file in that case.
+	* NSH now supports last exit status $?
+	* NSH now supports if-then[-else]-fi construct
+	* NSH now supports comments beginning with '#'
+	* NSH now supports commands to inspect and modify memory
+	* NSH cat command now supports multiple files on command line
+	* Add chdir() and getcwd()
+	* Fix error in getopt() when called with argc==1
+	* Fix error in stat() when used on the root directory
+	* NSH: Add cd and pwd commands and current working directory to all NSH
+	  commands that refer to paths.
+	* Fix errors and warnings introduced into Linux sim build because of recent
+	  Cygwin-based sim changes
+	* NSH: Add mem command to display heap usage
+	* Added telnet NSH configuration for Neuros OSD.
+	* Basic integration of concurrent telnet/serial NSH functional on Neuros
+	  OSD.
+	* Fixed a critical bug that effects the way that environment variables are
+	  shared amongst pthreads.
+	* uIP port enhance to support multi-threaded, concurrent socket access.  So,
+	  for example, one thread can be reading from a socket while another is
+	  writing to the socket.
+
+0.3.14 2008-09-08 Gregory Nutt <spudmonkey@racsa.co.cr>
+	* FAT FS now uses position variable in struct file.  This simplifies operations
+	  like ftell().
+	* fseek() needs to discard bytes buffered by ungetc().
+	* Corrected ftell() return value.
+	* Added fsetpos() and fgetpos().
+	* NSH: Now supports 'test' and '[' commands
+	* Correct error in send() timeout logic.
+	* Correct error in multi-threaded socket handling in send() and sendto().
+	  Outgoing data could overwrite incoming data.
+	* Add support to uIP for application access to ICMP protocol stacks; Add
+	  ping request logic.
+	* NSH: Add ping command
+	* Correct IP checksum calculation in ICMP and UDP message send logic.
+	* NSH: Created an HTML document and a more detailed README file describing NSH.
+	* Added basic TFTP client logic (netutils/tftpc).
+	* NSH: Add get and put commands to support TFTP get and put operations.
+	* NSH: Added a mkrd command that will create a RAMDISK that can be formatted
+	  and mounted.
+	* Corrected a critical bug that prevent recvfrom from receiving packets from
+	  any remote UDP port.
+	* NSH: Add hexadecimal dump command (xd)
+	* Fixed several critical bugs with regard to fat reading and writing and FAT12
+	  accesses.  Basically the FAT FS only worked with my tiny test files and test
+	  cases.  A lot of stronger FAT tested is needed!!
+	* Fixed another FAT bug in implementation of FAT lseek; this prohibit correct
+	  random access to large files.
+
+0.3.15 2008-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>

Documentation/NuttXBanner.html

@@ -11,10 +11,29 @@
     </a>
   </td>
   <td>
-    <big><b>NuttX RTOS</b></big><br>
-    <a href="http://sourceforge.net/projects/nuttx" target="_top">Project</a><br>
-    <a href="http://nuttx.sourceforge.net" target="_top">Home</a>
+    <table width="100%">
+      <tr>
+        <td bgcolor="#e4e4e4">
+          <big><b><i><font color="#3c34ec">NuttX RTOS</font></i></b></big>
+        </td>
+      </tr>
+      <tr>
+        <td>
+          <a href="http://sourceforge.net/projects/nuttx" target="_top">Project</a><br>
+        </td>
+      </tr>
+      <tr>
+        <td>
+          <a href="http://nuttx.sourceforge.net" target="_top">Home</a>
+        </td>
+      </tr>
+    </table>
+  </td>
+  <td width="210">
+    <a href="freeports.html" target="_blank">
+      <img src="freeports.gif" width="210" height="62" border="0"/>
+    </a>
   </td>
   </tr>
 </body>
-</html>
+</html>

Documentation/freeports.html

@@ -0,0 +1,20 @@
+<html>
+<head>
+<title>Free NuttX Ports</title>
+</head>
+<body background="backgd.gif">
+<center>
+<table border="1" width="80%" bgcolor="#eeeeee">
+<tr><td>
+<big><b><i>Free</i> Ports</b></big>.
+If you have a hardware platform that you would like to see NuttX ported to then have I got a deal for you:
+I am willing to port NuttX to run on your hardware <b><i>FREE</i></b>.
+You would, of course, have to provide all hardware, development tools, and documentation.
+The functionality would be limited to basic boot-up, serial console, networking, ...
+I would need to retain the hardware throught the support cycle.
+Of course, this offer depends the availability of free time to do the port.
+If you are interested, contact <a href="http://sourceforge.net/users/patacongo/">patacongo</a> at SourceForge.
+</td></tr></table>
+</body>
+</html>
+

Documentation/index.html

@@ -2,7 +2,7 @@
 <head>
 <title>NuttX</title>
 </head>
-<frameset rows="75,*" framespacing="0" border="0" frameborder="0">
+<frameset rows="80,*" framespacing="0" border="0" frameborder="0">
   <frame name="header" scrolling="no" target="main" src="NuttXBanner.html" marginwidth="0" marginheight="0">
   <frame name="main" src="NuttX.html">
   <noframes>

Makefile

@@ -1,7 +1,7 @@
-############################################################
+############################################################################
 # Makefile
 #
-#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -14,7 +14,7 @@
 #    notice, this list of conditions and the following disclaimer in
 #    the documentation and/or other materials provided with the
 #    distribution.
-# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+# 3. Neither the name NuttX nor the names of its contributors may be
 #    used to endorse or promote products derived from this software
 #    without specific prior written permission.
 #
@@ -31,40 +31,136 @@
 # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 # POSSIBILITY OF SUCH DAMAGE.
 #
-############################################################
+############################################################################
 
-TOPDIR		= ${shell pwd}
+TOPDIR		:= ${shell pwd | sed -e 's/ /\\ /g'}
 -include ${TOPDIR}/.config
 -include ${TOPDIR}/Make.defs
 
+# Default tools
+
+ifeq ($(DIRLINK),)
+DIRLINK		= $(TOPDIR)/tools/link.sh
+DIRUNLINK	= $(TOPDIR)/tools/unlink.sh
+endif
+
+# Process architecture and board-specific directories
+
 ARCH_DIR	= arch/$(CONFIG_ARCH)
 ARCH_SRC	= $(ARCH_DIR)/src
+ARCH_INC	= $(ARCH_DIR)/include
+BOARD_DIR	= configs/$(CONFIG_ARCH_BOARD)
 
-SUBDIRS		= sched lib $(ARCH_SRC) mm fs drivers examples/$(CONFIG_EXAMPLE)
+# Add-on directories.  These may or may not be in place in the
+# NuttX source tree (they must be specifically installed)
+
+PCODE_DIR	:= ${shell if [ -r pcode/Makefile ]; then echo "pcode"; fi}
+
+# FSDIRS depend on file descriptor support; NONFSDIRS do not
+#   (except for parts of FSDIRS).  We will exclude FSDIRS
+#   from the build if file descriptor support is disabled
+
+NONFSDIRS	= sched lib $(ARCH_SRC) mm examples/$(CONFIG_EXAMPLE) $(PCODE_DIR)
+FSDIRS		= fs drivers
+
+ifeq ($(CONFIG_NET),y)
+NONFSDIRS	+= net netutils
+endif
+
+# CLEANDIRS are the directories that will clean in.  These are
+#   all directories that we know about.
+# MAKEDIRS are the directories in which we will build targets
+
+CLEANDIRS	= $(NONFSDIRS) $(FSDIRS)
+MAKEDIRS	= $(NONFSDIRS)
+
+ifeq ($(CONFIG_NFILE_DESCRIPTORS),0)
+ifneq ($(CONFIG_NSOCKET_DESCRIPTORS),0)
+MAKEDIRS	+= fs
+endif
+ifeq ($(CONFIG_NET),y)
+MAKEDIRS	+= drivers
+endif
+else
+MAKEDIRS	+= $(FSDIRS)
+endif
+
+# LINKLIBS is the list of NuttX libraries that is passed to the
+#   processor-specific Makefile to build the final target.
+#   Libraries in FSDIRS are excluded if file descriptor support
+#   is disabled.
 
 LINKLIBS	= sched/libsched$(LIBEXT) $(ARCH_SRC)/libarch$(LIBEXT) mm/libmm$(LIBEXT) \
-		  fs/libfs$(LIBEXT) drivers/libdrivers$(LIBEXT) lib/liblib$(LIBEXT) \
-		  examples/$(CONFIG_EXAMPLE)/lib$(CONFIG_EXAMPLE)$(LIBEXT)
+		  lib/liblib$(LIBEXT) examples/$(CONFIG_EXAMPLE)/lib$(CONFIG_EXAMPLE)$(LIBEXT)
 
+ifeq ($(CONFIG_NET),y)
+LINKLIBS	+= net/libnet$(LIBEXT) netutils/libnetutils$(LIBEXT) 
+endif
+
+ifeq ($(CONFIG_NFILE_DESCRIPTORS),0)
+ifneq ($(CONFIG_NSOCKET_DESCRIPTORS),0)
+LINKLIBS	+= fs/libfs$(LIBEXT)
+endif
+ifeq ($(CONFIG_NET),y)
+LINKLIBS	+= drivers/libdrivers$(LIBEXT)
+endif
+else
+LINKLIBS	+= fs/libfs$(LIBEXT) drivers/libdrivers$(LIBEXT)
+endif
+
+ifneq ($(PCODE_DIR),)
+LINKLIBS	+= pcode/libpcode$(LIBEXT)
+endif
+
+# This is the name of the final target
 BIN		= nuttx$(EXEEXT)
 
 all: $(BIN)
 .PHONY: clean context clean_context distclean
 
+# Build the mkconfig tool used to create include/nuttx/config.h
 tools/mkconfig:
-	$(MAKE) -C tools -f Makefile.mkconfig TOPDIR=$(TOPDIR)  mkconfig
+	@$(MAKE) -C tools -f Makefile.mkconfig TOPDIR="$(TOPDIR)"  mkconfig
 
-include/nuttx/config.h: $(ARCH_DIR)/defconfig tools/mkconfig
-	tools/mkconfig $(ARCH_DIR) > include/nuttx/config.h
+# Create the include/nuttx/config.h file
+include/nuttx/config.h: $(TOPDIR)/.config tools/mkconfig
+	tools/mkconfig $(TOPDIR) > include/nuttx/config.h
 
-include/arch: include/nuttx/config.h
-	ln -sf $(TOPDIR)/$(ARCH_DIR)/include include/arch
+# link the arch/<arch-name>/include dir to include/arch
+include/arch: Make.defs
+	@$(DIRLINK) $(TOPDIR)/$(ARCH_DIR)/include include/arch
 
-context: check_context include/nuttx/config.h include/arch
+# Link the configs/<board-name>/include dir to include/arch/board
+include/arch/board: include/arch Make.defs include/arch
+	@$(DIRLINK) $(TOPDIR)/$(BOARD_DIR)/include include/arch/board
+
+# Link the configs/<board-name>/src dir to arch/<arch-name>/src/board
+$(ARCH_SRC)/board: Make.defs
+	@$(DIRLINK) $(TOPDIR)/$(BOARD_DIR)/src $(ARCH_SRC)/board
+
+# Link arch/<arch-name>/include/<chip-name> to arch/<arch-name>/include/chip
+$(ARCH_SRC)/chip: Make.defs
+ifneq ($(CONFIG_ARCH_CHIP),)
+	@$(DIRLINK) $(TOPDIR)/$(ARCH_SRC)/$(CONFIG_ARCH_CHIP) $(ARCH_SRC)/chip
+endif
+
+# Link arch/<arch-name>/src/<chip-name> to arch/<arch-name>/src/chip
+include/arch/chip: include/arch Make.defs
+ifneq ($(CONFIG_ARCH_CHIP),)
+	@$(DIRLINK) $(TOPDIR)/$(ARCH_INC)/$(CONFIG_ARCH_CHIP) include/arch/chip
+endif
+
+dirlinks: include/arch include/arch/board include/arch/chip $(ARCH_SRC)/board $(ARCH_SRC)/chip
+
+context: check_context include/nuttx/config.h dirlinks
 
 clean_context:
-	rm -f include/nuttx/config.h
-	rm -f include/arch
+	@rm -f include/nuttx/config.h
+	@$(DIRUNLINK) include/arch/board
+	@$(DIRUNLINK) include/arch/chip
+	@$(DIRUNLINK) include/arch
+	@$(DIRUNLINK) $(ARCH_SRC)/board
+	@$(DIRUNLINK) $(ARCH_SRC)/chip
 
 check_context:
 	@if [ ! -e ${TOPDIR}/.config -o ! -e ${TOPDIR}/Make.defs ]; then \
@@ -74,47 +170,63 @@ check_context:
 	fi
 
 sched/libsched$(LIBEXT): context
-	$(MAKE) -C sched TOPDIR=$(TOPDIR) libsched$(LIBEXT)
+	@$(MAKE) -C sched TOPDIR="$(TOPDIR)" libsched$(LIBEXT)
 
 lib/liblib$(LIBEXT): context
-	$(MAKE) -C lib TOPDIR=$(TOPDIR) liblib$(LIBEXT)
+	@$(MAKE) -C lib TOPDIR="$(TOPDIR)" liblib$(LIBEXT)
 
 $(ARCH_SRC)/libarch$(LIBEXT): context
-	$(MAKE) -C $(ARCH_SRC) TOPDIR=$(TOPDIR) libarch$(LIBEXT)
+	@$(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" libarch$(LIBEXT)
 
 mm/libmm$(LIBEXT): context
-	$(MAKE) -C mm TOPDIR=$(TOPDIR) libmm$(LIBEXT)
+	@$(MAKE) -C mm TOPDIR="$(TOPDIR)" libmm$(LIBEXT)
+
+net/libnet$(LIBEXT): context
+	@$(MAKE) -C net TOPDIR="$(TOPDIR)" libnet$(LIBEXT)
+
+netutils/libnetutils$(LIBEXT): context
+	@$(MAKE) -C netutils TOPDIR="$(TOPDIR)" libnetutils$(LIBEXT)
 
 fs/libfs$(LIBEXT): context
-	$(MAKE) -C fs TOPDIR=$(TOPDIR) libfs$(LIBEXT)
+	@$(MAKE) -C fs TOPDIR="$(TOPDIR)" libfs$(LIBEXT)
 
 drivers/libdrivers$(LIBEXT): context
-	$(MAKE) -C drivers TOPDIR=$(TOPDIR) libdrivers$(LIBEXT)
+	@$(MAKE) -C drivers TOPDIR="$(TOPDIR)" libdrivers$(LIBEXT)
+
+pcode/libpcode$(LIBEXT): context
+	@$(MAKE) -C pcode TOPDIR="$(TOPDIR)" libpcode$(LIBEXT)
 
 examples/$(CONFIG_EXAMPLE)/lib$(CONFIG_EXAMPLE)$(LIBEXT): context
-	$(MAKE) -C examples/$(CONFIG_EXAMPLE) TOPDIR=$(TOPDIR) lib$(CONFIG_EXAMPLE)$(LIBEXT)
+	@$(MAKE) -C examples/$(CONFIG_EXAMPLE) TOPDIR="$(TOPDIR)" lib$(CONFIG_EXAMPLE)$(LIBEXT)
 
 $(BIN):	context depend $(LINKLIBS)
-	$(MAKE) -C $(ARCH_SRC) TOPDIR=$(TOPDIR) LINKLIBS="$(LINKLIBS)" $(BIN)
+	@$(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" LINKLIBS="$(LINKLIBS)" $(BIN)
 
 depend:
-	@for dir in $(SUBDIRS) ; do \
-		$(MAKE) -C $$dir TOPDIR=$(TOPDIR) depend ; \
+	@for dir in $(MAKEDIRS) ; do \
+		$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" depend ; \
 	done
 
-clean:
-	@for dir in $(SUBDIRS) ; do \
-		$(MAKE) -C $$dir TOPDIR=$(TOPDIR) clean ; \
+subdir_clean:
+	@for dir in $(CLEANDIRS) ; do \
+		if [ -e $$dir/Makefile ]; then \
+			$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" clean ; \
+		fi \
 	done
-	$(MAKE) -C tools -f Makefile.mkconfig TOPDIR=$(TOPDIR) clean
-	$(MAKE) -C mm -f Makefile.test TOPDIR=$(TOPDIR) clean
-	rm -f $(BIN) $(BIN).* mm_test *.map *~
+	@$(MAKE) -C tools -f Makefile.mkconfig TOPDIR="$(TOPDIR)" clean
+	@$(MAKE) -C mm -f Makefile.test TOPDIR="$(TOPDIR)" clean
 
-distclean: clean clean_context
-	@for dir in $(SUBDIRS) ; do \
-		$(MAKE) -C $$dir TOPDIR=$(TOPDIR) distclean ; \
+clean: subdir_clean
+	@rm -f $(BIN) $(BIN).* mm_test *.map *~
+
+subdir_distclean:
+	@for dir in $(CLEANDIRS) ; do \
+		if [ -e $$dir/Makefile ]; then \
+			$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" distclean ; \
+		fi \
 	done
-	$(MAKE) -C examples/$(CONFIG_EXAMPLE) TOPDIR=$(TOPDIR) distclean
-	rm -f Make.defs setenv.sh .config
+
+distclean: clean subdir_distclean clean_context
+	@rm -f Make.defs setenv.sh .config
 
 

arch/README.txt

@@ -11,160 +11,65 @@ Table of Contents
 Architecture-Specific Code
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-The file include/nuttx/arch.h identifies all of the APIs that must
-be provided by the architecture specific logic.  (It also includes
+The NuttX configuration consists of:
+
+o Processor architecture specific files.  These are the files contained
+  in the arch/<arch-name>/ directory discussed in this README.
+
+o Chip/SoC specific files.  Each processor processor architecture
+  is embedded in chip or System-on-a-Chip (SoC) architecture.  The
+  full chip architecture includes the processor architecture plus
+  chip-specific interrupt logic, general purpose I/O (GIO) logic, and
+  specialized, internal peripherals (such as UARTs, USB, etc.).
+
+  These chip-specific files are contained within chip-specific
+  sub-directories in the arch/<arch-name>/ directory and are selected
+  via the CONFIG_ARCH_name selection
+
+o Board specific files.  In order to be usable, the chip must be
+  contained in a board environment.  The board configuration defines
+  additional properties of the board including such things as
+  peripheral LEDs, external peripherals (such as network, USB, etc.).
+
+  These board-specific configuration files can be found in the
+  configs/<board-name>/ sub-directories.
+
+This README will address the processor architecture specific files
+that are contained in the arch/<arch-name>/ directory. The file
+include/nuttx/arch.h identifies all of the APIs that must
+be provided by this architecture specific logic.  (It also includes
 arch/<arch-name>/arch.h as described below).
 
 Directory Structure
 ^^^^^^^^^^^^^^^^^^^
 
-Thie arch directory contains architecture specific logic.  Each aructure
-provide a a subdirectory <arch-name>under arch/ with the folling characteristics:
+The arch directory contains architecture specific logic.  The complete
+board port in is defined by the architecture-specific code in this
+directory (plus the board-specific configurations in the config/
+subdirectory).  Each architecture must provide a subdirectory <arch-name>
+under arch/ with the following characteristics:
 
 
-	<arch-name>
-	|-- Make.defs
-	|-- defconfig
-	|-- setenv.sh
-	|-- include
+	<arch-name>/
+	|-- include/
+	|   |--<chip-name>/
+	|   |  `-- (chip-specific header files)
+	|   |--<other-chips>/
 	|   |-- arch.h
 	|   |-- irq.h
 	|   `-- types.h
-	`-- src
+	`-- src/
+	    |--<chip-name>/
+	    |  `-- (chip-specific source files)
+	    |--<other-chips>/
 	    |-- Makefile
 	    `-- (architecture-specific source files)
 
 Summary of Files
 ^^^^^^^^^^^^^^^^
 
-Make.defs -- This makefile fragment provides architecture and
-  tool-specific build options.  It will be included by all other
-  makefiles in the build (once it is installed).  This make fragment
-  should define:
-
-	Tools: CC, LD, AR, NM, OBJCOPY, OBJDUMP
-	Tool options: CFLAGS, LDFLAGS
-
-  When this makefile fragment runs, it will be passed TOPDIR which
-  is the path to the root directory of the build.  This makefile
-  fragment may include ${TOPDIR}/.config to perform configuration
-  specific settings.  For example, the CFLAGS will most likely be
-  different if CONFIG_DEBUG=y.
-
-defconfig -- This is a configuration file similar to the Linux
-  configuration file.  In contains varialble/value pairs like:
-
-	CONFIG_VARIABLE=value
-
-  This configuration file will be used at build time:
-
-    (1) as a makefile fragment included in other makefiles, and
-    (2) to generate include/nuttx/config.h which is included by
-        most C files in the system.
-
-  The following variables are recognized by the build (you may
-  also include architecture-specific settings).
-
-	Architecture selection:
-
-		CONFIG_ARCH - identifies the arch subdirectory
-		CONFIG_ARCH_name - for use in C code
-
-	General OS setup
-
-		CONFIG_EXAMPLE - identifies the subdirectory in examples
-		  that will be used in the build
-		CONFIG_DEBUG - enables built-in debug options
-		CONFIG_DEBUG_VERBOSE - enables verbose debug output
-		CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
-		  time console output
-		CONFIG_MM_REGIONS - If the architecture includes multiple
-		  regions of memory to allocate from, this specifies the
-		  number of memory regions that the memory manager must
-		  handle and enables the API mm_addregion(start, end);
-		CONFIG_RR_INTERVAL - The round robin timeslice will be set
-		  this number of milliseconds;  Round robin scheduling can
-		  be disabled by setting this value to zero.
-		CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
-		  scheduler to monitor system performance
-		CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
-		  task name to save in the TCB.  Useful if scheduler
-		  instrumentation is selected.  Set to zero to disable.
-		CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
-		  Used to initialize the internal time logic.
-		CONFIG_JULIAN_TIME - Enables Julian time conversions
-		CONFIG_DEV_CONSOLE - Set if architecture-specific logic
-		  provides /dev/console.  Enables stdout, stderr, stdin.
-
-	The following can be used to disable categories of APIs supported
-	by the OS.  If the compiler supports weak functions, then it
-	should not be necessary to disable functions unless you want to
-	restrict usage of those APIs.
-
-	There are certain dependency relationships in these features.
-
-	o mq_notify logic depends on signals to awaken tasks
-	  waiting for queues to become full or empty.
-	o pthread_condtimedwait() depends on signals to wake
-	  up waiting tasks.
-
-		CONFIG_DISABLE_CLOCK, CONFIG_DISABLE_PTHREAD.
-		CONFIG_DISABLE_SIGNALS, CONFIG_DISABLE_MQUEUE
-
-
-	Misc libc settings
-
-		CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
-		   little smaller if we do not support fieldwidthes
-
-	Allow for architecture optimized implementations
-
-		The architecture can provide optimized versions of the
-		following to improve sysem performance
-
-		CONFIG_ARCH_MEMCPY, CONFIG_ARCH_MEMCMP, CONFIG_ARCH_MEMMOVE
-		CONFIG_ARCH_MEMSET, CONFIG_ARCH_STRCMP, CONFIG_ARCH_STRCPY
-		CONFIG_ARCH_STRNCPY, CONFIG_ARCH_STRLEN, CONFIG_ARCH_BZERO
-		CONFIG_ARCH_KMALLOC, CONFIG_ARCH_KZMALLOC, CONFIG_ARCH_KFREE
-
-	Sizes of configurable things (0 disables)
-
-		CONFIG_MAX_TASKS - The maximum number of simultaneously
-		  active tasks.  This value must be a power of two.
-		CONFIG_NPTHREAD_KEYS - The number of items of thread-
-		  specific data that can be retained
-		CONFIG_NFILE_DESCRIPTORS - The maximum number of file
-		  descriptors (one for each open)
-		CONFIG_NFILE_STREAMS - The maximum number of streams that
-		  can be fopen'ed
-		CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
-		  on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
-		CONFIG_NUNGET_CHARS - Number of characters that can be
-		  buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
-		CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
-		  structures.  The system manages a pool of preallocated
-		  message structures to minimize dynamic allocations
-		CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
-		  a fixed payload size given by this settin (does not include
-		  other message structure overhead.
-		CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
-		  structures.  The system manages a pool of preallocated
-		  watchdog structures to minimize dynamic allocations
-
-	Stack and heap information
-
-		CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
-		  operation from FLASH.
-		CONFIG_STACK_POINTER - The initial stack pointer
-		CONFIG_PROC_STACK_SIZE - The size of the initial stack
-		CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
-		CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
-		CONFIG_HEAP_BASE - The beginning of the heap
-		CONFIG_HEAP_SIZE - The size of the heap
-
-setenv.sh -- This is a script that you can include that will be installed at
-  the toplevel of the directory structure and can be sourced to set any
-  necessary environment variables.
+include/<chip-name>/
+  This sub-directory contains chip-specific header files.
 
 include/arch.h
   This is a hook for any architecture specific definitions that may
@@ -205,6 +110,9 @@ include/irq.h
   This file must also define NR_IRQS, the total number of IRQs supported
   by the board.
 
+src/<chip-name>/
+  This sub-directory contains chip-specific source files.
+
 src/Makefile
   This makefile will be executed to build the targets src/libup.a and
   src/up_head.o.  The up_head.o file holds the entry point into the system
@@ -215,36 +123,81 @@ src/Makefile
 Supported Architectures
 ^^^^^^^^^^^^^^^^^^^^^^^
 
+arch/sim - Linux simulation
+    A user-mode port of NuttX to the x86 Linux platform is available.
+    The purpose of this port is primarily to support OS feature development.
+    This port does not support interrupts or a real timer (and hence no
+    round robin scheduler)  Otherwise, it is complete.
+
+arch/arm - ARM-based micro-controllers
+    This directory holds common ARM architectures.  At present, this includes
+    the following subdirectories:
+
+    arch/arm/include and arch/arm/common
+        Common ARM logic.
+
+    arch/arm/include/c5471 and arch/arm/src/c5471
+        TI TMS320C5471 (also called TMS320DM180 or just C5471).
+        NuttX operates on the ARM7 of this dual core processor. This port
+        complete, verified, and included in the NuttX release 0.1.1.
+
+    arch/arm/include/dm320 and arch/arm/src/dm320
+        TI TMS320DM320 (also called just DM320).
+        NuttX operates on the ARM9EJS of this dual core processor.  This port
+        complete, verified, and included in the NuttX release 0.2.1.
+
+    arch/arm/include/lpc214x and arch/arm/src/lpc214x
+        These directories provide support for NXP LPC214x family of
+        processors.
+        STATUS: This port is in progress and should be available in the
+        nuttx-0.2.5 release.
+
+arch/m68322
+    A work in progress.
+    STATUS:  Stalled for the moment.
+
+arch/pjrc-8051 - 8051/52 microcontrollers
+    8051 Microcontroller.  This port is not quite ready for prime time.
+
+arch/z16 - ZiLOG 16-bit processors
+    This directory holds related, 16-bit architectures from ZiLOG.  At
+    present, this includes the following subdirectories:
+
+    arch/z16/include and arch/z16/common
+        Common microcontroller logic.
+
+    arch/z16/include/z16f and arch/z16/src/z16f
+        ZiLOG z16f Microcontroller.
+        STATUS: Released in nuttx-0.3.7.  Fully functional other than issues
+        addressed in ${TOPDIR}/TODO.
+
+arch/z80 - ZiLOG 8-bit microcontrollers
+    This directory holds related, 8-bit architectures from ZiLOG.  At
+    present, this includes the following subdirectories:
+
+    arch/z80/include and arch/z80/common
+        Common microcontroller logic.
+
+    arch/z80/include/z80 and arch/z80/src/z80
+        Classic ZiLOG z80 Microcontroller.
+        STATUS: Functional with no known defects.  There are still several
+         OS features that have not yet been tested (e.g., networking).
+
+    arch/z80/include/z8 and arch/z80/src/z8
+        ZiLOG Z8Encore! Microcontroller
+        This is a work in progress.
+
+The following architecture directories are deprecated.  They have been
+replaced by the logic in arm/arm and will deleted at some point in the
+future.
+
 arch/c5471
-    TI TMS320C5471 (also called TMS320DM180).
-    NuttX operates on the ARM7 of this dual core processor. This port
-    uses the Spectrum Digital evaluation board with a GNU arm-elf toolchain*.
-    This port is in progress and partially functional (However, my board
-    is dead at the moment so it will be awhile before I fix it).
+    Replaced with arch/arm/include/c5471 and arch/arm/src/c5471
 
-arch/pjrc-8051
-    8051 Microcontroller.  This port uses the PJRC 87C52 development system
-    and the SDCC toolchain.   This port is not quite ready for prime time.
-
-arch/sim
-  x86 Linux Simulation</b>.  Fully functional.
+arch/dm320
+    Replaced with arch/arm/include/dm320 and arch/arm/src/dm320
 
 Other ports for the for the TI TMS320DM270 and for MIPS are in various states
 of progress
 
-Configuring NuttX
-^^^^^^^^^^^^^^^^^
-
-Configuring NuttX requires only copying
-
-  arch/<arch-name>/Make.def to ${TOPDIR}/Make.defs
-  arch/<arch-name>/setenv.sh to ${TOPDIR}/setenv.sh
-  arch/<arch-name>/defconfig to ${TOPDIR}/.config
-
-There is a script that automates these steps.  The following steps will
-accomplish the same configuration:
-
-  cd tools
-  ./configure.sh <arch-name>
-
 

arch/arm/include/arch.h

@@ -0,0 +1,79 @@
+/************************************************************
+ * arch/arch.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/arch.h
+ */
+
+#ifndef __ARCH_ARCH_H
+#define __ARCH_ARCH_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ARCH_ARCH_H */

arch/arm/include/c5471/irq.h

@@ -0,0 +1,105 @@
+/************************************************************
+ * arch/c5471/irq.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_C5471_IRQ_H
+#define __ARCH_C5471_IRQ_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* C5471 Interrupts */
+
+#define C5471_IRQ_TIMER0         0
+#define C5471_IRQ_TIMER1         1
+#define C5471_IRQ_TIMER2         2
+#define C5471_IRQ_GPIO0          3
+#define C5471_IRQ_ETHER          4
+#define C5471_IRQ_KBGPIO_0_7     5
+#define C5471_IRQ_UART           6
+#define C5471_IRQ_UART_IRDA      7
+#define C5471_IRQ_KBGPIO_8_15    8
+#define C5471_IRQ_GPIO3          9
+#define C5471_IRQ_GPIO2         10
+#define C5471_IRQ_I2C           11
+#define C5471_IRQ_GPIO1         12
+#define C5471_IRQ_SPI           13
+#define C5471_IRQ_GPIO_4_19     14
+#define C5471_IRQ_API           15
+
+#define C5471_IRQ_WATCHDOG      C5471_IRQ_TIMER0
+#define C5471_IRQ_SYSTIMER      C5471_IRQ_TIMER2
+#define NR_IRQS                 (C5471_IRQ_API+1)
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_C5471_IRQ_H */
+

arch/arm/include/dm320/irq.h

@@ -0,0 +1,134 @@
+/************************************************************
+ * arch/dm320/irq.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_DM320_IRQ_H
+#define __ARCH_DM320_IRQ_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* DM320 Interrupts */
+
+#define DM320_IRQ_TMR0      0 /* IRQ0:  Timer 0 Interrupt */
+#define DM320_IRQ_TMR1      1 /* IRQ1:  Timer 1 Interrupt */
+#define DM320_IRQ_TMR2      2 /* IRQ2:  Timer 2 Interrupt (CCD timer 0) */
+#define DM320_IRQ_TMR3      3 /* IRQ3:  Timer 3 Interrupt (CCD timer 1) */
+#define DM320_IRQ_CCDVD0    4 /* IRQ4:  CCD VD Interrupt #0 */
+#define DM320_IRQ_CCDVD1    5 /* IRQ5:  CCD VD Interrupt #1 */
+#define DM320_IRQ_CCDWEN    6 /* IRQ6:  CCD WEN Interrupt */
+#define DM320_IRQ_VENC      7 /* IRQ7:  Video Encoder Interrupt */
+#define DM320_IRQ_SP0       8 /* IRQ8:  Serial Port 0 Interrupt (with DMA) */
+#define DM320_IRQ_SP1       9 /* IRQ9:  Serial Port 1 Interrupt */
+#define DM320_IRQ_EXTHOST  10 /* IRQ10: External host interrupt */
+#define DM320_IRQ_IMGBUF   11 /* IRQ11: Image Buffer */
+#define DM320_IRQ_UART0    12 /* IRQ12: UART0 Interrupt */
+#define DM320_IRQ_UART1    13 /* IRQ13: UART1 Interrupt */
+#define DM320_IRQ_USB0     14 /* IRQ14: USB 0 Interrupt (DMA) */
+#define DM320_IRQ_USB1     15 /* IRQ15: USB 1 Interrupt (Core) */
+#define DM320_IRQ_VLYNQ    16 /* IRQ16: VLYNQ Interrupt */
+#define DM320_IRQ_MTC0     17 /* IRQ17: Memory Traffic Controller 0 (DMA) */
+#define DM320_IRQ_MTC1     18 /* IRQ18: Memory Traffic Controller 1 (CFC_RDY) */
+#define DM320_IRQ_MMCSD0   19 /* IRQ19: MMC/SD or MS 0 Interrupt */
+#define DM320_IRQ_MMCSD1   20 /* IRQ20: MMC/SD or MS 1 Interrupt */
+#define DM320_IRQ_EXT0     21 /* IRQ21: External Interrupt #0 (GIO0) */
+#define DM320_IRQ_EXT1     22 /* IRQ22: External Interrupt #1 (GIO1) */
+#define DM320_IRQ_EXT2     23 /* IRQ23: External Interrupt #2 (GIO2) */
+#define DM320_IRQ_EXT3     24 /* IRQ24: External Interrupt #3 (GIO3) */
+#define DM320_IRQ_EXT4     25 /* IRQ25: External Interrupt #4 (GIO4) */
+#define DM320_IRQ_EXT5     26 /* IRQ26: External Interrupt #5 (GIO5) */
+#define DM320_IRQ_EXT6     27 /* IRQ27: External Interrupt #6 (GIO6) */
+#define DM320_IRQ_EXT7     28 /* IRQ28: External Interrupt #7 (GIO7) */
+#define DM320_IRQ_EXT8     29 /* IRQ29: External Interrupt #8 (GIO8) */
+#define DM320_IRQ_EXT9     30 /* IRQ30: External Interrupt #9 (GIO9) */
+#define DM320_IRQ_EXT10    31 /* IRQ31: External Interrupt #10 (GIO10) */
+#define DM320_IRQ_EXT11    32 /* IRQ32: External Interrupt #11 (GIO11) */
+#define DM320_IRQ_EXT12    33 /* IRQ33: External Interrupt #12 (GIO12) */
+#define DM320_IRQ_EXT13    34 /* IRQ34: External Interrupt #13 (GIO13) */
+#define DM320_IRQ_EXT14    35 /* IRQ35: External Interrupt #14 (GIO14) */
+#define DM320_IRQ_EXT15    36 /* IRQ36: External Interrupt #15 (GIO15) */
+#define DM320_IRQ_PREV0    37 /* IRQ37: Preview Engine 0 (Preview Over) */
+#define DM320_IRQ_PREV1    38 /* IRQ38: Preview Engine 1 (Preview Historgram Over) */
+#define DM320_IRQ_WDT      39 /* IRQ39: Watchdog Timer Interrupt */
+#define DM320_IRQ_I2C      40 /* IRQ40: I2C Interrupt */
+#define DM320_IRQ_CLKC     41 /* IRQ41: Clock controller Interrupt (wake up) */
+#define DM320_IRQ_E2ICE    42 /* IRQ42: Embedded ICE Interrupt */
+#define DM320_IRQ_ARMCOMRX 43 /* IRQ43: ARMCOMM Receive Interrupt */
+#define DM320_IRQ_ARMCOMTX 44 /* IRQ44: ARMCOMM Transmit Interrupt */
+#define DM320_IRQ_RSV      45 /* IRQ45: Reserved Interrupt */
+
+#define DM320_IRQ_SYSTIMER DM320_IRQ_TMR0
+#define NR_IRQS            (DM320_IRQ_RSV+1)
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_DM320_IRQ_H */
+

arch/arm/include/irq.h

@@ -0,0 +1,229 @@
+/************************************************************
+ * arch/irq.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_IRQ_H
+#define __ARCH_IRQ_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/irq.h>
+#include <arch/chip/irq.h>
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* IRQ Stack Frame Format:
+ *
+ * Context is always saved/restored in the same way:
+ *
+ *   (1) stmia rx, {r0-r14}
+ *   (2) then the PC and CPSR
+ *
+ * This results in the following set of indices that
+ * can be used to access individual registers in the
+ * xcp.regs array:
+ */
+
+#define REG_R0              (0)
+#define REG_R1              (1)
+#define REG_R2              (2)
+#define REG_R3              (3)
+#define REG_R4              (4)
+#define REG_R5              (5)
+#define REG_R6              (6)
+#define REG_R7              (7)
+#define REG_R8              (8)
+#define REG_R9              (9)
+#define REG_R10             (10)
+#define REG_R11             (11)
+#define REG_R12             (12)
+#define REG_R13             (13)
+#define REG_R14             (14)
+#define REG_R15             (15)
+#define REG_CPSR            (16)
+
+#define XCPTCONTEXT_REGS    (17)
+#define XCPTCONTEXT_SIZE    (4 * XCPTCONTEXT_REGS)
+
+#define REG_A1              REG_R0
+#define REG_A2              REG_R1
+#define REG_A3              REG_R2
+#define REG_A4              REG_R3
+#define REG_V1              REG_R4
+#define REG_V2              REG_R5
+#define REG_V3              REG_R6
+#define REG_V4              REG_R7
+#define REG_V5              REG_R8
+#define REG_V6              REG_R9
+#define REG_V7              REG_R10
+#define REG_SB              REG_R9
+#define REG_SL              REG_R10
+#define REG_FP              REG_R11
+#define REG_IP              REG_R12
+#define REG_SP              REG_R13
+#define REG_LR              REG_R14
+#define REG_PC              REG_R15
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/* This struct defines the way the registers are stored.  We
+ * need to save:
+ *
+ *  1	CPSR
+ *  7	Static registers, v1-v7 (aka r4-r10)
+ *  1	Frame pointer, fp (aka r11)
+ *  1	Stack pointer, sp (aka r13)
+ *  1	Return address, lr (aka r14)
+ * ---
+ * 11	(XCPTCONTEXT_USER_REG)
+ *
+ * On interrupts, we also need to save:
+ *  4	Volatile registers, a1-a4 (aka r0-r3)
+ *  1	Scratch Register, ip (aka r12)
+ *---
+ *  5	(XCPTCONTEXT_IRQ_REGS)
+ *
+ * For a total of 17 (XCPTCONTEXT_REGS)
+ */
+
+#ifndef __ASSEMBLY__
+struct xcptcontext
+{
+  /* The following function pointer is non-zero if there
+   * are pending signals to be processed.
+   */
+
+#ifndef CONFIG_DISABLE_SIGNALS
+  void *sigdeliver; /* Actual type is sig_deliver_t */
+#endif
+
+  /* These are saved copies of LR and CPSR used during
+   * signal processing.
+   */
+
+  uint32 saved_pc;
+  uint32 saved_cpsr;
+
+  /* Register save area */
+
+  uint32 regs[XCPTCONTEXT_REGS];
+};
+#endif
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* Save the current interrupt enable state & disable IRQs */
+
+static inline irqstate_t irqsave(void)
+{
+  unsigned int flags;
+  unsigned int temp;
+  __asm__ __volatile__
+    (
+     "\tmrs    %0, cpsr\n"
+     "\torr    %1, %0, #128\n"
+     "\tmsr    cpsr_c, %1"
+     : "=r" (flags), "=r" (temp)
+     :
+     : "memory");
+  return flags;
+}
+
+/* Restore saved IRQ & FIQ state */
+
+static inline void irqrestore(irqstate_t flags)
+{
+  __asm__ __volatile__
+    (
+     "msr    cpsr_c, %0"
+     :
+     : "r" (flags)
+     : "memory");
+}
+
+static inline void system_call(swint_t func, int parm1,
+			       int parm2, int parm3)
+{
+  __asm__ __volatile__
+    (
+     "mov\tr0,%0\n\t"
+     "mov\tr1,%1\n\t"
+     "mov\tr2,%2\n\t"
+     "mov\tr3,%3\n\t"
+     "swi\t0x900001\n\t"
+     :
+     : "r" ((long)(func)),  "r" ((long)(parm1)),
+       "r" ((long)(parm2)), "r" ((long)(parm3))
+     : "r0", "r1", "r2", "r3", "lr");
+}
+#endif
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_IRQ_H */
+

arch/arm/include/limits.h

@@ -0,0 +1,75 @@
+/************************************************************
+ * limits.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __ARCH_LIMITS_H
+#define __ARCH_LIMITS_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+#define CHAR_BIT        8
+#define SCHAR_MIN	0x80
+#define SCHAR_MAX	0x7f
+#define UCHAR_MAX	0xff
+
+/* These could be different on machines where char is unsigned */
+
+#define CHAR_MIN	SCHAR_MIN
+#define CHAR_MAX	SCHAR_MAX
+
+#define SHRT_MIN	0x8000
+#define SHRT_MAX	0x7fff
+#define USHRT_MAX	0xffff
+
+#define INT_MIN         0x80000000
+#define INT_MAX         0x7fffffff
+#define UINT_MAX	0xffffffff
+
+/* These change on 32-bit and 64-bit platforms */
+
+#define LONG_MAX	0x80000000
+#define LONG_MIN	0x7fffffff
+#define ULONG_MAX	0xffffffff
+
+#define LLONG_MAX	0x8000000000000000
+#define LLONG_MIN	0x7fffffffffffffff
+#define ULLONG_MAX	0xffffffffffffffff
+
+#endif /* __ARCH_LIMITS_H */

arch/arm/include/lpc214x/irq.h

@@ -0,0 +1,126 @@
+/****************************************************************************
+ * arch/lpc214x/irq.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_LPC214X_IRQ_H
+#define __ARCH_LPC214X_IRQ_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* LPC214X Interrupts */
+
+#define LPC214X_WDT_IRQ        0 /* Watchdog */
+#define LPC214X_RESERVED_IRQ   1 /* SWI only */
+#define LPC214X_DBGCOMMRX_IRQ  2 /* Embedded debug */
+#define LPC214X_DBGCOMMTX_IRQ  3 /* Embedded debug */
+#define LPC214X_TIMER0_IRQ     4 /* Timer 0 */
+#define LPC214X_TIMER1_IRQ     5 /* Timer 1 */
+#define LPC214X_UART0_IRQ      6 /* UART 0 */
+#define LPC214X_UART1_IRQ      7 /* UART 1 */
+#define LPC214X_PWM0_IRQ       8 /* PWM 0 */
+#define LPC214X_I2C0_IRQ       9 /* I2C 0 */
+#define LPC214X_SPI0_IRQ      10 /* SPI 0 */
+#define LPC214X_SPI1_IRQ      11 /* SPI 1 */
+#define LPC214X_PLL_IRQ       12 /* PLL Lock IRQ */
+#define LPC214X_RTC_IRQ       13 /* Real Time Clock */
+#define LPC214X_EINT0_IRQ     14 /* External interrupt 0 */
+#define LPC214X_EINT1_IRQ     15 /* External interrupt 1 */
+#define LPC214X_EINT2_IRQ     16 /* External interrupt 2 */
+#define LPC214X_EINT3_IRQ     17 /* External interrupt 3 */
+#define LPC214X_ADC0_IRQ      18 /* ADC 0 */
+#define LPC214X_I2C1_IRQ      19 /* I2C 1 */
+#define LPC214X_BOD_IRQ       20 /* Brown Out Detect */
+#define LPC214X_ADC1_IRQ      21 /* ADC 1 */
+#define LPC214X_USB_IRQ       22 /* USB */
+
+#define LPC214X_IRQ_SYSTIMER  LPC214X_TIMER0_IRQ
+#define NR_IRQS               23
+
+/* There are 16 vectored interrupts.  If vectored interrupts are enabled, the
+ * following will be used by the system.
+ */
+
+#define LPC214X_SYSTEMER_VEC  0 /* System timer */
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+typedef void (*vic_vector_t)(uint32 *regs);
+#endif
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#ifndef CONFIG_VECTORED_INTERRUPTS
+EXTERN void up_attach_vector(int irq, int vector, vic_vector_t handler);
+EXTERN void up_detach_vector(int vector);
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_LPC214X_IRQ_H */
+

arch/arm/include/serial.h

@@ -0,0 +1,61 @@
+/************************************************************
+ * arch/serial.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __ARCH_SERIAL_H
+#define __ARCH_SERIAL_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* IOCTL commands supported by the ARM serial driver */
+
+#define TIOCSBRK        0x5401  /* BSD compatibility */
+#define TIOCCBRK        0x5402  /* " " "           " */
+#define TIOCSERGSTRUCT  0x5403  /* Get up_dev_t for port */
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+/************************************************************
+ * Public Functions
+ ************************************************************/
+
+#endif /* __ARCH_SERIAL_H */

arch/arm/include/types.h

@@ -0,0 +1,82 @@
+/************************************************************
+ * arch/types.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through sys/types.h
+ */
+
+#ifndef __ARCH_TYPES_H
+#define __ARCH_TYPES_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Type Declarations
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* These are the sizes of the standard GNU types */
+
+typedef char sbyte;
+typedef unsigned char ubyte;
+typedef unsigned char uint8;
+typedef unsigned char boolean;
+typedef short sint16;
+typedef unsigned short uint16;
+typedef int sint32;
+typedef unsigned int uint32;
+typedef long long sint64;
+typedef unsigned long long uint64;
+
+/* This is the size of the interrupt state save returned by
+ * irqsave()
+ */
+
+typedef unsigned int irqstate_t;
+
+#endif /* __ASSEMBLY__ */
+
+/************************************************************
+ * Global Function Prototypes
+ ************************************************************/
+
+#endif /* __ARCH_TYPES_H */

arch/arm/include/watchdog.h

@@ -0,0 +1,63 @@
+/************************************************************
+ * watchdog.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __ARCH_WATCHDOG_H
+#define __ARCH_WATCHDOG_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* IOCTL commands supported by the C5471 watchdog driver */
+
+#define WDIOC_KEEPALIVE 0x5701  /* Restart the watchdog timer */
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Functions
+ ************************************************************/
+
+#endif /* __ARCH_WATCHDOG_H */

arch/arm/src/Makefile

@@ -0,0 +1,123 @@
+############################################################################
+# arch/arm/src/Makefile
+#
+#   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+-include chip/Make.defs
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+CFLAGS		+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(TOPDIR)/sched
+
+HEAD_AOBJ	= $(HEAD_ASRC:.S=$(OBJEXT))
+
+ASRCS		= $(CHIP_ASRCS) $(CMN_ASRCS)
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= $(CHIP_CSRCS) $(CMN_CSRCS)
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+LDFLAGS		= $(ARCHSCRIPT)
+EXTRA_LIBS	=
+
+LINKLIBS	=
+LDPATHES	= $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
+LDLIBS		= $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
+
+BOARDDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
+
+LIBGCC		= ${shell $(CC) -print-libgcc-file-name}
+
+VPATH		= chip:common
+
+all: $(HEAD_OBJ) libarch$(LIBEXT)
+
+$(AOBJS) $(HEAD_AOBJ): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libarch$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+board/libboard$(LIBEXT):
+	$(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT)
+
+nuttx: $(HEAD_AOBJ) board/libboard$(LIBEXT)
+	@echo "LD: nuttx"
+	@$(LD) --entry=__start $(LDFLAGS) $(LDPATHES) -L$(BOARDDIR) -o $(TOPDIR)/$@ $(HEAD_AOBJ) \
+		--start-group $(LDLIBS) -lboard --end-group $(EXTRA_LIBS) $(LIBGCC) 
+	@$(NM) $(TOPDIR)/$@ | \
+	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+	sort > $(TOPDIR)/System.map
+	@export vflashstart=`$(OBJDUMP) --all-headers $(TOPDIR)/$@ | grep _vflashstart | cut -d' ' -f1`;  \
+	if [ ! -z "$$vflashstart" ]; then \
+		$(OBJCOPY) --adjust-section-vma=.vector=0x$$vflashstart $(TOPDIR)/$@ $(TOPDIR)/$@.flashimage; \
+		mv $(TOPDIR)/$@.flashimage $(TOPDIR)/$@; \
+	fi
+ifeq ($(CONFIG_RRLOAD_BINARY),y)
+	@$(TOPDIR)/tools/mkimage.sh --Prefix $(CROSSDEV) $(TOPDIR)/$@ $(TOPDIR)/$@.rr
+	@if [ -w /tftpboot ] ; then \
+		cp -f $(TOPDIR)/$@.rr /tftpboot/$@.rr.${CONFIG_ARCH}; \
+	fi
+endif
+
+.depend: Makefile chip/Make.defs $(SRCS)
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
+	fi
+	@$(MKDEP) --dep-path chip --dep-path common $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
+	fi
+	@rm -f libarch$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
+	fi
+	@rm -f Make.dep .depend
+
+-include Make.dep

arch/arm/src/c5471/Make.defs

@@ -0,0 +1,49 @@
+############################################################################
+# c5471/Make.defs
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+HEAD_ASRC	= up_nommuhead.S
+
+CMN_ASRCS	= up_saveusercontext.S up_fullcontextrestore.S
+CMN_CSRCS	= up_allocateheap.c up_assert.c up_blocktask.c up_copystate.c \
+		  up_createstack.c up_dataabort.c up_mdelay.c up_udelay.c up_doirq.c \
+		  up_exit.c up_idle.c up_initialize.c up_initialstate.c \
+		  up_interruptcontext.c up_prefetchabort.c up_releasepending.c \
+		  up_releasestack.c up_reprioritizertr.c up_schedulesigaction.c \
+		  up_sigdeliver.c up_syscall.c up_unblocktask.c \
+		  up_undefinedinsn.c up_usestack.c
+
+CHIP_ASRCS	= c5471_lowputc.S c5471_vectors.S
+CHIP_CSRCS	= c5471_irq.c c5471_serial.c c5471_timerisr.c c5471_watchdog.c \
+		  c5471_ethernet.c

arch/arm/src/c5471/c5471_irq.c

@@ -0,0 +1,242 @@
+/************************************************************
+ * c5471/c5471_irq.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/irq.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+#define ILR_EDGESENSITIVE 0x00000020
+#define ILR_PRIORITY      0x0000001E
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+uint32 *current_regs;
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/* The value of _vflashstart is defined in ld.script.  It
+ * could be hard-coded because we know that correct IRAM
+ * area is 0xffc00000.
+ */
+
+extern int _svectors; /* Type does not matter */
+
+/* The C5471 has FLASH at the low end of memory.  The
+ * rrload bootloaer will catch all interrupts and re-vector
+ * them to vectors stored in IRAM.  The following table is
+ * used to initialize those vectors.
+ */
+
+static up_vector_t g_vectorinittab[] =
+{
+  (up_vector_t)NULL,
+  up_vectorundefinsn,
+  up_vectorswi,
+  up_vectorprefetch,
+  up_vectordata,
+  up_vectoraddrexcptn,
+  up_vectorirq,
+  up_vectorfiq
+};
+#define NVECTORS ((sizeof(g_vectorinittab)) / sizeof(up_vector_t))
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_ackirq
+ *
+ * Description:
+ *   Acknowlede the IRQ.Bit 0 of the Interrupt Control
+ *   Register ==  New IRQ agreement (NEW_IRQ_AGR). Reset IRQ
+ *   output. Clear source IRQ register. Enables a new IRQ
+ *   generation. Reset by internal logic.
+ *
+ ************************************************************/
+
+static inline void up_ackirq(unsigned int irq)
+{
+  uint32 reg;
+  reg = getreg32(SRC_IRQ_REG);              /* Insure appropriate IT_REG bit clears */
+  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
+}
+
+/************************************************************
+ * Name: up_ackfiq
+ *
+ * Description:
+ *   Acknowledge the FIQ.  Bit 1 of the Interrupt Control
+ *   Register ==  New FIQ agreement (NEW_FIQ_AGR). Reset FIQ
+ *   output. Clear source FIQ register. Enables a new FIQ
+ *   generation. Reset by internal logic.
+ *
+ ************************************************************/
+
+static inline void up_ackfiq(unsigned int irq)
+{
+  uint32 reg;
+  reg = getreg32(SRC_FIQ_REG);              /* Insure appropriate IT_REG bit clears */
+  putreg32(reg | 0x00000002, INT_CTRL_REG); /* write the NEW_FIQ_AGR bit. */
+}
+
+/************************************************************
+ * Name: up_vectorinitialize
+ ************************************************************/
+
+static inline void up_vectorinitialize(void)
+{
+  up_vector_t *src  = g_vectorinittab;
+  up_vector_t *dest = (up_vector_t*)&_svectors;
+  int i;
+
+  for (i = 0; i < NVECTORS; i++)
+    {
+      *dest++ = *src++;
+    }
+}
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_irqinitialize
+ ************************************************************/
+
+void up_irqinitialize(void)
+{
+  /* Disable all interrupts. */
+
+  putreg32(0x0000ffff, MASK_IT_REG);
+
+  /* Clear any pending interrupts */
+
+  up_ackirq(0);
+  up_ackfiq(0);
+  putreg32(0x00000000, IT_REG);
+
+  /* Override hardware defaults */
+
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ2_REG);
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ4_REG);
+  putreg32(ILR_PRIORITY,                     ILR_IRQ6_REG);
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ15_REG);
+
+  /* Initialize hardware interrupt vectors */
+
+  up_vectorinitialize();
+  current_regs = NULL;
+
+  /* And finally, enable interrupts */
+
+#ifndef CONFIG_SUPPRESS_INTERRUPTS
+  irqrestore(SVC_MODE | PSR_F_BIT);
+#endif
+}
+
+/************************************************************
+ * Name: up_disable_irq
+ *
+ * Description:
+ *   Disable the IRQ specified by 'irq'
+ *
+ ************************************************************/
+
+void up_disable_irq(int irq)
+{
+  if ((unsigned)irq < NR_IRQS)
+    {
+      uint32 reg = getreg32(MASK_IT_REG);
+      putreg32(reg | (1 << irq), MASK_IT_REG);
+    }
+}
+
+/************************************************************
+ * Name: up_enable_irq
+ *
+ * Description:
+ *   Enable the IRQ specified by 'irq'
+ *
+ ************************************************************/
+
+void up_enable_irq(int irq)
+{
+  if ((unsigned)irq < NR_IRQS)
+    {
+      uint32 reg = getreg32(MASK_IT_REG);
+      putreg32(reg & ~(1 << irq), MASK_IT_REG);
+    }
+}
+
+/************************************************************
+ * Name: up_maskack_irq
+ *
+ * Description:
+ *   Mask the IRQ and acknowledge it
+ *
+ ************************************************************/
+
+void up_maskack_irq(int irq)
+{
+  uint32 reg = getreg32(INT_CTRL_REG);
+
+  /* Mask the interrupt */
+
+  reg = getreg32(MASK_IT_REG);
+  putreg32(reg | (1 << irq), MASK_IT_REG);
+
+  /* Set the NEW_IRQ_AGR bit.  This clears the IRQ src register
+   * enables generation of a new IRQ.
+   */
+
+  reg = getreg32(INT_CTRL_REG);
+  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
+}

arch/arm/src/c5471/c5471_lowputc.S

@@ -0,0 +1,127 @@
+/**************************************************************************
+ * c5471/c5471_lowputc.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_lowputc
+ **************************************************************************/
+
+/* This assembly language version has the advantage that it can does not
+ * require a C stack and uses only r0-r1.  Hence it can be used during
+ * early boot phases.
+ */
+
+	.text
+	.global	up_lowputc
+	.type	up_lowputc, function
+up_lowputc:
+	/* On entry, r0 holds the character to be printed */
+
+#ifdef CONFIG_SERIAL_IRDA_CONSOLE
+	ldr	r2, =UART_IRDA_BASE	/* r2=IRDA UART base */
+#else
+	ldr	r2, =UART_MODEM_BASE	/* r2=Modem UART base */
+#endif
+
+	/* Poll bit 0 of the UART_SSR register.  When the bit
+	 * is clear, the TX FIFO is no longer full
+	 */
+
+1:	ldr	r1, [r2, #UART_SSR_OFFS]
+	tst	r1, #UART_SSR_TXFULL
+	bne	1b
+
+	/* Send the character by writing it into the UART_THR
+	 * register.
+	 */
+
+	str     r0, [r2, #UART_THR_OFFS]
+
+	/* Wait for the tranmsit holding regiser (THR) to be
+	 * emptied. This is detemined when bit 6 of the LSR
+	 * is set.
+	 */
+
+2:	ldr     r1, [r2, #UART_LSR_OFFS]
+	tst     r1, #0x00000020
+	beq     2b
+
+	/* If the character that we just sent was a linefeed,
+	 * then send a carriage return as well.
+	 */
+
+	teq     r0, #'\n'
+	moveq   r0, #'\r'
+	beq     1b
+
+	/* And return */
+
+	mov     pc, lr
+

arch/arm/src/c5471/c5471_timerisr.c

@@ -0,0 +1,125 @@
+/************************************************************
+ * c5471/c5471_timerisr.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "clock_internal.h"
+#include "up_internal.h"
+#include "up_arch.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* We want the general purpose timer running at the rate
+ * MSEC_PER_TICK. The C5471 clock is 47.5MHz and we're using
+ * a timer PTV value of 3 (3 == divide incoming frequency by
+ * 16) which then yields a 16 bitCLKS_PER_INT value
+ * of 29687.
+ *
+ *   47500000 / 16 = 2968750 clocks/sec
+ *   2968750 / 100 = 29687   clocks/ 100Hz interrupt
+ *
+ */
+
+#define CLKS_PER_INT       29687
+#define CLKS_PER_INT_SHIFT 5
+#define AR                 0x00000010
+#define ST                 0x00000008
+#define PTV                0x00000003
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Function:  up_timerisr
+ *
+ * Description:
+ *   The timer ISR will perform a variety of services for
+ *   various portions of the systems.
+ *
+ ************************************************************/
+
+int up_timerisr(int irq, uint32 *regs)
+{
+   /* Process timer interrupt */
+
+   sched_process_timer();
+   return 0;
+}
+
+/************************************************************
+ * Function:  up_timerinit
+ *
+ * Description:
+ *   This function is called during start-up to initialize
+ *   the timer interrupt.
+ *
+ ************************************************************/
+
+void up_timerinit(void)
+{
+  uint32 val;
+
+  up_disable_irq(C5471_IRQ_SYSTIMER);
+
+  /* Start the general purpose timer running in auto-reload mode
+   * so that an interrupt is generated at the rate MSEC_PER_TICK.
+   */
+
+  val = ((CLKS_PER_INT-1) << CLKS_PER_INT_SHIFT) | AR | ST | PTV;
+  putreg32(val, C5471_TIMER2_CTRL);
+
+  /* Attach and enable the timer interrupt */
+
+  irq_attach(C5471_IRQ_SYSTIMER, (xcpt_t)up_timerisr);
+  up_enable_irq(C5471_IRQ_SYSTIMER);
+}
+

arch/arm/src/c5471/c5471_vectors.S

@@ -0,0 +1,449 @@
+/********************************************************************
+ * c5471/c5471_vectors.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/irq.h>
+#include "up_arch.h"
+
+/********************************************************************
+ * Definitions
+ ********************************************************************/
+
+/********************************************************************
+ * Global Data
+ ********************************************************************/
+
+	.data
+g_irqtmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+g_undeftmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+g_aborttmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+
+/********************************************************************
+ * Assembly Macros
+ ********************************************************************/
+
+/********************************************************************
+ * Private Functions
+ ********************************************************************/
+
+	.text
+
+/********************************************************************
+ * Public Functions
+ ********************************************************************/
+
+	.text
+
+/********************************************************************
+ * Name: up_vectorirq
+ *
+ * Description:
+ *   Interrupt excetpion. Entered in IRQ mode with spsr = SVC
+ *   CPSR, lr = SVC PC
+ ********************************************************************/
+
+	.globl	up_vectorirq
+	.type	up_vectorirq, %function
+up_vectorirq:
+	/* On entry, we are in IRQ mode.  We are free to use
+	 * the IRQ mode r13 and r14.
+         *
+	 */
+
+	ldr	r13, .Lirqtmp
+	sub	lr, lr, #4
+	str	lr, [r13]			@ save lr_IRQ
+	mrs	lr, spsr
+	str	lr, [r13, #4]			@ save spsr_IRQ
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lirqtmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Now decode the interrupt */
+
+#if 0
+	ldr	lr, =SRC_IRQ_BIN_REG	/* Fetch encoded IRQ */
+	ldr	r0, [lr]
+	and	r0, r0, #0x0f		/* Valid range is 0..15 */
+
+	/* Problems here... cannot read SRC_IRQ_BIN_REQ (and/or
+	 * SRC_IRQ_REQ because this will clear edge triggered
+	 * interrupts.  Plus, no way to validate spurious
+	 * interrupt.
+	 */
+#else
+	ldr	r6, =SRC_IRQ_REG
+	ldr     r6, [r6]		/* Get source IRQ reg */
+	mov     r0, #0			/* Assume IRQ0_IRQ set */
+.Lmorebits:
+	tst     r6, #1			/* Is IRQ set? */
+	bne     .Lhaveirq		/* Yes... we have the IRQ */
+	add     r0, r0, #1		/* Setup next IRQ */
+	mov     r6, r6, lsr #1		/* Shift right one */
+	cmp     r0, #16			/* Only 16 valid bits */
+	bcc     .Lmorebits		/* Keep until we have looked
+					 * at all bits */
+	b	.Lnoirqset		/* If we get here, there is
+					 * no pending interrupt */
+.Lhaveirq:
+#endif
+	/* Then call the IRQ handler with interrupt disabled. */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r1, sp			/* Get r1=xcp */
+	bl	up_doirq		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+.Lnoirqset:
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lirqtmp:
+	.word	g_irqtmp
+
+	.align	5
+
+/********************************************************************
+ * Function: up_vectorswi
+ * 
+ * Description:
+ *   SWI interrupt. We enter the SWI in SVC mode
+ ********************************************************************/
+
+	.globl	up_vectorswi
+	.type	up_vectorswi, %function
+up_vectorswi:
+
+	/* The c547x rrload bootloader intemediates all
+	 * interrupts.  For the* case of the SWI, it mucked
+	 * with the stack to create some temporary registers.
+	 * We'll have to recover from this mucking here.
+	 */
+
+	ldr	r14, [sp,#-0x4]		/* rrload workaround */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp), r14(lr), r15(pc)
+	 * and CPSR in r1-r4 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14			/* R14 is altered on return from SWI */
+	mov	r3, r14			/* Save r14 as the PC as well */
+	mrs	r4, spsr		/* Get the saved CPSR */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the SWI handler with interrupt disabled.
+	 * void up_syscall(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_syscall		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectordata
+ *
+ * Description:
+ *   Data abort Exception dispatcher. Give control to data
+ *   abort handler.  This function is entered in ABORT mode
+ *   with spsr = SVC CPSR, lr = SVC PC
+ *
+ ********************************************************************/
+	
+	.globl	up_vectordata
+	.type	up_vectordata, %function
+up_vectordata:
+	/* On entry we are free to use the ABORT mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Ldaborttmp	/* Points to temp storage */
+	sub	lr, lr, #8		/* Fixup return */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Ldaborttmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the data abort handler with interrupt disabled.
+	 * void up_dataabort(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_dataabort		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Ldaborttmp:
+	.word	g_aborttmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorprefetch
+ *
+ * Description:
+ *    Prefetch abort exception.  Entered in ABT mode with
+ *    spsr = SVC CPSR, lr = SVC PC
+ ********************************************************************/
+	
+	.globl	up_vectorprefetch
+	.type	up_vectorprefetch, %function
+up_vectorprefetch:
+	/* On entry we are free to use the ABORT mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Lpaborttmp	/* Points to temp storage */
+	sub	lr, lr, #4		/* Fixup return */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lpaborttmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the prefetch abort handler with interrupt disabled.
+	 * void up_prefetchabort(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_prefetchabort	/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lpaborttmp:
+	.word	g_aborttmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorundefinsn
+ *
+ * Description:
+ *   Undefined instruction entry exception.  Entered in
+ *   UND mode, spsr = SVC  CPSR, lr = SVC PC
+ *
+ ********************************************************************/
+	
+	.globl	up_vectorundefinsn
+	.type	up_vectorundefinsn, %function
+up_vectorundefinsn:
+	/* On entry we are free to use the UND mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Lundeftmp		/* Points to temp storage */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lundeftmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the undef insn handler with interrupt disabled.
+	 * void up_undefinedinsn(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_undefinedinsn	/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lundeftmp:
+	.word	g_undeftmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorfiq
+ *
+ * Description:
+ *   Shouldn't happen
+ ********************************************************************/
+
+	.globl	up_vectorfiq
+	.type	up_vectorfiq, %function
+up_vectorfiq:
+	subs	pc, lr, #4
+
+/********************************************************************
+ *  Name: up_vectoraddrexcption
+ *
+ * Description:
+ *   Shouldn't happen
+ *
+ ********************************************************************/
+
+	.globl	up_vectoraddrexcptn
+	.type	up_vectoraddrexcptn, %function
+up_vectoraddrexcptn:
+	b	up_vectoraddrexcptn
+	.end

arch/arm/src/c5471/c5471_watchdog.c

@@ -0,0 +1,392 @@
+/**************************************************************************
+ * c5471/c5471_watchdog.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+#include <nuttx/fs.h>
+#include <nuttx/irq.h>
+#include <arch/watchdog.h>
+#include "up_arch.h"
+
+/**************************************************************************
+ * Definitions
+ **************************************************************************/
+
+#undef CONFIG_SOFTWARE_TEST
+#undef CONFIG_SOFTWARE_REBOOT
+#undef CONFIG_WATCHDOG_STRICT
+
+#define MAX_WDT_USEC           353200
+#define MAX_PRESCALER          256
+#define C5471_TIMER_STOP       0
+
+#define C5471_TIMER_PRESCALER  0x07          /* Bits 0-2: Prescale value */
+#define C5471_TIMER_STARTBIT   (1 << 3)      /* Bit 3: Start timer bit */
+#define C5471_TIMER_AUTORELOAD (1 << 4)      /* Bit 4: Auto-reload timer */
+#define C5471_TIMER_LOADTIM    (0xffff << 5) /* Bits 20-5: Load timer value */
+#define C5471_TIMER_MODE       (1 << 21)     /* Bit 21: Timer mode */
+#define C5471_DISABLE_VALUE1   (0xf5 << 22)  /* Bits 29-22: WD disable */
+#define C5471_DISABLE_VALUE2   (0xa0 << 22)
+
+#define CLOCK_KHZ              47500
+#define CLOCK_MHZx2            95
+
+/* Macros to manage access to to watchdog timer macros */
+
+#define c5471_wdt_cntl  (*(volatile uint32*)C5471_TIMER0_CTRL)
+#define c5471_wdt_count (*(volatile uint32*)C5471_TIMER0_CNT)
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/* Local implementation of timer interface */
+
+static inline unsigned int wdt_prescaletoptv(unsigned int prescale);
+
+static int     wdt_setusec(uint32 usec);
+static int     wdt_interrupt(int irq, void *context);
+
+static int     wdt_open(struct file *filep);
+static int     wdt_close(struct file *filep);
+static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen);
+static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen);
+static int     wdt_ioctl(struct file *filep, int cmd, uint32 arg);
+
+/**************************************************************************
+ * Private Data
+ **************************************************************************/
+
+static boolean g_wdtopen;
+
+struct file_operations g_wdtops =
+{
+  .open  = wdt_open,
+  .close = wdt_close,
+  .read  = wdt_read,
+  .write = wdt_write,
+  .ioctl = wdt_ioctl,
+};
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: wdt_prescaletoptv
+ **************************************************************************/
+
+static inline unsigned int wdt_prescaletoptv(unsigned int prescale)
+{
+  unsigned int ptv = 0;
+
+  if (prescale > 255)
+    {
+      ptv = 7;
+    }
+  else
+    {
+      unsigned int value = prescale >> 1;
+
+      /* 0: 0-2
+       * 1: 3-4
+       * 2: 5-8
+       * 3: 9-16
+       * 4: 17-32
+       * 5: 33-64
+       * 6: 65-128
+       * 7: 129-
+       */
+
+      while (value > 1)
+        {
+          value >>= 1;
+          ptv++;
+        }
+    }
+
+  dbg("prescale=%d -> ptv=%d\n", prescale, ptv);
+  return ptv;
+}
+
+/**************************************************************************
+ * Name: wdt_setusec
+ **************************************************************************/
+
+static int wdt_setusec(uint32 usec)
+{
+  /* prescaler: clock / prescaler = #clock ticks per counter in ptv
+   * divisor:   #counts until the interrupt comes.
+   */
+
+  uint32 prescaler = MAX_PRESCALER;
+  uint32 divisor   = 1;
+  uint32 mode;
+
+  dbg("usec=%d\n", usec);
+
+  /* Calculate a value of prescaler and divisor that will be able
+   * to count to the usec.  It may not be exact or the best
+   * possible set, but it's a quick and simple algorithm.
+   *
+   *    divisor max = 0x10000
+   *    prescaler max = MAX_PRESCALER
+   */
+
+  do
+    {
+      divisor = (CLOCK_MHZx2 * usec) / (prescaler * 2);
+      dbg("divisor=0x%x prescaler=0x%x\n", divisor, prescaler);
+
+      if (divisor >= 0x10000)
+        {
+          if (prescaler == MAX_PRESCALER)
+            { 
+              /* This is the max possible ~2.5 seconds. */
+
+              dbg("prescaler=0x%x too big!\n", prescaler);
+              return ERROR;
+            }
+
+          prescaler <<= 1;
+          if (prescaler > MAX_PRESCALER)
+            {
+              prescaler = MAX_PRESCALER;
+            }
+        }
+    }
+  while (divisor >= 0x10000);
+
+  dbg("prescaler=0x%x divisor=0x%x\n", prescaler, divisor);
+
+  mode  = wdt_prescaletoptv(prescaler);
+  mode &= ~C5471_TIMER_AUTORELOAD; /* One shot mode. */
+  mode |= divisor << 5;
+  dbg("mode=0x%x\n", mode);
+
+  c5471_wdt_cntl = mode;
+
+  /* Now start the watchdog */
+
+  c5471_wdt_cntl |= C5471_TIMER_STARTBIT;
+  dbg("cntl_timer=0x%x\n", c5471_wdt_cntl);
+
+  return 0;
+}
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: wdt_interrupt
+ **************************************************************************/
+
+static int wdt_interrupt(int irq, void *context)
+{
+  dbg("expired\n");
+
+#if defined(CONFIG_SOFTWARE_REBOOT)
+#  if defined(CONFIG_SOFTWARE_TEST)
+  dbg("  Test only\n");
+#  else
+  dbg("  Re-booting\n");
+#    warning "Add logic to reset CPU here"
+#  endif
+#else
+  dbg("  No reboot\n");
+#endif
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_read
+ **************************************************************************/
+
+static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen)
+{
+  /* We are going to return "NNNNNNNN NNNNNNNN."  The followig logic will
+   * not work if the user provides a buffer smaller than 18 bytes.
+   */
+
+  dbg("buflen=%d\n", buflen);
+  if (buflen >= 18)
+    {
+      sprintf(buffer, "#08x %08x\n", c5471_wdt_cntl, c5471_wdt_count);
+      return 18;
+    }
+  return 0;
+}
+
+/**************************************************************************
+ * Name: wdt_write
+ **************************************************************************/
+
+static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen)
+{
+  dbg("buflen=%d\n", buflen);
+  if (buflen)
+    {
+      /* Reset the timer to the maximum delay */
+
+      wdt_setusec(MAX_WDT_USEC);
+      return 1;
+    }
+
+  return 0;
+}
+
+/**************************************************************************
+ * Name: wdt_ioctl
+ **************************************************************************/
+
+static int wdt_ioctl(struct file *filep, int cmd, uint32 arg)
+{
+  dbg("ioctl Call: cmd=0x%x arg=0x%x", cmd, arg);
+
+  /* Process the the IOCTL command (see arch/watchdog.h) */
+
+  switch(cmd)
+    {
+    case WDIOC_KEEPALIVE:
+      wdt_setusec(MAX_WDT_USEC);
+      break;
+
+    default:
+      *get_errno_ptr() = ENOTTY;
+      return ERROR;
+    }
+
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_open
+ **************************************************************************/
+
+static int wdt_open(struct file *filep)
+{
+  dbg("");
+
+  if (g_wdtopen)
+    {
+      *get_errno_ptr() = EBUSY;
+    }
+
+  /* This will automatically load the timer with its max
+   * count and start it running.
+   */
+
+  c5471_wdt_cntl = C5471_DISABLE_VALUE1;
+  c5471_wdt_cntl = C5471_DISABLE_VALUE2;
+
+  g_wdtopen = TRUE;
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_close
+ **************************************************************************/
+
+static int wdt_close(struct file *filep)
+{
+  dbg("");
+
+  /* The task controlling the watchdog has terminated.  Take the timer
+   *  the
+   * watchdog in interrupt mode -- we are going to reset unless the
+   * reopened again soon.
+   */
+
+#ifndef CONFIG_WATCHDOG_STRICT
+  c5471_wdt_cntl = C5471_TIMER_MODE;
+#endif
+
+  g_wdtopen = FALSE;
+  return 0;
+}
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_wdtinit
+ **************************************************************************/
+
+int up_wdtinit(void)
+{
+  int ret;
+
+  dbg("C547x Watchdog Driver\n");
+
+  /* Register as /dev/wdt */
+
+  ret = register_driver("/dev/wdt", &g_wdtops, 0666, NULL);
+  if (ret)
+    {
+      return ERROR;
+    }
+
+  /* Register for an interrupt level callback through wdt_interrupt */
+
+  dbg("Attach to IRQ=%d\n", C5471_IRQ_WATCHDOG);
+
+  /* Make sure that the timer is stopped */
+
+  c5471_wdt_cntl = C5471_TIMER_STOP;
+
+  /* Request the interrupt. */
+
+  ret = irq_attach(C5471_IRQ_WATCHDOG, wdt_interrupt);
+  if (ret)
+    {
+      unregister_driver("/dev/wdt");
+      return ERROR;
+    }
+
+  return OK;
+}

arch/arm/src/c5471/chip.h

@@ -0,0 +1,371 @@
+/****************************************************************************
+ * c5471/chip.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __C5471_CHIP_H
+#define __C5471_CHIP_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+#define EIM_RAM_START          0xffd00000
+
+/* Ethernet Interface Module (EIM) ******************************************/
+
+#define EIM_CTRL               0xffff0000 /* ESM control register */
+#define EIM_STATUS             0xffff0004 /* ESM status register */
+#define EIM_CPU_TXBA           0xffff0008 /* CPU TX descriptors base address */
+#define EIM_CPU_RXBA           0xffff000c /* CPU RX descriptors base address */
+#define EIM_BUFSIZE            0xffff0010 /* Packet buffer size register */
+#define EIM_CPU_FILTER         0xffff0014 /* CPU filtering contol registers */
+#define EIM_CPU_DAHI           0xffff0018 /* CPU destination address (HI) */
+#define EIM_CPU_DALO           0xffff001c /* CPU destination address (LO) */
+#define EIM_MFVHI              0xffff0020 /* Multicast filter valid (HI) */
+#define EIM_MFVLO              0xffff0024 /* Multicast filter valid (LO) */
+#define EIM_MFMHI              0xffff0028 /* Multicast filter mask (HI) */
+#define EIM_MFMLO              0xffff002c /* Multicast filter mask (LO) */
+#define EIM_RXTH               0xffff0030 /* RX threshold register */
+#define EIM_CPU_RXREADY        0xffff0034 /* CPU RX ready register */
+#define EIM_INTEN              0xffff0038 /* ESM interrupt enable register */
+#define EIM_ENET0_TXDESC       0xffff0040 /* ENET0 TX Queue pointer */
+#define EIM_ENET0_RXDESC       0xffff0044 /* ENET0 RX Queue pointer */
+#define EIM_CPU_TXDESC         0xffff0050 /* CPU TX Queue pointer */
+#define EIM_CPU_RXDESC         0xffff0054 /* CPU RX Queue pointer */
+
+#define ENET0_MODE             0xffff0100 /* Mode register */
+#define ENET0_BOFFSEED         0xffff0104 /* Backoff seed register */
+#define ENET0_BCOUNT           0xffff0108 /* Backoff count register */
+#define ENET0_FLWPAUSE         0xffff010c /* TX flow pause count register */
+#define ENET0_FLWCONTROL       0xffff0110 /* Flow control register */
+#define ENET0_VTYPE            0xffff0114 /* VTYPE tag register */
+#define ENET0_SEISR            0xffff0118 /* System error int status register */
+#define ENET0_TXBUFRDY         0xffff011c /* TX descripter buffer ready */
+#define ENET0_TDBA             0xffff0120 /* TX descriptor base address */
+#define ENET0_RDBA             0xffff0124 /* RX descriptor base address */
+#define ENET0_PARHI            0xffff0128 /* Dest phys address match (HI) */
+#define ENET0_PARLO            0xffff012c /* Dest phys address match (LO) */
+#define ENET0_LARHI            0xffff0130 /* Log address hash filter (HI) */
+#define ENET0_LARLO            0xffff0134 /* Log address hash filter (LO) */
+#define ENET0_ADRMODE_EN       0xffff0138 /* Address mode enable register */
+#define ENET0_DRP              0xffff013c /* Desc ring poll interval count */
+
+/* UARTs ********************************************************************/
+
+#define UART_IRDA_BASE         0xffff0800
+#define UART_MODEM_BASE        0xffff1000
+#define UARTn_IO_RANGE         0x00000800
+
+/* Common UART Registers.  Expressed as offsets from the BASE address */
+
+#define UART_RHR_OFFS          0x00000000 /* Rcv Holding Register */
+#define UART_THR_OFFS          0x00000004 /* Xmit Holding Register */
+#define UART_FCR_OFFS          0x00000008 /* FIFO Control Register */
+#define UART_RFCR_OFFS         0x00000008 /* Rcv FIFO Control Register */
+#define UART_TFCR_OFFS         0x00000008 /* Xmit FIFO Control Register */
+#define UART_SCR_OFFS          0x0000000c /* Status Control Register */
+#define UART_LCR_OFFS          0x00000010 /* Line Control Register */
+#define UART_LSR_OFFS          0x00000014 /* Line Status Register */
+#define UART_SSR_OFFS          0x00000018 /* Supplementary Status Register */
+#define UART_MCR_OFFS          0x0000001c /* Modem Control Register */
+#define UART_MSR_OFFS          0x00000020 /* Modem Status Register */
+#define UART_IER_OFFS          0x00000024 /* Interrupt Enable Register */
+#define UART_ISR_OFFS          0x00000028 /* Interrupt Status Register */
+#define UART_EFR_OFFS          0x0000002c /* Enhanced Feature Register */
+#define UART_XON1_OFFS         0x00000030 /* XON1 Character Register */
+#define UART_XON2_OFFS         0x00000034 /* XON2 Character Register */
+#define UART_XOFF1_OFFS        0x00000038 /* XOFF1 Character Register */
+#define UART_XOFF2_OFFS        0x0000003c /* XOFF2 Character Register */
+#define UART_SPR_OFFS          0x00000040 /* Scratch-pad Register */
+#define UART_DIV_115K_OFFS     0x00000044 /* Divisor for baud generation */
+#define UART_DIV_BIT_RATE_OFFS 0x00000048 /* For baud rate generation */
+#define UART_TCR_OFFS          0x0000004c /* Transmission Control Register */
+#define UART_TLR_OFFS          0x00000050 /* Trigger Level Register */
+#define UART_MDR_OFFS          0x00000054 /* Mode Definition Register */
+
+/* Registers available only for the IrDA UART (absolute address). */
+
+#define UART_IRDA_MDR1         0xffff0854 /* Mode Definition Register 1 */
+#define UART_IRDA_MDR2         0xffff0858 /* Mode Definition Register 2 */
+#define UART_IRDA_TXFLL        0xffff085c /* LS Xmit Frame Length Register */
+#define UART_IRDA_TXFLH        0xffff0860 /* MS Xmit Frame Length Register */
+#define UART_IRDA_RXFLL        0xffff0864 /* LS Rcvd Frame Length Register */
+#define UART_IRDA_RXFLH        0xffff0868 /* MS Rcvd Frame Length Register */
+#define UART_IRDA_SFLSR        0xffff086c /* Status FIFO Line Status Reg */
+#define UART_IRDA_SFREGL       0xffff0870 /* LS Status FIFO Register */
+#define UART_IRDA_SFREGH       0xffff0874 /* MS Status FIFO Register */
+#define UART_IRDA_BLR          0xffff0878 /* Begin of File Length Register */
+#define UART_IRDA_PULSE_WIDTH  0xffff087c /* Pulse Width Register */
+#define UART_IRDA_ACREG        0xffff0880 /* Auxiliary Control Register */
+#define UART_IRDA_PULSE_START  0xffff0884 /* Start time of pulse */
+#define UART_IRDA_RX_W_PTR     0xffff0888 /* RX FIFO write pointer */
+#define UART_IRDA_RX_R_PTR     0xffff088c /* RX FIFO read pointer */
+#define UART_IRDA_TX_W_PTR     0xffff0890 /* TX FIFO write pointer */
+#define UART_IRDA_TX_R_PTR     0xffff0894 /* TX FIFO read pointer */
+#define UART_IRDA_STATUS_W_PTR 0xffff0898 /* Write pointer of status FIFO */
+#define UART_IRDA_STATUS_R_PTR 0xffff089c /* Read pointer of status FIFO */
+#define UART_IRDA_RESUME       0xffff08a0 /* Resume register */
+#define UART_IRDA_MUX          0xffff08a4 /* Selects UART_IRDA output mux */
+
+/* Registers available for the Modem UART (absolute addresses) */
+
+#define UART_MODEM_MDR         0xffff1054 /* Mode Definition Register */
+#define UART_MODEM_UASR        0xffff1058 /* UART Auto-baud Status Register */
+#define UART_MODEM_RDPTR_URX   0xffff105c /* RX FIFO Read Pointer Register */
+#define UART_MODEM_WRPTR_URX   0xffff1060 /* RX FIFO Write Pointer Register */
+#define UART_MODEM_RDPTR_UTX   0xffff1064 /* TX FIFO Read Pointer Register */
+#define UART_MODEM_WRPTR_UTX   0xffff1068 /* TX FIFO Write Pointer Register */
+
+/* UART Settings ************************************************************/
+
+/* Miscellaneous UART settings. */
+
+#define UART_RX_FIFO_NOEMPTY 0x00000001
+#define UART_SSR_TXFULL      0x00000001
+#define UART_LSR_TREF        0x00000020
+
+#define UART_XMIT_FIFO_SIZE      64
+#define UART_IRDA_XMIT_FIFO_SIZE 64
+
+/* UART_LCR Register */
+                                        /* Bits 31-7: Reserved */
+#define UART_LCR_BOC         0x00000040 /* Bit 6: Break Control */
+                                        /* Bit 5: Parity Type 2 */
+#define UART_LCR_PAREVEN     0x00000010 /* Bit 4: Parity Type 1 */
+#define UART_LCR_PARODD      0x00000000
+#define UART_LCR_PAREN       0x00000008 /* Bit 3: Paity Enable */
+#define UART_LCR_PARDIS      0x00000000
+#define UART_LCR_2STOP       0x00000004 /* Bit 2: Number of stop bits */
+#define UART_LCR_1STOP       0x00000000
+#define UART_LCR_5BITS       0x00000000 /* Bits 0-1: Word-length */
+#define UART_LCR_6BITS       0x00000001
+#define UART_LCR_7BITS       0x00000002
+#define UART_LCR_8BITS       0x00000003
+
+#define UART_FCR_FTL         0x00000000
+#define UART_FCR_FIFO_EN     0x00000001
+#define UART_FCR_TX_CLR      0x00000002
+#define UART_FCR_RX_CLR      0x00000004
+
+#define UART_IER_RECVINT     0x00000001
+#define UART_IER_XMITINT     0x00000002
+#define UART_IER_LINESTSINT  0x00000004
+#define UART_IER_MODEMSTSINT 0x00000008 /* IrDA UART only */
+#define UART_IER_XOFFINT     0x00000020
+#define UART_IER_RTSINT      0x00000040 /* IrDA UART only */
+#define UART_IER_CTSINT      0x00000080 /* IrDA UART only */
+#define UART_IER_INTMASK     0x000000ff
+
+#define BAUD_115200          0x00000001
+#define BAUD_57600           0x00000002
+#define BAUD_38400           0x00000003
+#define BAUD_19200           0x00000006
+#define BAUD_9600            0x0000000C
+#define BAUD_4800            0x00000018
+#define BAUD_2400            0x00000030
+#define BAUD_1200            0x00000060
+
+#define MDR_UART_MODE        0x00000000  /* Both IrDA and Modem UARTs */
+#define MDR_SIR_MODE         0x00000001  /* IrDA UART only */
+#define MDR_AUTOBAUDING_MODE 0x00000002  /* Modem UART only */
+#define MDR_RESET_MODE       0x00000007  /* Both IrDA and Modem UARTs */
+
+/* SPI **********************************************************************/
+
+#define MAX_SPI 3
+
+#define SPI_REGISTER_BASE    0xffff2000
+
+/* GIO **********************************************************************/
+
+#define MAX_GIO (35)
+
+#define GIO_REGISTER_BASE    0xffff2800
+
+#define GPIO_IO              0xffff2800 /* Writeable when I/O is configured
+					 * as an output; reads value on I/O
+					 * pin when I/O is configured as an
+					 * input */
+#define GPIO_CIO             0xffff2804 /* GPIO configuration register */
+#define GPIO_IRQA            0xffff2808 /* In conjunction with GPIO_IRQB
+					 * determines the behavior when GPIO
+					 * pins configured as input IRQ */
+#define GPIO_IRQB            0xffff280c /* Determines the behavior when GPIO
+					 * pins configured as input IRQ */
+#define GPIO_DDIO            0xffff2810 /* Delta Detect Register
+					 * (detects changes in the I/O pins) */
+#define GPIO_EN              0xffff2814 /* Selects register for muxed GPIOs */
+
+#define KGIO_REGISTER_BASE   0xffff2900
+
+#define KBGPIO_IO            0xffff2900 /* Keyboard I/O bits: Writeable
+					 * when KBGPIO is configured as an
+					 * output; reads value on I/O pin
+					 * when KBGPIO is configured as an
+					 * input */
+#define KBGPIO_CIO           0xffff2904 /* KBGPIO configuration register */
+#define KBGPIO_IRQA          0xffff2908 /* In conjunction with KBGPIO_IRQB
+					 * determines the behavior when
+					 * KBGPIO pins configured as input
+					 * IRQ */
+#define KBGPIO_IRQB          0xffff290c /* In conjunction with KBGPIO_IRQA
+					 * determines the behavior when
+					 * KBGPIO pins configured as input
+					 * IRQ */
+#define KBGPIO_DDIO          0xffff2910 /* Delta Detect Register (detects
+					 * changes in the KBGPIO pins) */
+#define KBGPIO_EN            0xffff2914 /* Selects register for muxed
+					 * KBGPIOs */
+
+/* Timers *******************************************************************/
+
+#define C5471_TIMER0_CTRL    0xffff2a00
+#define C5471_TIMER0_CNT     0xffff2a04
+#define C5471_TIMER1_CTRL    0xffff2b00
+#define C5471_TIMER1_CNT     0xffff2b04
+#define C5471_TIMER2_CTRL    0xffff2c00
+
+#define C5471_TIMER2_CNT     0xffff2c04
+
+/* Interrupts */
+
+#define HAVE_SRC_IRQ_BIN_REG 0
+
+#define INT_FIRST_IO         0xffff2d00
+#define INT_IO_RANGE         0x5C
+
+#define IT_REG               0xffff2d00
+#define MASK_IT_REG          0xffff2d04
+#define SRC_IRQ_REG          0xffff2d08
+#define SRC_FIQ_REG          0xffff2d0c
+#define SRC_IRQ_BIN_REG      0xffff2d10
+#define INT_CTRL_REG         0xffff2d18
+
+#define ILR_IRQ0_REG         0xffff2d1C /*  0-Timer 0       */
+#define ILR_IRQ1_REG         0xffff2d20 /*  1-Timer 1       */
+#define ILR_IRQ2_REG         0xffff2d24 /*  2-Timer 2       */
+#define ILR_IRQ3_REG         0xffff2d28 /*  3-GPIO0         */
+#define ILR_IRQ4_REG         0xffff2d2c /*  4-Ethernet      */
+#define ILR_IRQ5_REG         0xffff2d30 /*  5-KBGPIO[7:0]   */
+#define ILR_IRQ6_REG         0xffff2d34 /*  6-Uart serial   */
+#define ILR_IRQ7_REG         0xffff2d38 /*  7-Uart IRDA     */
+#define ILR_IRQ8_REG         0xffff2d3c /*  8-KBGPIO[15:8]  */
+#define ILR_IRQ9_REG         0xffff2d40 /*  9-GPIO3         */
+#define ILR_IRQ10_REG        0xffff2d44 /* 10-GPIO2         */
+#define ILR_IRQ11_REG        0xffff2d48 /* 11-I2C           */
+#define ILR_IRQ12_REG        0xffff2d4c /* 12-GPIO1         */
+#define ILR_IRQ13_REG        0xffff2d50 /* 13-SPI           */
+#define ILR_IRQ14_REG        0xffff2d54 /* 14-GPIO[19:4]    */
+#define ILR_IRQ15_REG        0xffff2d58 /* 15-API           */
+
+/* CLKM *********************************************************************/
+
+#define CLKM                 0xffff2f00
+#define CLKM_CTL_RST         0xffff2f10
+#define CLKM_RESET           0xffff2f18
+
+#define CLKM_RESET_EIM          0x00000008
+#define CLKM_EIM_CLK_STOP       0x00000010
+#define CLKM_CTL_RST_LEAD_RESET 0x00000000
+#define CLKM_CTL_RST_EXT_RESET  0x00000002
+
+/* I2C **********************************************************************/
+
+#define MAX_I2C 1
+
+/* API **********************************************************************/
+
+#define DSPRAM_BASE          0xffe00000  /* DSPRAM base address */
+#define DSPRAM_END           0xffe03fff
+
+/* This is the API address range in the DSP address space. */
+
+#define DSPMEM_DSP_START     0x2000
+#define DSPMEM_DSP_END       0x3fff
+
+/* This is the API address range in the ARM address space. */
+
+#define DSPMEM_ARM_START     DSPRAM_BASE /* Defined in hardware.h */
+#define DSPMEM_ARM_END       DSPRAM_END
+
+/* DSPMEM_IN_RANGE is a generic macro to test is a value is within
+ * a range of values.
+ */
+
+#define DSPMEM_IN_RANGE(addr, start, end) \
+  ((((__u32)(addr)) >= (start)) && (((__u32)(addr)) <= (end)))
+
+/* DSPMEM_ADDR_ALIGNED verifies that a potential DSP address is
+ * properly word aligned.
+ */
+
+#define DSPMEM_ADDR_ALIGNED(addr, cpu) ((((__u32)(addr)) & 1) == 0)
+
+/* DSPMEM_DSP_ADDR checks if a DSP address lies in within the
+ * DSP's API address range.
+ */
+
+#define DSPMEM_DSP_ADDR(addr, cpu) \
+  DSPMEM_IN_RANGE(addr, DSPMEM_DSP_START, DSPMEM_DSP_END)
+
+/* DSPMEM_ARM_ADDR checks if a ARM address lies in within the
+ * ARM's API address range.
+ */
+
+#define DSPMEM_ARM_ADDR(addr) \
+  DSPMEM_IN_RANGE(addr, DSPMEM_ARM_START, DSPMEM_ARM_END)
+
+/* DSPMEM_DSP_TO_ARM maps a DSP API address into an ARM API address */
+
+#define DSPMEM_DSP_TO_ARM(addr, cpu) \
+  ((((__u32)(addr) - DSPMEM_DSP_START) << 1) + DSPMEM_ARM_START)
+
+/* DSPMEM_ARM_TO_DSP maps an ARM API address into a DSP API address */
+
+#define DSPMEM_ARM_TO_DSP(addr) \
+  ((((__u32)(addr) - DSPMEM_ARM_START) >> 1) + DSPMEM_DSP_START)
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#endif  /* __C5471_CHIP_H */

arch/arm/src/common/arm.h

@@ -0,0 +1,254 @@
+/************************************************************************************
+ * common/arm.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARM_H
+#define __ARM_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+# include <sys/types.h>
+#endif
+
+/**************************************************************************
+ * Conditional Compilation
+ **************************************************************************/
+
+#undef CONFIG_ALIGNMENT_TRAP
+#undef CONFIG_DCACHE_WRITETHROUGH
+#undef CONFIG_CACHE_ROUND_ROBIN
+#undef CONFIG_DCACHE_DISABLE
+#undef CONFIG_ICACHE_DISABLE
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* ARM9EJS **************************************************************************/
+
+/* PSR bits */
+
+#define MODE_MASK       0x0000001f
+#define USR26_MODE      0x00000000
+#define FIQ26_MODE      0x00000001
+#define IRQ26_MODE      0x00000002
+#define SVC26_MODE      0x00000003
+#define USR_MODE        0x00000010
+#define FIQ_MODE        0x00000011
+#define IRQ_MODE        0x00000012
+#define SVC_MODE        0x00000013
+#define ABT_MODE        0x00000017
+#define UND_MODE        0x0000001b
+#define MODE32_BIT      0x00000010
+#define SYSTEM_MODE     0x0000001f
+#define PSR_T_BIT       0x00000020
+#define PSR_F_BIT       0x00000040
+#define PSR_I_BIT       0x00000080
+#define PSR_J_BIT       0x01000000
+#define PSR_Q_BIT       0x08000000
+#define PSR_V_BIT       0x10000000
+#define PSR_C_BIT       0x20000000
+#define PSR_Z_BIT       0x40000000
+#define PSR_N_BIT       0x80000000
+
+/* CR1 bits (CP#15 CR1) */
+
+#define CR_M            0x00000001 /* MMU enable                          */
+#define CR_A            0x00000002 /* Alignment abort enable              */
+#define CR_C            0x00000004 /* Dcache enable                       */
+#define CR_W            0x00000008 /* Write buffer enable                 */
+#define CR_P            0x00000010 /* 32-bit exception handler            */
+#define CR_D            0x00000020 /* 32-bit data address range           */
+#define CR_L            0x00000040 /* Implementation defined              */
+#define CR_B            0x00000080 /* Big endian                          */
+#define CR_S            0x00000100 /* System MMU protection               */
+#define CR_R            0x00000200 /* ROM MMU protection                  */
+#define CR_F            0x00000400 /* Implementation defined              */
+#define CR_Z            0x00000800 /* Implementation defined              */
+#define CR_I            0x00001000 /* Icache enable                       */
+#define CR_V            0x00002000 /* Vectors relocated to 0xffff0000     */
+#define CR_RR           0x00004000 /* Round Robin cache replacement       */
+#define CR_L4           0x00008000 /* LDR pc can set T bit                */
+#define CR_DT           0x00010000
+#define CR_IT           0x00040000
+#define CR_ST           0x00080000
+#define CR_FI           0x00200000 /* Fast interrupt (lower latency mode) */
+#define CR_U            0x00400000 /* Unaligned access operation          */
+#define CR_XP           0x00800000 /* Extended page tables                */
+#define CR_VE           0x01000000 /* Vectored interrupts                 */
+
+/* Hardware page table definitions.
+ *
+ * Level 1 Descriptor (PMD)
+ *
+ * Common definitions.
+ */
+
+#define PMD_TYPE_MASK       0x00000003  /* Bits 1:0:   Type of descriptor */
+#define PMD_TYPE_FAULT      0x00000000
+#define PMD_TYPE_COARSE     0x00000001
+#define PMD_TYPE_SECT       0x00000002
+#define PMD_TYPE_FINE       0x00000003
+                                    /* Bits 3:2:   Depends on descriptor */
+#define PMD_BIT4            0x00000010  /* Bit  4:     Must be one */
+#define PMD_DOMAIN_MASK     0x000001e0  /* Bits 8:5:   Domain control bits */
+#define PMD_DOMAIN(x)       ((x) << 5)
+#define PMD_PROTECTION      0x00000200  /* Bit 9:      v5 only */
+                                    /* Bits 31:10: Depend on descriptor */
+
+/* Level 1 Section Descriptor.  Section descriptors allow fast, single
+ * level mapping between 1Mb address regions.
+ */
+                                        /* Bits 1:0:   Type of mapping */
+#define PMD_SECT_BUFFERABLE 0x00000004  /* Bit  2:     1=bufferable */
+#define PMD_SECT_CACHEABLE  0x00000008  /* Bit  3:     1=cacheable */
+                                        /* Bit  4:     Common, must be one */
+                                        /* Bits 8:5:   Common domain control */
+                                        /* Bit  9:     Common protection */
+#define PMD_SECT_AP_MASK    0x00000c00  /* Bits 11:10: Access permission */
+#define PMD_SECT_AP_WRITE   0x00000400
+#define PMD_SECT_AP_READ    0x00000800
+                                        /* Bits 19:20: Should be zero */
+#define PMD_SECT_TEX_MASK   0xfff00000  /* Bits 31:20: v5, Physical page */
+#define PMD_SECT_APX        0x00008000  /* Bit  15:    v6 only */
+#define PMD_SECT_S          0x00010000  /* Bit  16:    v6 only */
+#define PMD_SECT_nG         0x00020000  /* Bit  17:    v6 only */
+
+#define PMD_SECT_UNCACHED   (0)
+#define PMD_SECT_BUFFERED   (PMD_SECT_BUFFERABLE)
+#define PMD_SECT_WT         (PMD_SECT_CACHEABLE)
+#define PMD_SECT_WB         (PMD_SECT_CACHEABLE|PMD_SECT_BUFFERABLE)
+#define PMD_SECT_MINICACHE  (PMD_SECT_TEX(1)|PMD_SECT_CACHEABLE)
+#define PMD_SECT_WBWA       (PMD_SECT_TEX(1)|PMD_SECT_CACHEABLE|PMD_SECT_BUFFERABLE)
+
+/* Level 1 Coarse Table Descriptor.  Coarse Table Descriptors support
+ * two level mapping between 16Kb memory regions.
+ */
+                                        /* Bits 1:0:   Type of mapping */
+                                        /* Bits 3:2:   Should be zero */
+                                        /* Bit  4:     Common, must be one */
+                                        /* Bits 8:5:   Common domain control */
+                                        /* Bits 9:     Should be zero */
+#define PMD_COARSE_TEX_MASK 0xfffffc00  /* Bits 31:10: v5, Physical page */
+
+/* Level 1 Fine Table Descriptor.  Coarse Table Descriptors support
+ * two level mapping between 4Kb memory regions.
+ */
+
+                                        /* Bits 1:0:   Type of mapping */
+                                        /* Bits 3:2:   Should be zero */
+                                        /* Bit  4:     Common, must be one */
+                                        /* Bits 8:5:   Common domain control */
+                                        /* Bits 11:9:  Should be zero */
+#define PMD_FINE_TEX_MASK   0xfffff000  /* Bits 31:12: v5, Physical page */
+
+/* Level 2 Table Descriptor (PTE).  -- All tables */
+
+#define PTE_TYPE_MASK       (3 << 0)    /* Bits: 1:0:  Type of mapping */
+#define PTE_TYPE_FAULT      (0 << 0)    /*   None */
+#define PTE_TYPE_LARGE      (1 << 0)    /*   64Kb of memory */
+#define PTE_TYPE_SMALL      (2 << 0)    /*    4Kb of memory */
+#define PTE_TYPE_TINY       (3 << 0)    /*    1Kb of memory (v5)*/
+#define PTE_BUFFERABLE      (1 << 2)    /* Bit  2:     1=bufferable */
+#define PTE_CACHEABLE       (1 << 3)    /* Bit  3:     1=cacheable */
+                                        /* Bits 31:4:  Depend on type */
+
+/* Large page -- 64Kb */
+                                         /* Bits: 1:0:  Type of mapping */
+                                         /* Bits: 3:2:  Bufferable/cacheable */
+#define PTE_LARGE_AP_MASK    (0xff << 4) /* Bits 11:4   Access permissions */
+#define PTE_LARGE_AP_UNO_SRO (0x00 << 4)
+#define PTE_LARGE_AP_UNO_SRW (0x55 << 4)
+#define PTE_LARGE_AP_URO_SRW (0xaa << 4)
+#define PTE_LARGE_AP_URW_SRW (0xff << 4)
+                                         /* Bits 15:12: Should be zero */
+#define PTE_LARGE_TEX_MASK   0xffff0000  /* Bits 31:16: v5, Physical page */
+
+/* Small page -- 4Kb */
+
+                                         /* Bits: 1:0:  Type of mapping */
+                                         /* Bits: 3:2:  Bufferable/cacheable */
+#define PTE_SMALL_AP_MASK    (0xff << 4) /* Bits: 11:4: Access permissions */
+#define PTE_SMALL_AP_UNO_SRO (0x00 << 4)
+#define PTE_SMALL_AP_UNO_SRW (0x55 << 4)
+#define PTE_SMALL_AP_URO_SRW (0xaa << 4)
+#define PTE_SMALL_AP_URW_SRW (0xff << 4)
+#define PTE_SMALL_TEX_MASK   0xfffff000  /* Bits: 31:12: Physical page */
+
+/* Tiny page -- 1Kb */
+
+                                        /* Bits: 1:0:  Type of mapping */
+                                        /* Bits: 3:2:  Bufferable/cacheable */
+#define PTE_EXT_AP_MASK      (3 << 4)   /* Bits: 5:4:  Access persions */
+#define PTE_EXT_AP_UNO_SRO   (0 << 4)
+#define PTE_EXT_AP_UNO_SRW   (1 << 4)
+#define PTE_EXT_AP_URO_SRW   (2 << 4)
+#define PTE_EXT_AP_URW_SRW   (3 << 4)
+                                        /* Bits: 9:6:  Should be zero */
+#define PTE_TINY_TEX_MASK    0xfffffc00 /* Bits: 31:10: Physical page */
+
+/* Default MMU flags for memory and IO */
+
+#define MMU_MEMFLAGS \
+  (PMD_TYPE_SECT|PMD_SECT_WB|PMD_BIT4|PMD_SECT_AP_WRITE|PMD_SECT_AP_READ)
+
+#define MMU_IOFLAGS \
+  (PMD_TYPE_SECT|PMD_BIT4|PMD_SECT_AP_WRITE|PMD_SECT_AP_READ)
+
+#define MMU_L1_VECTORFLAGS   (PMD_TYPE_COARSE|PMD_BIT4)
+#define MMU_L2_VECTORFLAGS   (PTE_TYPE_SMALL|PTE_SMALL_AP_UNO_SRW)
+
+/* Mapped section size */
+
+#define SECTION_SIZE          (1 << 20)   /* 1Mb */
+
+/* We place the page tables 16K below the beginning of .text.  The
+ * following value is assume to be the (virtual) start address of
+ * .text.
+ */
+
+#define PGTABLE_SIZE          0x00004000
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#endif
+
+#endif  /* __ARM_H */

arch/arm/src/common/up_allocateheap.c

@@ -0,0 +1,79 @@
+/************************************************************
+ * common/up_allocateheap.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "up_arch.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_allocate_heap
+ *
+ * Description:
+ *   The heap may be statically allocated by
+ *   defining CONFIG_HEAP_BASE and CONFIG_HEAP_SIZE.  If these
+ *   are not defined, then this function will be called to
+ *   dynamically set aside the heap region.
+ *
+ ************************************************************/
+
+void up_allocate_heap(FAR void **heap_start, size_t *heap_size)
+{
+  up_ledon(LED_HEAPALLOCATE);
+  *heap_start = (FAR void*)g_heapbase;
+  *heap_size = CONFIG_DRAM_END - g_heapbase;
+}

arch/arm/src/common/up_arch.h

@@ -0,0 +1,92 @@
+/************************************************************************************
+ * common/up_arch.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __UP_ARCH_H
+#define __UP_ARCH_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <sys/types.h>
+#endif
+
+#include "arm.h"
+#include <arch/board/board.h>
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+# define getreg8(a)           (*(volatile ubyte *)(a))
+# define putreg8(v,a)         (*(volatile ubyte *)(a) = (v))
+# define getreg32(a)          (*(volatile uint32 *)(a))
+# define putreg32(v,a)        (*(volatile uint32 *)(a) = (v))
+
+/* Some compiler options will convert short loads and stores into byte loads
+ * and stores.  We don't want this to happen for IO reads and writes!
+ */
+
+/* # define getreg16(a)       (*(volatile uint16 *)(a)) */
+static inline uint16 getreg16(unsigned int addr)
+{
+  uint16 retval;
+ __asm__ __volatile__("\tldrh %0, [%1]\n\t" : "=r"(retval) : "r"(addr));
+  return retval;
+}
+
+/* define putreg16(v,a)       (*(volatile uint16 *)(a) = (v)) */
+static inline void putreg16(uint16 val, unsigned int addr)
+{
+ __asm__ __volatile__("\tstrh %0, [%1]\n\t": : "r"(val), "r"(addr));
+}
+
+/* Most DM320 registers are 16-bits wide */
+
+#define getreg(a)   getreg16(a)
+#define putreg(v,a) putreg16(v,a)
+
+#endif
+
+#endif  /* __UP_ARCH_H */

arch/arm/src/common/up_assert.c

@@ -0,0 +1,228 @@
+/****************************************************************************
+ * common/up_assert.c
+ *
+ *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <debug.h>
+
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Output debug info if stack dump is selected -- even if 
+ * debug is not selected.
+ */
+
+#ifdef CONFIG_ARCH_STACKDUMP
+# undef  lldbg
+# define lldbg lib_lowprintf
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_getsp
+ ****************************************************************************/
+
+/* I don't know if the builtin to get SP is enabled */
+
+static inline uint32 up_getsp(void)
+{
+  uint32 sp;
+  __asm__
+  (
+    "\tmov %0, sp\n\t"
+    : "=r"(sp)
+  );
+  return sp;
+}
+
+/****************************************************************************
+ * Name: up_stackdump
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_STACKDUMP
+static void up_stackdump(void)
+{
+  _TCB *rtcb        = (_TCB*)g_readytorun.head;
+  uint32 sp         = up_getsp();
+  uint32 stack_base;
+  uint32 stack_size;
+
+  if (rtcb->pid == 0)
+    {
+      stack_base = g_heapbase - 4;
+      stack_size = CONFIG_PROC_STACK_SIZE;
+    }
+  else
+    {
+      stack_base = (uint32)rtcb->adj_stack_ptr;
+      stack_size = (uint32)rtcb->adj_stack_size;
+    }
+
+  lldbg("stack_base: %08x\n", stack_base);
+  lldbg("stack_size: %08x\n", stack_size);
+  lldbg("sp:         %08x\n", sp);
+
+  if (sp >= stack_base || sp < stack_base - stack_size)
+    {
+      lldbg("ERROR: Stack pointer is not within allocated stack\n");
+      return;
+    }
+  else
+    {
+      uint32 stack = sp & ~0x1f;
+
+      for (stack = sp & ~0x1f; stack < stack_base; stack += 32)
+        {
+          uint32 *ptr = (uint32*)stack;
+          lldbg("%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+                 stack, ptr[0], ptr[1], ptr[2], ptr[3],
+                 ptr[4], ptr[5], ptr[6], ptr[7]);
+        }
+    }
+
+  if (current_regs)
+    {
+      int regs;
+
+      for (regs = REG_R0; regs <= REG_R15; regs += 8)
+        {
+          uint32 *ptr = (uint32*)&current_regs[regs];
+          lldbg("R%d: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+                 regs, ptr[0], ptr[1], ptr[2], ptr[3],
+                 ptr[4], ptr[5], ptr[6], ptr[7]);
+        }
+      lldbg("CPSR: %08x\n", current_regs[REG_CPSR]);
+    }
+}
+#else
+# define up_stackdump()
+#endif
+
+/****************************************************************************
+ * Name: _up_assert
+ ****************************************************************************/
+
+static void _up_assert(int errorcode) /* __attribute__ ((noreturn)) */
+{
+  /* Are we in an interrupt handler or the idle task? */
+
+  if (current_regs || ((_TCB*)g_readytorun.head)->pid == 0)
+    {
+       (void)irqsave();
+        for(;;)
+          {
+#ifdef CONFIG_ARCH_LEDS
+            up_ledon(LED_PANIC);
+            up_mdelay(250);
+            up_ledoff(LED_PANIC);
+            up_mdelay(250);
+#endif
+          }
+    }
+  else
+    {
+      exit(errorcode);
+    }
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_assert
+ ****************************************************************************/
+
+void up_assert(const ubyte *filename, int lineno)
+{
+#if CONFIG_TASK_NAME_SIZE > 0 && defined(CONFIG_DEBUG)
+  _TCB *rtcb = (_TCB*)g_readytorun.head;
+#endif
+
+  up_ledon(LED_ASSERTION);
+#if CONFIG_TASK_NAME_SIZE > 0
+  lldbg("Assertion failed at file:%s line: %d task: %s\n",
+        filename, lineno, rtcb->name);
+#else
+  lldbg("Assertion failed at file:%s line: %d\n",
+        filename, lineno);
+#endif
+  up_stackdump();
+  _up_assert(EXIT_FAILURE);
+}
+
+/****************************************************************************
+ * Name: up_assert_code
+ ****************************************************************************/
+
+void up_assert_code(const ubyte *filename, int lineno, int errorcode)
+{
+#if CONFIG_TASK_NAME_SIZE > 0 && defined(CONFIG_DEBUG)
+  _TCB *rtcb = (_TCB*)g_readytorun.head;
+#endif
+
+  up_ledon(LED_ASSERTION);
+#if CONFIG_TASK_NAME_SIZE > 0
+  lldbg("Assertion failed at file:%s line: %d task: %s error code: %d\n",
+        filename, lineno, rtcb->name, errorcode);
+#else
+  lldbg("Assertion failed at file:%s line: %d error code: %d\n",
+        filename, lineno, errorcode);
+#endif
+  up_stackdump();
+  _up_assert(errorcode);
+}

arch/arm/src/common/up_blocktask.c

@@ -0,0 +1,164 @@
+/************************************************************
+ * common/up_blocktask.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_block_task
+ *
+ * Description:
+ *   The currently executing task at the head of
+ *   the ready to run list must be stopped.  Save its context
+ *   and move it to the inactive list specified by task_state.
+ *
+ * Inputs:
+ *   tcb: Refers to a task in the ready-to-run list (normally
+ *     the task at the the head of the list).  It most be
+ *     stopped, its context saved and moved into one of the
+ *     waiting task lists.  It it was the task at the head
+ *     of the ready-to-run list, then a context to the new
+ *     ready to run task must be performed.
+ *   task_state: Specifies which waiting task list should be
+ *     hold the blocked task TCB.
+ *
+ ************************************************************/
+
+void up_block_task(_TCB *tcb, tstate_t task_state)
+{
+  /* Verify that the context switch can be performed */
+
+  if ((tcb->task_state < FIRST_READY_TO_RUN_STATE) ||
+      (tcb->task_state > LAST_READY_TO_RUN_STATE))
+    {
+      PANIC(OSERR_BADBLOCKSTATE);
+    }
+  else
+    {
+      _TCB *rtcb = (_TCB*)g_readytorun.head;
+      boolean switch_needed;
+
+      /* Remove the tcb task from the ready-to-run list.  If we
+       * are blocking the task at the head of the task list (the
+       * most likely case), then a context switch to the next
+       * ready-to-run task is needed. In this case, it should
+       * also be true that rtcb == tcb.
+       */
+
+      switch_needed = sched_removereadytorun(tcb);
+
+      /* Add the task to the specified blocked task list */
+
+      sched_addblocked(tcb, (tstate_t)task_state);
+
+      /* If there are any pending tasks, then add them to the g_readytorun
+       * task list now
+       */
+
+      if (g_pendingtasks.head)
+        {
+          switch_needed |= sched_mergepending();
+        }
+
+      /* Now, perform the context switch if one is needed */
+
+      if (switch_needed)
+        {
+          /* Are we in an interrupt handler? */
+
+          if (current_regs)
+            {
+              /* Yes, then we have to do things differently.
+               * Just copy the current_regs into the OLD rtcb.
+               */
+
+               up_copystate(rtcb->xcp.regs, current_regs);
+
+              /* Restore the exception context of the rtcb at the (new) head 
+               * of the g_readytorun task list.
+               */
+
+              rtcb = (_TCB*)g_readytorun.head;
+
+              /* Then switch contexts */
+
+              up_copystate(current_regs, rtcb->xcp.regs);
+            }
+
+          /* Copy the user C context into the TCB at the (old) head of the
+           * g_readytorun Task list. if up_saveusercontext returns a non-zero
+           * value, then this is really the previously running task restarting!
+           */
+
+          else if (!up_saveusercontext(rtcb->xcp.regs))
+            {
+              /* Restore the exception context of the rtcb at the (new) head 
+               * of the g_readytorun task list.
+               */
+
+              rtcb = (_TCB*)g_readytorun.head;
+
+              /* Then switch contexts */
+
+              up_fullcontextrestore(rtcb->xcp.regs);
+            }
+        }
+    }
+}

arch/arm/src/common/up_cache.S

@@ -0,0 +1,74 @@
+/********************************************************************
+ * common/up_cache.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/********************************************************************
+ * Definitions
+ ********************************************************************/
+
+#define CACHE_DLINESIZE    32
+
+/********************************************************************
+ * Assembly Macros
+ ********************************************************************/
+
+/**************************************************************************
+ * Name: up_flushicache
+ **************************************************************************/
+
+/* Esure coherency between the Icache and the Dcache in the region described 
+ * by r0=start and r1=end.
+ */
+	.globl	up_flushicache
+	.type	up_flushicache,%function
+up_flushicache:
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		/* Clean D entry */
+	mcr	p15, 0, r0, c7, c5, 1		/* Invalidate I entry */
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		/* Drain WB */
+	mov	pc, lr
+	.size	up_flushicache, .-up_flushicache
+	.end
+

arch/arm/src/common/up_copystate.c

@@ -0,0 +1,75 @@
+/************************************************************
+ * common/up_copystate.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_undefinedinsn
+ ************************************************************/
+
+/* A little faster than most memcpy's */
+
+void up_copystate(uint32 *dest, uint32 *src)
+{
+  int i;
+  for (i = 0; i < XCPTCONTEXT_REGS; i++)
+    {
+      *dest++ = *src++;
+    }
+}
+

arch/arm/src/common/up_createstack.c

@@ -0,0 +1,128 @@
+/************************************************************
+ * common/up_createstack.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/kmalloc.h>
+#include <nuttx/arch.h>
+#include "up_arch.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_create_stack
+ *
+ * Description:
+ *   Allocate a stack for a new thread and setup
+ *   up stack-related information in the TCB.
+ *
+ *   The following TCB fields must be initialized:
+ *   adj_stack_size: Stack size after adjustment for hardware,
+ *     processor, etc.  This value is retained only for debug
+ *     purposes.
+ *   stack_alloc_ptr: Pointer to allocated stack
+ *   adj_stack_ptr: Adjusted stack_alloc_ptr for HW.  The
+ *     initial value of the stack pointer.
+ *
+ * Inputs:
+ *   tcb: The TCB of new task
+ *   stack_size:  The requested stack size.  At least this much
+ *     must be allocated.
+ ************************************************************/
+
+STATUS up_create_stack(_TCB *tcb, size_t stack_size)
+{
+  if (tcb->stack_alloc_ptr &&
+      tcb->adj_stack_size != stack_size)
+    {
+      sched_free(tcb->stack_alloc_ptr);
+      tcb->stack_alloc_ptr = NULL;
+    }
+
+   if (!tcb->stack_alloc_ptr)
+     {
+       tcb->stack_alloc_ptr = (uint32 *)kzmalloc(stack_size);
+     }
+
+   if (tcb->stack_alloc_ptr)
+     {
+       size_t top_of_stack;
+       size_t size_of_stack;
+
+       /* The Arm7Tdmi uses a push-down stack:  the stack grows
+	* toward loweraddresses in memory.  The stack pointer
+	* register, points to the lowest, valid work address
+	* (the "top" of the stack).  Items on the stack are
+	* referenced as positive word offsets from sp.
+	*/
+
+       top_of_stack = (uint32)tcb->stack_alloc_ptr + stack_size - 4;
+
+       /* The Arm7Tdmi stack must be aligned at word (4 byte)
+	* boundaries. If necessary top_of_stack must be rounded
+	* down to the next boundary
+	*/
+
+       top_of_stack &= ~3;
+       size_of_stack = top_of_stack - (uint32)tcb->stack_alloc_ptr + 4;
+
+       /* Save the adjusted stack values in the _TCB */
+
+       tcb->adj_stack_ptr  = (uint32*)top_of_stack;
+       tcb->adj_stack_size = size_of_stack;
+
+       up_ledon(LED_STACKCREATED);
+       return OK;
+     }
+
+   return ERROR;
+}

arch/arm/src/common/up_dataabort.c

@@ -0,0 +1,81 @@
+/************************************************************
+ * common/up_dataabort.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/irq.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* Output debug info if stack dump is selected -- even if 
+ * debug is not selected.
+ */
+
+#ifdef CONFIG_ARCH_STACKDUMP
+# undef  lldbg
+# define lldbg lib_lowprintf
+#endif
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_dataabort
+ ************************************************************/
+
+void up_dataabort(uint32 *regs)
+{
+  lldbg("Data abort at 0x%x\n", regs[REG_PC]);
+  current_regs = regs;
+  PANIC(OSERR_ERREXCEPTION);
+}

arch/arm/src/common/up_doirq.c

@@ -0,0 +1,104 @@
+/************************************************************
+ * common/up_doirq.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+#include <assert.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+void up_doirq(int irq, uint32* regs)
+{
+  up_ledon(LED_INIRQ);
+#ifdef CONFIG_SUPPRESS_INTERRUPTS
+  PANIC(OSERR_ERREXCEPTION);
+#else
+  if ((unsigned)irq < NR_IRQS)
+    {
+       /* Current regs non-zero indicates that we are processing
+        * an interrupt; current_regs is also used to manage
+        * interrupt level context switches.
+        */
+
+       current_regs = regs;
+
+       /* Mask and acknowledge the interrupt */
+
+       up_maskack_irq(irq);
+
+       /* Deliver the IRQ */
+
+       irq_dispatch(irq, regs);
+
+       /* Indicate that we are no long in an interrupt handler */
+
+       current_regs = NULL;
+
+       /* Unmask the last interrupt (global interrupts are still
+        * disabled.
+        */
+
+       up_enable_irq(irq);
+    }
+  up_ledoff(LED_INIRQ);
+#endif
+}

arch/arm/src/common/up_exit.c

@@ -0,0 +1,173 @@
+/****************************************************************************
+ * common/up_exit.c
+ *
+ *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+#ifdef CONFIG_DUMP_ON_EXIT
+#include <nuttx/fs.h>
+#endif
+
+/****************************************************************************
+ * Private Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: _up_dumponexit
+ *
+ * Description:
+ *   Dump the state of all tasks whenever on task exits.  This is debug
+ *   instrumentation that was added to check file-related reference counting
+ *   but could be useful again sometime in the future.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+static void _up_dumponexit(FAR _TCB *tcb, FAR void *arg)
+{
+#if CONFIG_NFILE_DESCRIPTORS > 0 || CONFIG_NFILE_STREAMS > 0
+  int i;
+#endif
+
+  sdbg("  TCB=%p name=%s\n", tcb, tcb->argv[0]);
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+  if (tcb->filelist)
+    {
+      sdbg("    filelist refcount=%d\n",
+           tcb->filelist->fl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_DESCRIPTORS; i++)
+        {
+          struct inode *inode = tcb->filelist->fl_files[i].f_inode;
+          if (inode)
+            {
+              sdbg("      fd=%d refcount=%d\n",
+                   i, inode->i_crefs);
+            }
+        }
+    }
+#endif
+
+#if CONFIG_NFILE_STREAMS > 0
+  if (tcb->streams)
+    {
+      sdbg("    streamlist refcount=%d\n",
+           tcb->streams->sl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_STREAMS; i++)
+        {
+          struct file_struct *filep = &tcb->streams->sl_streams[i];
+          if (filep->fs_filedes >= 0)
+            {
+#if CONFIG_STDIO_BUFFER_SIZE > 0
+              sdbg("      fd=%d nbytes=%d\n",
+                   filep->fs_filedes,
+                  filep->fs_bufpos - filep->fs_bufstart);
+#else
+              sdbg("      fd=%d\n", filep->fs_filedes);
+#endif
+            }
+        }
+    }
+#endif
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: _exit
+ *
+ * Description:
+ *   This function causes the currently executing task to cease
+ *   to exist.  This is a special case of task_delete() where the task to
+ *   be deleted is the currently executing task.  It is more complex because
+ *   a context switch must be perform to the the next ready to run task.
+ *
+ ****************************************************************************/
+
+void _exit(int status)
+{
+  _TCB* tcb;
+
+  /* Disable interrupts.  They will be restored when the next
+   * task is started.
+   */
+
+  (void)irqsave();
+
+  slldbg("TCB=%p exitting\n", tcb);
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+  slldbg("Other tasks:\n");
+  sched_foreach(_up_dumponexit, NULL);
+#endif
+
+  /* Destroy the task at the head of the ready to run list. */
+
+  (void)task_deletecurrent();
+
+  /* Now, perform the context switch to the new ready-to-run task at the
+   * head of the list.
+   */
+
+  tcb = (_TCB*)g_readytorun.head;
+  slldbg("New Active Task TCB=%p\n", tcb);
+
+  /* Then switch contexts */
+
+  up_fullcontextrestore(tcb->xcp.regs);
+}
+

arch/arm/src/common/up_fullcontextrestore.S

@@ -0,0 +1,117 @@
+/**************************************************************************
+ * common/up_fullcontextrestore.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/irq.h>
+#include "up_internal.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_fullcontextrestore
+ **************************************************************************/
+
+	.globl	up_fullcontextrestore
+	.type	up_fullcontextrestore, function
+up_fullcontextrestore:
+
+	/* On entry, a1 (r0) holds address of the register save area */
+
+	/* Recover all registers except for r0, r1, R15, and CPSR */
+
+	add	r1, r0, #(4*REG_R2)	/* Offset to REG_R2 storage */
+	ldmia	r1, {r2-r14}		/* Recover registers */
+
+	/* Create a stack frame to hold the PC */
+
+	sub	sp, sp, #(3*4)		/* Frame for three registers */
+	ldr	r1, [r0, #(4*REG_R0)]	/* Fetch the stored r0 value */
+	str	r1, [sp]		/* Save it at the top of the stack */
+	ldr	r1, [r0, #(4*REG_R1)]	/* Fetch the stored r1 value */
+	str	r1, [sp, #4]		/* Save it in the stack */
+	ldr	r1, [r0, #(4*REG_PC)]	/* Fetch the stored pc value */
+	str	r1, [sp, #8]		/* Save it at the bottom of the frame */
+
+	/* Now we can restore the CPSR.  We wait until we are completely
+	 * finished with the context save data to do this. Restore the CPSR
+	 * may re-enable and interrupts and we couldt be in a context
+	 * where save structure is only protected by interrupts being disabled.
+         */
+
+	ldr	r1, [r0, #(4*REG_CPSR)]	/* Fetch the stored CPSR value */
+	msr	cpsr, r1		/* Set the CPSR */
+
+	/* Now recover r0 and r1 */
+
+	ldr	r0, [sp]
+	ldr	r1, [sp, #4]
+	add	sp, sp, #(2*4)
+
+	/* Then return to the address at the stop of the stack,
+	 * destroying the stack frame
+	 */
+
+	ldr	pc, [sp], #4
+	.size up_fullcontextrestore, . - up_fullcontextrestore
+

arch/arm/src/common/up_head.S

@@ -0,0 +1,324 @@
+/********************************************************************
+ * common/up_head.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/**************************************************************************
+ * Conditional Compilation
+ **************************************************************************/
+
+#undef ALIGNMENT_TRAP
+#undef CPU_DCACHE_WRITETHROUGH
+#undef CPU_CACHE_ROUND_ROBIN
+#undef CPU_DCACHE_DISABLE
+#undef CPU_ICACHE_DISABLE
+
+/********************************************************************
+ * Definitions
+ ********************************************************************/
+
+/* The physical address of the beginning of SDRAM is provided by
+ * CONFIG_DRAM_START.  The size of installed SDRAM is provided by
+ * CONFIG_DRAM_SIZE.  The virtual address of SDRAM is provided by
+ * CONFIG_DRAM_VSTART.
+ */
+
+#define NSDRAM_SECTIONS (CONFIG_DRAM_SIZE >> 20)
+
+/********************************************************************
+ * Assembly Macros
+ ********************************************************************/
+
+/* Since the page table is closely related to the NuttX base
+ * address, we can convert the page table base address to the
+ * base address of the section containing both.
+ */
+
+	.macro	mksection, section, pgtable
+	bic	\section, \pgtable, #0x000ff000
+	.endm
+
+/* This macro will modify r0, r1, r2 and r14 */
+
+#ifdef CONFIG_DEBUG
+	.macro	showprogress, code
+	mov	r0, #\code
+	bl	up_lowputc
+	.endm
+#else
+	.macro	showprogress, code
+	.endm
+#endif
+
+/********************************************************************
+ * Name: __start
+ ********************************************************************/
+
+/* We assume the bootloader has already initialized most of the h/w for
+ * us and that only leaves us having to do some os specific things
+ * below.
+ */
+	.text
+        .global __start
+	.type	__start, #function
+__start:
+	/* Make sure that we are in SVC mode with all IRQs disabled */
+
+	mov	r0, #(SVC_MODE | PSR_I_BIT | PSR_F_BIT)
+	msr	cpsr_c, r0
+
+	/* Clear the 16K level 1 page table */
+
+	ldr	r4, .LCppgtable		/* r4=phys. page table */
+	mov	r0, r4
+	mov	r1, #0
+	add	r2, r0, #PGTABLE_SIZE
+.Lpgtableclear:
+	str	r1, [r0], #4
+	str	r1, [r0], #4
+	str	r1, [r0], #4
+	str	r1, [r0], #4
+	teq	r0, r2
+	bne	.Lpgtableclear
+
+	/* Create identity mapping for first MB section to support
+	 * this startup logic executing out of the physical address
+	 * space.  This identity mapping will be removed by .Lvstart
+	 * (see below).
+	 */
+
+	mksection r0, r4			/* r0=phys. base section */
+	ldr	r1, .LCmmuflags		/* FLGS=MMU_MEMFLAGS */
+	add	r3, r1, r0		/* r3=flags + base */
+	str	r3, [r4, r0, lsr #18]	/* identity mapping */
+
+	/* Create a "normal" single section mapping for the first
+	 * MB of memory.  Now, we have the first 1MB mapping to
+	 * both phyical and virtual addresses.  The reset of the
+	 * SDRAM mapping will be completed in .Lvstart once we have
+	 * moved the physical mapping out of the way.
+	 */
+
+	ldr	r2, .LCvpgtable		/* r2=virt. page table */
+	mksection r0, r2			/* r0=virt. base section */
+	str	r3, [r4, r0, lsr #18]	/* identity mapping */
+
+	/* The following logic will set up the ARM926 for normal operation */
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		/* Invalidate I,D caches */
+	mcr	p15, 0, r0, c7, c10, 4	/* Drain write buffer */
+	mcr	p15, 0, r0, c8, c7		/* Invalidate I,D TLBs */
+	mcr	p15, 0, r4, c2, c0		/* Load page table pointer */
+
+#ifdef CPU_DCACHE_WRITETHROUGH
+	mov	r0, #4			/* Disable write-back on caches explicitly */
+	mcr	p15, 7, r0, c15, c0, 0
+#endif 
+
+	/* Enable the MMU and caches
+	 * lr = Resume at .Lvstart with the MMU enabled
+	 */
+
+	ldr	lr, .LCvstart			/* Abs. virtual address */
+
+	mov	r0, #0x1f			/* Domains 0, 1 = client */
+	mcr	p15, 0, r0, c3, c0		/* Load domain access register */
+	mrc	p15, 0, r0, c1, c0		/* Get control register */
+	
+	/* Clear bits (see start.h) */
+
+	bic	r0, r0, #(CR_R|CR_F|CR_Z)
+	bic	r0, r0, #(CR_A|CR_C|CR_W)
+	bic	r0, r0, #(CR_I)
+
+	/* Set bits (see start.h) */
+
+	orr	r0, r0, #(CR_M|CR_P|CR_D)
+	orr	r0, r0, #(CR_S|CR_V)
+
+#ifdef CPU_CACHE_ROUND_ROBIN
+	orr	r0, r0, #(CR_RR)
+#endif
+#ifndef CPU_DCACHE_DISABLE
+	orr	r0, r0, #(CR_C)
+#endif
+#ifndef CPU_ICACHE_DISABLE
+	orr	r0, r0, #(CR_I)
+#endif
+#ifdef ALIGNMENT_TRAP
+	orr	r0, r0, #(CR_A)
+#endif
+	mcr	p15, 0, r0, c1, c0, 0		/* write control reg */
+
+	/* Get TMP=2 Processor ID register */
+
+	mrc	p15, 0, r1, c0, c0, 0		/* read id reg */
+	mov	r1, r1
+	mov	r1, r1
+
+	mov	pc, lr
+
+/**************************************************************************
+ * PC_Relative Data
+ **************************************************************************/
+
+	/* These addresses are all virtual address */
+	
+	.type	.LCvstart, %object
+.LCvstart:
+	.long	.Lvstart
+	.type	.LCmmuflags, %object
+.LCmmuflags:
+	.long	MMU_MEMFLAGS
+	.type	.LCppagetable, %object
+.LCppgtable:
+	.long	CONFIG_DRAM_START  /* Physical start of DRAM */
+	.type	.LCvpagetable, %object
+.LCvpgtable:
+	.long	CONFIG_DRAM_VSTART /* Virtual start of DRAM */
+	.size	_start, .-_start
+
+/**************************************************************************
+ * Name: .Lvstart
+ **************************************************************************/
+
+/* The following is executed after the MMU has been enabled. This uses
+ * absolute addresses; this is not position independent.
+ */
+	.align	5
+	.local	.Lvstart
+	.type	.Lvstart, %function
+.Lvstart:
+
+	/* Remove the temporary null mapping */
+
+	ldr	r4, .LCvpgtable		/* r4=virtual page table */
+	ldr	r1, .LCppgtable		/* r1=phys. page table */
+	mksection r3, r1			/* r2=phys. base addr */
+	mov	r0, #0			/* flags + base = 0 */
+	str	r0, [r4, r3, lsr #18]	/* Undo identity mapping */
+
+	/* Now setup the pagetables for our normal SDRAM mappings
+	 * mapped region.  We round NUTTX_START_VADDR down to the
+	 * nearest megabyte boundary.
+	 */
+
+	ldr	r1, .LCmmuflags		/* FLGS=MMU_MEMFLAGS */
+	add	r3, r3, r1		/* r3=flags + base */
+
+	add	r0, r4, #(NUTTX_START_VADDR & 0xff000000) >> 18
+	bic	r2, r3, #0x00f00000
+	str	r2, [r0]
+
+	add	r0, r0, #(NUTTX_START_VADDR & 0x00f00000) >> 18
+	str	r3, [r0], #4
+
+	/* Now map the remaining NSDRAM_SECTIONS-1 SDRAM sections */
+
+	.rept	NSDRAM_SECTIONS-1
+	add	r3, r3, #SECTION_SIZE
+	str	r3, [r0], #4
+	.endr
+
+	/* Zero BSS and set up the stack pointer */
+
+	adr	r0, .Linitparms
+	ldmia	r0, {r0, r1, sp}
+
+	/* Clear the frame pointer and .bss */
+
+	mov     fp, #0
+
+.Lbssinit:	
+	cmp     r0, r1		       /* Clear up to _bss_end_ */
+	strcc	fp, [r0],#4
+	bcc	.Lbssinit
+
+	/* Perform early C-level initialization */
+
+	bl	up_boot
+
+	/* Set up the LEDs */
+
+#ifdef CONFIG_ARCH_LEDS
+	bl	up_ledinit
+#endif
+	/* Perform early serial initialization */
+
+#if defined(CONFIG_DEV_CONSOLE) && CONFIG_NFILE_DESCRIPTORS > 0
+	bl      up_earlyserialinit
+#endif
+
+	/* Finally branch to the OS entry point */
+
+	mov	lr, #0
+	b	os_start
+
+	/* Variables:
+	 * _sbss is the start of the BSS region (see ld.script)
+	 * _ebss is the end of the BSS regsion (see ld.script)
+	 * The idle task stack starts at the end of BSS and is
+	 * of size CONFIG_PROC_STACK_SIZE.  The heap continues
+	 * from there until the end of memory.  See g_heapbase
+	 * below.
+	 */
+
+.Linitparms:
+	.long	_sbss
+	.long	_ebss
+	.long	_ebss+CONFIG_PROC_STACK_SIZE-4
+	.size	.Lvstart, .-.Lvstart
+
+	/* This global variable is unsigned long g_heapbase and is
+	 * exported from here only because of its coupling to .Linitparms
+	 * above.
+	 */
+
+	.data
+	.align	4
+	.globl	g_heapbase
+	.type	g_heapbase, object
+g_heapbase:
+	.long	_ebss+CONFIG_PROC_STACK_SIZE
+	.size	g_heapbase, .-g_heapbase
+	.end
+

arch/arm/src/common/up_idle.c

@@ -0,0 +1,87 @@
+/************************************************************
+ * common/up_idle.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/arch.h>
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_idle
+ *
+ * Description:
+ *   up_idle() is the logic that will be executed when their
+ *   is no other ready-to-run task.  This is processor idle
+ *   time and will continue until some interrupt occurs to
+ *   cause a context switch from the idle task.
+ *
+ *   Processing in this state may be processor-specific. e.g.,
+ *   this is where power management operations might be
+ *   performed.
+ *
+ ************************************************************/
+
+void up_idle(void)
+{
+#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* If the system is idle and there are no timer interrupts,
+   * then process "fake" timer interrupts. Hopefully, something
+   * will wake up.
+   */
+
+  sched_process_timer();
+#endif
+}
+

arch/arm/src/common/up_initialize.c

@@ -0,0 +1,144 @@
+/****************************************************************************
+ * common/up_initialize.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include <nuttx/fs.h>
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Define to enable timing loop calibration */
+
+#undef CONFIG_ARM_CALIBRATION
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_calibratedelay
+ *
+ * Description:
+ *   Delay loops are provided for short timing loops.  This function, if
+ *   enabled, will just wait for 100 seconds.  Using a stopwatch, you can
+ *   can then determine if the timing loops are properly calibrated.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_ARM_CALIBRATION) & defined(CONFIG_DEBUG)
+static void up_calibratedelay(void)
+{
+  int i;
+  slldbg("Beginning 100s delay\n");
+  for (i = 0; i < 100; i++)
+    {
+      up_mdelay(1000);
+    }
+  slldbg("End 100s delay\n");
+}
+#else
+# define up_calibratedelay()
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_initialize
+ *
+ * Description:
+ *   up_initialize will be called once during OS initialization after the
+ *   basic OS services have been initialized.  The architecture specific
+ *   details of initializing the OS will be handled here.  Such things as
+ *   setting up interrupt service routines, starting the clock, and
+ *   registering device drivers are some of the things that are different
+ *   for each processor and hardware platform.
+ *
+ *   up_initialize is called after the OS initialized but before the user
+ *   initialization logic has been started and before the libraries have
+ *   been initialized.  OS services and driver services are available.
+ *
+ ****************************************************************************/
+
+void up_initialize(void)
+{
+  /* Initialize global variables */
+
+  current_regs = NULL;
+
+  /* Calibrate the timing loop */
+
+  up_calibratedelay();
+
+  /* Initialize the interrupt subsystem */
+
+  up_irqinitialize();
+
+  /* Initialize the system timer interrupt */
+
+#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  up_timerinit();
+#endif
+
+  /* Register devices */
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+  devnull_register();   /* Standard /dev/null */
+#endif
+
+  /* Initialize the serial device driver */
+
+  up_serialinit();
+
+  /* Initialize the netwok */
+
+  up_netinitialize();
+  up_ledon(LED_IRQSENABLED);
+}