Commit Graph

31997 Commits

Author SHA1 Message Date
Daniel Agar c6825aa177 invensense/icm20689 driver minor improvements
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
 - check FIFO count as part of full transfer and reset or adjust timing if necessary
2020-03-25 01:05:38 -04:00
Daniel Agar f5fe50f839 invensense/icm20608g driver minor improvements
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
 - check FIFO count as part of full transfer and reset or adjust timing if necessary
 - rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G
2020-03-25 01:05:38 -04:00
Daniel Agar c4fbea32c1 invensense/icm20602 driver minor improvements
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
2020-03-25 01:05:38 -04:00
JaeyoungLim e2d2ae29a9 Add sonoma raceway world 2020-03-24 19:32:12 +00:00
TSC21 c4f8f39ca9 microRTPS: templates: use full version comparison when checking for version 1.7 2020-03-24 17:47:39 +00:00
TSC21 1b453ed849 microRTPS: templates: check only the major and minor of FastRTPS to set the 'discovery_config' namespace 2020-03-24 16:43:12 +00:00
Daniel Agar a13e8e573e boards: fmu-v2/v3 rc.board_sensors remove obsolete hmc5883 argument
- try to keep fmu-v2/v3 mostly in sync
2020-03-24 09:46:20 -04:00
Beat Küng 81dc73b752 fmu-v5_optimized: disable bl_update
to reduce FLASH usage
2020-03-24 09:46:20 -04:00
Beat Küng 7ea8dff8db spi: do not deselect other chip-selects
And make sure on reset & init everything is deselected.

Reduces CPU load on a pixhawk cube by almost 1%.
2020-03-24 09:46:20 -04:00
Beat Küng 1612f4c2ed SPI: disable SPI locking where possible
It's not possible for buses that run both NuttX and PX4 drivers, e.g.
Pixracer.

Reduces CPU load:
- v5x: 2.5%
- v3 (pixhawk cube): 4.4%
2020-03-24 09:46:20 -04:00
Beat Küng 6a41c9e417 refactor fxos8701cq: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 5fa4cd1019 refactor fxas21002c: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 6fd027c4dd refactor icm40609d: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 6e9bc50bec refactor icm42688p: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 974cb30b6d nxp_rddrone-uavcan146 ignore i2c for now (platform support is incomplete) 2020-03-24 09:46:20 -04:00
Daniel Agar 532ccd18ad refactor qmc5883: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h
chip-selects are deselected in stm32_spiinitialize()
2020-03-24 09:46:20 -04:00
Beat Küng f4ab1b8a78 fix px4moduledoc: typo in 'External I2C bus(es)' 2020-03-24 09:46:20 -04:00
Beat Küng 2ca49cc718 differential_pressure drivers: add module subcategory documentation 2020-03-24 09:46:20 -04:00
Beat Küng f74474dd55 fmuk66-v3: fix spi bus numbering passing to px4_spibus_initialize
Fixes an error on bootup ([boot] FAILED to initialize SPI port 0). Other
than that, everything was working.
2020-03-24 09:46:20 -04:00
Beat Küng 04cffce992 refactor aerofc_adc: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 842f656143 mtd.cpp: remove use of PX4_I2C_BUS_ONBOARD 2020-03-24 09:46:20 -04:00
Beat Küng ee49e500e7 refactor ist8308: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 030ba24f53 refactor pca9685: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 6588dd0861 refactor icm20948: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 924f46ee28 refactor icm20608g: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng c4a19c8852 refactor icm20689: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 1df0fe03d7 refactor mpu6000: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 571451942d refactor mpu9250: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 609eafd4cd refactor l3gd20: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 6cf4de9e02 refactor lsm303d: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 3423809cd9 refactor ism330dlc: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 2d6a9ae1fb lsm9ds1: cleanup + consistency with other drivers 2020-03-24 09:46:20 -04:00
Beat Küng 00280d55c2 refactor rm3100: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 2fa289bbad lsm9ds1_mag: cleanup + consistency with other drivers 2020-03-24 09:46:20 -04:00
Beat Küng 74db018012 refactor lsm303agr: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 4d511868e6 refactor lis3mdl: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 785f18ebf8 refactor bmi160: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 54da4997ad refactor bmi088: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng aad6fe6f03 refactor bma180: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 17761acd49 refactor adis16497: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 1f152d7d43 refactor adis16477: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng d15fa82841 refactor adis16448: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 7626be0485 refactor mpu9250: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 6ad5357d1a SPI+I2C: remove unused defines and printf's 2020-03-24 09:46:20 -04:00
Beat Küng 2f3174abb0 refactor icm20602: use driver base class 2020-03-24 09:46:20 -04:00
TSC21 975227c52a Tools: setup: add 'packaging' to the requirements list 2020-03-24 13:31:41 +00:00
Matthias Grob 6570e1fe40 appveyor: switch to Cygwin toolchain v0.9
to have packaging python 3 package.
See https://github.com/PX4/windows-toolchain/releases/tag/v0.9
2020-03-24 13:31:41 +00:00
TSC21 6598ce5a46 CI: bump container tags to 2020-03-16 2020-03-24 13:31:41 +00:00
TSC21 1ea5280299 microRTPS: use package.version to compare FastRTPS lib versions 2020-03-24 13:31:41 +00:00