Commit Graph

23855 Commits

Author SHA1 Message Date
David Sidrane 58a9bf0b2e sd_bench:Add verify and keep options 2021-11-25 13:11:45 -05:00
Thomas Stastny 8defbc8829 update correct airsp scale param string in ekf2 2021-11-25 11:01:04 -05:00
Matthias Grob c5fb68b7a1 Commander: force disabling the arm stick gesture when arm switch is in use 2021-11-25 07:56:35 +01:00
David Sidrane e76dda545c hardfault_log:Fix formatting 2021-11-24 15:00:38 -05:00
Sander Swart 462b572172 Fixed mavlink_ftp read
Instead of always reading the max data length, it now properly respects the requested amount of bytes (as per documentation)
2021-11-24 17:51:29 +01:00
Matthias Grob ea3b99e964 navigator: Remove deprecated RangeRTL unit tests 2021-11-24 14:10:24 +01:00
Matthias Grob c522a8b15a Compute RTL time and react if lower than flight time
- Compute RTL time also during RTL
- Calculate correct altitude when finding destination
2021-11-24 14:10:24 +01:00
Matthias Grob 5489005e0b Commander: call battery_status_check on update instead of early return 2021-11-24 14:10:24 +01:00
Jukka Laitinen 5dbbddb13f EKF2: Use _distance_sensor_subs vector directly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2021-11-24 09:11:45 +01:00
Jukka Laitinen d9498ade32 EKF2: Allocate distance sensor subscriptions as member variables
Just create the subscriptions and keep them, instead of
re-creating them continuously

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2021-11-24 09:11:45 +01:00
Beat Küng 312d84ca23 metadata: run json schema validation for actuators + parameter metadata 2021-11-23 12:40:22 -05:00
Beat Küng 2809dd8944 control_allocator: remove min/max/scale params 2021-11-23 12:40:22 -05:00
Beat Küng b29d9db7f1 control_allocator: limit status publication rate to 200Hz
Reduces CPU load by ~3.5% on F4 @2khz.
And compute getAllocatedControl as needed (~1.5% CPU reduction)
2021-11-23 12:40:22 -05:00
Beat Küng 93a54ee63d metadata: fix generic param metadata generation
Adds the module.yaml params that was previously split into a separate file.
2021-11-23 12:40:22 -05:00
Beat Küng bcba3dfe52 control_allocator,angular_velocity_controller: run on rate_ctrl wq 2021-11-23 12:40:22 -05:00
Beat Küng a0e43bca96 msg: remove unused vehicle_actuator_setpoint topic 2021-11-23 12:40:22 -05:00
Beat Küng 52a2ef34fd mixer_module: add THR_MDL_FAC for SYS_CTRL_ALLOC=1 2021-11-23 12:40:22 -05:00
Beat Küng 357a16aca6 pwm_out_sim: split module.yaml into HIL+SIM files 2021-11-23 12:40:22 -05:00
Beat Küng b94c5db55d component_information: add actuators json generation & CI deployment 2021-11-23 12:40:22 -05:00
Beat Küng 70b1b19902 uavcan: add configuration parameter to actuator metadata 2021-11-23 12:40:22 -05:00
Beat Küng 19b89e1d35 output_functions: add notes to camera trigger + capture & exclude from testing 2021-11-23 12:40:22 -05:00
Beat Küng 4346ac4a37 control_allocator: add mixer metadata 2021-11-23 12:40:22 -05:00
Beat Küng 282d35bbf0 esc_calibration: handle SYS_CTRL_ALLOC==1 2021-11-23 12:40:22 -05:00
Beat Küng 490a2cd7ae dshot: handle VEHICLE_CMD_CONFIGURE_ACTUATOR 2021-11-23 12:40:22 -05:00
Beat Küng 21699935e8 vehicle_command: add VEHICLE_CMD_ACTUATOR_TEST and VEHICLE_CMD_CONFIGURE_ACTUATOR 2021-11-23 12:40:22 -05:00
Beat Küng 6fdcc43ea8 mixer_module: add testing for SYS_CTRL_ALLOC=1 with actuator_test cmd+uorb msg 2021-11-23 12:40:22 -05:00
Beat Küng 36d9635518 output_functions.yaml: allow single-instance entry with 'start' but no 'count'
for other additional data
2021-11-23 12:40:22 -05:00
Beat Küng 5d6e785a4b mixer_module: remove unneeded test_motor_s force init 2021-11-23 12:40:22 -05:00
Beat Küng f99c2617ad control_allocator: add module.yaml, add CA_MC_R_COUNT param & update defaults 2021-11-23 12:40:22 -05:00
Beat Küng 2ff6baa250 actuator params: use module_name as prefix to channel label 2021-11-23 12:40:22 -05:00
Matthias Grob 0153c870d2 Commander: make sure yaw airmode is not possible while arm gesture is enabled
It's unsafe to arm with the gesture when yaw airmode is enabled
because e.g. in Stabilized mode that results in a high yawrate setpoint
that the drone tries to follow even with zero thrust
because of the airmode.

It was handled before by checking the arm switch parameter because that
used to disable the stick arm gesture.
See 24dc316973
2021-11-23 16:03:46 +01:00
Matthias Grob 572890f8c0 ManualControl: add parameter to disable arm/disarm stick gesture 2021-11-23 16:03:46 +01:00
Matthias Grob 468022abba ManualControl: correct arm hysteresis parameter name 2021-11-23 16:03:46 +01:00
Matthias Grob c84b1c6566 ManualControl: ignore unassigned mode slots
They were resulting in a message
"Switching to Unkown is currently not available".
2021-11-23 16:03:46 +01:00
Silvan Fuhrer e596607e2e minor comments update
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-11-23 14:48:51 +01:00
Daniel Agar 7ff72304b4 sensors/vehicle_imu: improve disabled sensor handling
- remove regular callback scheduling when sensor is disabled, register if re-enabled
2021-11-22 21:10:35 -05:00
Daniel Agar 1c6b1f7554 pwm_out: parameter failure error messages 2021-11-22 11:27:45 -05:00
Daniel Agar 577d926639 commander: improve angular velocity validity and message 2021-11-22 11:27:45 -05:00
PX4 BuildBot 88d9ade4d7 Update submodule mavlink to latest Mon Nov 22 12:39:21 UTC 2021
- mavlink in PX4/Firmware (0e4e8162407a12dc09c8d17635c60d4036b81bc7): https://github.com/mavlink/mavlink/commit/c3a4b52eb1ac6e8053d64a6a8b6ade887d4fa2d2
    - mavlink current upstream: https://github.com/mavlink/mavlink/commit/5309ba449a3dc6d7ad84fa7ebeb6deee040e4a04
    - Changes: https://github.com/mavlink/mavlink/compare/c3a4b52eb1ac6e8053d64a6a8b6ade887d4fa2d2...5309ba449a3dc6d7ad84fa7ebeb6deee040e4a04

    5309ba44 2021-11-18 Hamish Willee - Remove backticks - these do not render as a style so not helpful (#1745)
9cac0e5a 2021-11-17 David Jablonski - docs: catch more hyperlinks (#1744)
ea9349b5 2021-11-16 David Jablonski - common: add SET_FOCUS_TYPE_AUTO (#1741)
2021-11-22 09:08:50 -05:00
Daniel Agar 8fc3b05491 mavlink: param_get proper type to silence errors 2021-11-22 09:08:38 -05:00
Daniel Agar cbb743c64d parameters: param type checking use PX4_ERR and enable in PX4_SITL 2021-11-22 09:08:25 -05:00
Igor Mišić c73028bb1b iridiumsbd: discard all pending data for flow control enabled 2021-11-22 11:46:15 +01:00
wangwwno1 7a1a4ea7a6 Format fix & Remove redundant lines 2021-11-20 16:13:46 +01:00
wangwwno1 51ce8306ee Remove redundant code out of hil_lpos 2021-11-20 16:13:46 +01:00
wangwwno1 b2c5919d29 Update src/modules/simulator/simulator_mavlink.cpp
Co-authored-by: JaeyoungLim <jalim@ethz.ch>
2021-11-20 16:13:46 +01:00
wangwwno1 160fec5f25 Update simulator_mavlink.cpp 2021-11-20 16:13:46 +01:00
wangwwno1 6e2060ddb6 Add accel to vehicle_local_position_groundtruth
Related Issue: #18527 
According to [this doc](https://github.com/mavlink/c_library_v2/blob/92b1a43468e8737da2d4cc1e72304e6443dcfdd3/common/mavlink_msg_hil_state_quaternion.h#L102), the *acc value are mili-Gee, so multiply the value with `CONSTANT_ONE_G/1000.0f` would get the acceleration in `m/s`.
2021-11-20 16:13:46 +01:00
Daniel Agar 505f963dd0 mavlink: receiver fix SENS_FLOW_ROT type 2021-11-19 21:08:04 -05:00
Matthias Grob f912ee2c8b Commander: send out parachute MAVLink command when kill switch engaged 2021-11-19 17:15:04 +01:00
Matthias Grob 3193b554ca Add optional preflight check for healthy MAVLink parachute system 2021-11-19 17:15:04 +01:00