Xiang Xiao 159b88c871 include/limits.h and include/sys/types.h: Fix warning about 'SIZE_MAX' redefined. include/nuttx/usb/audio.h: Fix warnings due to '-' used whete '_' intended.

2018-08-28 06:41:57 -06:00

..

1wire

…

analog

drivers/analog: Add driver for digital to analog converted DAC7571.

2018-08-02 06:40:48 -06:00

audio

audio/audio_comp.c: Add the composite audio driver

2018-08-27 09:03:09 -06:00

binfmt

binfmt/: Mostly cosmetic changes from review of a previous commit.

2018-08-24 06:10:50 -06:00

can

arch/arm/src/samv7: Add ability for CAN BUS_OFF autorecovery according ISO11898-1:2015. With this change we added an ioctl for triggering the autorecovery sequence for BUS_OFF to the CAN-driver and the SAMV7 low-level driver. According the datasheet: If the device goes Bus_Off, it will set MCAN_CCCR.INIT of its own accord, stopping all bus activities. Once MCAN_CCCR.INIT has been cleared by the processor (application), the device will then wait for 129 occurrences of Bus Idle (129 * 11 consecutive recessive bits) before resuming normal operation. At the end of the Bus_Off recovery sequence, the Error Management Counters will be reset. During the waiting time after the resetting of MCAN_CCCR.INIT, each time a sequence of 11 recessive bits has been monitored, a Bit0 Error code is written to MCAN_PSR.LEC, enabling the processor to readily check up whether the CAN bus is stuck at dominant or continuously disturbed and to monitor the Bus_Off recovery sequence. MCAN_ECR.REC is used to count these sequences.

2018-07-04 07:48:59 -06:00

contactless

…

crypto

…

drivers

…

eeprom

…

fs

nclude/nuttx/fs/binfs.h: Fix warning: Type defaults to 'int' in declaration of 'mountpt_operations'

2018-08-27 05:50:52 -06:00

i2c

include/nuttx/i2c/i2c_master.h: Add the standard speed macros.

2018-08-27 06:02:13 -06:00

input

…

ioexpander

Squashed commit of the following:

2018-08-27 09:25:11 -06:00

lcd

Remove trailing spaces at the end of lines.

2018-08-13 07:39:38 -06:00

leds

Squashed commit of the following:

2018-07-22 15:13:39 -06:00

lib

include/nuttx/lib/modlib.h: Eliminate warning: 'CONFIG_MODLIB_MAXDEPEND' is not defined'

2018-08-27 11:39:52 -06:00

mm

mm/: add mm_heapmember function and reimplement kmm_heapmember base on mm_heapmember since this function is very useful if multiple heaps exist.

2018-08-23 09:38:49 -06:00

modem

…

mtd

drivers/mtd: Add gd25 driver

2018-08-28 06:31:54 -06:00

net

net/usrsock: Add the listen/accept/getpeername/ioctl support

2018-08-26 15:15:48 -06:00

nx

…

power

drivers/pm: PM: Add PM_RESTORE to notify driver that device exit WFI so the driver could restore state. For example, WDT may stop counting before enter low power state and restore the counting agian in PM_RESTORE notification

2018-08-27 13:26:33 -06:00

sensors

drivers/sensors and configs/nucleo-l476g: Add support for LSM303AGR and LSM6DSL sensors

2018-08-25 08:19:31 -06:00

serial

Squashed commit of the following:

2018-08-26 11:37:16 -06:00

spi

include/nuttx/spi/spi.h: Add a definition for a USBHOST SPI device. drivers/usbhost/usbhost_max3421e.c: Review and correct SPI locking usage.

2018-07-04 08:55:43 -06:00

syslog

syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic.

2018-06-07 16:29:16 -06:00

timers

Squashed commit of the following:

2018-08-27 11:55:30 -06:00

usb

include/limits.h and include/sys/types.h: Fix warning about 'SIZE_MAX' redefined. include/nuttx/usb/audio.h: Fix warnings due to '-' used whete '_' intended.

2018-08-28 06:41:57 -06:00

video

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

wireless

Add missing function names in function headers.

2018-08-13 15:53:15 -06:00

.gitignore

…

addrenv.h

…

arch.h

Rename CONFIG_ARCH_HAVE_TRIGGER_HOOK to CONFIG_ARCH_HAVE_IRQTRIGGER

2018-08-25 09:10:30 -06:00

ascii.h

…

board.h

…

cancelpt.h

…

clock.h

Move clock_timespec_[add|subtract] to include/nuttx/clock.h

2018-08-27 06:04:04 -06:00

compiler.h

include/nuttx/compiler.h: fix warning: __cplusplus is not defined. Some gcc derived compiler do not define __cplusplus

2018-08-27 05:53:16 -06:00

environ.h

fs/proc and sched/environ: Add support for a procfs entry that will permit examining the environment of any task.

2018-08-10 10:16:39 -06:00

init.h

…

irq.h

sched/irq: Add support interrupt chains in NuttX. IRQ chain is very useful in these cases: (1) Multiple hardware connect to the same request line(e.g. PCI), (2) Need multiple driver to support one hardware block (like Linux MFD)

2018-08-24 15:10:23 -06:00

kmalloc.h

include/nuttx/kmalloc.h: Add {kumm/kmm}_calloc API. Add calloc API for manage user memory and kernel memory in Flat Build/Kernel Build without kernel heap.

2018-08-27 05:55:09 -06:00

kthread.h

Update some comments. Remove references to non-existent CONFIG_MAX_TASK_ARG.

2018-08-08 17:06:46 -06:00

mmcsd.h

…

module.h

…

mqueue.h

…

mutex.h

include/nuttx/mutex.h: Add inline wrapper functions to more clearly support semaphores when used as mutexs.

2018-08-27 06:26:11 -06:00

nuttx.h

Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE

2018-08-27 07:06:57 -06:00

page.h

…

pgalloc.h

…

poff.h

…

progmem.h

…

pthread.h

pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator.

2018-08-23 09:49:20 -06:00

random.h

…

sched_note.h

…

sched.h

Squashed commit of the following:

2018-08-27 11:40:09 -06:00

scsi.h

…

sdio.h

drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations.

2018-08-05 17:58:17 -06:00

semaphore.h

nclude/nuttx/semaphore: apply the semaphore wait function nxsem_wait_uninterruptible(). The function nxsem_wait_uninterruptible() is a wrapped version of nxsem_wait(), which is uninterruptible and convenient for use.

2018-08-27 06:07:50 -06:00

signal.h

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

spawn.h

…

spinlock.h

…

streams.h

…

symtab.h

…

time.h

…

tls.h

…

tree.h

…

userspace.h

…

vt100.h

…

wdog.h

…

wqueue.h

sched/wqueue, libs/libc/wqueue, configs: Remove work queue polling delay to simplify the code logic and save the power.

2018-08-25 14:58:07 -06:00

zoneinfo.h

…