After `CONFIG_STACK_USAGE` enabled, no "*.su" file was generated, tools/showstack.sh output nothing.
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
On rt10xx chips the MPU didn't got reset, which is needed for use
with bootloaders. Furthermore the TCM sizes where fixed now we use
kconfig symbol to set the size respectively. Also we mark ITCM as
RO/RO so we can't change data we executed from.
The up_saveusercontext function leverages USER_SAVE macro,
which is ordinarily used as a first half of the context switch.
This macro is therefore unsuitable to be used standalone,
it pops return address from the stack and does not return.
This patch adds missing instructions to do what would otherwise
be done by the second half of the context switch.
Tested by compiling and verifying the disassembly - the function
no longer falls through to the next function in the program memory,
push/pop instructions are balanced and stack contents preserved
Signed-off-by: Kerogit <kr.git@kerogit.eu>
During initial development of AVR DA/DB support, the board LED code
and constants it uses were based on different AVR boards. The resulting
code therefore did not work for most indicated states.
This patch fixes LED status codes to match what the board LED code
expects. Tested by manually triggering reset_board function which
caused the board LED to blink (whereas it was not blinking before
the fix.)
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This commit changed the type of the delay ticks to the unsigned, which can reduce the useless branch conditions
Besides, this commit added max delay tick limitation to fix incorrect timing behavior if we delay SCLOCK_MAX in the SMP build.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
esp32 based boards will now be able to use GC9A01 LCD driver for LVGL.
- Enabling CONFIG_LCD_GC9A01 will now flip spi_cmddata pin
- Added esp32_gc9a01.c file.
Signed-off-by: Aung Khant Maw <aungkhantmaw64@gmail.com>
Allow users to operate poll in the kernel using the file_poll
approach, as file is protected with reference counting,
making it more secure.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This enables the use of the cryptographic accelerator within
the ESP32. The support algorithms are: SHA1, SHA256, SHA384
and SHA512.
Signed-off-by: Vlad Pruteanu <pruteanuvlad1611@yahoo.com>
This modification ensures that inoderemove will error instead of
trying to remove an inode without parent.
This fix was implement by Richard Jiayang Liu.
Signed-off-by: Richard Jiayang Liu <rjliu3@illinois.edu>
Migrated teensy 2.0 README.txt to RST format. Moved common tool-chain
information to the chip page and provided back-link.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This implements an interrupt-based SPI driver for the BCM2711 SPI
interfaces (excluding auxiliary SPI interfaces). Only tested on SPI0
since proprietary firmware does not initialize any other SPI interfaces,
and doing so will require reverse engineering.
Fix case for CAN character driver in simulator when CANFD is disabled
and ch_edl field is not present in CAN header.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Interrupts should be disabled during the access to the user signature
area in internal flash memory, otherwise the system might be halted.
This applies also for read operation as this is performed with a
special flash commands on a special part of memory.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Fix some misspelled field names.
These field names seem to be used only in private contexts.
Thus, the probability of external code accessing these fields is very
low.
In the rare case of external usage, compile time errors will easily
direct users to the new field name.
fix various coding style issues for drivers/sensors:
- remove redundant `#define CONFIG_XXX` that should be provided from Kconfig
- correct section banners
- remove empty section banners
- fix some function banners
Signed-off-by: raiden00pl <raiden00@railab.me>
fix defined but not used warning from CI:
Warning: nxstyle.c:767:13: warning: ‘backslash_to_slash’ defined but not used [-Wunused-function]
767 | static void backslash_to_slash(char *str)
Signed-off-by: raiden00pl <raiden00@railab.me>
Removed from the arm-05.dat file the entries:
CMake,nrf52832-dk:buttons
CMake,nrf52832-dk:wdog
CMake,nrf52840-dk:adc
CMake,nrf52840-dk:buttons
CMake,nrf52840-dk:pwm
CMake,nrf52840-dk:qspi
CMake,nrf52840-dk:timer
present in the jumbo configuration
Signed-off-by: simbit18 <simbit18@gmail.com>
There is no need to check the holder structure "counts". There are cases
where the counts may be greater than 1 when several tasks block
on the mutex, but there is always just one holder, which must be freed.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This is not a bug, but unnecessary code. If the mutex is no longer blocking,
the released thread will set the holder and clear the blocking bit in the end
of nxsem_wait.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Properly select physical bank for block erase based on block number.
Previously, it would configure flash erase bank select based on the logical bank. If banks were swapped, and user application
tried to erase the first block of logical bank 2 (expecting to erase starting at 0x08100000), it would actually erase starting
at 0x0800000. This is fixed in this commit.
Signed-off-by: Tyler Bennett <tbennett@2g-eng.com>
Fix frame reception when CANFD is not enabled and there are many message in
the RX buffer.
The previous implementation assumed that the size of the data in the RX buffer
is constant, which is not true. Fortunately, the amount of
data in the buffer can be easily read from frame->fmt.rwcnt.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
raiden00pl
wangjianyu3
Peter van der Perk
Kerogit
Alin Jerpelea
ouyangxiangzhen
wangzhi16
Matteo Golin
Aung Khant Maw
dongjiuzhu1
Vlad Pruteanu
Abhishek Choithani
Alan Carvalho de Assis
p-szafonimateusz
Michal Lenc
Lars Kruse
Tim Hardisty
simbit18
Jukka Laitinen
Tyler Bennett
Lwazi Dube