Added experimental support for G66 (modal macro call) and G67 (end modal macro call).
Made axis letter to axis/motor assignment for axes ABCUVW freely changeable at compile time.
Fix for some G65 arguments being incorrectly validated for normal use (sign, range).
Added repeat support to G65 macro call via the optional L parameter word.
Changed default setting for ABC-axes to rotary.
Changed defaults for jerk settings to 10x acceleration settings.
Disabled jerk for jog, probe and spindle synchronized motion.
Added _active_probe system parameter, returns -1 if no probe inputs available.
Minor bug fix, G5.1 and G33.1 motion commands were not coverted to the correct string equivalent in $G output.
Fixed handling of NVS buffer allocation, size was not increased as expected when physical NVS is capable of holding more than 2 Kbytes.
This could lead to POS failure or plugins not initializing when a large tool table is configured.
Moved inbuilt G65 macros to the core and added macro G65P5Q<n> for selecting probe.
Added probe id to real time report: |P:<n> will be reported on probe select when more than one probe is available.
Fix for WCO and Ov real time status report elements not beeing reported as they should in some circumstances.
Added HAL parameter for minimum step pulse length set by driver, used for validation of $0 setting.
Changed HAL API signature for outputting step pulses, optimized to allow drivers to only change direction outputs when there is an actual direction change.
Improved handling of overrides at end of program when all motion is buffered. Possible fix for issue #714.
Some optimizations to allow higher step rates.
Added experimental support of LinuxCNC style subroutines.
Available for gcode run from local filesystem such as on a SD card or in littlefs.
Improved handling of G92 when G92 offset is changed while motion is ongoing. Ref. issue #241.
Fix for issue #521, crash when running G65 macro on ESP32.
"Hardened" stream switching code, likely fix for discussion #456.
Fixed incorrect reporting of feed rate modes in $G response.
Added some ioPorts call wrappers, full support for reconfiguring output auxillary pins for PWM output.
