$700 controls whether they are scanned for internally in the main program (1) or always located externally (0).
If scanned for internally the program is run twice, initially in check mode to locate the subroutines before it is rewound and run in normal mode.
If stored externally the file P<macro number>.macro is run, <macro number> is the M98 P value.
Added experimental support for G66 (modal macro call) and G67 (end modal macro call).
Made axis letter to axis/motor assignment for axes ABCUVW freely changeable at compile time.
Fix for some G65 arguments being incorrectly validated for normal use (sign, range).
Added repeat support to G65 macro call via the optional L parameter word.
Changed default setting for ABC-axes to rotary.
Changed defaults for jerk settings to 10x acceleration settings.
Disabled jerk for jog, probe and spindle synchronized motion.
Added _active_probe system parameter, returns -1 if no probe inputs available.
Minor bug fix, G5.1 and G33.1 motion commands were not coverted to the correct string equivalent in $G output.
Parking mode improvements.
Removed requirement for external encoder for spindle sync if stepper spindle is enabled.
Improved handling of $680 stepper enable delay.
Added tool name, pocket number and some lathe specific data fields to the $# tool output when available from the tool table.
If name is available it will be output as a push message on M6 if there is no message in the same block.
Added support for directory up, .., to VFS.
Added new option to $650 - File systems options to enable hierarchical listing of files and directories via $F and $F+ commands.
Added ADC/DAC resolution to $pinstate command, changed reported values to integer for ADC/DAC devices and float formatted for PWM devices.
Numeric settings can now be set via G65P1Q<n>S<value>, <n> is the setting number, <value> is the new value.
Changed alarm code for Modbus exceptions (communication errors) from 14 to 19.
Refactored MPG stream code to allow plugins to hook into MPG streams (via event handler).
Added _free memory system parameter, returns value in KBytes or -1 if not available from driver.
Changed basic stream data type from char to uint8_t, added HAL function and core API for releasing/closing UART streams.
Fixed handling of NVS buffer allocation, size was not increased as expected when physical NVS is capable of holding more than 2 Kbytes.
This could lead to POS failure or plugins not initializing when a large tool table is configured.
Moved probe signal handling from drivers to the core, improved handling of probe disconnected signal.
NOTE: The changes above are quite large, please verify probe operation after installation.
Some minor bug fixes such as incorrect error code returned for unknown $-commands and temporary incorrect position reporting on in-flight G92 offset changes.
Added $PORTS command for listing serial ports, later I will update all drivers to provide the optional information.
Potential fix for polar kinematics not handling axes > 3 correctly, needs testing. Ref. issue #820.
Added lightweight JSON serializer outputting directly to file.
Fix for event handler sometimes called too early. Ref. issue #818.
For developers: added optional device filing system that can redirect file read/write to serial streams.
For programmers: added grbl.on_control_signals_changed event, fired on some signals: optional stop, single step, block delete and cycle start.
Fix for incorrect handling of arcs when negative scaling is enabled with G51.
Changed signature of limit check functions, grbl.travel_limits() et. al.
to include a pointer to the work envelope to use.
Updated spindle off handling to check for "at speed" on deceleration when spindle is "at speed" capable.
Added system parameter _tool_table_size, 0 if a tool table is not enabled.
Removed dependency on safety door input for parking settings: $41, $42, $56-$59, $392 and $393.
Removed strict dependency on spindle encoder input for spindle synced motion,
allows the use of the stepper spindle which has an implicit encoder.
Added core on_spindle_at_speed event. This must be verified with actual VFD spindles, I only have a simulator available.
Improved handling of "iterated" settings, can now be fully implemented by plugins.
