Added experimental support for G66 (modal macro call) and G67 (end modal macro call).
Made axis letter to axis/motor assignment for axes ABCUVW freely changeable at compile time.
Fix for some G65 arguments being incorrectly validated for normal use (sign, range).
Added repeat support to G65 macro call via the optional L parameter word.
Changed default setting for ABC-axes to rotary.
Changed defaults for jerk settings to 10x acceleration settings.
Disabled jerk for jog, probe and spindle synchronized motion.
Added _active_probe system parameter, returns -1 if no probe inputs available.
Minor bug fix, G5.1 and G33.1 motion commands were not coverted to the correct string equivalent in $G output.
Named system parameters _current_pocket and _selected_pocket updated to return the correct values.
Moved handling of keeping last tool number over reboot from template plugin to the core.
Added named system parameters _homed_state and _homed_axes.
Fix for failure to claim auxiliary ports in some configurations.
Moved inbuilt G65 macros to the core and added macro G65P5Q<n> for selecting probe.
Added probe id to real time report: |P:<n> will be reported on probe select when more than one probe is available.
Fix for WCO and Ov real time status report elements not beeing reported as they should in some circumstances.
Added '$709' setting for second PWM spindle when available - PWM options.
Added properties to PWM spindles to allow "overdriving" PWM output when _RPM controls spindle enable signal is enabled with '$9' or '$709'.
Optimized Modbus CRC calculation, may fix issue with a compiler generating different code compared to most others. Ref. issue #723.
Changed signature of vfs.on_mount() event.
Added grbl.on_cycle_start() event, fired on cycle start signal asserted or on cycle start real time command received.
(probe input pullup disable) settings from boolean to bitfield when driver support is available.
Added a few default values for settings in config.h, overridable from the compiler command line.
Added core support for per axis pulloff distance, needs plugin for configuring them.
Added HAL flags for disabling settings for MCU input pins pullup disable, may be set by
drivers/boards that has buffered (optocoupled) inputs that is not possible to change.
NOTE: this is a relatively large change and may have introduced bugs and/or unintended side-effects. Please report any issues!
Added setting $519 for binding spindle encoder to given spindle in multi spindle configurations.
Added machine readable spindle enumeration report, $SPINDLESH.
Increased default value for setting $398 (number of planner blocs) from 35 to 100 for faster laser engraving.
NOTE: the $398 setting value will not change on an upgrade!
NOTE: STM32F103 builds for the 128K flash variants does not have enough free RAM and will keep 35 as the default value.
Increased allowed number of decimal places from 3 to 5 for $10x stepper step/mm settings. Ref. ioSender issue 346.
Added setting $650 for filing system options. Ref. issue 397.
Currently the following bits are available (depending on the configuration):
0 - Auto mount SD card on startup (1).
1 - Do not add littlefs files when listing the root directory (2).
Added build option for lathe UVW mode.
When enabled UVW words can be used to command relative moves for XYZ without switching to relative mode with G91.
NOTE: This permanently sets lathe mode and disables the $32 mode setting.
There are signature changes to some spindle, ioports enumeration and VFS filing system mount functions.
Added events to allow plugin code to handle tool table data, possibly stored on a SD card.
Now returns no data for alarm and error enums when firmware is compiled for 128K versions of the STM32F1xx MCU.
This frees up some flash space for plugins etc.
New/modified core entry points for soft limit checking.
More delta robot tuning, added setting warning in $DELTA output if some settings are inconsistent such as steps/rad, acceleration etc.
Fix for issue #361, HOME status is not reported or reported late when auto reporting is enabled with setting $481.
Added spindle type property to HAL, "hardened" code.
Added new setting $346 for action to take after tool change: either return controlled point (tool tip) back to the same position as before the M6 command (default) or move spindle to Z home.
added some crossbar pin definitions and limited $TPW retract to Z home.
Moved some common driver code to the core and update of current position on steps/mm changes.
