52ac9336c4
boards: change default IP from 192.168.0.3 to 10.41.10.2
...
192.168.0.x is often used by routers for WIFI/ethernet networks, and thus
can create conflicts.
This can happen for example if a companion is connected to the FMU via
ethernet and at the same time connects to a WIFI network as DHCP client.
2024-06-10 11:05:50 +02:00
563fd8427a
boards: increase init stack size by 100B
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2023-10-02 09:37:06 +02:00
c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
40e3503c39
boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration)
2022-12-29 12:50:37 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com >
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com >
Co-authored-by: alexklimaj <alex@arkelectron.com >
2022-11-20 20:28:07 -05:00
5b6e5a0968
boards: NuttX update all boards to preallocated sem holder list
...
- CONFIG_SEM_PREALLOCHOLDERS=32
- CONFIG_SEM_NNESTPRIO=16 (default)
2022-05-31 01:41:07 -07:00
6981a70859
boards: new Sky-Drones AIRLink board support
2022-04-24 13:57:42 -04:00
Beat Küng
Silvan Fuhrer
Igor Mišić
Daniel Agar
Kirill Shilov