* sensors: move GPS antenna offsets to per-receiver parameters
Move antenna position configuration from the single EKF2_GPS_POS_X/Y/Z
parameter set into per-receiver SENS_GPS{0,1}_OFF{X,Y,Z} parameters in
the sensors module. Each offset slot is matched to a physical receiver
by device ID (SENS_GPS{0,1}_ID), falling back to uORB instance index
when no IDs are configured.
The antenna offset is now carried through the SensorGps uORB message
and blended alongside other GPS states when multi-receiver blending is
active, so EKF2 receives the correct lever arm for whichever receiver
(or weighted combination) is selected.
- Add antenna_offset_{x,y,z} fields to SensorGps.msg
- Remove EKF2_GPS_POS_X/Y/Z params; EKF2 reads offset from gnssSample
- Add SENS_GPS{0,1}_ID and SENS_GPS{0,1}_OFF{X,Y,Z} params (module.yaml)
- Blend antenna offsets in GpsBlending (weighted average)
- Add unit tests for single, blended, and failover antenna offset cases
- Migrate params.c to module.yaml for the vehicle_gps_position module
* sensors: gps_blending: add asymmetric weight and fallthrough offset tests
Add two additional antenna offset test cases:
- dualReceiverAsymmetricWeightAntennaOffset: verify that unequal eph
values produce correctly skewed blend weights (0.8/0.2) and that the
output antenna offset reflects the weighted average
- blendingFallthroughAntennaOffset: verify that when blending is enabled
but can_do_blending evaluates false (eph=0), the non-blending path
correctly assigns the selected receiver's antenna offset
* feat(param_translation): translate EKF2_GPS_POS_ to SENS_GPS0_OFF_
* fix(msgs): proper formatting
* chore(msg): 0 if invalid/unknown
* fix(ROMFS): migrate EKF2_GPS_POS_ params
* fix(docs): migrate EKF2_GPS_POS_ params
* fix(blending): unsigned param
* Update msg/SensorGps.msg
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix(sensors/gps): remove 'values:' tag in module.yaml
* fix(sensors/gps): unsigned instance index
* fix(blending): restore const on gps_blend_states()
Move antenna offset blending into blend_gps_data() where the
weights are computed, keeping gps_blend_states() const.
* fix(sensors/gps): fix msg annotation and restore SENS_GPS_PRIME values
Remove incorrect @invalid NaN annotation from antenna offset fields
(0.0 default is correct, not a sentinel). Restore values tag for
SENS_GPS_PRIME so QGC shows a dropdown.
* fix(gps_blending): fix pre-existing bug to clear _gps_updated flags
The loop iterates over i but always clears gps_select_index. The intent is to clear
all updated flags, but only the selected one gets cleared (N times)
* test(gps_blending): add stale update flag regression test
Recommend setting SENS_GPS_PRIME to the moving base CAN node ID
when using dual antenna GPS heading. The rover receiver in a
moving baseline configuration can experience degraded navigation
rate and increased data latency when corrections are intermittent,
making the moving base the better primary position source.
* feat: implement UAVCAN LED control for individual light control and assignment
* uavcan led: nit-picks from review
* uavcan led: reduce maximum number of lights
to avoid unused parameters
* uavcan led: simplify anticolision on check
* uavcan led: correctly map 8-bit RGB to rgb565
* Trim param name character arrays to 17
16 characters + \0 termination
* uavcan led: final nit-picks
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
* dronecan: esc: change UAVCAN_ESC_IFACE to 2 to default to only outputting on CAN2
* revert param default and update docs
* Subedit
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Remove Zubax Orel - not available and no other presence
* Fix up zubax product links
* Snapdragon flight - delete as no longer relevant hardware
* Delete intel aero docs
* Brushless whoop - remove docs except for link to old version
* Many link fixes
* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
Hamish Willee
Jacob Dahl
Matthias Grob
Claudio Chies
Claudio Chies
PX4BuildBot
Patrik Dominik Pordi
patrikpordi
Jacob Dahl