8 Commits

Author	SHA1	Message	Date
Aaron1356	066e8f7fea	Adding Light Ware GRF Serial Driver (#26404) ... * Creating a base for grf lidar * Serial Drive is working, need to work out distance publish * WIP Getting Range Data in cm * Working Rand Distance Values for GRF 250 and GRF500 * Review Changes * Compiler fixes * Update to date * small update * Fix typo and remover unused libs * removing unused enum * Update to the Documentation * Fiving scaling issue * update to the logic * [Feature] Adding I2C driver for the GRF250 and GRF500 models (#26425) * Adding the GRF I2C driver * I2C Driver Working * Removing a lot of unnecessary code * fixing names * Changing the i2c Driver to be in the lightware laser * remove the old driver * formatting fix * Adding Ligthware GRF to documentation * Update to the Documentation * Ensuring sample_perf ends * Updating Docs * uavcannode: implement hardpoint commands (#26334) * implement cannode hardpoint commands Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com> * Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com> * add hardpoint sub to ark cannode, simplify handling of hardpoint broadcast Signed-off-by: dirksavage88 <dirksavage88@gmail.com> --------- Signed-off-by: dirksavage88 <dirksavage88@gmail.com> Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com> * voxl_esc: Limit frequency of UART passthru writes to 20Hz * voxl2_io: Added UART passthru * docs: update link for px4 ros2 interface lib python api docs * estimator_interface: remove unused getter * gnss_checks: always run strict checks on ground With the goal to never take off if the GNSS solution is not fullfilling the configured requirements still not stopping to use it in case it degrades mid air. * ekf2 unit-tests: adapt to strict GNSS checks on ground * escCheck: rework online check to properly report offline ESCs previous to this 09d79b221f set `esc_online_flags` e.g. for UAVCAN ESCs which specific one is online and that then got compared to a mask where the first `esc_count` bits were set. So if only ESC 5 is mapped and online you get the message "ESC 156 offline" because `esc_online_flags = 0b1000` gets compared to `online_bitmask = 0b1` based on `esc_count = 1` and the motor index is `esc[0].actuator_function = 0` wrapped using `0 - actuator_motors_s::ACTUATOR_FUNCTION_MOTOR1 + 1 = 156`. * FailureDetector: consistent timestamp naming * FailureDetector: rework motor status check * FailureDetector: implement upper and lower current limit with offset * Update src/modules/commander/failure_detector/FailureDetector.cpp Prevent Buffer overflow * Update Format * Subedit * Shrink and rename image * Apply suggestion from @hamishwillee Sounds good Co-authored-by: Hamish Willee <hamishwillee@gmail.com> * Apply suggestion from @hamishwillee More universal approach Co-authored-by: Hamish Willee <hamishwillee@gmail.com> * Update to the Documentation * FailureDetector: rework motor status check * FailureDetector: implement upper and lower current limit with offset * Subedit * docs: update parameter reference metadata * Remove pregenerated files - that should all be tidied up next time this runs * remover GRF parameters * Documentation updates * Fixing Merge Conflicts * remove @ * Undo Changes to parameter_reference * remove the code that will be autogen-ed * Update the Camake File --------- Signed-off-by: dirksavage88 <dirksavage88@gmail.com> Co-authored-by: Andrew Brahim <35986980+dirksavage88@users.noreply.github.com> Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com> Co-authored-by: Eric Katzfey <eric.katzfey@modalai.com> Co-authored-by: Beat Küng <beat-kueng@gmx.net> Co-authored-by: Matthias Grob <maetugr@gmail.com> Co-authored-by: Marco Hauswirth <marco.hauswirth@auterion.com> Co-authored-by: Nick <145654544+ttechnick@users.noreply.github.com> Co-authored-by: Hamish Willee <hamishwillee@gmail.com> Co-authored-by: Ramon Roche <mrpollo@gmail.com>	2026-02-16 16:34:48 -05:00
Hamish Willee	c83d8e807f	Shrink all images	2025-12-01 09:20:17 -09:00
patrikpordi	204d82a5c1	Add ARK documentation for GPS modules, distance sensors, and power modules ... - Added DAN, SAM, SAM Mini, X20, RTK L1 L5 GPS modules - Added ARK distance sensors documentation - Added ARK power modules documentation	2025-12-01 09:20:17 -09:00
JoelJ18	4fa9aa205f	[Docs] MicroStrain driver documentation (#25376) ... * Initial Draft * prettier + parent INS doc addition * Typo fixes and param description improvements * LinkedFileMissingAnchor Fix * External mag and optical flow doc update * Reverting module.yaml * Apply suggestion from @hamishwillee --------- Co-authored-by: Hamish Willee <hamishwillee@gmail.com>	2025-10-15 19:04:51 +11:00
Samuel Toledano	b2672910da	sbgecom: Implement sbgECom INS driver (#24137) ... * Add new INS driver sbgECom Implement sbgECom messages handling to provide IMU sensors, GNSS and EKF data to the autopilot Be able to parametrize the serial port, baudrate and the communicating mode Clone sbgECom library only if sbgecom support is enabled and apply a patch Be able to send SBG Systems INS settings in several ways when starting sbgecom driver * Fix sensor airspeed simulator units * Fix HIGHRES_IMU pressure unit * Allow HIGHRES_IMU to support 4 IMUs * sbgECom: Add documentation * Use submodule instead of fetching sbgECom using CMake * Remove patch strategy * Fix dates * Remove patch file * Update SBG dev type ID Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com> --------- Co-authored-by: Samuel Toledano <samuel.toledano@sbg-systems.com> Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>	2025-09-11 00:37:41 -08:00
Hamish Willee	23bc81078a	Subedit	2025-07-31 21:50:27 +10:00
Hamish Willee	b3e0231a18	docs: Add InertialLabs sensors configuration page	2025-07-31 21:50:27 +10:00
Hamish Willee	88d623bedb	Move PX4 Guide source into /docs (#24490) ... * Add vitepress tree * Update existing workflows so they dont trigger on changes in the docs path * Add nojekyll, package.json, LICENCE etc * Add crowdin docs upload/download scripts * Add docs flaw checker workflows * Used docs prefix for docs workflows * Crowdin obvious fixes * ci: docs move to self hosted runner runs on a beefy server for faster builds Signed-off-by: Ramon Roche <mrpollo@gmail.com> * ci: don't run build action for docs or ci changes Signed-off-by: Ramon Roche <mrpollo@gmail.com> * ci: update runners Signed-off-by: Ramon Roche <mrpollo@gmail.com> * Add docs/en * Add docs assets and scripts * Fix up editlinks to point to PX4 sources * Download just the translations that are supported * Add translation sources for zh, uk, ko * Update latest tranlsation and uorb graphs * update vitepress to latest --------- Signed-off-by: Ramon Roche <mrpollo@gmail.com> Co-authored-by: Ramon Roche <mrpollo@gmail.com>	2025-03-13 16:08:27 +11:00