186 Commits

Include renames

Author	SHA1	Message	Date
Afonso Oliveira	7212b366ae	Added an Erbium example to the RISC-V64 GNU port ... ThreadX had no board support for Erbium, the OpenHW Foundation CORE-ET RISC-V platform that Zephyr and NuttX support. Its hart implements only part of the F extension, needs a 4 KiB aligned mtvec and uses the original Shakti UART. The example runs the standard demo on hart 0 in machine mode. It builds the library and the demo for rv64imc_zicsr_zifencei with the soft-float lp64 ABI and links without libc or libgcc, so the pinned riscv64-unknown-elf toolchain can build it. It programs the machine timer, a polling UART console and the PLIC, writing the source priorities and threshold that silicon hardwires because the simulator resets them to 0. No shared file changes. The demo built without warnings and ran on erbium_emu from et-platform 836a4ab, with all eight threads reporting and five thread 0 wakeups in 100M cycles, which matches the 2 MHz tick. Separate test images took five PLIC UART interrupts through the ThreadX ISR path and halted with mcause 2 on an illegal instruction. check_ai_disclosure.sh and check_ports.sh passed. Assisted-by: Claude Code (Opus 5.5) <noreply@anthropic.com>	2026-09-30 10:49:55 -04:00
Frédéric Desbiens	0a52df8f87	Stopped the version pass skipping ports in silence (#786) ... The port stage matched a version only where "Version" was followed immediately by four dotted numbers. A port writing three numbers, or a stray letter before the first, was passed over and kept its old release, and the pass reported success either way. The RISC-V32/IAR port is one of them. It reads "Version G6.5.0.202601", and the letter in front of the number has kept it out of every pass since, so it has advertised 6.5.0.202601 across two releases it was not part of. Its string now reads the current release. The pattern accepts three or four numbers and tolerates a leading letter. A check follows it: any port header that names a release other than the one being prepared is listed and the pass stops, so a port the substitution cannot reach fails the release instead of shipping a version that misreports itself. Verified: every ThreadX port header now advertises 6.5.2.202603. Against a FileX tree, a port the substitution cannot reach makes the pass name the file and exit non-zero, and correcting that string lets the pass complete. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-28 19:56:37 -04:00
Frédéric Desbiens	a7ded6a3b9	Updated ThreadX version constants and port strings to 6.5.2.202603 (#781) ... ThreadX still declares 6.5.1.202602 with hotfix 'a', which is the previous release rather than the one being cut. prepare_release.sh updated the five version constants in tx_api.h and the version string in 211 port headers across ports, ports_smp, ports_arch and ports_module. The hotfix letter is cleared, since the target has none. Nothing else changed: every line in the port commit carries a version, and no file outside an inc/tx_port.h was touched. The port consistency checks passed before the branch was cut, which is what the script gates on. Host regression 113/113 with zero warnings, and the AI disclosure check passes. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-28 14:36:10 -04:00
Frédéric Desbiens	83361990cb	Normalized the AI disclosure comment and added a check that keeps it so (#762) ... * Normalized the AI disclosure line across every tracked file type The repository-wide pass covered source files only, so build files, CMake toolchain files, shell scripts and the GDB and manifest files kept the older per-edit form of the disclosure comment, which names a product and a model version. The Cortex-R52 module manager port then merged after that pass and brought the old form back into the sources as well. Replaced it with the fixed text in all of them, using the comment character each file already uses. Comment-only. 143 files, one line each. The repository now holds 601 files carrying exactly one disclosure line, none carrying the old form, and none carrying more than one. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> * Added a check that keeps the AI disclosure comment in its one accepted form Nothing enforced the disclosure convention, so the drift it exists to prevent returned twice: once when a port merged after the normalisation pass carrying the older per-edit form, and once because that pass had covered source files only, leaving build files and scripts untouched for months. Added scripts/check_ai_disclosure.sh, which rejects the superseded per-edit form, a doubled comment marker, more than one disclosure line in a file, and any spelling of the line that is not exact. It runs from repo_checks.yml, a workflow with no path filter, because a source-path filter is what hid the build files the first time. The check passes on this branch. Each of its four rules was confirmed to fail on a tree with that defect reintroduced, and to pass once it was removed. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> * Normalised the disclosure lines that landed after this branch Thirteen files reached dev after this branch was written, each carrying the superseded per-edit form. txm_module_manager_dispatch.h reached it with six stacked copies, naming the same product and the same model every time -- the accumulation the fixed text exists to prevent. Each of those files now carries one disclosure line in the accepted form. Where the accepted line was already present, the superseded ones are deleted rather than converted, so no file gains a second. check_ai_disclosure.sh reported eighteen hits across thirteen files before the pass and passes after it. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> * Exempted Markdown from the near-miss disclosure check The near-miss rule flags any line carrying the phrase "AI assistance" that is not the accepted text, which is right for source but wrong for documentation. The contribution guide has to quote the accepted line and say when it applies, so the check reports two paragraphs of prose as drift and fails the build. Markdown is now exempt from that rule alone. The three rules that matter for a documentation file -- superseded form, doubled comment marker, duplicate line -- still scan it, so a stale disclosure in a Markdown file is still caught. The check passes against a tree carrying the rewritten contribution guide, and still fails when a near miss is planted in a source file. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> * Corrected the trailer command named in the disclosure check The header comment points a reader at git's own trailer parser to find out which agents have touched a file. That parser reads trailers only from a block at the very end of a message, so a squash merge -- which concatenates a branch's messages -- buries every trailer but the last one mid-message, and an indented trailer is skipped outright. On dev it finds 122 attributions where 163 exist. The comment now names count_assisted_by.sh, which reads whole bodies. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-28 14:03:53 -04:00
Frédéric Desbiens	990faf670d	Enabled execution profiling for Cortex-R5 (#766) ... The Cortex-R5 assembly guarded its execution-profile hooks with only the legacy TX_ENABLE_EXECUTION_CHANGE_NOTIFY symbol. The documented TX_EXECUTION_PROFILE_ENABLE configuration initialized profiling without recording thread or interrupt transitions. I made all AC5, AC6, GNU, Green Hills, and IAR hooks accept both symbols. I also extended the port consistency and GNU/LLVM feature checks to cover the current configuration. All 849 base assembly files and all 219 TX_EXECUTION_PROFILE_ENABLE files passed with GCC 14.2.1 and clang 22.1.0. A CMake/Ninja Cortex-R5 profile build emitted all seven expected hook relocations. Proprietary toolchains were not run. Assisted-by: Codex (GPT-5) <noreply@openai.com>	2026-09-28 12:45:09 -04:00
Frédéric Desbiens	b567428f2a	Stopped the Linux port losing a mutex wake-up to a suspend signal (#754) ... This is the ThreadX half of the defect fixed for ThreadX SMP in an earlier pull request. The Linux port suspends a thread with a signal whose handler calls sigsuspend and does not return until the thread is resumed, and it takes its critical section with a bare pthread_mutex_lock through tx_linux_mutex_lock. A thread can therefore be signalled while it is parked on _tx_linux_mutex. glibc waits for a contended mutex in a loop that re-arms the futex wait after a signal, and this handler never returns to it. The next unlock hands its wake-up to that thread, which will not act on it, and any other thread parked on the mutex is never woken, leaving the mutex free with waiters on it. tx_linux_mutex_lock now calls a helper that waits with pthread_mutex_timedlock and retries, so the wait is re-armed every TX_LINUX_MUTEX_RETRY_NSEC and a lost wake-up costs one retry period instead of the process. The period is one millisecond. pthread_mutex_timedlock needs _GNU_SOURCE under -std=c99, which both of this port's build systems already define. These are the only two ports affected: a sigsuspend-based suspend handler exists in the Linux and SMP Linux ports and nowhere else, and those two are also the only ports taking a critical section with pthread_mutex_lock. Unlike the SMP port, this one has never been observed to deadlock, which is consistent with one emulated core and far less suspend and resume traffic. The fix is by inspection, and verified as breaking nothing: all seven configurations pass with retries disabled, 105/105 in five and 100/100 in two. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-28 12:42:48 -04:00
Frédéric Desbiens	70a5300977	Added a ThreadX module manager port for the Cortex-R52 (#639) ... Added the first GNU ThreadX module port for an Arm R-profile core. The port combines the PMSAv8-R MPU model from Cortex-M33 with the AArch32 privilege and processor-mode handling from Cortex-R4. It provides the complete module path: headers, manager sources, scheduler integration, user-mode entry, SVC dispatch, data- and prefetch-abort capture, fault notification, relocatable module loading, and shared-memory regions. Module isolation uses eight MPU regions (8–15) with a 64-byte granule. The scheduler replaces those regions on each module switch and manages a separate privileged loading window in region 16. Assembly-visible structure offsets and region-layout assumptions are checked at build time. Added independent module demonstrations for the S32Z280-594EVB and Armv8-R AEM FVP. The automated FVP regressions cover: - Loading the same position-independent module at different addresses - User-mode data and instruction access violations - Fault capture and notification for both abort types - Shared-region access, alignment, exhaustion, empty-size, and overflow handling - Required module-property combinations - The GCC CLZ-based priority search The port requires user mode and memory protection together, at least 17 EL1 MPU regions, and currently validates A32 modules; Thumb module execution remains unvalidated. Validated with GNU Arm 14.3.1. The FVP suites pass 8/8 in the default configuration and 11/11 with hard-float, FIQ, and interrupt nesting enabled. The S32Z280 images build cleanly, and the module isolation and relocation paths were exercised on S32Z280 silicon during development. Matching user documentation is provided by rtos-docs-asciidoc PR #41. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-17 15:39:30 -04:00
Frédéric Desbiens	ad558a7b1f	Fixed the zero trace time stamps in the Linux ports' MISRA builds (#749) ... Both Linux ports define TX_TRACE_TIME_SOURCE as _tx_misra_time_stamp_get() when TX_MISRA_ENABLE is set, and neither implements that function, so both inherit the generic `return(0);` from tx_misra.c. Every trace event is stamped zero. The buffer carries no timing, and the kernel's own check for an entry having been overwritten -- time_stamp against the entry's own stamp, in the block and byte allocates and in the system suspend and resume -- compares zero with zero, so it never fires and a service patches whatever now occupies the slot. Both ports now read in MISRA builds the clock they already read otherwise, _tx_linux_time_stamp.tv_nsec, which TX_TRACE_PORT_EXTENSION refreshes on every recorded event in both forms of the insert. The non-SMP port's non-MISRA macro carried a trailing semicolon, which made it a statement and is why the MISRA insert -- which takes the time source as a function argument -- could not use it; that is dropped and the two branches become one definition. Both headers keep the _tx_misra_time_stamp_get declaration, because tx_misra.c still defines it and is compiled for these ports. The MISRA insert evaluates its time source before the callee refreshes the clock, so each entry carries the reading taken at the previous recorded event. Stamps are real, distinct and ordered, which is what the overwrite check needs. The trace entry update test gains an assertion that the buffer holds an entry the port actually stamped. It fails on dev with ERROR #13 under misra_trace_build and passes with this change. Suites green: 7/7 ThreadX configurations, 5/5 SMP. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-16 14:01:07 -04:00
Frédéric Desbiens	b93d1ee92f	Fixed the simulator ports and thread create paths so they compile when TX_MISRA_ENABLE is defined (#742) ... * Fixed the simulator ports so they compile when TX_MISRA_ENABLE is defined _tx_thread_stack_build() in the four simulator ports converts the fake stack pointer through TX_POINTER_TO_ALIGN_TYPE_CONVERT and TX_ALIGN_TYPE_TO_POINTER_CONVERT. tx_api.h defines both macros only in the non-MISRA branch of its #ifdef TX_MISRA_ENABLE, so with that macro defined the two names are undeclared and none of the four files compiles. Reproduced with: gcc -m32 -c -DTX_MISRA_ENABLE -I common/inc -I ports/linux/gnu/inc \ ports/linux/gnu/src/tx_thread_stack_build.c -o /dev/null which reports both names as implicit declarations and then an int to pointer assignment. The same command without the define compiles cleanly. No build configuration under test/tx/cmake or test/smp/cmake defines TX_MISRA_ENABLE, so CI never compiles these files in that mode. It surfaced on a branch that carries such a configuration. The conversions are now written inline, which is what the non-MISRA macros expand to and what the surrounding port code already does, including the line this replaced. The alternative would be the idiom common/src/tx_thread_create.c uses for the same conversion: an explicit #ifdef selecting the ULONG pair under MISRA. That is not equivalent here. On __x86_64__ this port defines ULONG as unsigned int and ALIGN_TYPE as unsigned long long, so a pointer round-tripped through the ULONG pair loses its top 32 bits. Writing the conversion inline keeps one form that is correct in both modes and on both widths. Verified by compiling the Linux port with and without TX_MISRA_ENABLE, both clean. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> * Fixed the same MISRA build break in the SMP and module manager thread create _tx_thread_create() in common_smp and _txm_module_manager_thread_create() convert the thread's stack start through TX_POINTER_TO_ALIGN_TYPE_CONVERT and TX_ALIGN_TYPE_TO_POINTER_CONVERT with no conditional at all. tx_api.h defines both macros only in the non-MISRA branch, so with TX_MISRA_ENABLE and TX_ENABLE_STACK_CHECKING both defined neither file compiles. It is the same defect as the simulator ports in the previous commit, in two more files. Reproduced with: gcc -c -DTX_MISRA_ENABLE -DTX_ENABLE_STACK_CHECKING \ -I common_smp/inc -I ports_smp/linux/gnu/inc \ common_smp/src/tx_thread_create.c -o /dev/null which reports both names as implicit declarations. Both files now compile with and without TX_MISRA_ENABLE. The conversions are written inline for the same reason as the ports: the #ifdef idiom that common/src/tx_thread_create.c uses selects the ULONG pair under MISRA, which truncates a pointer wherever ALIGN_TYPE is wider than ULONG. That is reported separately. Verified: the SMP regression suite passes 117 of 117, and the ThreadX suite still builds. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-15 23:19:32 -04:00
Frédéric Desbiens	9e4c57138d	Normalized the AI disclosure comment to one fixed line per file (#740) ... The per-edit disclosure named the product and model, so every agent and every model version appended another line. 74 files carried two to four of them, and the same five products had accumulated 13 spellings -- Copilot against GitHub Copilot, Claude Sonnet 4.6 against claude-sonnet-4.6, four spellings of Codex. Twenty assembly lines carried a doubled comment marker, `; //` or `@ //`. Every file now carries exactly one line, fixed text naming no product: Portions of this file were generated with AI assistance. It is written with the comment character that file already uses, so the `;` and `@` assembly files keep theirs and the doubled markers are gone. Precise attribution stays on the commit, where the Assisted-by trailer is per-change, dated and attached to the diff it describes. A header line cannot hold that record honestly, because the code it names gets rewritten and the line stays. A file-level flag answers whether; the history answers who. Comment-only. 455 files, 455 insertions and 574 deletions: every removed line was a disclosure line, every added line is the fixed text, and no file is left with zero or with more than one. `scripts/check_ports.sh` passes, including the reproducibility check that would catch a ports_arch master and its generated copies drifting apart. Recompiled against dev, every file that builds without a vendor toolchain gives a byte-identical object: 19 of 19 C files under common, 100 of 100 GNU assembly files, and all 16 assemblable files whose comment marker changed. The 10 remaining marker changes are ac5 and IAR sources where `;` already started the comment and only the redundant `//` was removed. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-15 17:17:26 -04:00
Frédéric Desbiens	f5e59a1dd3	Completed Windows simulator support and regression coverage (#736) ... Completed and stabilized the Win32 and Win64 MSVC simulator ports. - Replaced high-latency host synchronization with bounded scheduler handoffs and critical sections. - Added a high-resolution timer, tick batching, idle fast-forward, shutdown coordination and Win64 extension-pointer support. - Brought the Windows regression tooling and the new thread-transition tests up on CMake, Ninja and the Visual Studio Build Tools. - Extended the SMP teardown diagnostics and corrected 64-bit trace-test handling. This supersedes the historical `win64`, `win32-perf`, `windows-sim-ports` and `windows-sim-ports-completion` branches; no unmerged change from them is missing here. The original Win64 port landed in #529. 1,610 of 1,610 tests pass, across five configurations each: Win32 515, Win64 515, Win64 SMP 580. No external dependency was added, and the existing MSVC warnings in the trace configuration are unchanged. Hardware validation does not apply to host simulator ports. Assisted-by: Codex (gpt-5.6-sol) <codex@openai.com>	2026-09-15 16:47:08 -04:00
Frédéric Desbiens	9b2979e6b0	Replaced the GNU-only dsb/isb 0xF operands with the UAL sy form (#729) ... Fixes #551 `_tx_thread_system_return_inline()` in the Cortex-M `tx_port.h` headers spells its barriers `dsb 0xF` and `isb 0xF`. A bare hexadecimal operand is a GNU assembler extension, and IAR rejects it with `operand syntax error`, so the header cannot be included at all. The block is guarded for GCC, armclang and IAR together, so every IAR user of an affected port hits it -- four independent reports on Cortex-M33 and M7 with EWARM 9.50 and 9.70. Both operands become `sy`, the Arm UAL name for exactly what `0xF` encodes. The generated instruction is unchanged. Applied to the two `ports_arch` masters and all 32 copies under `ports`, covering M0, M23, M3, M33, M4, M52, M55, M7 and M85 across ac5, ac6, gnu, iar and keil, plus the `scripts/check_ports.sh` probes that matched the old spelling. `check_ports.sh` passes, the copy scripts still reproduce every generated port byte for byte, and `arm-none-eabi-gcc -O2` compiles a caller for every patched header, emitting `dsb sy` and `isb sy`. Three headers that need toolchain intrinsics GCC does not ship fail identically on `dev`. Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-15 16:24:45 -04:00
Frédéric Desbiens	5d235a534c	Fixed the garbage _tx_initialize_unused_memory in the GNU Cortex-A ports (#726) ... Fixes #435 `LDR x1, =__top_of_ram` already loads the top of RAM, so the `LDR x1, [x1]` that followed read whatever sat at that address and left `_tx_initialize_unused_memory` holding garbage. Dropped that instruction from the 13 non-SMP GNU Cortex-A ports, the ARMv8-A source they are generated from, and the two Cortex-A35 module examples. The SMP GNU ports already had the correct form, and the Arm Compiler ports are unaffected -- their symbol really does need the dereference. `scripts/check_ports.sh` passes and the `gnu` CI job build-verifies the AArch64 ports. Not run on hardware. Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-15 16:24:09 -04:00
Frédéric Desbiens	dde43b8ab2	Replaced the stale system stack switch pseudo-code in the ARMv7-A ports with comments that describe what the code actually does (#735) ... The context save, vectored context save and system return routines in the ARMv7-A ports carried pseudo-code comments claiming that they saved the thread stack pointer and then switched to _tx_thread_system_stack_ptr. Neither of those things happens, and none of these ports references that variable outside an unused IMPORT in their example builds. On ARMv7-A each processor mode has its own banked stack pointer. The IRQ handler branches to _tx_thread_context_save while still in IRQ mode, so the core's banked IRQ stack already serves as the system stack, and the thread stack pointer is stored in the control block by _tx_thread_context_restore, and only when the interrupt results in preemption. The scheduler runs on the banked SVC mode stack that the startup code sets up. There is nothing for a software stack switch to do. The comments were therefore misleading rather than merely redundant, and had led at least one user to try to restore the code they described. They are now replaced by a description of the actual mechanism. The AArch64 SMP ports keep their comments unchanged, because ARMv8-A does not bank a stack pointer per processor mode and those ports do reload _tx_thread_system_stack_ptr[core] explicitly. This is a comment-only change. Every changed line is a comment, and all twenty-five GNU variants still assemble cleanly for their target core. The fourteen files under ports/cortex_a{5,7,8,9,12,15,17} were regenerated from ports_arch/ARMv7-A/threadx/common/src/tx_thread_system_return.S with ports_arch/ARMv7-A/update.sh. The ARMv7-A SMP ports have no generator, so those files were edited directly. Fixes #734 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-11 13:27:32 -04:00
Frédéric Desbiens	7f6e496233	Added the missing VFP enable field to the Cortex-R5/AC5 thread control block, which VFP builds were writing over the FileX pointer (#715) ... The Cortex-R5/AC5 port defines TX_THREAD_EXTENSION_2 as empty while its assembly reads and writes the per-thread VFP enable flag at [thread, #144]. With TX_ENABLE_VFP_SUPPORT that offset lands on tx_thread_filex_ptr, so tx_thread_vfp_enable corrupted the FileX pointer and lazy save/restore tested an unrelated value. Defined TX_THREAD_EXTENSION_2 as ULONG tx_thread_vfp_enable, matching the Armv7-A ports and the Cortex-R4/R5 GNU and AC6 ports fixed earlier, and added tx_port_offset_check.c so a future layout change breaks the build instead of silently retargeting the accesses. The offset was measured at 144 for this port and asserted. Fixes #382 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-09 17:17:37 -04:00
Frédéric Desbiens	383dd311cd	Removed the vector table offset register and system stack pointer setup from the Cortex-M low-level initialization (#714) ... _tx_initialize_low_level wrote VTOR and derived _tx_thread_system_stack_ptr from the reset vector on every Cortex-M port. Programming VTOR is the job of the low-level startup code that runs before the kernel is entered, and doing it again inside ThreadX silently overrode a vector table that the application, a bootloader or a firmware update had already installed. It also forced every application to export a vector table symbol that the kernel itself never needed. _tx_thread_system_stack_ptr is never read by any Cortex-M port, so the value copied out of the reset vector served no purpose. Both blocks are removed from all Cortex-M ports, together with the now-unused symbol declarations. The GreenHills files keep the NVIC base address load that the removed block used to leave in r0 for the SysTick setup that follows. Applications that relied on ThreadX programming VTOR must now set it in their startup code. The bundled examples link their vector table at address zero and run on the reset default. Fixes #370 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-09 16:28:59 -04:00
3 people	850a172bac	Added lazy FPU stacking and QEMU functional tests for RV64 GNU port (#549) ... * add lazy FPU stacking to context save/restore Save mstatus/sstatus to stack slot 29 and skip floating-point register save/restore when FS is Off (bits 14:13). This avoids unnecessary FP context work for threads that do not use the FPU. - context_save: check FS in nested and first-level interrupt paths - context_restore: gate FP restore on nested, no-preempt, and preempt paths - use sstatus when TX_RISCV_SMODE is defined, otherwise mstatus * add QEMU virt CMake build and automated test runner Wire the QEMU virt demo into the CMake build system and add a Python/GDB functional test runner, mirroring the risc-v32/gnu port. - Add qemu_virt/CMakeLists.txt to build kernel.elf and register the check-functional-riscv64 target (requires Python3; skipped if absent) - Link kernel.elf with --whole-archive so all ThreadX symbols resolve - Pin _start at 0x80000000 via .text.boot in entry.s and KEEP(*(.text.boot)) in link.lds - Extend demo_threadx.c with fpu_test_val and shorten thread_0 sleep for GDB-driven FPU, timer, and preemption checks - Add test/azrtos_test_tx_gnu_riscv64_qemu.py; verified passing on QEMU virt (FPU, timer interrupt, preemption) * Clean up RV64 PR scope and remove QEMU test integration leftovers Revert accidental RV64 qemu_virt test/CMake integration changes and keep this branch focused on lazy FPU context handling only. Also remove unintended TX_RISCV_SMODE-based mstatus/sstatus save path and align comments/logic to mstatus-only behavior. * Initialize mstatus.FS in RV64 stack build so new threads start with clean FP state Slot 29 was left uninitialized while context restore reads it as an FP-live hint; garbage FS bits could make a new thread inherit the previous thread's floating-point registers. * Add RV64 regression test for the FP state of a newly created thread The test dirties every floating point register, then creates a thread and checks that the stack builder wrote the mstatus slot and that the new thread starts with all floating point registers zeroed. It is registered for RV64 only, since the RV32 stack builder still leaves the slot unwritten. * Completed the RISC-V64 lazy FPU so the restore side matches the save side The lazy FPU save in this branch skips the floating-point stores when mstatus.FS is Off, and records the mstatus it judged that on in frame slot 29. Merged onto current dev, only the save side had that treatment: both restore paths and the scheduler's interrupt-frame path still reloaded the FP registers unconditionally, from slots the save had deliberately left alone. A thread that never touched the FP unit would have had whatever the frame happened to contain loaded into its registers, and FS driven to Dirty on the way out. The guard is added at the three places that consume an interrupt frame: both paths in _tx_thread_context_restore, and _tx_thread_schedule_loop. Each reads slot 29 and skips the FP block when FS was Off, which is the same shape the risc-v32 port already uses. The solicited path is deliberately left alone. _tx_thread_system_return saves the callee-saved FP registers unconditionally, so restoring them unconditionally is consistent; making that pair lazy as well is a separate change, and risc-v32 is the model for it. Verified with QEMU on all five configurations: risc-v64 96 of 96 passing, five configurations, nothing unlinkable risc-v32 95 of 95 passing, five configurations, unchanged functional check-functional-riscv64 passes every check The ninety-sixth test is the one this branch adds. It is load bearing: seeding stack build with FS = Off instead of Initial makes it fail, and restoring the seed makes it pass, so it guards the behaviour the rest of this branch is about rather than passing regardless. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> --------- Co-authored-by: r <r@r> Co-authored-by: Frédéric Desbiens <frederic.desbiens@eclipse-foundation.org>	2026-09-09 16:25:28 -04:00
Frédéric Desbiens	6ce8d5cc76	Marked every published ThreadX include directory as SYSTEM so applications no longer get warnings from ThreadX headers (#713) ... * Marked every published ThreadX include directory as SYSTEM so applications no longer get warnings from ThreadX headers Commit 8c3c08f added the SYSTEM keyword to the target_include_directories call in common/CMakeLists.txt, but the same call in every port, in the SMP common directory's consumers, in the POSIX and FreeRTOS compatibility layers, and for the generated tx_user.h directory was left unchanged. A consumer building with a strict warning set therefore still saw diagnostics coming from tx_port.h and from the compatibility layer headers, which is exactly what the original change set out to avoid. Added the SYSTEM keyword to all of those calls so CMake emits -isystem rather than -I for every directory holding a ThreadX public header. The ARMv7-M, ARMv8-M, ARMv7-A and ARMv8-A architecture sources under ports_arch were updated alongside the ports they generate, keeping the two in step. Directories that are PRIVATE to an example or test build were left as they are, since nothing is published from them. Fixes #290 Assisted-by: Copilot (Opus 5) <noreply@github.com> * Stopped apt-get update being a gate it was never meant to be apt-get update fails if any configured repository serves a bad index, including ones this project never reads. The GitHub runner image carries Google's and Microsoft's apt repositories, and a Hash Sum mismatch from Google's, their CDN caught mid-publish with the index and the Release file eight hours apart, failed all three attempts and turned a run red over a browser nobody was installing. Made a failed update warn and carry on, leaving apt-get install as the gate. Nothing is weakened by that: the install still exits on a package it cannot find, so an unreachable archive still stops the script, one step later and naming the package it could not get, which is a better diagnostic than a hash mismatch in a repository nobody asked for. Disabling third-party sources before updating would keep the update strict, but this script also runs on a contributor's own machine, and rewriting someone's apt configuration to suit CI would be worse than tolerating a stale index for an archive we do not read. Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-09 14:27:02 -04:00
3 people	4d90a0c21c	Stopped the win32 and win64 ports from enabling performance metrics and event trace (#676) ... * win32: do not always enable trace or performance metrics in tx_port.h if these are required they can be enabled in tx_user.h * win64: do not always enable performance metrics in tx_port.h if required they can be enabled in tx_user.h * Removed the disabled blocks rather than commenting them out The win32 and win64 ports were the only two that turned performance metrics on for the application, and win32 the only one that turned event trace on. Leaving those to tx_user.h is right: the symbols extend the control blocks, so a port that sets them behind the application's back changes structures the application also sees. The blocks were disabled with #if 0 rather than deleted. That is the form MISRA C:2012 Directive 4.4 is about -- sections of code should not be commented out -- and it leaves two copies of a list that now has no reader. They are removed, and a short note in their place says where the symbols belong and why the port does not set them. No behaviour change beyond what this pull request already made. Checked that the preprocessor nesting in both headers is still balanced. Worth recording for whoever looks next: with this in, no port defines either symbol. The linux port carries the same list commented out, which reads at a glance like a third case but is not one. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> --------- Co-authored-by: r <r@r> Co-authored-by: Frédéric Desbiens <frederic.desbiens@eclipse-foundation.org>	2026-09-09 13:39:13 -04:00
Akif EjazandFrédéric Desbiens	40db27e843	riscv32: spec compliance and regression test fix (#691) ... * riscv32: spec compliance and regression test fix Signed-off-by: Akif Ejaz <akifejaz40@gmail.com> * Derived the RISC-V32 frame sizes from the port contract in one place tx_port.h published TX_RISCV_TRAP_FRAME_SIZE for the GNU BSP assembly, but nothing in the port consumed it. Six .S files each rebuilt the same numbers from their own #if, so the interrupt frame size was written out in seven places and the solicited frame size in three. That is the shape that produced the RISC-V64 fault fixed in #708, where the port moved to a padded frame and one copy of the constant did not. The sources now include tx_port.h and take both sizes from it, and no literal frame size remains in the port. TX_RISCV_SOL_FRAME_SIZE joins the contract, since the solicited frame was never published at all. The emitted code is unchanged: 400 and 176 bytes for ILP32D, 128 for soft-float, confirmed by disassembly before and after. Two further corrections: _tx_initialize_low_level carried .global immediately followed by .weak, so the symbol stayed weak and the .global did nothing. Weak is what the port wants, because the example and regression BSPs both provide their own definition, so the stray .global is removed rather than the .weak. Verified with nm that the symbol is still W. The QEMU runner seeded fpu_verified from skip_fpu, so a soft-float run satisfied the FPU gate whether or not the script ever reported the skip. It now starts false and is set only when the skip marker is present, so a run that dies before reaching that point fails instead of passing. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> --------- Signed-off-by: Akif Ejaz <akifejaz40@gmail.com> Co-authored-by: Frédéric Desbiens <frederic.desbiens@eclipse-foundation.org>	2026-09-09 11:40:05 -04:00
Frédéric Desbiens	3fc28d8979	Allowed a BASEPRI-masked interrupt to wake the Cortex-M idle loop from WFI (#711) ... The idle loop in _tx_thread_schedule masks interrupts before re-reading _tx_thread_execute_ptr, so that an interrupt cannot make a thread ready between that read and the WFI and then be lost. With PRIMASK that is safe: the architecture excludes PRIMASK from the WFI wake-up condition, so the interrupt still wakes the processor and is taken as soon as the loop re-enables interrupts. BASEPRI is not excluded. When TX_PORT_USE_BASEPRI is defined, the mask written at the top of the loop is still in place at the WFI, so any interrupt at or below TX_PORT_BASEPRI fails to wake the processor at all. On a system where every interrupt is managed by ThreadX, that is every interrupt, and the processor stays in WFI or in the low power mode entered by tx_low_power_enter until something outside the mask happens. Set PRIMASK and clear BASEPRI for the duration of the WFI, then restore BASEPRI and clear PRIMASK. Interrupts remain masked across the whole window, so the original race is still closed, but the wake-up condition is now evaluated with BASEPRI clear and any enabled interrupt can end the wait. A pending interrupt is taken at the CPSIE i, or at the existing unmask further down the loop if it falls below TX_PORT_BASEPRI. The change is made in the ARMv7-M and ARMv8-M sources under ports_arch, including the module manager, and propagated to the generated ports with the copy scripts. The ghs and keil ports do not implement TX_PORT_USE_BASEPRI, and Cortex-M0/M0+/M23 have no BASEPRI register, so those ports are unaffected. Verified by assembling every patched GNU port for Cortex-M3, M4, M7, M33, M55 and M85, with and without TX_PORT_USE_BASEPRI, TX_LOW_POWER and TX_ENABLE_EXECUTION_CHANGE_NOTIFY, and by checking the disassembly of the idle loop. Fixes #279 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-09 11:29:14 -04:00
Frédéric Desbiens	146d57b235	Fixed the RISC-V64 trap frame size mismatch in the regression test BSP (#708) ... The RISC-V64 port moved its interrupt frame to 528 bytes (65 slots plus 8 bytes of padding, so sp stays 16-byte aligned at a call) and published the size as TX_RISCV_TRAP_FRAME_SIZE. The port sources were converted to use it, but the shared regression test BSP was not: its trap_entry still allocated a hardcoded 65 * REGBYTES, or 520 bytes. Every interrupt therefore unwound 8 bytes more than it allocated: trap_entry: addi sp,sp,-520 _tx_thread_context_restore: addi sp,sp,528 On the RISC-V64 regression suite that left 24 of 95 tests failing in the default configuration, typically as an illegal instruction once execution reached a corrupted frame. The example BSP under the port directory was converted with the port and was unaffected, which is why the functional QEMU test kept passing. The test BSP now takes both frame sizes from the port it is linked against, so the two cannot drift apart again. A port that publishes no contract keeps the historical layout, so the RISC-V32 side is unchanged until its own port publishes one. TX_RISCV_TRAP_CALL_FRAME_SIZE is restored to the RISC-V64 tx_port.h. It was removed as unused when the frame sizes were introduced, but it is part of the same contract: it is the space a trap entry reserves around a call into C, and the psABI requires 16 bytes there rather than one register slot. Verified on QEMU with every linkable test built, comparing against the commit before the port change: before the port change 2 failures out of 95 (both unlinkable) current dev 24 failures out of 95 with this change 2 failures out of 95 (both unlinkable) The two remaining failures predate all of this: newlib pulls _impure_ptr out of R_RISCV_HI20 range for time(), so those two binaries do not link. RISC-V32 is unchanged at 2 failures across all five configurations. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-09 10:56:57 -04:00
Frédéric Desbiens	d3fb72b6dd	Aligned the simulator ports' fake stack pointer so ThreadX no longer performs misaligned ULONG accesses (#705) ... The Linux, Win32 and Win64 simulation ports build a fake initial stack pointer by subtracting a fixed 8 bytes from tx_thread_stack_end. That field addresses the last byte of the thread's stack area, so it is one less than an aligned address and the resulting pointer is misaligned by construction, no matter how well aligned the stack the application supplied was. Two ULONG accesses then use that pointer. _tx_thread_stack_build() itself clears the word below it, and _tx_thread_create() copies it into tx_thread_stack_highest_ptr, which TX_THREAD_STACK_CHECK dereferences on every suspend and resume when TX_ENABLE_STACK_CHECKING is defined. Both are undefined behaviour. They happen to work on x86 but are reported by GCC's undefined behaviour sanitizer, and would fault on a host that requires natural alignment. The fake stack pointer is now rounded down to a ULONG boundary, which leaves it inside the stack area and makes both accesses aligned. Verified by building the Linux port with -fsanitize=undefined and running the demo: the two reported diagnostics are produced before the change and neither appears after it. The tx and smp regression suites pass, 98 and 114 tests respectively. Fixes #218 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-09 09:34:33 -04:00
Akif EjazandFrédéric Desbiens	164f211a01	riscv64: spec compliance and regression test fix (#698) ... * spec compliance Signed-off-by: Akif Ejaz <akifejaz40@gmail.com> * revert the demo changes Signed-off-by: Akif Ejaz <akifejaz40@gmail.com> * Restored the FPU demo hook so the RISC-V64 functional test can pass The new check-functional-riscv64 target verifies FPU context switching by watching fpu_test_val advance by 1.1f on each pass through thread_6_and_7_entry. The GDB script deliberately treats a missing symbol as a failure rather than silently skipping the check, but the demo no longer defined it, so the target failed on every run: FPU_VERIFIED_FAIL_NO_SYMBOL The definition and the increment are restored, matching what the risc-v32 demo already carries. The functional target now passes end to end. Three small corrections are folded in: - tx_port.h carried a comment stating that the ISA string must include Zicsr, but nothing enforced it, so an rv64imac build failed with a wall of assembler "unrecognized opcode" errors. It now stops at one clear diagnostic. - Removed TX_RISCV_TRAP_CALL_FRAME_SIZE, which nothing referenced. - The example .gitignore listed qemu-riscv32.log, but the runner writes qemu-riscv64.log, so the generated log showed up as an untracked file. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> --------- Signed-off-by: Akif Ejaz <akifejaz40@gmail.com> Co-authored-by: Frédéric Desbiens <frederic.desbiens@eclipse-foundation.org>	2026-09-09 09:26:11 -04:00
Frédéric Desbiens	945f5f5caa	Moved the ARC ISR enter callout onto the system stack (#700) ... _tx_thread_context_save() calls _tx_execution_isr_enter when TX_ENABLE_EXECUTION_CHANGE_NOTIFY is defined. On the path where an interrupt preempted a running thread, that call was made before the switch to the system stack, so the 32-byte call frame and the whole stack footprint of the callout were taken from the interrupted thread's stack, on top of the 160-byte interrupt frame the port had already allocated there. The callout is supplied by the application, so its stack usage is not bounded by ThreadX, and it is charged to every thread that happens to be running when an interrupt arrives. The two other callout sites in the same routine, the nested save and the idle system save, already run on the system stack, as does the _tx_execution_isr_exit call in _tx_thread_context_restore. _tx_thread_schedule was reordered in 6.1.9 so that _tx_execution_thread_enter runs on the system stack rather than the thread stack; the same reorder was never applied to the context save. The switch to the system stack now happens before the callout in the ARCv2_EM, ARC_HS and SMP ARC_HS ports. _tx_thread_context_fast_save is unchanged because the fast interrupt path never switches stacks by design. Fixes #149 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-08 15:42:39 -04:00
Frédéric Desbiens	d7789f0b12	Fixed the clobbered return address in the RISC-V context save (#696) ... _tx_thread_context_save() returns to its caller with ret, which uses the return address held in ra. When TX_ENABLE_EXECUTION_CHANGE_NOTIFY was defined, the call to _tx_execution_isr_enter overwrote ra with the address of the instruction following the call, so the subsequent ret returned into _tx_thread_context_save itself instead of the interrupt service routine. The return address is now saved on the stack around the call and recovered afterwards, which is the same idiom already used by the Arm ports. The fix covers all three affected paths (nested save, thread save and idle system save) in the risc-v32 GNU, risc-v32 IAR and risc-v64 GNU ports. Fixes #348 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-03 14:17:49 -04:00
Frédéric Desbiens	508af549da	Fixed the incorrect loop bound constant in the IAR file lock support (#695) ... The IAR multithreaded library support code allocates its file lock mutexes from an array of _MAX_FLOCK entries, but the wrap-around check and the exhaustion check in __iar_file_Mtxinit() both compared against _MAX_LOCK, the bound of the unrelated system lock mutex array. When _MAX_FLOCK is greater than _MAX_LOCK, the free mutex index wrapped early and the exhaustion check reported failure while free entries remained, so *m was set to TX_NULL and the application faulted the first time a file lock was taken. When _MAX_FLOCK is smaller than _MAX_LOCK, the free mutex index was allowed to run past the end of __tx_iar_file_lock_mutexes and the exhaustion check could never fire. Corrected all four comparisons in each of the 27 copies of tx_iar.c. Fixes #444 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-03 13:50:31 -04:00
Frédéric Desbiens	c469a7756b	Fixed the missing immediate prefix on MOV in Cortex-M schedulers (#693) ... The BASEPRI-masking path in tx_thread_schedule wrote "MOV r0, 0" rather than "MOV r0, #0". UAL requires the "#" prefix on an immediate operand. GNU as and the LLVM-based assemblers accept the unprefixed form and emit the intended encoding, but stricter assemblers reject it outright, so the affected ports could not be built with those toolchains. The GNU and AC6 sources had already been corrected; this brings the IAR and AC5 sources into line. Verified that both spellings assemble to the same Thumb-2 encoding (f04f 0000), so this is a source-correctness fix with no change in generated code or runtime behaviour. Covers 31 occurrences across the Cortex-M3, M4, M7, M33, M52, M55 and M85 ports, their module manager counterparts, and the shared ARMv7-M and ARMv8-M architecture sources. Fixes #461 Assisted-by: Copilot (Opus 5) <noreply@github.com>	2026-09-03 11:44:27 -04:00
Frédéric Desbiens	13c8c768c7	Added the boot-at-EL1 option to the S32Z280 entry path (#690) ... The Armv8-R AEM FVP entry path has carried TX_R52_BOOT_AT_EL1 since it was written, for the case its own comment describes: "an earlier boot stage or a vendor EL2 monitor has already dropped privilege to EL1". This board's entry path did not, so a kernel could not be built as a guest on it at all -- and it is the board where that matters most, because it is the one with silicon behind it. The bracket is the whole change. Everything from the Thumb reset trampoline to the ERET goes inside #ifndef TX_R52_BOOT_AT_EL1, and the #else supplies a one-instruction A32 _start that branches to el1_entry. A32 AND NOT T32, which is the one real difference from the standalone entry. The core resets in Thumb state here because the RTU boot instruction NXP plants is a T32 branch, but a guest is not reached by reset: it is reached by the monitor's ERET, and the monitor chooses the state through SPSR.T. Get the two out of agreement and the guest dies on its first instruction with an undefined-instruction exception, which looks exactly like a bad entry address and sends the reader to the loader instead of to the ERET. WHAT THE MONITOR INHERITS is enumerated at the #ifndef, next to the code it replaces rather than in a document, because that is where somebody adding a third board will be looking. This board's EL2 block is considerably larger than the model's, and each item on the list is something a guest at EL1 provably cannot do rather than something it merely does not: CNTFRQ is writable only at the highest implemented exception level and reads zero out of reset; HCPTR.TCP10/TCP11 reset set, trapping every EL1 floating-point access; HSCTLR.TE is an EL2 register (SCTLR.TE is EL1's, and el1_entry still clears it below); ICC_HSRE.SRE makes every other ICC_* and ICH_* register exist at all; the low-latency peripheral port enables reset to zero and an EL1 write to that register traps to EL2; and the TCM enables are per-core with ENABLEEL2 SILENTLY IGNORED from EL1 -- measured on both BTCM and CTCM, the base took and bit 0 took while bit 1 stayed clear. CNTHCTL.PL1PCTEN and PL1PCEN are the deliberate omission from that list, and the note says why. This path opens both, because a standalone kernel owns the physical timer. A monitor that TIME-partitions its guests must not: a partition's physical time keeps running while it is descheduled, so a guest reading it can observe that it was not running. That is the monitor's decision rather than this file's, which is why the list says what a guest cannot do rather than what a monitor should. Verified both ways. The three standalone images build and link unchanged, and a kernel built with the option boots at EL1 on a S32Z280-594EVB under an EL2 monitor, runs two threads through a queue and a semaphore, and reports back -- with no other change to the kernel or to its port. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-02 19:08:24 -04:00
Frédéric Desbiens	57390fc0fe	Refused the Cortex-R52 VFP option without a hard float ABI (#686) ... TX_R52_ENABLE_VFP with the default soft float ABI cannot build. The option defines TX_ENABLE_VFP_SUPPORT, which enables the VMRS, VSTMDB and VLDMIA blocks in the port assembly, and -mfloat-abi=soft leaves the assembler with no FPU to accept them. The configuration fails with eight errors of the form tx_thread_system_return.S:118: Error: selected processor does not support `vmrs r4,FPSCR' in ARM mode none of which mentions the float ABI, so a user has to reason from VMRS back to the option that enabled it. The guard that exists said otherwise. It warned that "the compiler will not emit floating-point instructions, so the VFP context path will never be exercised", which describes a build that succeeds and is merely pointless -- and then let configure finish, so the warning scrolled past well before the assembler errors appeared. It is now a FATAL_ERROR that names the fix, which is what the same file already does six lines above for TX_R52_ENABLE_FIQ_NESTING without TX_R52_ENABLE_FIQ. That combination is rejected for being "meaningless", while this one, which cannot assemble at all, was only warned about. The severities were the wrong way round. The option's definition also moves below the check, so the block reads like the FIQ nesting one. The ABI is not promoted to hard automatically. TX_R52_FLOAT_ABI is a cache variable the user may have set deliberately, and silently overriding an explicit choice is worse than refusing a combination that cannot work. readme_threadx.txt carried the same claim, and its option list marked the FIQ nesting dependency inline but not this one. Both corrected. No regression test. Nothing in the tree asserts a configure-time failure -- there is no harness for it, and the sibling FIQ nesting guard has none either -- so a test for this would have to introduce that mechanism for one case. Verified by hand in both directions instead: the soft-ABI combination now stops at configure with the message above, and the hard-ABI feature build (VFP, FIQ, IRQ nesting, FIQ nesting) builds its eight images clean and passes ctest 8/8 on the Armv8-R AEM FVP. scripts/check_gcc.sh passes unchanged; it configures the Cortex-R52 CMake stage without TX_R52_ENABLE_VFP, so the new branch is not on its path. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-09-01 08:48:20 -04:00
Frédéric Desbiens	5b94bad6a2	Fixed the AArch64 samples, none of which had ever linked with GCC (#673) ... Every AArch64 gnu example build failed at the sample link, all 27 of them -- 13 under ports/ and 14 under ports_smp/: libg.a(libc_a-init.o): in function `__libc_init_array': undefined reference to `_init' relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `_init' libg.a(libc_a-fini.o): in function `__libc_fini_array': undefined reference to `_fini' build_threadx_sample.sh links with -nostartfiles, which is correct for a port carrying its own reset path, and that drops crti.o and crtn.o along with everything else. startup.S calls __libc_init_array by design, and newlib's implementation calls _init, which crti.o is what defines. The AArch32 scripts are unaffected: they use nosys.specs and never reach __libc_init_array. The fix links crti.o and crtn.o explicitly, bracketing the object list -- the first must precede every .init contribution and the second must follow all of them, so their position is load-bearing rather than stylistic. Both paths come from the compiler's own -print-file-name, so nothing here hard-codes a toolchain layout. The atfe branch sets both to empty, deliberately: picolibc's __libc_init_array does not call _init, those 27 images link today, and adding crti.o would change a working link for no reason. That is also why check_clang.sh is green on these and does not list them as expected to fail -- the LLVM path never reached the gap, so nothing has ever linked them and failed. Fixed in ports_arch/ARMv8-A/threadx/ports/gnu/example_build, which is the single source for both the ports/ and ports_smp/ copies, then regenerated with update.sh --port-sets tx,tx_smp. The 27 generated copies are in this commit because ports_arch_check compares them. Verified: all 27 link with arm-gnu-toolchain 14.3.rel1 aarch64-none-elf, where 0 of 27 did before; _init and _fini disassemble to the expected crti prologue and crtn epilogue over a ret; check_clang.sh with ATfE 22.1.0 is still green on all five stages, including the 42 script-driven example builds; check_ports.sh is green including the reproducibility check. No regression test: these are link-only example images that no host test executes. What guards them is check_clang.sh's example stage today, and check_gcc.sh's, which is the next change and is the reason this was found. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-28 09:26:12 -04:00
Frédéric Desbiens	ca62edd27d	Swept the stack-heavy measurement across placements, and qualified its result (#638) ... #636 reported that a stack in BTCM gave a threefold tighter spread than DRAM0 for stack-heavy work. That measurement used a single code placement, which is the methodology #631 and #633 exist to correct: the cache benchmark got an alignment sweep and the interrupt handler got one, and this measurement never did. It was noticed when #637 added two threads to the same image and the figure moved -- both spreads came out near 6500 and the minima rose 15%. The recursive body is now generated at four placements and all four are measured, per placement, in one image. placement BTCM min / spread DRAM0 min / spread offset 0 41854 / 6850 42036 / 6880 offset 16 48670 / 1946 48792 / 1978 offset 32 42388 / 6914 42752 / 7018 offset 48 48914 / 1860 49198 / 6786 Reproducible across runs to within a few hundred cycles. Spread is dominated by code placement rather than by the memory holding the stack. It ranges from 1860 to 6914 depending on where the body falls in a cache line, and placement also moves the minimum by 17%, from 41854 to 49214. Against that, the memory contributes a consistent but small advantage: BTCM's minimum is lower at all four placements, by 0.4% to 0.9%. BTCM's spread beats DRAM0's decisively at one placement of the four, offset 48, at 1860 against 6786. At the other three the two are within 2% of each other. So the effect #636 reported is real where it occurs and is not a property of the part: quoting it as one invited the reader to expect it everywhere. #636's claim should be read as qualified by this. A stack in BTCM buys a small consistent improvement in the best case and a large improvement in spread at some code placements and not others. Anyone building a determinism argument on it needs the placement sweep in the loop, not a single figure. The pad nops that displace each placement execute on every recursion level rather than once, so each placement carries a slightly different constant cost, about 0.6% at the widest. That cancels in the BTCM against DRAM0 comparison, which is made at the same placement, and does not affect spread within one. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-18 08:51:49 -04:00
Frédéric Desbiens	1ef49338e9	Gave each thread its own MPU window, and made a violation fault (#637) ... First step towards a ThreadX module port for this core: establish that PMSAv8-R regions can be switched per thread on this part, what that costs, and that a violation actually faults. Those are the questions worth answering before writing a module manager on top of them. Two threads each own a 4 KB window at the top of DRAM2. The windows are carved out of the broad data region in mpu.c, because isolation is only meaningful in memory no other region already covers -- every other region in that map is a wide RW window, so a private buffer inside one of them would be reachable by every thread whatever else was programmed. Each thread writes its own window, which must succeed, and then reaches for the other thread's, which must fault. The second half is the part that matters: a test that only shows a thread reaching its own memory would pass just as well with no protection at all. Measured on the S32Z280-594EVB, reproducible across three runs: thread 0 window 0x3187E000 own: reachable other: faulted thread 1 window 0x3187F000 own: reachable other: faulted region switch cost: 562 to 604 cycles The cost is worth noting for the module port to come. A context switch on this part is about 1400 cycles, so switching one region adds roughly 40% to it, and most of that is the dsb and isb rather than the register writes. A module switch programming several regions should therefore batch the barriers once at the end rather than per region. Scope, stated plainly. The window is applied by the thread calling thread_mpu_activate, not by the scheduler. The port's scheduler does call _tx_execution_thread_enter under TX_ENABLE_EXECUTION_CHANGE_NOTIFY, which would make it automatic, but that macro is read by port assembly compiled into the shared threadx library, so enabling it would oblige all nine example targets in this port to supply the four execution hooks. A ThreadX module port carries its own copies of the port assembly for exactly that reason, and that is where the switch belongs. There is no user mode, no syscall boundary and no loader here. The fault is survivable the same way the boot probes make it survivable: fault_expected tells the data abort handler to record the violation and resume after the faulting access. That works in thread context because the handler returns where it came from rather than to a fixed recovery point. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 17:59:12 -04:00
Frédéric Desbiens	f535a4ec67	Measured stack-heavy work against the memory holding the stack (#636) ... #635 found BTCM worth about 7.4% on a context switch with no determinism advantage, and said why: a switch saves sixteen registers, roughly one cache line, so the stack's cache state has almost nothing to contribute. It named the interesting case as work with a large stack working set, said it had not been measured, and said it should not be assumed. This measures it, and the answer inverts the earlier one. deep_touch recurses 24 frames, writing a frame on the way down and reading it on the way up, so the working set is the whole descent. The cache is cleaned and invalidated before each sample, so every descent starts cold. Two threads, one stack in BTCM and one in DRAM0, no partner threads and no relinquish: the timed region is entirely within one thread. Reproducible across runs: min mean max spread stack in BTCM 42868 43031 44890 2020 stack in DRAM0 42982 43291 49842 6860 The mean is the same to within 0.6%. The worst case is 10% lower for BTCM and the spread is 3.4 times tighter. No sample in either configuration exceeded twice the minimum, so these maxima are the workload rather than a timer tick -- which is the mistake that produced a false jitter result in #635 and is why the count of interrupted samples is printed. Put beside #635 the two measurements say opposite things and both are true. For a context switch, a small footprint touched every time, BTCM buys throughput and no determinism. For stack-heavy work, a large footprint touched once, it buys determinism and almost no throughput. The reason is that this workload is compute bound at the optimisation level this BSP builds at: 43000 cycles for 24 frames is dominated by call and loop overhead, so line fills are a few percent of the total and barely move the mean. What they do is vary, and that variance is what a bank with no cache in the path removes. So the determinism argument for TCM holds here, but it is worth 10% of worst case and a threefold narrowing of spread, not an order of magnitude. Anyone citing this in a safety argument should cite those numbers and not a larger claim. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 17:26:08 -04:00
Frédéric Desbiens	367d91880b	Measured context-switch cost against the memory holding the stack (#635) ... #634 placed a thread stack in BTCM and deliberately claimed no timing benefit, because none had been measured. This measures it. Two pairs of equal-priority threads hand control back and forth with tx_thread_relinquish. One pair has both stacks in BTCM, the other in DRAM0, and the measuring thread of each pair times the round trip in PMU cycles. Both pairs run in one image from one copy of the measuring code, which is what makes the comparison safe: the alignment trap that invalidated earlier work here bites when two builds with different layouts are compared, and a code shift moves both pairs equally. Reproducible to the cycle across runs: min mean max BTCM stacks 1370 1379 1402 DRAM0 stacks 1476 1480 1508 BTCM is about 7.4% faster, or 110 cycles on a round trip of two switches. Three findings that bound the claim, and the last one deflates it. The figure holds whether the cache is warm or cold. Cleaning and invalidating the data cache before every timed switch costs both configurations about 40 cycles and leaves the gap at 7.4%: warm it is 1334 against 1440, cold 1370 against 1476. So the advantage comes from BTCM's zero wait states, not from avoiding cache misses. That is because a context switch touches almost no stack -- sixteen registers, about one cache line -- so the stack's cache state has little to contribute either way. TCM should matter much more for threads with deep call chains or large locals, where the stack working set is big enough for cache state to dominate. That is not measured here and should not be assumed. There is no determinism benefit visible in this test. Excluding preempted samples, jitter is 32 cycles for BTCM and 28 to 34 for DRAM0 -- comparable, not better. A first version of this measurement appeared to show BTCM with 16 times less jitter, and that was wrong: max was reporting whichever pair a timer tick had landed on. Across three runs the outlier appeared in the BTCM pair once and the DRAM0 pair twice. Samples past 2000 cycles are now counted separately and excluded from min, mean and max alike, and the count is printed so the reader can see how many there were. Also tried and discarded: loading the partner thread with a cache walk to create pressure. The timed round trip includes the partner, so the walk dominated every sample and put all 256 past the outlier threshold. The per-sample flush replaced it and sits outside the timestamps. The demo also starts the PMU cycle counter, which bsp_boot.c does for the probe image and this image never ran. Without it every reading would have been zero, which reads as a free context switch rather than as a dead counter. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 17:08:29 -04:00
Frédéric Desbiens	62e966f6bf	Enabled BTCM, measured it, and put a ThreadX thread stack in it (#634) ... * Enabled BTCM and measured what it offers as a data store BTCM was disabled because of a regression that turned out not to exist; the claim was retracted in the previous commit. It is enabled now, and this measures why that is worth doing: 16 KB at zero wait states, where ATCM has one, and no cache in the path at all. Enabling it needs three things, all of which existed for ATCM already: the region register write at EL2, an MPU region, and an ECC preload before any read (TRM 6.2.2). BTCM accepts 32-bit stores where ATCM needs 64-bit, which tcm_preload already handles. The cache benchmark now sweeps three memories rather than one, four loop alignments each. At the alignments where the loop is not instruction-fetch bound: memory cold (uncached) warm (cached) gain DRAM2 half-speed 857,540 651,436 24.0% DRAM0 full-speed 797,824 651,297 18.3% BTCM zero wait 694,689 651,369 6.2% Three things follow. Warm times are identical across all three memories, within 0.02%. Once the data cache is working the backing store barely matters, because the working set fits in it. Cold times rank as the reference manual predicts: BTCM fastest, then DRAM0, then DRAM2 at half the core frequency (S32Z2 RM 6.3.6). BTCM still shows a 6.2% gain when the caches are enabled, and that cannot be the data cache, because an enabled TCM is Non-cacheable Non-shareable Normal memory whatever the MPU says. It is the instruction cache on the timing loop. This probe has always measured both caches together; three memories side by side is what makes that visible. The number that matters for placing data in BTCM: uncached BTCM is within 6.6% of the best cached case, where uncached DRAM0 is 22% off it. Data in BTCM runs at close to cache-hit speed with no cache to miss, which is the determinism argument stated as a measurement rather than an assertion. DRAM2's sweep is unchanged with BTCM enabled, 0 and 0 and 240 and 240, which independently confirms the retraction. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> * Put a ThreadX thread stack in BTCM The code side of TCM was done in #630; this is the data side. One of the demo's three thread stacks now lives in BTCM and the other two stay in DRAM0, so a run exercises both paths and a mistake in either shows up. link.lds gains a BTCM region and a .btcm_bss NOLOAD section, so a stack is an ordinary C array with a section attribute and the linker checks it fits, rather than a hardcoded address that silently overflows the bank. entry.S preloads the whole bank at EL2, and that is not optional. ECC is enabled on this part, so a TCM location must be written before it can be read (TRM 6.2.2), and a stack is read before the program writes it -- the first context restore pops what tx_thread_create built into it. The preload has to happen before any C runs, because the demo images do not run bsp_boot.c, which is where the ATCM preload lives. 32-bit stores suffice for BTCM where ATCM needs 64-bit. Why BTCM for a stack: 16 KB at zero wait states where ATCM has one, and never cached whatever the MPU says about it. Measured in the previous commit, uncached BTCM comes within 6.6% of the best cached case while uncached DRAM0 is 22% off it, so stack access runs at close to cache-hit speed without depending on a line being resident. That is the property a determinism argument needs. What this commit does not claim: no thread-level timing improvement has been measured. The case for BTCM here rests on the memory characterisation and on removing the cache from the path, not on a measured context-switch figure. That measurement is worth doing and has not been done. Verified on the S32Z280-594EVB. The demo reports its stack addresses so the placement is visible rather than implied -- sleeper at 0x30100000 in BTCM, spinner and judge in DRAM0 -- and passes with 100 ticks, 20 sleeper wakeups and 20 preemptions, so a real thread schedules, preempts and context-switches on a tightly-coupled-memory stack. The boot image still passes six of six probes. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 16:33:55 -04:00
Frédéric Desbiens	35de56853c	Retracted the claim that a second TCM bank costs the data cache (#633) ... entry.S and readme_s32z280.txt both stated that enabling any second TCM bank removes all measurable data-cache benefit on this part, and gave five configurations as evidence: ATCM alone at a 24% cache gain, four combinations involving a second bank at none. Both concluded the cause was not a particular bank, not its address and not the ECC preload, but enabling a second bank at all. Both cited the Cortex-R52 and S32Z2 errata as not covering it and offered a shared RAM pool between the LLC and the TCMs as an explanation. A defect report went to NXP on that basis. It was an artifact of the benchmark. That benchmark was bimodal with respect to where its timing loop fell inside a 64-byte cache line, reporting either 24% or nothing at all for identical silicon, and every one of those five configurations was an edit to entry.S, so every one shifted the code that followed and moved the loop between modes. Adding two nop instructions reproduces the "second bank" figure exactly, to the digit. The report to NXP has been withdrawn. Re-measured with the alignment sweep added in #631, one bank and two are indistinguishable: loop offset in line ATCM only ATCM + CTCM 0 gain 0 gain 0 16 gain 0 gain 0 32 gain 240/1000 gain 240/1000 48 gain 240/1000 gain 240/1000 So enabling a second bank costs nothing measurable. The banks stay disabled, but for the ordinary reason that nothing in this example uses them, and both texts now say that instead. Enabling one is a single line, with the ECC preload before any read (TRM 6.2.2) and an MPU region as the only prerequisites, both already handled for ATCM. The readme also now states the general point, which outlasts the TCM detail: a single-figure timing result from this example cannot be compared across builds unless the timed loop's alignment is controlled, because almost any change shifts code. Comments and documentation only; no generated code changes. Verified on the board regardless, since entry.S was touched: six of six probes pass and the sweep is unchanged. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 13:46:33 -04:00
Frédéric Desbiens	3aaaa6700d	Revalidated the ATCM handler result across four placements, and it holds (#632) ... The handler comparison in #630 measured one alignment, which is the mistake that made the cache benchmark in this example report 24% or 0% for identical silicon. The handler body is now generated at four offsets within a cache line, all four are measured, and the figures are reported per placement. The claim survives. Mean cycles for the handler body: loop offset code RAM ATCM 0 523 383 16 534 377 32 539 375 48 521 383 ATCM is faster at every placement, by about 28%, and the two sets of means do not overlap. Worst case improves as well, 510 against 694. Two things worth recording beyond the headline. The handler measurement is only mildly alignment sensitive, 3.5% across placements in code RAM and 2% in ATCM, quite unlike the cache loop's two modes. So this comparison was less fragile than the cache one, and #630's direction was right even though its method was not defensible. The absolute numbers differ from #630 because the body now sits behind a placement wrapper that adds a call; the comparison is internally consistent either way. Both variants also report identical cache sweeps, 0 and 0 and 240 and 240, which settles the regression this branch's predecessor appeared to show. That apparent regression was the single-alignment probe moving between its two modes, not anything about ATCM. One copy of the logic is kept: the wrappers inline a single always_inline implementation, so the four placements cannot drift apart. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 13:33:43 -04:00
Frédéric Desbiens	1d3f3f8e4c	Measured the cache benchmark at four alignments, because one is not enough (#631) ... This benchmark was bimodal and reported a single number, which made it worse than no benchmark. The same workload on the same silicon reports either 24% cache benefit or none at all, decided only by where the loop falls inside a 64-byte line -- and therefore by any unrelated change that shifts code ahead of it. Two nop instructions added to entry.S were enough to flip it. That is not a hypothetical. A run of conclusions drawn from this probe turned out to be measuring code layout: an interrupt-handler comparison, a claim that enabling a second TCM bank costs all cache benefit, and a follow-up claim that what mattered was when the TCM region register was written rather than what it contained. The last of those was reported to NXP as a defect and has had to be withdrawn. Enabling CTCM and adding two nops produce identical results, to the digit, because the only measurable consequence of the enable was the eight bytes of instructions it added. Four copies of the loop are now generated at different offsets within a cache line, all four are measured, and the low and high gains are both reported. Pinning a single alignment was tried first and is not a fix: it silently picks one of the two modes -- aligned to 64 the loop sits permanently in the low one. Measured on the S32Z280-594EVB, reproducing exactly across runs: loop offset in line cold warm gain 0 890,302 890,035 0% 16 890,208 889,976 0% 32 857,439 651,390 24.0% 48 857,631 651,571 24.0% The cold pass differs between the modes as well, 890k against 857k, so the loop is slower even with both caches off. The cold pass is instruction-fetch bound out of code RAM at half the core frequency (S32Z2 RM 6.3.6), and how the loop straddles lines decides how much of the data cache's contribution is visible at all. This probe therefore measures both caches together and always did; the sweep at least makes the variation visible instead of letting one arbitrary placement stand in for the part. C4 now passes if any alignment shows a 10% speedup, and says so explicitly when the low mode does not, so the sensitivity appears in the log rather than being discovered later. Verified: with the sweep in place, adding 0, 8, 12 or 20 bytes of nops to entry.S leaves the reported low and high gains unchanged. Before it, the same shifts read 24.0%, 0%, 0% and 0%. Also adds cache_disable_all, which the sweep needs: cache_enable was one-way, so a second cold reading in one run was impossible. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 13:14:16 -04:00
Frédéric Desbiens	b2983c08d3	Ran the interrupt handler from ATCM, and measured what that buys (#630) ... The TCM work so far enabled ATCM and left it empty, which buys nothing. This places code in it and measures the result. link.lds gains an ATCM region and an .atcm_text section whose run address is in the bank and whose load address is in CODE. tcm_copy_atcm_text moves it, using 64-bit stores because ECC is enabled on this part and ATCM requires them (Cortex-R52 TRM 6.2.2); both ends of the section are 8-byte aligned so there is no narrower tail to leave without check bits. The copy runs after T4 and T5, which write test patterns to the first and last words of the bank and would otherwise land on top of the code. s32z280_atcm.elf is the same image as s32z280_boot.elf with the interrupt service body placed in ATCM. Both targets exist so the comparison can be repeated on one board in one session without reconfiguring. The service routine is split into a timed wrapper that stays in .text and a body that moves, so the wrapper's own cost appears in both measurements and cancels. Measured in PMU cycles over 64 samples, caches enabled in both: code RAM ATCM change min 454 334 -26.4% mean 458 340 -25.8% max 612 466 -23.9% spread 158 132 -16.5% CNTPCT is not used for this: at 8 MHz it cannot resolve a handler body, let alone the variation in one. The level shift is the solid part. ATCM is a quarter faster even though the caches were on and code RAM had the instruction cache available, which says the handler does not stay resident between interrupts 10 ms apart -- so each one pays a cold fetch from code RAM, which runs at half the core frequency where ATCM runs at full speed with one wait state (S32Z2 RM 6.3.6). The determinism claim deserves less weight than the numbers first suggest. The spread narrows by only 16%, and ATCM's worst case still sits slightly above code RAM's best case, so the two distributions overlap at the tails rather than separating. Whatever jitter remains is not dominated by instruction fetch. Both images pass six of six boot probes. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 09:21:27 -04:00
Frédéric Desbiens	ff638dae71	Configured the LINFlexD console twice, because once is not enough at -O2 (#629) ... The console driver runs its configuration sequence a single time, and that works only because this BSP is built without an optimisation flag. Compiled at -O2 the same sequence leaves the line corrupted: every character partially wrong, in the pattern the file already describes for a misconfigured module. What makes it worth guarding against is that the failure is invisible. UARTCR reads back exactly the value written. LINIBRR and LINFBRR read back exactly the values written. linflexd_init returns LINFLEXD_INIT_OK. The registers are right and the line is wrong, so nothing in the returned status tells the caller the console cannot be trusted. Localised by bisection: with every other file at -O2 and this one at -O0 the output is clean, and with only linflexd_init at -O2 it is corrupted, so the fault is in the configuration sequence rather than in the per-byte transmit path. The mechanism is not understood, and this commit does not claim to explain it. Tested and rejected: a 100x larger bound on the wait for initialisation mode, a settling delay before the first LINSR read, a settling delay after leaving initialisation mode, a barrier and read-back between the two UARTCR writes, and waiting for LINSR to report the exit from initialisation mode. None of those makes a single pass work at -O2. A second pass does, at both optimisation levels, which is what this does. Instrumented with a duplicate of the sequence forced to -O2 and reported through a console repaired afterwards, which is how the register read-backs above were obtained. Verified on the S32Z280-594EVB. The boot image passes six of six probes with the console status still reporting 0x00000000, and the reproducer builds clean and prints correctly at both -O0 and -O2. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-17 07:59:23 -04:00
Frédéric Desbiens	0e7db2bf79	Stopped the generated Armv8-M readmes claiming a false origin date (#623) ... Every Armv8-M port readme ends with 09-30-2020 Initial ThreadX 6.1 version for Cortex-M85 using GNU tools. with the core name substituted in by scripts/copy_armv8_m.sh. The date is the shared port's, so each core inherits it whatever its own history: Cortex-M85 was announced in 2022 and its readme claims a 2020 origin, and any core added later gets the same treatment the moment its name joins the generator's list. The rest of the history block is accurate, since it records changes to the shared files. Only the closing line asserts something per-core. Reword it to describe the Armv8-M port itself, and say where a given core's real starting point is. Regenerating updates the twelve readmes for cortex_m33, cortex_m52, cortex_m55 and cortex_m85 across the three toolchains. Cortex-M52 makes the point: it arrived in #519 and its readme immediately claimed a 2020 origin for a core announced in 2023. The ARMv7-M templates say "Initial ThreadX version 6.1.7 for Cortex-M", with no placeholder to substitute, so they make no per-core claim and are left alone. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-16 08:42:53 -04:00
Armchina_JidongMeiandFrédéric Desbiens	090f8edc56	Added Cortex-M52 (Armv8.1-M) port (#519) ... * ports: add Cortex-M52 (Armv8.1-M) port support Add ThreadX port for Cortex-M52, supporting three toolchains: - GNU (GCC) - AC6 (Arm Compiler 6) - IAR Cortex-M52 is an Armv8.1-M Mainline processor sharing the same architecture profile as Cortex-M55 and Cortex-M85. The port is functionally identical to the existing Cortex-M85 port. * ports: update cortex_m52 port copy script,using it update content -Add cortex_m52 in threadx/scriprts/copy_armv8m.sh -Using updated copy_armv8m.sh to generate new cortex_m52 port content * Regenerated the Cortex-M52 port against dev and wired it into the checks The port was generated from ports_arch/ARMv8-M as it stood on master, which has since moved on. Rebasing onto dev and running scripts/copy_armv8_m.sh again brings the twelve stale files into line, which is the point of generating them: the core picks up every ARMv8-M fix made since without anyone porting it by hand. Among what it picks up: "MOV r0, 0" becomes "MOV r0, #0" in the schedule and system-return paths, the non-canonical immediate form that GNU as tolerates and LLVM's assembler rejects; and gnu/src/tx_initialize_low_level.S goes away, since the shared source no longer has it. Two integration points exist only on dev, so the original change could not have included them. cmake/cortex_m52.cmake, so the port can be selected the documented way. Every other Cortex-M core has one. It uses the hard float ABI, as Cortex-M55 and Cortex-M85 do. An entry in scripts/check_clang.sh, likewise with -mfloat-abi=hard. That flag is not decoration: -mcpu=cortex-m52 implies Helium, and building it soft-float ends in "multilib configuration error: No library available for MVE with soft-float ABI" on every file, which reads as a broken port rather than a missing flag. Verified after regenerating: scripts/copy_armv8_m.sh is a no-op, so the tree matches its source; all 14 assembly sources and 188 C sources compile for cortex-m52 with Arm Toolchain for Embedded 22.1.0. Note for anyone building with GNU tools: arm-none-eabi-gcc 13.2.1 rejects -mcpu=cortex-m52 outright. Support arrives in GCC 14. --------- Co-authored-by: Frédéric Desbiens <frederic.desbiens@eclipse-foundation.org> Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-16 08:29:46 -04:00
Frédéric Desbiens	09c190a71d	Added a CMake target for the Linux sample program (#622) ... The CMake build produced libthreadx.a and nothing else, so trying ThreadX on Linux meant using the Makefile beside the port instead. Build the demo the Makefile builds, for the linux port and its SMP counterpart. The target is behind an option that defaults off, so an ordinary build is unchanged and still produces just the library. -DTHREADX_SAMPLE=ON adds it: cmake -S . -B build -DTHREADX_ARCH=linux -DTHREADX_TOOLCHAIN=gnu \ -DTHREADX_SAMPLE=ON cmake --build build --target sample_threadx The include path uses TX_COMMON_DIR rather than naming common or common_smp, since the top level already resolves which of the two applies. Verified by building and running both variants. Non-SMP prints **** ThreadX Linux Demonstration **** (c) 1996-2020 Microsoft Corporation and SMP prints the SMP banner, both with the demo's thread counters advancing. A default configure with no THREADX_SAMPLE has no sample_threadx target and still produces libthreadx.a, so nothing existing moves. Derived from the two example_build files in #404 by Yanfeng Liu, which had the same goal. That change also rewrote the top level's SMP selection, added common_smp/CMakeLists.txt and added ports_smp/linux/gnu/CMakeLists.txt; all three have since arrived on dev by other routes, so only the sample targets were still missing. The include path needed adjusting because the original depended on THREADX_SMP being a string suffix, which it no longer is. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-15 17:28:33 -04:00
Frédéric Desbiens	1296cf1740	Corrected the S32Z280 data SRAM map against the Reference Manual and the part (#621) ... The RTU has 1 MB of data SRAM in three contiguous banks, and this port described it wrongly in both directions. DRAM0 0x31780000 256 KB full core speed DRAM1 0x317C0000 256 KB full core speed DRAM2 0x31800000 512 KB half core speed DRAM1 was not declared at all, so 256 KB of full-speed memory went unused and the linker's DATA region stopped at 256 KB. DRAM2 was declared as 2 MB when it is 512 KB, which mattered more: the MPU mapped 1.5 MB past the end of the bank, and that range aliases back onto its base. Anything placed above 0x31880000 would have shared storage with the bottom of the region silently -- no fault, two objects at one address. Nothing was placed there yet, so this was a trap rather than a live defect. Sources: S32Z2 Reference Manual Rev. 5, section 6.3.6 and Table 13, and the board. Writing distinct values to all three banks and reading them back shows 1 MB of independent storage, and the first word past DRAM2 returns the value written to its base, which is what fixes the size. Note that NXP's own debugger memory map, s32z2e2_memory_regions.py in S32 Design Studio, calls the last bank 2 MB. The Reference Manual and the silicon agree it is 512 KB. Also corrected the description of these banks throughout. They are all RTU-local; the earlier comments treated locality as the thing that distinguishes them, when the actual difference is clock speed. That is why the cache benchmark uses DRAM2 -- caching a bank that already runs at core speed shows nothing, which is a real effect the old wording explained with the wrong cause. Verified on the S32Z280-594EVB: builds clean, and the boot probes pass six of six with the MPU, GIC, interrupts, caches and both protection faults exercised. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-15 17:02:01 -04:00
Frédéric Desbiens	358e7a9ea5	Stopped the remaining example scripts naming archives that were deleted (#620) ... #618 fixed the arm9 and arm11 shell scripts, but not their .bat counterparts, and did not look at cortex_r4 and cortex_r5 at all. An audit of every build script against the files actually present in its directory found the rest. The .bat scripts for arm9, arm11, cortex_r4 and cortex_r5 still linked libc.a, libgcc.a and, for arm11, libnosys.a from their own example_build directories, and the cortex_r4 and cortex_r5 shell scripts did too. Those archives went in 6.1.10 under "Removal of unneeded files", so on Windows all four examples failed exactly as the shell versions did before #618, and on Linux the two R-profile ones still did. Link through the compiler driver, as the other examples have since #594. This does not make the examples link, and the change stops there deliberately. All four now fail the same way, undefined reference to `_fini' because their linker scripts define the .init and .fini sections but not the _init and _fini symbols, which live in crti.o and crtn.o and are omitted by -nostartfiles. Reviving four very old cores is separate work. Correct the comment on EXAMPLES_EXPECTED_TO_FAIL again. It had cortex_r4 and cortex_r5 failing for want of newlib multilib variants; they do not. All four share the single cause above, and the multilib explanation was wrong for the R-profile pair just as it was for arm9 and arm11. Verified by running each shell script: cortex_r4 and cortex_r5 fail on _fini rather than on missing files, matching arm9 and arm11. The .bat changes mirror link lines proven that way in the same directories; they cannot be run here. Three scripts are left alone and reported instead, because a blind edit could not be verified: ports_module/cortex_m3 and cortex_m4 have Windows-only .bat scripts that also name sources which are absent or differ in case, and ports_smp/mips32_interaptiv_smp needs a MIPS toolchain. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-15 16:58:59 -04:00
Frédéric Desbiens	20d4b977f2	Removed generated build output and per-user IDE state, and fixed two stale link lines (#618) ... * Removed generated build output and stopped two scripts naming deleted archives Three kinds of file in the tree are produced by a build rather than written by hand, and one pair of scripts still links archives that were deleted years ago. Keil writes ThreadX_Library.plg on every build; the two committed copies are HTML build logs from someone's machine. Code Composer generates the makefiles under ports/c667x/ccs/example_build/tx/Release from the project files beside them, so makefile, objects.mk, sources.mk, subdir_rules.mk, subdir_vars.mk and ccsObjs.opt are all regenerated output. The arm9 and arm11 sample builds link libc.a, libgcc.a and, for arm11, libnosys.a from their own example_build directories. Those archives were removed in 6.1.10 under "Removal of unneeded files", and libnosys.a in #594, but the link lines were never updated, so both examples fail immediately with arm-none-eabi-ld: cannot find libc.a: No such file or directory Link through the compiler driver instead, the shape every other example in the tree uses since #594: the driver supplies libc and libgcc, and SYSCALL_LIB is already defined in both scripts. That does not make either example link, and the fix stops short of that on purpose. With the archives no longer named, both now fail on undefined reference to `_fini' because their linker scripts define the .init and .fini sections but not the _init and _fini symbols, which live in crti.o and crtn.o and are omitted by -nostartfiles. Making those two old cores build is a separate question from removing a stale reference, so they stay in EXAMPLES_EXPECTED_TO_FAIL, with the comment there corrected: it blamed newlib multilib packaging, which is true of cortex_r4 and cortex_r5 but was never the reason for arm9 and arm11. Reproduced throughout with arm-none-eabi-gcc 13.2.1. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com> * Removed the Keil per-user state files and ignored them Every Keil project in the tree carried a second file holding per-user state: 25 .uvoptx beside the 25 .uvprojx, 9 .uvopt beside the 9 .uvproj, and 3 .uvgui multi-project workspace files. uVision rewrites all of them whenever a project is opened, so they record whoever last had it open rather than anything about the port: debugger selection, breakpoints, watch windows, window geometry. Nothing in the tree references them, and every affected directory keeps its .uvprojx or .uvproj, which is the file that actually describes the project. Add ignore rules so they do not come back the next time someone opens a project and commits. 1.4 MB across 37 files. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-15 16:40:19 -04:00
Frédéric Desbiens	b1a48824ea	Enabled ATCM on S32Z280, and left the other two banks off for a measured reason (#617) ... entry.S programs ATCM to 0x30000000 and enables it at both exception levels. This happens at EL2 deliberately: writing ENABLEEL2 from EL1 is silently ignored, which was measured on BTCM and CTCM -- the base took and ENABLEEL10 took while ENABLEEL2 stayed clear -- and the same write from EL2 sticks. tcm_enable() keeps ENABLEEL10 as its success criterion for the same reason, since requiring both would report failure for a bank that is usable at the level the caller runs at. Programming ATCM also moves it off address 0, where CFGTCMBOOTx leaves it, so a null-pointer write now faults instead of quietly landing in tightly-coupled memory. The boot image verifies rather than programs, preloads ATCM because ECC is enabled and the check bits are not initialised by the core, and proves the bank holds data both before the MPU is enabled and after. One MPU region covers it: the TRM requires a region before an enabled TCM can be used, and an enabled TCM always behaves as Non-cacheable Non-shareable Normal memory whatever the region says, so only the permissions there matter. BTCM and CTCM are left disabled, and that is a measurement rather than caution. Enabling any second bank removes all measurable data-cache benefit: ATCM only cache gain 24% ATCM + BTCM cache gain 0% ATCM + BTCM + CTCM cache gain 0% ATCM + BTCM at another base cache gain 0% ATCM + CTCM, BTCM disabled cache gain 0% Five configurations, one variable. Not a particular bank, not its address, and not the ECC preload: enabling a second bank at all. The benchmark buffer is in non-RTU-local SRAM at 0x31800000, outside every TCM window, and CCSIDR reports the same 16KB four-way cache throughout. I was wrong twice while narrowing this -- first blaming the preload, then blaming BTCM specifically -- and each was settled by a run rather than by argument. No erratum covers it. Checked the Cortex-R52 errata notice SDEN-857344 issue 19, all twenty-five entries, and the S32Z2 0P91J mask set errata, whose RTU and R52 entries are ERR050509, ERR051107, ERR051153, ERR051441, ERR051613, ERR051614 and ERR052126. A RAM pool shared between the RTU's last-level cache and the TCMs would explain it, the LLC being documented as allocating ways to specific domains, but that is a guess and it belongs with the other questions for NXP. Little is lost meanwhile. The reference manual describes TCM_A as the bank "optimized for small, regularly executed code such as interrupt service routines or OS kernels", which is what a TCM is wanted for here, and enabling the other two is one line each in entry.S once there is an answer. Two checks were also wrong and are fixed. T5 reported every bank accessible while two were disabled, because a disabled TCM's address range is serviced through AXIM and memory answering there says nothing about the TCM; it now requires the bank to be enabled as well. And T2 called tcm_enable() from EL1 for all three banks, which would have switched on the very banks entry.S leaves off. Verified on S32Z280 silicon: ATCM enabled and holding data before and after the MPU, the cache benchmark back to 24%, protection checks X2 and X4 unchanged, and the ThreadX demo still reporting 100 ticks with 20 preemptions. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-14 16:14:24 -04:00
Frédéric Desbiens	27891f3b84	Read the TCM configuration off the part, and corrected what we thought we knew (#615) ... The BSP has recorded since bring-up that the TCMs are inaccessible at reset "because nothing has programmed the TCM region registers yet". Reading those registers shows the reason was wrong. ATCM 0x0000011F 64KB, 1 wait state, ENABLED at EL2 and EL1/EL0 BTCM 0x00000014 16KB, 0 wait states, disabled CTCM 0x00000114 16KB, 1 wait state, disabled Every BASEADDRESS field is zero, so ATCM is live as 64KB at address 0x00000000, not at the 0x30000000 the reference manual documents. The reads that faulted were of an address the TCM is not at. ATCM's enables reset set because CFGTCMBOOTx is tied high on this part, which the Cortex-R52 TRM gives as the one exception to "at reset all bits are 0 apart from SIZE and WAITSTATES". BTCM and CTCM really are disabled. The sizes and wait states match the S32Z2 reference manual exactly -- TCMA 64KB with one wait state, TCMB 16KB with none, TCMC 16KB with one -- so the TRM's field layout, NXP's documented configuration and the silicon all agree. That agreement is the point of reading before writing. ECC is implemented and enabled: IMP_MEMPROTCTLR reads 0x00000011, both RAMPROTIMP and RAMPROTEN set. TRM 6.2.2 therefore applies rather than being hypothetical: a TCM location must be written before it is read, or the read reports an error -- which looks exactly like "the TCM is not accessible" and sends the reader back to region registers that were already correct. The preload widths differ too, ATCM needing 64-bit aligned STRD or STM where BTCM and CTCM accept 32-bit stores, so a C loop over unsigned int would leave ATCM's check bits invalid. tcm.c reads and decodes only; nothing is programmed here. The layouts in tcm.h are quoted from TRM r1p3 section 3.3.94 table 3-136 and section 3.3.76 table 3-114, not inferred from a neighbouring register: BASEADDRESS is [31:13] where IMP_PERIPHPREGIONR uses [31:12], and assuming the analogy would have been wrong by one bit in the same way the PRBAR shift was. The boot image reports all of it and flags any size that disagrees with the reference manual, so a part configured differently says so rather than being silently assumed to match this one. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-14 14:18:50 -04:00
Frédéric Desbiens	ea91beae42	Verified nested FIQ handling on S32Z280 silicon (#614) ... #613 exercised the FIQ nesting routines on the FVP. What the model could not show is whether a real GIC-600 routes Group 0 to FIQ the same way, which is the reason to run it here. It does, and the counts match the model exactly. The Group 0 support ports across unchanged: IGRPEN0 and BPR0 on the CPU interface, Group 0 in the distributor, gicv3_enable_sgi_group0, gicv3_send_sgi_group0 through ICC_SGI0R, and the separate Group 0 acknowledge and end-of-interrupt pair. entry.S routes the EL1 FIQ vector into _tx_thread_fiq_context_save with the acknowledge before nesting starts, and leaves FIQ unmasked on the drop to EL1 when FIQ support is compiled in, for the same reason as on the FVP: tx_thread_stack_build only clears a thread's F bit in that configuration. One structural difference from the FVP cost a link. This example reports faults through FAULT_TAIL rather than FAULT_REPORT, so the vector table needed a new el1_fiq_entry label that falls back to fault_el1_fiq. Placing that label inside the TX_R52_USE_THREADX_IRQ guard broke s32z280_boot.elf, which does not define it: the vector reference is unconditional, so the label has to be too. It now sits outside the guard and carries its own, the same shape the demo_m2 link break in #613 forced on the FVP side. Verified on S32Z280 silicon: F1 FIQ delivered and dispatched PASS low-priority FIQ count = 0x00000015 21 high-priority FIQ count = 0x00000014 20 nested FIQ count = 0x00000014 20 of 20 nested max FIQ depth = 0x00000002 FIQ depth now = 0x00000000 F2 FIQ nested inside an FIQ handler PASS F3 FIQ nesting unwound to depth zero PASS F4 IRQ tick undisturbed by FIQ work PASS F5 lower-priority thread still scheduled PASS F6 no unexpected Group 0 INTID PASS No regression, both configurations checked on the board. In the FIQ build the ThreadX demo still reports 100 ticks with 20 preemptions and the boot image still passes its cache and protection checks. In the default build the demo is unchanged and the image links no FIQ or Group 0 symbol at all, so the work is absent rather than dormant where it is not wanted -- worth confirming on hardware rather than reasoning about, because the default build now reaches the FIQ vector through a new label even though that label only branches to the fault reporter. entry.S assembles in all four combinations of TX_R52_USE_THREADX_IRQ and FIQ support, on both toolchains, and every file builds with GNU without warnings and with Arm Toolchain for Embedded 22.1.0. Assisted-by: Claude Code (Opus 5) <noreply@anthropic.com>	2026-08-14 13:34:34 -04:00