mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2026-09-22 11:30:01 +08:00
[bsp][rt1061] 新增飞凌 ok1061-s 开发板 bsp (#7468)
This commit is contained in:
xym
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,16 @@
|
||||
mainmenu "RT-Thread Configuration"
|
||||
|
||||
config RTT_DIR
|
||||
string
|
||||
option env="RTT_ROOT"
|
||||
default "../../.."
|
||||
|
||||
config PKGS_DIR
|
||||
string
|
||||
option env="PKGS_ROOT"
|
||||
default "packages"
|
||||
|
||||
source "$RTT_DIR/Kconfig"
|
||||
source "$PKGS_DIR/Kconfig"
|
||||
source "../libraries/Kconfig"
|
||||
source "board/Kconfig"
|
||||
@@ -0,0 +1,126 @@
|
||||
# OK1061-S 开发板 BSP 说明
|
||||
|
||||
## 简介
|
||||
|
||||
本文档为 RT-Thread 开发团队为飞凌 OK1061-S 开发板提供的 BSP (板级支持包) 说明。
|
||||
|
||||
主要内容如下：
|
||||
|
||||
- 开发板资源介绍
|
||||
- BSP 快速上手
|
||||
- 进阶使用方法
|
||||
|
||||
通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
|
||||
|
||||
## 开发板介绍
|
||||
|
||||
|
||||
OK1061-S 开发板基于 NXP 公司 i.MX RT1061 跨界处理器设计，搭载 ARM Cortex -M7 内核，集微控制器的低功耗、易用性与应用处理器的高性能、高扩展性于一体。底板+核心板分离结构，采用邮票孔封装设计，核心板体积小巧仅30×30×3mm，引脚数量100PIN，间距1.0mm，方便嵌入各种尺寸的设备中。
|
||||
|
||||
|
||||
运行频率 528MHz(商业级为600MHz)，1MB片上SRAM多达 512KB 可配置为紧耦合存储器 (TCM)，QSPI-Nor Flash 支持容量4MB。底板+核心板分离结构，采用邮票孔封装设计，核心板体积小巧仅30×30×3mm，引脚数量100PIN，间距1.0mm，方便嵌入各种尺寸的设备中。为了更大限度发挥CPU特性，核心板引出CPU大部分功能，同时配备了一系列特别适合实时应用的功能，例如高速GPIO 、CAN-FD，以及同步并行 NAND/NOR/PSRAM 控制器。工业级设计核心板，运行温宽 -40℃~+85℃；为了更加方便客户评估使用，OK1061-S开发板引出UART、Ethernet*2、USB、CAN、CAN FD、HS_GPIO、PWM、ADC等丰富外设功能；支持裸机，FreeRTOS等实时系统。
|
||||
|
||||
|
||||
开发板外观如下图所示：
|
||||
|
||||
<figure>
|
||||
<img src = "./figures/board.png" width=300 ">
|
||||
</figure>
|
||||
|
||||
|
||||
该开发板常用**板载资源**如下：
|
||||
|
||||
- MCU：MIMXRT1061CVL5B，主频 600MHz，1024KB RAM(512 KB 可配置为 TCM)
|
||||
- 外部 FLASH：型号 25Q32JVSIQ，4MB
|
||||
- 常用接口：RS232、SD 卡接口、以太网接口、USB Host、USB OTG等
|
||||
- 调试接口：SWD
|
||||
|
||||
开发板更多详细信息请参考飞凌嵌入式 [OK1061-S 开发板](https://www.forlinx.com/product/rs1061-45.html)。
|
||||
|
||||
## 外设支持
|
||||
|
||||
本 BSP 目前对外设的支持情况如下：
|
||||
|
||||
| **板载外设** | **支持情况** | **备注** |
|
||||
| :---------- | :----: | :----------------------- |
|
||||
| RS232 | 支持 | UART1 |
|
||||
| LED | 支持 | |
|
||||
| Ethernet | 暂不支持 | |
|
||||
| SD 卡 | 暂不支持 | |
|
||||
| EEPROM | 暂不支持 | |
|
||||
| **片上外设** | **支持情况** | **备注** |
|
||||
| GPIO | 支持 | |
|
||||
| UART | 支持 | UART1、UART2 |
|
||||
| SPI | 暂不支持 | 即将支持 |
|
||||
| IIC | 暂不支持 | 即将支持 |
|
||||
| ADC | 暂不支持 | 即将支持 |
|
||||
| RTC | 暂不支持 | 即将支持 |
|
||||
| PWM | 暂不支持 | 即将支持 |
|
||||
| CAN | 暂不支持 | 即将支持 |
|
||||
|
||||
|
||||
## Keil IDE 使用说明
|
||||
|
||||
使用说明分为如下两个章节：
|
||||
|
||||
- 快速上手
|
||||
|
||||
本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
|
||||
|
||||
- 进阶使用
|
||||
|
||||
本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
|
||||
|
||||
|
||||
### 快速上手
|
||||
|
||||
本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
|
||||
|
||||
#### 硬件连接
|
||||
|
||||
使用数据线连接开发板到 PC，打开电源开关。
|
||||
|
||||
#### 编译下载
|
||||
|
||||
首先需要将需要将 RT1061 的 FLASH 下载算法（board目录下的 MIMXRT_QSPIFLASH.FLM 文件）拷贝到 `MDK 安装路径/ARM/Flash` 文件夹中。双击 `project.uvprojx` 文件，打开 MDK5 工程，在调试选项里 `Flash Download` 一栏中按照下图所示选择下载算法并保存设置：
|
||||
|
||||
<figure>
|
||||
<img src = "./figures/flash.png" width=360>
|
||||
</figure>
|
||||
|
||||
编译工程，工程默认配置使用 CMSIS-DAP 下载程序，在通过 CMSIS-DAP 连接开发板的基础上，点击下载按钮即可下载程序到开发板。
|
||||
|
||||
#### 运行结果
|
||||
|
||||
下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，蓝色 LED 会周期性闪烁。
|
||||
|
||||
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
|
||||
|
||||
```bash
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 5.0.1 build May 9 2023 15:35:22
|
||||
2006 - 2022 Copyright by RT-Thread team
|
||||
msh >
|
||||
```
|
||||
### 进阶使用
|
||||
|
||||
此 BSP 默认只开启了 GPIO 和 串口 1 的功能，如果需使用更多高级外设功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下：
|
||||
|
||||
1. 在 bsp 下打开 env 工具。
|
||||
|
||||
2. 输入 `menuconfig` 命令配置工程，配置好之后保存退出。
|
||||
|
||||
3. 输入 `pkgs --update` 命令更新软件包。
|
||||
|
||||
4. 输入 `scons --target=mdk5/iar` 命令重新生成工程。
|
||||
|
||||
本章节更多详细的介绍请参考 [IMXRT系列BSP外设驱动使用教程](../docs/IMXRT系列BSP外设驱动使用教程.md)。
|
||||
|
||||
|
||||
|
||||
## 联系人信息
|
||||
|
||||
维护人:
|
||||
|
||||
- [xym-ee](https://github.com/xym-ee)
|
||||
@@ -0,0 +1,14 @@
|
||||
# for module compiling
|
||||
import os
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
objs = []
|
||||
list = os.listdir(cwd)
|
||||
|
||||
for d in list:
|
||||
path = os.path.join(cwd, d)
|
||||
if os.path.isfile(os.path.join(path, 'SConscript')):
|
||||
objs = objs + SConscript(os.path.join(d, 'SConscript'))
|
||||
|
||||
Return('objs')
|
||||
@@ -0,0 +1,71 @@
|
||||
import os
|
||||
import sys
|
||||
import rtconfig
|
||||
|
||||
if os.getenv('RTT_ROOT'):
|
||||
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||
else:
|
||||
RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
|
||||
|
||||
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
|
||||
try:
|
||||
from building import *
|
||||
except:
|
||||
print('Cannot found RT-Thread root directory, please check RTT_ROOT')
|
||||
print(RTT_ROOT)
|
||||
exit(-1)
|
||||
|
||||
TARGET = 'rtthread.' + rtconfig.TARGET_EXT
|
||||
DefaultEnvironment(tools=[])
|
||||
if rtconfig.PLATFORM == 'armcc':
|
||||
env = Environment(tools = ['mingw'],
|
||||
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
|
||||
CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
|
||||
CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
|
||||
AR = rtconfig.AR, ARFLAGS = '-rc',
|
||||
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS,
|
||||
# overwrite cflags, because cflags has '--C99'
|
||||
CXXCOM = '$CXX -o $TARGET --cpp -c $CXXFLAGS $_CCCOMCOM $SOURCES')
|
||||
else:
|
||||
env = Environment(tools = ['mingw'],
|
||||
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
|
||||
CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
|
||||
CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
|
||||
AR = rtconfig.AR, ARFLAGS = '-rc',
|
||||
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS,
|
||||
CXXCOM = '$CXX -o $TARGET -c $CXXFLAGS $_CCCOMCOM $SOURCES')
|
||||
|
||||
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
|
||||
|
||||
if rtconfig.PLATFORM in ['iccarm']:
|
||||
env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
|
||||
env.Replace(ARFLAGS = [''])
|
||||
env.Replace(LINKCOM = env["LINKCOM"] + ' --map rtthread.map')
|
||||
|
||||
Export('RTT_ROOT')
|
||||
Export('rtconfig')
|
||||
|
||||
SDK_ROOT = os.path.abspath('./')
|
||||
|
||||
if os.path.exists(SDK_ROOT + '/libraries'):
|
||||
libraries_path_prefix = SDK_ROOT + '/libraries'
|
||||
else:
|
||||
libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
|
||||
|
||||
SDK_LIB = libraries_path_prefix
|
||||
Export('SDK_LIB')
|
||||
|
||||
# prepare building environment
|
||||
objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
|
||||
|
||||
imxrt_library = 'MIMXRT1061'
|
||||
rtconfig.BSP_LIBRARY_TYPE = imxrt_library
|
||||
|
||||
# include libraries
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, imxrt_library, 'SConscript')))
|
||||
|
||||
# include drivers
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, 'drivers', 'SConscript')))
|
||||
|
||||
# make a building
|
||||
DoBuilding(TARGET, objs)
|
||||
@@ -0,0 +1,22 @@
|
||||
import rtconfig
|
||||
from building import *
|
||||
import os
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
src = Glob('*.c')
|
||||
CPPPATH = [cwd]
|
||||
|
||||
# add for startup script
|
||||
if rtconfig.PLATFORM in ['gcc']:
|
||||
CPPDEFINES = ['__START=entry']
|
||||
else:
|
||||
CPPDEFINES = []
|
||||
|
||||
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
|
||||
|
||||
list = os.listdir(cwd)
|
||||
for item in list:
|
||||
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
|
||||
group = group + SConscript(os.path.join(item, 'SConscript'))
|
||||
|
||||
Return('group')
|
||||
@@ -0,0 +1,31 @@
|
||||
/*
|
||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2023-05-09 xym-ee first version
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
#include <board.h>
|
||||
|
||||
/* defined the LED pin: GPIO1_IO9 */
|
||||
#define LED0_PIN GET_PIN(1,9)
|
||||
|
||||
int main(void)
|
||||
{
|
||||
/* set LED0 pin mode to output */
|
||||
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
|
||||
|
||||
while (1)
|
||||
{
|
||||
rt_pin_write(LED0_PIN, PIN_HIGH);
|
||||
rt_thread_mdelay(500);
|
||||
rt_pin_write(LED0_PIN, PIN_LOW);
|
||||
rt_thread_mdelay(500);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -0,0 +1,99 @@
|
||||
menu "Hardware Drivers Config"
|
||||
|
||||
config SOC_IMXRT1061CVL5A
|
||||
bool
|
||||
select SOC_IMXRT1060_SERIES
|
||||
select RT_USING_COMPONENTS_INIT
|
||||
select RT_USING_USER_MAIN
|
||||
default y
|
||||
|
||||
menu "On-chip Peripheral Drivers"
|
||||
|
||||
config BSP_USING_DMA
|
||||
bool "Enable DMA"
|
||||
default n
|
||||
|
||||
config BSP_USING_GPIO
|
||||
bool "Enable GPIO"
|
||||
select RT_USING_PIN
|
||||
default y
|
||||
|
||||
menuconfig BSP_USING_LPUART
|
||||
bool "Enable UART"
|
||||
select RT_USING_SERIAL
|
||||
default y
|
||||
|
||||
if BSP_USING_LPUART
|
||||
config BSP_USING_LPUART1
|
||||
bool "Enable LPUART1"
|
||||
default y
|
||||
|
||||
config BSP_LPUART1_RX_USING_DMA
|
||||
bool "Enable LPUART1 RX DMA"
|
||||
depends on BSP_USING_LPUART1
|
||||
select BSP_USING_DMA
|
||||
select RT_SERIAL_USING_DMA
|
||||
default n
|
||||
|
||||
config BSP_LPUART1_RX_DMA_CHANNEL
|
||||
depends on BSP_LPUART1_RX_USING_DMA
|
||||
int "Set LPUART1 RX DMA channel (0-32)"
|
||||
default 0
|
||||
|
||||
config BSP_LPUART1_TX_USING_DMA
|
||||
bool "Enable LPUART1 TX DMA"
|
||||
depends on BSP_USING_LPUART1
|
||||
select BSP_USING_DMA
|
||||
select RT_SERIAL_USING_DMA
|
||||
default n
|
||||
|
||||
config BSP_LPUART1_TX_DMA_CHANNEL
|
||||
depends on BSP_LPUART1_TX_USING_DMA
|
||||
int "Set LPUART1 TX DMA channel (0-32)"
|
||||
default 1
|
||||
|
||||
config BSP_USING_LPUART2
|
||||
bool "Enable LPUART2"
|
||||
default n
|
||||
|
||||
config BSP_LPUART2_RX_USING_DMA
|
||||
bool "Enable LPUART2 RX DMA"
|
||||
depends on BSP_USING_LPUART2
|
||||
select BSP_USING_DMA
|
||||
select RT_SERIAL_USING_DMA
|
||||
default n
|
||||
|
||||
config BSP_LPUART2_RX_DMA_CHANNEL
|
||||
depends on BSP_LPUART2_RX_USING_DMA
|
||||
int "Set LPUART2 RX DMA channel (0-32)"
|
||||
default 2
|
||||
|
||||
config BSP_LPUART2_TX_USING_DMA
|
||||
bool "Enable LPUART2 TX DMA"
|
||||
depends on BSP_USING_LPUART2
|
||||
select BSP_USING_DMA
|
||||
select RT_SERIAL_USING_DMA
|
||||
default n
|
||||
|
||||
config BSP_LPUART2_TX_DMA_CHANNEL
|
||||
depends on BSP_LPUART2_TX_USING_DMA
|
||||
int "Set LPUART2 TX DMA channel (0-32)"
|
||||
default 3
|
||||
endif
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Onboard Peripheral Drivers"
|
||||
|
||||
config BSP_USING_RS232
|
||||
bool "Enable RS232"
|
||||
select BSP_USING_LPUART1
|
||||
default n
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Board extended module Drivers"
|
||||
|
||||
endmenu
|
||||
|
||||
endmenu
|
||||
@@ -0,0 +1,495 @@
|
||||
<?xml version="1.0" encoding= "UTF-8" ?>
|
||||
<configuration name="IMXRT1050-EVKB" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="789fd1d3-821c-40a6-b04d-44ccc5a5d158" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
||||
<common>
|
||||
<processor>MIMXRT1061xxxxB</processor>
|
||||
<package>MIMXRT1061CVL5B</package>
|
||||
<board_revision>A</board_revision>
|
||||
<mcu_data>ksdk2_0</mcu_data>
|
||||
<cores selected="core0">
|
||||
<core name="Cortex-M7F" id="core0" description="M7 core"/>
|
||||
</cores>
|
||||
<description></description>
|
||||
</common>
|
||||
<preferences>
|
||||
<validate_boot_init_only>false</validate_boot_init_only>
|
||||
<generate_extended_information>false</generate_extended_information>
|
||||
<generate_code_modified_registers_only>false</generate_code_modified_registers_only>
|
||||
<update_include_paths>true</update_include_paths>
|
||||
<generate_registers_defines>false</generate_registers_defines>
|
||||
</preferences>
|
||||
<tools>
|
||||
<pins name="Pins" version="13.1" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/pin_mux.c" update_enabled="true"/>
|
||||
<file path="board/pin_mux.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<pins_profile>
|
||||
<processor_version>13.0.2</processor_version>
|
||||
<pin_labels>
|
||||
<pin_label pin_num="G11" pin_signal="GPIO_AD_B0_03" label="BSP_BEEP"/>
|
||||
<pin_label pin_num="L13" pin_signal="GPIO_AD_B1_10" label="BSP_RS485_RE" identifier="CSI_D7"/>
|
||||
<pin_label pin_num="J13" pin_signal="GPIO_AD_B1_11" label="BSP_DS18B20" identifier="CSI_D6"/>
|
||||
<pin_label pin_num="K12" pin_signal="GPIO_AD_B1_05" label="BSP_AP3216C_INT" identifier="CSI_MCLK"/>
|
||||
</pin_labels>
|
||||
<power_domains/>
|
||||
</pins_profile>
|
||||
<functions_list>
|
||||
<function name="BOARD_InitPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>false</callFromInitBoot>
|
||||
<coreID>core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="Peripheral" resourceId="LPUART2" description="Peripheral LPUART2 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12"/>
|
||||
<pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13"/>
|
||||
<pin peripheral="LPUART2" signal="TX" pin_num="L11" pin_signal="GPIO_AD_B1_02"/>
|
||||
<pin peripheral="LPUART2" signal="RX" pin_num="M12" pin_signal="GPIO_AD_B1_03"/>
|
||||
</pins>
|
||||
</function>
|
||||
</functions_list>
|
||||
</pins>
|
||||
<clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/clock_config.c" update_enabled="true"/>
|
||||
<file path="board/clock_config.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<clocks_profile>
|
||||
<processor_version>13.0.2</processor_version>
|
||||
</clocks_profile>
|
||||
<clock_configurations>
|
||||
<clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="'RTC_XTALI' (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="'RTC_XTALI' (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>INPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="'RTC_XTALO' (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="'RTC_XTALO' (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>OUTPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="'XTALI' (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="'XTALI' (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>INPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="'XTALO' (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="'XTALO' (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>OUTPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<clock_sources>
|
||||
<clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
|
||||
</clock_sources>
|
||||
<clock_outputs>
|
||||
<clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
|
||||
<clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="264 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="2880/11 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
|
||||
<clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="PLL7_MAIN_CLK.outFreq" value="24 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="TRACE_CLK_ROOT.outFreq" value="352/3 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
|
||||
</clock_outputs>
|
||||
<clock_settings>
|
||||
<setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
|
||||
<setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
|
||||
<setting id="CCM.FLEXSPI_PODF.scale" value="1" locked="true"/>
|
||||
<setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
|
||||
<setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
|
||||
<setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
|
||||
<setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
|
||||
<setting id="CCM.TRACE_PODF.scale" value="3" locked="true"/>
|
||||
<setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
|
||||
<setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
|
||||
<setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
|
||||
<setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
|
||||
<setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
|
||||
<setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
|
||||
<setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL5.div" value="40" locked="false"/>
|
||||
<setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
|
||||
<setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
|
||||
<setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
|
||||
</clock_settings>
|
||||
<called_from_default_init>true</called_from_default_init>
|
||||
</clock_configuration>
|
||||
</clock_configurations>
|
||||
</clocks>
|
||||
<dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<dcdx_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</dcdx_profile>
|
||||
<dcdx_configurations/>
|
||||
</dcdx>
|
||||
<periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="工具链/IDE工程中未找到LPUART Driver。工程不会被编译！" problem_level="2" source="Peripherals">
|
||||
<feature name="enabled" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="工具链/IDE工程不支持LPUART Driver版本。所需值: ${required_value}, 实际值: ${actual_value}. 工程可能没有被正确编译。" problem_level="1" source="Peripherals">
|
||||
<feature name="version" evaluation="equivalent">
|
||||
<data type="Version">2.5.1</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpi2c" description="工具链/IDE工程中未找到LPI2C Driver。工程不会被编译！" problem_level="2" source="Peripherals">
|
||||
<feature name="enabled" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpi2c" description="工具链/IDE工程不支持LPI2C Driver版本。所需值: ${required_value}, 实际值: ${actual_value}. 工程可能没有被正确编译。" problem_level="1" source="Peripherals">
|
||||
<feature name="version" evaluation="greaterOrEqual">
|
||||
<data type="Version">2.2.0</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<generated_project_files/>
|
||||
<peripherals_profile>
|
||||
<processor_version>13.0.2</processor_version>
|
||||
</peripherals_profile>
|
||||
<functional_groups>
|
||||
<functional_group name="BOARD_InitPeripherals" uuid="a7525270-2da6-4556-8d91-4ab9d0edc0e2" called_from_default_init="true" id_prefix="" core="core0">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="ClockOutput" resourceId="UART_CLK_ROOT" description="UART_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="frequency" evaluation="greaterThan">
|
||||
<data type="Frequency" unit="Hz">0</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_tx" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_rx" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="ClockOutput" resourceId="LPI2C_CLK_ROOT" description="LPI2C_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="frequency" evaluation="greaterThan">
|
||||
<data type="Frequency" unit="Hz">0</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPI2C1.lpi2c_scl" description="Signal serial clock is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPI2C1.lpi2c_sda" description="Signal serial data is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="ClockOutput" resourceId="UART_CLK_ROOT" description="UART_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="frequency" evaluation="greaterThan">
|
||||
<data type="Frequency" unit="Hz">0</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART2.uart_tx" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART2.uart_rx" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="ClockOutput" resourceId="UART_CLK_ROOT" description="UART_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="frequency" evaluation="greaterThan">
|
||||
<data type="Frequency" unit="Hz">0</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART5.uart_tx" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART5.uart_rx" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<instances>
|
||||
<instance name="LPUART_1" uuid="e3dd327d-b7f4-48ce-9f00-c74e2caae1cf" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
|
||||
<struct name="lpuartConfig">
|
||||
<setting name="clockSource" value="LpuartClock"/>
|
||||
<setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
|
||||
<setting name="baudRate_Bps" value="115200"/>
|
||||
<setting name="parityMode" value="kLPUART_ParityDisabled"/>
|
||||
<setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
|
||||
<setting name="isMsb" value="false"/>
|
||||
<setting name="stopBitCount" value="kLPUART_OneStopBit"/>
|
||||
<setting name="enableMatchAddress1" value="false"/>
|
||||
<setting name="matchAddress1" value="0"/>
|
||||
<setting name="enableMatchAddress2" value="false"/>
|
||||
<setting name="matchAddress2" value="0"/>
|
||||
<setting name="txFifoWatermark" value="0"/>
|
||||
<setting name="rxFifoWatermark" value="1"/>
|
||||
<setting name="enableRxRTS" value="false"/>
|
||||
<setting name="enableTxCTS" value="false"/>
|
||||
<setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
|
||||
<setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
|
||||
<setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
|
||||
<setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
|
||||
<setting name="enableTx" value="true"/>
|
||||
<setting name="enableRx" value="true"/>
|
||||
</struct>
|
||||
</config_set>
|
||||
</instance>
|
||||
<instance name="LPI2C_1" uuid="f1f568e4-1ecf-4019-a4c3-913ad7bbba54" type="lpi2c" type_id="lpi2c_6b71962515c3208facfccd030afebc98" mode="master" peripheral="LPI2C1" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="main" quick_selection="qs_interrupt">
|
||||
<setting name="clockSource" value="Lpi2cClock"/>
|
||||
<setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
|
||||
</config_set>
|
||||
<config_set name="interrupt_vector"/>
|
||||
<config_set name="master" quick_selection="qs_master_transfer">
|
||||
<setting name="mode" value="transfer"/>
|
||||
<struct name="config">
|
||||
<setting name="enableMaster" value="true"/>
|
||||
<setting name="enableDoze" value="true"/>
|
||||
<setting name="debugEnable" value="false"/>
|
||||
<setting name="ignoreAck" value="false"/>
|
||||
<setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
|
||||
<setting name="baudRate_Hz" value="100000"/>
|
||||
<setting name="busIdleTimeout_ns" value="0"/>
|
||||
<setting name="pinLowTimeout_ns" value="0"/>
|
||||
<setting name="sdaGlitchFilterWidth_ns" value="0"/>
|
||||
<setting name="sclGlitchFilterWidth_ns" value="0"/>
|
||||
<struct name="hostRequest">
|
||||
<setting name="enable" value="false"/>
|
||||
<setting name="source" value="kLPI2C_HostRequestExternalPin"/>
|
||||
<setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
|
||||
</struct>
|
||||
<set name="edmaRequestSources">
|
||||
<selected/>
|
||||
</set>
|
||||
</struct>
|
||||
<struct name="transfer">
|
||||
<setting name="blocking" value="false"/>
|
||||
<setting name="enable_custom_handle" value="false"/>
|
||||
<struct name="callback">
|
||||
<setting name="name" value=""/>
|
||||
<setting name="userData" value=""/>
|
||||
</struct>
|
||||
<set name="flags">
|
||||
<selected/>
|
||||
</set>
|
||||
<setting name="slaveAddress" value="0"/>
|
||||
<setting name="direction" value="kLPI2C_Write"/>
|
||||
<setting name="subaddress" value="0"/>
|
||||
<setting name="subaddressSize" value="1"/>
|
||||
<setting name="blocking_buffer" value="false"/>
|
||||
<setting name="enable_custom_buffer" value="false"/>
|
||||
<setting name="dataSize" value="1"/>
|
||||
</struct>
|
||||
</config_set>
|
||||
</instance>
|
||||
<instance name="LPUART_2" uuid="749c2d92-5f58-4467-bcdf-18903a8d90fe" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART2" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
|
||||
<struct name="lpuartConfig">
|
||||
<setting name="clockSource" value="LpuartClock"/>
|
||||
<setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
|
||||
<setting name="baudRate_Bps" value="115200"/>
|
||||
<setting name="parityMode" value="kLPUART_ParityDisabled"/>
|
||||
<setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
|
||||
<setting name="isMsb" value="false"/>
|
||||
<setting name="stopBitCount" value="kLPUART_OneStopBit"/>
|
||||
<setting name="enableMatchAddress1" value="false"/>
|
||||
<setting name="matchAddress1" value="0"/>
|
||||
<setting name="enableMatchAddress2" value="false"/>
|
||||
<setting name="matchAddress2" value="0"/>
|
||||
<setting name="txFifoWatermark" value="0"/>
|
||||
<setting name="rxFifoWatermark" value="1"/>
|
||||
<setting name="enableRxRTS" value="false"/>
|
||||
<setting name="enableTxCTS" value="false"/>
|
||||
<setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
|
||||
<setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
|
||||
<setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
|
||||
<setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
|
||||
<setting name="enableTx" value="true"/>
|
||||
<setting name="enableRx" value="true"/>
|
||||
</struct>
|
||||
</config_set>
|
||||
</instance>
|
||||
<instance name="LPUART_3" uuid="838ee490-9fc3-4dc7-a730-d67ff58897cc" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART5" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
|
||||
<struct name="lpuartConfig">
|
||||
<setting name="clockSource" value="LpuartClock"/>
|
||||
<setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
|
||||
<setting name="baudRate_Bps" value="115200"/>
|
||||
<setting name="parityMode" value="kLPUART_ParityDisabled"/>
|
||||
<setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
|
||||
<setting name="isMsb" value="false"/>
|
||||
<setting name="stopBitCount" value="kLPUART_OneStopBit"/>
|
||||
<setting name="enableMatchAddress1" value="false"/>
|
||||
<setting name="matchAddress1" value="0"/>
|
||||
<setting name="enableMatchAddress2" value="false"/>
|
||||
<setting name="matchAddress2" value="0"/>
|
||||
<setting name="txFifoWatermark" value="0"/>
|
||||
<setting name="rxFifoWatermark" value="1"/>
|
||||
<setting name="enableRxRTS" value="false"/>
|
||||
<setting name="enableTxCTS" value="false"/>
|
||||
<setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
|
||||
<setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
|
||||
<setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
|
||||
<setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
|
||||
<setting name="enableTx" value="true"/>
|
||||
<setting name="enableRx" value="true"/>
|
||||
</struct>
|
||||
</config_set>
|
||||
</instance>
|
||||
<instance name="NVIC" uuid="f246ba53-56ca-4c69-995a-797848098b44" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
|
||||
<config_set name="nvic">
|
||||
<array name="interrupt_table"/>
|
||||
<array name="interrupts"/>
|
||||
</config_set>
|
||||
</instance>
|
||||
</instances>
|
||||
</functional_group>
|
||||
</functional_groups>
|
||||
<components>
|
||||
<component name="system" uuid="c489fc0d-6144-448b-aa32-a370a31cef10" type_id="system_54b53072540eeeb8f8e9343e71f28176">
|
||||
<config_set_global name="global_system_definitions">
|
||||
<setting name="user_definitions" value=""/>
|
||||
<setting name="user_includes" value=""/>
|
||||
</config_set_global>
|
||||
</component>
|
||||
<component name="uart_cmsis_common" uuid="df1af316-3fca-4f75-93b1-4392e31d8e47" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
|
||||
<config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
|
||||
</component>
|
||||
<component name="msg" uuid="11043df4-ad87-424d-947c-5e7303d619b1" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
|
||||
<config_set_global name="global_messages"/>
|
||||
</component>
|
||||
<component name="gpio_adapter_common" uuid="b207c14d-580d-48ac-8ae4-b56ae8c1b509" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
|
||||
<config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
|
||||
</component>
|
||||
<component name="generic_uart" uuid="9cbc60c2-0813-4dee-97a5-7d36ee7109e2" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
|
||||
<config_set_global name="global_uart"/>
|
||||
</component>
|
||||
<component name="generic_enet" uuid="26b90a8e-0391-44f1-ba17-c073cef25edb" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
|
||||
<config_set_global name="global_enet"/>
|
||||
</component>
|
||||
<component name="generic_can" uuid="5e14b293-22b2-447b-bac1-a1ae15a8d5e5" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
|
||||
<config_set_global name="global_can"/>
|
||||
</component>
|
||||
</components>
|
||||
</periphs>
|
||||
<tee name="TEE" version="4.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<tee_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</tee_profile>
|
||||
</tee>
|
||||
<common name="common" version="1.0" enabled="true" update_project_code="true">
|
||||
<core name="core0" role="primary" project_name="Project"/>
|
||||
</common>
|
||||
</tools>
|
||||
</configuration>
|
||||
@@ -0,0 +1,458 @@
|
||||
/*
|
||||
* How to setup clock using clock driver functions:
|
||||
*
|
||||
* 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
|
||||
*
|
||||
* 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
|
||||
*
|
||||
* 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
|
||||
*
|
||||
* 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
|
||||
*
|
||||
* 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
|
||||
*
|
||||
*/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Clocks v11.0
|
||||
processor: MIMXRT1061xxxxB
|
||||
package_id: MIMXRT1061CVL5B
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 13.0.2
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
#include "clock_config.h"
|
||||
#include "fsl_iomuxc.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
void BOARD_InitBootClocks(void)
|
||||
{
|
||||
BOARD_BootClockRUN();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
********************** Configuration BOARD_BootClockRUN ***********************
|
||||
******************************************************************************/
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockRUN
|
||||
called_from_default_init: true
|
||||
outputs:
|
||||
- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
|
||||
- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
|
||||
- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
|
||||
- {id: CLK_1M.outFreq, value: 1 MHz}
|
||||
- {id: CLK_24M.outFreq, value: 24 MHz}
|
||||
- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
|
||||
- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
|
||||
- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
|
||||
- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
|
||||
- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
|
||||
- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 264 MHz}
|
||||
- {id: FLEXSPI_CLK_ROOT.outFreq, value: 2880/11 MHz}
|
||||
- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
|
||||
- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
|
||||
- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
|
||||
- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
|
||||
- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
|
||||
- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
|
||||
- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
|
||||
- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
|
||||
- {id: PLL7_MAIN_CLK.outFreq, value: 24 MHz}
|
||||
- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
|
||||
- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
|
||||
- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
|
||||
- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
|
||||
- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
|
||||
- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
|
||||
- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
|
||||
- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
|
||||
- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
|
||||
- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
|
||||
- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
|
||||
- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
|
||||
- {id: TRACE_CLK_ROOT.outFreq, value: 352/3 MHz}
|
||||
- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
|
||||
- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
|
||||
- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
|
||||
settings:
|
||||
- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
|
||||
- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
|
||||
- {id: CCM.FLEXSPI_PODF.scale, value: '1', locked: true}
|
||||
- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
|
||||
- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
|
||||
- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
|
||||
- {id: CCM.SEMC_PODF.scale, value: '8'}
|
||||
- {id: CCM.TRACE_PODF.scale, value: '3', locked: true}
|
||||
- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
|
||||
- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
|
||||
- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
|
||||
- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
|
||||
- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
|
||||
- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
|
||||
- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
|
||||
- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
|
||||
- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
|
||||
- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
|
||||
- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
|
||||
- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
|
||||
- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
|
||||
- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
|
||||
- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
|
||||
- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
|
||||
- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
|
||||
- {id: CCM_ANALOG.PLL4.denom, value: '50'}
|
||||
- {id: CCM_ANALOG.PLL4.div, value: '47'}
|
||||
- {id: CCM_ANALOG.PLL5.denom, value: '1'}
|
||||
- {id: CCM_ANALOG.PLL5.div, value: '40'}
|
||||
- {id: CCM_ANALOG.PLL5.num, value: '0'}
|
||||
- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
|
||||
- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
|
||||
sources:
|
||||
- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
|
||||
{
|
||||
.loopDivider = 100, /* PLL loop divider, Fout = Fin * 50 */
|
||||
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
|
||||
};
|
||||
const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
|
||||
{
|
||||
.loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
|
||||
.numerator = 0, /* 30 bit numerator of fractional loop divider */
|
||||
.denominator = 1, /* 30 bit denominator of fractional loop divider */
|
||||
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
|
||||
};
|
||||
const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
|
||||
{
|
||||
.loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */
|
||||
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
|
||||
};
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockRUN(void)
|
||||
{
|
||||
/* Init RTC OSC clock frequency. */
|
||||
CLOCK_SetRtcXtalFreq(32768U);
|
||||
/* Enable 1MHz clock output. */
|
||||
XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
|
||||
/* Use free 1MHz clock output. */
|
||||
XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
|
||||
/* Set XTAL 24MHz clock frequency. */
|
||||
CLOCK_SetXtalFreq(24000000U);
|
||||
/* Enable XTAL 24MHz clock source. */
|
||||
CLOCK_InitExternalClk(0);
|
||||
/* Enable internal RC. */
|
||||
CLOCK_InitRcOsc24M();
|
||||
/* Switch clock source to external OSC. */
|
||||
CLOCK_SwitchOsc(kCLOCK_XtalOsc);
|
||||
/* Set Oscillator ready counter value. */
|
||||
CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
|
||||
/* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
|
||||
CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
|
||||
CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
|
||||
/* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
|
||||
DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
|
||||
/* Waiting for DCDC_STS_DC_OK bit is asserted */
|
||||
while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
|
||||
{
|
||||
}
|
||||
/* Set AHB_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
|
||||
/* Disable IPG clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Adc1);
|
||||
CLOCK_DisableClock(kCLOCK_Adc2);
|
||||
CLOCK_DisableClock(kCLOCK_Xbar1);
|
||||
CLOCK_DisableClock(kCLOCK_Xbar2);
|
||||
CLOCK_DisableClock(kCLOCK_Xbar3);
|
||||
/* Set IPG_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
|
||||
/* Set ARM_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
|
||||
/* Set PERIPH_CLK2_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
|
||||
/* Disable PERCLK clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Gpt1);
|
||||
CLOCK_DisableClock(kCLOCK_Gpt1S);
|
||||
CLOCK_DisableClock(kCLOCK_Gpt2);
|
||||
CLOCK_DisableClock(kCLOCK_Gpt2S);
|
||||
CLOCK_DisableClock(kCLOCK_Pit);
|
||||
/* Set PERCLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
|
||||
/* Disable USDHC1 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Usdhc1);
|
||||
/* Set USDHC1_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
|
||||
/* Set Usdhc1 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
|
||||
/* Disable USDHC2 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Usdhc2);
|
||||
/* Set USDHC2_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
|
||||
/* Set Usdhc2 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
|
||||
/* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
|
||||
* With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
|
||||
* Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
|
||||
#ifndef SKIP_SYSCLK_INIT
|
||||
/* Disable Semc clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Semc);
|
||||
/* Set SEMC_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
|
||||
/* Set Semc alt clock source. */
|
||||
CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
|
||||
/* Set Semc clock source. */
|
||||
CLOCK_SetMux(kCLOCK_SemcMux, 0);
|
||||
#endif
|
||||
/* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
|
||||
* With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
|
||||
* Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
|
||||
#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
|
||||
/* Disable Flexspi clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_FlexSpi);
|
||||
/* Set FLEXSPI_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_FlexspiDiv, 0);
|
||||
/* Set Flexspi clock source. */
|
||||
CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
|
||||
#endif
|
||||
/* Disable Flexspi2 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_FlexSpi2);
|
||||
/* Set FLEXSPI2_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
|
||||
/* Set Flexspi2 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Flexspi2Mux, 3);
|
||||
/* Disable LPSPI clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Lpspi1);
|
||||
CLOCK_DisableClock(kCLOCK_Lpspi2);
|
||||
CLOCK_DisableClock(kCLOCK_Lpspi3);
|
||||
CLOCK_DisableClock(kCLOCK_Lpspi4);
|
||||
/* Set LPSPI_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
|
||||
/* Set Lpspi clock source. */
|
||||
CLOCK_SetMux(kCLOCK_LpspiMux, 2);
|
||||
/* Disable TRACE clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Trace);
|
||||
/* Set TRACE_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_TraceDiv, 2);
|
||||
/* Set Trace clock source. */
|
||||
CLOCK_SetMux(kCLOCK_TraceMux, 2);
|
||||
/* Disable SAI1 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Sai1);
|
||||
/* Set SAI1_CLK_PRED. */
|
||||
CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
|
||||
/* Set SAI1_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
|
||||
/* Set Sai1 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
|
||||
/* Disable SAI2 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Sai2);
|
||||
/* Set SAI2_CLK_PRED. */
|
||||
CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
|
||||
/* Set SAI2_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
|
||||
/* Set Sai2 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
|
||||
/* Disable SAI3 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Sai3);
|
||||
/* Set SAI3_CLK_PRED. */
|
||||
CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
|
||||
/* Set SAI3_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
|
||||
/* Set Sai3 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
|
||||
/* Disable Lpi2c clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Lpi2c1);
|
||||
CLOCK_DisableClock(kCLOCK_Lpi2c2);
|
||||
CLOCK_DisableClock(kCLOCK_Lpi2c3);
|
||||
/* Set LPI2C_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
|
||||
/* Set Lpi2c clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
|
||||
/* Disable CAN clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Can1);
|
||||
CLOCK_DisableClock(kCLOCK_Can2);
|
||||
CLOCK_DisableClock(kCLOCK_Can3);
|
||||
CLOCK_DisableClock(kCLOCK_Can1S);
|
||||
CLOCK_DisableClock(kCLOCK_Can2S);
|
||||
CLOCK_DisableClock(kCLOCK_Can3S);
|
||||
/* Set CAN_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_CanDiv, 1);
|
||||
/* Set Can clock source. */
|
||||
CLOCK_SetMux(kCLOCK_CanMux, 2);
|
||||
/* Disable UART clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart1);
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart2);
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart3);
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart4);
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart5);
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart6);
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart7);
|
||||
CLOCK_DisableClock(kCLOCK_Lpuart8);
|
||||
/* Set UART_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_UartDiv, 0);
|
||||
/* Set Uart clock source. */
|
||||
CLOCK_SetMux(kCLOCK_UartMux, 0);
|
||||
/* Disable SPDIF clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Spdif);
|
||||
/* Set SPDIF0_CLK_PRED. */
|
||||
CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
|
||||
/* Set SPDIF0_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
|
||||
/* Set Spdif clock source. */
|
||||
CLOCK_SetMux(kCLOCK_SpdifMux, 3);
|
||||
/* Disable Flexio1 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Flexio1);
|
||||
/* Set FLEXIO1_CLK_PRED. */
|
||||
CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
|
||||
/* Set FLEXIO1_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
|
||||
/* Set Flexio1 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
|
||||
/* Disable Flexio2 clock gate. */
|
||||
CLOCK_DisableClock(kCLOCK_Flexio2);
|
||||
/* Set FLEXIO2_CLK_PRED. */
|
||||
CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
|
||||
/* Set FLEXIO2_CLK_PODF. */
|
||||
CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
|
||||
/* Set Flexio2 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
|
||||
/* Set Pll3 sw clock source. */
|
||||
CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
|
||||
/* Init ARM PLL. */
|
||||
CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
|
||||
/* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
|
||||
* With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
|
||||
* Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
|
||||
#ifndef SKIP_SYSCLK_INIT
|
||||
#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
|
||||
#warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
|
||||
#endif
|
||||
/* Init System PLL. */
|
||||
CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
|
||||
/* Init System pfd0. */
|
||||
CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
|
||||
/* Init System pfd1. */
|
||||
CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
|
||||
/* Init System pfd2. */
|
||||
CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
|
||||
/* Init System pfd3. */
|
||||
CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
|
||||
#endif
|
||||
/* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
|
||||
* With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
|
||||
* Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
|
||||
#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
|
||||
/* Init Usb1 PLL. */
|
||||
CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
|
||||
/* Init Usb1 pfd0. */
|
||||
CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
|
||||
/* Init Usb1 pfd1. */
|
||||
CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
|
||||
/* Init Usb1 pfd2. */
|
||||
CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
|
||||
/* Init Usb1 pfd3. */
|
||||
CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
|
||||
/* Disable Usb1 PLL output for USBPHY1. */
|
||||
CCM_ANALOG->PLL_USB1 &= ~CCM_ANALOG_PLL_USB1_EN_USB_CLKS_MASK;
|
||||
#endif
|
||||
/* DeInit Audio PLL. */
|
||||
CLOCK_DeinitAudioPll();
|
||||
/* Bypass Audio PLL. */
|
||||
CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
|
||||
/* Set divider for Audio PLL. */
|
||||
CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
|
||||
CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
|
||||
/* Enable Audio PLL output. */
|
||||
CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
|
||||
/* DeInit Video PLL. */
|
||||
CLOCK_DeinitVideoPll();
|
||||
/* Bypass Video PLL. */
|
||||
CCM_ANALOG->PLL_VIDEO |= CCM_ANALOG_PLL_VIDEO_BYPASS_MASK;
|
||||
/* Set divider for Video PLL. */
|
||||
CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(0);
|
||||
/* Enable Video PLL output. */
|
||||
CCM_ANALOG->PLL_VIDEO |= CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
|
||||
/* DeInit Enet PLL. */
|
||||
CLOCK_DeinitEnetPll();
|
||||
/* Bypass Enet PLL. */
|
||||
CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
|
||||
/* Set Enet output divider. */
|
||||
CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
|
||||
/* Enable Enet output. */
|
||||
CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
|
||||
/* Set Enet2 output divider. */
|
||||
CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
|
||||
/* Enable Enet2 output. */
|
||||
CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
|
||||
/* Enable Enet25M output. */
|
||||
CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
|
||||
/* DeInit Usb2 PLL. */
|
||||
CLOCK_DeinitUsb2Pll();
|
||||
/* Bypass Usb2 PLL. */
|
||||
CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllUsb2, 1);
|
||||
/* Enable Usb2 PLL output. */
|
||||
CCM_ANALOG->PLL_USB2 |= CCM_ANALOG_PLL_USB2_ENABLE_MASK;
|
||||
/* Set preperiph clock source. */
|
||||
CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
|
||||
/* Set periph clock source. */
|
||||
CLOCK_SetMux(kCLOCK_PeriphMux, 0);
|
||||
/* Set periph clock2 clock source. */
|
||||
CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
|
||||
/* Set per clock source. */
|
||||
CLOCK_SetMux(kCLOCK_PerclkMux, 0);
|
||||
/* Set lvds1 clock source. */
|
||||
CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
|
||||
/* Set clock out1 divider. */
|
||||
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
|
||||
/* Set clock out1 source. */
|
||||
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
|
||||
/* Set clock out2 divider. */
|
||||
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
|
||||
/* Set clock out2 source. */
|
||||
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
|
||||
/* Set clock out1 drives clock out1. */
|
||||
CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
|
||||
/* Disable clock out1. */
|
||||
CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
|
||||
/* Disable clock out2. */
|
||||
CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
|
||||
/* Set SAI1 MCLK1 clock source. */
|
||||
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
|
||||
/* Set SAI1 MCLK2 clock source. */
|
||||
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
|
||||
/* Set SAI1 MCLK3 clock source. */
|
||||
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
|
||||
/* Set SAI2 MCLK3 clock source. */
|
||||
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
|
||||
/* Set SAI3 MCLK3 clock source. */
|
||||
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
|
||||
/* Set MQS configuration. */
|
||||
IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
|
||||
/* Set ENET Ref clock source. */
|
||||
IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
|
||||
/* Set ENET2 Ref clock source. */
|
||||
IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
|
||||
/* Set GPT1 High frequency reference clock source. */
|
||||
IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
|
||||
/* Set GPT2 High frequency reference clock source. */
|
||||
IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
|
||||
/* Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
|
||||
}
|
||||
|
||||
@@ -0,0 +1,116 @@
|
||||
#ifndef _CLOCK_CONFIG_H_
|
||||
#define _CLOCK_CONFIG_H_
|
||||
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
|
||||
|
||||
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes default configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootClocks(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
********************** Configuration BOARD_BootClockRUN ***********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
|
||||
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL
|
||||
#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL
|
||||
#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL
|
||||
#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 264000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 261818181UL
|
||||
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
|
||||
#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 24000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
|
||||
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 0UL
|
||||
#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL
|
||||
#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL
|
||||
|
||||
/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
|
||||
*/
|
||||
extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
|
||||
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
|
||||
*/
|
||||
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
|
||||
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
|
||||
*/
|
||||
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockRUN(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
#endif /* _CLOCK_CONFIG_H_ */
|
||||
|
||||
@@ -0,0 +1,64 @@
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v13.1
|
||||
processor: MIMXRT1061xxxxB
|
||||
package_id: MIMXRT1061CVL5B
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 13.0.2
|
||||
pin_labels:
|
||||
- {pin_num: G11, pin_signal: GPIO_AD_B0_03, label: BSP_BEEP}
|
||||
- {pin_num: L13, pin_signal: GPIO_AD_B1_10, label: BSP_RS485_RE, identifier: CSI_D7}
|
||||
- {pin_num: J13, pin_signal: GPIO_AD_B1_11, label: BSP_DS18B20, identifier: CSI_D6}
|
||||
- {pin_num: K12, pin_signal: GPIO_AD_B1_05, label: BSP_AP3216C_INT, identifier: CSI_MCLK}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_iomuxc.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void) {
|
||||
}
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12}
|
||||
- {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13}
|
||||
- {pin_num: L11, peripheral: LPUART2, signal: TX, pin_signal: GPIO_AD_B1_02}
|
||||
- {pin_num: M12, peripheral: LPUART2, signal: RX, pin_signal: GPIO_AD_B1_03}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_02_LPUART2_TX, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_03_LPUART2_RX, 0U);
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -0,0 +1,57 @@
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Definitions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/*! @brief Direction type */
|
||||
typedef enum _pin_mux_direction
|
||||
{
|
||||
kPIN_MUX_DirectionInput = 0U, /* Input direction */
|
||||
kPIN_MUX_DirectionOutput = 1U, /* Output direction */
|
||||
kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */
|
||||
} pin_mux_direction_t;
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
Binary file not shown.
@@ -0,0 +1,17 @@
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
|
||||
# add the general drivers.
|
||||
src = Split("""
|
||||
board.c
|
||||
MCUX_Config/clock_config.c
|
||||
MCUX_Config/pin_mux.c
|
||||
""")
|
||||
|
||||
CPPPATH = [cwd,cwd + '/MCUX_Config',cwd + '/ports']
|
||||
CPPDEFINES = ['CPU_MIMXRT1061CVL5A', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1','XIP_EXTERNAL_FLASH=1']
|
||||
|
||||
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
|
||||
|
||||
Return('group')
|
||||
@@ -0,0 +1,138 @@
|
||||
/*
|
||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2009-01-05 Bernard first implementation
|
||||
* 2023-05-09 xym-ee port to this bsp
|
||||
*/
|
||||
|
||||
#include <rthw.h>
|
||||
#include <rtthread.h>
|
||||
#include "board.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
#ifdef BSP_USING_DMA
|
||||
#include "fsl_dmamux.h"
|
||||
#include "fsl_edma.h"
|
||||
#endif
|
||||
|
||||
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
|
||||
4 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
|
||||
3 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
|
||||
2 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
|
||||
1 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
|
||||
0 bits for subpriority */
|
||||
|
||||
/* MPU configuration. */
|
||||
static void BOARD_ConfigMPU(void)
|
||||
{
|
||||
/* Disable I cache and D cache */
|
||||
SCB_DisableICache();
|
||||
SCB_DisableDCache();
|
||||
|
||||
/* Disable MPU */
|
||||
ARM_MPU_Disable();
|
||||
|
||||
/* Region 0 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(0, 0xC0000000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
|
||||
|
||||
/* Region 1 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(1, 0x80000000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
|
||||
|
||||
/* Region 2 setting */
|
||||
// spi flash: normal type, cacheable, no bufferable, no shareable
|
||||
MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_512MB);
|
||||
|
||||
/* Region 3 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(3, 0x00000000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
|
||||
|
||||
/* Region 4 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(4, 0x00000000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
|
||||
|
||||
/* Region 5 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(5, 0x20000000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
|
||||
|
||||
/* Region 6 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(6, 0x20200000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_256KB);
|
||||
|
||||
#if defined(BSP_USING_SDRAM)
|
||||
/* Region 7 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(7, 0x80000000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_32MB);
|
||||
|
||||
/* Region 8 setting */
|
||||
MPU->RBAR = ARM_MPU_RBAR(8, 0x81E00000U);
|
||||
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 1, 1, 0, 0, 0, ARM_MPU_REGION_SIZE_2MB);
|
||||
#endif
|
||||
|
||||
/* Enable MPU */
|
||||
ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk);
|
||||
|
||||
/* Enable I cache and D cache */
|
||||
SCB_EnableDCache();
|
||||
SCB_EnableICache();
|
||||
}
|
||||
|
||||
|
||||
/* This is the timer interrupt service routine. */
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* enter interrupt */
|
||||
rt_interrupt_enter();
|
||||
|
||||
rt_tick_increase();
|
||||
|
||||
/* leave interrupt */
|
||||
rt_interrupt_leave();
|
||||
}
|
||||
|
||||
#ifdef BSP_USING_DMA
|
||||
void imxrt_dma_init(void)
|
||||
{
|
||||
edma_config_t config;
|
||||
|
||||
DMAMUX_Init(DMAMUX);
|
||||
EDMA_GetDefaultConfig(&config);
|
||||
EDMA_Init(DMA0, &config);
|
||||
}
|
||||
#endif
|
||||
|
||||
void rt_hw_board_init()
|
||||
{
|
||||
BOARD_ConfigMPU();
|
||||
BOARD_InitPins();
|
||||
BOARD_BootClockRUN();
|
||||
|
||||
NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
||||
SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
|
||||
|
||||
#ifdef BSP_USING_DMA
|
||||
imxrt_dma_init();
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_HEAP
|
||||
rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_COMPONENTS_INIT
|
||||
rt_components_board_init();
|
||||
#endif
|
||||
|
||||
#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE)
|
||||
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
|
||||
#endif
|
||||
}
|
||||
@@ -0,0 +1,44 @@
|
||||
/*
|
||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2009-09-22 Bernard add board.h to this bsp
|
||||
* 2023-05-09 xym-ee port to this bsp
|
||||
*/
|
||||
|
||||
// <<< Use Configuration Wizard in Context Menu >>>
|
||||
#ifndef __BOARD_H__
|
||||
#define __BOARD_H__
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "clock_config.h"
|
||||
#include "drv_gpio.h"
|
||||
|
||||
#ifdef __CC_ARM
|
||||
extern int Image$$RTT_HEAP$$ZI$$Base;
|
||||
extern int Image$$RTT_HEAP$$ZI$$Limit;
|
||||
#define HEAP_BEGIN (&Image$$RTT_HEAP$$ZI$$Base)
|
||||
#define HEAP_END (&Image$$RTT_HEAP$$ZI$$Limit)
|
||||
|
||||
#elif __ICCARM__
|
||||
#pragma section="HEAP"
|
||||
#define HEAP_BEGIN (__segment_end("HEAP"))
|
||||
extern void __RTT_HEAP_END;
|
||||
#define HEAP_END (&__RTT_HEAP_END)
|
||||
|
||||
#else
|
||||
extern int heap_start;
|
||||
extern int heap_end;
|
||||
#define HEAP_BEGIN (&heap_start)
|
||||
#define HEAP_END (&heap_end)
|
||||
#endif
|
||||
|
||||
#define HEAP_SIZE ((uint32_t)HEAP_END - (uint32_t)HEAP_BEGIN)
|
||||
|
||||
void rt_hw_board_init(void);
|
||||
|
||||
#endif
|
||||
|
||||
@@ -0,0 +1,87 @@
|
||||
/*
|
||||
* Copyright 2018 NXP
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* o Redistributions of source code must retain the above copyright notice, this list
|
||||
* of conditions and the following disclaimer.
|
||||
*
|
||||
* o Redistributions in binary form must reproduce the above copyright notice, this
|
||||
* list of conditions and the following disclaimer in the documentation and/or
|
||||
* other materials provided with the distribution.
|
||||
*
|
||||
* o Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
_load_dcdc_trim()
|
||||
{
|
||||
__var ocotp_base;
|
||||
__var ocotp_fuse_bank0_base;
|
||||
__var dcdc_base;
|
||||
__var reg;
|
||||
__var trim_value;
|
||||
__var dcdc_trim_loaded;
|
||||
__var index;
|
||||
|
||||
ocotp_base = 0x401F4000;
|
||||
ocotp_fuse_bank0_base = 0x401F4000 + 0x400;
|
||||
dcdc_base = 0x40080000;
|
||||
|
||||
dcdc_trim_loaded = 0;
|
||||
|
||||
reg = __readMemory32(ocotp_fuse_bank0_base + 0x90, "Memory");
|
||||
if (reg & (1<<10))
|
||||
{
|
||||
// DCDC: REG0->VBG_TRM
|
||||
trim_value = (reg & (0x1F << 11)) >> 11;
|
||||
reg = (__readMemory32(dcdc_base + 0x4, "Memory") & ~(0x1F << 24)) | (trim_value << 24);
|
||||
__writeMemory32(reg, dcdc_base + 0x4, "Memory");
|
||||
dcdc_trim_loaded = 1;
|
||||
}
|
||||
|
||||
reg = __readMemory32(ocotp_fuse_bank0_base + 0x80, "Memory");
|
||||
if (reg & (1<<30))
|
||||
{
|
||||
index = (reg & (3 << 28)) >> 28;
|
||||
if (index < 4)
|
||||
{
|
||||
// DCDC: REG3->TRG
|
||||
reg = (__readMemory32(dcdc_base + 0xC, "Memory") & ~(0x1F)) | (0xF + index);
|
||||
__writeMemory32(reg, dcdc_base + 0xC, "Memory");
|
||||
dcdc_trim_loaded = 1;
|
||||
}
|
||||
}
|
||||
|
||||
if (dcdc_trim_loaded)
|
||||
{
|
||||
// delay 1ms for dcdc to get stable
|
||||
__delay(1);
|
||||
__message "DCDC trim value loaded.\n";
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
execUserPreload()
|
||||
{
|
||||
_load_dcdc_trim();
|
||||
}
|
||||
|
||||
execUserReset()
|
||||
{
|
||||
_load_dcdc_trim();
|
||||
}
|
||||
|
||||
@@ -0,0 +1,94 @@
|
||||
/*
|
||||
** ###################################################################
|
||||
** Processors: MIMXRT1062CVJ5A
|
||||
** MIMXRT1062CVL5A
|
||||
** MIMXRT1062DVJ6A
|
||||
** MIMXRT1062DVL6A
|
||||
**
|
||||
** Compiler: IAR ANSI C/C++ Compiler for ARM
|
||||
** Reference manual: IMXRT1060RM Rev. B, 07/2018
|
||||
** Version: rev. 0.1, 2017-01-10
|
||||
** Build: b180801
|
||||
**
|
||||
** Abstract:
|
||||
** Linker file for the IAR ANSI C/C++ Compiler for ARM
|
||||
**
|
||||
** Copyright 2016 Freescale Semiconductor, Inc.
|
||||
** Copyright 2016-2018 NXP
|
||||
**
|
||||
** SPDX-License-Identifier: BSD-3-Clause
|
||||
**
|
||||
** http: www.nxp.com
|
||||
** mail: support@nxp.com
|
||||
**
|
||||
** ###################################################################
|
||||
*/
|
||||
|
||||
define symbol m_interrupts_start = 0x60002000;
|
||||
define symbol m_interrupts_end = 0x600023FF;
|
||||
|
||||
define symbol m_text_start = 0x60002400;
|
||||
define symbol m_text_end = 0x607FFFFF;
|
||||
|
||||
define symbol m_data_start = 0x20000000;
|
||||
define symbol m_data_end = 0x2001FFFF;
|
||||
|
||||
define symbol m_data2_start = 0x20200000;
|
||||
define symbol m_data2_end = 0x202BFFFF;
|
||||
|
||||
define exported symbol m_boot_hdr_conf_start = 0x60000000;
|
||||
define symbol m_boot_hdr_ivt_start = 0x60001000;
|
||||
define symbol m_boot_hdr_boot_data_start = 0x60001020;
|
||||
define symbol m_boot_hdr_dcd_data_start = 0x60001030;
|
||||
|
||||
/* Sizes */
|
||||
if (isdefinedsymbol(__stack_size__)) {
|
||||
define symbol __size_cstack__ = __stack_size__;
|
||||
} else {
|
||||
define symbol __size_cstack__ = 0x0400;
|
||||
}
|
||||
|
||||
if (isdefinedsymbol(__heap_size__)) {
|
||||
define symbol __size_heap__ = __heap_size__;
|
||||
} else {
|
||||
define symbol __size_heap__ = 0x0400;
|
||||
}
|
||||
|
||||
define exported symbol __VECTOR_TABLE = m_interrupts_start;
|
||||
define exported symbol __VECTOR_RAM = m_interrupts_start;
|
||||
define exported symbol __RAM_VECTOR_TABLE_SIZE = 0x0;
|
||||
define exported symbol __RTT_HEAP_END = m_data2_end;
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region TEXT_region = mem:[from m_interrupts_start to m_interrupts_end]
|
||||
| mem:[from m_text_start to m_text_end];
|
||||
|
||||
define region DATA_region = mem:[from m_data_start to m_data_end-__size_cstack__];
|
||||
define region DATA2_region = mem:[from m_data2_start to m_data2_end];
|
||||
define region CSTACK_region = mem:[from m_data_end-__size_cstack__+1 to m_data_end];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __size_heap__ { };
|
||||
define block RW { readwrite };
|
||||
define block ZI { zi };
|
||||
define block NCACHE_VAR { section NonCacheable , section NonCacheable.init };
|
||||
|
||||
initialize by copy { readwrite, section .textrw };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem: m_interrupts_start { readonly section .intvec };
|
||||
|
||||
place at address mem:m_boot_hdr_conf_start { section .boot_hdr.conf };
|
||||
place at address mem:m_boot_hdr_ivt_start { section .boot_hdr.ivt };
|
||||
place at address mem:m_boot_hdr_boot_data_start { readonly section .boot_hdr.boot_data };
|
||||
place at address mem:m_boot_hdr_dcd_data_start { readonly section .boot_hdr.dcd_data };
|
||||
|
||||
keep{ section .boot_hdr.conf, section .boot_hdr.ivt, section .boot_hdr.boot_data, section .boot_hdr.dcd_data };
|
||||
|
||||
place in TEXT_region { readonly };
|
||||
place in DATA_region { block RW };
|
||||
place in DATA_region { block ZI };
|
||||
place in DATA_region { last block HEAP };
|
||||
place in DATA_region { block NCACHE_VAR };
|
||||
place in CSTACK_region { block CSTACK };
|
||||
|
||||
@@ -0,0 +1,298 @@
|
||||
/*
|
||||
** ###################################################################
|
||||
** Processors: MIMXRT1052CVJ5B
|
||||
** MIMXRT1052CVL5B
|
||||
** MIMXRT1052DVJ6B
|
||||
** MIMXRT1052DVL6B
|
||||
**
|
||||
** Compiler: GNU C Compiler
|
||||
** Reference manual: IMXRT1050RM Rev.1, 03/2018
|
||||
** Version: rev. 0.1, 2017-01-10
|
||||
** Build: b180509
|
||||
**
|
||||
** Abstract:
|
||||
** Linker file for the GNU C Compiler
|
||||
**
|
||||
** The Clear BSD License
|
||||
** Copyright 2016 Freescale Semiconductor, Inc.
|
||||
** Copyright 2016-2018 NXP
|
||||
** All rights reserved.
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without
|
||||
** modification, are permitted (subject to the limitations in the
|
||||
** disclaimer below) provided that the following conditions are met:
|
||||
**
|
||||
** * Redistributions of source code must retain the above copyright
|
||||
** notice, this list of conditions and the following disclaimer.
|
||||
**
|
||||
** * Redistributions in binary form must reproduce the above copyright
|
||||
** notice, this list of conditions and the following disclaimer in the
|
||||
** documentation and/or other materials provided with the distribution.
|
||||
**
|
||||
** * Neither the name of the copyright holder nor the names of its
|
||||
** contributors may be used to endorse or promote products derived from
|
||||
** this software without specific prior written permission.
|
||||
**
|
||||
** NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
|
||||
** GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
|
||||
** HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
** WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
** MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
||||
** LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
** IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
** http: www.nxp.com
|
||||
** mail: support@nxp.com
|
||||
**
|
||||
** ###################################################################
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400;
|
||||
STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400;
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
m_flash_config (RX) : ORIGIN = 0x60000000, LENGTH = 0x00001000
|
||||
m_ivt (RX) : ORIGIN = 0x60001000, LENGTH = 0x00001000
|
||||
m_interrupts (RX) : ORIGIN = 0x60002000, LENGTH = 0x00000400
|
||||
m_text (RX) : ORIGIN = 0x60002400, LENGTH = 0x01FFDC00
|
||||
m_data (RW) : ORIGIN = 0x20000000, LENGTH = 0x00020000
|
||||
m_data2 (RW) : ORIGIN = 0x20200000, LENGTH = 0x00040000
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
.flash_config :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__FLASH_BASE = .;
|
||||
KEEP(* (.boot_hdr.conf)) /* flash config section */
|
||||
. = ALIGN(4);
|
||||
} > m_flash_config
|
||||
|
||||
ivt_begin = ORIGIN(m_flash_config) + LENGTH(m_flash_config);
|
||||
|
||||
.ivt : AT(ivt_begin)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(* (.boot_hdr.ivt)) /* ivt section */
|
||||
KEEP(* (.boot_hdr.boot_data)) /* boot section */
|
||||
KEEP(* (.boot_hdr.dcd_data)) /* dcd section */
|
||||
. = ALIGN(4);
|
||||
} > m_ivt
|
||||
|
||||
/* The startup code goes first into internal RAM */
|
||||
.interrupts :
|
||||
{
|
||||
__VECTOR_TABLE = .;
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} > m_interrupts
|
||||
|
||||
__VECTOR_RAM = __VECTOR_TABLE;
|
||||
__RAM_VECTOR_TABLE_SIZE_BYTES = 0x0;
|
||||
|
||||
/* The program code and other data goes into internal RAM */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
. = ALIGN(4);
|
||||
|
||||
/* section information for finsh shell */
|
||||
. = ALIGN(4);
|
||||
__fsymtab_start = .;
|
||||
KEEP(*(FSymTab))
|
||||
__fsymtab_end = .;
|
||||
. = ALIGN(4);
|
||||
__vsymtab_start = .;
|
||||
KEEP(*(VSymTab))
|
||||
__vsymtab_end = .;
|
||||
. = ALIGN(4);
|
||||
|
||||
/* section information for initial. */
|
||||
. = ALIGN(4);
|
||||
__rt_init_start = .;
|
||||
KEEP(*(SORT(.rti_fn*)))
|
||||
__rt_init_end = .;
|
||||
} > m_text
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} > m_text
|
||||
|
||||
.ARM :
|
||||
{
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} > m_text
|
||||
|
||||
.ctors :
|
||||
{
|
||||
__CTOR_LIST__ = .;
|
||||
/* gcc uses crtbegin.o to find the start of
|
||||
the constructors, so we make sure it is
|
||||
first. Because this is a wildcard, it
|
||||
doesn't matter if the user does not
|
||||
actually link against crtbegin.o; the
|
||||
linker won't look for a file to match a
|
||||
wildcard. The wildcard also means that it
|
||||
doesn't matter which directory crtbegin.o
|
||||
is in. */
|
||||
KEEP (*crtbegin.o(.ctors))
|
||||
KEEP (*crtbegin?.o(.ctors))
|
||||
/* We don't want to include the .ctor section from
|
||||
from the crtend.o file until after the sorted ctors.
|
||||
The .ctor section from the crtend file contains the
|
||||
end of ctors marker and it must be last */
|
||||
KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors))
|
||||
KEEP (*(SORT(.ctors.*)))
|
||||
KEEP (*(.ctors))
|
||||
__CTOR_END__ = .;
|
||||
} > m_text
|
||||
|
||||
.dtors :
|
||||
{
|
||||
__DTOR_LIST__ = .;
|
||||
KEEP (*crtbegin.o(.dtors))
|
||||
KEEP (*crtbegin?.o(.dtors))
|
||||
KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors))
|
||||
KEEP (*(SORT(.dtors.*)))
|
||||
KEEP (*(.dtors))
|
||||
__DTOR_END__ = .;
|
||||
} > m_text
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} > m_text
|
||||
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} > m_text
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} > m_text
|
||||
|
||||
__etext = .; /* define a global symbol at end of code */
|
||||
__DATA_ROM = .; /* Symbol is used by startup for data initialization */
|
||||
|
||||
.data : AT(__DATA_ROM)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__DATA_RAM = .;
|
||||
__data_start__ = .; /* create a global symbol at data start */
|
||||
*(m_usb_dma_init_data)
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
KEEP(*(.jcr*))
|
||||
. = ALIGN(4);
|
||||
__data_end__ = .; /* define a global symbol at data end */
|
||||
} > m_data
|
||||
|
||||
__NDATA_ROM = __DATA_ROM + (__data_end__ - __data_start__);
|
||||
.ncache.init : AT(__NDATA_ROM)
|
||||
{
|
||||
__noncachedata_start__ = .; /* create a global symbol at ncache data start */
|
||||
*(NonCacheable.init)
|
||||
. = ALIGN(4);
|
||||
__noncachedata_init_end__ = .; /* create a global symbol at initialized ncache data end */
|
||||
} > m_data
|
||||
. = __noncachedata_init_end__;
|
||||
.ncache :
|
||||
{
|
||||
*(NonCacheable)
|
||||
. = ALIGN(4);
|
||||
__noncachedata_end__ = .; /* define a global symbol at ncache data end */
|
||||
} > m_data
|
||||
|
||||
__DATA_END = __NDATA_ROM + (__noncachedata_init_end__ - __noncachedata_start__);
|
||||
text_end = ORIGIN(m_text) + LENGTH(m_text);
|
||||
ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data")
|
||||
|
||||
/* Uninitialized data section */
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
. = ALIGN(4);
|
||||
__START_BSS = .;
|
||||
__bss_start__ = .;
|
||||
*(m_usb_dma_noninit_data)
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
__bss_end__ = .;
|
||||
__END_BSS = .;
|
||||
} > m_data
|
||||
|
||||
.heap :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
__end__ = .;
|
||||
PROVIDE(end = .);
|
||||
__HeapBase = .;
|
||||
. += HEAP_SIZE;
|
||||
__HeapLimit = .;
|
||||
__heap_limit = .; /* Add for _sbrk */
|
||||
} > m_data
|
||||
|
||||
.stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
stack_start = .;
|
||||
. += STACK_SIZE;
|
||||
stack_end = .;
|
||||
__StackTop = .;
|
||||
} > m_data
|
||||
|
||||
.RTT_HEAP :
|
||||
{
|
||||
heap_start = .;
|
||||
. = ALIGN(8);
|
||||
} > m_data
|
||||
|
||||
PROVIDE(heap_end = ORIGIN(m_data) + LENGTH(m_data));
|
||||
|
||||
/* Initializes stack on the end of block */
|
||||
__StackLimit = __StackTop - STACK_SIZE;
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap")
|
||||
}
|
||||
|
||||
@@ -0,0 +1,88 @@
|
||||
#! armcc -E
|
||||
/*
|
||||
** ###################################################################
|
||||
** Processors: MIMXRT1062CVJ5A
|
||||
** MIMXRT1062CVL5A
|
||||
** MIMXRT1062DVJ6A
|
||||
** MIMXRT1062DVL6A
|
||||
**
|
||||
** Compiler: Keil ARM C/C++ Compiler
|
||||
** Reference manual: IMXRT1060RM Rev. B, 07/2018
|
||||
** Version: rev. 0.1, 2017-01-10
|
||||
** Build: b180819
|
||||
**
|
||||
** Abstract:
|
||||
** Linker file for the Keil ARM C/C++ Compiler
|
||||
**
|
||||
** Copyright 2016 Freescale Semiconductor, Inc.
|
||||
** Copyright 2016-2018 NXP
|
||||
**
|
||||
** SPDX-License-Identifier: BSD-3-Clause
|
||||
**
|
||||
** http: www.nxp.com
|
||||
** mail: support@nxp.com
|
||||
**
|
||||
** ###################################################################
|
||||
*/
|
||||
|
||||
#define m_flash_config_start 0x60000000
|
||||
#define m_flash_config_size 0x00001000
|
||||
|
||||
#define m_ivt_start 0x60001000
|
||||
#define m_ivt_size 0x00001000
|
||||
|
||||
#define m_interrupts_start 0x60002000
|
||||
#define m_interrupts_size 0x00000400
|
||||
|
||||
#define m_text_start 0x60002400
|
||||
#define m_text_size 0x003FDC00
|
||||
|
||||
#define m_data_start 0x20200000
|
||||
#define m_data_size 0x00100000
|
||||
|
||||
/* Sizes */
|
||||
#if (defined(__stack_size__))
|
||||
#define Stack_Size __stack_size__
|
||||
#else
|
||||
#define Stack_Size 0x0400
|
||||
#endif
|
||||
|
||||
#if (defined(__heap_size__))
|
||||
#define Heap_Size __heap_size__
|
||||
#else
|
||||
#define Heap_Size 0x0400
|
||||
#endif
|
||||
|
||||
#define RTT_HEAP_SIZE (m_data_size-ImageLength(RW_m_data)-ImageLength(ARM_LIB_HEAP)-ImageLength(ARM_LIB_STACK))
|
||||
|
||||
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
|
||||
LR_m_text m_flash_config_start m_text_start+m_text_size-m_flash_config_start { ; load region size_region
|
||||
RW_m_config_text m_flash_config_start FIXED m_flash_config_size { ; load address = execution address
|
||||
* (.boot_hdr.conf, +FIRST)
|
||||
}
|
||||
|
||||
RW_m_ivt_text m_ivt_start FIXED m_ivt_size { ; load address = execution address
|
||||
* (.boot_hdr.ivt, +FIRST)
|
||||
* (.boot_hdr.boot_data)
|
||||
* (.boot_hdr.dcd_data)
|
||||
}
|
||||
#else
|
||||
LR_m_text m_interrupts_start m_text_start+m_text_size-m_interrupts_start { ; load region size_region
|
||||
#endif
|
||||
VECTOR_ROM m_interrupts_start FIXED m_interrupts_size { ; load address = execution address
|
||||
* (RESET,+FIRST)
|
||||
}
|
||||
ER_m_text m_text_start FIXED m_text_size { ; load address = execution address
|
||||
* (InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
RW_m_data m_data_start m_data_size-Stack_Size-Heap_Size { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
* (NonCacheable.init)
|
||||
* (NonCacheable)
|
||||
}
|
||||
ARM_LIB_HEAP +0 EMPTY Heap_Size { ; Heap region growing up
|
||||
}
|
||||
ARM_LIB_STACK +0 EMPTY Stack_Size{} ; Stack region growing down
|
||||
RTT_HEAP +0 EMPTY RTT_HEAP_SIZE{}
|
||||
}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 267 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 25 KiB |
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,10 @@
|
||||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\project.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,247 @@
|
||||
#ifndef RT_CONFIG_H__
|
||||
#define RT_CONFIG_H__
|
||||
|
||||
/* Automatically generated file; DO NOT EDIT. */
|
||||
/* RT-Thread Configuration */
|
||||
|
||||
/* RT-Thread Kernel */
|
||||
|
||||
#define RT_NAME_MAX 8
|
||||
#define RT_ALIGN_SIZE 8
|
||||
#define RT_THREAD_PRIORITY_32
|
||||
#define RT_THREAD_PRIORITY_MAX 32
|
||||
#define RT_TICK_PER_SECOND 100
|
||||
#define RT_USING_OVERFLOW_CHECK
|
||||
#define RT_USING_HOOK
|
||||
#define RT_HOOK_USING_FUNC_PTR
|
||||
#define RT_USING_IDLE_HOOK
|
||||
#define RT_IDLE_HOOK_LIST_SIZE 4
|
||||
#define IDLE_THREAD_STACK_SIZE 256
|
||||
|
||||
/* kservice optimization */
|
||||
|
||||
#define RT_DEBUG
|
||||
#define RT_DEBUG_COLOR
|
||||
|
||||
/* Inter-Thread communication */
|
||||
|
||||
#define RT_USING_SEMAPHORE
|
||||
#define RT_USING_MUTEX
|
||||
#define RT_USING_EVENT
|
||||
#define RT_USING_MAILBOX
|
||||
#define RT_USING_MESSAGEQUEUE
|
||||
|
||||
/* Memory Management */
|
||||
|
||||
#define RT_USING_MEMPOOL
|
||||
#define RT_USING_MEMHEAP
|
||||
#define RT_MEMHEAP_FAST_MODE
|
||||
#define RT_USING_MEMHEAP_AS_HEAP
|
||||
#define RT_USING_MEMHEAP_AUTO_BINDING
|
||||
#define RT_USING_HEAP
|
||||
|
||||
/* Kernel Device Object */
|
||||
|
||||
#define RT_USING_DEVICE
|
||||
#define RT_USING_CONSOLE
|
||||
#define RT_CONSOLEBUF_SIZE 128
|
||||
#define RT_CONSOLE_DEVICE_NAME "uart1"
|
||||
#define RT_VER_NUM 0x50001
|
||||
#define RT_USING_CACHE
|
||||
#define RT_USING_HW_ATOMIC
|
||||
#define RT_USING_CPU_FFS
|
||||
#define ARCH_ARM
|
||||
#define ARCH_ARM_CORTEX_M
|
||||
#define ARCH_ARM_CORTEX_FPU
|
||||
#define ARCH_ARM_CORTEX_M7
|
||||
|
||||
/* RT-Thread Components */
|
||||
|
||||
#define RT_USING_COMPONENTS_INIT
|
||||
#define RT_USING_USER_MAIN
|
||||
#define RT_MAIN_THREAD_STACK_SIZE 2048
|
||||
#define RT_MAIN_THREAD_PRIORITY 10
|
||||
#define RT_USING_MSH
|
||||
#define RT_USING_FINSH
|
||||
#define FINSH_USING_MSH
|
||||
#define FINSH_THREAD_NAME "tshell"
|
||||
#define FINSH_THREAD_PRIORITY 20
|
||||
#define FINSH_THREAD_STACK_SIZE 4096
|
||||
#define FINSH_USING_HISTORY
|
||||
#define FINSH_HISTORY_LINES 5
|
||||
#define FINSH_USING_SYMTAB
|
||||
#define FINSH_CMD_SIZE 80
|
||||
#define MSH_USING_BUILT_IN_COMMANDS
|
||||
#define FINSH_USING_DESCRIPTION
|
||||
#define FINSH_ARG_MAX 10
|
||||
|
||||
/* DFS: device virtual file system */
|
||||
|
||||
|
||||
/* Device Drivers */
|
||||
|
||||
#define RT_USING_DEVICE_IPC
|
||||
#define RT_UNAMED_PIPE_NUMBER 64
|
||||
#define RT_USING_SERIAL
|
||||
#define RT_USING_SERIAL_V1
|
||||
#define RT_SERIAL_USING_DMA
|
||||
#define RT_SERIAL_RB_BUFSZ 64
|
||||
#define RT_USING_PIN
|
||||
|
||||
/* Using USB */
|
||||
|
||||
|
||||
/* C/C++ and POSIX layer */
|
||||
|
||||
#define RT_LIBC_DEFAULT_TIMEZONE 8
|
||||
|
||||
/* POSIX (Portable Operating System Interface) layer */
|
||||
|
||||
|
||||
/* Interprocess Communication (IPC) */
|
||||
|
||||
|
||||
/* Socket is in the 'Network' category */
|
||||
|
||||
|
||||
/* Network */
|
||||
|
||||
|
||||
/* Utilities */
|
||||
|
||||
|
||||
/* RT-Thread Utestcases */
|
||||
|
||||
|
||||
/* RT-Thread online packages */
|
||||
|
||||
/* IoT - internet of things */
|
||||
|
||||
|
||||
/* Wi-Fi */
|
||||
|
||||
/* Marvell WiFi */
|
||||
|
||||
|
||||
/* Wiced WiFi */
|
||||
|
||||
|
||||
/* IoT Cloud */
|
||||
|
||||
|
||||
/* security packages */
|
||||
|
||||
|
||||
/* language packages */
|
||||
|
||||
/* JSON: JavaScript Object Notation, a lightweight data-interchange format */
|
||||
|
||||
|
||||
/* XML: Extensible Markup Language */
|
||||
|
||||
|
||||
/* multimedia packages */
|
||||
|
||||
/* LVGL: powerful and easy-to-use embedded GUI library */
|
||||
|
||||
|
||||
/* u8g2: a monochrome graphic library */
|
||||
|
||||
|
||||
/* tools packages */
|
||||
|
||||
|
||||
/* system packages */
|
||||
|
||||
/* enhanced kernel services */
|
||||
|
||||
|
||||
/* acceleration: Assembly language or algorithmic acceleration packages */
|
||||
|
||||
|
||||
/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
|
||||
|
||||
|
||||
/* Micrium: Micrium software products porting for RT-Thread */
|
||||
|
||||
|
||||
/* peripheral libraries and drivers */
|
||||
|
||||
/* sensors drivers */
|
||||
|
||||
|
||||
/* touch drivers */
|
||||
|
||||
|
||||
/* Kendryte SDK */
|
||||
|
||||
|
||||
/* AI packages */
|
||||
|
||||
|
||||
/* Signal Processing and Control Algorithm Packages */
|
||||
|
||||
|
||||
/* miscellaneous packages */
|
||||
|
||||
/* project laboratory */
|
||||
|
||||
/* samples: kernel and components samples */
|
||||
|
||||
|
||||
/* entertainment: terminal games and other interesting software packages */
|
||||
|
||||
|
||||
/* Arduino libraries */
|
||||
|
||||
|
||||
/* Projects */
|
||||
|
||||
|
||||
/* Sensors */
|
||||
|
||||
|
||||
/* Display */
|
||||
|
||||
|
||||
/* Timing */
|
||||
|
||||
|
||||
/* Data Processing */
|
||||
|
||||
|
||||
/* Data Storage */
|
||||
|
||||
/* Communication */
|
||||
|
||||
|
||||
/* Device Control */
|
||||
|
||||
|
||||
/* Other */
|
||||
|
||||
|
||||
/* Signal IO */
|
||||
|
||||
|
||||
/* Uncategorized */
|
||||
|
||||
#define SOC_IMXRT1060_SERIES
|
||||
|
||||
/* Hardware Drivers Config */
|
||||
|
||||
#define SOC_IMXRT1061CVL5A
|
||||
|
||||
/* On-chip Peripheral Drivers */
|
||||
|
||||
#define BSP_USING_GPIO
|
||||
#define BSP_USING_LPUART
|
||||
#define BSP_USING_LPUART1
|
||||
|
||||
/* Onboard Peripheral Drivers */
|
||||
|
||||
|
||||
/* Board extended module Drivers */
|
||||
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,162 @@
|
||||
import os
|
||||
import sys
|
||||
|
||||
# toolchains options
|
||||
ARCH='arm'
|
||||
CPU='cortex-m7'
|
||||
CROSS_TOOL='gcc'
|
||||
|
||||
# bsp lib config
|
||||
BSP_LIBRARY_TYPE = None
|
||||
|
||||
if os.getenv('RTT_CC'):
|
||||
CROSS_TOOL = os.getenv('RTT_CC')
|
||||
if os.getenv('RTT_ROOT'):
|
||||
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||
|
||||
# cross_tool provides the cross compiler
|
||||
# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
|
||||
if CROSS_TOOL == 'gcc':
|
||||
PLATFORM = 'gcc'
|
||||
EXEC_PATH = r'C:\Users\XXYYZZ'
|
||||
elif CROSS_TOOL == 'keil':
|
||||
PLATFORM = 'armcc'
|
||||
EXEC_PATH = r'C:/Keil_v5'
|
||||
elif CROSS_TOOL == 'iar':
|
||||
PLATFORM = 'iccarm'
|
||||
EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.3'
|
||||
|
||||
if os.getenv('RTT_EXEC_PATH'):
|
||||
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
|
||||
|
||||
BUILD = 'debug'
|
||||
#BUILD = 'release'
|
||||
|
||||
if PLATFORM == 'gcc':
|
||||
PREFIX = 'arm-none-eabi-'
|
||||
CC = PREFIX + 'gcc'
|
||||
CXX = PREFIX + 'g++'
|
||||
AS = PREFIX + 'gcc'
|
||||
AR = PREFIX + 'ar'
|
||||
LINK = PREFIX + 'gcc'
|
||||
TARGET_EXT = 'elf'
|
||||
SIZE = PREFIX + 'size'
|
||||
OBJDUMP = PREFIX + 'objdump'
|
||||
OBJCPY = PREFIX + 'objcopy'
|
||||
STRIP = PREFIX + 'strip'
|
||||
|
||||
DEVICE = ' -mcpu=' + CPU + ' -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
|
||||
CFLAGS = DEVICE + ' -Wall -D__FPU_PRESENT -eentry'
|
||||
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb -D__START=entry'
|
||||
LFLAGS = DEVICE + ' -lm -lgcc -lc' + ' -nostartfiles -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
|
||||
|
||||
CPATH = ''
|
||||
LPATH = ''
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' -gdwarf-2'
|
||||
AFLAGS += ' -gdwarf-2'
|
||||
CFLAGS += ' -O0'
|
||||
else:
|
||||
CFLAGS += ' -O2 -Os'
|
||||
|
||||
POST_ACTION = OBJCPY + ' -O binary --remove-section=.boot_data --remove-section=.image_vertor_table --remove-section=.ncache $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
|
||||
|
||||
# module setting
|
||||
CXXFLAGS = ' -Woverloaded-virtual -fno-exceptions -fno-rtti '
|
||||
M_CFLAGS = CFLAGS + ' -mlong-calls -fPIC '
|
||||
M_CXXFLAGS = CXXFLAGS + ' -mlong-calls -fPIC'
|
||||
M_LFLAGS = DEVICE + CXXFLAGS + ' -Wl,--gc-sections,-z,max-page-size=0x4' +\
|
||||
' -shared -fPIC -nostartfiles -static-libgcc'
|
||||
M_POST_ACTION = STRIP + ' -R .hash $TARGET\n' + SIZE + ' $TARGET \n'
|
||||
|
||||
elif PLATFORM == 'armcc':
|
||||
CC = 'armcc'
|
||||
CXX = 'armcc'
|
||||
AS = 'armasm'
|
||||
AR = 'armar'
|
||||
LINK = 'armlink'
|
||||
TARGET_EXT = 'axf'
|
||||
|
||||
DEVICE = ' --cpu ' + CPU + '.fp.sp'
|
||||
CFLAGS = DEVICE + ' --apcs=interwork'
|
||||
AFLAGS = DEVICE
|
||||
LFLAGS = DEVICE + ' --libpath "' + EXEC_PATH + '\ARM\ARMCC\lib" --info sizes --info totals --info unused --info veneers --list rtthread.map --scatter "board\linker_scripts\link.sct"'
|
||||
|
||||
CFLAGS += ' --diag_suppress=66,1296,186,6134'
|
||||
CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
|
||||
LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
|
||||
|
||||
EXEC_PATH += '/arm/bin40/'
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' -g -O0'
|
||||
AFLAGS += ' -g'
|
||||
else:
|
||||
CFLAGS += ' -O2'
|
||||
|
||||
CXXFLAGS = CFLAGS
|
||||
CFLAGS += ' --c99'
|
||||
|
||||
POST_ACTION = 'fromelf -z $TARGET'
|
||||
# POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
|
||||
|
||||
elif PLATFORM == 'iccarm':
|
||||
CC = 'iccarm'
|
||||
CXX = 'iccarm'
|
||||
AS = 'iasmarm'
|
||||
AR = 'iarchive'
|
||||
LINK = 'ilinkarm'
|
||||
TARGET_EXT = 'out'
|
||||
|
||||
DEVICE = ' -D__FPU_PRESENT'
|
||||
|
||||
CFLAGS = DEVICE
|
||||
CFLAGS += ' --diag_suppress Pa050'
|
||||
CFLAGS += ' --no_cse'
|
||||
CFLAGS += ' --no_unroll'
|
||||
CFLAGS += ' --no_inline'
|
||||
CFLAGS += ' --no_code_motion'
|
||||
CFLAGS += ' --no_tbaa'
|
||||
CFLAGS += ' --no_clustering'
|
||||
CFLAGS += ' --no_scheduling'
|
||||
CFLAGS += ' --debug'
|
||||
CFLAGS += ' --endian=little'
|
||||
CFLAGS += ' --cpu=' + CPU
|
||||
CFLAGS += ' -e'
|
||||
CFLAGS += ' --fpu=None'
|
||||
CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
|
||||
CFLAGS += ' -Ol'
|
||||
CFLAGS += ' --use_c++_inline'
|
||||
|
||||
AFLAGS = ''
|
||||
AFLAGS += ' -s+'
|
||||
AFLAGS += ' -w+'
|
||||
AFLAGS += ' -r'
|
||||
AFLAGS += ' --cpu ' + CPU
|
||||
AFLAGS += ' --fpu None'
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' --debug'
|
||||
CFLAGS += ' -On'
|
||||
else:
|
||||
CFLAGS += ' -Oh'
|
||||
|
||||
LFLAGS = ' --config "board/linker_scripts/link.icf"'
|
||||
LFLAGS += ' --redirect _Printf=_PrintfTiny'
|
||||
LFLAGS += ' --redirect _Scanf=_ScanfSmall'
|
||||
LFLAGS += ' --entry __iar_program_start'
|
||||
|
||||
CXXFLAGS = CFLAGS
|
||||
|
||||
EXEC_PATH = EXEC_PATH + '/arm/bin/'
|
||||
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
|
||||
|
||||
def dist_handle(BSP_ROOT, dist_dir):
|
||||
import sys
|
||||
cwd_path = os.getcwd()
|
||||
sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
|
||||
from sdk_dist import dist_do_building
|
||||
dist_do_building(BSP_ROOT, dist_dir)
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,10 @@
|
||||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\template.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
@@ -0,0 +1,184 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
|
||||
|
||||
<SchemaVersion>1.0</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Extensions>
|
||||
<cExt>*.c</cExt>
|
||||
<aExt>*.s*; *.src; *.a*</aExt>
|
||||
<oExt>*.obj; *.o</oExt>
|
||||
<lExt>*.lib</lExt>
|
||||
<tExt>*.txt; *.h; *.inc; *.md</tExt>
|
||||
<pExt>*.plm</pExt>
|
||||
<CppX>*.cpp</CppX>
|
||||
<nMigrate>0</nMigrate>
|
||||
</Extensions>
|
||||
|
||||
<DaveTm>
|
||||
<dwLowDateTime>0</dwLowDateTime>
|
||||
<dwHighDateTime>0</dwHighDateTime>
|
||||
</DaveTm>
|
||||
|
||||
<Target>
|
||||
<TargetName>rtthread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<CLKADS>12000000</CLKADS>
|
||||
<OPTTT>
|
||||
<gFlags>1</gFlags>
|
||||
<BeepAtEnd>1</BeepAtEnd>
|
||||
<RunSim>0</RunSim>
|
||||
<RunTarget>1</RunTarget>
|
||||
<RunAbUc>0</RunAbUc>
|
||||
</OPTTT>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<FlashByte>65535</FlashByte>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
</OPTHX>
|
||||
<OPTLEX>
|
||||
<PageWidth>79</PageWidth>
|
||||
<PageLength>66</PageLength>
|
||||
<TabStop>8</TabStop>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
</OPTLEX>
|
||||
<ListingPage>
|
||||
<CreateCListing>1</CreateCListing>
|
||||
<CreateAListing>1</CreateAListing>
|
||||
<CreateLListing>1</CreateLListing>
|
||||
<CreateIListing>0</CreateIListing>
|
||||
<AsmCond>1</AsmCond>
|
||||
<AsmSymb>1</AsmSymb>
|
||||
<AsmXref>0</AsmXref>
|
||||
<CCond>1</CCond>
|
||||
<CCode>0</CCode>
|
||||
<CListInc>0</CListInc>
|
||||
<CSymb>0</CSymb>
|
||||
<LinkerCodeListing>0</LinkerCodeListing>
|
||||
</ListingPage>
|
||||
<OPTXL>
|
||||
<LMap>1</LMap>
|
||||
<LComments>1</LComments>
|
||||
<LGenerateSymbols>1</LGenerateSymbols>
|
||||
<LLibSym>1</LLibSym>
|
||||
<LLines>1</LLines>
|
||||
<LLocSym>1</LLocSym>
|
||||
<LPubSym>1</LPubSym>
|
||||
<LXref>0</LXref>
|
||||
<LExpSel>0</LExpSel>
|
||||
</OPTXL>
|
||||
<OPTFL>
|
||||
<tvExp>1</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>8</CpuCode>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
<sLdApp>1</sLdApp>
|
||||
<sGomain>1</sGomain>
|
||||
<sRbreak>1</sRbreak>
|
||||
<sRwatch>1</sRwatch>
|
||||
<sRmem>1</sRmem>
|
||||
<sRfunc>1</sRfunc>
|
||||
<sRbox>1</sRbox>
|
||||
<tLdApp>1</tLdApp>
|
||||
<tGomain>1</tGomain>
|
||||
<tRbreak>1</tRbreak>
|
||||
<tRwatch>1</tRwatch>
|
||||
<tRmem>1</tRmem>
|
||||
<tRfunc>0</tRfunc>
|
||||
<tRbox>1</tRbox>
|
||||
<tRtrace>1</tRtrace>
|
||||
<sRSysVw>1</sRSysVw>
|
||||
<tRSysVw>1</tRSysVw>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<bEvRecOn>1</bEvRecOn>
|
||||
<bSchkAxf>0</bSchkAxf>
|
||||
<bTchkAxf>0</bTchkAxf>
|
||||
<nTsel>0</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
<sDlgPa></sDlgPa>
|
||||
<sIfile></sIfile>
|
||||
<tDll></tDll>
|
||||
<tDllPa></tDllPa>
|
||||
<tDlgDll></tDlgDll>
|
||||
<tDlgPa></tDlgPa>
|
||||
<tIfile>.\flexspi_nor.ini</tIfile>
|
||||
<pMon>BIN\UL2CM3.DLL</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>UL2CM3</Key>
|
||||
<Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC8000 -FD20000000 -FF0MIMXRT106x_QSPI_4KB_SEC -FL0800000 -FS060000000 -FP0($$Device:MIMXRT1061CVL5A$arm\MIMXRT106x_QSPI_4KB_SEC.FLM)</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>CMSIS_AGDI</Key>
|
||||
<Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC8000 -FD20000000 -FF0MIMXRT106x_QSPI_4KB_SEC -FL0800000 -FS060000000 -FP0($$Device:MIMXRT1061CVL5A$arm\MIMXRT106x_QSPI_4KB_SEC.FLM)</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
<DebugFlag>
|
||||
<trace>0</trace>
|
||||
<periodic>0</periodic>
|
||||
<aLwin>0</aLwin>
|
||||
<aCover>0</aCover>
|
||||
<aSer1>0</aSer1>
|
||||
<aSer2>0</aSer2>
|
||||
<aPa>0</aPa>
|
||||
<viewmode>0</viewmode>
|
||||
<vrSel>0</vrSel>
|
||||
<aSym>0</aSym>
|
||||
<aTbox>0</aTbox>
|
||||
<AscS1>0</AscS1>
|
||||
<AscS2>0</AscS2>
|
||||
<AscS3>0</AscS3>
|
||||
<aSer3>0</aSer3>
|
||||
<eProf>0</eProf>
|
||||
<aLa>0</aLa>
|
||||
<aPa1>0</aPa1>
|
||||
<AscS4>0</AscS4>
|
||||
<aSer4>0</aSer4>
|
||||
<StkLoc>0</StkLoc>
|
||||
<TrcWin>0</TrcWin>
|
||||
<newCpu>0</newCpu>
|
||||
<uProt>0</uProt>
|
||||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
<bLintAuto>0</bLintAuto>
|
||||
<bAutoGenD>0</bAutoGenD>
|
||||
<LntExFlags>0</LntExFlags>
|
||||
<pMisraName></pMisraName>
|
||||
<pszMrule></pszMrule>
|
||||
<pSingCmds></pSingCmds>
|
||||
<pMultCmds></pMultCmds>
|
||||
<pMisraNamep></pMisraNamep>
|
||||
<pszMrulep></pszMrulep>
|
||||
<pSingCmdsp></pSingCmdsp>
|
||||
<pMultCmdsp></pMultCmdsp>
|
||||
<DebugDescription>
|
||||
<Enable>1</Enable>
|
||||
<EnableFlashSeq>1</EnableFlashSeq>
|
||||
<EnableLog>0</EnableLog>
|
||||
<Protocol>2</Protocol>
|
||||
<DbgClock>10000000</DbgClock>
|
||||
</DebugDescription>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
</ProjectOpt>
|
||||
@@ -0,0 +1,392 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
|
||||
|
||||
<SchemaVersion>2.1</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Targets>
|
||||
<Target>
|
||||
<TargetName>rtthread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
|
||||
<uAC6>0</uAC6>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>MIMXRT1061CVL5A</Device>
|
||||
<Vendor>NXP</Vendor>
|
||||
<PackID>NXP.MIMXRT1061_DFP.16.0.0</PackID>
|
||||
<PackURL>https://mcuxpresso.nxp.com/cmsis_pack/repo/</PackURL>
|
||||
<Cpu>IRAM(0x20000000,0x020000) IRAM2(0x00000000,0x020000) IROM(0x00200000,0x020000) XRAM(0x20280000,0x040000) XRAM2(0x20200000,0x080000) CPUTYPE("Cortex-M7") FPU3(DFPU) CLOCK(12000000) ELITTLE</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
<StartupFile></StartupFile>
|
||||
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC8000 -FN1 -FF0MIMXRT106x_QSPI_4KB_SEC -FS060000000 -FL0800000 -FP0($$Device:MIMXRT1061CVL5A$arm\MIMXRT106x_QSPI_4KB_SEC.FLM))</FlashDriverDll>
|
||||
<DeviceId>0</DeviceId>
|
||||
<RegisterFile>$$Device:MIMXRT1061CVL5A$fsl_device_registers.h</RegisterFile>
|
||||
<MemoryEnv></MemoryEnv>
|
||||
<Cmp></Cmp>
|
||||
<Asm></Asm>
|
||||
<Linker></Linker>
|
||||
<OHString></OHString>
|
||||
<InfinionOptionDll></InfinionOptionDll>
|
||||
<SLE66CMisc></SLE66CMisc>
|
||||
<SLE66AMisc></SLE66AMisc>
|
||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||
<SFDFile>$$Device:MIMXRT1061CVL5A$MIMXRT1061.xml</SFDFile>
|
||||
<bCustSvd>0</bCustSvd>
|
||||
<UseEnv>0</UseEnv>
|
||||
<BinPath></BinPath>
|
||||
<IncludePath></IncludePath>
|
||||
<LibPath></LibPath>
|
||||
<RegisterFilePath></RegisterFilePath>
|
||||
<DBRegisterFilePath></DBRegisterFilePath>
|
||||
<TargetStatus>
|
||||
<Error>0</Error>
|
||||
<ExitCodeStop>0</ExitCodeStop>
|
||||
<ButtonStop>0</ButtonStop>
|
||||
<NotGenerated>0</NotGenerated>
|
||||
<InvalidFlash>1</InvalidFlash>
|
||||
</TargetStatus>
|
||||
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
|
||||
<OutputName>rtthread</OutputName>
|
||||
<CreateExecutable>1</CreateExecutable>
|
||||
<CreateLib>0</CreateLib>
|
||||
<CreateHexFile>0</CreateHexFile>
|
||||
<DebugInformation>1</DebugInformation>
|
||||
<BrowseInformation>1</BrowseInformation>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
<HexFormatSelection>1</HexFormatSelection>
|
||||
<Merge32K>0</Merge32K>
|
||||
<CreateBatchFile>0</CreateBatchFile>
|
||||
<BeforeCompile>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopU1X>0</nStopU1X>
|
||||
<nStopU2X>0</nStopU2X>
|
||||
</BeforeCompile>
|
||||
<BeforeMake>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopB1X>0</nStopB1X>
|
||||
<nStopB2X>0</nStopB2X>
|
||||
</BeforeMake>
|
||||
<AfterMake>
|
||||
<RunUserProg1>1</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopA1X>0</nStopA1X>
|
||||
<nStopA2X>0</nStopA2X>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
</TargetCommonOption>
|
||||
<CommonProperty>
|
||||
<UseCPPCompiler>0</UseCPPCompiler>
|
||||
<RVCTCodeConst>0</RVCTCodeConst>
|
||||
<RVCTZI>0</RVCTZI>
|
||||
<RVCTOtherData>0</RVCTOtherData>
|
||||
<ModuleSelection>0</ModuleSelection>
|
||||
<IncludeInBuild>1</IncludeInBuild>
|
||||
<AlwaysBuild>0</AlwaysBuild>
|
||||
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||
<PublicsOnly>0</PublicsOnly>
|
||||
<StopOnExitCode>3</StopOnExitCode>
|
||||
<CustomArgument></CustomArgument>
|
||||
<IncludeLibraryModules></IncludeLibraryModules>
|
||||
<ComprImg>1</ComprImg>
|
||||
</CommonProperty>
|
||||
<DllOption>
|
||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||
<SimDllArguments> -REMAP -MPU</SimDllArguments>
|
||||
<SimDlgDll>DCM.DLL</SimDlgDll>
|
||||
<SimDlgDllArguments>-pCM7</SimDlgDllArguments>
|
||||
<TargetDllName>SARMCM3.DLL</TargetDllName>
|
||||
<TargetDllArguments> -MPU</TargetDllArguments>
|
||||
<TargetDlgDll>TCM.DLL</TargetDlgDll>
|
||||
<TargetDlgDllArguments>-pCM7</TargetDlgDllArguments>
|
||||
</DllOption>
|
||||
<DebugOption>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
<UseTargetDll>1</UseTargetDll>
|
||||
<UseExternalTool>0</UseExternalTool>
|
||||
<RunIndependent>0</RunIndependent>
|
||||
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
|
||||
<Capability>1</Capability>
|
||||
<DriverSelection>4096</DriverSelection>
|
||||
</Flash1>
|
||||
<bUseTDR>1</bUseTDR>
|
||||
<Flash2>BIN\UL2CM3.DLL</Flash2>
|
||||
<Flash3></Flash3>
|
||||
<Flash4></Flash4>
|
||||
<pFcarmOut></pFcarmOut>
|
||||
<pFcarmGrp></pFcarmGrp>
|
||||
<pFcArmRoot></pFcArmRoot>
|
||||
<FcArmLst>0</FcArmLst>
|
||||
</Utilities>
|
||||
<TargetArmAds>
|
||||
<ArmAdsMisc>
|
||||
<GenerateListings>0</GenerateListings>
|
||||
<asHll>1</asHll>
|
||||
<asAsm>1</asAsm>
|
||||
<asMacX>1</asMacX>
|
||||
<asSyms>1</asSyms>
|
||||
<asFals>1</asFals>
|
||||
<asDbgD>1</asDbgD>
|
||||
<asForm>1</asForm>
|
||||
<ldLst>0</ldLst>
|
||||
<ldmm>1</ldmm>
|
||||
<ldXref>1</ldXref>
|
||||
<BigEnd>0</BigEnd>
|
||||
<AdsALst>1</AdsALst>
|
||||
<AdsACrf>1</AdsACrf>
|
||||
<AdsANop>0</AdsANop>
|
||||
<AdsANot>0</AdsANot>
|
||||
<AdsLLst>1</AdsLLst>
|
||||
<AdsLmap>1</AdsLmap>
|
||||
<AdsLcgr>1</AdsLcgr>
|
||||
<AdsLsym>1</AdsLsym>
|
||||
<AdsLszi>1</AdsLszi>
|
||||
<AdsLtoi>1</AdsLtoi>
|
||||
<AdsLsun>1</AdsLsun>
|
||||
<AdsLven>1</AdsLven>
|
||||
<AdsLsxf>1</AdsLsxf>
|
||||
<RvctClst>0</RvctClst>
|
||||
<GenPPlst>0</GenPPlst>
|
||||
<AdsCpuType>"Cortex-M7"</AdsCpuType>
|
||||
<RvctDeviceName></RvctDeviceName>
|
||||
<mOS>0</mOS>
|
||||
<uocRom>0</uocRom>
|
||||
<uocRam>0</uocRam>
|
||||
<hadIROM>1</hadIROM>
|
||||
<hadIRAM>1</hadIRAM>
|
||||
<hadXRAM>1</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>3</RvdsVP>
|
||||
<RvdsMve>0</RvdsMve>
|
||||
<RvdsCdeCp>0</RvdsCdeCp>
|
||||
<nBranchProt>0</nBranchProt>
|
||||
<hadIRAM2>1</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>0</StupSel>
|
||||
<useUlib>0</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<nSecure>0</nSecure>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>4</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
<OptFeed>0</OptFeed>
|
||||
<NoZi1>0</NoZi1>
|
||||
<NoZi2>0</NoZi2>
|
||||
<NoZi3>0</NoZi3>
|
||||
<NoZi4>0</NoZi4>
|
||||
<NoZi5>0</NoZi5>
|
||||
<Ro1Chk>0</Ro1Chk>
|
||||
<Ro2Chk>0</Ro2Chk>
|
||||
<Ro3Chk>0</Ro3Chk>
|
||||
<Ir1Chk>1</Ir1Chk>
|
||||
<Ir2Chk>0</Ir2Chk>
|
||||
<Ra1Chk>0</Ra1Chk>
|
||||
<Ra2Chk>0</Ra2Chk>
|
||||
<Ra3Chk>0</Ra3Chk>
|
||||
<Im1Chk>1</Im1Chk>
|
||||
<Im2Chk>1</Im2Chk>
|
||||
<OnChipMemories>
|
||||
<Ocm1>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm1>
|
||||
<Ocm2>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm2>
|
||||
<Ocm3>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm3>
|
||||
<Ocm4>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm4>
|
||||
<Ocm5>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm5>
|
||||
<Ocm6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm6>
|
||||
<IRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</IRAM>
|
||||
<IROM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x200000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</IROM>
|
||||
<XRAM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x20280000</StartAddress>
|
||||
<Size>0x40000</Size>
|
||||
</XRAM>
|
||||
<OCR_RVCT1>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT1>
|
||||
<OCR_RVCT2>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT2>
|
||||
<OCR_RVCT3>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT3>
|
||||
<OCR_RVCT4>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x200000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT4>
|
||||
<OCR_RVCT5>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT5>
|
||||
<OCR_RVCT6>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x20280000</StartAddress>
|
||||
<Size>0x40000</Size>
|
||||
</OCR_RVCT6>
|
||||
<OCR_RVCT7>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x20200000</StartAddress>
|
||||
<Size>0x80000</Size>
|
||||
</OCR_RVCT7>
|
||||
<OCR_RVCT8>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT8>
|
||||
<OCR_RVCT9>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT9>
|
||||
<OCR_RVCT10>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT10>
|
||||
</OnChipMemories>
|
||||
<RvctStartVector></RvctStartVector>
|
||||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>1</OneElfS>
|
||||
<Strict>0</Strict>
|
||||
<EnumInt>0</EnumInt>
|
||||
<PlainCh>0</PlainCh>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<wLevel>0</wLevel>
|
||||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<uGnu>0</uGnu>
|
||||
<useXO>0</useXO>
|
||||
<v6Lang>1</v6Lang>
|
||||
<v6LangP>1</v6LangP>
|
||||
<vShortEn>1</vShortEn>
|
||||
<vShortWch>1</vShortWch>
|
||||
<v6Lto>0</v6Lto>
|
||||
<v6WtE>0</v6WtE>
|
||||
<v6Rtti>0</v6Rtti>
|
||||
<VariousControls>
|
||||
<MiscControls>--library_interface=armcc --library_type=standardlib --diag_suppress=66,1296,186</MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Cads>
|
||||
<Aads>
|
||||
<interw>1</interw>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<thumb>0</thumb>
|
||||
<SplitLS>0</SplitLS>
|
||||
<SwStkChk>0</SwStkChk>
|
||||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<ClangAsOpt>4</ClangAsOpt>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Aads>
|
||||
<LDads>
|
||||
<umfTarg>0</umfTarg>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<noStLib>0</noStLib>
|
||||
<RepFail>1</RepFail>
|
||||
<useFile>0</useFile>
|
||||
<TextAddressRange>0x00000000</TextAddressRange>
|
||||
<DataAddressRange>0x10000000</DataAddressRange>
|
||||
<pXoBase></pXoBase>
|
||||
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
||||
<IncludeLibs></IncludeLibs>
|
||||
<IncludeLibsPath></IncludeLibsPath>
|
||||
<Misc></Misc>
|
||||
<LinkerInputFile></LinkerInputFile>
|
||||
<DisabledWarnings>6314</DisabledWarnings>
|
||||
</LDads>
|
||||
</TargetArmAds>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
</Targets>
|
||||
|
||||
<RTE>
|
||||
<apis/>
|
||||
<components/>
|
||||
<files/>
|
||||
</RTE>
|
||||
|
||||
</Project>
|
||||
@@ -0,0 +1,121 @@
|
||||
/* ----------------------------------------------------------------------
|
||||
* Project: CMSIS DSP Library
|
||||
* Title: arm_common_tables.h
|
||||
* Description: Extern declaration for common tables
|
||||
*
|
||||
* $Date: 27. January 2017
|
||||
* $Revision: V.1.5.1
|
||||
*
|
||||
* Target Processor: Cortex-M cores
|
||||
* -------------------------------------------------------------------- */
|
||||
/*
|
||||
* Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _ARM_COMMON_TABLES_H
|
||||
#define _ARM_COMMON_TABLES_H
|
||||
|
||||
#include "arm_math.h"
|
||||
|
||||
extern const uint16_t armBitRevTable[1024];
|
||||
extern const q15_t armRecipTableQ15[64];
|
||||
extern const q31_t armRecipTableQ31[64];
|
||||
extern const float32_t twiddleCoef_16[32];
|
||||
extern const float32_t twiddleCoef_32[64];
|
||||
extern const float32_t twiddleCoef_64[128];
|
||||
extern const float32_t twiddleCoef_128[256];
|
||||
extern const float32_t twiddleCoef_256[512];
|
||||
extern const float32_t twiddleCoef_512[1024];
|
||||
extern const float32_t twiddleCoef_1024[2048];
|
||||
extern const float32_t twiddleCoef_2048[4096];
|
||||
extern const float32_t twiddleCoef_4096[8192];
|
||||
#define twiddleCoef twiddleCoef_4096
|
||||
extern const q31_t twiddleCoef_16_q31[24];
|
||||
extern const q31_t twiddleCoef_32_q31[48];
|
||||
extern const q31_t twiddleCoef_64_q31[96];
|
||||
extern const q31_t twiddleCoef_128_q31[192];
|
||||
extern const q31_t twiddleCoef_256_q31[384];
|
||||
extern const q31_t twiddleCoef_512_q31[768];
|
||||
extern const q31_t twiddleCoef_1024_q31[1536];
|
||||
extern const q31_t twiddleCoef_2048_q31[3072];
|
||||
extern const q31_t twiddleCoef_4096_q31[6144];
|
||||
extern const q15_t twiddleCoef_16_q15[24];
|
||||
extern const q15_t twiddleCoef_32_q15[48];
|
||||
extern const q15_t twiddleCoef_64_q15[96];
|
||||
extern const q15_t twiddleCoef_128_q15[192];
|
||||
extern const q15_t twiddleCoef_256_q15[384];
|
||||
extern const q15_t twiddleCoef_512_q15[768];
|
||||
extern const q15_t twiddleCoef_1024_q15[1536];
|
||||
extern const q15_t twiddleCoef_2048_q15[3072];
|
||||
extern const q15_t twiddleCoef_4096_q15[6144];
|
||||
extern const float32_t twiddleCoef_rfft_32[32];
|
||||
extern const float32_t twiddleCoef_rfft_64[64];
|
||||
extern const float32_t twiddleCoef_rfft_128[128];
|
||||
extern const float32_t twiddleCoef_rfft_256[256];
|
||||
extern const float32_t twiddleCoef_rfft_512[512];
|
||||
extern const float32_t twiddleCoef_rfft_1024[1024];
|
||||
extern const float32_t twiddleCoef_rfft_2048[2048];
|
||||
extern const float32_t twiddleCoef_rfft_4096[4096];
|
||||
|
||||
/* floating-point bit reversal tables */
|
||||
#define ARMBITREVINDEXTABLE_16_TABLE_LENGTH ((uint16_t)20)
|
||||
#define ARMBITREVINDEXTABLE_32_TABLE_LENGTH ((uint16_t)48)
|
||||
#define ARMBITREVINDEXTABLE_64_TABLE_LENGTH ((uint16_t)56)
|
||||
#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208)
|
||||
#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440)
|
||||
#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448)
|
||||
#define ARMBITREVINDEXTABLE_1024_TABLE_LENGTH ((uint16_t)1800)
|
||||
#define ARMBITREVINDEXTABLE_2048_TABLE_LENGTH ((uint16_t)3808)
|
||||
#define ARMBITREVINDEXTABLE_4096_TABLE_LENGTH ((uint16_t)4032)
|
||||
|
||||
extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE_16_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE_32_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE_64_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE_1024_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE_2048_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE_4096_TABLE_LENGTH];
|
||||
|
||||
/* fixed-point bit reversal tables */
|
||||
#define ARMBITREVINDEXTABLE_FIXED_16_TABLE_LENGTH ((uint16_t)12)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_32_TABLE_LENGTH ((uint16_t)24)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_64_TABLE_LENGTH ((uint16_t)56)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_128_TABLE_LENGTH ((uint16_t)112)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_256_TABLE_LENGTH ((uint16_t)240)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_512_TABLE_LENGTH ((uint16_t)480)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
|
||||
#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
|
||||
|
||||
extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED_16_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED_32_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED_64_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED_128_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED_256_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED_512_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
|
||||
extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
|
||||
|
||||
/* Tables for Fast Math Sine and Cosine */
|
||||
extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
|
||||
extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
|
||||
extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
|
||||
|
||||
#endif /* ARM_COMMON_TABLES_H */
|
||||
@@ -0,0 +1,66 @@
|
||||
/* ----------------------------------------------------------------------
|
||||
* Project: CMSIS DSP Library
|
||||
* Title: arm_const_structs.h
|
||||
* Description: Constant structs that are initialized for user convenience.
|
||||
* For example, some can be given as arguments to the arm_cfft_f32() function.
|
||||
*
|
||||
* $Date: 27. January 2017
|
||||
* $Revision: V.1.5.1
|
||||
*
|
||||
* Target Processor: Cortex-M cores
|
||||
* -------------------------------------------------------------------- */
|
||||
/*
|
||||
* Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _ARM_CONST_STRUCTS_H
|
||||
#define _ARM_CONST_STRUCTS_H
|
||||
|
||||
#include "arm_math.h"
|
||||
#include "arm_common_tables.h"
|
||||
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
|
||||
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
|
||||
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
|
||||
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
|
||||
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
|
||||
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
|
||||
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,266 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_compiler.h
|
||||
* @brief CMSIS compiler generic header file
|
||||
* @version V5.0.4
|
||||
* @date 10. January 2018
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef __CMSIS_COMPILER_H
|
||||
#define __CMSIS_COMPILER_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/*
|
||||
* Arm Compiler 4/5
|
||||
*/
|
||||
#if defined ( __CC_ARM )
|
||||
#include "cmsis_armcc.h"
|
||||
|
||||
|
||||
/*
|
||||
* Arm Compiler 6 (armclang)
|
||||
*/
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
|
||||
#include "cmsis_armclang.h"
|
||||
|
||||
|
||||
/*
|
||||
* GNU Compiler
|
||||
*/
|
||||
#elif defined ( __GNUC__ )
|
||||
#include "cmsis_gcc.h"
|
||||
|
||||
|
||||
/*
|
||||
* IAR Compiler
|
||||
*/
|
||||
#elif defined ( __ICCARM__ )
|
||||
#include <cmsis_iccarm.h>
|
||||
|
||||
|
||||
/*
|
||||
* TI Arm Compiler
|
||||
*/
|
||||
#elif defined ( __TI_ARM__ )
|
||||
#include <cmsis_ccs.h>
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __attribute__((noreturn))
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT struct __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION union __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
struct __attribute__((packed)) T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __attribute__((aligned(x)))
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* TASKING Compiler
|
||||
*/
|
||||
#elif defined ( __TASKING__ )
|
||||
/*
|
||||
* The CMSIS functions have been implemented as intrinsics in the compiler.
|
||||
* Please use "carm -?i" to get an up to date list of all intrinsics,
|
||||
* Including the CMSIS ones.
|
||||
*/
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __attribute__((noreturn))
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __packed__
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT struct __packed__
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION union __packed__
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
struct __packed__ T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __align(x)
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* COSMIC Compiler
|
||||
*/
|
||||
#elif defined ( __CSMC__ )
|
||||
#include <cmsis_csm.h>
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM _asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
// NO RETURN is automatically detected hence no warning here
|
||||
#define __NO_RETURN
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#warning No compiler specific solution for __USED. __USED is ignored.
|
||||
#define __USED
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __weak
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED @packed
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT @packed struct
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION @packed union
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
@packed struct T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
|
||||
#define __ALIGNED(x)
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
|
||||
|
||||
#else
|
||||
#error Unknown compiler.
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __CMSIS_COMPILER_H */
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,39 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_version.h
|
||||
* @brief CMSIS Core(M) Version definitions
|
||||
* @version V5.0.2
|
||||
* @date 19. April 2017
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2017 ARM Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CMSIS_VERSION_H
|
||||
#define __CMSIS_VERSION_H
|
||||
|
||||
/* CMSIS Version definitions */
|
||||
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
|
||||
#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */
|
||||
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user