Tom van Dijk
ff8c58a190
* First attempt at bebop fisheye camera * Try setting raw camera output size during initialization, does not work SetImageSize() is ignored and SetEnvTextureSize() causes an exception. Currently the camera output is too large for real-time operation. * FIX apply MT9F002_OUTPUT_SCALER to gazebo front camera * Add MT9F002 camera cropping to fdm_gazebo * Apply MT9F002_TARGET_FPS to bebop front cam in gazebo * Set up bottom camera for bebop model * Minor fixes and cleanup * Fix MT9F002 partially applied to all cameras * Remove sensors_params_bebop, introduce NPS_SIMULATE_MT9F002 Reduces duplicate code for sensor parameters, and follows the same pattern as NPS_SIMULATE_LASER_RANGE_ARRAY. Also does not require the sensor params to be changed in every bebop airframe.
MAIN README
Paparazzi UAS
Paparazzi is a free open source software package for Unmanned (Air) Vehicle Systems. For many years, the system has been used successfuly by hobbyists, universities and companies all over the world, on vehicles of various sizes (11.9g to 25kg). Paparazzi supports fixed wing, rotorcraft, hybrids, flapping vehicles and it is even possible to use it for boats and surface vehicles.
Up to date information is available on the wiki http://wiki.paparazziuav.org
To get in touch, subscribe to the mailing list [paparazzi-devel@nongnu.org] (http://savannah.nongnu.org/mail/?group=paparazzi), the IRC channel (freenode, #paparazzi) and Gitter (https://gitter.im/paparazzi/discuss).
Required software
Instructions for installation can be found on the wiki (http://wiki.paparazziuav.org/wiki/Installation).
For Ubuntu users, required packages are available in the [paparazzi-uav PPA] (https://launchpad.net/~paparazzi-uav/+archive/ppa), Debian users can use the [OpenSUSE Build Service repository] (http://download.opensuse.org/repositories/home:/flixr:/paparazzi-uav/Debian_7.0/)
Debian/Ubuntu packages:
- paparazzi-dev is the meta-package on which the Paparazzi software depends to compile and run the ground segment and simulator.
- paparazzi-jsbsim is needed for using JSBSim as flight dynamics model for the simulator.
Recommended cross compiling toolchain: https://launchpad.net/gcc-arm-embedded
Directories quick and dirty description:
conf: the configuration directory (airframe, radio, ... descriptions).
data: where to put read-only data (e.g. maps, terrain elevation files, icons)
doc: documentation (diagrams, manual source files, ...)
sw: software (onboard, ground station, simulation, ...)
var: products of compilation, cache for the map tiles, ...
Compilation and demo simulation
-
type "make" in the top directory to compile all the libraries and tools.
-
"./paparazzi" to run the Paparazzi Center
-
Select the "Microjet" aircraft in the upper-left A/C combo box. Select "sim" from upper-middle "target" combo box. Click "Build". When the compilation is finished, select "Simulation" from the upper-right session combo box and click "Execute".
-
In the GCS, wait about 10s for the aircraft to be in the "Holding point" navigation block. Switch to the "Takeoff" block (lower-left blue airway button in the strip). Takeoff with the green launch button.
Uploading the embedded software
-
Power the flight controller board while it is connected to the PC with the USB cable.
-
From the Paparazzi center, select the "ap" target, and click "Upload".
Flight
- From the Paparazzi Center, select the flight session and ... do the same as in simulation !