d5cfaa5c31
Refreshed from master
2017-05-30 08:22:03 +02:00
2a1eea87ac
Fixedwing for Pixracer
2017-05-30 08:12:20 +02:00
66fd00255b
Patched AC and Fligtplans to be compatible with latest XML syntax
2017-05-30 07:50:54 +02:00
c2e44e80cc
PPRZ_MODE* to currrent syntax AP_MODE*
2017-05-29 14:29:43 +02:00
950da910f0
PPRZ_MODE* to currrent syntax AP_MODE*
2017-05-29 14:28:24 +02:00
5715df6c53
PPRZ_MODE* to currrent syntax AP_MODE*
2017-05-29 14:27:02 +02:00
5108b122e6
linux time usec from clock ( #2067 )
2017-05-24 18:56:58 +02:00
dfba3220f5
Succesfully tested Disco at v1.3 ( #2066 )
2017-05-23 10:08:57 +02:00
e650788689
Added test for aggieair config ( #2061 )
...
* Added test for aggieair config
2017-05-17 23:52:32 +02:00
a50be94dbd
[settings] change settings notebook to scrollable for many tabs on small screen ( #2065 )
2017-05-17 20:22:33 +02:00
124fa3267d
Update opticflow_calculator.c
...
This fixes that division by previous_frame_offset is now no longer ignored. Now if a user applies a longer horizon, the value is calculated as it should be.
2017-05-16 10:54:27 +02:00
d683d4b52a
OpenOCD moved the location of scripts. This patch fixes the defaults. ( #2059 )
...
needs openocd 0.6 or higher, which should be the case on all our supported ubuntu versions
2017-05-13 21:19:54 +02:00
f94fcec20c
Update bebop.py
...
Another parrot firmware fly tested v4.0.5 as well on Bebop1 as Bebop2. Note that camera issue not yet fixed in PPRZ.
2017-05-11 09:36:41 +02:00
f1f43d47f9
better initialization guidance_indi ( #2063 )
2017-05-10 21:46:50 +02:00
4fa4a6effd
fix delft_basic flight plan exceptions
2017-05-10 10:53:52 +02:00
e30a03cc00
Copilot fixes
2017-05-06 14:47:51 -07:00
005b5cbc14
Updated aggieair conf
2017-05-06 13:37:14 -07:00
888289abf4
Update pprzlink
2017-05-06 13:34:30 -07:00
626448c713
Fixed copilot module ( #2060 )
...
* Fixed copilot module to work both with rotorcraft and fixedwing firmwares
* Minor fixes
* Fixed compilation test
2017-05-06 13:27:07 -07:00
86baffe98a
guidance_h heading setpoint in float ( #2051 )
2017-05-06 13:25:35 -07:00
0a65e14903
[autopilot] compiling generated AP for fixedwing ( #2055 )
...
* [autopilot] compiling generated AP for fixedwing
* update some old variable names for autopilot mode
* prevent oscillation on the ground with real aircraft
* add guidance loop to 'new' control
all this guidance code should really be better factorized
* fix rotorcraft autopilot for new API
* read guidance RC if needed
* use generated autopilot as soon as an autopilot file is defined
* autopilot node at airframe, firmware or target level
The autopilot can be specific to one of the firmware, or one of the
target.
At the moment, it will fail at runtime if more than one autopilot in the
same airframe since server don't know which target is in use.
2017-05-06 13:24:40 -07:00
de58bd52ac
Added AggieAir airframes
2017-05-06 09:59:36 -07:00
99de1698d5
[AGGIEAIR] Updated control panel session
2017-05-04 10:13:31 -07:00
677d0af0bd
Fix px4 fbw flash problem, related to #2040 ( #2057 )
2017-04-25 18:24:37 -07:00
2f020745f9
[chimera] change dma streams to use i2c2 ( #2056 )
2017-04-25 13:15:03 +02:00
d9adcccc8e
[python] guided_mode_example.py: get aircraft id if not give on commandline
...
sorry, terribly crude.... but should get the basic point across until someone does it nicely.
2017-04-24 22:45:57 +02:00
095eca2c2d
Merge pull request #2048 from ETitus/EdgeFlow_fixes
...
Edge flow fixes. Thx to all involved for all the hard work done and testing validation . There will be some others working with the OF fixed solution, so more validation tests by others soon in the renewed Optitrack. Issues can be filed if still something is amiss.
2017-04-24 14:43:33 +02:00
c2e314c0f1
Updated vectornav status message so it displays the right rate invariant on the frequency the message is sent
2017-04-19 18:22:05 -07:00
ca68570d03
Mission Computer and payload computer support ( #2053 )
...
* Copilot module
* Added mission computer status
* modules_parse_datalink() now accepts arguments
* Update pprzlink
* Update cartography module to comply with the extended CAMERA_SNAPSHOT message
2017-04-19 18:11:54 +02:00
2ccdc51f51
Added an INDI conf to test the pullrequest
2017-04-18 17:37:47 +02:00
8f1e082cfe
[HITL] Fixed fixedwing simulation - runs now nicely with Minion Lia as an example ( #2054 )
2017-04-15 23:16:44 +02:00
3dcfdc9ac7
[fix] Correct dimensions g1g2 matrix
2017-04-14 18:02:22 +02:00
59f03f90f7
Update bebop.py
...
Tested on Bebop and Bebop 2. v4.0.4 Min version set to 3.3 no motor swap issue "fix" unwanted behaviour.
2017-04-05 13:08:39 +02:00
2ac81ac855
Proposed speedup edits as described in pull request comments
2017-04-03 11:47:11 +02:00
a14f4e75a7
ADC CHANNEL 1 value corrected to in3 ( #2049 )
2017-03-31 14:34:18 +02:00
ab8cf6f607
added a proper resolution parameter in EF rather than using the subpixel factor from LK
2017-03-30 23:52:49 +02:00
d3d805d00a
1)in vision/image.c there was an incorrect bound that caused the code to read a value outside of the buffer. 2)in vision/lucas_kanade.c there was a rounding error that caused bordervalues to still be accepted. Also when the selection of new point could be messed up by an overflow where the unsigned point - the signed flow could overflow, the result wasnt caught by the ignore check.
2017-03-28 11:56:25 +02:00
b1102eb04e
[aggie_air_control_panel] Added NPS session with FlightGear
2017-03-27 18:07:38 -07:00
e4773906de
[nav_launcher] Minor functionality fix so it works in simulation
2017-03-27 17:58:05 -07:00
6c8fb1fbf9
moved the opticflow_calc_init call to opticflow_module.c and moved the LK related parts to the LK function
2017-03-27 12:45:19 +02:00
b9e71e9fa4
Small update to the circular formation script ( #2046 )
...
* sigmas are in degrees now. We print all the errors correctly for logging purposes. The conversion to floats from the gvf msg has been changed since it complained for some machines.
* example added
* do not forcing a particular path
* cleaner demo flight plan. Now it also includes the gvf module
* correct usage msg
* [GVF] Example for the wiki and README
2017-03-24 13:19:45 +01:00
b7e0f2e9bf
corrected printing of config var
2017-03-23 16:07:09 +01:00
14d5bfe24b
In void calc_edgeflow_tot, change flow_x into div_x as it is the divergence being set.
2017-03-23 16:04:01 +01:00
2195de3af8
In void calc_edgeflow_tot, prevent segfault due to memory leak in line 445-446 by freeing the malloc'd variables properly
2017-03-23 15:58:27 +01:00
db6548ed67
in void line_fit, fixed sumx2 by correctly removing 1*1 +2*2 etc until and including (border-1)*(border-1)
2017-03-23 15:53:50 +01:00
a75b2e82f0
in void calculate_edge_histogram, 1)IMPORTANT: corrected the index used for img_buf, the +1 caused a out of array memory address to be looked up. Also it caused wrong calculations to take place arround the borders of the image 2)removed comments that were from an old version
2017-03-23 15:28:38 +01:00
aab67c06f3
in void calculate_edge_displacement, 1)corrected in/out comment 2)removed a pair of redundant {}'s
2017-03-23 15:22:03 +01:00
cdf9b2247e
Drawing circles in the GCS if the user is employing the Guidance Vector Field ( #2045 )
...
* If the ellipse is a circle, then we set PPZ Horizontal Mode to CIRCLE
* at least one byte has to be sent
* for now, if not in a CIRCLE, then a WAYPOINT, so the GCS will not draw anything
2017-03-22 17:22:19 +01:00
0a061c57fd
[MAG_CALIB_UKF] Online magnetomer calibration using unscented Kalman filter ( #2043 )
2017-03-22 09:37:23 +01:00
42c0cd27d1
[extra_dl] Extend module functionality ( #2042 )
...
use dedicated buffer
2017-03-21 11:08:15 +01:00
Open UAS
OpenUAS
Ewoud Smeur
kevindehecker
Michal Podhradsky
Michael Sierra
Piotr Esden-Tempski
Gautier Hattenberger
Felix Ruess
Titus
Murat Bronz
Hector Garcia de Marina
Wilco
Michal Podhradsky