a5ed01bab4
[build] use 'default' instead of 'value' to pass default values
2016-02-12 00:03:18 +01:00
904507a4e6
[build] add case modifier to modules' makefile
...
- this allow to use lower and upper version of a makefile variable.
- can also be use to provide default value to some variables.
2016-02-10 18:05:43 +01:00
74ebb5bad9
[modules] use configure for I2C_DEV
2015-11-16 17:39:53 +01:00
c81d770fd9
[modules] baro_ets: BARO_ETS_SCALE
...
Conversion of ADC to Pascal should be roughly correct now, not tested though.
2013-10-07 19:29:57 +02:00
bfe0072f99
[modules] baro modules for real sensors only for ap target, not sim
2013-10-07 18:44:49 +02:00
0d75609c20
[modules] ets baro/airspeed: cleanup and default delay of 0.2s
...
- airspeed_ets: use AIRSPEED_ETS_SYNC_SEND instead of SENSOR_SYNC_SEND
- baro_ets: use BARO_ETS_SYNC_SEND instead of BARO_ETS_TELEMETRY
2013-07-16 23:34:14 +02:00
1c590fbb34
[modules] baro ets start delay
2013-06-08 08:23:01 +02:00
e04623c872
[doc] some module description cleanups
2012-12-29 23:12:24 +01:00
141ba9e31c
BARO_ETS_SCALE from airframe.xml
2012-10-24 22:32:33 +02:00
bcaba7c720
[modules documentation] Add a doc node to module
...
modules developpers can provide
- a description of the module
- a list of the configuration variables and flags (configure and define)
- a list of sections to add to the airframe file
2012-04-24 09:29:12 +02:00
6021335e70
update some comments in modules after parameter name unification
2010-12-24 00:11:54 +01:00
e67bfff08d
add event makros for ets sensors again to prevent unnecessary function calls
2010-11-01 20:53:42 +00:00
99fcf70ecf
make i2c device configurable through parameter for ets modules
2010-10-26 11:21:33 +00:00
bd0897b4b3
remove baro ets event makro and move transaction status check into event function
2010-10-26 11:21:20 +00:00
681d3148ed
airspeed and baro modules for Eagle Tree System
2010-10-19 12:55:31 +00:00
Gautier Hattenberger
Felix Ruess
Tobias Muench