nuttx/drivers/sensors/wtgahrs2.c: In function ‘wtgahrs2_initialize’:
nuttx/drivers/sensors/wtgahrs2.c:545:22: warning: ‘%lx’ directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Wformat-truncation=]
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~
nuttx/drivers/sensors/wtgahrs2.c:545:25: note: format string is defined here
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
nuttx/drivers/sensors/wtgahrs2.c:545:22: note: directive argument in the range [1, 18446744073709551615]
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~
nuttx/drivers/sensors/wtgahrs2.c:545:3: note: ‘snprintf’ output between 4 and 19 bytes into a destination of size 16
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
According to the ARMv7a/r/m and ARMv8m architecture manuals
The allowed values are
0 Data or unified cache.
1 Instruction cache.
"One CCSIDR is implemented for each cache that can be accessed by the processor. CSSELR selects which Cache Size ID Register is accessible, see c0, Cache Size Selection Register (CSSELR)."
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
you can debug nuttx through any transport layer (serial port, network etc.),
currently supports the following functions:
1. Read and write registers
2. Read and write memory
3. Switch thread and read stack information
Future support plans:
1. Support breakpoint, watch point (requires architecture support).
related information:
https://sourceware.org/gdb/onlinedocs/gdb/Remote-Protocol.html
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
3 wire interface for ST7789 LCD controller does not use CMD/DATA pin to
specify whether data or command is send but uses 9th bit of SPI transfer.
This commit adds support for 3 wire interface to ST7789 controller.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
use workqueue for rpmsgdev poll notify to prevent
calling rpmsgdev_poll_cb in interrupt context which
will try to hold mutex in rpmsg_send
Signed-off-by: liaoao <liaoao@xiaomi.com>
libs/libc/stdio/lib_libgetstreams.c: C source, UTF-8 Unicode text
->
libs/libc/stdio/lib_libgetstreams.c: C source, ASCII text
Signed-off-by: chao an <anchao@xiaomi.com>
Remove TABs
Fix indentation
Fix Multi-line comments
Fix Comments to the Right of Statements.
Fix nuttx coding style
Fix Comments to the Right of Statements.
In the current implementation of other architectures, it is not really implemented to preserve the context, so it is emulated from other architectures to clear the context.
If this behavior is not implemented, it will cause the xtensa architecture processor to loop assert in the active assert case
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Xiang Xiao
chao an
chenrun1
anjiahao
raiden00pl
Michal Lenc
liaoao
simbit18
wangyingdong
yintao
yinshengkai
zhangyuan21
guoshichao
Neale Ferguson