Mirrors_Framework/nuttx
1
0
Fork 0
mirror of https://github.com/apache/nuttx.git synced 2026-05-09 23:12:17 +08:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

ci: split xtensa jobs into three separate jobs (instead of two)

Browse Source 
This is necessary because new defconfig were recently added to
Xtensa-based Espressif SoCs and the build job may exceed 2 hours.
In order to avoid increasing job timeout, a specific job for each
supported SoC (ESP32, ESP32-S2 and ESP32-S3) was created instead.

Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit is contained in:
Tiago Medicci Serrano
2026-03-27 09:42:08 -03:00
committed by Xiang Xiao
parent c17e16eaed
commit 9028fe72c7
1 changed files with 6 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files
boards/xtensa/esp32/heltec_wifi_lora32/src/esp32_sx127x.c
+6 -6
View File
@@ -90,13 +90,13 @@ static int sx127x_irq0_attach(xcpt_t isr, void *arg)
/* Make sure the interrupt is disabled */
esp32_gpioirqdisable(irq);
esp_gpioirqdisable(irq);
wlinfo("Attach DIO0 IRQ\n");
/* Attach to IRQ on pin connected to DIO0 */
ret = irq_attach(irq, isr, arg);
ret = esp_gpio_irq(GPIO_SX127X_DIO0, isr, arg);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: gpint_attach() failed: %d\n", ret);
@@ -105,7 +105,7 @@ static int sx127x_irq0_attach(xcpt_t isr, void *arg)
/* IRQ on rising edge */
esp32_gpioirqenable(irq, RISING);
esp_gpioirqenable(irq);
return OK;
}
@@ -125,7 +125,7 @@ static void sx127x_chip_reset(void)
/* Set pin to zero */
esp32_gpiowrite(GPIO_SX127X_RESET, 0);
esp_gpiowrite(GPIO_SX127X_RESET, 0);
/* Wait 1 ms */
@@ -133,7 +133,7 @@ static void sx127x_chip_reset(void)
/* Set pin to high */
esp32_gpiowrite(GPIO_SX127X_RESET, 1);
esp_gpiowrite(GPIO_SX127X_RESET, 1);
/* Wait 10 ms */
@@ -203,7 +203,7 @@ int esp32_lpwaninitialize(void)
/* Setup DIO0 */
esp_configgpio(GPIO_SX127X_DIO0, INPUT_FUNCTION_3 | PULLDOWN);
esp_configgpio(GPIO_SX127X_DIO0, INPUT_FUNCTION_3 | PULLDOWN | RISING);
/* Init SPI bus */