mirror of
https://github.com/apache/nuttx.git
synced 2026-05-24 07:46:16 +08:00
Basic board support for the ViewTool STM32F103/F107 board
This commit is contained in:
Gregory Nutt
@@ -6132,3 +6132,8 @@
|
||||
driver by calling unregister_blockdriver(). But (5)
|
||||
unregister_blockdriver() also takes the inode semaphore causing a
|
||||
deadlock if the inode semaphore is not re-entry. (2013-11-28).
|
||||
* configs/viewtool-stm32f107: Add board support for the ViewTool
|
||||
STM32F103/F107 board with the STM32F107VCT6 installed. Initial
|
||||
check-in is the unverfied board-support framework only
|
||||
(2013-11-30).
|
||||
|
||||
|
||||
@@ -202,6 +202,8 @@
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/ubw32/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- us7032evb1/
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/us7032evb1/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- viewtool-stm32f107/
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/viewtool-stm32f107/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- vsn/
|
||||
| | | |- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/vsn/src/README.txt">src/README.txt</a>
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/vsn/README.txt"><b><i>README.txt</i></b></a>
|
||||
|
||||
@@ -1130,6 +1130,8 @@ nuttx
|
||||
| | `- README.txt
|
||||
| |- us7032evb1/
|
||||
| | `- README.txt
|
||||
| |- viewtool-stm32f107/
|
||||
| | `- README.txt
|
||||
| |- vsn/
|
||||
| | |- src/README.txt
|
||||
| | `- README.txt
|
||||
|
||||
@@ -724,6 +724,16 @@ config ARCH_BOARD_US7032EVB1
|
||||
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
|
||||
STATUS: Work has just began on this port.
|
||||
|
||||
config ARCH_BOARD_VIEWTOOL_STM32F107
|
||||
bool "ViewTool STM32F103/F107 with STM32F107"
|
||||
depends on ARCH_CHIP_STM32F107VC
|
||||
select ARCH_HAVE_LEDS
|
||||
select ARCH_HAVE_BUTTONS
|
||||
---help---
|
||||
This port uses the ViewTool STM32F103/F107 V1.2 board. This
|
||||
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
|
||||
See http://www.viewtool.com/ for further information.
|
||||
|
||||
config ARCH_BOARD_VSN
|
||||
bool "SOTEL NetClamps VSN sensor network platform"
|
||||
depends on ARCH_CHIP_STM32F103RET6
|
||||
@@ -891,6 +901,7 @@ config ARCH_BOARD
|
||||
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
|
||||
default "ubw32" if ARCH_BOARD_UBW32
|
||||
default "us7032evb1" if ARCH_BOARD_US7032EVB1
|
||||
default "viewtool-stm32f107" if ARCH_BOARD_VIEWTOOL_STM32F107
|
||||
default "vsn" if ARCH_BOARD_VSN
|
||||
default "xtrs" if ARCH_BOARD_XTRS
|
||||
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG
|
||||
@@ -1167,6 +1178,9 @@ endif
|
||||
if ARCH_BOARD_US7032EVB1
|
||||
source "configs/us7032evb1/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_VIEWTOOL_STM32F107
|
||||
source "configs/viewtool-stm32f107/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_VSN
|
||||
source "configs/vsn/Kconfig"
|
||||
endif
|
||||
|
||||
@@ -2070,6 +2070,11 @@ configs/us7032evb1
|
||||
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
|
||||
STATUS: Work has just began on this port.
|
||||
|
||||
configs/viewtool-stm32f107
|
||||
NuttX configurations for the ViewTool STM32F103/F107 V1.2 board. This
|
||||
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
|
||||
See http://www.viewtool.com/ for further information.
|
||||
|
||||
configs/vsn
|
||||
ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the
|
||||
STMicro STM32F103RET6. Contributed by Uros Platise. See
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
|
||||
if ARCH_BOARD_VIEWTOOLS_STM32F107
|
||||
endif
|
||||
@@ -0,0 +1,53 @@
|
||||
README
|
||||
======
|
||||
|
||||
This README discusses issues unique to NuttX configurations for the
|
||||
ViewTool STM32F103/F107 V1.2 board. This board may be fitted with either
|
||||
|
||||
- STM32F107VCT6, or
|
||||
- STM32F103VCT6
|
||||
|
||||
The board is vary module with connectors for a variety of peripherals.
|
||||
Features on the base board include:
|
||||
|
||||
- User and Wake-Up Keys
|
||||
- LEDs
|
||||
|
||||
http://www.viewtool.com/ for further information.
|
||||
|
||||
User and Wake-Up keys
|
||||
=====================
|
||||
|
||||
All pulled high and will be sensed low when depressed.
|
||||
|
||||
SW2 PC11 Needs J42 closed
|
||||
SW3 PC12 Needs J43 closed
|
||||
SW4 PA0 Needs J44 closed
|
||||
|
||||
LEDs
|
||||
====
|
||||
|
||||
All pulled high and can be illuminated by driving the output to low
|
||||
|
||||
LED1 PA6
|
||||
LED2 PA7
|
||||
LED3 PB12
|
||||
LED4 PB13
|
||||
|
||||
Serial Console
|
||||
==============
|
||||
|
||||
The boards come with a PL-2303 based USB-to-serial board. Also available
|
||||
as an option is an RS-232 board. Both have the same pin out on a 6-pin
|
||||
connector that mates with the upper row of J5.
|
||||
|
||||
PIN MODULE BOARD J5
|
||||
--- ------ ---------------------------
|
||||
1 5V 1 POWER Power jumper
|
||||
2 GND 3 GND Ground
|
||||
3 TXD 5 RXD1 PA10 USART1_RXD
|
||||
4 RXD 7 TXD1 PA9 USART1_TXD
|
||||
5 RTS? 9 CTS? PA12 USART1_RTS
|
||||
6 CTS? 11 RTS? PA11 USART1_CTS
|
||||
|
||||
Note: This requires USART1 pin remapping
|
||||
@@ -0,0 +1,155 @@
|
||||
/************************************************************************************
|
||||
* configs/viewtool-stm32f107/include/board.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_VIEWTOOLS_STM32F107_INCLUDE_BOARD_H
|
||||
#define __CONFIGS_VIEWTOOLS_STM32F107_INCLUDE_BOARD_H 1
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
#include "stm32_rcc.h"
|
||||
#include "stm32_sdio.h"
|
||||
#include "stm32.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
|
||||
/* HSI - 8 MHz RC factory-trimmed
|
||||
* LSI - 40 KHz RC (30-60KHz, uncalibrated)
|
||||
* HSE - On-board crystal frequency is 25MHz
|
||||
* LSE - 32.768 kHz
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 25000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 8000000ul
|
||||
#define STM32_LSI_FREQUENCY 40000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
#define STM32_LSE_FREQUENCY 32768
|
||||
|
||||
/* PLL ouput is 72MHz */
|
||||
|
||||
#define STM32_PLL_PREDIV2 RCC_CFGR2_PREDIV2d5 /* 25MHz / 5 => 5MHz */
|
||||
#define STM32_PLL_PLL2MUL RCC_CFGR2_PLL2MULx8 /* 5MHz * 8 => 40MHz */
|
||||
#define STM32_PLL_PREDIV1 RCC_CFGR2_PREDIV1d5 /* 40MHz / 5 => 8MHz */
|
||||
#define STM32_PLL_PLLMUL RCC_CFGR_PLLMUL_CLKx9 /* 8MHz * 9 => 72Mhz */
|
||||
#define STM32_PLL_FREQUENCY (72000000)
|
||||
|
||||
/* SYCLLK and HCLK are the PLL frequency */
|
||||
|
||||
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
||||
#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK (72MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
||||
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
||||
#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 2-7, 12-14 */
|
||||
|
||||
/* APB2 timers 1 and 8 will receive PCLK2. */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* APB1 timers 2-4 will be twice PCLK1 (I presume the remaining will receive PCLK1) */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* MCO output driven by PLL3. From above, we already have PLL3 input frequency as:
|
||||
*
|
||||
* STM32_PLL_PREDIV2 = 5, 25MHz / 5 => 5MHz
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_MII_MCO) || defined(CONFIG_STM32_RMII_MCO)
|
||||
# define BOARD_CFGR_MCO_SOURCE RCC_CFGR_PLL3CLK /* Source: PLL3 */
|
||||
# define STM32_PLL_PLL3MUL RCC_CFGR2_PLL3MULx10 /* MCO 5MHz * 10 = 50MHz */
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void stm32_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_VIEWTOOLS_STM32F107_INCLUDE_BOARD_H */
|
||||
@@ -0,0 +1,115 @@
|
||||
############################################################################
|
||||
# configs/viewtool-stm32f107/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(CONFIG_STM32_DFU),y)
|
||||
LDSCRIPT = ld.script.dfu
|
||||
else
|
||||
LDSCRIPT = ld.script
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Executable
+75
@@ -0,0 +1,75 @@
|
||||
#!/bin/bash
|
||||
# configs/viewtool-stm32f107/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -0,0 +1,112 @@
|
||||
/****************************************************************************
|
||||
* configs/viewtool-stm32f107/scripts/ld.script
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
/* The STM32F107VC has 64Kb of SRAM beginning at the following address */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,112 @@
|
||||
/****************************************************************************
|
||||
* configs/viewtool-stm32f107/scripts/ld.script.dfu
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* Don't know if this is correct. Just 256K-48K (not testet) */
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08003000, LENGTH = 208K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,2 @@
|
||||
/.depend
|
||||
/Make.dep
|
||||
@@ -0,0 +1,88 @@
|
||||
############################################################################
|
||||
# configs/viewtool-stm32f107/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = stm32_boot.c stm32_spi.c
|
||||
|
||||
ifeq ($(CONFIG_CAN),y)
|
||||
CSRCS += stm32_can.c
|
||||
endif
|
||||
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
-include Make.dep
|
||||
@@ -0,0 +1,81 @@
|
||||
/************************************************************************************
|
||||
* configs/viewtool-stm32f107/src/stm32_boot.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <debug.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "viewtool_stm32f107.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void)
|
||||
{
|
||||
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
|
||||
* stm32_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
|
||||
if (stm32_spiinitialize)
|
||||
{
|
||||
stm32_spiinitialize();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
@@ -0,0 +1,132 @@
|
||||
/************************************************************************************
|
||||
* configs/viewtool-stm32f107/src/stm32_can.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/can.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
#include "stm32.h"
|
||||
#include "stm32_can.h"
|
||||
|
||||
#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
/* The STM32F107VC supports CAN1 and CAN2 */
|
||||
|
||||
#define CAN_PORT 1
|
||||
|
||||
/* Debug ***************************************************************************/
|
||||
/* Non-standard debug that may be enabled just for testing CAN */
|
||||
|
||||
#ifdef CONFIG_DEBUG_CAN
|
||||
# define candbg dbg
|
||||
# define canvdbg vdbg
|
||||
# define canlldbg lldbg
|
||||
# define canllvdbg llvdbg
|
||||
#else
|
||||
# define candbg(x...)
|
||||
# define canvdbg(x...)
|
||||
# define canlldbg(x...)
|
||||
# define canllvdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: can_devinit
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following interface to work with
|
||||
* examples/can.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int can_devinit(void)
|
||||
{
|
||||
static bool initialized = false;
|
||||
struct can_dev_s *can;
|
||||
int ret;
|
||||
|
||||
/* Check if we have already initialized */
|
||||
|
||||
if (!initialized)
|
||||
{
|
||||
/* Call stm32_caninitialize() to get an instance of the CAN interface */
|
||||
|
||||
can = stm32_caninitialize(CAN_PORT);
|
||||
if (can == NULL)
|
||||
{
|
||||
candbg("ERROR: Failed to get CAN interface\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the CAN driver at "/dev/can0" */
|
||||
|
||||
ret = can_register("/dev/can0", can);
|
||||
if (ret < 0)
|
||||
{
|
||||
candbg("ERROR: can_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Now we are initialized */
|
||||
|
||||
initialized = true;
|
||||
}
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_CAN && CONFIG_STM32_CAN1 */
|
||||
@@ -0,0 +1,164 @@
|
||||
/************************************************************************************
|
||||
* configs/viewtool-stm32f107/src/stm32_spi.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "chip.h"
|
||||
#include "stm32.h"
|
||||
#include "viewtool_stm32f107.h"
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
|
||||
|
||||
#undef SPI_DEBUG /* Define to enable debug */
|
||||
#undef SPI_VERBOSE /* Define to enable verbose debug */
|
||||
|
||||
#ifdef SPI_DEBUG
|
||||
# define spidbg lldbg
|
||||
# ifdef SPI_VERBOSE
|
||||
# define spivdbg lldbg
|
||||
# else
|
||||
# define spivdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef SPI_VERBOSE
|
||||
# define spidbg(x...)
|
||||
# define spivdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the Viewtools stm32f103/107 board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function stm32_spiinitialize(void)
|
||||
{
|
||||
/* NOTE: Clocking for SPIx was already provided in stm32_rcc.c.
|
||||
* Configurations of SPI pins is performed in stm32_spi.c.
|
||||
* Here, we only initialize chip select pins unique to the board
|
||||
* architecture.
|
||||
*/
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1/2/3select and stm32_spi1/2/3status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
|
||||
* provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common STM32 logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
|
||||
* pins.
|
||||
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
|
||||
* board-specific logic. These functions will perform chip selection and
|
||||
* status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 || CONFIG_STM32_SPI3*/
|
||||
@@ -0,0 +1,67 @@
|
||||
/******************************************************************************
|
||||
* configs/viewtool-stm32f107/src/viewtool_stm32f107.h
|
||||
*
|
||||
* Copyright (C) 2013 Max Holtzberg. All rights reserved.
|
||||
* Author: Max Holtzberg <mholtzberg@uvc-ingenieure.de>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************/
|
||||
#ifndef __CONFIGS_VIEWTOOLS_STM32F107_SRC_INTERNAL_H
|
||||
#define __CONFIGS_VIEWTOOLS_STM32F107_SRC_INTERNAL_H
|
||||
|
||||
/******************************************************************************
|
||||
* Included Files
|
||||
******************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/******************************************************************************
|
||||
* Pre-processor Definitions
|
||||
******************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the M3 Wildfire board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function stm32_spiinitialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_VIEWTOOLS_STM32F107_SRC_INTERNAL_H */
|
||||
Reference in New Issue
Block a user