diff --git a/ChangeLog b/ChangeLog
index 6b8bf1cb95b..3c7b5f1ffd5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -6132,3 +6132,8 @@
driver by calling unregister_blockdriver(). But (5)
unregister_blockdriver() also takes the inode semaphore causing a
deadlock if the inode semaphore is not re-entry. (2013-11-28).
+ * configs/viewtool-stm32f107: Add board support for the ViewTool
+ STM32F103/F107 board with the STM32F107VCT6 installed. Initial
+ check-in is the unverfied board-support framework only
+ (2013-11-30).
+
diff --git a/Documentation/README.html b/Documentation/README.html
index 9cad7087f8c..75883709f00 100644
--- a/Documentation/README.html
+++ b/Documentation/README.html
@@ -202,6 +202,8 @@
| | | `- README.txt
| | |- us7032evb1/
| | | `- README.txt
+ | | |- viewtool-stm32f107/
+ | | | `- README.txt
| | |- vsn/
| | | |- src/README.txt
| | | `- README.txt
diff --git a/README.txt b/README.txt
index f060faa480e..b293bfe868f 100644
--- a/README.txt
+++ b/README.txt
@@ -1130,6 +1130,8 @@ nuttx
| | `- README.txt
| |- us7032evb1/
| | `- README.txt
+ | |- viewtool-stm32f107/
+ | | `- README.txt
| |- vsn/
| | |- src/README.txt
| | `- README.txt
diff --git a/configs/Kconfig b/configs/Kconfig
index d76659a3f15..8778800cd3b 100644
--- a/configs/Kconfig
+++ b/configs/Kconfig
@@ -724,6 +724,16 @@ config ARCH_BOARD_US7032EVB1
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
STATUS: Work has just began on this port.
+config ARCH_BOARD_VIEWTOOL_STM32F107
+ bool "ViewTool STM32F103/F107 with STM32F107"
+ depends on ARCH_CHIP_STM32F107VC
+ select ARCH_HAVE_LEDS
+ select ARCH_HAVE_BUTTONS
+ ---help---
+ This port uses the ViewTool STM32F103/F107 V1.2 board. This
+ board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
+ See http://www.viewtool.com/ for further information.
+
config ARCH_BOARD_VSN
bool "SOTEL NetClamps VSN sensor network platform"
depends on ARCH_CHIP_STM32F103RET6
@@ -891,6 +901,7 @@ config ARCH_BOARD
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
default "ubw32" if ARCH_BOARD_UBW32
default "us7032evb1" if ARCH_BOARD_US7032EVB1
+ default "viewtool-stm32f107" if ARCH_BOARD_VIEWTOOL_STM32F107
default "vsn" if ARCH_BOARD_VSN
default "xtrs" if ARCH_BOARD_XTRS
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG
@@ -1167,6 +1178,9 @@ endif
if ARCH_BOARD_US7032EVB1
source "configs/us7032evb1/Kconfig"
endif
+if ARCH_BOARD_VIEWTOOL_STM32F107
+source "configs/viewtool-stm32f107/Kconfig"
+endif
if ARCH_BOARD_VSN
source "configs/vsn/Kconfig"
endif
diff --git a/configs/README.txt b/configs/README.txt
index 8db117c575b..a113500e14e 100644
--- a/configs/README.txt
+++ b/configs/README.txt
@@ -2070,6 +2070,11 @@ configs/us7032evb1
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
STATUS: Work has just began on this port.
+configs/viewtool-stm32f107
+ NuttX configurations for the ViewTool STM32F103/F107 V1.2 board. This
+ board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
+ See http://www.viewtool.com/ for further information.
+
configs/vsn
ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the
STMicro STM32F103RET6. Contributed by Uros Platise. See
diff --git a/configs/viewtool-stm32f107/Kconfig b/configs/viewtool-stm32f107/Kconfig
new file mode 100644
index 00000000000..22b4b7a00e2
--- /dev/null
+++ b/configs/viewtool-stm32f107/Kconfig
@@ -0,0 +1,7 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_VIEWTOOLS_STM32F107
+endif
diff --git a/configs/viewtool-stm32f107/README.txt b/configs/viewtool-stm32f107/README.txt
new file mode 100644
index 00000000000..d50cc137499
--- /dev/null
+++ b/configs/viewtool-stm32f107/README.txt
@@ -0,0 +1,53 @@
+README
+======
+
+ This README discusses issues unique to NuttX configurations for the
+ ViewTool STM32F103/F107 V1.2 board. This board may be fitted with either
+
+ - STM32F107VCT6, or
+ - STM32F103VCT6
+
+ The board is vary module with connectors for a variety of peripherals.
+ Features on the base board include:
+
+ - User and Wake-Up Keys
+ - LEDs
+
+ http://www.viewtool.com/ for further information.
+
+User and Wake-Up keys
+=====================
+
+ All pulled high and will be sensed low when depressed.
+
+ SW2 PC11 Needs J42 closed
+ SW3 PC12 Needs J43 closed
+ SW4 PA0 Needs J44 closed
+
+LEDs
+====
+
+ All pulled high and can be illuminated by driving the output to low
+
+ LED1 PA6
+ LED2 PA7
+ LED3 PB12
+ LED4 PB13
+
+Serial Console
+==============
+
+ The boards come with a PL-2303 based USB-to-serial board. Also available
+ as an option is an RS-232 board. Both have the same pin out on a 6-pin
+ connector that mates with the upper row of J5.
+
+ PIN MODULE BOARD J5
+ --- ------ ---------------------------
+ 1 5V 1 POWER Power jumper
+ 2 GND 3 GND Ground
+ 3 TXD 5 RXD1 PA10 USART1_RXD
+ 4 RXD 7 TXD1 PA9 USART1_TXD
+ 5 RTS? 9 CTS? PA12 USART1_RTS
+ 6 CTS? 11 RTS? PA11 USART1_CTS
+
+ Note: This requires USART1 pin remapping
\ No newline at end of file
diff --git a/configs/viewtool-stm32f107/include/board.h b/configs/viewtool-stm32f107/include/board.h
new file mode 100644
index 00000000000..f0857977db2
--- /dev/null
+++ b/configs/viewtool-stm32f107/include/board.h
@@ -0,0 +1,155 @@
+/************************************************************************************
+ * configs/viewtool-stm32f107/include/board.h
+ *
+ * Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_VIEWTOOLS_STM32F107_INCLUDE_BOARD_H
+#define __CONFIGS_VIEWTOOLS_STM32F107_INCLUDE_BOARD_H 1
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+
+#ifndef __ASSEMBLY__
+# include
+#endif
+#include "stm32_rcc.h"
+#include "stm32_sdio.h"
+#include "stm32.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* HSI - 8 MHz RC factory-trimmed
+ * LSI - 40 KHz RC (30-60KHz, uncalibrated)
+ * HSE - On-board crystal frequency is 25MHz
+ * LSE - 32.768 kHz
+ */
+
+#define STM32_BOARD_XTAL 25000000ul
+
+#define STM32_HSI_FREQUENCY 8000000ul
+#define STM32_LSI_FREQUENCY 40000
+#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY 32768
+
+/* PLL ouput is 72MHz */
+
+#define STM32_PLL_PREDIV2 RCC_CFGR2_PREDIV2d5 /* 25MHz / 5 => 5MHz */
+#define STM32_PLL_PLL2MUL RCC_CFGR2_PLL2MULx8 /* 5MHz * 8 => 40MHz */
+#define STM32_PLL_PREDIV1 RCC_CFGR2_PREDIV1d5 /* 40MHz / 5 => 8MHz */
+#define STM32_PLL_PLLMUL RCC_CFGR_PLLMUL_CLKx9 /* 8MHz * 9 => 72Mhz */
+#define STM32_PLL_FREQUENCY (72000000)
+
+/* SYCLLK and HCLK are the PLL frequency */
+
+#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
+#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
+#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
+
+/* APB2 clock (PCLK2) is HCLK (72MHz) */
+
+#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
+#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
+#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 2-7, 12-14 */
+
+/* APB2 timers 1 and 8 will receive PCLK2. */
+
+#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
+
+/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
+
+#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
+#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
+
+/* APB1 timers 2-4 will be twice PCLK1 (I presume the remaining will receive PCLK1) */
+
+#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN (STM32_PCLK1_FREQUENCY)
+
+/* MCO output driven by PLL3. From above, we already have PLL3 input frequency as:
+ *
+ * STM32_PLL_PREDIV2 = 5, 25MHz / 5 => 5MHz
+ */
+
+#if defined(CONFIG_STM32_MII_MCO) || defined(CONFIG_STM32_RMII_MCO)
+# define BOARD_CFGR_MCO_SOURCE RCC_CFGR_PLL3CLK /* Source: PLL3 */
+# define STM32_PLL_PLL3MUL RCC_CFGR2_PLL3MULx10 /* MCO 5MHz * 10 = 50MHz */
+#endif
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ * All STM32 architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void stm32_boardinitialize(void);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_VIEWTOOLS_STM32F107_INCLUDE_BOARD_H */
diff --git a/configs/viewtool-stm32f107/nsh/Make.defs b/configs/viewtool-stm32f107/nsh/Make.defs
new file mode 100644
index 00000000000..1e146240cce
--- /dev/null
+++ b/configs/viewtool-stm32f107/nsh/Make.defs
@@ -0,0 +1,115 @@
+############################################################################
+# configs/viewtool-stm32f107/nsh/Make.defs
+#
+# Copyright (C) 2013 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+ifeq ($(CONFIG_STM32_DFU),y)
+ LDSCRIPT = ld.script.dfu
+else
+ LDSCRIPT = ld.script
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/copydir.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+ MAXOPTIMIZATION = -O2
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/viewtool-stm32f107/nsh/defconfig b/configs/viewtool-stm32f107/nsh/defconfig
new file mode 100644
index 00000000000..21d2b87d370
--- /dev/null
+++ b/configs/viewtool-stm32f107/nsh/defconfig
@@ -0,0 +1,889 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM4 is not set
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+# CONFIG_ARCH_HAVE_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_SERIAL_TERMIOS is not set
+# CONFIG_NET_MULTICAST is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+CONFIG_ARCH_CHIP_STM32F107VC=y
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+CONFIG_STM32_STM32F10XX=y
+# CONFIG_STM32_VALUELINE is not set
+CONFIG_STM32_CONNECTIVITYLINE=y
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+# CONFIG_STM32_STM32F40XX is not set
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKP is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+CONFIG_STM32_USART1=y
+# CONFIG_STM32_USART2 is not set
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USB is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+CONFIG_STM32_USART1_REMAP=y
+# CONFIG_STM32_JTAG_DISABLE is not set
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+# CONFIG_STM32_JTAG_SW_ENABLE is not set
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART1_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=5483
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=65536
+
+#
+# Board Selection
+#
+# CONFIG_ARCH_BOARD_CLOUDCTRL is not set
+# CONFIG_ARCH_BOARD_OLIMEX_STM32P107 is not set
+# CONFIG_ARCH_BOARD_SHENZHOU is not set
+CONFIG_ARCH_BOARD_VIEWTOOL_STM32F107=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="viewtool-stm32f107"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2009
+CONFIG_START_MONTH=9
+CONFIG_START_DAY=21
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=17
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART1=y
+
+#
+# USART Configuration
+#
+CONFIG_USART1_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_SERIAL_NPOLLWAITERS=2
+CONFIG_USART1_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART1 Configuration
+#
+CONFIG_USART1_RXBUFSIZE=256
+CONFIG_USART1_TXBUFSIZE=256
+CONFIG_USART1_BAUD=115200
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+# CONFIG_USART1_IFLOWCONTROL is not set
+# CONFIG_USART1_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+CONFIG_ARCH_HAVE_NET=y
+# CONFIG_ARCH_HAVE_PHY is not set
+CONFIG_NET=y
+# CONFIG_NET_NOINTS is not set
+CONFIG_NET_MULTIBUFFER=y
+# CONFIG_NET_PROMISCUOUS is not set
+# CONFIG_NET_IPv6 is not set
+CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NET_NACTIVESOCKETS=16
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=650
+# CONFIG_NET_TCPURGDATA is not set
+
+#
+# TCP/IP Networking
+#
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=8
+CONFIG_NET_TCP_RECVDELAY=0
+# CONFIG_NET_TCPBACKLOG is not set
+# CONFIG_NET_TCP_SPLIT is not set
+# CONFIG_NET_SENDFILE is not set
+
+#
+# UDP Networking
+#
+CONFIG_NET_UDP=y
+# CONFIG_NET_UDP_CHECKSUMS is not set
+CONFIG_NET_UDP_CONNS=8
+# CONFIG_NET_BROADCAST is not set
+# CONFIG_NET_RXAVAIL is not set
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
+# CONFIG_NET_PINGADDRCONF is not set
+# CONFIG_NET_IGMP is not set
+# CONFIG_NET_STATISTICS is not set
+CONFIG_NET_RECEIVE_WINDOW=562
+CONFIG_NET_ARPTAB_SIZE=16
+# CONFIG_NET_ARP_IPIN is not set
+# CONFIG_NET_ROUTE is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=1024
+# CONFIG_SCHED_LPWORK is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_XMLRPC is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+CONFIG_NETUTILS_RESOLV=y
+CONFIG_NET_RESOLV_ENTRIES=8
+CONFIG_NET_RESOLV_MAXRESPONSE=96
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+CONFIG_NETUTILS_TFTPC=y
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_UIPLIB=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_NSH_FILEIOSIZE=1024
+CONFIG_NSH_LINELEN=80
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+# CONFIG_NSH_TELNET is not set
+CONFIG_NSH_IPADDR=0xc0a80232
+CONFIG_NSH_DRIPADDR=0xc0a80201
+CONFIG_NSH_NETMASK=0xffffff00
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_MAX_ROUNDTRIP=20
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/configs/viewtool-stm32f107/nsh/setenv.sh b/configs/viewtool-stm32f107/nsh/setenv.sh
new file mode 100755
index 00000000000..66742692ba4
--- /dev/null
+++ b/configs/viewtool-stm32f107/nsh/setenv.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+# configs/viewtool-stm32f107/nsh/setenv.sh
+#
+# Copyright (C) 2013 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+ echo "This script must be executed from the top-level NuttX build directory"
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+ export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows. You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows. You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows. You will also have to edit this if you install
+# the Atollic toolchain in any other location. /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/configs/viewtool-stm32f107/scripts/ld.script b/configs/viewtool-stm32f107/scripts/ld.script
new file mode 100644
index 00000000000..a4965132f8f
--- /dev/null
+++ b/configs/viewtool-stm32f107/scripts/ld.script
@@ -0,0 +1,112 @@
+/****************************************************************************
+ * configs/viewtool-stm32f107/scripts/ld.script
+ *
+ * Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K
+ sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
+
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ .init_section : {
+ _sinit = ABSOLUTE(.);
+ *(.init_array .init_array.*)
+ _einit = ABSOLUTE(.);
+ } > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } > flash
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } > flash
+ __exidx_end = ABSOLUTE(.);
+
+ _eronly = ABSOLUTE(.);
+
+ /* The STM32F107VC has 64Kb of SRAM beginning at the following address */
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .bss : {
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/viewtool-stm32f107/scripts/ld.script.dfu b/configs/viewtool-stm32f107/scripts/ld.script.dfu
new file mode 100644
index 00000000000..d3f0d4cf9ac
--- /dev/null
+++ b/configs/viewtool-stm32f107/scripts/ld.script.dfu
@@ -0,0 +1,112 @@
+/****************************************************************************
+ * configs/viewtool-stm32f107/scripts/ld.script.dfu
+ *
+ * Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* Don't know if this is correct. Just 256K-48K (not testet) */
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x08003000, LENGTH = 208K
+ sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ .init_section : {
+ _sinit = ABSOLUTE(.);
+ *(.init_array .init_array.*)
+ _einit = ABSOLUTE(.);
+ } > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } > flash
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } > flash
+ __exidx_end = ABSOLUTE(.);
+
+ _eronly = ABSOLUTE(.);
+
+ /* The STM32F103Z has 64Kb of SRAM beginning at the following address */
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .bss : {
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/viewtool-stm32f107/src/.gitignore b/configs/viewtool-stm32f107/src/.gitignore
new file mode 100644
index 00000000000..726d936e1e3
--- /dev/null
+++ b/configs/viewtool-stm32f107/src/.gitignore
@@ -0,0 +1,2 @@
+/.depend
+/Make.dep
diff --git a/configs/viewtool-stm32f107/src/Makefile b/configs/viewtool-stm32f107/src/Makefile
new file mode 100644
index 00000000000..f011cf9ce72
--- /dev/null
+++ b/configs/viewtool-stm32f107/src/Makefile
@@ -0,0 +1,88 @@
+############################################################################
+# configs/viewtool-stm32f107/src/Makefile
+#
+# Copyright (C) 2013 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS += -I$(TOPDIR)/sched
+
+ASRCS =
+AOBJS = $(ASRCS:.S=$(OBJEXT))
+
+CSRCS = stm32_boot.c stm32_spi.c
+
+ifeq ($(CONFIG_CAN),y)
+CSRCS += stm32_can.c
+endif
+
+COBJS = $(CSRCS:.c=$(OBJEXT))
+
+SRCS = $(ASRCS) $(CSRCS)
+OBJS = $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+ CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+ -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+ -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+ CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+ $(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+ $(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+ $(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+ $(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+ $(Q) touch $@
+
+depend: .depend
+
+clean:
+ $(call DELFILE, libboard$(LIBEXT))
+ $(call CLEAN)
+
+distclean: clean
+ $(call DELFILE, Make.dep)
+ $(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/configs/viewtool-stm32f107/src/stm32_boot.c b/configs/viewtool-stm32f107/src/stm32_boot.c
new file mode 100644
index 00000000000..7fd06f3e5ec
--- /dev/null
+++ b/configs/viewtool-stm32f107/src/stm32_boot.c
@@ -0,0 +1,81 @@
+/************************************************************************************
+ * configs/viewtool-stm32f107/src/stm32_boot.c
+ *
+ * Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+#include
+#include
+
+#include "up_arch.h"
+#include "viewtool_stm32f107.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ * All STM32 architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void stm32_boardinitialize(void)
+{
+ /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
+ * stm32_spiinitialize() has been brought into the link.
+ */
+
+#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
+ if (stm32_spiinitialize)
+ {
+ stm32_spiinitialize();
+ }
+#endif
+}
diff --git a/configs/viewtool-stm32f107/src/stm32_can.c b/configs/viewtool-stm32f107/src/stm32_can.c
new file mode 100644
index 00000000000..38dfa340e50
--- /dev/null
+++ b/configs/viewtool-stm32f107/src/stm32_can.c
@@ -0,0 +1,132 @@
+/************************************************************************************
+ * configs/viewtool-stm32f107/src/stm32_can.c
+ *
+ * Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+
+#include
+#include
+
+#include
+#include
+
+#include "chip.h"
+#include "up_arch.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+
+#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+/* The STM32F107VC supports CAN1 and CAN2 */
+
+#define CAN_PORT 1
+
+/* Debug ***************************************************************************/
+/* Non-standard debug that may be enabled just for testing CAN */
+
+#ifdef CONFIG_DEBUG_CAN
+# define candbg dbg
+# define canvdbg vdbg
+# define canlldbg lldbg
+# define canllvdbg llvdbg
+#else
+# define candbg(x...)
+# define canvdbg(x...)
+# define canlldbg(x...)
+# define canllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ * All STM32 architectures must provide the following interface to work with
+ * examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+ static bool initialized = false;
+ struct can_dev_s *can;
+ int ret;
+
+ /* Check if we have already initialized */
+
+ if (!initialized)
+ {
+ /* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+ can = stm32_caninitialize(CAN_PORT);
+ if (can == NULL)
+ {
+ candbg("ERROR: Failed to get CAN interface\n");
+ return -ENODEV;
+ }
+
+ /* Register the CAN driver at "/dev/can0" */
+
+ ret = can_register("/dev/can0", can);
+ if (ret < 0)
+ {
+ candbg("ERROR: can_register failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Now we are initialized */
+
+ initialized = true;
+ }
+
+ return OK;
+}
+
+#endif /* CONFIG_CAN && CONFIG_STM32_CAN1 */
diff --git a/configs/viewtool-stm32f107/src/stm32_spi.c b/configs/viewtool-stm32f107/src/stm32_spi.c
new file mode 100644
index 00000000000..38f4acd8195
--- /dev/null
+++ b/configs/viewtool-stm32f107/src/stm32_spi.c
@@ -0,0 +1,164 @@
+/************************************************************************************
+ * configs/viewtool-stm32f107/src/stm32_spi.c
+ *
+ * Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "chip.h"
+#include "stm32.h"
+#include "viewtool_stm32f107.h"
+
+#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#undef SPI_DEBUG /* Define to enable debug */
+#undef SPI_VERBOSE /* Define to enable verbose debug */
+
+#ifdef SPI_DEBUG
+# define spidbg lldbg
+# ifdef SPI_VERBOSE
+# define spivdbg lldbg
+# else
+# define spivdbg(x...)
+# endif
+#else
+# undef SPI_VERBOSE
+# define spidbg(x...)
+# define spivdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the Viewtools stm32f103/107 board.
+ *
+ ************************************************************************************/
+
+void weak_function stm32_spiinitialize(void)
+{
+ /* NOTE: Clocking for SPIx was already provided in stm32_rcc.c.
+ * Configurations of SPI pins is performed in stm32_spi.c.
+ * Here, we only initialize chip select pins unique to the board
+ * architecture.
+ */
+}
+
+/****************************************************************************
+ * Name: stm32_spi1/2/3select and stm32_spi1/2/3status
+ *
+ * Description:
+ * The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
+ * provided by board-specific logic. They are implementations of the select
+ * and status methods of the SPI interface defined by struct spi_ops_s (see
+ * include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
+ * are provided by common STM32 logic. To use this common SPI logic on your
+ * board:
+ *
+ * 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
+ * pins.
+ * 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
+ * board-specific logic. These functions will perform chip selection and
+ * status operations using GPIOs in the way your board is configured.
+ * 3. Add a calls to up_spiinitialize() in your low level application
+ * initialization logic
+ * 4. The handle returned by up_spiinitialize() may then be used to bind the
+ * SPI driver to higher level logic (e.g., calling
+ * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ * the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_SPI1
+void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+ spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+}
+
+uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_STM32_SPI2
+void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+ spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+}
+
+uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_STM32_SPI2
+void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+ spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+}
+
+uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+ return 0;
+}
+#endif
+
+#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 || CONFIG_STM32_SPI3*/
diff --git a/configs/viewtool-stm32f107/src/viewtool_stm32f107.h b/configs/viewtool-stm32f107/src/viewtool_stm32f107.h
new file mode 100644
index 00000000000..ae4d8eac963
--- /dev/null
+++ b/configs/viewtool-stm32f107/src/viewtool_stm32f107.h
@@ -0,0 +1,67 @@
+/******************************************************************************
+ * configs/viewtool-stm32f107/src/viewtool_stm32f107.h
+ *
+ * Copyright (C) 2013 Max Holtzberg. All rights reserved.
+ * Author: Max Holtzberg
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************/
+#ifndef __CONFIGS_VIEWTOOLS_STM32F107_SRC_INTERNAL_H
+#define __CONFIGS_VIEWTOOLS_STM32F107_SRC_INTERNAL_H
+
+/******************************************************************************
+ * Included Files
+ ******************************************************************************/
+
+#include
+#include
+#include
+
+/******************************************************************************
+ * Pre-processor Definitions
+ ******************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the M3 Wildfire board.
+ *
+ ************************************************************************************/
+
+void weak_function stm32_spiinitialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_VIEWTOOLS_STM32F107_SRC_INTERNAL_H */