Only affects builds with ROTATION_ENABLE defined; the offending code is inside
#ifdef ROTATION_ENABLE, so default builds are unaffected.
The rotation-transform block was entered for any axis-word motion without
excluding NonModal_AbsoluteOverride, so G53 (absolute machine override) moves
had the active WCS offset added to the plane axes (and were rotated). Per
RS274/NGC a G53 target is in machine coordinates and must ignore all offsets
and rotation.
Symptom: with a non-zero WCS rotation active (e.g. set by G10 L2 R / G68), G53
drives to the rotated work origin instead of the machine target, false-
triggering a soft-limit alarm when that lands outside the machine envelope.
Guard the transform with `non_modal_command != NonModal_AbsoluteOverride`, and
initialise r_axes.mask = 0 so it stays defined when the block is bypassed.
Added P-word option to G38.x probe commands, use to temporarily switch the probe input when multiple probes are available.
Fixed PWM spindle ramping, did not hit the target RPM.
Changes to allow stepper spindle to use per degree settings, ref. issue 926.
Changes for improved line number reporting for subroutines and branching gcode.
Added support for G66.1 macro call.
Changed behaviour of G50 and G51 (and the G48 and G49 shortcuts) controlling feed rate and spindle RPM overrides.
Added support for G10L0, reload file based tool table.
Fixed buggy handling of G43 - apply tool offset from tool table.
Refactored the encoder HAL/API to make it more flexible and as a first step to support rigid tapping.
See the changelog for further details.
Improved alarm handling, if a critical alarm is active when a non-critical alarm is raised the non-critical alarm will be delayed until after reset for the critical alarm.
Improved Modbus exception handling and added high level API call for creating and sending Modbus messages.
Added G65P7 inbuilt macro for interacting with Modbus devices from gcode. See the Wiki for details.
$700 controls whether they are scanned for internally in the main program (1) or always located externally (0).
If scanned for internally the program is run twice, initially in check mode to locate the subroutines before it is rewound and run in normal mode.
If stored externally the file P<macro number>.macro is run, <macro number> is the M98 P value.
Added experimental support for G66 (modal macro call) and G67 (end modal macro call).
Made axis letter to axis/motor assignment for axes ABCUVW freely changeable at compile time.
Fix for some G65 arguments being incorrectly validated for normal use (sign, range).
Added repeat support to G65 macro call via the optional L parameter word.
Changed default setting for ABC-axes to rotary.
Changed defaults for jerk settings to 10x acceleration settings.
Disabled jerk for jog, probe and spindle synchronized motion.
Added _active_probe system parameter, returns -1 if no probe inputs available.
Minor bug fix, G5.1 and G33.1 motion commands were not coverted to the correct string equivalent in $G output.
Added tool name, pocket number and some lathe specific data fields to the $# tool output when available from the tool table.
If name is available it will be output as a push message on M6 if there is no message in the same block.
Added support for directory up, .., to VFS.
Added new option to $650 - File systems options to enable hierarchical listing of files and directories via $F and $F+ commands.
Added ADC/DAC resolution to $pinstate command, changed reported values to integer for ADC/DAC devices and float formatted for PWM devices.
Numeric settings can now be set via G65P1Q<n>S<value>, <n> is the setting number, <value> is the new value.
Changed alarm code for Modbus exceptions (communication errors) from 14 to 19.
Refactored MPG stream code to allow plugins to hook into MPG streams (via event handler).
Added _free memory system parameter, returns value in KBytes or -1 if not available from driver.
Changed basic stream data type from char to uint8_t, added HAL function and core API for releasing/closing UART streams.
Some minor bug fixes such as incorrect error code returned for unknown $-commands and temporary incorrect position reporting on in-flight G92 offset changes.
Added lightweight JSON serializer outputting directly to file.
Fix for event handler sometimes called too early. Ref. issue #818.
For developers: added optional device filing system that can redirect file read/write to serial streams.
For programmers: added grbl.on_control_signals_changed event, fired on some signals: optional stop, single step, block delete and cycle start.
Fix for incorrect handling of arcs when negative scaling is enabled with G51.
Changed $I NEWOPT "ATC" element to ATC=1 when ATC is online and ATC=0 when offline.
For macro based ATC code this is set to ATC=0 if tc.macro is not found and the new $675 flag is set.
Named system parameters _current_pocket and _selected_pocket updated to return the correct values.
Moved handling of keeping last tool number over reboot from template plugin to the core.
Added named system parameters _homed_state and _homed_axes.
Fix for failure to claim auxiliary ports in some configurations.
Moved inbuilt G65 macros to the core and added macro G65P5Q<n> for selecting probe.
Added probe id to real time report: |P:<n> will be reported on probe select when more than one probe is available.
Fix for WCO and Ov real time status report elements not beeing reported as they should in some circumstances.
these instead of calling via hal.port functions or accessing hal.port properties.
Improved the ioports API, updated core code to make use of it.
Flagged some calls and (part of) some stuctures as deprecated.
Added '$709' setting for second PWM spindle when available - PWM options.
Added properties to PWM spindles to allow "overdriving" PWM output when _RPM controls spindle enable signal is enabled with '$9' or '$709'.
Optimized Modbus CRC calculation, may fix issue with a compiler generating different code compared to most others. Ref. issue #723.
Added HAL parameter for minimum step pulse length set by driver, used for validation of $0 setting.
Changed HAL API signature for outputting step pulses, optimized to allow drivers to only change direction outputs when there is an actual direction change.
Improved handling of overrides at end of program when all motion is buffered. Possible fix for issue #714.
Some optimizations to allow higher step rates.
No longer copies spindle on delay from door setting ($392) to the new general setting ($340) on update from pre 20250103 builds.
Fixed missed code change when general spindle on delay was implemented causing the delay to be inserted on a simple RPM change with the S word.
new HAL entry point for querying/resetting driver status.
Added driver capability flags and settings, $742 - $745, for enabling and inverting motor warning and fault input signals (per axis).
Improved jerk acceleration. Ref. PR #660.
Some low-level ioport improvements, added definition for virtual pins/ports.
Deprecated direct access to number of the different ioport ports in hal.port struct, use ioports_unclaimed() instead.
Terje Io
stevenrwood
Torsten Martinsen
terjeio
Dietz0randGitHub