Commit Graph
25305 Commits
Author SHA1 Message Date
Andy Piper 94de238751 AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu. 2021-02-20 14:37:11 +11:00
Andy Piper f9c5f9be00 AP_HAL_ChibiOS: make dshot DMA unlock event driven in order to allow unlocking from rcout thread
refactor rcout into separate thread and process all dshot requests there
move uart DMA completion to event model
process dshot locks in strick reverse order when unlocking
convert Shared_DMA to use mutexes
move UART transmit to a thread-per-uart
do blocking UART DMA transactions
do blocking dshot DMA transactions
trim stack sizes
cancel dma transactions on dshot when timeout occurs
support contention stats on blocking locking
move thread supression into chibios_hwdef.py
invalidate DMA bounce buffer correctly
separate UART initialisation into two halves
cleanup UART transaction timeouts
add @SYS/uarts.txt
move half-duplex handling to TX thread
correct thread statistics after use of ExpandingString
set unbuffered TX thread priority owner + 1
correctly unlock serial_led_send()
don't share IMU RX on KakuteF7Mini
observe dshot pulse time more accurately.
set TRBUFF bit for UART DMA transfers
deal with UART DMA timeouts correctly
don't deadlock on reverse ordered DMA locks
change PORT_INT_REQUIRED_STACK to 128
2021-02-20 14:37:11 +11:00
Andy Piper c388fd9214 AP_Filesystem: add @SYS/uarts.txt 2021-02-20 14:37:11 +11:00
Andy Piper a07b238c7d AP_HAL: add PRIORITY_RCOUT
don't allow UART copies
add @SYS/uarts.txt
2021-02-20 14:37:11 +11:00
Iampete1 bf7920f2d7 AP_Scripting: use helper for not supported error saving 1K of flash 2021-02-18 15:12:58 -07:00
Leonard Hall f0f87be06d AC_PID: AC_PI_2D format changes 2021-02-18 12:59:39 +09:00
mateksys 7eb4e9b370 AP_Periph: set PORT defaults for F405-MatekGPS 2021-02-18 11:51:50 +11:00
mateksys 97c2b7228e AP_Periph: Matek F303 and F405 AP_Periph use DSP310 baro 2021-02-18 11:51:50 +11:00
Tom Pittenger 8019cc160a AP_ICEngine: make it obvious that update_idle_gov does nothing if disabled 2021-02-18 09:45:30 +11:00
Peter Barker f124cf0991 AP_Hott_Telem: use GPS single-char representation of fix type 2021-02-18 08:59:23 +11:00
Peter Barker 9da9d8c94b AP_GPS: provide method for getting single char representing fix type
Should allow us to be consistent across places in the code base that
need a compact representation for a user display.
2021-02-18 08:59:23 +11:00
Leonard Hall e788d63686 AC_AttitudeControl: clear up comment for inertial_frame_reset 2021-02-17 21:19:18 +09:00
Andy Piper 4c2cbdab8d AP_HAL_ChibiOS: only setup half-duplex for receive when transmit is fully over 2021-02-17 20:09:48 +11:00
Andy Piper 5c32007cdf AP_HAL_ChibiOS: ensure stop bits can be set before UART begin 2021-02-17 20:09:48 +11:00
Peter Hall 43763091bd AP_Scripting: add send_named_float to simple loop example 2021-02-17 18:49:20 +11:00
Peter Hall fc95664580 AP_Scripting: add GCS send_named_float binding 2021-02-17 18:49:20 +11:00
Andy Piper 3371c272fb AP_Notify: make LED_NTF_LEN changes require a reboot
don't dynamically update LED length
2021-02-17 18:36:36 +11:00
Andy Piper 3a9107245c AP_HAL_ChibiOS: allocate DMA and LED buffers correctly when the length changes
calculate DMAR pulse times correctly
ensure 50us pulse separation for LED
make sure the LEDs are signalled for output
only allow LED length to be set once
2021-02-17 18:36:36 +11:00
Andy Piperandluis.martinez.exts a98f85502a AP_RCTelemetry: add support for SmartAudio protocol.
treat VTX frequency as a first class citizen, match band/channel to frequency
update CRSF to use new VTX configuration
use a 6-position switch to control VTX power
add support for VTX GCS announcement
announce VTX updates on CRSF
support pitmode-until-arm and pitmode-on-disarm

Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
2021-02-17 18:23:33 +11:00
Andy Piper ea3af39773 RC_Channel: add support for 6-position switch and use it for VTX power 2021-02-17 18:23:33 +11:00
Andy Piperandluis.martinez.exts 6f91e053d5 AP_VideoTX: new library to support the SmartAudio protocol
set the VTX parameters to what was actually configured by the VTX
use change band/change frequency when appropriate
set power levels appropriately for protocol version.

Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
2021-02-17 18:23:33 +11:00
Andy Piperandluis.martinez.exts 2d0fe8b883 AP_SerialManager: add support for the SmartAudio protocol
Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
2021-02-17 18:23:33 +11:00
Andy Piperandluis.martinez.exts b79ff9475d AP_Vehicle: add support for the SmartAudio protocol
Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
2021-02-17 18:23:33 +11:00
Peter Barker c20c4a6308 AP_HAL_SITL: set bus in read-size of rdwr transaction 2021-02-17 14:23:07 +11:00
Peter Barker 1c4e1aab05 AP_Logger: move gps logging structures into AP_GPS 2021-02-17 11:30:01 +11:00
Peter Barker c2cba52ad8 AP_GPS: move gps logging structures into AP_GPS 2021-02-17 11:30:01 +11:00
Peter Barker eefcc92f24 GCS_MAVLink: take MAV_CMD_DO_SPRAYER as a mavlink command 2021-02-16 22:36:43 +11:00
Peter Barker c3b005e1d9 AP_Mission: add mission command to turn sprayer on and off 2021-02-16 22:36:43 +11:00
Rishabh 98287a1b2f AC_Avoid: Use previous avoidance vel for limiting accel 2021-02-16 20:08:00 +09:00
Rishabh cbf57af1f3 AC_Avoid: Limit acceleration while simple avoidance is active 2021-02-16 20:08:00 +09:00
Rishabh 865f3cda79 AC_Avoid: Add param to switch off proximity avoidance based on alt 2021-02-16 20:08:00 +09:00
Peter Hall c1a831bbf4 GCS_MAVLink: sensor flags, only mark AHRS as enabled once initialised 2021-02-16 12:54:28 +11:00
Andrew Tridgell a42bfd5df5 AP_Baro: added MS5611 baro compensation for -15 to -40C 2021-02-16 11:20:57 +11:00
Michael du Breuil 4c4e613f6a AP_GPS: Don't send SBF config unless there is free space in the port 2021-02-15 16:31:45 -07:00
Michael du Breuil c0da87c066 AP_HAL_ChibiOS: Update HitecMosaic to reflect changes to GPS config 2021-02-15 16:31:45 -07:00
Michael du Breuil 4d42996068 AP_GPS: Force the buadrate on SBF units 2021-02-15 16:31:45 -07:00
Peter Barker 01eb64ce73 AP_RPM: don't present RPM2_PIN parameter if RPM_MAX_INSTANCES <=1 2021-02-16 08:26:18 +09:00
Andrew Tridgell 6d1511f3eb GCS_MAVLink: added method to force save calibration
useful after reloading parameters
2021-02-15 07:24:40 +11:00
Andrew Tridgell f8e0227c8c AP_Compass: added force_save_calibration() 2021-02-15 07:24:40 +11:00
Andrew Tridgell 25dd08a1fd AP_InertialSensor: added force_save_calibration() 2021-02-15 07:24:40 +11:00
Andrew Tridgell 9de1519928 HAL_ChibiOS: prevent hw flow control from hogging a DMA channel
When hw flow control is enabled check the CTS pin before we grab the
DMA channel to prevent a long timeout trying to send to a blocked port
from holding a DMA channel against another device

this fixes issue #16587
2021-02-15 07:23:56 +11:00
Andrew Tridgell 106162b0c5 AP_MSP: removed date/time from MSP
we don't want to use real dates here as that would mean we don't get
consistent builds. Being able to reproduce the exact build at a later
date is a valuable property of the code

The git hash should be enough
2021-02-13 19:24:48 +11:00
Andrew Tridgell 0cc4409845 HAL_ChibiOS: fixed handling of invalid channel for LED write
this prevents a null ptr dereference when an invalid channel (such as
one on IOMCU) is used for LEDs
2021-02-13 15:11:10 +11:00
Andrew Tridgell 098a17fe2e HAL_ChibiOS: fixed CubeOrange ADSB param name 2021-02-13 13:06:20 +11:00
Rishabh f107ce3951 AP_Proximity: Use 3 sectors for simple avoidance boundary 2021-02-12 16:48:16 +09:00
Rishabh 8cab737bdd AP_Proximity: Follow NED convention 2021-02-12 16:48:16 +09:00
Rishabh 74bda4952d AC_Avoid: Return early if velocity is unchanged in proximity avoidance 2021-02-12 16:48:16 +09:00
Randy Mackay eafd702773 AC_WPNav: add comment clarifying get_wp_destination alt frame 2021-02-11 13:01:37 +09:00
Mark Whitehorn bb15c18cc3 GCS_MAVLink: send message when MAVFTP init fails 2021-02-10 23:06:36 +11:00
Pierre Kancir eb78a473f6 AP_Vehicle: correct virtual specifier 2021-02-10 18:49:42 +11:00