Mirrors_Framework/PX4-Autopilot
1
0
Fork 0
mirror of https://github.com/PX4/PX4-Autopilot.git synced 2026-05-27 02:06:27 +08:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

Subedit

Browse Source
This commit is contained in:
Hamish Willee
2026-02-12 15:07:31 +11:00
committed by Ramon Roche
parent aecd1461d7
commit ad0b6bdc6b
5 changed files with 20 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/en/dev_setup/building_px4.md
+3 -2
View File
@@ -127,7 +127,8 @@ The following list shows the build commands for the [Pixhawk standard](../flight
- [Pixhawk 1 (FMUv2)](../flight_controller/pixhawk.md): `make px4_fmu-v2_default`
:::warning
You **must** use a supported version of GCC to build this board (e.g. the `gcc-arm-none-eabi` package from the current Ubuntu LTS, which is the same toolchain used by CI) or remove modules from the build. Building with an unsupported GCC may fail, as PX4 is close to the board's 1MB flash limit.
You **must** use a supported version of GCC to build this board (e.g. the `gcc-arm-none-eabi` package from the current Ubuntu LTS, which is the same toolchain used by CI) or remove modules from the build.
Building with an unsupported GCC may fail, as PX4 is close to the board's 1MB flash limit.
:::
- Pixhawk 1 with 2 MB flash: `make px4_fmu-v3_default`
@@ -238,7 +239,7 @@ You may need to install it using:
pip3 install --user jinja2
```
If you have already installed these dependencies this may be because there is more than one Python version on the computer (e.g. Python 2.7.16 Python 3.8.3), and the module is not present in the version used by the build toolchain.
If you have already installed these dependencies this may be because there is more than one Python version on the computer (e.g. Python 2.7.16 and Python 3.8.3), and the module is not present in the version used by the build toolchain.
You should be able to fix this by explicitly installing the dependencies as shown:
docs/en/dev_setup/config_initial.md
+4 -4
View File
@@ -20,7 +20,7 @@ The equipment below is highly recommended:
:::
- Lenovo Thinkpad with i5-core running Windows 11
- MacBook Pro (early 2015 and later) with macOS 10.15 or later
- Lenovo Thinkpad i5 with Ubuntu Linux 20.04 or later
- Lenovo Thinkpad i5 with Ubuntu Linux 22.04 or later
- **Ground control station** (computer or tablet):
- iPad (may require Wifi telemetry adapter)
@@ -39,9 +39,9 @@ Install the [QGroundControl Daily Build](../dev_setup/qgc_daily_build.md) for a
To configure the vehicle:
1. [Install PX4 firmware](../config/firmware.md#installing-px4-main-beta-or-custom-firmware) (including "custom" firmware with your own changes).
1. [Start with the airframe](../config/airframe.md) that best-matches your vehicle from the [airframe reference](../airframes/airframe_reference.md).
1. [Basic Configuration](../config/index.md) explains how to perform basic configuration.
1. [Parameter Configuration](../advanced_config/parameters.md) explains how you can find and modify individual parameters.
2. [Start with the airframe](../config/airframe.md) that best-matches your vehicle from the [airframe reference](../airframes/airframe_reference.md).
3. [Basic Configuration](../config/index.md) explains how to perform basic configuration.
4. [Parameter Configuration](../advanced_config/parameters.md) explains how you can find and modify individual parameters.
::: info
docs/en/dev_setup/dev_env.md
+3 -3
View File
@@ -2,7 +2,7 @@
The _supported platforms_ for PX4 development are:
- [Ubuntu Linux (24.04/22.04)](../dev_setup/dev_env_linux_ubuntu.md) — Recommended
- [Ubuntu Linux (24.04/22.04)](../dev_setup/dev_env_linux_ubuntu.md)
- [Windows (10/11)](../dev_setup/dev_env_windows_wsl.md) — via WSL2
- [macOS](../dev_setup/dev_env_mac.md)
@@ -15,9 +15,9 @@ The table below shows what PX4 targets you can build on each OS.
| **NuttX based hardware:** [Pixhawk Series](../flight_controller/pixhawk_series.md), [Crazyflie](../complete_vehicles_mc/crazyflie2.md) | ✓ | ✓ | ✓ |
| **Linux-based hardware:** [Raspberry Pi 2/3](../flight_controller/raspberry_pi_navio2.md) | ✓ | | |
| **Simulation:** [Gazebo SITL](../sim_gazebo_gz/index.md) | ✓ | ✓ | ✓ |
| **Simulation:** [Gazebo Classic SITL](../sim_gazebo_classic/index.md) | ✓ | ✓ | ✓ |
| **Simulation:** [ROS with Gazebo Classic](../simulation/ros_interface.md) | ✓ | | ✓ |
| **Simulation:** ROS 2 with Gazebo | ✓ | | ✓ |
| **Simulation:** [Gazebo Classic SITL](../sim_gazebo_classic/index.md) | | ✓ | ✓ |
| **Simulation:** [ROS with Gazebo Classic](../simulation/ros_interface.md) | | | ✓ |
Experienced Docker users can also build with the containers used by our continuous integration system: [Docker Containers](../test_and_ci/docker.md)
docs/en/dev_setup/dev_env_windows_wsl.md
+8 -8
View File
@@ -58,20 +58,20 @@ To install WSL2 with Ubuntu on a new installation of Windows 10 or 11:
wsl --install
```
- Ubuntu 20.04 ([Gazebo-Classic Simulation](../sim_gazebo_classic/index.md))
```sh
wsl --install -d Ubuntu-20.04
```
- Ubuntu 22.04 ([Gazebo Simulation](../sim_gazebo_gz/index.md))
```sh
wsl --install -d Ubuntu-22.04
```
- Ubuntu 24.04 ([Gazebo Simulation](../sim_gazebo_gz/index.md))
```sh
wsl --install -d Ubuntu-24.04
```
::: info
You can also install[Ubuntu 20.04](https://www.microsoft.com/store/productId/9MTTCL66CPXJ) and [Ubuntu 22.04](https://www.microsoft.com/store/productId/9PN20MSR04DW) from the store, which allows you to delete the application using the normal Windows Add/Remove settings:
You can also [Ubuntu 24.04](https://www.microsoft.com/store/productId/9nz3klhxdjp5) or [Ubuntu 22.04](https://www.microsoft.com/store/productId/9PN20MSR04DW) from Microsoft Store, which allows you to delete the application using the normal Windows Add/Remove settings.
:::
1. WSL will prompt you for a user name and password for the Ubuntu installation.
@@ -106,7 +106,7 @@ To open a WSL shell using a command prompt:
```
```sh
wsl -d Ubuntu-20.04
wsl -d Ubuntu-24.04
```
If you only have one version of Ubuntu, you can just use `wsl`.
docs/en/ros/mavros_installation.md
+2 -2
View File
@@ -26,7 +26,7 @@ They cover the _ROS Melodic and Noetic_ releases.
::: tab ROS Noetic (Ubuntu 20.04)
If you're working with [ROS Noetic](https://wiki.ros.org/noetic) on Ubuntu 20.04:
If you're working with [ROS "Noetic"](https://wiki.ros.org/noetic) on Ubuntu 20.04:
1. Install PX4 without the simulator toolchain:
1. [Download PX4 Source Code](../dev_setup/building_px4.md):
@@ -57,7 +57,7 @@ If you're working with [ROS Noetic](https://wiki.ros.org/noetic) on Ubuntu 20.04
::: tab ROS Melodic (Ubuntu 18.04)
If you're working with ROS "Melodic on Ubuntu 18.04:
If you're working with ROS "Melodic" on Ubuntu 18.04:
1. Download the [ubuntu_sim_ros_melodic.sh](https://raw.githubusercontent.com/PX4/Devguide/master/build_scripts/ubuntu_sim_ros_melodic.sh) script in a bash shell: