Mirrors_Framework/PX4-Autopilot
1
0
Fork 0
mirror of https://github.com/PX4/PX4-Autopilot.git synced 2026-06-07 17:35:22 +08:00
Code Issues Actions 30 Packages Projects Releases Wiki Activity

Merged origin/master into pubsub_cleanup

Browse Source
This commit is contained in:
Lorenz Meier
2014-02-09 16:04:32 +01:00
parent ac326beaaa f52f15c791
commit 773f70a9df
147 changed files with 5405 additions and 4220 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Documentation/Doxyfile
+1 -1
View File
@@ -599,7 +599,7 @@ RECURSIVE = YES
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
EXCLUDE = ../src/modules/mathlib/CMSIS \
EXCLUDE = ../src/lib/mathlib/CMSIS \
../src/modules/attitude_estimator_ekf/codegen
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil
+8 -50
View File
@@ -1,14 +1,13 @@
#!nsh
#
# USB HIL start
# HILStar / X-Plane
#
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>
#
echo "[HIL] HILStar starting.."
echo "HIL Rascal 110 starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
@@ -40,48 +39,7 @@ then
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set HIL yes
set VEHICLE_TYPE fw
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/10015_tbs_discovery
+21 -64
View File
@@ -1,74 +1,31 @@
#!nsh
echo "[init] Team Blacksheep Discovery Quad"
#
# Load default params for this platform
# Team Blacksheep Discovery Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.006
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.17
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 5.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.15
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.17
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.006
param set MC_YAWPOS_P 0.5
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.2
param save
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set VEHICLE_TYPE mc
set MIXER FMU_quad_w
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load the mixer for a quad with wide arms
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1100
pwm max -c 1234 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400
ROMFS/px4fmu_common/init.d/10016_3dr_iris
+42 -62
View File
@@ -1,73 +1,53 @@
#!nsh
echo "[init] 3DR Iris Quad"
#
# Load default params for this platform
# 3DR Iris Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.13
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 9.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.15
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.13
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 0.5
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
param set BAT_V_SCALING 0.00989
param set BAT_C_SCALING 0.0124
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set VEHICLE_TYPE mc
set MIXER FMU_quad_w
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.0098
set EXIT_ON_END yes
fi
#
# Load the mixer for a quad with wide arms
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1050
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400
set PWM_DISARMED 900
set PWM_MIN 1000
set PWM_MAX 2000
ROMFS/px4fmu_common/init.d/1001_rc_quad.hil
-105
View File
@@ -1,105 +0,0 @@
#!nsh
#
# USB HIL start
#
echo "[HIL] HILS quadrotor starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.0
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.05
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.1
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.05
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.5
param set MPC_THR_MIN 0.1
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 2
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
echo "[HIL] setup done, running"
ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil
+46
View File
@@ -0,0 +1,46 @@
#!nsh
#
# HIL Quadcopter X
#
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
fi
set HIL yes
set VEHICLE_TYPE mc
set MIXER FMU_quad_x
ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil
+11 -45
View File
@@ -1,14 +1,13 @@
#!nsh
#
# USB HIL start
# HIL Rascal 110 (Flightgear)
#
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>
#
echo "[HIL] HILStar starting in state-HIL mode.."
echo "HIL Rascal 110 starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
@@ -32,48 +31,15 @@ then
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set HIL yes
set VEHICLE_TYPE fw
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil
+38 -97
View File
@@ -1,105 +1,46 @@
#!nsh
#
# USB HIL start
# HIL Quadcopter +
#
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
echo "[HIL] HILS quadrotor + starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.0
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.05
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.1
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.05
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.5
param set MPC_THR_MIN 0.1
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
#
# Default parameters for this platform
#
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 2
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
echo "[HIL] setup done, running"
set HIL yes
set VEHICLE_TYPE mc
set MIXER FMU_quad_+
ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
+8 -61
View File
@@ -1,14 +1,13 @@
#!nsh
#
# USB HIL start
# HIL Rascal 110 (Flightgear)
#
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>
#
echo "[HIL] HILStar starting.."
echo "HIL Rascal 110 starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
@@ -40,59 +39,7 @@ then
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
set MODE autostart
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix
else
echo "Using /etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
fi
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set HIL yes
set VEHICLE_TYPE fw
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm
+37
View File
@@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Octo coaxial geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_octo_cox
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/2100_mpx_easystar
+10 -51
View File
@@ -1,13 +1,15 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on EasyStar"
#
# Load default params for this platform
# MPX EasyStar Plane
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: ???
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
#
# Default parameters for this platform
#
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
@@ -31,50 +33,7 @@ then
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_RET.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_RET.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_RET.mix
else
echo "Using /etc/mixers/FMU_RET.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_RET.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_RET
ROMFS/px4fmu_common/init.d/2101_hk_bixler
+4 -44
View File
@@ -1,11 +1,11 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on HK Bixler"
echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
@@ -35,46 +35,6 @@ then
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/2102_3dr_skywalker
+3 -45
View File
@@ -5,7 +5,7 @@ echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
@@ -35,48 +35,6 @@ then
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
pwm disarmed -c 3 -p 1056
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AETR.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AETR.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/3030_io_camflyer
+33 -51
View File
@@ -2,57 +2,39 @@
echo "[init] PX4FMU v1, v2 with or without IO on Camflyer"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_Q
ROMFS/px4fmu_common/init.d/3031_io_phantom
-85
View File
@@ -1,85 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Phantom FPV"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_AIRSPD_MIN 11.4
param set FW_AIRSPD_TRIM 14
param set FW_AIRSPD_MAX 22
param set FW_L1_PERIOD 15
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 45
param set FW_P_LIM_MIN -45
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 15
param set FW_R_P 80
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.8
param set FW_THR_LND_MAX 0
param set FW_THR_MAX 1
param set FW_THR_MIN 0.5
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 2.0
param set FW_Y_ROLLFF 1.0
param set RC_SCALE_ROLL 0.6
param set RC_SCALE_PITCH 0.6
param set TRIM_PITCH 0.1
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
ROMFS/px4fmu_common/init.d/3031_phantom
+44
View File
@@ -0,0 +1,44 @@
#!nsh
#
# Phantom FPV Flying Wing
#
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 11.4
param set FW_AIRSPD_TRIM 14
param set FW_AIRSPD_MAX 22
param set FW_L1_PERIOD 15
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 45
param set FW_P_LIM_MIN -45
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 15
param set FW_R_P 80
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.8
param set FW_THR_LND_MAX 0
param set FW_THR_MAX 1
param set FW_THR_MIN 0.5
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 2.0
param set FW_Y_ROLLFF 1.0
param set RC_SCALE_ROLL 0.6
param set RC_SCALE_PITCH 0.6
param set TRIM_PITCH 0.1
fi
set VEHICLE_TYPE fw
set MIXER FMU_Q
ROMFS/px4fmu_common/init.d/3032_skywalker_x5
+37 -52
View File
@@ -1,58 +1,43 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Skywalker X5"
#
# Load default params for this platform
# Skywalker X5 Flying Wing
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_X5
ROMFS/px4fmu_common/init.d/3033_io_wingwing
-84
View File
@@ -1,84 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on the Wing Wing (aka Z-84)"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
ROMFS/px4fmu_common/init.d/3033_wingwing
+43
View File
@@ -0,0 +1,43 @@
#!nsh
#
# Wing Wing (aka Z-84) Flying Wing
#
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
set VEHICLE_TYPE fw
set MIXER FMU_Q
ROMFS/px4fmu_common/init.d/3034_fx79
+43
View File
@@ -0,0 +1,43 @@
#!nsh
#
# FX-79 Buffalo Flying Wing
#
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set FW_AIRSPD_MAX 20
param set FW_AIRSPD_TRIM 12
param set FW_AIRSPD_MIN 15
param set FW_L1_PERIOD 12
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 80
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.75
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 1.1
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
set VEHICLE_TYPE fw
set MIXER FMU_FX79
ROMFS/px4fmu_common/init.d/3034_io_fx79
-84
View File
@@ -1,84 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on FX-79 Buffalo"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_AIRSPD_MAX 20
param set FW_AIRSPD_TRIM 12
param set FW_AIRSPD_MIN 15
param set FW_L1_PERIOD 12
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 80
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.75
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 1.1
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_FX79.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_FX79.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_FX79.mix
else
echo "Using /etc/mixers/FMU_FX79.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_FX79.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
ROMFS/px4fmu_common/init.d/4010_dji_f330
+29 -47
View File
@@ -1,31 +1,31 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on DJI F330"
#
# Load default params for this platform
# DJI Flame Wheel F330 Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.8
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.05
param set MC_YAWRATE_D 0.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
@@ -38,32 +38,14 @@ then
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
set VEHICLE_TYPE mc
set MIXER FMU_quad_x
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
sh /etc/init.d/rc.mc_interface
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/4011_dji_f450
+27 -64
View File
@@ -1,74 +1,37 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on DJI F450"
#
# Load default params for this platform
# DJI Flame Wheel F450 Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
set VEHICLE_TYPE mc
set MIXER FMU_quad_x
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals (for DJI ESCs)
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1200
pwm max -c 1234 -p 1800
#
# Start common multirotor apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/4012_hk_x550
+33
View File
@@ -0,0 +1,33 @@
#!nsh
#
# HobbyKing X550 Quadcopter
#
# Maintainers: Todd Stellanova <tstellanova@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 5.5
param set MC_ATT_I 0
param set MC_ATT_D 0
param set MC_ATTRATE_P 0.14
param set MC_ATTRATE_I 0
param set MC_ATTRATE_D 0.006
param set MC_YAWPOS_P 0.6
param set MC_YAWPOS_I 0
param set MC_YAWPOS_D 0
param set MC_YAWRATE_P 0.08
param set MC_YAWRATE_I 0
param set MC_YAWRATE_D 0
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_quad_x
set PWM_OUTPUTS 1234
set PWM_RATE 400
ROMFS/px4fmu_common/init.d/40_io_segway
-51
View File
@@ -1,51 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 10 = ground rover
#
param set MAV_TYPE 10
#
# Start MAVLink (depends on orb)
#
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
#
# Start and configure PX4IO interface
#
sh /etc/init.d/rc.io
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator (depends on orb)
#
attitude_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
roboclaw start /dev/ttyS2 128 1200
segway start
ROMFS/px4fmu_common/init.d/5001_quad_+_pwm
+37
View File
@@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Quad + geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_quad_+
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm
+37
View File
@@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Hexa X geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_hexa_x
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/666_fmu_q_x550
-76
View File
@@ -1,76 +0,0 @@
#!nsh
echo "[init] 666_fmu_q_x550: PX4FMU Quad X550 with or without IO"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set MC_ATTRATE_P 0.14
param set MC_ATTRATE_I 0
param set MC_ATTRATE_D 0.006
param set MC_ATT_P 5.5
param set MC_ATT_I 0
param set MC_ATT_D 0
param set MC_YAWPOS_D 0
param set MC_YAWPOS_I 0
param set MC_YAWPOS_P 0.6
param set MC_YAWRATE_D 0
param set MC_YAWRATE_I 0
param set MC_YAWRATE_P 0.08
param set RC_SCALE_PITCH 1
param set RC_SCALE_ROLL 1
param set RC_SCALE_YAW 3
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1100
pwm max -c 1234 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm
+37
View File
@@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Hexa + geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_hexa_+
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/8001_octo_x_pwm
+37
View File
@@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Octo X geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_octo_x
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/800_sdlogger
-51
View File
@@ -1,51 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 init to log only
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param save
fi
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
# Set PWM values for DJI ESCs
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
sh /etc/init.d/rc.sensors
gps start
attitude_estimator_ekf start
position_estimator_inav start
if [ -d /fs/microsd ]
then
if [ $BOARD == fmuv1 ]
then
sdlog2 start -r 50 -e -b 16
else
sdlog2 start -r 200 -e -b 16
fi
fi
ROMFS/px4fmu_common/init.d/9001_octo_+_pwm
+37
View File
@@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Octo + geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_octo_+
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/cmp_test
-9
View File
@@ -1,9 +0,0 @@
#!nsh
cp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded
if cmp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded
then
echo "CMP returned true"
else
echo "CMP returned false"
fi
ROMFS/px4fmu_common/init.d/rc.autostart
+195
View File
@@ -0,0 +1,195 @@
#
# Check if auto-setup from one of the standard scripts is wanted
# SYS_AUTOSTART = 0 means no autostart (default)
#
# AUTOSTART PARTITION:
# 0 .. 999 Reserved (historical)
# 1000 .. 1999 Simulation setups
# 2000 .. 2999 Standard planes
# 3000 .. 3999 Flying wing
# 4000 .. 4999 Quad X
# 5000 .. 5999 Quad +
# 6000 .. 6999 Hexa X
# 7000 .. 7999 Hexa +
# 8000 .. 8999 Octo X
# 9000 .. 9999 Octo +
# 10000 .. 10999 Wide arm / H frame
# 11000 .. 11999 Hexa Cox
# 12000 .. 12999 Octo Cox
#
# Simulation setups
#
if param compare SYS_AUTOSTART 1000
then
sh /etc/init.d/1000_rc_fw_easystar.hil
fi
if param compare SYS_AUTOSTART 1001
then
sh /etc/init.d/1001_rc_quad_x.hil
fi
if param compare SYS_AUTOSTART 1002
then
sh /etc/init.d/1002_rc_fw_state.hil
fi
if param compare SYS_AUTOSTART 1003
then
sh /etc/init.d/1003_rc_quad_+.hil
fi
if param compare SYS_AUTOSTART 1004
then
sh /etc/init.d/1004_rc_fw_Rascal110.hil
fi
#
# Standard plane
#
if param compare SYS_AUTOSTART 2100 100
then
sh /etc/init.d/2100_mpx_easystar
set MODE custom
fi
if param compare SYS_AUTOSTART 2101 101
then
sh /etc/init.d/2101_hk_bixler
set MODE custom
fi
if param compare SYS_AUTOSTART 2102 102
then
sh /etc/init.d/2102_3dr_skywalker
set MODE custom
fi
#
# Flying wing
#
if param compare SYS_AUTOSTART 3030 30
then
sh /etc/init.d/3030_io_camflyer
fi
if param compare SYS_AUTOSTART 3031 31
then
sh /etc/init.d/3031_phantom
fi
if param compare SYS_AUTOSTART 3032 32
then
sh /etc/init.d/3032_skywalker_x5
fi
if param compare SYS_AUTOSTART 3033 33
then
sh /etc/init.d/3033_wingwing
fi
if param compare SYS_AUTOSTART 3034 34
then
sh /etc/init.d/3034_fx79
fi
#
# Quad X
#
if param compare SYS_AUTOSTART 4008 8
then
#sh /etc/init.d/4008_ardrone
fi
if param compare SYS_AUTOSTART 4009 9
then
#sh /etc/init.d/4009_ardrone_flow
fi
if param compare SYS_AUTOSTART 4010 10
then
sh /etc/init.d/4010_dji_f330
fi
if param compare SYS_AUTOSTART 4011 11
then
sh /etc/init.d/4011_dji_f450
fi
if param compare SYS_AUTOSTART 4012 12
then
sh /etc/init.d/4012_hk_x550
fi
#
# Quad +
#
if param compare SYS_AUTOSTART 5001
then
sh /etc/init.d/5001_quad_+_pwm
fi
#
# Hexa X
#
if param compare SYS_AUTOSTART 6001
then
sh /etc/init.d/6001_hexa_x_pwm
fi
#
# Hexa +
#
if param compare SYS_AUTOSTART 7001
then
sh /etc/init.d/7001_hexa_+_pwm
fi
#
# Octo X
#
if param compare SYS_AUTOSTART 8001
then
sh /etc/init.d/8001_octo_x_pwm
fi
#
# Octo +
#
if param compare SYS_AUTOSTART 9001
then
sh /etc/init.d/9001_octo_+_pwm
fi
#
# Wide arm / H frame
#
if param compare SYS_AUTOSTART 10015 15
then
sh /etc/init.d/10015_tbs_discovery
fi
if param compare SYS_AUTOSTART 10016 16
then
sh /etc/init.d/10016_3dr_iris
fi
#
# Octo Coaxial
#
if param compare SYS_AUTOSTART 12001
then
sh /etc/init.d/12001_octo_cox_pwm
fi
ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl
-113
View File
@@ -1,113 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.002
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.09
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 6.8
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start the Mikrokopter ESC driver
#
if [ $MKBLCTRL_MODE == yes ]
then
if [ $MKBLCTRL_FRAME == x ]
then
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing"
mkblctrl -mkmode x
else
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing"
mkblctrl -mkmode +
fi
else
if [ $MKBLCTRL_FRAME == x ]
then
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame"
else
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame"
fi
mkblctrl
fi
usleep 10000
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
if [ $MKBLCTRL_FRAME == x ]
then
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_x.mix
else
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_+.mix
fi
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/rc.custom_io_esc
-120
View File
@@ -1,120 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.002
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.09
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 6.8
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
echo "RC script for PX4FMU + PX4IO + PPM-ESCs running"
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
usleep 10000
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
sh /etc/init.d/rc.io
else
fmu mode_pwm
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
if [ $ESC_MAKER = afro ]
then
# Set PWM values for Afro ESCs
pwm disarmed -c 1234 -p 1050
pwm min -c 1234 -p 1080
pwm max -c 1234 -p 1860
else
# Set PWM values for typical ESCs
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 980
pwm max -c 1234 -p 1800
fi
#
# Load mixer
#
if [ $FRAME_GEOMETRY == x ]
then
echo "Frame geometry X"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
else
if [ $FRAME_GEOMETRY == w ]
then
echo "Frame geometry W"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
else
echo "Frame geometry +"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
fi
fi
#
# Set PWM output frequency
#
pwm rate -r 400 -c 1234
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
echo "Script end"
ROMFS/px4fmu_common/init.d/rc.fixedwing
-34
View File
@@ -1,34 +0,0 @@
#!nsh
#
# Standard everything needed for fixedwing except mixer, actuator output and mavlink
#
#
# Start the sensors and test them.
#
sh /etc/init.d/rc.sensors
#
# Start logging (depends on sensors)
#
sh /etc/init.d/rc.logging
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude and position estimator
#
att_pos_estimator_ekf start
#
# Start attitude controller
#
fw_att_control start
#
# Start the position controller
#
fw_pos_control_l1 start
ROMFS/px4fmu_common/init.d/rc.fw_apps
+19
View File
@@ -0,0 +1,19 @@
#!nsh
#
# Standard apps for fixed wing
#
#
# Start the attitude and position estimator
#
att_pos_estimator_ekf start
#
# Start attitude controller
#
fw_att_control start
#
# Start the position controller
#
fw_pos_control_l1 start
ROMFS/px4fmu_common/init.d/rc.hexa
-94
View File
@@ -1,94 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Hex"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/
# 13 = hexarotor
#
param set MAV_TYPE 13
set EXIT_ON_END no
#
# Start and configure PX4IO interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# This is not possible on a hexa
tone_alarm error
fi
#
# Load mixer
#
mixer load /dev/pwm_output $MIXER
#
# Set PWM output frequency to 400 Hz
#
pwm rate -a -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 123456 -p 900
pwm min -c 123456 -p 1100
pwm max -c 123456 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/rc.interface
+72
View File
@@ -0,0 +1,72 @@
#!nsh
#
# Script to configure control interface
#
if [ $MIXER != none ]
then
#
# Load mixer
#
set MIXERSD /fs/microsd/etc/mixers/$MIXER.mix
#Use the mixer file from the SD-card if it exists
if [ -f $MIXERSD ]
then
set MIXER_FILE $MIXERSD
else
set MIXER_FILE /etc/mixers/$MIXER.mix
fi
if [ $OUTPUT_MODE == mkblctrl ]
then
set OUTPUT_DEV /dev/mkblctrl
else
set OUTPUT_DEV /dev/pwm_output
fi
if mixer load $OUTPUT_DEV $MIXER_FILE
then
echo "[init] Mixer loaded: $MIXER_FILE"
else
echo "[init] Error loading mixer: $MIXER_FILE"
tone_alarm $TUNE_OUT_ERROR
fi
else
echo "[init] Mixer not defined"
tone_alarm $TUNE_OUT_ERROR
fi
if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == io ]
then
if [ $PWM_OUTPUTS != none ]
then
#
# Set PWM output frequency
#
if [ $PWM_RATE != none ]
then
echo "[init] Set PWM rate: $PWM_RATE"
pwm rate -c $PWM_OUTPUTS -r $PWM_RATE
fi
#
# Set disarmed, min and max PWM values
#
if [ $PWM_DISARMED != none ]
then
echo "[init] Set PWM disarmed: $PWM_DISARMED"
pwm disarmed -c $PWM_OUTPUTS -p $PWM_DISARMED
fi
if [ $PWM_MIN != none ]
then
echo "[init] Set PWM min: $PWM_MIN"
pwm min -c $PWM_OUTPUTS -p $PWM_MIN
fi
if [ $PWM_MAX != none ]
then
echo "[init] Set PWM max: $PWM_MAX"
pwm max -c $PWM_OUTPUTS -p $PWM_MAX
fi
fi
fi
ROMFS/px4fmu_common/init.d/rc.io
+17 -19
View File
@@ -1,23 +1,21 @@
#
# Start PX4IO interface (depends on orb, commander)
# Init PX4IO interface
#
if px4io start
then
#
# Allow PX4IO to recover from midair restarts.
# this is very unlikely, but quite safe and robust.
px4io recovery
#
# Disable px4io topic limiting
#
if [ $BOARD == fmuv1 ]
then
px4io limit 200
else
px4io limit 400
fi
else
# SOS
tone_alarm error
#
# Allow PX4IO to recover from midair restarts.
# this is very unlikely, but quite safe and robust.
#
px4io recovery
#
# Adjust PX4IO update rate limit
#
set PX4IO_LIMIT 400
if hw_ver compare PX4FMU_V1
then
set PX4IO_LIMIT 200
fi
echo "[init] Set PX4IO update rate limit: $PX4IO_LIMIT Hz"
px4io limit $PX4IO_LIMIT
ROMFS/px4fmu_common/init.d/rc.logging
+4 -4
View File
@@ -1,14 +1,14 @@
#!nsh
#
# Initialise logging services.
# Initialize logging services.
#
if [ -d /fs/microsd ]
then
if [ $BOARD == fmuv1 ]
if hw_ver compare PX4FMU_V1
then
sdlog2 start -r 50 -a -b 16
sdlog2 start -r 50 -a -b 16 -t
else
sdlog2 start -r 200 -a -b 16
sdlog2 start -r 200 -a -b 16 -t
fi
fi
ROMFS/px4fmu_common/init.d/rc.mc_apps
+24
View File
@@ -0,0 +1,24 @@
#!nsh
#
# Standard apps for multirotors
#
#
# Start the attitude estimator
#
attitude_estimator_ekf start
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
ROMFS/px4fmu_common/init.d/rc.mc_interface
-49
View File
@@ -1,49 +0,0 @@
#!nsh
#
# Script to set PWM min / max limits and mixer
#
#
# Load mixer
#
if [ $FRAME_GEOMETRY == x ]
then
echo "Frame geometry X"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
else
if [ $FRAME_GEOMETRY == w ]
then
echo "Frame geometry W"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
else
echo "Frame geometry +"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
fi
fi
if [ $FRAME_COUNT == 4 ]
then
set OUTPUTS 1234
param set MAV_TYPE 2
else
if [ $FRAME_COUNT == 6 ]
then
set OUTPUTS 123456
param set MAV_TYPE 13
else
set OUTPUTS 12345678
fi
fi
#
# Set PWM output frequency
#
pwm rate -c $OUTPUTS -r $PWM_RATE
#
# Set disarmed, min and max PWM signals (for DJI ESCs)
#
pwm disarmed -c $OUTPUTS -p $PWM_DISARMED
pwm min -c $OUTPUTS -p $PWM_MIN
pwm max -c $OUTPUTS -p $PWM_MAX
ROMFS/px4fmu_common/init.d/rc.multirotor
-39
View File
@@ -1,39 +0,0 @@
#!nsh
#
# Standard everything needed for multirotors except mixer, actuator output and mavlink
#
#
# Start the sensors and test them.
#
sh /etc/init.d/rc.sensors
#
# Start logging (depends on sensors)
#
sh /etc/init.d/rc.logging
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator
#
attitude_estimator_ekf start
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
ROMFS/px4fmu_common/init.d/rc.octo
-94
View File
@@ -1,94 +0,0 @@
#!nsh
echo "[init] Octorotor startup"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/
# 14 = octorotor
#
param set MAV_TYPE 14
set EXIT_ON_END no
#
# Start and configure PX4IO interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# This is not possible on an octo
tone_alarm error
fi
#
# Load mixer
#
mixer load /dev/pwm_output $MIXER
#
# Set PWM output frequency to 400 Hz
#
pwm rate -a -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 12345678 -p 900
pwm min -c 12345678 -p 1100
pwm max -c 12345678 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/rc.sensors
+12 -11
View File
@@ -10,41 +10,42 @@
ms5611 start
adc start
# mag might be external
# Mag might be external
if hmc5883 start
then
echo "using HMC5883"
echo "[init] Using HMC5883"
fi
if mpu6000 start
then
echo "using MPU6000"
echo "[init] Using MPU6000"
fi
if l3gd20 start
then
echo "using L3GD20(H)"
echo "[init] Using L3GD20(H)"
fi
if lsm303d start
if hw_ver compare PX4FMU_V2
then
set BOARD fmuv2
else
set BOARD fmuv1
if lsm303d start
then
echo "[init] Using LSM303D"
fi
fi
# Start airspeed sensors
if meas_airspeed start
then
echo "using MEAS airspeed sensor"
echo "[init] Using MEAS airspeed sensor"
else
if ets_airspeed start
then
echo "using ETS airspeed sensor (bus 3)"
echo "[init] Using ETS airspeed sensor (bus 3)"
else
if ets_airspeed start -b 1
then
echo "Using ETS airspeed sensor (bus 1)"
echo "[init] Using ETS airspeed sensor (bus 1)"
fi
fi
fi
ROMFS/px4fmu_common/init.d/rc.standalone
-13
View File
@@ -1,13 +0,0 @@
#!nsh
#
# Flight startup script for PX4FMU standalone configuration.
#
echo "[init] doing standalone PX4FMU startup..."
#
# Start the ORB
#
uorb start
echo "[init] startup done"
ROMFS/px4fmu_common/init.d/rc.usb
-33
View File
@@ -36,39 +36,6 @@ then
echo "Commander started"
fi
# Start px4io if present
if px4io start
then
echo "PX4IO driver started"
else
if fmu mode_serial
then
echo "FMU driver started"
fi
fi
# Start sensors
sh /etc/init.d/rc.sensors
# Start one of the estimators
if attitude_estimator_ekf status
then
echo "multicopter att filter running"
else
if att_pos_estimator_ekf status
then
echo "fixedwing att filter running"
else
attitude_estimator_ekf start
fi
fi
# Start GPS
if gps start
then
echo "GPS started"
fi
echo "MAVLink started, exiting shell.."
# Exit shell to make it available to MAVLink
ROMFS/px4fmu_common/init.d/rcS
+412 -356
View File
File diff suppressed because it is too large Load Diff

Some files were not shown because too many files have changed in this diff Show More