mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-06-07 09:13:32 +08:00
Add SSD1783 LCD driver for C155 phone
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4981 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo
+4
-2
@@ -3074,5 +3074,7 @@
|
||||
for the PGA117 on the Mirtoo module.
|
||||
* drivers/analog/pga11x.c and include/nuttx/analog/pga11x.h: These belong in
|
||||
the analog subdirectories, not input.
|
||||
|
||||
|
||||
* configs/compal_e99/src/ssd1783.c and /ssd1783.h: Drivers for the SSD1783
|
||||
LCD found in the Motorola C155 telephone. The driver is specific to the C155
|
||||
because it uses the uwire transport. Contributed by Denis Carilki and
|
||||
Alan Carvalho de Assis.
|
||||
|
||||
@@ -40,5 +40,10 @@ CONFIGURED_APPS += nshlib
|
||||
|
||||
|
||||
# Path to example in apps/examples
|
||||
CONFIGURED_APPS += examples/hello
|
||||
#CONFIGURED_APPS += examples/hello #fails not finding hello_main despite of good config
|
||||
CONFIGURED_APPS += vsn/poweroff
|
||||
CONFIGURED_APPS += examples/ostest
|
||||
CONFIGURED_APPS += examples/nxtext
|
||||
CONFIGURED_APPS += examples/nxhello
|
||||
CONFIGURED_APPS += examples/nxlines
|
||||
CONFIGURED_APPS += examples/nximage
|
||||
|
||||
@@ -207,6 +207,7 @@ CONFIG_HAVE_LIBM=n
|
||||
#
|
||||
#CONFIG_APPS_DIR=
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_GRAPHICS=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
@@ -434,6 +435,49 @@ CONFIG_NSH_BUILTIN_APPS=y
|
||||
#
|
||||
# Settings for examples/hello
|
||||
CONFIG_EXAMPLES_HELLO_BUILTIN=y
|
||||
CONFIG_EXAMPLES_NXHELLO_BUILTIN=y
|
||||
CONFIG_EXAMPLES_NXTEXT_BUILTIN=y
|
||||
CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y
|
||||
CONFIG_EXAMPLES_NXLINES_BUILTIN=y
|
||||
|
||||
CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=2
|
||||
CONFIG_EXAMPLES_NXLINES_LINEWIDTH=4
|
||||
|
||||
CONFIG_EXAMPLES_NXTEXT_NOGETRUN=y
|
||||
CONFIG_EXAMPLES_NXTEXT_BPP=16
|
||||
CONFIG_EXAMPLES_NXTEXT_BGFONTID=14
|
||||
CONFIG_EXAMPLES_NXHELLO_BPP=16
|
||||
CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=y
|
||||
CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=y
|
||||
#CONFIG_EXAMPLES_NXLINES_EXTERNINIT=y
|
||||
#CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=y
|
||||
#CONFIG_EXAMPLES_NXTEXT_EXTERNINIT=y
|
||||
#CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=y
|
||||
|
||||
# LCD Drivers settings
|
||||
CONFIG_NX_LCDDRIVER=y
|
||||
CONFIG_LCD_SSD1783=y
|
||||
|
||||
#
|
||||
# Graphics
|
||||
CONFIG_NX=y
|
||||
CONFIG_NXCONSOLE=n
|
||||
CONFIG_NX_KBD=y
|
||||
CONFIG_LCD_MAXPOWER=1
|
||||
CONFIG_NX_BLOCKING=y
|
||||
CONFIG_NX_DISABLE_1BPP=y
|
||||
CONFIG_NX_DISABLE_2BPP=y
|
||||
CONFIG_NX_DISABLE_4BPP=y
|
||||
CONFIG_NX_DISABLE_8BPP=y
|
||||
CONFIG_NX_DISABLE_16BPP=n
|
||||
CONFIG_NX_DISABLE_24BPP=y
|
||||
CONFIG_NX_DISABLE_32BPP=y
|
||||
CONFIG_NXCONSOLE_BPP=16
|
||||
CONFIG_NXCONSOLE_NOGETRUN=y
|
||||
CONFIG_NXFONT_SANS17X22=y
|
||||
CONFIG_NX_MULTIUSER=n
|
||||
CONFIG_EXAMPLES_NXTEXT_BPP=16
|
||||
CONFIG_EXAMPLES_NXTEXT_DEVNO=0
|
||||
|
||||
#
|
||||
# Settings for examples/wget
|
||||
|
||||
@@ -14,9 +14,9 @@ MEMORY
|
||||
/* 0x800000-0xa00000 */
|
||||
/* compal-loaded binary: our text, initialized data */
|
||||
LRAM (rw) : ORIGIN = 0x00800000, LENGTH = 0x00020000
|
||||
TRAM (rw) : ORIGIN = 0x00820000, LENGTH = 0x00019000
|
||||
TRAM (rw) : ORIGIN = 0x00820000, LENGTH = 0x0001d000
|
||||
/* compal-loaded binary: our unitialized data, stacks, heap */
|
||||
IRAM (rw) : ORIGIN = 0x00839000, LENGTH = 0x00006000
|
||||
IRAM (rw) : ORIGIN = 0x0083d000, LENGTH = 0x00002000
|
||||
}
|
||||
SECTIONS
|
||||
{
|
||||
|
||||
@@ -42,7 +42,7 @@ CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
CSRCS = dummy.c
|
||||
CSRCS = dummy.c ssd1783.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,110 @@
|
||||
#ifndef SSD1783_H_
|
||||
#define SSD1783_H_
|
||||
|
||||
#include <nuttx/lcd/lcd.h>
|
||||
|
||||
#define FB_COLOR_TO_R(v) (((v)>>16) & 0xff)
|
||||
#define FB_COLOR_TO_G(v) (((v)>> 8) & 0xff)
|
||||
#define FB_COLOR_TO_B(v) ( (v) & 0xff)
|
||||
|
||||
#define SSD1783_UWIRE_BITLEN 9
|
||||
#define SSD1783_DEV_ID 0
|
||||
|
||||
#define ARMIO_LATCH_OUT 0xfffe4802
|
||||
#define IO_CNTL_REG 0xfffe4804
|
||||
#define ASIC_CONF_REG 0xfffef008
|
||||
|
||||
#define ASCONF_PWL_ENA (1 << 4)
|
||||
|
||||
/* begin backlight.c */
|
||||
#define BASE_ADDR_PWL 0xfffe8000
|
||||
#define PWL_REG(m) (BASE_ADDR_PWL + (m))
|
||||
|
||||
enum pwl_reg {
|
||||
PWL_LEVEL = 0,
|
||||
PWL_CTRL = 1,
|
||||
};
|
||||
|
||||
enum ssd1783_cmdflag { CMD, DATA, END };
|
||||
|
||||
struct ssd1783_cmdlist {
|
||||
enum ssd1783_cmdflag is_cmd:8; /* 1: is a command, 0: is data, 2: end marker! */
|
||||
uint8_t data; /* 8 bit to send to LC display */
|
||||
} __attribute__((packed));
|
||||
|
||||
static const struct ssd1783_cmdlist nop[] = {
|
||||
{ CMD, 0x25 }, // NOP command
|
||||
{ END, 0x00 }
|
||||
};
|
||||
|
||||
static const struct ssd1783_cmdlist
|
||||
ssd1783_initdata[] = {
|
||||
{ CMD, 0xD1 }, /* CMD set internal oscillator on */
|
||||
{ CMD, 0x94 }, /* CMD leave sleep mode */
|
||||
{ CMD, 0xbb }, /* CMD Set COM Output Scan Direction: */
|
||||
{ DATA, 0x01 }, /* DATA: 01: COM0-79, then COM159-80 */
|
||||
/* -------- DIFFERENT FROM ORIGINAL CODE: -------------- */
|
||||
/* we use 8bit per pixel packed RGB 332 */
|
||||
{ CMD, 0xbc }, /* CMD Set Data Output Scan Direction */
|
||||
{ DATA, 0x00 }, /* DATA: column scan, normal rotation, normal display */
|
||||
{ DATA, 0x00 }, /* DATA: RGB color arrangement R G B R G B ... */
|
||||
/*-->*/ { DATA, 0x01 }, /* DATA: 8 bit per pixel mode MSB <RRRGGGBB> LSB */
|
||||
/* --------- /DIFFERENT ---------- */
|
||||
{ CMD, 0xce }, /* CMD Set 256 Color Look Up Table LUT */
|
||||
{ DATA, 0x00 }, /* DATA red 000 */
|
||||
{ DATA, 0x03 }, /* DATA red 001 */
|
||||
{ DATA, 0x05 }, /* DATA red 010 */
|
||||
{ DATA, 0x07 }, /* DATA red 011 */
|
||||
{ DATA, 0x09 }, /* DATA red 100 */
|
||||
{ DATA, 0x0b }, /* DATA red 101 */
|
||||
{ DATA, 0x0d }, /* DATA red 110 */
|
||||
{ DATA, 0x0f }, /* DATA red 111 */
|
||||
{ DATA, 0x00 }, /* DATA green 000 */
|
||||
{ DATA, 0x03 }, /* DATA green 001 */
|
||||
{ DATA, 0x05 }, /* DATA green 010 */
|
||||
{ DATA, 0x07 }, /* DATA green 011 */
|
||||
{ DATA, 0x09 }, /* DATA green 100 */
|
||||
{ DATA, 0x0b }, /* DATA green 101 */
|
||||
{ DATA, 0x0d }, /* DATA green 110 */
|
||||
{ DATA, 0x0f }, /* DATA green 111 */
|
||||
{ DATA, 0x00 }, /* DATA blue 00 */
|
||||
{ DATA, 0x05 }, /* DATA blue 01 */
|
||||
{ DATA, 0x0a }, /* DATA blue 10 */
|
||||
{ DATA, 0x0f }, /* DATA blue 11 */
|
||||
{ CMD, 0xca }, /* CMD Set Display Control - Driver Duty Selection */
|
||||
{ DATA, 0xff }, // can't find description of the values in the original
|
||||
{ DATA, 0x10 }, // display/ssd1783.c in my datasheet :-(
|
||||
{ DATA, 0x01 }, //
|
||||
{ CMD, 0xab }, /* CMD Set Scroll Start */
|
||||
{ DATA, 0x00 }, /* DATA: Starting address at block 0 */
|
||||
{ CMD, 0x20 }, /* CMD Set power control register */
|
||||
{ DATA, 0x0b }, /* DATA: booster 6x, reference gen. & int regulator */
|
||||
{ CMD, 0x81 }, /* CMD Contrast Lvl & Int. Regul. Resistor Ratio */
|
||||
{ DATA, 0x29 }, /* DATA: contrast = 0x29 */
|
||||
{ DATA, 0x05 }, /* DATA: 0x05 = 0b101 -> 1+R2/R1 = 11.37 */
|
||||
{ CMD, 0xa7 }, /* CMD Invert Display */
|
||||
{ CMD, 0x82 }, /* CMD Set Temperature Compensation Coefficient */
|
||||
{ DATA, 0x00 }, /* DATA: Gradient is -0.10 % / degC */
|
||||
{ CMD, 0xfb }, /* CMD Set Biasing Ratio */
|
||||
{ DATA, 0x03 }, /* DATA: 1/10 bias */
|
||||
{ CMD, 0xf2 }, /* CMD Set Frame Frequency and N-line inversion */
|
||||
{ DATA, 0x08 }, /* DATA: 75 Hz (POR) */
|
||||
{ DATA, 0x06 }, /* DATA: n-line inversion: 6 lines */
|
||||
{ CMD, 0xf7 }, /* CMD Select PWM/FRC Select Full Col./8col mode */
|
||||
{ DATA, 0x28 }, /* DATA: always 0x28 */
|
||||
{ DATA, 0x8c }, /* DATA: 4bit PWM + 2 bit FRC */
|
||||
{ DATA, 0x05 }, /* DATA: full color mode */
|
||||
{ CMD, 0xaf }, /* CMD Display On */
|
||||
{ END, 0x00 }, /* MARKER: end of list */
|
||||
};
|
||||
|
||||
struct ssd1783_dev_s
|
||||
{
|
||||
/* Publicly visible device structure */
|
||||
struct lcd_dev_s dev;
|
||||
|
||||
/* Private LCD-specific information follows */
|
||||
uint8_t power; /* Current power setting */
|
||||
};
|
||||
|
||||
#endif /* SSD1783_H_ */
|
||||
@@ -60,8 +60,11 @@ export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin"
|
||||
|
||||
# This the Cygwin path to the location where I installed the Pinguino
|
||||
# toolchain under Windows. You will have to edit this if you install the
|
||||
# tool chain in a different location or use a different version
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/PinguinoX.3/win32/p32/bin"
|
||||
# tool chain in a different location or use a different version. /bin
|
||||
# needs to precede the tool path or otherwise you will get
|
||||
# /cygdrive/c/PinguinoX.3/win32/p32/bin/make which does not like POSIX
|
||||
# style paths.
|
||||
#export TOOLCHAIN_BIN="/bin:/cygdrive/c/PinguinoX.3/win32/p32/bin"
|
||||
|
||||
# This the Linux path to the location where I installed the microchipOpen
|
||||
# toolchain under Linux. You will have to edit this if you use the
|
||||
|
||||
@@ -60,8 +60,11 @@ export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin"
|
||||
|
||||
# This the Cygwin path to the location where I installed the Pinguino
|
||||
# toolchain under Windows. You will have to edit this if you install the
|
||||
# tool chain in a different location or use a different version
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/PinguinoX.3/win32/p32/bin"
|
||||
# tool chain in a different location or use a different version. /bin
|
||||
# needs to precede the tool path or otherwise you will get
|
||||
# /cygdrive/c/PinguinoX.3/win32/p32/bin/make which does not like POSIX
|
||||
# style paths.
|
||||
#export TOOLCHAIN_BIN="/bin:/cygdrive/c/PinguinoX.3/win32/p32/bin"
|
||||
|
||||
# This the Linux path to the location where I installed the microchipOpen
|
||||
# toolchain under Linux. You will have to edit this if you use the
|
||||
|
||||
@@ -60,8 +60,11 @@ export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin"
|
||||
|
||||
# This the Cygwin path to the location where I installed the Pinguino
|
||||
# toolchain under Windows. You will have to edit this if you install the
|
||||
# tool chain in a different location or use a different version
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/PinguinoX.3/win32/p32/bin"
|
||||
# tool chain in a different location or use a different version. /bin
|
||||
# needs to precede the tool path or otherwise you will get
|
||||
# /cygdrive/c/PinguinoX.3/win32/p32/bin/make which does not like POSIX
|
||||
# style paths.
|
||||
#export TOOLCHAIN_BIN="/bin:/cygdrive/c/PinguinoX.3/win32/p32/bin"
|
||||
|
||||
# This the Linux path to the location where I installed the microchipOpen
|
||||
# toolchain under Linux. You will have to edit this if you use the
|
||||
|
||||
@@ -1,8 +1,11 @@
|
||||
Contents
|
||||
========
|
||||
nuttx/drivers/lcd README
|
||||
========================
|
||||
|
||||
This is the README.txt file for the drivers/lcd/ directory.
|
||||
|
||||
Contents
|
||||
========
|
||||
|
||||
- LCD Header files
|
||||
include/nuttx/lcd/lcd.h
|
||||
struct lcd_dev_s
|
||||
@@ -80,13 +83,17 @@ Binding LCD Drivers
|
||||
1. Get an instance of struct lcd_dev_s from the hardware-specific LCD
|
||||
device driver, and
|
||||
2. Provide that instance to the initialization method of the higher
|
||||
level device driver.
|
||||
level device driver.
|
||||
|
||||
Examples: /drivers/lcd/
|
||||
=======================
|
||||
|
||||
Re-usable LCD drivers reside in the drivers/lcd directory:
|
||||
|
||||
mio283qt2.c. This is a driver for the MI0283QT-2 LCD from Multi-Inno
|
||||
Technology Co., Ltd. This LCD is based on the Himax HX8347-D LCD
|
||||
controller.
|
||||
|
||||
nokia6100.c. Supports the Nokia 6100 display with either the Philips
|
||||
PCF883 or the Epson S1D15G10 display controller. This LCD is used
|
||||
with the Olimex LPC1766-STK (but has not been fully integrated).
|
||||
@@ -94,7 +101,12 @@ Re-usable LCD drivers reside in the drivers/lcd directory:
|
||||
p14201.c. Driver for RiT P14201 series display with SD1329 IC
|
||||
controller. This OLED is used with older versions of the
|
||||
TI/Luminary LM3S8962 Evaluation Kit.
|
||||
|
||||
|
||||
ssd12989.c. Generic LCD driver for LCDs based on the Solomon Systech
|
||||
SSD1289 LCD controller. Think of this as a template for an LCD driver
|
||||
that you will proably ahve to customize for any particular LCD
|
||||
hardware. (see also configs/hymini-stm32v/src/ssd1289.c below).
|
||||
|
||||
ug-9664hswag01.c. OLED Display Module, UG-9664HSWAG01", Univision
|
||||
Technology Inc. Used with the LPC Xpresso and Embedded Artists
|
||||
base board.
|
||||
@@ -107,18 +119,31 @@ that support additional LCDs. LCD drivers in the configuration directory
|
||||
if they support some differ LCD interface (such as a parallel interface)
|
||||
that makes then less re-usable:
|
||||
|
||||
configs/sam3u-ek/src/up_lcd.c.
|
||||
configs/compal_e99/src/ssd1783.c
|
||||
|
||||
configs/hymini-stm32v/src/ssd1289.c.
|
||||
SSD1783
|
||||
|
||||
configs/hymini-stm32v/src/ssd1289.c. See also drivers/lcd/ssd1298.c
|
||||
above.
|
||||
|
||||
SSD1289
|
||||
|
||||
|
||||
configs/kwikstik-k40/src/up_lcd.c. Don't waste your time. This is
|
||||
just a stub.
|
||||
|
||||
configs/olimex-lpc1766stk/src/up_lcd.c. This examples is the
|
||||
bottom half for the SSD1289 driver at drivers/lcd/nokia6100.c.
|
||||
This was never completedly debugged ... there are probably issues
|
||||
with that nasty 9-bit SPI interfaces.
|
||||
|
||||
configs/sam3u-ek/src/up_lcd.c
|
||||
|
||||
The SAM3U-EK developement board features a TFT/Transmissive color
|
||||
LCD module with touch-screen, FTM280C12D, with integrated driver IC
|
||||
HX8346.
|
||||
|
||||
configs/skp16c26/src/up_lcd.c. Untested alphanumeric LCD driver.
|
||||
|
||||
configs/stm3210e-eval/src/up_lcd.c
|
||||
|
||||
This driver supports the following LCDs:
|
||||
@@ -126,8 +151,13 @@ configs/sam3u-ek/src/up_lcd.c.
|
||||
1. Ampire AM-240320LTNQW00H
|
||||
2. Orise Tech SPFD5408B
|
||||
3. RenesasSP R61580
|
||||
|
||||
configs/skp16c26/src/up_lcd.c. Untest alphanumeric LCD driver.
|
||||
|
||||
configs/stm3220g-eval/src/up_lcd.c and configs/stm3240g-eval/src/up_lcd.c.
|
||||
AM-240320L8TNQW00H (LCD_ILI9320 or LCD_ILI9321) and
|
||||
AM-240320D5TOQW01H (LCD_ILI9325)
|
||||
|
||||
configs/stm32f4discovery/src/up_ssd1289.c. This examples is the
|
||||
bottom half for the SSD1289 driver at drivers/lcd/ssd1289.c
|
||||
|
||||
graphics/
|
||||
=========
|
||||
|
||||
Reference in New Issue
Block a user