Mirrors_Framework/FreeRTOS
1
0
Fork 0
mirror of https://github.com/FreeRTOS/FreeRTOS.git synced 2026-09-22 19:24:10 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add ARMv8M demo project for NXP LPC55S69.

Browse Source
This commit is contained in:
Gaurav Aggarwal
2019-05-05 02:15:55 +00:00
parent ae448fc952
commit 2279a86566
70 changed files with 66420 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/arm_common_tables.h
+121
View File
@@ -0,0 +1,121 @@
/* ----------------------------------------------------------------------
* Project: CMSIS DSP Library
* Title: arm_common_tables.h
* Description: Extern declaration for common tables
*
* $Date: 27. January 2017
* $Revision: V.1.5.1
*
* Target Processor: Cortex-M cores
* -------------------------------------------------------------------- */
/*
* Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _ARM_COMMON_TABLES_H
#define _ARM_COMMON_TABLES_H
#include "arm_math.h"
extern const uint16_t armBitRevTable[1024];
extern const q15_t armRecipTableQ15[64];
extern const q31_t armRecipTableQ31[64];
extern const float32_t twiddleCoef_16[32];
extern const float32_t twiddleCoef_32[64];
extern const float32_t twiddleCoef_64[128];
extern const float32_t twiddleCoef_128[256];
extern const float32_t twiddleCoef_256[512];
extern const float32_t twiddleCoef_512[1024];
extern const float32_t twiddleCoef_1024[2048];
extern const float32_t twiddleCoef_2048[4096];
extern const float32_t twiddleCoef_4096[8192];
#define twiddleCoef twiddleCoef_4096
extern const q31_t twiddleCoef_16_q31[24];
extern const q31_t twiddleCoef_32_q31[48];
extern const q31_t twiddleCoef_64_q31[96];
extern const q31_t twiddleCoef_128_q31[192];
extern const q31_t twiddleCoef_256_q31[384];
extern const q31_t twiddleCoef_512_q31[768];
extern const q31_t twiddleCoef_1024_q31[1536];
extern const q31_t twiddleCoef_2048_q31[3072];
extern const q31_t twiddleCoef_4096_q31[6144];
extern const q15_t twiddleCoef_16_q15[24];
extern const q15_t twiddleCoef_32_q15[48];
extern const q15_t twiddleCoef_64_q15[96];
extern const q15_t twiddleCoef_128_q15[192];
extern const q15_t twiddleCoef_256_q15[384];
extern const q15_t twiddleCoef_512_q15[768];
extern const q15_t twiddleCoef_1024_q15[1536];
extern const q15_t twiddleCoef_2048_q15[3072];
extern const q15_t twiddleCoef_4096_q15[6144];
extern const float32_t twiddleCoef_rfft_32[32];
extern const float32_t twiddleCoef_rfft_64[64];
extern const float32_t twiddleCoef_rfft_128[128];
extern const float32_t twiddleCoef_rfft_256[256];
extern const float32_t twiddleCoef_rfft_512[512];
extern const float32_t twiddleCoef_rfft_1024[1024];
extern const float32_t twiddleCoef_rfft_2048[2048];
extern const float32_t twiddleCoef_rfft_4096[4096];
/* floating-point bit reversal tables */
#define ARMBITREVINDEXTABLE_16_TABLE_LENGTH ((uint16_t)20)
#define ARMBITREVINDEXTABLE_32_TABLE_LENGTH ((uint16_t)48)
#define ARMBITREVINDEXTABLE_64_TABLE_LENGTH ((uint16_t)56)
#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208)
#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440)
#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448)
#define ARMBITREVINDEXTABLE_1024_TABLE_LENGTH ((uint16_t)1800)
#define ARMBITREVINDEXTABLE_2048_TABLE_LENGTH ((uint16_t)3808)
#define ARMBITREVINDEXTABLE_4096_TABLE_LENGTH ((uint16_t)4032)
extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE_16_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE_32_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE_64_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE_1024_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE_2048_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE_4096_TABLE_LENGTH];
/* fixed-point bit reversal tables */
#define ARMBITREVINDEXTABLE_FIXED_16_TABLE_LENGTH ((uint16_t)12)
#define ARMBITREVINDEXTABLE_FIXED_32_TABLE_LENGTH ((uint16_t)24)
#define ARMBITREVINDEXTABLE_FIXED_64_TABLE_LENGTH ((uint16_t)56)
#define ARMBITREVINDEXTABLE_FIXED_128_TABLE_LENGTH ((uint16_t)112)
#define ARMBITREVINDEXTABLE_FIXED_256_TABLE_LENGTH ((uint16_t)240)
#define ARMBITREVINDEXTABLE_FIXED_512_TABLE_LENGTH ((uint16_t)480)
#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992)
#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED_16_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED_32_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED_64_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED_128_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED_256_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED_512_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
/* Tables for Fast Math Sine and Cosine */
extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
#endif /* ARM_COMMON_TABLES_H */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/arm_const_structs.h
+66
View File
@@ -0,0 +1,66 @@
/* ----------------------------------------------------------------------
* Project: CMSIS DSP Library
* Title: arm_const_structs.h
* Description: Constant structs that are initialized for user convenience.
* For example, some can be given as arguments to the arm_cfft_f32() function.
*
* $Date: 27. January 2017
* $Revision: V.1.5.1
*
* Target Processor: Cortex-M cores
* -------------------------------------------------------------------- */
/*
* Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _ARM_CONST_STRUCTS_H
#define _ARM_CONST_STRUCTS_H
#include "arm_math.h"
#include "arm_common_tables.h"
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
#endif
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/arm_math.h
+7160
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/cmsis_armcc.h
+870
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/cmsis_armclang.h
+1877
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/cmsis_compiler.h
+266
View File
@@ -0,0 +1,266 @@
/**************************************************************************//**
* @file cmsis_compiler.h
* @brief CMSIS compiler generic header file
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __CMSIS_COMPILER_H
#define __CMSIS_COMPILER_H
#include <stdint.h>
/*
* Arm Compiler 4/5
*/
#if defined ( __CC_ARM )
#include "cmsis_armcc.h"
/*
* Arm Compiler 6 (armclang)
*/
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#include "cmsis_armclang.h"
/*
* GNU Compiler
*/
#elif defined ( __GNUC__ )
#include "cmsis_gcc.h"
/*
* IAR Compiler
*/
#elif defined ( __ICCARM__ )
#include <cmsis_iccarm.h>
/*
* TI Arm Compiler
*/
#elif defined ( __TI_ARM__ )
#include <cmsis_ccs.h>
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __attribute__((packed))
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __attribute__((packed))
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __attribute__((packed)) T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __attribute__((aligned(x)))
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
/*
* TASKING Compiler
*/
#elif defined ( __TASKING__ )
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all intrinsics,
* Including the CMSIS ones.
*/
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __packed__
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __packed__
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __packed__
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __packed__ T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __align(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
/*
* COSMIC Compiler
*/
#elif defined ( __CSMC__ )
#include <cmsis_csm.h>
#ifndef __ASM
#define __ASM _asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
// NO RETURN is automatically detected hence no warning here
#define __NO_RETURN
#endif
#ifndef __USED
#warning No compiler specific solution for __USED. __USED is ignored.
#define __USED
#endif
#ifndef __WEAK
#define __WEAK __weak
#endif
#ifndef __PACKED
#define __PACKED @packed
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT @packed struct
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION @packed union
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
@packed struct T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
#define __ALIGNED(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
#else
#error Unknown compiler.
#endif
#endif /* __CMSIS_COMPILER_H */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/cmsis_gcc.h
+2088
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/cmsis_iccarm.h
+913
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/cmsis_version.h
+39
View File
@@ -0,0 +1,39 @@
/**************************************************************************//**
* @file cmsis_version.h
* @brief CMSIS Core(M) Version definitions
* @version V5.0.2
* @date 19. April 2017
******************************************************************************/
/*
* Copyright (c) 2009-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CMSIS_VERSION_H
#define __CMSIS_VERSION_H
/* CMSIS Version definitions */
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
#endif
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/core_armv8mbl.h
+1896
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/core_armv8mml.h
+2960
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/core_cm33.h
+2963
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/mpu_armv7.h
+197
View File
@@ -0,0 +1,197 @@
/******************************************************************************
* @file mpu_armv7.h
* @brief CMSIS MPU API for Armv7-M MPU
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV7_H
#define ARM_MPU_ARMV7_H
#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U)
#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U)
#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U)
#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U)
#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U)
#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
#define ARM_MPU_AP_NONE 0U
#define ARM_MPU_AP_PRIV 1U
#define ARM_MPU_AP_URO 2U
#define ARM_MPU_AP_FULL 3U
#define ARM_MPU_AP_PRO 5U
#define ARM_MPU_AP_RO 6U
/** MPU Region Base Address Register Value
*
* \param Region The region to be configured, number 0 to 15.
* \param BaseAddress The base address for the region.
*/
#define ARM_MPU_RBAR(Region, BaseAddress) \
(((BaseAddress) & MPU_RBAR_ADDR_Msk) | \
((Region) & MPU_RBAR_REGION_Msk) | \
(MPU_RBAR_VALID_Msk))
/**
* MPU Region Attribute and Size Register Value
*
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
* \param IsShareable Region is shareable between multiple bus masters.
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
* \param SubRegionDisable Sub-region disable field.
* \param Size Region size of the region to be configured, for example 4K, 8K.
*/
#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \
(((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \
(((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \
(((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \
(((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \
(((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk) | \
(((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \
(((Size ) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \
(MPU_RASR_ENABLE_Msk))
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; //!< The region base address register value (RBAR)
uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
MPU->RNR = rnr;
MPU->RASR = 0U;
}
/** Configure an MPU region.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
{
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
{
MPU->RNR = rnr;
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
while (cnt > MPU_TYPE_RALIASES) {
orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
table += MPU_TYPE_RALIASES;
cnt -= MPU_TYPE_RALIASES;
}
orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
}
#endif
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/mpu_armv8.h
+333
View File
@@ -0,0 +1,333 @@
/******************************************************************************
* @file mpu_armv8.h
* @brief CMSIS MPU API for Armv8-M MPU
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV8_H
#define ARM_MPU_ARMV8_H
/** \brief Attribute for device memory (outer only) */
#define ARM_MPU_ATTR_DEVICE ( 0U )
/** \brief Attribute for non-cacheable, normal memory */
#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U )
/** \brief Attribute for normal memory (outer and inner)
* \param NT Non-Transient: Set to 1 for non-transient data.
* \param WB Write-Back: Set to 1 to use write-back update policy.
* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
*/
#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
(((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRE (1U)
/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGRE (2U)
/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_GRE (3U)
/** \brief Memory Attribute
* \param O Outer memory attributes
* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
*/
#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
/** \brief Normal memory non-shareable */
#define ARM_MPU_SH_NON (0U)
/** \brief Normal memory outer shareable */
#define ARM_MPU_SH_OUTER (2U)
/** \brief Normal memory inner shareable */
#define ARM_MPU_SH_INNER (3U)
/** \brief Memory access permissions
* \param RO Read-Only: Set to 1 for read-only memory.
* \param NP Non-Privileged: Set to 1 for non-privileged memory.
*/
#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
/** \brief Region Base Address Register value
* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
* \param SH Defines the Shareability domain for this memory region.
* \param RO Read-Only: Set to 1 for a read-only memory region.
* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
*/
#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
((BASE & MPU_RBAR_BASE_Pos) | \
((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
/** \brief Region Limit Address Register value
* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
* \param IDX The attribute index to be associated with this memory region.
*/
#define ARM_MPU_RLAR(LIMIT, IDX) \
((LIMIT & MPU_RLAR_LIMIT_Msk) | \
((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
(MPU_RLAR_EN_Msk))
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; /*!< Region Base Address Register value */
uint32_t RLAR; /*!< Region Limit Address Register value */
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#ifdef MPU_NS
/** Enable the Non-secure MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the Non-secure MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable_NS(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#endif
/** Set the memory attribute encoding to the given MPU.
* \param mpu Pointer to the MPU to be configured.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
{
const uint8_t reg = idx / 4U;
const uint32_t pos = ((idx % 4U) * 8U);
const uint32_t mask = 0xFFU << pos;
if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
return; // invalid index
}
mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
}
/** Set the memory attribute encoding.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU, idx, attr);
}
#ifdef MPU_NS
/** Set the memory attribute encoding to the Non-secure MPU.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
}
#endif
/** Clear and disable the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
{
mpu->RNR = rnr;
mpu->RLAR = 0U;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU, rnr);
}
#ifdef MPU_NS
/** Clear and disable the given Non-secure MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU_NS, rnr);
}
#endif
/** Configure the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
mpu->RNR = rnr;
mpu->RBAR = rbar;
mpu->RLAR = rlar;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
}
#ifdef MPU_NS
/** Configure the given Non-secure MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);
}
#endif
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table to the given MPU.
* \param mpu Pointer to the MPU registers to be used.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
if (cnt == 1U) {
mpu->RNR = rnr;
orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
} else {
uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U);
uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
table += c;
cnt -= c;
rnrOffset = 0U;
rnrBase += MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
}
orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
}
}
/** Load the given number of MPU regions from a table.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU, rnr, table, cnt);
}
#ifdef MPU_NS
/** Load the given number of MPU regions from a table to the Non-secure MPU.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
}
#endif
#endif
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/CMSIS/tz_context.h
+70
View File
@@ -0,0 +1,70 @@
/******************************************************************************
* @file tz_context.h
* @brief Context Management for Armv8-M TrustZone
* @version V1.0.1
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef TZ_CONTEXT_H
#define TZ_CONTEXT_H
#include <stdint.h>
#ifndef TZ_MODULEID_T
#define TZ_MODULEID_T
/// \details Data type that identifies secure software modules called by a process.
typedef uint32_t TZ_ModuleId_t;
#endif
/// \details TZ Memory ID identifies an allocated memory slot.
typedef uint32_t TZ_MemoryId_t;
/// Initialize secure context memory system
/// \return execution status (1: success, 0: error)
uint32_t TZ_InitContextSystem_S (void);
/// Allocate context memory for calling secure software modules in TrustZone
/// \param[in] module identifies software modules called from non-secure mode
/// \return value != 0 id TrustZone memory slot identifier
/// \return value 0 no memory available or internal error
TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
/// Load secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
/// Store secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
#endif // TZ_CONTEXT_H
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/board.c
+143
View File
@@ -0,0 +1,143 @@
/*
* Copyright 2017-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <stdint.h>
#include "fsl_common.h"
#include "fsl_debug_console.h"
#include "board.h"
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
#include "fsl_i2c.h"
#endif /* SDK_I2C_BASED_COMPONENT_USED */
#if defined BOARD_USE_CODEC
#include "fsl_wm8904.h"
#endif
/*******************************************************************************
* Variables
******************************************************************************/
#if defined BOARD_USE_CODEC
codec_config_t boardCodecConfig = {.I2C_SendFunc = BOARD_Codec_I2C_Send,
.I2C_ReceiveFunc = BOARD_Codec_I2C_Receive,
.op.Init = WM8904_Init,
.op.Deinit = WM8904_Deinit,
.op.SetFormat = WM8904_SetAudioFormat};
#endif
/*******************************************************************************
* Code
******************************************************************************/
/* Initialize debug console. */
void BOARD_InitDebugConsole(void)
{
/* attach 12 MHz clock to FLEXCOMM0 (debug console) */
CLOCK_AttachClk(BOARD_DEBUG_UART_CLK_ATTACH);
RESET_ClearPeripheralReset(BOARD_DEBUG_UART_RST);
uint32_t uartClkSrcFreq = BOARD_DEBUG_UART_CLK_FREQ;
DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE, BOARD_DEBUG_UART_BAUDRATE, BOARD_DEBUG_UART_TYPE, uartClkSrcFreq);
}
void BOARD_InitDebugConsole_Core1(void)
{
RESET_ClearPeripheralReset(BOARD_DEBUG_UART_RST_CORE1);
uint32_t uartClkSrcFreq = BOARD_DEBUG_UART_CLK_FREQ_CORE1;
DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE_CORE1, BOARD_DEBUG_UART_BAUDRATE_CORE1, BOARD_DEBUG_UART_TYPE_CORE1,
uartClkSrcFreq);
}
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz)
{
i2c_master_config_t i2cConfig = {0};
I2C_MasterGetDefaultConfig(&i2cConfig);
I2C_MasterInit(base, &i2cConfig, clkSrc_Hz);
}
status_t BOARD_I2C_Send(I2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *txBuff,
uint8_t txBuffSize)
{
i2c_master_transfer_t masterXfer;
/* Prepare transfer structure. */
masterXfer.slaveAddress = deviceAddress;
masterXfer.direction = kI2C_Write;
masterXfer.subaddress = subAddress;
masterXfer.subaddressSize = subaddressSize;
masterXfer.data = txBuff;
masterXfer.dataSize = txBuffSize;
masterXfer.flags = kI2C_TransferDefaultFlag;
return I2C_MasterTransferBlocking(base, &masterXfer);
}
status_t BOARD_I2C_Receive(I2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *rxBuff,
uint8_t rxBuffSize)
{
i2c_master_transfer_t masterXfer;
/* Prepare transfer structure. */
masterXfer.slaveAddress = deviceAddress;
masterXfer.subaddress = subAddress;
masterXfer.subaddressSize = subaddressSize;
masterXfer.data = rxBuff;
masterXfer.dataSize = rxBuffSize;
masterXfer.direction = kI2C_Read;
masterXfer.flags = kI2C_TransferDefaultFlag;
return I2C_MasterTransferBlocking(base, &masterXfer);
}
void BOARD_Accel_I2C_Init(void)
{
BOARD_I2C_Init(BOARD_ACCEL_I2C_BASEADDR, BOARD_ACCEL_I2C_CLOCK_FREQ);
}
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff)
{
uint8_t data = (uint8_t)txBuff;
return BOARD_I2C_Send(BOARD_ACCEL_I2C_BASEADDR, deviceAddress, subAddress, subaddressSize, &data, 1);
}
status_t BOARD_Accel_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
{
return BOARD_I2C_Receive(BOARD_ACCEL_I2C_BASEADDR, deviceAddress, subAddress, subaddressSize, rxBuff, rxBuffSize);
}
void BOARD_Codec_I2C_Init(void)
{
BOARD_I2C_Init(BOARD_CODEC_I2C_BASEADDR, BOARD_CODEC_I2C_CLOCK_FREQ);
}
status_t BOARD_Codec_I2C_Send(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize)
{
return BOARD_I2C_Send(BOARD_CODEC_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, (uint8_t *)txBuff,
txBuffSize);
}
status_t BOARD_Codec_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
{
return BOARD_I2C_Receive(BOARD_CODEC_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, rxBuff, rxBuffSize);
}
#endif /* SDK_I2C_BASED_COMPONENT_USED */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/board.h
+249
View File
@@ -0,0 +1,249 @@
/*
* Copyright 2017-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _BOARD_H_
#define _BOARD_H_
#include "clock_config.h"
#include "fsl_common.h"
#include "fsl_reset.h"
#include "fsl_gpio.h"
#include "fsl_iocon.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "LPCXpresso5500"
/*! @brief The UART to use for debug messages. */
/* TODO: rename UART to USART */
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
#define BOARD_DEBUG_UART_INSTANCE 0U
#define BOARD_DEBUG_UART_CLK_FREQ 12000000U
#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0
#define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_Flexcomm0
#define BOARD_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
#define BOARD_UART_IRQ FLEXCOMM0_IRQn
#define BOARD_ACCEL_I2C_BASEADDR I2C4
#define BOARD_ACCEL_I2C_CLOCK_FREQ 12000000
#define BOARD_DEBUG_UART_TYPE_CORE1 kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR_CORE1 (uint32_t) USART1
#define BOARD_DEBUG_UART_INSTANCE_CORE1 1U
#define BOARD_DEBUG_UART_CLK_FREQ_CORE1 12000000U
#define BOARD_DEBUG_UART_CLK_ATTACH_CORE1 kFRO12M_to_FLEXCOMM1
#define BOARD_DEBUG_UART_RST_CORE1 kFC1_RST_SHIFT_RSTn
#define BOARD_DEBUG_UART_CLKSRC_CORE1 kCLOCK_Flexcomm1
#define BOARD_UART_IRQ_HANDLER_CORE1 FLEXCOMM1_IRQHandler
#define BOARD_UART_IRQ_CORE1 FLEXCOMM1_IRQn
#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200U
#endif /* BOARD_DEBUG_UART_BAUDRATE */
#ifndef BOARD_DEBUG_UART_BAUDRATE_CORE1
#define BOARD_DEBUG_UART_BAUDRATE_CORE1 115200U
#endif /* BOARD_DEBUG_UART_BAUDRATE_CORE1 */
#define BOARD_CODEC_I2C_BASEADDR I2C4
#define BOARD_CODEC_I2C_CLOCK_FREQ 12000000
#ifndef BOARD_LED_RED_GPIO
#define BOARD_LED_RED_GPIO GPIO
#endif
#define BOARD_LED_RED_GPIO_PORT 1U
#ifndef BOARD_LED_RED_GPIO_PIN
#define BOARD_LED_RED_GPIO_PIN 6U
#endif
#ifndef BOARD_LED_BLUE_GPIO
#define BOARD_LED_BLUE_GPIO GPIO
#endif
#define BOARD_LED_BLUE_GPIO_PORT 1U
#ifndef BOARD_LED_BLUE_GPIO_PIN
#define BOARD_LED_BLUE_GPIO_PIN 4U
#endif
#ifndef BOARD_LED_GREEN_GPIO
#define BOARD_LED_GREEN_GPIO GPIO
#endif
#define BOARD_LED_GREEN_GPIO_PORT 1U
#ifndef BOARD_LED_GREEN_GPIO_PIN
#define BOARD_LED_GREEN_GPIO_PIN 7U
#endif
#ifndef BOARD_SW1_GPIO
#define BOARD_SW1_GPIO GPIO
#endif
#define BOARD_SW1_GPIO_PORT 0U
#ifndef BOARD_SW1_GPIO_PIN
#define BOARD_SW1_GPIO_PIN 5U
#endif
#define BOARD_SW1_NAME "SW1"
#define BOARD_SW1_IRQ PIN_INT0_IRQn
#define BOARD_SW1_IRQ_HANDLER PIN_INT0_IRQHandler
#ifndef BOARD_SW2_GPIO
#define BOARD_SW2_GPIO GPIO
#endif
#define BOARD_SW2_GPIO_PORT 1U
#ifndef BOARD_SW2_GPIO_PIN
#define BOARD_SW2_GPIO_PIN 18U
#endif
#define BOARD_SW2_NAME "SW2"
#define BOARD_SW2_IRQ PIN_INT1_IRQn
#define BOARD_SW2_IRQ_HANDLER PIN_INT1_IRQHandler
#define BOARD_SW2_GPIO_PININT_INDEX 1
#ifndef BOARD_SW3_GPIO
#define BOARD_SW3_GPIO GPIO
#endif
#define BOARD_SW3_GPIO_PORT 1U
#ifndef BOARD_SW3_GPIO_PIN
#define BOARD_SW3_GPIO_PIN 9U
#endif
#define BOARD_SW3_NAME "SW3"
#define BOARD_SW3_IRQ PIN_INT1_IRQn
#define BOARD_SW3_IRQ_HANDLER PIN_INT1_IRQHandler
#define BOARD_SW3_GPIO_PININT_INDEX 1
#define BOARD_SDIF_BASEADDR SDIF
#define BOARD_SDIF_CLKSRC kCLOCK_SDio
#define BOARD_SDIF_CLK_FREQ CLOCK_GetFreq(kCLOCK_SDio)
#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK
#define BOARD_SDIF_IRQ SDIO_IRQn
#define BOARD_MMC_VCC_SUPPLY kMMC_VoltageWindows270to360
#define BOARD_SD_CARD_DETECT_PIN 17
#define BOARD_SD_CARD_DETECT_PORT 0
#define BOARD_SD_CARD_DETECT_GPIO GPIO
#define BOARD_SD_DETECT_TYPE kSDMMCHOST_DetectCardByHostCD
#define BOARD_SDIF_CD_GPIO_INIT() \
{ \
CLOCK_EnableClock(kCLOCK_Gpio2); \
GPIO_PinInit(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalInput, 0U}); \
}
#define BOARD_SDIF_CD_STATUS() \
GPIO_PinRead(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN)
/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U
#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK
#define LED_RED_INIT(output) \
{ \
IOCON_PinMuxSet(IOCON, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \
(IOCON_PIO_FUNC0 |IOCON_PIO_MODE_INACT |IOCON_PIO_SLEW_STANDARD |IOCON_PIO_INV_DI |IOCON_PIO_DIGITAL_EN |IOCON_PIO_OPENDRAIN_DI)); \
GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */ \
}
#define LED_RED_ON() \
GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_RED_OFF() \
GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED1 \ \ \ \ \ \ \ \ \ \ \
*/
#define LED_RED_TOGGLE() \
GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED1 */
#define LED_BLUE_INIT(output) \
{ \
IOCON_PinMuxSet(IOCON, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \
(IOCON_PIO_FUNC0 |IOCON_PIO_MODE_INACT |IOCON_PIO_SLEW_STANDARD |IOCON_PIO_INV_DI |IOCON_PIO_DIGITAL_EN |IOCON_PIO_OPENDRAIN_DI)); \
GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */ \
}
#define LED_BLUE_ON() \
GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_BLUE_OFF() \
GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED1 */
#define LED_BLUE_TOGGLE() \
GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED1 */
#define LED_GREEN_INIT(output) \
GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED1 */
#define LED_GREEN_ON() \
GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_GREEN_OFF() \
GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED1 */
#define LED_GREEN_TOGGLE() \
GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED1 */
/*! @brief The WIFI-QCA shield pin. */
#define BOARD_INITGT202SHIELD_PWRON_GPIO GPIO
#define BOARD_INITGT202SHIELD_PWRON_PORT 1U
#define BOARD_INITGT202SHIELD_PWRON_PIN 8U
#define BOARD_INITGT202SHIELD_IRQ_GPIO GPIO
#define BOARD_INITGT202SHIELD_IRQ_PORT 1U
#define BOARD_INITGT202SHIELD_IRQ_PIN 9U
/*! @brief The WIFI-QCA shield pin. */
#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO GPIO
#define BOARD_INITSILEX2401SHIELD_PWRON_PORT 1U
#define BOARD_INITSILEX2401SHIELD_PWRON_PIN 7U
#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO GPIO
#define BOARD_INITSILEX2401SHIELD_IRQ_PORT 0U
#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO_PIN 15U
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*******************************************************************************
* API
******************************************************************************/
void BOARD_InitDebugConsole(void);
void BOARD_InitDebugConsole_Core1(void);
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz);
status_t BOARD_I2C_Send(I2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *txBuff,
uint8_t txBuffSize);
status_t BOARD_I2C_Receive(I2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *rxBuff,
uint8_t rxBuffSize);
void BOARD_Accel_I2C_Init(void);
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
status_t BOARD_Accel_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
void BOARD_Codec_I2C_Init(void);
status_t BOARD_Codec_I2C_Send(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Codec_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
#endif /* SDK_I2C_BASED_COMPONENT_USED */
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* _BOARD_H_ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/clock_config.c
+228
View File
@@ -0,0 +1,228 @@
/*
* Copyright 2017-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/*
* How to set up clock using clock driver functions:
*
* 1. Setup clock sources.
*
* 2. Set up wait states of the flash.
*
* 3. Set up all dividers.
*
* 4. Set up all selectors to provide selected clocks.
*/
/* clang-format off */
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Clocks v5.0
processor: LPC55S69
package_id: LPC55S69JBD100
mcu_data: ksdk2_0
processor_version: 0.0.6
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
/* clang-format on */
#include "fsl_power.h"
#include "fsl_clock.h"
#include "clock_config.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*******************************************************************************
* Variables
******************************************************************************/
/* System clock frequency. */
extern uint32_t SystemCoreClock;
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
void BOARD_InitBootClocks(void)
{
BOARD_BootClockFROHF96M();
}
/*******************************************************************************
******************** Configuration BOARD_BootClockFRO12M **********************
******************************************************************************/
/* clang-format off */
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!Configuration
name: BOARD_BootClockFRO12M
outputs:
- {id: System_clock.outFreq, value: 12 MHz}
settings:
- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable}
sources:
- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
/* clang-format on */
/*******************************************************************************
* Variables for BOARD_BootClockFRO12M configuration
******************************************************************************/
/*******************************************************************************
* Code for BOARD_BootClockFRO12M configuration
******************************************************************************/
void BOARD_BootClockFRO12M(void)
{
#ifndef SDK_SECONDARY_CORE
/*!< Set up the clock sources */
/*!< Configure FRO192M */
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */
POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */
/*!< Set up dividers */
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
/*!< Set up clock selectors - Attach clocks to the peripheries */
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */
/*< Set SystemCoreClock variable. */
SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
#endif
}
/*******************************************************************************
******************* Configuration BOARD_BootClockFROHF96M *********************
******************************************************************************/
/* clang-format off */
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!Configuration
name: BOARD_BootClockFROHF96M
called_from_default_init: true
outputs:
- {id: System_clock.outFreq, value: 96 MHz}
settings:
- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable}
- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk}
sources:
- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
/* clang-format on */
/*******************************************************************************
* Variables for BOARD_BootClockFROHF96M configuration
******************************************************************************/
/*******************************************************************************
* Code for BOARD_BootClockFROHF96M configuration
******************************************************************************/
void BOARD_BootClockFROHF96M(void)
{
#ifndef SDK_SECONDARY_CORE
/*!< Set up the clock sources */
/*!< Configure FRO192M */
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */
POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
/*!< Set up dividers */
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
/*!< Set up clock selectors - Attach clocks to the peripheries */
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
/*< Set SystemCoreClock variable. */
SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK;
#endif
}
/*******************************************************************************
******************** Configuration BOARD_BootClockPLL100M *********************
******************************************************************************/
/* clang-format off */
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!Configuration
name: BOARD_BootClockPLL100M
outputs:
- {id: System_clock.outFreq, value: 100 MHz}
settings:
- {id: PLL0_Mode, value: Normal}
- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable}
- {id: ENABLE_CLKIN_ENA, value: Enabled}
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS}
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true}
- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true}
- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true}
sources:
- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz}
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
/* clang-format on */
/*******************************************************************************
* Variables for BOARD_BootClockPLL100M configuration
******************************************************************************/
/*******************************************************************************
* Code for BOARD_BootClockPLL100M configuration
******************************************************************************/
void BOARD_BootClockPLL100M(void)
{
#ifndef SDK_SECONDARY_CORE
/*!< Set up the clock sources */
/*!< Configure FRO192M */
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */
/*!< Set up PLL */
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
const pll_setup_t pll0Setup = {
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(54U) | SYSCON_PLL0CTRL_SELP(26U),
.pllndec = SYSCON_PLL0NDEC_NDIV(4U),
.pllpdec = SYSCON_PLL0PDEC_PDIV(2U),
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
.pllRate = 100000000U,
.flags = PLL_SETUPFLAG_WAITLOCK
};
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
/*!< Set up dividers */
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
/*!< Set up clock selectors - Attach clocks to the peripheries */
CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */
/*< Set SystemCoreClock variable. */
SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK;
#endif
}
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/clock_config.h
+121
View File
@@ -0,0 +1,121 @@
/*
* Copyright 2017-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
******************** Configuration BOARD_BootClockFRO12M **********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockFRO12M configuration
******************************************************************************/
#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */
/*******************************************************************************
* API for BOARD_BootClockFRO12M configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockFRO12M(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
******************* Configuration BOARD_BootClockFROHF96M *********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockFROHF96M configuration
******************************************************************************/
#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */
/*******************************************************************************
* API for BOARD_BootClockFROHF96M configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockFROHF96M(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
******************** Configuration BOARD_BootClockPLL100M *********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockPLL100M configuration
******************************************************************************/
#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */
/*******************************************************************************
* API for BOARD_BootClockPLL100M configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockPLL100M(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/pin_mux.c
+99
View File
@@ -0,0 +1,99 @@
/*
* Copyright 2017-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v5.0
processor: LPC55S69
package_id: LPC55S69JBD100
mcu_data: ksdk2_0
processor_version: 0.0.6
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
#include "fsl_common.h"
#include "fsl_iocon.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
BOARD_InitPins();
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
mode: inactive, slew_rate: standard, invert: disabled, digi_mode: digital, open_drain: disabled}
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
slew_rate: standard, invert: disabled, digi_mode: digital, open_drain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M33 (Core #0) */
void BOARD_InitPins(void)
{
/* Enables the clock for the I/O controller.: Enable Clock. */
CLOCK_EnableClock(kCLOCK_Iocon);
const uint32_t port0_pin29_config = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
IOCON_PinMuxSet(IOCON, 0U, 29U, port0_pin29_config);
const uint32_t port0_pin30_config = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
IOCON_PinMuxSet(IOCON, 0U, 30U, port0_pin30_config);
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/pin_mux.h
+59
View File
@@ -0,0 +1,59 @@
/*
* Copyright 2017-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
#ifndef _PIN_MUX_H_
#define _PIN_MUX_H_
/*!
* @addtogroup pin_mux
* @{
*/
/***********************************************************************************************************************
* API
**********************************************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @brief Calls initialization functions.
*
*/
void BOARD_InitBootPins(void);
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
/*!
* @brief Configures pin routing and optionally pin electrical features.
*
*/
void BOARD_InitPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
#if defined(__cplusplus)
}
#endif
/*!
* @}
*/
#endif /* _PIN_MUX_H_ */
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/lists/generic_list.c
+390
View File
@@ -0,0 +1,390 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*! *********************************************************************************
*************************************************************************************
* Include
*************************************************************************************
********************************************************************************** */
#include "fsl_common.h"
#include "generic_list.h"
/*! *********************************************************************************
*************************************************************************************
* Public functions
*************************************************************************************
********************************************************************************** */
/*! *********************************************************************************
* \brief Initialises the list descriptor.
*
* \param[in] list - LIST_ handle to init.
* max - Maximum number of elements in list. 0 for unlimited.
*
* \return void.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
void LIST_Init(list_handle_t list, uint32_t max)
{
list->head = NULL;
list->tail = NULL;
list->max = max;
list->size = 0;
}
/*! *********************************************************************************
* \brief Gets the list that contains the given element.
*
* \param[in] element - Handle of the element.
*
* \return NULL if element is orphan.
* Handle of the list the element is inserted into.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_handle_t LIST_GetList(list_element_handle_t element)
{
return element->list;
}
/*! *********************************************************************************
* \brief Links element to the tail of the list.
*
* \param[in] list - ID of list to insert into.
* element - element to add
*
* \return kLIST_Full if list is full.
* kLIST_Ok if insertion was successful.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_status_t LIST_AddTail(list_handle_t list, list_element_handle_t element)
{
uint32_t regPrimask = DisableGlobalIRQ();
if ((list->max != 0) && (list->max == list->size))
{
EnableGlobalIRQ(regPrimask);
return kLIST_Full;
}
if (list->size == 0)
{
list->head = element;
}
else
{
list->tail->next = element;
}
element->prev = list->tail;
element->next = NULL;
element->list = list;
list->tail = element;
list->size++;
EnableGlobalIRQ(regPrimask);
return kLIST_Ok;
}
/*! *********************************************************************************
* \brief Links element to the head of the list.
*
* \param[in] list - ID of list to insert into.
* element - element to add
*
* \return kLIST_Full if list is full.
* kLIST_Ok if insertion was successful.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_status_t LIST_AddHead(list_handle_t list, list_element_handle_t element)
{
uint32_t regPrimask = DisableGlobalIRQ();
if ((list->max != 0) && (list->max == list->size))
{
EnableGlobalIRQ(regPrimask);
return kLIST_Full;
}
if (list->size == 0)
{
list->tail = element;
}
else
{
list->head->prev = element;
}
element->next = list->head;
element->prev = NULL;
element->list = list;
list->head = element;
list->size++;
EnableGlobalIRQ(regPrimask);
return kLIST_Ok;
}
/*! *********************************************************************************
* \brief Unlinks element from the head of the list.
*
* \param[in] list - ID of list to remove from.
*
* \return NULL if list is empty.
* ID of removed element(pointer) if removal was successful.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_element_handle_t LIST_RemoveHead(list_handle_t list)
{
list_element_handle_t element;
uint32_t regPrimask = DisableGlobalIRQ();
if ((NULL == list) || (list->size == 0))
{
EnableGlobalIRQ(regPrimask);
return NULL; /*LIST_ is empty*/
}
element = list->head;
list->size--;
if (list->size == 0)
{
list->tail = NULL;
}
else
{
element->next->prev = NULL;
}
list->head = element->next; /*Is NULL if element is head*/
element->list = NULL;
EnableGlobalIRQ(regPrimask);
return element;
}
/*! *********************************************************************************
* \brief Gets head element ID.
*
* \param[in] list - ID of list.
*
* \return NULL if list is empty.
* ID of head element if list is not empty.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_element_handle_t LIST_GetHead(list_handle_t list)
{
return list->head;
}
/*! *********************************************************************************
* \brief Gets next element ID.
*
* \param[in] element - ID of the element.
*
* \return NULL if element is tail.
* ID of next element if exists.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_element_handle_t LIST_GetNext(list_element_handle_t element)
{
return element->next;
}
/*! *********************************************************************************
* \brief Gets previous element ID.
*
* \param[in] element - ID of the element.
*
* \return NULL if element is head.
* ID of previous element if exists.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_element_handle_t LIST_GetPrev(list_element_handle_t element)
{
return element->prev;
}
/*! *********************************************************************************
* \brief Unlinks an element from its list.
*
* \param[in] element - ID of the element to remove.
*
* \return kLIST_OrphanElement if element is not part of any list.
* kLIST_Ok if removal was successful.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_status_t LIST_RemoveElement(list_element_handle_t element)
{
if (element->list == NULL)
{
return kLIST_OrphanElement; /*Element was previusly removed or never added*/
}
uint32_t regPrimask = DisableGlobalIRQ();
if (element->prev == NULL) /*Element is head or solo*/
{
element->list->head = element->next; /*is null if solo*/
}
if (element->next == NULL) /*Element is tail or solo*/
{
element->list->tail = element->prev; /*is null if solo*/
}
if (element->prev != NULL) /*Element is not head*/
{
element->prev->next = element->next;
}
if (element->next != NULL) /*Element is not tail*/
{
element->next->prev = element->prev;
}
element->list->size--;
element->list = NULL;
EnableGlobalIRQ(regPrimask);
return kLIST_Ok;
}
/*! *********************************************************************************
* \brief Links an element in the previous position relative to a given member
* of a list.
*
* \param[in] element - ID of a member of a list.
* newElement - new element to insert before the given member.
*
* \return kLIST_OrphanElement if element is not part of any list.
* kLIST_Full if list is full.
* kLIST_Ok if insertion was successful.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
list_status_t LIST_AddPrevElement(list_element_handle_t element, list_element_handle_t newElement)
{
if (element->list == NULL)
{
return kLIST_OrphanElement; /*Element was previusly removed or never added*/
}
uint32_t regPrimask = DisableGlobalIRQ();
if ((element->list->max != 0) && (element->list->max == element->list->size))
{
EnableGlobalIRQ(regPrimask);
return kLIST_Full;
}
if (element->prev == NULL) /*Element is list head*/
{
element->list->head = newElement;
}
else
{
element->prev->next = newElement;
}
newElement->list = element->list;
element->list->size++;
newElement->next = element;
newElement->prev = element->prev;
element->prev = newElement;
EnableGlobalIRQ(regPrimask);
return kLIST_Ok;
}
/*! *********************************************************************************
* \brief Gets the current size of a list.
*
* \param[in] list - ID of the list.
*
* \return Current size of the list.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
uint32_t LIST_GetSize(list_handle_t list)
{
return list->size;
}
/*! *********************************************************************************
* \brief Gets the number of free places in the list.
*
* \param[in] list - ID of the list.
*
* \return Available size of the list.
*
* \pre
*
* \post
*
* \remarks
*
********************************************************************************** */
uint32_t LIST_GetAvailableSize(list_handle_t list)
{
return (list->max - list->size);
}
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/lists/generic_list.h
+185
View File
@@ -0,0 +1,185 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _GENERIC_LIST_H_
#define _GENERIC_LIST_H_
/*!*********************************************************************************
*************************************************************************************
* Include
*************************************************************************************
********************************************************************************** */
/*! *********************************************************************************
*************************************************************************************
* Public macro definitions
*************************************************************************************
********************************************************************************** */
/*! *********************************************************************************
*************************************************************************************
* Public type definitions
*************************************************************************************
********************************************************************************** */
/*! @brief The list status */
typedef enum _list_status
{
kLIST_Ok = kStatus_Success, /*!< Success */
kLIST_Full = MAKE_STATUS(kStatusGroup_LIST, 1), /*!< FULL */
kLIST_Empty = MAKE_STATUS(kStatusGroup_LIST, 2), /*!< Empty */
kLIST_OrphanElement = MAKE_STATUS(kStatusGroup_LIST, 3), /*!< Orphan Element */
}list_status_t;
/*! @brief The list structure*/
typedef struct list_tag
{
struct list_element_tag *head; /*!< list head */
struct list_element_tag *tail; /*!< list tail */
uint16_t size; /*!< list size */
uint16_t max; /*!< list max number of elements */
}list_t, *list_handle_t;
/*! @brief The list element*/
typedef struct list_element_tag
{
struct list_element_tag *next; /*!< next list element */
struct list_element_tag *prev; /*!< previous list element */
struct list_tag *list; /*!< pointer to the list */
}list_element_t, *list_element_handle_t;
/*! *********************************************************************************
*************************************************************************************
* Public prototypes
*************************************************************************************
********************************************************************************** */
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* _cplusplus */
/*!
* @brief Initialize the list.
*
* This function initialize the list.
*
* @param list - List handle to initialize.
* @param max - Maximum number of elements in list. 0 for unlimited.
*/
void LIST_Init(list_handle_t list, uint32_t max);
/*!
* @brief Gets the list that contains the given element.
*
*
* @param element - Handle of the element.
* @retval NULL if element is orphan, Handle of the list the element is inserted into.
*/
list_handle_t LIST_GetList(list_element_handle_t element);
/*!
* @brief Links element to the head of the list.
*
* @param list - Handle of the list.
* @param element - Handle of the element.
* @retval kLIST_Full if list is full, kLIST_Ok if insertion was successful.
*/
list_status_t LIST_AddHead(list_handle_t list, list_element_handle_t element);
/*!
* @brief Links element to the tail of the list.
*
* @param list - Handle of the list.
* @param element - Handle of the element.
* @retval kLIST_Full if list is full, kLIST_Ok if insertion was successful.
*/
list_status_t LIST_AddTail(list_handle_t list, list_element_handle_t element);
/*!
* @brief Unlinks element from the head of the list.
*
* @param list - Handle of the list.
*
* @retval NULL if list is empty, handle of removed element(pointer) if removal was successful.
*/
list_element_handle_t LIST_RemoveHead(list_handle_t list);
/*!
* @brief Gets head element handle.
*
* @param list - Handle of the list.
*
* @retval NULL if list is empty, handle of removed element(pointer) if removal was successful.
*/
list_element_handle_t LIST_GetHead(list_handle_t list);
/*!
* @brief Gets next element handle for given element handle.
*
* @param element - Handle of the element.
*
* @retval NULL if list is empty, handle of removed element(pointer) if removal was successful.
*/
list_element_handle_t LIST_GetNext(list_element_handle_t element);
/*!
* @brief Gets previous element handle for given element handle.
*
* @param element - Handle of the element.
*
* @retval NULL if list is empty, handle of removed element(pointer) if removal was successful.
*/
list_element_handle_t LIST_GetPrev(list_element_handle_t element);
/*!
* @brief Unlinks an element from its list.
*
* @param element - Handle of the element.
*
* @retval kLIST_OrphanElement if element is not part of any list.
* @retval kLIST_Ok if removal was successful.
*/
list_status_t LIST_RemoveElement(list_element_handle_t element);
/*!
* @brief Links an element in the previous position relative to a given member of a list.
*
* @param element - Handle of the element.
* @param newElement - New element to insert before the given member.
*
* @retval kLIST_OrphanElement if element is not part of any list.
* @retval kLIST_Ok if removal was successful.
*/
list_status_t LIST_AddPrevElement(list_element_handle_t element, list_element_handle_t newElement);
/*!
* @brief Gets the current size of a list.
*
* @param list - Handle of the list.
*
* @retval Current size of the list.
*/
uint32_t LIST_GetSize(list_handle_t list);
/*!
* @brief Gets the number of free places in the list.
*
* @param list - Handle of the list.
*
* @retval Available size of the list.
*/
uint32_t LIST_GetAvailableSize(list_handle_t list);
/* @} */
#if defined(__cplusplus)
}
#endif
#endif /*_GENERIC_LIST_H_*/
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/serial_manager/serial_manager.c
+1241
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/serial_manager/serial_manager.h
+513
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/serial_manager/serial_port_uart.c
+373
View File
@@ -0,0 +1,373 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_common.h"
#include "serial_manager.h"
#if (defined(SERIAL_PORT_TYPE_UART) && (SERIAL_PORT_TYPE_UART > 0U))
#include "uart.h"
#include "serial_port_uart.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#ifndef NDEBUG
#if (defined(DEBUG_CONSOLE_ASSERT_DISABLE) && (DEBUG_CONSOLE_ASSERT_DISABLE > 0U))
#undef assert
#define assert(n)
#endif
#endif
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
#define SERIAL_PORT_UART_RECEIVE_DATA_LENGTH 1U
typedef struct _serial_uart_send_state
{
serial_manager_callback_t callback;
void *callbackParam;
uint8_t *buffer;
uint32_t length;
volatile uint8_t busy;
} serial_uart_send_state_t;
typedef struct _serial_uart_recv_state
{
serial_manager_callback_t callback;
void *callbackParam;
volatile uint8_t busy;
uint8_t readBuffer[SERIAL_PORT_UART_RECEIVE_DATA_LENGTH];
} serial_uart_recv_state_t;
#endif
typedef struct _serial_uart_state
{
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
serial_uart_send_state_t tx;
serial_uart_recv_state_t rx;
#endif
uint8_t usartHandleBuffer[HAL_UART_HANDLE_SIZE];
} serial_uart_state_t;
/*******************************************************************************
* Prototypes
******************************************************************************/
serial_manager_status_t Serial_UartDeinit(serial_handle_t serialHandle);
/*******************************************************************************
* Code
******************************************************************************/
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
/* UART user callback */
static void Serial_UartCallback(hal_uart_handle_t handle, hal_uart_status_t status, void *userData)
{
serial_uart_state_t *serialUartHandle;
serial_manager_callback_message_t msg;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
hal_uart_transfer_t transfer;
#endif
if (NULL == userData)
{
return;
}
serialUartHandle = (serial_uart_state_t *)userData;
if (kStatus_HAL_UartRxIdle == status)
{
if ((NULL != serialUartHandle->rx.callback))
{
msg.buffer = &serialUartHandle->rx.readBuffer[0];
msg.length = sizeof(serialUartHandle->rx.readBuffer);
serialUartHandle->rx.callback(serialUartHandle->rx.callbackParam, &msg, kStatus_SerialManager_Success);
}
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
transfer.data = &serialUartHandle->rx.readBuffer[0];
transfer.dataSize = sizeof(serialUartHandle->rx.readBuffer);
if (kStatus_HAL_UartSuccess ==
HAL_UartTransferReceiveNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), &transfer))
#else
if (kStatus_HAL_UartSuccess ==
HAL_UartReceiveNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
&serialUartHandle->rx.readBuffer[0], sizeof(serialUartHandle->rx.readBuffer)))
#endif
{
serialUartHandle->rx.busy = 1U;
}
else
{
serialUartHandle->rx.busy = 0U;
}
}
else if (kStatus_HAL_UartTxIdle == status)
{
if (serialUartHandle->tx.busy)
{
serialUartHandle->tx.busy = 0U;
if ((NULL != serialUartHandle->tx.callback))
{
msg.buffer = serialUartHandle->tx.buffer;
msg.length = serialUartHandle->tx.length;
serialUartHandle->tx.callback(serialUartHandle->tx.callbackParam, &msg, kStatus_SerialManager_Success);
}
}
}
else
{
}
}
#endif
serial_manager_status_t Serial_UartInit(serial_handle_t serialHandle, void *serialConfig)
{
serial_uart_state_t *serialUartHandle;
serial_port_uart_config_t *uartConfig;
hal_uart_config_t config;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
hal_uart_transfer_t transfer;
#endif
assert(serialConfig);
assert(serialHandle);
if (SERIAL_PORT_UART_HANDLE_SIZE < sizeof(serial_uart_state_t))
{
return kStatus_SerialManager_Error;
}
uartConfig = (serial_port_uart_config_t *)serialConfig;
serialUartHandle = (serial_uart_state_t *)serialHandle;
config.baudRate_Bps = uartConfig->baudRate;
config.parityMode = (hal_uart_parity_mode_t)uartConfig->parityMode;
config.stopBitCount = (hal_uart_stop_bit_count_t)uartConfig->stopBitCount;
config.enableRx = uartConfig->enableRx;
config.enableTx = uartConfig->enableTx;
config.srcClock_Hz = uartConfig->clockRate;
config.instance = uartConfig->instance;
if (kStatus_HAL_UartSuccess != HAL_UartInit(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), &config))
{
return kStatus_SerialManager_Error;
}
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
if (kStatus_HAL_UartSuccess !=
HAL_UartTransferInstallCallback(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
Serial_UartCallback, serialUartHandle))
#else
if (kStatus_HAL_UartSuccess != HAL_UartInstallCallback(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
Serial_UartCallback, serialUartHandle))
#endif
{
return kStatus_SerialManager_Error;
}
if (uartConfig->enableRx)
{
serialUartHandle->rx.busy = 1U;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
transfer.data = &serialUartHandle->rx.readBuffer[0];
transfer.dataSize = sizeof(serialUartHandle->rx.readBuffer);
if (kStatus_HAL_UartSuccess !=
HAL_UartTransferReceiveNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), &transfer))
#else
if (kStatus_HAL_UartSuccess !=
HAL_UartReceiveNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
&serialUartHandle->rx.readBuffer[0], sizeof(serialUartHandle->rx.readBuffer)))
#endif
{
serialUartHandle->rx.busy = 0U;
return kStatus_SerialManager_Error;
}
}
#endif
return kStatus_SerialManager_Success;
}
serial_manager_status_t Serial_UartDeinit(serial_handle_t serialHandle)
{
serial_uart_state_t *serialUartHandle;
assert(serialHandle);
serialUartHandle = (serial_uart_state_t *)serialHandle;
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
HAL_UartTransferAbortReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#else
HAL_UartAbortReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#endif
#endif
HAL_UartDeinit(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
serialUartHandle->tx.busy = 0U;
serialUartHandle->rx.busy = 0U;
#endif
return kStatus_SerialManager_Success;
}
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
serial_manager_status_t Serial_UartWrite(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
serial_uart_state_t *serialUartHandle;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
hal_uart_transfer_t transfer;
#endif
assert(serialHandle);
assert(buffer);
assert(length);
serialUartHandle = (serial_uart_state_t *)serialHandle;
if (serialUartHandle->tx.busy)
{
return kStatus_SerialManager_Busy;
}
serialUartHandle->tx.busy = 1U;
serialUartHandle->tx.buffer = buffer;
serialUartHandle->tx.length = length;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
transfer.data = buffer;
transfer.dataSize = length;
if (kStatus_HAL_UartSuccess !=
HAL_UartTransferSendNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), &transfer))
#else
if (kStatus_HAL_UartSuccess !=
HAL_UartSendNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), buffer, length))
#endif
{
serialUartHandle->tx.busy = 0U;
return kStatus_SerialManager_Error;
}
return kStatus_SerialManager_Success;
}
#else
serial_manager_status_t Serial_UartWrite(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
serial_uart_state_t *serialUartHandle;
assert(serialHandle);
assert(buffer);
assert(length);
serialUartHandle = (serial_uart_state_t *)serialHandle;
return (serial_manager_status_t)HAL_UartSendBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
buffer, length);
}
serial_manager_status_t Serial_UartRead(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
serial_uart_state_t *serialUartHandle;
assert(serialHandle);
assert(buffer);
assert(length);
serialUartHandle = (serial_uart_state_t *)serialHandle;
return (serial_manager_status_t)HAL_UartReceiveBlocking(
((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), buffer, length);
}
#endif
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
serial_manager_status_t Serial_UartCancelWrite(serial_handle_t serialHandle)
{
serial_uart_state_t *serialUartHandle;
serial_manager_callback_message_t msg;
uint32_t primask;
uint8_t isBusy = 0U;
assert(serialHandle);
serialUartHandle = (serial_uart_state_t *)serialHandle;
primask = DisableGlobalIRQ();
isBusy = serialUartHandle->tx.busy;
serialUartHandle->tx.busy = 0U;
EnableGlobalIRQ(primask);
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
HAL_UartTransferAbortSend(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#else
HAL_UartAbortSend(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#endif
if (isBusy)
{
if ((NULL != serialUartHandle->tx.callback))
{
msg.buffer = serialUartHandle->tx.buffer;
msg.length = serialUartHandle->tx.length;
serialUartHandle->tx.callback(serialUartHandle->tx.callbackParam, &msg, kStatus_SerialManager_Canceled);
}
}
return kStatus_SerialManager_Success;
}
serial_manager_status_t Serial_UartInstallTxCallback(serial_handle_t serialHandle,
serial_manager_callback_t callback,
void *callbackParam)
{
serial_uart_state_t *serialUartHandle;
assert(serialHandle);
serialUartHandle = (serial_uart_state_t *)serialHandle;
serialUartHandle->tx.callback = callback;
serialUartHandle->tx.callbackParam = callbackParam;
return kStatus_SerialManager_Success;
}
serial_manager_status_t Serial_UartInstallRxCallback(serial_handle_t serialHandle,
serial_manager_callback_t callback,
void *callbackParam)
{
serial_uart_state_t *serialUartHandle;
assert(serialHandle);
serialUartHandle = (serial_uart_state_t *)serialHandle;
serialUartHandle->rx.callback = callback;
serialUartHandle->rx.callbackParam = callbackParam;
return kStatus_SerialManager_Success;
}
void Serial_UartIsrFunction(serial_handle_t serialHandle)
{
serial_uart_state_t *serialUartHandle;
assert(serialHandle);
serialUartHandle = (serial_uart_state_t *)serialHandle;
HAL_UartIsrFunction(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
}
#endif
#endif
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/serial_manager/serial_port_uart.h
+47
View File
@@ -0,0 +1,47 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __SERIAL_PORT_UART_H__
#define __SERIAL_PORT_UART_H__
/*******************************************************************************
* Definitions
******************************************************************************/
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
#define SERIAL_PORT_UART_HANDLE_SIZE (166U)
#else
#define SERIAL_PORT_UART_HANDLE_SIZE (4U)
#endif
typedef enum _serial_port_uart_parity_mode
{
kSerialManager_UartParityDisabled = 0x0U, /*!< Parity disabled */
kSerialManager_UartParityEven = 0x1U, /*!< Parity even enabled */
kSerialManager_UartParityOdd = 0x2U, /*!< Parity odd enabled */
} serial_port_uart_parity_mode_t;
typedef enum _serial_port_uart_stop_bit_count
{
kSerialManager_UartOneStopBit = 0U, /*!< One stop bit */
kSerialManager_UartTwoStopBit = 1U, /*!< Two stop bits */
} serial_port_uart_stop_bit_count_t;
typedef struct _serial_port_uart_config
{
uint32_t clockRate; /*!< clock rate */
uint32_t baudRate; /*!< baud rate */
serial_port_uart_parity_mode_t parityMode; /*!< Parity mode, disabled (default), even, odd */
serial_port_uart_stop_bit_count_t stopBitCount; /*!< Number of stop bits, 1 stop bit (default) or 2 stop bits */
uint8_t instance; /*!< Instance (0 - UART0, 1 - UART1, ...), detail information
please refer to the SOC corresponding RM. */
uint8_t enableRx; /*!< Enable RX */
uint8_t enableTx; /*!< Enable TX */
} serial_port_uart_config_t;
#endif /* __SERIAL_PORT_UART_H__ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/uart/uart.h
+451
View File
@@ -0,0 +1,451 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __HAL_UART_ADAPTER_H__
#define __HAL_UART_ADAPTER_H__
/*******************************************************************************
* Definitions
******************************************************************************/
#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
#define UART_ADAPTER_NON_BLOCKING_MODE \
(1U) /* Enable or disable Uart adapter non-blocking mode (1 - enable, 0 - disable) */
#else
#ifndef SERIAL_MANAGER_NON_BLOCKING_MODE
#define UART_ADAPTER_NON_BLOCKING_MODE \
(0U) /* Enable or disable Uart adapter non-blocking mode (1 - enable, 0 - disable) */
#else
#define UART_ADAPTER_NON_BLOCKING_MODE SERIAL_MANAGER_NON_BLOCKING_MODE
#endif
#endif
#if (defined(UART_ADAPTER_NON_BLOCKING_MODE) && (UART_ADAPTER_NON_BLOCKING_MODE > 0U))
#define HAL_UART_HANDLE_SIZE (90U)
#else
#define HAL_UART_HANDLE_SIZE (4U)
#endif
#define HAL_UART_TRANSFER_MODE \
(0U) /*!< Whether enable transactional function of the uart. (0 - disable, 1 - enable) \ \
*/
typedef void *hal_uart_handle_t;
/*! @brief uart status */
typedef enum _hal_uart_status
{
kStatus_HAL_UartSuccess = kStatus_Success, /*!< Successfully */
kStatus_HAL_UartTxBusy = MAKE_STATUS(kStatusGroup_HAL_UART, 1), /*!< TX busy */
kStatus_HAL_UartRxBusy = MAKE_STATUS(kStatusGroup_HAL_UART, 2), /*!< RX busy */
kStatus_HAL_UartTxIdle = MAKE_STATUS(kStatusGroup_HAL_UART, 3), /*!< HAL uart transmitter is idle. */
kStatus_HAL_UartRxIdle = MAKE_STATUS(kStatusGroup_HAL_UART, 4), /*!< HAL uart receiver is idle */
kStatus_HAL_UartBaudrateNotSupport =
MAKE_STATUS(kStatusGroup_HAL_UART, 5), /*!< Baudrate is not support in current clock source */
kStatus_HAL_UartProtocolError = MAKE_STATUS(
kStatusGroup_HAL_UART,
6), /*!< Error occurs for Noise, Framing, Parity, etc.
For transcational transfer, The up layer needs to abort the transfer and then starts again */
kStatus_HAL_UartError = MAKE_STATUS(kStatusGroup_HAL_UART, 7), /*!< Error occurs on HAL uart */
} hal_uart_status_t;
/*! @brief uart parity mode. */
typedef enum _hal_uart_parity_mode
{
kHAL_UartParityDisabled = 0x0U, /*!< Parity disabled */
kHAL_UartParityEven = 0x1U, /*!< Parity even enabled */
kHAL_UartParityOdd = 0x2U, /*!< Parity odd enabled */
} hal_uart_parity_mode_t;
/*! @brief uart stop bit count. */
typedef enum _hal_uart_stop_bit_count
{
kHAL_UartOneStopBit = 0U, /*!< One stop bit */
kHAL_UartTwoStopBit = 1U, /*!< Two stop bits */
} hal_uart_stop_bit_count_t;
/*! @brief uart configuration structure. */
typedef struct _hal_uart_config
{
uint32_t srcClock_Hz; /*!< Source clock */
uint32_t baudRate_Bps; /*!< Baud rate */
hal_uart_parity_mode_t parityMode; /*!< Parity mode, disabled (default), even, odd */
hal_uart_stop_bit_count_t stopBitCount; /*!< Number of stop bits, 1 stop bit (default) or 2 stop bits */
uint8_t enableRx; /*!< Enable RX */
uint8_t enableTx; /*!< Enable TX */
uint8_t instance; /*!< Instance (0 - UART0, 1 - UART1, ...), detail information please refer to the
SOC corresponding RM.
Invalid instance value will cause initialization failure. */
} hal_uart_config_t;
/*! @brief uart transfer callback function. */
typedef void (*hal_uart_transfer_callback_t)(hal_uart_handle_t handle, hal_uart_status_t status, void *callbackParam);
/*! @brief uart transfer structure. */
typedef struct _hal_uart_transfer
{
uint8_t *data; /*!< The buffer of data to be transfer.*/
size_t dataSize; /*!< The byte count to be transfer. */
} hal_uart_transfer_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* _cplusplus */
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Initializes a uart instance with the uart handle and the user configuration structure.
*
* This function configures the uart module with user-defined settings. The user can configure the configuration
* structure. The parameter handle is a pointer to point to a memory space of size #HAL_UART_HANDLE_SIZE allocated by the
* caller.
* Example below shows how to use this API to configure the uart.
* @code
* uint8_t g_UartHandleBuffer[HAL_UART_HANDLE_SIZE];
* hal_uart_handle_t g_UartHandle = &g_UartHandleBuffer[0];
* hal_uart_config_t config;
* config.srcClock_Hz = 48000000;
* config.baudRate_Bps = 115200U;
* config.parityMode = kHAL_UartParityDisabled;
* config.stopBitCount = kHAL_UartOneStopBit;
* config.enableRx = 1;
* config.enableTx = 1;
* config.instance = 0;
* HAL_UartInit(g_UartHandle, &config);
* @endcode
*
* @param handle Pointer to point to a memory space of size #HAL_UART_HANDLE_SIZE allocated by the caller.
* @param config Pointer to user-defined configuration structure.
* @retval kStatus_HAL_UartBaudrateNotSupport Baudrate is not support in current clock source.
* @retval kStatus_HAL_UartSuccess uart initialization succeed
*/
hal_uart_status_t HAL_UartInit(hal_uart_handle_t handle, hal_uart_config_t *config);
/*!
* @brief Deinitializes a uart instance.
*
* This function waits for TX complete, disables TX and RX, and disables the uart clock.
*
* @param handle uart handle pointer.
* @retval kStatus_HAL_UartSuccess uart de-initialization succeed
*/
hal_uart_status_t HAL_UartDeinit(hal_uart_handle_t handle);
/* @} */
/*!
* @name Blocking bus Operations
* @{
*/
/*!
* @brief Reads RX data register using a blocking method.
*
* This function polls the RX register, waits for the RX register to be full or for RX FIFO to
* have data, and reads data from the RX register.
*
* @note The function #HAL_UartReceiveBlocking and the function #HAL_UartTransferReceiveNonBlocking
* cannot be used at the same time.
* And, the function #HAL_UartTransferAbortReceive cannot be used to abort the transmission of this function.
*
* @param handle uart handle pointer.
* @param data Start address of the buffer to store the received data.
* @param length Size of the buffer.
* @retval kStatus_HAL_UartError An error occurred while receiving data.
* @retval kStatus_HAL_UartParityError A parity error occurred while receiving data.
* @retval kStatus_HAL_UartSuccess Successfully received all data.
*/
hal_uart_status_t HAL_UartReceiveBlocking(hal_uart_handle_t handle, uint8_t *data, size_t length);
/*!
* @brief Writes to the TX register using a blocking method.
*
* This function polls the TX register, waits for the TX register to be empty or for the TX FIFO
* to have room and writes data to the TX buffer.
*
* @note The function #HAL_UartSendBlocking and the function #HAL_UartTransferSendNonBlocking
* cannot be used at the same time.
* And, the function #HAL_UartTransferAbortSend cannot be used to abort the transmission of this function.
*
* @param handle uart handle pointer.
* @param data Start address of the data to write.
* @param length Size of the data to write.
* @retval kStatus_HAL_UartSuccess Successfully sent all data.
*/
hal_uart_status_t HAL_UartSendBlocking(hal_uart_handle_t handle, const uint8_t *data, size_t length);
/* @} */
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
/*!
* @name Transactional
* @note The transactional API and the functional API cannot be used at the same time. The macro
* #HAL_UART_TRANSFER_MODE is used to set which one will be used. If #HAL_UART_TRANSFER_MODE is zero, the
* functional API with non-blocking mode will be used. Otherwise, transactional API will be used.
* @{
*/
/*!
* @brief Installs a callback and callback parameter.
*
* This function is used to install the callback and callback parameter for uart module.
* When any status of the uart changed, the driver will notify the upper layer by the installed callback
* function. And the status is also passed as status parameter when the callback is called.
*
* @param handle uart handle pointer.
* @param callback The callback function.
* @param callbackParam The parameter of the callback function.
* @retval kStatus_HAL_UartSuccess Successfully install the callback.
*/
hal_uart_status_t HAL_UartTransferInstallCallback(hal_uart_handle_t handle,
hal_uart_transfer_callback_t callback,
void *callbackParam);
/*!
* @brief Receives a buffer of data using an interrupt method.
*
* This function receives data using an interrupt method. This is a non-blocking function, which
* returns directly without waiting for all data to be received.
* The receive request is saved by the uart driver.
* When the new data arrives, the receive request is serviced first.
* When all data is received, the uart driver notifies the upper layer
* through a callback function and passes the status parameter @ref kStatus_UART_RxIdle.
*
* @note The function #HAL_UartReceiveBlocking and the function #HAL_UartTransferReceiveNonBlocking
* cannot be used at the same time.
*
* @param handle uart handle pointer.
* @param transfer uart transfer structure, see #hal_uart_transfer_t.
* @retval kStatus_HAL_UartSuccess Successfully queue the transfer into transmit queue.
* @retval kStatus_HAL_UartRxBusy Previous receive request is not finished.
* @retval kStatus_HAL_UartError An error occurred.
*/
hal_uart_status_t HAL_UartTransferReceiveNonBlocking(hal_uart_handle_t handle, hal_uart_transfer_t *transfer);
/*!
* @brief Transmits a buffer of data using the interrupt method.
*
* This function sends data using an interrupt method. This is a non-blocking function, which
* returns directly without waiting for all data to be written to the TX register. When
* all data is written to the TX register in the ISR, the uart driver calls the callback
* function and passes the @ref kStatus_UART_TxIdle as status parameter.
*
* @note The function #HAL_UartSendBlocking and the function #HAL_UartTransferSendNonBlocking
* cannot be used at the same time.
*
* @param handle uart handle pointer.
* @param transfer uart transfer structure. See #hal_uart_transfer_t.
* @retval kStatus_HAL_UartSuccess Successfully start the data transmission.
* @retval kStatus_HAL_UartTxBusy Previous transmission still not finished; data not all written to TX register yet.
* @retval kStatus_HAL_UartError An error occurred.
*/
hal_uart_status_t HAL_UartTransferSendNonBlocking(hal_uart_handle_t handle, hal_uart_transfer_t *transfer);
/*!
* @brief Gets the number of bytes that have been received.
*
* This function gets the number of bytes that have been received.
*
* @param handle uart handle pointer.
* @param count Receive bytes count.
* @retval kStatus_HAL_UartError An error occurred.
* @retval kStatus_Success Get successfully through the parameter \p count.
*/
hal_uart_status_t HAL_UartTransferGetReceiveCount(hal_uart_handle_t handle, uint32_t *count);
/*!
* @brief Gets the number of bytes written to the uart TX register.
*
* This function gets the number of bytes written to the uart TX
* register by using the interrupt method.
*
* @param handle uart handle pointer.
* @param count Send bytes count.
* @retval kStatus_HAL_UartError An error occurred.
* @retval kStatus_Success Get successfully through the parameter \p count.
*/
hal_uart_status_t HAL_UartTransferGetSendCount(hal_uart_handle_t handle, uint32_t *count);
/*!
* @brief Aborts the interrupt-driven data receiving.
*
* This function aborts the interrupt-driven data receiving. The user can get the remainBytes to know
* how many bytes are not received yet.
*
* @note The function #HAL_UartTransferAbortReceive cannot be used to abort the transmission of
* the function #HAL_UartReceiveBlocking.
*
* @param handle uart handle pointer.
* @retval kStatus_Success Get successfully abort the receiving.
*/
hal_uart_status_t HAL_UartTransferAbortReceive(hal_uart_handle_t handle);
/*!
* @brief Aborts the interrupt-driven data sending.
*
* This function aborts the interrupt-driven data sending. The user can get the remainBytes to find out
* how many bytes are not sent out.
*
* @note The function #HAL_UartTransferAbortSend cannot be used to abort the transmission of
* the function #HAL_UartSendBlocking.
*
* @param handle uart handle pointer.
* @retval kStatus_Success Get successfully abort the sending.
*/
hal_uart_status_t HAL_UartTransferAbortSend(hal_uart_handle_t handle);
/* @} */
#else
/*!
* @name Functional API with non-blocking mode.
* @note The functional API and the transactional API cannot be used at the same time. The macro
* #HAL_UART_TRANSFER_MODE is used to set which one will be used. If #HAL_UART_TRANSFER_MODE is zero, the
* functional API with non-blocking mode will be used. Otherwise, transactional API will be used.
* @{
*/
/*!
* @brief Installs a callback and callback parameter.
*
* This function is used to install the callback and callback parameter for uart module.
* When non-blocking sending or receiving finished, the adapter will notify the upper layer by the installed callback
* function. And the status is also passed as status parameter when the callback is called.
*
* @param handle uart handle pointer.
* @param callback The callback function.
* @param callbackParam The parameter of the callback function.
* @retval kStatus_HAL_UartSuccess Successfully install the callback.
*/
hal_uart_status_t HAL_UartInstallCallback(hal_uart_handle_t handle,
hal_uart_transfer_callback_t callback,
void *callbackParam);
/*!
* @brief Receives a buffer of data using an interrupt method.
*
* This function receives data using an interrupt method. This is a non-blocking function, which
* returns directly without waiting for all data to be received.
* The receive request is saved by the uart adapter.
* When the new data arrives, the receive request is serviced first.
* When all data is received, the uart adapter notifies the upper layer
* through a callback function and passes the status parameter @ref kStatus_UART_RxIdle.
*
* @note The function #HAL_UartReceiveBlocking and the function #HAL_UartReceiveNonBlocking
* cannot be used at the same time.
*
* @param handle uart handle pointer.
* @param data Start address of the data to write.
* @param length Size of the data to write.
* @retval kStatus_HAL_UartSuccess Successfully queue the transfer into transmit queue.
* @retval kStatus_HAL_UartRxBusy Previous receive request is not finished.
* @retval kStatus_HAL_UartError An error occurred.
*/
hal_uart_status_t HAL_UartReceiveNonBlocking(hal_uart_handle_t handle, uint8_t *data, size_t length);
/*!
* @brief Transmits a buffer of data using the interrupt method.
*
* This function sends data using an interrupt method. This is a non-blocking function, which
* returns directly without waiting for all data to be written to the TX register. When
* all data is written to the TX register in the ISR, the uart driver calls the callback
* function and passes the @ref kStatus_UART_TxIdle as status parameter.
*
* @note The function #HAL_UartSendBlocking and the function #HAL_UartSendNonBlocking
* cannot be used at the same time.
*
* @param handle uart handle pointer.
* @param data Start address of the data to write.
* @param length Size of the data to write.
* @retval kStatus_HAL_UartSuccess Successfully start the data transmission.
* @retval kStatus_HAL_UartTxBusy Previous transmission still not finished; data not all written to TX register yet.
* @retval kStatus_HAL_UartError An error occurred.
*/
hal_uart_status_t HAL_UartSendNonBlocking(hal_uart_handle_t handle, const uint8_t *data, size_t length);
/*!
* @brief Gets the number of bytes that have been received.
*
* This function gets the number of bytes that have been received.
*
* @param handle uart handle pointer.
* @param count Receive bytes count.
* @retval kStatus_HAL_UartError An error occurred.
* @retval kStatus_Success Get successfully through the parameter \p count.
*/
hal_uart_status_t HAL_UartGetReceiveCount(hal_uart_handle_t handle, uint32_t *count);
/*!
* @brief Gets the number of bytes written to the uart TX register.
*
* This function gets the number of bytes written to the uart TX
* register by using the interrupt method.
*
* @param handle uart handle pointer.
* @param count Send bytes count.
* @retval kStatus_HAL_UartError An error occurred.
* @retval kStatus_Success Get successfully through the parameter \p count.
*/
hal_uart_status_t HAL_UartGetSendCount(hal_uart_handle_t handle, uint32_t *count);
/*!
* @brief Aborts the interrupt-driven data receiving.
*
* This function aborts the interrupt-driven data receiving. The user can get the remainBytes to know
* how many bytes are not received yet.
*
* @note The function #HAL_UartAbortReceive cannot be used to abort the transmission of
* the function #HAL_UartReceiveBlocking.
*
* @param handle uart handle pointer.
* @retval kStatus_Success Get successfully abort the receiving.
*/
hal_uart_status_t HAL_UartAbortReceive(hal_uart_handle_t handle);
/*!
* @brief Aborts the interrupt-driven data sending.
*
* This function aborts the interrupt-driven data sending. The user can get the remainBytes to find out
* how many bytes are not sent out.
*
* @note The function #HAL_UartAbortSend cannot be used to abort the transmission of
* the function #HAL_UartSendBlocking.
*
* @param handle uart handle pointer.
* @retval kStatus_Success Get successfully abort the sending.
*/
hal_uart_status_t HAL_UartAbortSend(hal_uart_handle_t handle);
/* @} */
#endif
/*!
* @brief uart IRQ handle function.
*
* This function handles the uart transmit and receive IRQ request.
*
* @param handle uart handle pointer.
*/
void HAL_UartIsrFunction(hal_uart_handle_t handle);
#if defined(__cplusplus)
}
#endif
#endif /* __HAL_UART_ADAPTER_H__ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/component/uart/usart_adapter.c
+627
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/device/LPC55S69_cm33_core0.h
+24757
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/device/LPC55S69_cm33_core0_features.h
+292
View File
@@ -0,0 +1,292 @@
/*
** ###################################################################
** Version: rev. 1.0, 2018-08-22
** Build: b190122
**
** Abstract:
** Chip specific module features.
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2019 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** Revisions:
** - rev. 1.0 (2018-08-22)
** Initial version based on v0.2UM
**
** ###################################################################
*/
#ifndef _LPC55S69_cm33_core0_FEATURES_H_
#define _LPC55S69_cm33_core0_FEATURES_H_
/* SOC module features */
/* @brief CASPER availability on the SoC. */
#define FSL_FEATURE_SOC_CASPER_COUNT (1)
/* @brief CRC availability on the SoC. */
#define FSL_FEATURE_SOC_CRC_COUNT (1)
/* @brief CTIMER availability on the SoC. */
#define FSL_FEATURE_SOC_CTIMER_COUNT (5)
/* @brief DMA availability on the SoC. */
#define FSL_FEATURE_SOC_DMA_COUNT (2)
/* @brief FLASH availability on the SoC. */
#define FSL_FEATURE_SOC_FLASH_COUNT (1)
/* @brief FLEXCOMM availability on the SoC. */
#define FSL_FEATURE_SOC_FLEXCOMM_COUNT (9)
/* @brief GINT availability on the SoC. */
#define FSL_FEATURE_SOC_GINT_COUNT (2)
/* @brief GPIO availability on the SoC. */
#define FSL_FEATURE_SOC_GPIO_COUNT (1)
/* @brief SECGPIO availability on the SoC. */
#define FSL_FEATURE_SOC_SECGPIO_COUNT (1)
/* @brief HASHCRYPT availability on the SoC. */
#define FSL_FEATURE_SOC_HASHCRYPT_COUNT (1)
/* @brief I2C availability on the SoC. */
#define FSL_FEATURE_SOC_I2C_COUNT (8)
/* @brief I2S availability on the SoC. */
#define FSL_FEATURE_SOC_I2S_COUNT (8)
/* @brief INPUTMUX availability on the SoC. */
#define FSL_FEATURE_SOC_INPUTMUX_COUNT (1)
/* @brief IOCON availability on the SoC. */
#define FSL_FEATURE_SOC_IOCON_COUNT (1)
/* @brief LPADC availability on the SoC. */
#define FSL_FEATURE_SOC_LPADC_COUNT (1)
/* @brief MAILBOX availability on the SoC. */
#define FSL_FEATURE_SOC_MAILBOX_COUNT (1)
/* @brief MRT availability on the SoC. */
#define FSL_FEATURE_SOC_MRT_COUNT (1)
/* @brief OSTIMER availability on the SoC. */
#define FSL_FEATURE_SOC_OSTIMER_COUNT (1)
/* @brief PINT availability on the SoC. */
#define FSL_FEATURE_SOC_PINT_COUNT (1)
/* @brief SECPINT availability on the SoC. */
#define FSL_FEATURE_SOC_SECPINT_COUNT (1)
/* @brief PMC availability on the SoC. */
#define FSL_FEATURE_SOC_PMC_COUNT (1)
/* @brief POWERQUAD availability on the SoC. */
#define FSL_FEATURE_SOC_POWERQUAD_COUNT (1)
/* @brief PUF availability on the SoC. */
#define FSL_FEATURE_SOC_PUF_COUNT (1)
/* @brief RNG1 availability on the SoC. */
#define FSL_FEATURE_SOC_LPC_RNG1_COUNT (1)
/* @brief RTC availability on the SoC. */
#define FSL_FEATURE_SOC_RTC_COUNT (1)
/* @brief SCT availability on the SoC. */
#define FSL_FEATURE_SOC_SCT_COUNT (1)
/* @brief SDIF availability on the SoC. */
#define FSL_FEATURE_SOC_SDIF_COUNT (1)
/* @brief SPI availability on the SoC. */
#define FSL_FEATURE_SOC_SPI_COUNT (9)
/* @brief SYSCON availability on the SoC. */
#define FSL_FEATURE_SOC_SYSCON_COUNT (1)
/* @brief SYSCTL1 availability on the SoC. */
#define FSL_FEATURE_SOC_SYSCTL1_COUNT (1)
/* @brief USART availability on the SoC. */
#define FSL_FEATURE_SOC_USART_COUNT (8)
/* @brief USB availability on the SoC. */
#define FSL_FEATURE_SOC_USB_COUNT (1)
/* @brief USBFSH availability on the SoC. */
#define FSL_FEATURE_SOC_USBFSH_COUNT (1)
/* @brief USBHSD availability on the SoC. */
#define FSL_FEATURE_SOC_USBHSD_COUNT (1)
/* @brief USBHSH availability on the SoC. */
#define FSL_FEATURE_SOC_USBHSH_COUNT (1)
/* @brief USBPHY availability on the SoC. */
#define FSL_FEATURE_SOC_USBPHY_COUNT (1)
/* @brief UTICK availability on the SoC. */
#define FSL_FEATURE_SOC_UTICK_COUNT (1)
/* @brief WWDT availability on the SoC. */
#define FSL_FEATURE_SOC_WWDT_COUNT (1)
/* LPADC module features */
/* @brief FIFO availability on the SoC. */
#define FSL_FEATURE_LPADC_FIFO_COUNT (2)
/* @brief Has differential mode (bitfield CMDLn[DIFF]). */
#define FSL_FEATURE_LPADC_HAS_CMDL_DIFF (0)
/* @brief Has channel scale (bitfield CMDLn[CSCALE]). */
#define FSL_FEATURE_LPADC_HAS_CMDL_CSCALE (0)
/* @brief Has conversion type select (bitfield CMDLn[CTYPE]). */
#define FSL_FEATURE_LPADC_HAS_CMDL_CTYPE (1)
/* @brief Has conversion resolution select (bitfield CMDLn[MODE]). */
#define FSL_FEATURE_LPADC_HAS_CMDL_MODE (1)
/* @brief Has compare function enable (bitfield CMDHn[CMPEN]). */
#define FSL_FEATURE_LPADC_HAS_CMDH_CMPEN (1)
/* @brief Has Wait for trigger assertion before execution (bitfield CMDHn[WAIT_TRIG]). */
#define FSL_FEATURE_LPADC_HAS_CMDH_WAIT_TRIG (1)
/* @brief Has offset calibration (bitfield CTRL[CALOFS]). */
#define FSL_FEATURE_LPADC_HAS_CTRL_CALOFS (1)
/* @brief Has gain calibration (bitfield CTRL[CAL_REQ]). */
#define FSL_FEATURE_LPADC_HAS_CTRL_CAL_REQ (1)
/* @brief Has calibration average (bitfield CTRL[CAL_AVGS]). */
#define FSL_FEATURE_LPADC_HAS_CTRL_CAL_AVGS (1)
/* @brief Has internal clock (bitfield CFG[ADCKEN]). */
#define FSL_FEATURE_LPADC_HAS_CFG_ADCKEN (0)
/* @brief Enable support for low voltage reference on option 1 reference (bitfield CFG[VREF1RNG]). */
#define FSL_FEATURE_LPADC_HAS_CFG_VREF1RNG (0)
/* @brief Has calibration (bitfield CFG[CALOFS]). */
#define FSL_FEATURE_LPADC_HAS_CFG_CALOFS (0)
/* @brief Has offset trim (register OFSTRIM). */
#define FSL_FEATURE_LPADC_HAS_OFSTRIM (1)
/* CASPER module features */
/* @brief Base address of the CASPER dedicated RAM */
#define FSL_FEATURE_CASPER_RAM_BASE_ADDRESS (0x04000000)
/* @brief Interleaving of the CASPER dedicated RAM */
#define FSL_FEATURE_CASPER_RAM_IS_INTERLEAVED (1)
/* DMA module features */
/* @brief Number of channels */
#define FSL_FEATURE_DMA_NUMBER_OF_CHANNELS (30)
/* HASHCRYPT module features */
/* @brief the address of alias offset */
#define FSL_FEATURE_HASHCRYPT_ALIAS_OFFSET (0x00000000)
/* I2S module features */
/* @brief I2S support dual channel transfer. */
#define FSL_FEATURE_I2S_SUPPORT_SECONDARY_CHANNEL (1)
/* IOCON module features */
/* @brief Func bit field width */
#define FSL_FEATURE_IOCON_FUNC_FIELD_WIDTH (4)
/* MAILBOX module features */
/* @brief Mailbox side for current core */
#define FSL_FEATURE_MAILBOX_SIDE_A (1)
/* MRT module features */
/* @brief number of channels. */
#define FSL_FEATURE_MRT_NUMBER_OF_CHANNELS (4)
/* PINT module features */
/* @brief Number of connected outputs */
#define FSL_FEATURE_PINT_NUMBER_OF_CONNECTED_OUTPUTS (10)
/* POWERLIB module features */
/* @brief Niobe4's Powerlib API is different with other LPC series devices. */
#define FSL_FEATURE_POWERLIB_NIOBE4_EXTEND (1)
/* POWERQUAD module features */
/* @brief Sine and Cossine fix errata */
#define FSL_FEATURE_POWERQUAD_SIN_COS_FIX_ERRATA (1)
/* PUF module features */
/* @brief Number of PUF key slots available on device. */
#define FSL_FEATURE_PUF_HAS_KEYSLOTS (4)
/* @brief the shift status value */
#define FSL_FEATURE_PUF_HAS_SHIFT_STATUS (1)
/* SCT module features */
/* @brief Number of events */
#define FSL_FEATURE_SCT_NUMBER_OF_EVENTS (16)
/* @brief Number of states */
#define FSL_FEATURE_SCT_NUMBER_OF_STATES (32)
/* @brief Number of match capture */
#define FSL_FEATURE_SCT_NUMBER_OF_MATCH_CAPTURE (16)
/* @brief Number of outputs */
#define FSL_FEATURE_SCT_NUMBER_OF_OUTPUTS (10)
/* SDIF module features */
/* @brief FIFO depth, every location is a WORD */
#define FSL_FEATURE_SDIF_FIFO_DEPTH_64_32BITS (64)
/* @brief Max DMA buffer size */
#define FSL_FEATURE_SDIF_INTERNAL_DMA_MAX_BUFFER_SIZE (4096)
/* @brief Max source clock in HZ */
#define FSL_FEATURE_SDIF_MAX_SOURCE_CLOCK (52000000)
/* @brief support 2 cards */
#define FSL_FEATURE_SDIF_ONE_INSTANCE_SUPPORT_TWO_CARD (1)
/* SECPINT module features */
/* @brief Number of connected outputs */
#define FSL_FEATURE_SECPINT_NUMBER_OF_CONNECTED_OUTPUTS (2)
/* SYSCON module features */
/* @brief Pointer to ROM IAP entry functions */
#define FSL_FEATURE_SYSCON_IAP_ENTRY_LOCATION (0x03000205)
/* @brief Flash page size in bytes */
#define FSL_FEATURE_SYSCON_FLASH_PAGE_SIZE_BYTES (512)
/* @brief Flash sector size in bytes */
#define FSL_FEATURE_SYSCON_FLASH_SECTOR_SIZE_BYTES (32768)
/* @brief Flash size in bytes */
#define FSL_FEATURE_SYSCON_FLASH_SIZE_BYTES (622592)
/* @brief Has Power Down mode */
#define FSL_FEATURE_SYSCON_HAS_POWERDOWN_MODE (1)
/* @brief CCM_ANALOG availability on the SoC. */
#define FSL_FEATURE_SOC_CCM_ANALOG_COUNT (1)
/* USB module features */
/* @brief Size of the USB dedicated RAM */
#define FSL_FEATURE_USB_USB_RAM (0x00004000)
/* @brief Base address of the USB dedicated RAM */
#define FSL_FEATURE_USB_USB_RAM_BASE_ADDRESS (0x40100000)
/* @brief USB version */
#define FSL_FEATURE_USB_VERSION (200)
/* @brief Number of the endpoint in USB FS */
#define FSL_FEATURE_USB_EP_NUM (5)
/* USBFSH module features */
/* @brief Size of the USB dedicated RAM */
#define FSL_FEATURE_USBFSH_USB_RAM (0x00004000)
/* @brief Base address of the USB dedicated RAM */
#define FSL_FEATURE_USBFSH_USB_RAM_BASE_ADDRESS (0x40100000)
/* @brief USBFSH version */
#define FSL_FEATURE_USBFSH_VERSION (200)
/* USBHSD module features */
/* @brief Size of the USB dedicated RAM */
#define FSL_FEATURE_USBHSD_USB_RAM (0x00004000)
/* @brief Base address of the USB dedicated RAM */
#define FSL_FEATURE_USBHSD_USB_RAM_BASE_ADDRESS (0x40100000)
/* @brief USBHSD version */
#define FSL_FEATURE_USBHSD_VERSION (300)
/* @brief Number of the endpoint in USB HS */
#define FSL_FEATURE_USBHSD_EP_NUM (6)
/* USBHSH module features */
/* @brief Size of the USB dedicated RAM */
#define FSL_FEATURE_USBHSH_USB_RAM (0x00004000)
/* @brief Base address of the USB dedicated RAM */
#define FSL_FEATURE_USBHSH_USB_RAM_BASE_ADDRESS (0x40100000)
/* @brief USBHSH version */
#define FSL_FEATURE_USBHSH_VERSION (300)
/* UTICK module features */
/* @brief UTICK does not support PD configure. */
#define FSL_FEATURE_UTICK_HAS_NO_PDCFG (1)
/* WWDT module features */
/* @brief WWDT does not support oscillator lock. */
#define FSL_FEATURE_WWDT_HAS_NO_OSCILLATOR_LOCK (1)
/* @brief WWDT does not support power down configure */
#define FSL_FEATURE_WWDT_HAS_NO_PDCFG (1)
#endif /* _LPC55S69_cm33_core0_FEATURES_H_ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/device/fsl_device_registers.h
+44
View File
@@ -0,0 +1,44 @@
/*
* Copyright 2014-2016 Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*
*/
#ifndef __FSL_DEVICE_REGISTERS_H__
#define __FSL_DEVICE_REGISTERS_H__
/*
* Include the cpu specific register header files.
*
* The CPU macro should be declared in the project or makefile.
*/
#if (defined(CPU_LPC55S69JBD100_cm33_core0) || defined(CPU_LPC55S69JET98_cm33_core0))
#define LPC55S69_cm33_core0_SERIES
/* CMSIS-style register definitions */
#include "LPC55S69_cm33_core0.h"
/* CPU specific feature definitions */
#include "LPC55S69_cm33_core0_features.h"
#elif (defined(CPU_LPC55S69JBD100_cm33_core1) || defined(CPU_LPC55S69JET98_cm33_core1))
#define LPC55S69_cm33_core1_SERIES
/* CMSIS-style register definitions */
#include "LPC55S69_cm33_core1.h"
/* CPU specific feature definitions */
#include "LPC55S69_cm33_core1_features.h"
#else
#error "No valid CPU defined!"
#endif
#endif /* __FSL_DEVICE_REGISTERS_H__ */
/*******************************************************************************
* EOF
******************************************************************************/
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/device/system_LPC55S69_cm33_core0.c
+369
View File
@@ -0,0 +1,369 @@
/*
** ###################################################################
** Processors: LPC55S69JBD100_cm33_core0
** LPC55S69JET98_cm33_core0
**
** Compilers: GNU C Compiler
** IAR ANSI C/C++ Compiler for ARM
** Keil ARM C/C++ Compiler
** MCUXpresso Compiler
**
** Reference manual: LPC55xx/LPC55Sxx User manual Rev.0.4 25 Sep 2018
** Version: rev. 1.0, 2018-08-22
** Build: b181219
**
** Abstract:
** Provides a system configuration function and a global variable that
** contains the system frequency. It configures the device and initializes
** the oscillator (PLL) that is part of the microcontroller device.
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2018 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** Revisions:
** - rev. 1.0 (2018-08-22)
** Initial version based on v0.2UM
**
** ###################################################################
*/
/*!
* @file LPC55S69_cm33_core0
* @version 1.0
* @date 2018-08-22
* @brief Device specific configuration file for LPC55S69_cm33_core0
* (implementation file)
*
* Provides a system configuration function and a global variable that contains
* the system frequency. It configures the device and initializes the oscillator
* (PLL) that is part of the microcontroller device.
*/
#include <stdint.h>
#include "fsl_device_registers.h"
/* PLL0 SSCG control1 */
#define PLL_SSCG_MD_FRACT_P 0U
#define PLL_SSCG_MD_INT_P 25U
#define PLL_SSCG_MD_FRACT_M (0x1FFFFFFUL << PLL_SSCG_MD_FRACT_P)
#define PLL_SSCG_MD_INT_M ((uint64_t)0xFFUL << PLL_SSCG_MD_INT_P)
/* Get predivider (N) from PLL0 NDEC setting */
static uint32_t findPll0PreDiv(void)
{
uint32_t preDiv = 1;
/* Direct input is not used? */
if ((SYSCON->PLL0CTRL & SYSCON_PLL0CTRL_BYPASSPREDIV_MASK) == 0)
{
preDiv = SYSCON->PLL0NDEC & SYSCON_PLL0NDEC_NDIV_MASK;
if (preDiv == 0)
{
preDiv = 1;
}
}
return preDiv;
}
/* Get postdivider (P) from PLL0 PDEC setting */
static uint32_t findPll0PostDiv(void)
{
uint32_t postDiv = 1;
if ((SYSCON->PLL0CTRL & SYSCON_PLL0CTRL_BYPASSPOSTDIV_MASK) == 0)
{
if (SYSCON->PLL0CTRL & SYSCON_PLL0CTRL_BYPASSPOSTDIV2_MASK)
{
postDiv = SYSCON->PLL0PDEC & SYSCON_PLL0PDEC_PDIV_MASK;
}
else
{
postDiv = 2 * (SYSCON->PLL0PDEC & SYSCON_PLL0PDEC_PDIV_MASK);
}
if (postDiv == 0)
{
postDiv = 2;
}
}
return postDiv;
}
/* Get multiplier (M) from PLL0 SSCG and SEL_EXT settings */
static float findPll0MMult(void)
{
float mMult = 1;
float mMult_fract;
uint32_t mMult_int;
if (SYSCON->PLL0SSCG1 & SYSCON_PLL0SSCG1_SEL_EXT_MASK)
{
mMult = (SYSCON->PLL0SSCG1 & SYSCON_PLL0SSCG1_MDIV_EXT_MASK) >> SYSCON_PLL0SSCG1_MDIV_EXT_SHIFT;
}
else
{
mMult_int = ((SYSCON->PLL0SSCG1 & SYSCON_PLL0SSCG1_MD_MBS_MASK) << 7U) | ((SYSCON->PLL0SSCG0) >> PLL_SSCG_MD_INT_P);
mMult_fract = ((float)((SYSCON->PLL0SSCG0) & PLL_SSCG_MD_FRACT_M)/(1 << PLL_SSCG_MD_INT_P));
mMult = (float)mMult_int + mMult_fract;
}
if (mMult == 0)
{
mMult = 1;
}
return mMult;
}
/* Get predivider (N) from PLL1 NDEC setting */
static uint32_t findPll1PreDiv(void)
{
uint32_t preDiv = 1;
/* Direct input is not used? */
if ((SYSCON->PLL1CTRL & SYSCON_PLL1CTRL_BYPASSPREDIV_MASK) == 0)
{
preDiv = SYSCON->PLL1NDEC & SYSCON_PLL1NDEC_NDIV_MASK;
if (preDiv == 0)
{
preDiv = 1;
}
}
return preDiv;
}
/* Get postdivider (P) from PLL1 PDEC setting */
static uint32_t findPll1PostDiv(void)
{
uint32_t postDiv = 1;
if ((SYSCON->PLL1CTRL & SYSCON_PLL1CTRL_BYPASSPOSTDIV_MASK) == 0)
{
if (SYSCON->PLL1CTRL & SYSCON_PLL1CTRL_BYPASSPOSTDIV2_MASK)
{
postDiv = SYSCON->PLL1PDEC & SYSCON_PLL1PDEC_PDIV_MASK;
}
else
{
postDiv = 2 * (SYSCON->PLL1PDEC & SYSCON_PLL1PDEC_PDIV_MASK);
}
if (postDiv == 0)
{
postDiv = 2;
}
}
return postDiv;
}
/* Get multiplier (M) from PLL1 MDEC settings */
static uint32_t findPll1MMult(void)
{
uint32_t mMult = 1;
mMult = SYSCON->PLL1MDEC & SYSCON_PLL1MDEC_MDIV_MASK;
if (mMult == 0)
{
mMult = 1;
}
return mMult;
}
/* Get FRO 12M Clk */
/*! brief Return Frequency of FRO 12MHz
* return Frequency of FRO 12MHz
*/
static uint32_t CLOCK_GetFro12MFreq(void)
{
return (PMC->PDRUNCFG0 & PMC_PDRUNCFG0_PDEN_FRO192M_MASK) ?
0 :
(ANACTRL->FRO192M_CTRL & ANACTRL_FRO192M_CTRL_ENA_12MHZCLK_MASK) ? 12000000U : 0U;
}
/* Get FRO 1M Clk */
/*! brief Return Frequency of FRO 1MHz
* return Frequency of FRO 1MHz
*/
static uint32_t CLOCK_GetFro1MFreq(void)
{
return (SYSCON->CLOCK_CTRL & SYSCON_CLOCK_CTRL_FRO1MHZ_CLK_ENA_MASK) ? 1000000U : 0U;
}
/* Get EXT OSC Clk */
/*! brief Return Frequency of External Clock
* return Frequency of External Clock. If no external clock is used returns 0.
*/
static uint32_t CLOCK_GetExtClkFreq(void)
{
return (ANACTRL->XO32M_CTRL & ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK) ? CLK_CLK_IN : 0U;
}
/* Get HF FRO Clk */
/*! brief Return Frequency of High-Freq output of FRO
* return Frequency of High-Freq output of FRO
*/
static uint32_t CLOCK_GetFroHfFreq(void)
{
return (PMC->PDRUNCFG0 & PMC_PDRUNCFG0_PDEN_FRO192M_MASK) ?
0 :
(ANACTRL->FRO192M_CTRL & ANACTRL_FRO192M_CTRL_ENA_96MHZCLK_MASK) ? 96000000U : 0U;
}
/* Get RTC OSC Clk */
/*! brief Return Frequency of 32kHz osc
* return Frequency of 32kHz osc
*/
static uint32_t CLOCK_GetOsc32KFreq(void)
{
return ((~(PMC->PDRUNCFG0 & PMC_PDRUNCFG0_PDEN_FRO32K_MASK)) && (PMC->RTCOSC32K & PMC_RTCOSC32K_SEL(0))) ?
CLK_RTC_32K_CLK :
((~(PMC->PDRUNCFG0 & PMC_PDRUNCFG0_PDEN_XTAL32K_MASK)) && (PMC->RTCOSC32K & PMC_RTCOSC32K_SEL(1))) ?
CLK_RTC_32K_CLK :
0U;
}
/* ----------------------------------------------------------------------------
-- Core clock
---------------------------------------------------------------------------- */
uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK;
/* ----------------------------------------------------------------------------
-- SystemInit()
---------------------------------------------------------------------------- */
__attribute__ ((weak)) void SystemInit (void) {
#if ((__FPU_PRESENT == 1) && (__FPU_USED == 1))
SCB->CPACR |= ((3UL << 10*2) | (3UL << 11*2)); /* set CP10, CP11 Full Access */
#endif /* ((__FPU_PRESENT == 1) && (__FPU_USED == 1)) */
SCB->CPACR |= ((3UL << 0*2) | (3UL << 1*2)); /* set CP0, CP1 Full Access (enable PowerQuad) */
SCB->NSACR |= ((3UL << 0) | (3UL << 10)); /* enable CP0, CP1, CP10, CP11 Non-secure Access */
#if defined(__MCUXPRESSO)
extern void(*const g_pfnVectors[]) (void);
SCB->VTOR = (uint32_t) &g_pfnVectors;
#else
extern void *__Vectors;
SCB->VTOR = (uint32_t) &__Vectors;
#endif
SYSCON->TRACECLKDIV = 0;
/* Optionally enable RAM banks that may be off by default at reset */
#if !defined(DONT_ENABLE_DISABLED_RAMBANKS)
SYSCON->AHBCLKCTRLSET[0] = SYSCON_AHBCLKCTRL0_SRAM_CTRL1_MASK | SYSCON_AHBCLKCTRL0_SRAM_CTRL2_MASK
| SYSCON_AHBCLKCTRL0_SRAM_CTRL3_MASK | SYSCON_AHBCLKCTRL0_SRAM_CTRL4_MASK;
#endif
SystemInitHook();
}
/* ----------------------------------------------------------------------------
-- SystemCoreClockUpdate()
---------------------------------------------------------------------------- */
void SystemCoreClockUpdate (void) {
uint32_t clkRate = 0;
uint32_t prediv, postdiv;
float workRate;
uint64_t workRate1;
switch (SYSCON->MAINCLKSELB & SYSCON_MAINCLKSELB_SEL_MASK)
{
case 0x00: /* MAINCLKSELA clock (main_clk_a)*/
switch (SYSCON->MAINCLKSELA & SYSCON_MAINCLKSELA_SEL_MASK)
{
case 0x00: /* FRO 12 MHz (fro_12m) */
clkRate = CLOCK_GetFro12MFreq();
break;
case 0x01: /* CLKIN (clk_in) */
clkRate = CLOCK_GetExtClkFreq();
break;
case 0x02: /* Fro 1MHz (fro_1m) */
clkRate = CLOCK_GetFro1MFreq();
break;
default: /* = 0x03 = FRO 96 MHz (fro_hf) */
clkRate = CLOCK_GetFroHfFreq();
break;
}
break;
case 0x01: /* PLL0 clock (pll0_clk)*/
switch (SYSCON->PLL0CLKSEL & SYSCON_PLL0CLKSEL_SEL_MASK)
{
case 0x00: /* FRO 12 MHz (fro_12m) */
clkRate = CLOCK_GetFro12MFreq();
break;
case 0x01: /* CLKIN (clk_in) */
clkRate = CLOCK_GetExtClkFreq();
break;
case 0x02: /* Fro 1MHz (fro_1m) */
clkRate = CLOCK_GetFro1MFreq();
break;
case 0x03: /* RTC oscillator 32 kHz output (32k_clk) */
clkRate = CLOCK_GetOsc32KFreq();
break;
default:
break;
}
if (((SYSCON->PLL0CTRL & SYSCON_PLL0CTRL_BYPASSPLL_MASK) == 0) && (SYSCON->PLL0CTRL & SYSCON_PLL0CTRL_CLKEN_MASK) && ((PMC->PDRUNCFG0 & PMC_PDRUNCFG0_PDEN_PLL0_MASK) == 0) && ((PMC->PDRUNCFG0 & PMC_PDRUNCFG0_PDEN_PLL0_SSCG_MASK) == 0))
{
prediv = findPll0PreDiv();
postdiv = findPll0PostDiv();
/* Adjust input clock */
clkRate = clkRate / prediv;
/* MDEC used for rate */
workRate = (float)clkRate * (float)findPll0MMult();
clkRate = (uint32_t)(workRate / ((float)postdiv));
}
break;
case 0x02: /* PLL1 clock (pll1_clk)*/
switch (SYSCON->PLL1CLKSEL & SYSCON_PLL1CLKSEL_SEL_MASK)
{
case 0x00: /* FRO 12 MHz (fro_12m) */
clkRate = CLOCK_GetFro12MFreq();
break;
case 0x01: /* CLKIN (clk_in) */
clkRate = CLOCK_GetExtClkFreq();
break;
case 0x02: /* Fro 1MHz (fro_1m) */
clkRate = CLOCK_GetFro1MFreq();
break;
case 0x03: /* RTC oscillator 32 kHz output (32k_clk) */
clkRate = CLOCK_GetOsc32KFreq();
break;
default:
break;
}
if (((SYSCON->PLL1CTRL & SYSCON_PLL1CTRL_BYPASSPLL_MASK) == 0) && (SYSCON->PLL1CTRL & SYSCON_PLL1CTRL_CLKEN_MASK) && ((PMC->PDRUNCFG0 & PMC_PDRUNCFG0_PDEN_PLL1_MASK) == 0))
{
/* PLL is not in bypass mode, get pre-divider, post-divider, and M divider */
prediv = findPll1PreDiv();
postdiv = findPll1PostDiv();
/* Adjust input clock */
clkRate = clkRate / prediv;
/* MDEC used for rate */
workRate1 = (uint64_t)clkRate * (uint64_t)findPll1MMult();
clkRate = workRate1 / ((uint64_t)postdiv);
}
break;
case 0x03: /* RTC oscillator 32 kHz output (32k_clk) */
clkRate = CLOCK_GetOsc32KFreq();
break;
default:
break;
}
SystemCoreClock = clkRate / ((SYSCON->AHBCLKDIV & 0xFF) + 1);
}
/* ----------------------------------------------------------------------------
-- SystemInitHook()
---------------------------------------------------------------------------- */
__attribute__ ((weak)) void SystemInitHook (void) {
/* Void implementation of the weak function. */
}
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/device/system_LPC55S69_cm33_core0.h
+110
View File
@@ -0,0 +1,110 @@
/*
** ###################################################################
** Processors: LPC55S69JBD100_cm33_core0
** LPC55S69JET98_cm33_core0
**
** Compilers: GNU C Compiler
** IAR ANSI C/C++ Compiler for ARM
** Keil ARM C/C++ Compiler
** MCUXpresso Compiler
**
** Reference manual: LPC55xx/LPC55Sxx User manual Rev.0.4 25 Sep 2018
** Version: rev. 1.0, 2018-08-22
** Build: b181219
**
** Abstract:
** Provides a system configuration function and a global variable that
** contains the system frequency. It configures the device and initializes
** the oscillator (PLL) that is part of the microcontroller device.
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2018 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** Revisions:
** - rev. 1.0 (2018-08-22)
** Initial version based on v0.2UM
**
** ###################################################################
*/
/*!
* @file LPC55S69_cm33_core0
* @version 1.0
* @date 2018-08-22
* @brief Device specific configuration file for LPC55S69_cm33_core0 (header
* file)
*
* Provides a system configuration function and a global variable that contains
* the system frequency. It configures the device and initializes the oscillator
* (PLL) that is part of the microcontroller device.
*/
#ifndef _SYSTEM_LPC55S69_cm33_core0_H_
#define _SYSTEM_LPC55S69_cm33_core0_H_ /**< Symbol preventing repeated inclusion */
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#define DEFAULT_SYSTEM_CLOCK 12000000u /* Default System clock value */
#define CLK_RTC_32K_CLK 32768u /* RTC oscillator 32 kHz output (32k_clk */
#define CLK_FRO_12MHZ 12000000u /* FRO 12 MHz (fro_12m) */
#define CLK_FRO_48MHZ 48000000u /* FRO 48 MHz (fro_48m) */
#define CLK_FRO_96MHZ 96000000u /* FRO 96 MHz (fro_96m) */
#define CLK_CLK_IN 16000000u /* Default CLK_IN pin clock */
/**
* @brief System clock frequency (core clock)
*
* The system clock frequency supplied to the SysTick timer and the processor
* core clock. This variable can be used by the user application to setup the
* SysTick timer or configure other parameters. It may also be used by debugger to
* query the frequency of the debug timer or configure the trace clock speed
* SystemCoreClock is initialized with a correct predefined value.
*/
extern uint32_t SystemCoreClock;
/**
* @brief Setup the microcontroller system.
*
* Typically this function configures the oscillator (PLL) that is part of the
* microcontroller device. For systems with variable clock speed it also updates
* the variable SystemCoreClock. SystemInit is called from startup_device file.
*/
void SystemInit (void);
/**
* @brief Updates the SystemCoreClock variable.
*
* It must be called whenever the core clock is changed during program
* execution. SystemCoreClockUpdate() evaluates the clock register settings and calculates
* the current core clock.
*/
void SystemCoreClockUpdate (void);
/**
* @brief SystemInit function hook.
*
* This weak function allows to call specific initialization code during the
* SystemInit() execution.This can be used when an application specific code needs
* to be called as close to the reset entry as possible (for example the Multicore
* Manager MCMGR_EarlyInit() function call).
* NOTE: No global r/w variables can be used in this hook function because the
* initialization of these variables happens after this function.
*/
void SystemInitHook (void);
#ifdef __cplusplus
}
#endif
#endif /* _SYSTEM_LPC55S69_cm33_core0_H_ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_clock.c
+1988
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_clock.h
+1288
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_common.c
+147
View File
@@ -0,0 +1,147 @@
/*
* Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_common.h"
#define SDK_MEM_MAGIC_NUMBER 12345U
typedef struct _mem_align_control_block
{
uint16_t identifier; /*!< Identifier for the memory control block. */
uint16_t offset; /*!< offset from aligned address to real address */
} mem_align_cb_t;
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.common"
#endif
#ifndef __GIC_PRIO_BITS
#if defined(ENABLE_RAM_VECTOR_TABLE)
uint32_t InstallIRQHandler(IRQn_Type irq, uint32_t irqHandler)
{
/* Addresses for VECTOR_TABLE and VECTOR_RAM come from the linker file */
#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
extern uint32_t Image$$VECTOR_ROM$$Base[];
extern uint32_t Image$$VECTOR_RAM$$Base[];
extern uint32_t Image$$RW_m_data$$Base[];
#define __VECTOR_TABLE Image$$VECTOR_ROM$$Base
#define __VECTOR_RAM Image$$VECTOR_RAM$$Base
#define __RAM_VECTOR_TABLE_SIZE (((uint32_t)Image$$RW_m_data$$Base - (uint32_t)Image$$VECTOR_RAM$$Base))
#elif defined(__ICCARM__)
extern uint32_t __RAM_VECTOR_TABLE_SIZE[];
extern uint32_t __VECTOR_TABLE[];
extern uint32_t __VECTOR_RAM[];
#elif defined(__GNUC__)
extern uint32_t __VECTOR_TABLE[];
extern uint32_t __VECTOR_RAM[];
extern uint32_t __RAM_VECTOR_TABLE_SIZE_BYTES[];
uint32_t __RAM_VECTOR_TABLE_SIZE = (uint32_t)(__RAM_VECTOR_TABLE_SIZE_BYTES);
#endif /* defined(__CC_ARM) || defined(__ARMCC_VERSION) */
uint32_t n;
uint32_t ret;
uint32_t irqMaskValue;
irqMaskValue = DisableGlobalIRQ();
if (SCB->VTOR != (uint32_t)__VECTOR_RAM)
{
/* Copy the vector table from ROM to RAM */
for (n = 0; n < ((uint32_t)__RAM_VECTOR_TABLE_SIZE) / sizeof(uint32_t); n++)
{
__VECTOR_RAM[n] = __VECTOR_TABLE[n];
}
/* Point the VTOR to the position of vector table */
SCB->VTOR = (uint32_t)__VECTOR_RAM;
}
ret = __VECTOR_RAM[irq + 16];
/* make sure the __VECTOR_RAM is noncachable */
__VECTOR_RAM[irq + 16] = irqHandler;
EnableGlobalIRQ(irqMaskValue);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
return ret;
}
#endif /* ENABLE_RAM_VECTOR_TABLE. */
#endif /* __GIC_PRIO_BITS. */
#if (defined(FSL_FEATURE_SOC_SYSCON_COUNT) && (FSL_FEATURE_SOC_SYSCON_COUNT > 0))
#if !(defined(FSL_FEATURE_SYSCON_STARTER_DISCONTINUOUS) && FSL_FEATURE_SYSCON_STARTER_DISCONTINUOUS)
void EnableDeepSleepIRQ(IRQn_Type interrupt)
{
uint32_t intNumber = (uint32_t)interrupt;
uint32_t index = 0;
while (intNumber >= 32u)
{
index++;
intNumber -= 32u;
}
SYSCON->STARTERSET[index] = 1u << intNumber;
EnableIRQ(interrupt); /* also enable interrupt at NVIC */
}
void DisableDeepSleepIRQ(IRQn_Type interrupt)
{
uint32_t intNumber = (uint32_t)interrupt;
DisableIRQ(interrupt); /* also disable interrupt at NVIC */
uint32_t index = 0;
while (intNumber >= 32u)
{
index++;
intNumber -= 32u;
}
SYSCON->STARTERCLR[index] = 1u << intNumber;
}
#endif /* FSL_FEATURE_SYSCON_STARTER_DISCONTINUOUS */
#endif /* FSL_FEATURE_SOC_SYSCON_COUNT */
void *SDK_Malloc(size_t size, size_t alignbytes)
{
mem_align_cb_t *p_cb = NULL;
uint32_t alignedsize = SDK_SIZEALIGN(size, alignbytes) + alignbytes + sizeof(mem_align_cb_t);
void *p_align_addr, *p_addr = malloc(alignedsize);
if (!p_addr)
{
return NULL;
}
p_align_addr = (void *)SDK_SIZEALIGN((uint32_t)p_addr + sizeof(mem_align_cb_t), alignbytes);
p_cb = (mem_align_cb_t *)((uint32_t)p_align_addr - 4);
p_cb->identifier = SDK_MEM_MAGIC_NUMBER;
p_cb->offset = (uint32_t)p_align_addr - (uint32_t)p_addr;
return (void *)p_align_addr;
}
void SDK_Free(void *ptr)
{
mem_align_cb_t *p_cb = (mem_align_cb_t *)((uint32_t)ptr - 4);
if (p_cb->identifier != SDK_MEM_MAGIC_NUMBER)
{
return;
}
free((void *)((uint32_t)ptr - p_cb->offset));
}
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_common.h
+585
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_flexcomm.c
+335
View File
@@ -0,0 +1,335 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_common.h"
#include "fsl_flexcomm.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.flexcomm"
#endif
/*******************************************************************************
* Prototypes
******************************************************************************/
/*! @brief Set the FLEXCOMM mode . */
static status_t FLEXCOMM_SetPeriph(FLEXCOMM_Type *base, FLEXCOMM_PERIPH_T periph, int lock);
/*! @brief check whether flexcomm supports peripheral type */
static bool FLEXCOMM_PeripheralIsPresent(FLEXCOMM_Type *base, FLEXCOMM_PERIPH_T periph);
/*******************************************************************************
* Variables
******************************************************************************/
/*! @brief Pointers to real IRQ handlers installed by drivers for each instance. */
static flexcomm_irq_handler_t s_flexcommIrqHandler[FSL_FEATURE_SOC_FLEXCOMM_COUNT];
/*! @brief Pointers to handles for each instance to provide context to interrupt routines */
static void *s_flexcommHandle[FSL_FEATURE_SOC_FLEXCOMM_COUNT];
/*! @brief Array to map FLEXCOMM instance number to IRQ number. */
IRQn_Type const kFlexcommIrqs[] = FLEXCOMM_IRQS;
/*! @brief Array to map FLEXCOMM instance number to base address. */
static const uint32_t s_flexcommBaseAddrs[FSL_FEATURE_SOC_FLEXCOMM_COUNT] = FLEXCOMM_BASE_ADDRS;
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/*! @brief IDs of clock for each FLEXCOMM module */
static const clock_ip_name_t s_flexcommClocks[] = FLEXCOMM_CLOCKS;
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
#if !(defined(FSL_FEATURE_FLEXCOMM_HAS_NO_RESET) && FSL_FEATURE_FLEXCOMM_HAS_NO_RESET)
/*! @brief Pointers to FLEXCOMM resets for each instance. */
static const reset_ip_name_t s_flexcommResets[] = FLEXCOMM_RSTS;
#endif
/*******************************************************************************
* Code
******************************************************************************/
/* check whether flexcomm supports peripheral type */
static bool FLEXCOMM_PeripheralIsPresent(FLEXCOMM_Type *base, FLEXCOMM_PERIPH_T periph)
{
if (periph == FLEXCOMM_PERIPH_NONE)
{
return true;
}
else if (periph <= FLEXCOMM_PERIPH_I2S_TX)
{
return (base->PSELID & (uint32_t)(1 << ((uint32_t)periph + 3))) > (uint32_t)0 ? true : false;
}
else if (periph == FLEXCOMM_PERIPH_I2S_RX)
{
return (base->PSELID & (1 << 7)) > (uint32_t)0 ? true : false;
}
else
{
return false;
}
}
/* Get the index corresponding to the FLEXCOMM */
/*! brief Returns instance number for FLEXCOMM module with given base address. */
uint32_t FLEXCOMM_GetInstance(void *base)
{
int i;
for (i = 0; i < FSL_FEATURE_SOC_FLEXCOMM_COUNT; i++)
{
if ((uint32_t)base == s_flexcommBaseAddrs[i])
{
return i;
}
}
assert(false);
return 0;
}
/* Changes FLEXCOMM mode */
static status_t FLEXCOMM_SetPeriph(FLEXCOMM_Type *base, FLEXCOMM_PERIPH_T periph, int lock)
{
/* Check whether peripheral type is present */
if (!FLEXCOMM_PeripheralIsPresent(base, periph))
{
return kStatus_OutOfRange;
}
/* Flexcomm is locked to different peripheral type than expected */
if ((base->PSELID & FLEXCOMM_PSELID_LOCK_MASK) && ((base->PSELID & FLEXCOMM_PSELID_PERSEL_MASK) != periph))
{
return kStatus_Fail;
}
/* Check if we are asked to lock */
if (lock)
{
base->PSELID = (uint32_t)periph | FLEXCOMM_PSELID_LOCK_MASK;
}
else
{
base->PSELID = (uint32_t)periph;
}
return kStatus_Success;
}
/*! brief Initializes FLEXCOMM and selects peripheral mode according to the second parameter. */
status_t FLEXCOMM_Init(void *base, FLEXCOMM_PERIPH_T periph)
{
int idx = FLEXCOMM_GetInstance(base);
if (idx < 0)
{
return kStatus_InvalidArgument;
}
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/* Enable the peripheral clock */
CLOCK_EnableClock(s_flexcommClocks[idx]);
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
#if !(defined(FSL_FEATURE_FLEXCOMM_HAS_NO_RESET) && FSL_FEATURE_FLEXCOMM_HAS_NO_RESET)
/* Reset the FLEXCOMM module */
RESET_PeripheralReset(s_flexcommResets[idx]);
#endif
/* Set the FLEXCOMM to given peripheral */
return FLEXCOMM_SetPeriph((FLEXCOMM_Type *)base, periph, 0);
}
/*! brief Sets IRQ handler for given FLEXCOMM module. It is used by drivers register IRQ handler according to FLEXCOMM
* mode */
void FLEXCOMM_SetIRQHandler(void *base, flexcomm_irq_handler_t handler, void *handle)
{
uint32_t instance;
/* Look up instance number */
instance = FLEXCOMM_GetInstance(base);
/* Clear handler first to avoid execution of the handler with wrong handle */
s_flexcommIrqHandler[instance] = NULL;
s_flexcommHandle[instance] = handle;
s_flexcommIrqHandler[instance] = handler;
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
/* IRQ handler functions overloading weak symbols in the startup */
#if defined(FLEXCOMM0)
void FLEXCOMM0_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[0]);
s_flexcommIrqHandler[0]((void *)s_flexcommBaseAddrs[0], s_flexcommHandle[0]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM1)
void FLEXCOMM1_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[1]);
s_flexcommIrqHandler[1]((void *)s_flexcommBaseAddrs[1], s_flexcommHandle[1]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM2)
void FLEXCOMM2_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[2]);
s_flexcommIrqHandler[2]((void *)s_flexcommBaseAddrs[2], s_flexcommHandle[2]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM3)
void FLEXCOMM3_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[3]);
s_flexcommIrqHandler[3]((void *)s_flexcommBaseAddrs[3], s_flexcommHandle[3]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM4)
void FLEXCOMM4_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[4]);
s_flexcommIrqHandler[4]((void *)s_flexcommBaseAddrs[4], s_flexcommHandle[4]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM5)
void FLEXCOMM5_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[5]);
s_flexcommIrqHandler[5]((void *)s_flexcommBaseAddrs[5], s_flexcommHandle[5]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM6)
void FLEXCOMM6_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[6]);
s_flexcommIrqHandler[6]((void *)s_flexcommBaseAddrs[6], s_flexcommHandle[6]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM7)
void FLEXCOMM7_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[7]);
s_flexcommIrqHandler[7]((void *)s_flexcommBaseAddrs[7], s_flexcommHandle[7]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM8)
void FLEXCOMM8_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[8]);
s_flexcommIrqHandler[8]((void *)s_flexcommBaseAddrs[8], s_flexcommHandle[8]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM9)
void FLEXCOMM9_DriverIRQHandler(void)
{
assert(s_flexcommIrqHandler[9]);
s_flexcommIrqHandler[9]((void *)s_flexcommBaseAddrs[9], s_flexcommHandle[9]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM14)
void FLEXCOMM14_DriverIRQHandler(void)
{
uint32_t instance;
/* Look up instance number */
instance = FLEXCOMM_GetInstance(FLEXCOMM14);
assert(s_flexcommIrqHandler[instance]);
s_flexcommIrqHandler[instance]((void *)s_flexcommBaseAddrs[instance], s_flexcommHandle[instance]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(FLEXCOMM15)
void FLEXCOMM15_DriverIRQHandler(void)
{
uint32_t instance;
/* Look up instance number */
instance = FLEXCOMM_GetInstance(FLEXCOMM14);
assert(s_flexcommIrqHandler[instance]);
s_flexcommIrqHandler[instance]((void *)s_flexcommBaseAddrs[instance], s_flexcommHandle[instance]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_flexcomm.h
+53
View File
@@ -0,0 +1,53 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FSL_FLEXCOMM_H_
#define _FSL_FLEXCOMM_H_
#include "fsl_common.h"
/*!
* @addtogroup flexcomm_driver
* @{
*/
/*! @name Driver version */
/*@{*/
/*! @brief FlexCOMM driver version 2.0.0. */
#define FSL_FLEXCOMM_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/*! @brief FLEXCOMM peripheral modes. */
typedef enum
{
FLEXCOMM_PERIPH_NONE, /*!< No peripheral */
FLEXCOMM_PERIPH_USART, /*!< USART peripheral */
FLEXCOMM_PERIPH_SPI, /*!< SPI Peripheral */
FLEXCOMM_PERIPH_I2C, /*!< I2C Peripheral */
FLEXCOMM_PERIPH_I2S_TX, /*!< I2S TX Peripheral */
FLEXCOMM_PERIPH_I2S_RX, /*!< I2S RX Peripheral */
} FLEXCOMM_PERIPH_T;
/*! @brief Typedef for interrupt handler. */
typedef void (*flexcomm_irq_handler_t)(void *base, void *handle);
/*! @brief Array with IRQ number for each FLEXCOMM module. */
extern IRQn_Type const kFlexcommIrqs[];
/*! @brief Returns instance number for FLEXCOMM module with given base address. */
uint32_t FLEXCOMM_GetInstance(void *base);
/*! @brief Initializes FLEXCOMM and selects peripheral mode according to the second parameter. */
status_t FLEXCOMM_Init(void *base, FLEXCOMM_PERIPH_T periph);
/*! @brief Sets IRQ handler for given FLEXCOMM module. It is used by drivers register IRQ handler according to FLEXCOMM
* mode */
void FLEXCOMM_SetIRQHandler(void *base, flexcomm_irq_handler_t handler, void *handle);
/*@}*/
#endif /* _FSL_FLEXCOMM_H_*/
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_gpio.c
+112
View File
@@ -0,0 +1,112 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_gpio.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.lpc_gpio"
#endif
/*******************************************************************************
* Variables
******************************************************************************/
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/*! @brief Array to map FGPIO instance number to clock name. */
static const clock_ip_name_t s_gpioClockName[] = GPIO_CLOCKS;
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
#if !(defined(FSL_FEATURE_GPIO_HAS_NO_RESET) && FSL_FEATURE_GPIO_HAS_NO_RESET)
/*! @brief Pointers to GPIO resets for each instance. */
static const reset_ip_name_t s_gpioResets[] = GPIO_RSTS_N;
#endif
/*******************************************************************************
* Prototypes
************ ******************************************************************/
/*******************************************************************************
* Code
******************************************************************************/
/*!
* brief Initializes the GPIO peripheral.
*
* This function ungates the GPIO clock.
*
* param base GPIO peripheral base pointer.
* param port GPIO port number.
*/
void GPIO_PortInit(GPIO_Type *base, uint32_t port)
{
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
assert(port < ARRAY_SIZE(s_gpioClockName));
/* Upgate the GPIO clock */
CLOCK_EnableClock(s_gpioClockName[port]);
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
#if !(defined(FSL_FEATURE_GPIO_HAS_NO_RESET) && FSL_FEATURE_GPIO_HAS_NO_RESET)
/* Reset the GPIO module */
RESET_PeripheralReset(s_gpioResets[port]);
#endif
}
/*!
* brief Initializes a GPIO pin used by the board.
*
* To initialize the GPIO, define a pin configuration, either input or output, in the user file.
* Then, call the GPIO_PinInit() function.
*
* This is an example to define an input pin or output pin configuration:
* code
* // Define a digital input pin configuration,
* gpio_pin_config_t config =
* {
* kGPIO_DigitalInput,
* 0,
* }
* //Define a digital output pin configuration,
* gpio_pin_config_t config =
* {
* kGPIO_DigitalOutput,
* 0,
* }
* endcode
*
* param base GPIO peripheral base pointer(Typically GPIO)
* param port GPIO port number
* param pin GPIO pin number
* param config GPIO pin configuration pointer
*/
void GPIO_PinInit(GPIO_Type *base, uint32_t port, uint32_t pin, const gpio_pin_config_t *config)
{
if (config->pinDirection == kGPIO_DigitalInput)
{
#if defined(FSL_FEATURE_GPIO_DIRSET_AND_DIRCLR) && (FSL_FEATURE_GPIO_DIRSET_AND_DIRCLR)
base->DIRCLR[port] = 1U << pin;
#else
base->DIR[port] &= ~(1U << pin);
#endif /*FSL_FEATURE_GPIO_DIRSET_AND_DIRCLR*/
}
else
{
/* Set default output value */
if (config->outputLogic == 0U)
{
base->CLR[port] = (1U << pin);
}
else
{
base->SET[port] = (1U << pin);
}
/* Set pin direction */
#if defined(FSL_FEATURE_GPIO_DIRSET_AND_DIRCLR) && (FSL_FEATURE_GPIO_DIRSET_AND_DIRCLR)
base->DIRSET[port] = 1U << pin;
#else
base->DIR[port] |= 1U << pin;
#endif /*FSL_FEATURE_GPIO_DIRSET_AND_DIRCLR*/
}
}
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_gpio.h
+241
View File
@@ -0,0 +1,241 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _LPC_GPIO_H_
#define _LPC_GPIO_H_
#include "fsl_common.h"
/*!
* @addtogroup lpc_gpio
* @{
*/
/*! @file */
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief LPC GPIO driver version 2.1.3. */
#define FSL_GPIO_DRIVER_VERSION (MAKE_VERSION(2, 1, 3))
/*@}*/
/*! @brief LPC GPIO direction definition */
typedef enum _gpio_pin_direction
{
kGPIO_DigitalInput = 0U, /*!< Set current pin as digital input*/
kGPIO_DigitalOutput = 1U, /*!< Set current pin as digital output*/
} gpio_pin_direction_t;
/*!
* @brief The GPIO pin configuration structure.
*
* Every pin can only be configured as either output pin or input pin at a time.
* If configured as a input pin, then leave the outputConfig unused.
*/
typedef struct _gpio_pin_config
{
gpio_pin_direction_t pinDirection; /*!< GPIO direction, input or output */
/* Output configurations, please ignore if configured as a input one */
uint8_t outputLogic; /*!< Set default output logic, no use in input */
} gpio_pin_config_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*! @name GPIO Configuration */
/*@{*/
/*!
* @brief Initializes the GPIO peripheral.
*
* This function ungates the GPIO clock.
*
* @param base GPIO peripheral base pointer.
* @param port GPIO port number.
*/
void GPIO_PortInit(GPIO_Type *base, uint32_t port);
/*!
* @brief Initializes a GPIO pin used by the board.
*
* To initialize the GPIO, define a pin configuration, either input or output, in the user file.
* Then, call the GPIO_PinInit() function.
*
* This is an example to define an input pin or output pin configuration:
* @code
* // Define a digital input pin configuration,
* gpio_pin_config_t config =
* {
* kGPIO_DigitalInput,
* 0,
* }
* //Define a digital output pin configuration,
* gpio_pin_config_t config =
* {
* kGPIO_DigitalOutput,
* 0,
* }
* @endcode
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param pin GPIO pin number
* @param config GPIO pin configuration pointer
*/
void GPIO_PinInit(GPIO_Type *base, uint32_t port, uint32_t pin, const gpio_pin_config_t *config);
/*@}*/
/*! @name GPIO Output Operations */
/*@{*/
/*!
* @brief Sets the output level of the one GPIO pin to the logic 1 or 0.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param pin GPIO pin number
* @param output GPIO pin output logic level.
* - 0: corresponding pin output low-logic level.
* - 1: corresponding pin output high-logic level.
*/
static inline void GPIO_PinWrite(GPIO_Type *base, uint32_t port, uint32_t pin, uint8_t output)
{
base->B[port][pin] = output;
}
/*@}*/
/*! @name GPIO Input Operations */
/*@{*/
/*!
* @brief Reads the current input value of the GPIO PIN.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param pin GPIO pin number
* @retval GPIO port input value
* - 0: corresponding pin input low-logic level.
* - 1: corresponding pin input high-logic level.
*/
static inline uint32_t GPIO_PinRead(GPIO_Type *base, uint32_t port, uint32_t pin)
{
return (uint32_t)base->B[port][pin];
}
/*@}*/
/*!
* @brief Sets the output level of the multiple GPIO pins to the logic 1.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param mask GPIO pin number macro
*/
static inline void GPIO_PortSet(GPIO_Type *base, uint32_t port, uint32_t mask)
{
base->SET[port] = mask;
}
/*!
* @brief Sets the output level of the multiple GPIO pins to the logic 0.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param mask GPIO pin number macro
*/
static inline void GPIO_PortClear(GPIO_Type *base, uint32_t port, uint32_t mask)
{
base->CLR[port] = mask;
}
/*!
* @brief Reverses current output logic of the multiple GPIO pins.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param mask GPIO pin number macro
*/
static inline void GPIO_PortToggle(GPIO_Type *base, uint32_t port, uint32_t mask)
{
base->NOT[port] = mask;
}
/*@}*/
/*!
* @brief Reads the current input value of the whole GPIO port.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
*/
static inline uint32_t GPIO_PortRead(GPIO_Type *base, uint32_t port)
{
return (uint32_t)base->PIN[port];
}
/*@}*/
/*! @name GPIO Mask Operations */
/*@{*/
/*!
* @brief Sets port mask, 0 - enable pin, 1 - disable pin.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param mask GPIO pin number macro
*/
static inline void GPIO_PortMaskedSet(GPIO_Type *base, uint32_t port, uint32_t mask)
{
base->MASK[port] = mask;
}
/*!
* @brief Sets the output level of the masked GPIO port. Only pins enabled by GPIO_SetPortMask() will be affected.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @param output GPIO port output value.
*/
static inline void GPIO_PortMaskedWrite(GPIO_Type *base, uint32_t port, uint32_t output)
{
base->MPIN[port] = output;
}
/*!
* @brief Reads the current input value of the masked GPIO port. Only pins enabled by GPIO_SetPortMask() will be
* affected.
*
* @param base GPIO peripheral base pointer(Typically GPIO)
* @param port GPIO port number
* @retval masked GPIO port value
*/
static inline uint32_t GPIO_PortMaskedRead(GPIO_Type *base, uint32_t port)
{
return (uint32_t)base->MPIN[port];
}
/*@}*/
#if defined(__cplusplus)
}
#endif
/*!
* @}
*/
#endif /* _LPC_GPIO_H_*/
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_iocon.h
+288
View File
@@ -0,0 +1,288 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FSL_IOCON_H_
#define _FSL_IOCON_H_
#include "fsl_common.h"
/*!
* @addtogroup lpc_iocon
* @{
*/
/*! @file */
/*******************************************************************************
* Definitions
******************************************************************************/
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.lpc_iocon"
#endif
/*! @name Driver version */
/*@{*/
/*! @brief IOCON driver version 2.0.0. */
#define FSL_IOCON_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/**
* @brief Array of IOCON pin definitions passed to IOCON_SetPinMuxing() must be in this format
*/
typedef struct _iocon_group
{
uint32_t port : 8; /* Pin port */
uint32_t pin : 8; /* Pin number */
uint32_t ionumber : 8; /* IO number */
uint32_t modefunc : 16; /* Function and mode */
} iocon_group_t;
/**
* @brief IOCON function and mode selection definitions
* @note See the User Manual for specific modes and functions supported by the various pins.
*/
#if defined(FSL_FEATURE_IOCON_FUNC_FIELD_WIDTH) && (FSL_FEATURE_IOCON_FUNC_FIELD_WIDTH == 4)
#define IOCON_FUNC0 0x0 /*!< Selects pin function 0 */
#define IOCON_FUNC1 0x1 /*!< Selects pin function 1 */
#define IOCON_FUNC2 0x2 /*!< Selects pin function 2 */
#define IOCON_FUNC3 0x3 /*!< Selects pin function 3 */
#define IOCON_FUNC4 0x4 /*!< Selects pin function 4 */
#define IOCON_FUNC5 0x5 /*!< Selects pin function 5 */
#define IOCON_FUNC6 0x6 /*!< Selects pin function 6 */
#define IOCON_FUNC7 0x7 /*!< Selects pin function 7 */
#define IOCON_FUNC8 0x8 /*!< Selects pin function 8 */
#define IOCON_FUNC9 0x9 /*!< Selects pin function 9 */
#define IOCON_FUNC10 0xA /*!< Selects pin function 10 */
#define IOCON_FUNC11 0xB /*!< Selects pin function 11 */
#define IOCON_FUNC12 0xC /*!< Selects pin function 12 */
#define IOCON_FUNC13 0xD /*!< Selects pin function 13 */
#define IOCON_FUNC14 0xE /*!< Selects pin function 14 */
#define IOCON_FUNC15 0xF /*!< Selects pin function 15 */
#if defined(IOCON_PIO_MODE_SHIFT)
#define IOCON_MODE_INACT (0x0 << IOCON_PIO_MODE_SHIFT) /*!< No addition pin function */
#define IOCON_MODE_PULLDOWN (0x1 << IOCON_PIO_MODE_SHIFT) /*!< Selects pull-down function */
#define IOCON_MODE_PULLUP (0x2 << IOCON_PIO_MODE_SHIFT) /*!< Selects pull-up function */
#define IOCON_MODE_REPEATER (0x3 << IOCON_PIO_MODE_SHIFT) /*!< Selects pin repeater function */
#endif
#if defined(IOCON_PIO_I2CSLEW_SHIFT)
#define IOCON_GPIO_MODE (0x1 << IOCON_PIO_I2CSLEW_SHIFT) /*!< GPIO Mode */
#define IOCON_I2C_SLEW (0x0 << IOCON_PIO_I2CSLEW_SHIFT) /*!< I2C Slew Rate Control */
#endif
#if defined(IOCON_PIO_EGP_SHIFT)
#define IOCON_GPIO_MODE (0x1 << IOCON_PIO_EGP_SHIFT) /*!< GPIO Mode */
#define IOCON_I2C_SLEW (0x0 << IOCON_PIO_EGP_SHIFT) /*!< I2C Slew Rate Control */
#endif
#if defined(IOCON_PIO_SLEW_SHIFT)
#define IOCON_SLEW_STANDARD (0x0 << IOCON_PIO_SLEW_SHIFT) /*!< Driver Slew Rate Control */
#define IOCON_SLEW_FAST (0x1 << IOCON_PIO_SLEW_SHIFT) /*!< Driver Slew Rate Control */
#endif
#if defined(IOCON_PIO_INVERT_SHIFT)
#define IOCON_INV_EN (0x1 << IOCON_PIO_INVERT_SHIFT) /*!< Enables invert function on input */
#endif
#if defined(IOCON_PIO_DIGIMODE_SHIFT)
#define IOCON_ANALOG_EN (0x0 << IOCON_PIO_DIGIMODE_SHIFT) /*!< Enables analog function by setting 0 to bit 7 */
#define IOCON_DIGITAL_EN \
(0x1 << IOCON_PIO_DIGIMODE_SHIFT) /*!< Enables digital function by setting 1 to bit 7(default) */
#endif
#if defined(IOCON_PIO_FILTEROFF_SHIFT)
#define IOCON_INPFILT_OFF (0x1 << IOCON_PIO_FILTEROFF_SHIFT) /*!< Input filter Off for GPIO pins */
#define IOCON_INPFILT_ON (0x0 << IOCON_PIO_FILTEROFF_SHIFT) /*!< Input filter On for GPIO pins */
#endif
#if defined(IOCON_PIO_I2CDRIVE_SHIFT)
#define IOCON_I2C_LOWDRIVER (0x0 << IOCON_PIO_I2CDRIVE_SHIFT) /*!< Low drive, Output drive sink is 4 mA */
#define IOCON_I2C_HIGHDRIVER (0x1 << IOCON_PIO_I2CDRIVE_SHIFT) /*!< High drive, Output drive sink is 20 mA */
#endif
#if defined(IOCON_PIO_OD_SHIFT)
#define IOCON_OPENDRAIN_EN (0x1 << IOCON_PIO_OD_SHIFT) /*!< Enables open-drain function */
#endif
#if defined(IOCON_PIO_I2CFILTER_SHIFT)
#define IOCON_I2CFILTER_OFF (0x1 << IOCON_PIO_I2CFILTER_SHIFT) /*!< I2C 50 ns glitch filter enabled */
#define IOCON_I2CFILTER_ON (0x0 << IOCON_PIO_I2CFILTER_SHIFT) /*!< I2C 50 ns glitch filter not enabled, */
#endif
#if defined(IOCON_PIO_ASW_SHIFT)
#define IOCON_AWS_EN (0x1 << IOCON_PIO_ASW_SHIFT) /*!< Enables analog switch function */
#endif
#if defined(IOCON_PIO_SSEL_SHIFT)
#define IOCON_SSEL_3V3 (0x0 << IOCON_PIO_SSEL_SHIFT) /*!< 3V3 signaling in I2C mode */
#define IOCON_SSEL_1V8 (0x1 << IOCON_PIO_SSEL_SHIFT) /*!< 1V8 signaling in I2C mode */
#endif
#if defined(IOCON_PIO_ECS_SHIFT)
#define IOCON_ECS_OFF (0x0 << IOCON_PIO_ECS_SHIFT) /*!< IO is an open drain cell */
#define IOCON_ECS_ON (0x1 << IOCON_PIO_ECS_SHIFT) /*!< Pull-up resistor is connected */
#endif
#if defined(IOCON_PIO_S_MODE_SHIFT)
#define IOCON_S_MODE_0CLK (0x0 << IOCON_PIO_S_MODE_SHIFT) /*!< Bypass input filter */
#define IOCON_S_MODE_1CLK \
(0x1 << IOCON_PIO_S_MODE_SHIFT) /*!< Input pulses shorter than 1 filter clock are rejected \ \ \ \ \
*/
#define IOCON_S_MODE_2CLK \
(0x2 << IOCON_PIO_S_MODE_SHIFT) /*!< Input pulses shorter than 2 filter clock2 are rejected \ \ \ \ \
*/
#define IOCON_S_MODE_3CLK \
(0x3 << IOCON_PIO_S_MODE_SHIFT) /*!< Input pulses shorter than 3 filter clock2 are rejected \ \ \ \ \
*/
#define IOCON_S_MODE(clks) ((clks) << IOCON_PIO_S_MODE_SHIFT) /*!< Select clocks for digital input filter mode */
#endif
#if defined(IOCON_PIO_CLK_DIV_SHIFT)
#define IOCON_CLKDIV(div) \
((div) \
<< IOCON_PIO_CLK_DIV_SHIFT) /*!< Select peripheral clock divider for input filter sampling clock, 2^n, n=0-6 */
#endif
#else
#define IOCON_FUNC0 0x0 /*!< Selects pin function 0 */
#define IOCON_FUNC1 0x1 /*!< Selects pin function 1 */
#define IOCON_FUNC2 0x2 /*!< Selects pin function 2 */
#define IOCON_FUNC3 0x3 /*!< Selects pin function 3 */
#define IOCON_FUNC4 0x4 /*!< Selects pin function 4 */
#define IOCON_FUNC5 0x5 /*!< Selects pin function 5 */
#define IOCON_FUNC6 0x6 /*!< Selects pin function 6 */
#define IOCON_FUNC7 0x7 /*!< Selects pin function 7 */
#if defined(IOCON_PIO_MODE_SHIFT)
#define IOCON_MODE_INACT (0x0 << IOCON_PIO_MODE_SHIFT) /*!< No addition pin function */
#define IOCON_MODE_PULLDOWN (0x1 << IOCON_PIO_MODE_SHIFT) /*!< Selects pull-down function */
#define IOCON_MODE_PULLUP (0x2 << IOCON_PIO_MODE_SHIFT) /*!< Selects pull-up function */
#define IOCON_MODE_REPEATER (0x3 << IOCON_PIO_MODE_SHIFT) /*!< Selects pin repeater function */
#endif
#if defined(IOCON_PIO_I2CSLEW_SHIFT)
#define IOCON_GPIO_MODE (0x1 << IOCON_PIO_I2CSLEW_SHIFT) /*!< GPIO Mode */
#define IOCON_I2C_SLEW (0x0 << IOCON_PIO_I2CSLEW_SHIFT) /*!< I2C Slew Rate Control */
#endif
#if defined(IOCON_PIO_EGP_SHIFT)
#define IOCON_GPIO_MODE (0x1 << IOCON_PIO_EGP_SHIFT) /*!< GPIO Mode */
#define IOCON_I2C_SLEW (0x0 << IOCON_PIO_EGP_SHIFT) /*!< I2C Slew Rate Control */
#endif
#if defined(IOCON_PIO_INVERT_SHIFT)
#define IOCON_INV_EN (0x1 << IOCON_PIO_INVERT_SHIFT) /*!< Enables invert function on input */
#endif
#if defined(IOCON_PIO_DIGIMODE_SHIFT)
#define IOCON_ANALOG_EN (0x0 << IOCON_PIO_DIGIMODE_SHIFT) /*!< Enables analog function by setting 0 to bit 7 */
#define IOCON_DIGITAL_EN \
(0x1 << IOCON_PIO_DIGIMODE_SHIFT) /*!< Enables digital function by setting 1 to bit 7(default) */
#endif
#if defined(IOCON_PIO_FILTEROFF_SHIFT)
#define IOCON_INPFILT_OFF (0x1 << IOCON_PIO_FILTEROFF_SHIFT) /*!< Input filter Off for GPIO pins */
#define IOCON_INPFILT_ON (0x0 << IOCON_PIO_FILTEROFF_SHIFT) /*!< Input filter On for GPIO pins */
#endif
#if defined(IOCON_PIO_I2CDRIVE_SHIFT)
#define IOCON_I2C_LOWDRIVER (0x0 << IOCON_PIO_I2CDRIVE_SHIFT) /*!< Low drive, Output drive sink is 4 mA */
#define IOCON_I2C_HIGHDRIVER (0x1 << IOCON_PIO_I2CDRIVE_SHIFT) /*!< High drive, Output drive sink is 20 mA */
#endif
#if defined(IOCON_PIO_OD_SHIFT)
#define IOCON_OPENDRAIN_EN (0x1 << IOCON_PIO_OD_SHIFT) /*!< Enables open-drain function */
#endif
#if defined(IOCON_PIO_I2CFILTER_SHIFT)
#define IOCON_I2CFILTER_OFF (0x1 << IOCON_PIO_I2CFILTER_SHIFT) /*!< I2C 50 ns glitch filter enabled */
#define IOCON_I2CFILTER_ON (0x0 << IOCON_PIO_I2CFILTER_SHIFT) /*!< I2C 50 ns glitch filter not enabled */
#endif
#if defined(IOCON_PIO_S_MODE_SHIFT)
#define IOCON_S_MODE_0CLK (0x0 << IOCON_PIO_S_MODE_SHIFT) /*!< Bypass input filter */
#define IOCON_S_MODE_1CLK \
(0x1 << IOCON_PIO_S_MODE_SHIFT) /*!< Input pulses shorter than 1 filter clock are rejected \ \ \ \ \
*/
#define IOCON_S_MODE_2CLK \
(0x2 << IOCON_PIO_S_MODE_SHIFT) /*!< Input pulses shorter than 2 filter clock2 are rejected \ \ \ \ \
*/
#define IOCON_S_MODE_3CLK \
(0x3 << IOCON_PIO_S_MODE_SHIFT) /*!< Input pulses shorter than 3 filter clock2 are rejected \ \ \ \ \
*/
#define IOCON_S_MODE(clks) ((clks) << IOCON_PIO_S_MODE_SHIFT) /*!< Select clocks for digital input filter mode */
#endif
#if defined(IOCON_PIO_CLK_DIV_SHIFT)
#define IOCON_CLKDIV(div) \
((div) \
<< IOCON_PIO_CLK_DIV_SHIFT) /*!< Select peripheral clock divider for input filter sampling clock, 2^n, n=0-6 */
#endif
#endif
#if defined(__cplusplus)
extern "C" {
#endif
#if (defined(FSL_FEATURE_IOCON_ONE_DIMENSION) && (FSL_FEATURE_IOCON_ONE_DIMENSION == 1))
/**
* @brief Sets I/O Control pin mux
* @param base : The base of IOCON peripheral on the chip
* @param ionumber : GPIO number to mux
* @param modefunc : OR'ed values of type IOCON_*
* @return Nothing
*/
__STATIC_INLINE void IOCON_PinMuxSet(IOCON_Type *base, uint8_t ionumber, uint32_t modefunc)
{
base->PIO[ionumber] = modefunc;
}
#else
/**
* @brief Sets I/O Control pin mux
* @param base : The base of IOCON peripheral on the chip
* @param port : GPIO port to mux
* @param pin : GPIO pin to mux
* @param modefunc : OR'ed values of type IOCON_*
* @return Nothing
*/
__STATIC_INLINE void IOCON_PinMuxSet(IOCON_Type *base, uint8_t port, uint8_t pin, uint32_t modefunc)
{
base->PIO[port][pin] = modefunc;
}
#endif
/**
* @brief Set all I/O Control pin muxing
* @param base : The base of IOCON peripheral on the chip
* @param pinArray : Pointer to array of pin mux selections
* @param arrayLength : Number of entries in pinArray
* @return Nothing
*/
__STATIC_INLINE void IOCON_SetPinMuxing(IOCON_Type *base, const iocon_group_t *pinArray, uint32_t arrayLength)
{
uint32_t i;
for (i = 0; i < arrayLength; i++)
{
#if (defined(FSL_FEATURE_IOCON_ONE_DIMENSION) && (FSL_FEATURE_IOCON_ONE_DIMENSION == 1))
IOCON_PinMuxSet(base, pinArray[i].ionumber, pinArray[i].modefunc);
#else
IOCON_PinMuxSet(base, pinArray[i].port, pinArray[i].pin, pinArray[i].modefunc);
#endif /* FSL_FEATURE_IOCON_ONE_DIMENSION */
}
}
/* @} */
#if defined(__cplusplus)
}
#endif
#endif /* _FSL_IOCON_H_ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_power.c
+19
View File
@@ -0,0 +1,19 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright (c) 2016, NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_common.h"
#include "fsl_power.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.power"
#endif
/*******************************************************************************
* Code
******************************************************************************/
/* Empty file since implementation is in header file and power library */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_power.h
+724
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_reset.c
+99
View File
@@ -0,0 +1,99 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright (c) 2016, NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_common.h"
#include "fsl_reset.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.reset"
#endif
/*******************************************************************************
* Variables
******************************************************************************/
/*******************************************************************************
* Prototypes
******************************************************************************/
/*******************************************************************************
* Code
******************************************************************************/
#if (defined(FSL_FEATURE_SOC_SYSCON_COUNT) && (FSL_FEATURE_SOC_SYSCON_COUNT > 0))
/*!
* brief Assert reset to peripheral.
*
* Asserts reset signal to specified peripheral module.
*
* param peripheral Assert reset to this peripheral. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_SetPeripheralReset(reset_ip_name_t peripheral)
{
const uint32_t regIndex = ((uint32_t)peripheral & 0xFFFF0000u) >> 16;
const uint32_t bitPos = ((uint32_t)peripheral & 0x0000FFFFu);
const uint32_t bitMask = 1u << bitPos;
assert(bitPos < 32u);
/* reset register is in SYSCON */
/* set bit */
SYSCON->PRESETCTRLSET[regIndex] = bitMask;
/* wait until it reads 0b1 */
while (0u == (SYSCON->PRESETCTRLX[regIndex] & bitMask))
{
}
}
/*!
* brief Clear reset to peripheral.
*
* Clears reset signal to specified peripheral module, allows it to operate.
*
* param peripheral Clear reset to this peripheral. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_ClearPeripheralReset(reset_ip_name_t peripheral)
{
const uint32_t regIndex = ((uint32_t)peripheral & 0xFFFF0000u) >> 16;
const uint32_t bitPos = ((uint32_t)peripheral & 0x0000FFFFu);
const uint32_t bitMask = 1u << bitPos;
assert(bitPos < 32u);
/* reset register is in SYSCON */
/* clear bit */
SYSCON->PRESETCTRLCLR[regIndex] = bitMask;
/* wait until it reads 0b0 */
while (bitMask == (SYSCON->PRESETCTRLX[regIndex] & bitMask))
{
}
}
/*!
* brief Reset peripheral module.
*
* Reset peripheral module.
*
* param peripheral Peripheral to reset. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_PeripheralReset(reset_ip_name_t peripheral)
{
RESET_SetPeripheralReset(peripheral);
RESET_ClearPeripheralReset(peripheral);
}
#endif /* FSL_FEATURE_SOC_SYSCON_COUNT || FSL_FEATURE_SOC_ASYNC_SYSCON_COUNT */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_reset.h
+281
View File
@@ -0,0 +1,281 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright (c) 2016, NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FSL_RESET_H_
#define _FSL_RESET_H_
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "fsl_device_registers.h"
/*!
* @addtogroup ksdk_common
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief reset driver version 2.0.0. */
#define FSL_RESET_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/*!
* @brief Enumeration for peripheral reset control bits
*
* Defines the enumeration for peripheral reset control bits in PRESETCTRL/ASYNCPRESETCTRL registers
*/
typedef enum _SYSCON_RSTn
{
kROM_RST_SHIFT_RSTn = 0 | 1U, /**< ROM reset control */
kSRAM1_RST_SHIFT_RSTn = 0 | 3U, /**< SRAM1 reset control */
kSRAM2_RST_SHIFT_RSTn = 0 | 4U, /**< SRAM2 reset control */
kSRAM3_RST_SHIFT_RSTn = 0 | 5U, /**< SRAM3 reset control */
kSRAM4_RST_SHIFT_RSTn = 0 | 6U, /**< SRAM4 reset control */
kFLASH_RST_SHIFT_RSTn = 0 | 7U, /**< Flash controller reset control */
kFMC_RST_SHIFT_RSTn = 0 | 8U, /**< Flash accelerator reset control */
kSPIFI_RST_SHIFT_RSTn = 0 | 10U, /**< SPIFI reset control */
kMUX0_RST_SHIFT_RSTn = 0 | 11U, /**< Input mux0 reset control */
kIOCON_RST_SHIFT_RSTn = 0 | 13U, /**< IOCON reset control */
kGPIO0_RST_SHIFT_RSTn = 0 | 14U, /**< GPIO0 reset control */
kGPIO1_RST_SHIFT_RSTn = 0 | 15U, /**< GPIO1 reset control */
kGPIO2_RST_SHIFT_RSTn = 0 | 16U, /**< GPIO2 reset control */
kGPIO3_RST_SHIFT_RSTn = 0 | 17U, /**< GPIO3 reset control */
kPINT_RST_SHIFT_RSTn = 0 | 18U, /**< Pin interrupt (PINT) reset control */
kGINT_RST_SHIFT_RSTn = 0 | 19U, /**< Grouped interrupt (PINT) reset control. */
kDMA0_RST_SHIFT_RSTn = 0 | 20U, /**< DMA reset control */
kCRC_RST_SHIFT_RSTn = 0 | 21U, /**< CRC reset control */
kWWDT_RST_SHIFT_RSTn = 0 | 22U, /**< Watchdog timer reset control */
kRTC_RST_SHIFT_RSTn = 0 | 23U, /**< RTC reset control */
kMAILBOX_RST_SHIFT_RSTn = 0 | 26U, /**< Mailbox reset control */
kADC0_RST_SHIFT_RSTn = 0 | 27U, /**< ADC0 reset control */
kMRT_RST_SHIFT_RSTn = 65536 | 0U, /**< Multi-rate timer (MRT) reset control */
kOSTIMER0_RST_SHIFT_RSTn = 65536 | 1U, /**< OSTimer0 reset control */
kSCT0_RST_SHIFT_RSTn = 65536 | 2U, /**< SCTimer/PWM 0 (SCT0) reset control */
kSCTIPU_RST_SHIFT_RSTn = 65536 | 6U, /**< SCTIPU reset control */
kUTICK_RST_SHIFT_RSTn = 65536 | 10U, /**< Micro-tick timer reset control */
kFC0_RST_SHIFT_RSTn = 65536 | 11U, /**< Flexcomm Interface 0 reset control */
kFC1_RST_SHIFT_RSTn = 65536 | 12U, /**< Flexcomm Interface 1 reset control */
kFC2_RST_SHIFT_RSTn = 65536 | 13U, /**< Flexcomm Interface 2 reset control */
kFC3_RST_SHIFT_RSTn = 65536 | 14U, /**< Flexcomm Interface 3 reset control */
kFC4_RST_SHIFT_RSTn = 65536 | 15U, /**< Flexcomm Interface 4 reset control */
kFC5_RST_SHIFT_RSTn = 65536 | 16U, /**< Flexcomm Interface 5 reset control */
kFC6_RST_SHIFT_RSTn = 65536 | 17U, /**< Flexcomm Interface 6 reset control */
kFC7_RST_SHIFT_RSTn = 65536 | 18U, /**< Flexcomm Interface 7 reset control */
kCTIMER2_RST_SHIFT_RSTn = 65536 | 22U, /**< CTimer 2 reset control */
kUSB0D_RST_SHIFT_RSTn = 65536 | 25U, /**< USB0 Device reset control */
kCTIMER0_RST_SHIFT_RSTn = 65536 | 26U, /**< CTimer 0 reset control */
kCTIMER1_RST_SHIFT_RSTn = 65536 | 27U, /**< CTimer 1 reset control */
kPVT_RST_SHIFT_RSTn = 65536 | 28U, /**< PVT reset control */
kEZHA_RST_SHIFT_RSTn = 65536 | 30U, /**< EZHA reset control */
kEZHB_RST_SHIFT_RSTn = 65536 | 31U, /**< EZHB reset control */
kDMA1_RST_SHIFT_RSTn = 131072 | 1U, /**< DMA1 reset control */
kCMP_RST_SHIFT_RSTn = 131072 | 2U, /**< CMP reset control */
kSDIO_RST_SHIFT_RSTn = 131072 | 3U, /**< SDIO reset control */
kUSB1H_RST_SHIFT_RSTn = 131072 | 4U, /**< USBHS Host reset control */
kUSB1D_RST_SHIFT_RSTn = 131072 | 5U, /**< USBHS Device reset control */
kUSB1RAM_RST_SHIFT_RSTn = 131072 | 6U, /**< USB RAM reset control */
kUSB1_RST_SHIFT_RSTn = 131072 | 7U, /**< USBHS reset control */
kFREQME_RST_SHIFT_RSTn = 131072 | 8U, /**< FREQME reset control */
kGPIO4_RST_SHIFT_RSTn = 131072 | 9U, /**< GPIO4 reset control */
kGPIO5_RST_SHIFT_RSTn = 131072 | 10U, /**< GPIO5 reset control */
kAES_RST_SHIFT_RSTn = 131072 | 11U, /**< AES reset control */
kOTP_RST_SHIFT_RSTn = 131072 | 12U, /**< OTP reset control */
kRNG_RST_SHIFT_RSTn = 131072 | 13U, /**< RNG reset control */
kMUX1_RST_SHIFT_RSTn = 131072 | 14U, /**< Input mux1 reset control */
kUSB0HMR_RST_SHIFT_RSTn = 131072 | 16U, /**< USB0HMR reset control */
kUSB0HSL_RST_SHIFT_RSTn = 131072 | 17U, /**< USB0HSL reset control */
kHASHCRYPT_RST_SHIFT_RSTn = 131072 | 18U, /**< HASHCRYPT reset control */
kPOWERQUAD_RST_SHIFT_RSTn = 131072 | 19U, /**< PowerQuad reset control */
kPLULUT_RST_SHIFT_RSTn = 131072 | 20U, /**< PLU LUT reset control */
kCTIMER3_RST_SHIFT_RSTn = 131072 | 21U, /**< CTimer 3 reset control */
kCTIMER4_RST_SHIFT_RSTn = 131072 | 22U, /**< CTimer 4 reset control */
kPUF_RST_SHIFT_RSTn = 131072 | 23U, /**< PUF reset control */
kCASPER_RST_SHIFT_RSTn = 131072 | 24U, /**< CASPER reset control */
kCAP0_RST_SHIFT_RSTn = 131072 | 25U, /**< CASPER reset control */
kOSTIMER1_RST_SHIFT_RSTn = 131072 | 26U, /**< OSTIMER1 reset control */
kANALOGCTL_RST_SHIFT_RSTn = 131072 | 27U, /**< ANALOG_CTL reset control */
kHSLSPI_RST_SHIFT_RSTn = 131072 | 28U, /**< HS LSPI reset control */
kGPIOSEC_RST_SHIFT_RSTn = 131072 | 29U, /**< GPIO Secure reset control */
kGPIOSECINT_RST_SHIFT_RSTn = 131072 | 30U, /**< GPIO Secure int reset control */
} SYSCON_RSTn_t;
/** Array initializers with peripheral reset bits **/
#define ADC_RSTS \
{ \
kADC0_RST_SHIFT_RSTn \
} /* Reset bits for ADC peripheral */
#define AES_RSTS \
{ \
kAES_RST_SHIFT_RSTn \
} /* Reset bits for AES peripheral */
#define CRC_RSTS \
{ \
kCRC_RST_SHIFT_RSTn \
} /* Reset bits for CRC peripheral */
#define CTIMER_RSTS \
{ \
kCTIMER0_RST_SHIFT_RSTn, kCTIMER1_RST_SHIFT_RSTn, kCTIMER2_RST_SHIFT_RSTn, kCTIMER3_RST_SHIFT_RSTn, \
kCTIMER4_RST_SHIFT_RSTn \
} /* Reset bits for CTIMER peripheral */
#define DMA_RSTS_N \
{ \
kDMA0_RST_SHIFT_RSTn, kDMA1_RST_SHIFT_RSTn \
} /* Reset bits for DMA peripheral */
#define FLEXCOMM_RSTS \
{ \
kFC0_RST_SHIFT_RSTn, kFC1_RST_SHIFT_RSTn, kFC2_RST_SHIFT_RSTn, kFC3_RST_SHIFT_RSTn, kFC4_RST_SHIFT_RSTn, \
kFC5_RST_SHIFT_RSTn, kFC6_RST_SHIFT_RSTn, kFC7_RST_SHIFT_RSTn, kHSLSPI_RST_SHIFT_RSTn \
} /* Reset bits for FLEXCOMM peripheral */
#define GINT_RSTS \
{ \
kGINT_RST_SHIFT_RSTn, kGINT_RST_SHIFT_RSTn \
} /* Reset bits for GINT peripheral. GINT0 & GINT1 share same slot */
#define GPIO_RSTS_N \
{ \
kGPIO0_RST_SHIFT_RSTn, kGPIO1_RST_SHIFT_RSTn, kGPIO2_RST_SHIFT_RSTn, kGPIO3_RST_SHIFT_RSTn, \
kGPIO4_RST_SHIFT_RSTn, kGPIO5_RST_SHIFT_RSTn \
} /* Reset bits for GPIO peripheral */
#define INPUTMUX_RSTS \
{ \
kMUX0_RST_SHIFT_RSTn, kMUX1_RST_SHIFT_RSTn \
} /* Reset bits for INPUTMUX peripheral */
#define IOCON_RSTS \
{ \
kIOCON_RST_SHIFT_RSTn \
} /* Reset bits for IOCON peripheral */
#define FLASH_RSTS \
{ \
kFLASH_RST_SHIFT_RSTn, kFMC_RST_SHIFT_RSTn \
} /* Reset bits for Flash peripheral */
#define MRT_RSTS \
{ \
kMRT_RST_SHIFT_RSTn \
} /* Reset bits for MRT peripheral */
#define OTP_RSTS \
{ \
kOTP_RST_SHIFT_RSTn \
} /* Reset bits for OTP peripheral */
#define PINT_RSTS \
{ \
kPINT_RST_SHIFT_RSTn \
} /* Reset bits for PINT peripheral */
#define RNG_RSTS \
{ \
kRNG_RST_SHIFT_RSTn \
} /* Reset bits for RNG peripheral */
#define SDIO_RST \
{ \
kSDIO_RST_SHIFT_RSTn \
} /* Reset bits for SDIO peripheral */
#define SCT_RSTS \
{ \
kSCT0_RST_SHIFT_RSTn \
} /* Reset bits for SCT peripheral */
#define SPIFI_RSTS \
{ \
kSPIFI_RST_SHIFT_RSTn \
} /* Reset bits for SPIFI peripheral */
#define USB0D_RST \
{ \
kUSB0D_RST_SHIFT_RSTn \
} /* Reset bits for USB0D peripheral */
#define USB0HMR_RST \
{ \
kUSB0HMR_RST_SHIFT_RSTn \
} /* Reset bits for USB0HMR peripheral */
#define USB0HSL_RST \
{ \
kUSB0HSL_RST_SHIFT_RSTn \
} /* Reset bits for USB0HSL peripheral */
#define USB1H_RST \
{ \
kUSB1H_RST_SHIFT_RSTn \
} /* Reset bits for USB1H peripheral */
#define USB1D_RST \
{ \
kUSB1D_RST_SHIFT_RSTn \
} /* Reset bits for USB1D peripheral */
#define USB1RAM_RST \
{ \
kUSB1RAM_RST_SHIFT_RSTn \
} /* Reset bits for USB1RAM peripheral */
#define UTICK_RSTS \
{ \
kUTICK_RST_SHIFT_RSTn \
} /* Reset bits for UTICK peripheral */
#define WWDT_RSTS \
{ \
kWWDT_RST_SHIFT_RSTn \
} /* Reset bits for WWDT peripheral */
#define CAPT_RSTS_N \
{ \
kCAP0_RST_SHIFT_RSTn \
} /* Reset bits for CAPT peripheral */
#define PLU_RSTS_N \
{ \
kPLULUT_RST_SHIFT_RSTn \
} /* Reset bits for PLU peripheral */
#define OSTIMER_RSTS \
{ \
kOSTIMER0_RST_SHIFT_RSTn \
} /* Reset bits for OSTIMER peripheral */
typedef SYSCON_RSTn_t reset_ip_name_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @brief Assert reset to peripheral.
*
* Asserts reset signal to specified peripheral module.
*
* @param peripheral Assert reset to this peripheral. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_SetPeripheralReset(reset_ip_name_t peripheral);
/*!
* @brief Clear reset to peripheral.
*
* Clears reset signal to specified peripheral module, allows it to operate.
*
* @param peripheral Clear reset to this peripheral. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_ClearPeripheralReset(reset_ip_name_t peripheral);
/*!
* @brief Reset peripheral module.
*
* Reset peripheral module.
*
* @param peripheral Peripheral to reset. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_PeripheralReset(reset_ip_name_t peripheral);
#if defined(__cplusplus)
}
#endif
/*! @} */
#endif /* _FSL_RESET_H_ */
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_usart.c
+918
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_usart.h
+660
View File
File diff suppressed because it is too large Load Diff
FreeRTOS/Demo/CORTEX_MPU_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/source/semihost_hardfault.c
+109
View File
@@ -0,0 +1,109 @@
// ****************************************************************************
// semihost_hardfault.c
// - Provides hard fault handler to allow semihosting code not
// to hang application when debugger not connected.
//
// ****************************************************************************
// Copyright 2017-2018 NXP
// All rights reserved.
//
// Software that is described herein is for illustrative purposes only
// which provides customers with programming information regarding the
// NXP Cortex-M based MCUs. This software is supplied "AS IS" without any
// warranties of any kind, and NXP Semiconductors and its licensor disclaim any
// and all warranties, express or implied, including all implied warranties of
// merchantability, fitness for a particular purpose and non-infringement of
// intellectual property rights. NXP Semiconductors assumes no responsibility
// or liability for the use of the software, conveys no license or rights under
// any patent, copyright, mask work right, or any other intellectual property
// rights in or to any products. NXP Semiconductors reserves the right to make
// changes in the software without notification. NXP Semiconductors also makes
// no representation or warranty that such application will be suitable for the
// specified use without further testing or modification.
//
// Permission to use, copy, modify, and distribute this software and its
// documentation is hereby granted, under NXP Semiconductors' and its
// licensor's relevant copyrights in the software, without fee, provided that it
// is used in conjunction with NXP Semiconductors microcontrollers. This
// copyright, permission, and disclaimer notice must appear in all copies of
// this code.
// ****************************************************************************
//
// ===== DESCRIPTION =====
//
// One of the issues with applications that make use of semihosting operations
// (such as printf calls) is that the code will not execute correctly when the
// debugger is not connected. Generally this will show up with the application
// appearing to just hang. This may include the application running from reset
// or powering up the board (with the application already in FLASH), and also
// as the application failing to continue to execute after a debug session is
// terminated.
//
// The problem here is that the "bottom layer" of the semihosted variants of
// the C library, semihosting is implemented by a "BKPT 0xAB" instruction.
// When the debug tools are not connected, this instruction triggers a hard
// fault - and the default hard fault handler within an application will
// typically just contains an infinite loop - causing the application to
// appear to have hang when no debugger is connected.
//
// The below code provides an example hard fault handler which instead looks
// to see what the instruction that caused the hard fault was - and if it
// was a "BKPT 0xAB", then it instead returns back to the user application.
//
// In most cases this will allow applications containing semihosting
// operations to execute (to some degree) when the debugger is not connected.
//
// == NOTE ==
//
// Correct execution of the application containing semihosted operations
// which are vectored onto this hard fault handler cannot be guaranteed. This
// is because the handler may not return data or return codes that the higher
// level C library code or application code expects. This hard fault handler
// is meant as a development aid, and it is not recommended to leave
// semihosted code in a production build of your application!
//
// ****************************************************************************
// Allow handler to be removed by setting a define (via command line)
#if !defined (__SEMIHOST_HARDFAULT_DISABLE)
__attribute__((naked))
void HardFault_Handler(void){
__asm( ".syntax unified\n"
// Check which stack is in use
"MOVS R0, #4 \n"
"MOV R1, LR \n"
"TST R0, R1 \n"
"BEQ _MSP \n"
"MRS R0, PSP \n"
"B _process \n"
"_MSP: \n"
"MRS R0, MSP \n"
// Load the instruction that triggered hard fault
"_process: \n"
"LDR R1,[R0,#24] \n"
"LDRH R2,[r1] \n"
// Semihosting instruction is "BKPT 0xAB" (0xBEAB)
"LDR R3,=0xBEAB \n"
"CMP R2,R3 \n"
"BEQ _semihost_return \n"
// Wasn't semihosting instruction so enter infinite loop
"B . \n"
// Was semihosting instruction, so adjust location to
// return to by 1 instruction (2 bytes), then exit function
"_semihost_return: \n"
"ADDS R1,#2 \n"
"STR R1,[R0,#24] \n"
// Set a return value from semihosting operation.
// 32 is slightly arbitrary, but appears to allow most
// C Library IO functions sitting on top of semihosting to
// continue to operate to some degree
"MOVS R1,#32 \n"
"STR R1,[ R0,#0 ] \n" // R0 is at location 0 on stack
// Return from hard fault handler to application
"BX LR \n"
".syntax divided\n") ;
}
#endif

Some files were not shown because too many files have changed in this diff Show More