* cpu.c: Spacing issues.
* rtems/score/cpu.h: Removed warning by setting _level.
2000-08-29 Joel Sherrill <joel.sherrill@OARcorp.com>
* Makefile.am: Added S_O_FILES to list of objects.
* rtems/score/no_cpu.h: Modified so there are fewer and
more consistent variations on "no cpu" so it is easier
to sed the source as the starting point for a new port.
<valette@crf.canon.fr> and Emmanuel Raguet <raguet@crf.canon.fr>
of Canon CRF - Communication Dept. This port includes a
basic BSP that is sufficient to link hello world.
a BSP (c4xsim) supporting the simulator included with gdb. This port
was done by Joel Sherrill and Jennifer Averett of OAR Corporation.
Also included with this port is a space/time optimization to eliminate
FP context switch management on CPUs without hardware or software FP.
An issue with this port was that sizeof(unsigned32) = sizeof(unsigned8)
on this CPU. This required addressing alignment checks and assumptions
as well as fixing code that assumed sizeof(unsigned32) == 4.
This update addresses the following:
+ the ISR enable/disable/flash macros now work with old gcc versions.
+ the UI CCR bits are now masked since other example code did so
+ _ISR_Dispatch disables interrupts during call setup
Together these removed the instabilities he was seeing.
routines and structures that require CPU model specific information
are now in libcpu. This primarily required moving erc32 specific
information from score/cpu files to libcpu/sparc and the erc32 BSP.
routines and structures that require CPU model specific information
are now in libcpu. This required significant rework of the
score/cpu header files and the creation of multiple header files
and subdirectories in libcpu/i960.
that decouples exec/ for the sh, m68k and i960 from targopts.h.
NOTE: The change to system.h is a hack to enable cpuopts.h
for some targets, but keep using targopts.h for others - I know it
does *not* work for sparc, mips, i386 and ppc. This will have
to be addressed as work continues on multilibing.
from score/cpu to libcpu because the determination of which to use is
based on RTEMS_CPU_MODEL. Thus it can not be determined based solely on
multilib information.
Hitachi H8 family. This port was done by Philip Quaife
<philip@qs.co.nz> of Q Solutions and sponsored by
Comnet Technologies Ltd. The port was done based on RTEMS 3.5.1
to a Hitach H8300H. The port was updated to RTEMS 4.5 style
Makefiles/configure by Joel Sherrill <joel@OARcorp.com>.
While doing this Joel added support for the h8300-rtems to
binutils, gcc, newlib, and gdb.
NOTE: Philip submitted a BSP for a Hitachi evaluation board
which is being merged as a separate entity.
<corsepiu@faw.uni-ulm.de> that migrates the SH port to
multilib'ing. This patch involved moving a number of
files in the CVS repository, adding new files, and
deleting files from their previous location. Ralf
gave good instructions (not repeated here) and here
are his notes:
Note 1: In this version, I did not change the installation points of
the headers which are moved inside of the source-tree. This is a
temporary hack for not breaking compatibility with 4.5 based BSPs,
but will probably not last once having real multilibs (We would have
include file conflicts when several BSPs/CPU_MODELS share a common
installation prefix).
Note 2: I hope not to have broken too much, but I would not be
astonished if something goes wrong.
Note 3: There are more patches to come :)
mpc8xx libcpu support for the first time and remove includes
of bsp.h, references to BSP_Configuration, and Cpu_table. All
of these can be obtained directly from RTEMS now.
now is an implementation of the prototypes in rtems/rtems/cache.h.
The libcpu/i386/wrapup directory is no longer needed.
The PowerPC needs this done to it.
<charles.gauthier@iit.nrc.ca>, and Darlene A. Stewart
<Darlene.Stewart@nrc.ca> to add support for a number of very
significant things:
+ BSPs for many variations on the Motorola MBX8xx board series
+ Cache Manager including initial support for m68040
and PowerPC
+ Rework of mpc8xx libcpu code so all mpc8xx CPUs now use
same code base.
+ Rework of eth_comm BSP to utiltize above.
John reports this works on the 821 and 860
linkcmds updated, simio references removed, and switch to libchip for
serial ports from simio.
Added a MEMORY_MAP file to capture information about the various
addresses on this board.
In addition, many of the beta patches are now included.
Ralf Corsepius <corsepiu@faw.uni-ulm.de> that contain:
* Modifications, (minor) corrections, cleanups to most existing
Makefile.ams
* Adds automake support to all remaining BSPs which have not yet been
converted to automake.
* Makefile.am for all remaining wrapup/Makefile.ams
<corsepiu@faw.uni-ulm.de>:
The patch below provides
* automake support for score/cpu/powerpc
* The hack to propagate values from *.cfg to automake configuration
* A fix for librdbg/powerpc/mcp750/Makefile.am (Was completely corrupted
before)
* Fixes some files which apparently where missing in
rtems-rc-19991123-rc-2.diff
* some minor configuration related patches
To apply:
rm -rf ./c/src/exec/score/cpu/powerpc/wrap
patch -p1 < rtems-rc-19991123-rc-3.diff
Attention:
c/src/exec/score/cpu/[configure.in|aclocal.m4|configure] should be
removed after applying the patch.
Modifications had been made to the score/cpu/powerpc directory after
the snapshot this was based on. In particular, the mpc750 and
other_cpu directories had been renamed to new_exception_processing
and old_exception_processing. After this patch was applied, modifications
were made to account for this.
<corsepiu@faw.uni-ulm.de>:
The patch below provides
* automake support for score/cpu/powerpc
* The hack to propagate values from *.cfg to automake configuration
* A fix for librdbg/powerpc/mcp750/Makefile.am (Was completely corrupted
before)
* Fixes some files which apparently where missing in
rtems-rc-19991123-rc-2.diff
* some minor configuration related patches
To apply:
rm -rf ./c/src/exec/score/cpu/powerpc/wrap
patch -p1 < rtems-rc-19991123-rc-3.diff
Attention:
c/src/exec/score/cpu/[configure.in|aclocal.m4|configure] should be
removed after applying the patch.
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/a29k/wrap
rm -rf c/src/exec/score/cpu/hppa1.1/wrap
rm -rf c/src/exec/score/cpu/i386/wrap
rm -rf c/src/exec/score/cpu/mips64orion/wrap
rm -rf c/src/exec/score/cpu/no_cpu/wrap
patch -p1 < rtems-rc-19991123-rc-2.diff.gz
Notes:
* I don't see a possiblity to convert the powerpc subdirectory in its
current layout to automake the time being.
* Besides the fact that this subdirectory is not in single-tree building
layout, the actual showstopper is the ifeq $(RTEMS_CPU_MODEL),mpc750)
gmake-conditional in powerpc/Makefile.in, which automake (correctly)
refuses to handle.
* The problem is *not* specific to the powerpc. Other CPUs basically
have similar problems (SH:sh7032 vs sh7045, SPARC: erc32.h in
score/cpu/sparc), but have been lucky to get around real issues (cf.
configuration files below score/cpu/sh/).
* From a configuration focused POV this problem boils down to a
file/subdirectory selection problem:
ppc: 1 or others
sh: 1 out of 2
sparc: 1 out of 1
Automake's means to implement such behavior is using conditionals to be
evaluated at configuration-time. The old configuration scheme however
used make-time conditionals. The SH port was lucky to get around this
issue because it applies a selection from a limited set of possible
selections, the powerpc however applies a selection from an unlimited
set, based on data not being available at configuration time.
* Currently I only see two general solutions:
1) make RTEMS_CPU_MODEL available at configuration time, ie. replace
make-time configuration by configuration-time configuration
2) Perform the selection at build-time, i.e. always install all files,
but use #ifdef #else #endif in source files. This is what the m68k has
exploited at other locations inside of the source-tree.
=> This directory is the last one remaining not using automake below the
whole exec/ hierarchy.
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/i960/wrap
rm -rf c/src/exec/score/cpu/m68k/wrap
rm -rf c/src/exec/score/cpu/sh/wrap
rm -rf c/src/exec/score/cpu/sparc/wrap
rm -rf c/src/exec/score/cpu/unix/wrap
patch -p1 < rtems-rc-19991123-rc-1.diff
./bootstrap
Known bugs:
* "make debug|profile" in c/src/src/score/cpu/<RTEMS_CPU/Makefile does
not handle recursion to subdirectories correctly (recurses too often).
However, this issue is hardly visible and should be tolerable for the
moment.
Joel Sherrill