The interrupt enables are used to implement a priority scheme in
bsp_interrupt_dispatch(). Enable interrupts through
bsp_interrupt_vector_enable() only if they are not already enabled to
not interfere with the priority scheme while
bsp_interrupt_vector_enable() is called during interrupt dispatching.
Besides C files for the BSP variant the patch also provides license
clarification on system_stm32h7xx.c file which is provided
in boards/stm/stm32h747i-disco directory.
The files comes from STM32CubeH7 project and references "root directory"
in its license comment and it's not clear where this points out.
Let's add clarification comment about it and also based on it
and resulting license let's add SPDX license identifier.
Sponsored-By: Precidata
Besides C files for the BSP variant the patch also provides license
clarification on system_stm32h7xx.c file which is provided
in boards/stm/stm32h757i-eval directory.
The files comes from STM32CubeH7 project and references "root directory"
in its license comment and it's not clear where this points out.
Let's add clarification comment about it and also based on it
and resulting license let's add SPDX license identifier.
Sponsored-By: Precidata
REGION_WORK may be backed by external RAM which may not be initialized
in a time we need stack to work well. E.g. code loaded in flash,
stack allocated on in-cpu SRAM and data (REGION_WORK) on external SDRAM.
Sponsored-By: Precidata
The patch merges differences in FMC configuration between system_stm32h7xx.c
file generated by STM32CubeIDE for 743i-eval2 board and the current RTEMS
ext-mem-ctl.c file.
Sponsored-By: Precidata
The changes provided here are a result of a merge from various examples
system_stm32h7xx.c files provided by STMicroelectronics for the STM32H7B3I-DK
board with the original RTEMS file provided for the STM32H743I-EVAL2 board.
A device tree binary has to be 8 byte aligned in memory. This is checked
since RTEMS commit 34052ef78c "libfdt: Add
FDT alignment check to fdt_check_header()".
Put the next character into the send buffer if the buffer is empty and
not when the last character has been sent out to the line. This improves
the performance slightly.
Before that patch, the receive path was faster than the transmit path.
Therefore a simple echo could drop characters on a busy connection.
With this patch sending and receiving has about the same performance so
that no characters are lost.
Fixes#4610
The driver didn't return with an error on (for example) a NACK on the
bus. This adds the expected error return. Due to the new case that a
transfer can be interrupted on an error, there were some new edge cases.
This patch therefore also fixes these edge cases by removing the
transfer_state that more or less duplicated the interrupt states.
Fixes#4592
Do some clean ups. Remove superfluous variables. Eliminate some overly
complex logic (information about transfer and remaining bytes has been
tracked redundantly in multiple variables).
This patch doesn't change the behavior of the driver.
Update #4592
If the system is busy with other interrupts and the UART is set to a
fast baud rate, it's possible to loose UART interrupts and therefore
characters. This allows to optionally enable a DMA for the UARTs so that
a number of lost interrupts can be tolerated.
The number of DMAs on this chip is limited and not not all applications
need that feature. Therefore the DMA is disabled by default.
Close#4578
If no extended features of the USART are used and if the comparison
feature of the UART is not used, the two modules are compatible. The
drivers were nearly identical except for some names of the defines.
This patch merges the two drivers into one.
Update #4578
Sebastian Huber
Chris Johns
Karel Gardas
Christian Mauderer
Joel Sherrill
Marcus Ritter