for the gen68360 that let it work with ELF and C++ exceptions. This
was used as the basis for changes to EVERY m68k bsp_specs and linkcmds.
Before this modification is over, the layout of the starting stack,
heap, and workspace will likely be modified for every m68k BSP. Then
they will all be very similar.
that fixes the following problems:
1. Removing bogus ';' in some configure.in (cosmetical fix)
2. Moves GAS_CODE16 checks to libbsp/i386/*/configure.in (essential fix)
#2 was responsible for the gcc/binutils-2.9.5 choking while building for
the pc386.
being set to 0 to indicate that there should be no Clock Tick. This
was used by the Timing Tests to avoid clock tick overhead perturbing
execution times. Now the Timing Tests simply leave the Clock Tick
Driver out of the Device Driver Table.
must deal with a pending process oriented signal. Prior to the addition
of this testcase, sigtimedwait() did not return properly when a process
oriented signal was pending. The problem was reported by Wayne
Bullaughey <wayneb@cacdsp.com>.
which converts the PowerPC BSPs to configuration and more automake.
* Besides adding partial automake support, rsp converting all powerpc
BSPs to make them compliant to the new configuration scheme, this patch
attempts to fix several configuration bugs in powerpc related Makefiles.
Kulpinski <jskulpin@eng01.gdds.com>, the bsp_specs now defines
USE_ENHANCED_INTR_API and powerpc/shared/include/bsp.h uses that
to enable its tm27 support.
which does the following:
* some cleanups, fixes, addtions to the libbsp automake transition
patches
* The missing Automake transistion patches all libcpu/<cpu>/<variant>/*
previously not yet been converted to automake (libcpu/powerpc,
libcpu/hppa1.1, libcpu/mips64orion, libcpu/sparc)
=> With this patch, libcpu/*/* is under full automake control.
NOTES:
* This patch is tested by building for random set of bsps affected by
this patch, but not tested for all BSPs.
* The parts of this patch related to libcpu/powerpc fix many small bugs
inside of those Makefiles.
* Have a look into libcpu/powerpc/mpc6xx/, which is in rather bad shape,
IMO. Obviously most subdirectories seem to be build but are not included
into libcpu.a by wrapup/Makefile. Addtionally, no actual BSP uses this
cpu-variant subdirectory. Furthermore libcpu/powerpc/mpc6xx has a
different directory layout than all other powerpc/<variant>/
directories.
Joel's note: I agree but the issue is that there is a conflict between
including timer or clock in libcpu/XXX/wrapup/Makefile.* and letting
a BSP specifically decide to pick it up. There is no clear solution
to this at the moment.
that converts the i386 directory to automake.
NOTE: Ralf is unable to build any i386 BSPs. This was true before and
after this patch and appears (to Joel) to be a tool issue unrelated since
others can build i386 BSPs.
that converts the m68k directory to automake.
NOTE: This one is fully tested by building *all* bsps with
../../rtems-rc-20000104/configure \
--target=m68k-rtems \
--prefix=/tmp/rtems \
--enable-cxx \
--disable-posix \
--enable-rdbg \
--disable-networking \
--enable-maintainer-mode \
--enable-multiprocessing \
--disable-tests
make
that converts the hppa1.1 directory to automake.
NOTE:
* Due to not having a toolchain (gcc refuses to build) this patch is
untested.
* I omited/deactivated the pxfl subdirectory, because I don't
understand how it supposed to work.
Joel's note: It was right to ignore the pxfl directory. It should be
removed one the BSPs are moved outside the tree. This was an old hack.
that converts the i960 directory to automake.
The same kind of libbsp configuration as for the mips64orion, now for
the i960.
In addition to libbsp configuration this patch also contains two fixes
for cvme961.cfg and rxgen960.cfg, which contained non-functional
make-exes. (Now both bsps probably have the same issues with linking c++
applications as the gensh2 has, but this is a different open issue not
tried to be solved now).
The rxgen961 also seems to have problems with its start file, because
linking apps fails due to not finding start.o. (Note that
libbsp/i960/rxgen960 lacks a start subdirectory!). I leave solving this
issue to you :)
that converts the mips64orion directory to automake.
Ralf's Note: This patch demonstrates another kind of supporting the new
style of configuration, which avoids having to port all Makefile.ins to
automake, but to keep using most old style Makefile.ins.
that converts the mips64orion directory to automake.
Ralf's Note: This patch demonstrates another kind of supporting the new
style of configuration, which avoids having to port all Makefile.ins to
automake, but to keep using most old style Makefile.ins.
that converts the unix directory to automake.
Ralf's note: Please check c/src/lib/libbsp/unix/posix/startup/Makefile.am.
I am not sure if it is correct.
that converts the sparc directory to automake.
Ralf's note: The implementation of libbsp/sparc/* gives a nearly minimal
example of the new configuration scheme.
that converts nearly all of libbsp/sh to automake. Comments follow:
1. Almost full automake support for the libbsp/sh/ subdirectories
(exception libbsp/sh/gensh*/wrapup/*)
2. Fixes for libbsp/bare/*
3. Updates to libbsp/* configuration which supports old (autoconf/deep
configuration) and new (automake/flat/cascaded configuration) style
configuration of libbsp/<cpu>/*
Jennifer Averett
Joel Sherrill