2008-08-31 Joel Sherrill <joel.sherrill@oarcorp.com>

* timer/timer.c, timer/timerisr.S: Rename timer driver methods to
	follow RTEMS programming conventions.

c/src/lib/libbsp/m68k/mvme167/ChangeLog

@@ -1,3 +1,8 @@
+2008-08-31	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* timer/timer.c, timer/timerisr.S: Rename timer driver methods to
+	follow RTEMS programming conventions.
+
 2008-08-19	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* timer/timer.c: Add missing prototypes.

c/src/lib/libbsp/m68k/mvme167/timer/timer.c

@@ -1,9 +1,9 @@
 /*  timer.c
  *
  *  This file manages the benchmark timer used by the RTEMS Timing Test Suite.
- *  Each measured time period is demarcated by calls to Timer_initialize() and
- *  Read_timer().  Read_timer() usually returns the number of microseconds
- *  since Timer_initialize() exitted.
+ *  Each measured time period is demarcated by calls to benchmark_timerinitialize() and
+ *  benchmark_timerread().  benchmark_timerread() usually returns the number of microseconds
+ *  since benchmark_timerinitialize() exitted.
  *
  *  These functions are prototyped in rtems/c/src/lib/include/timerdrv.h and
  *  must be implemented as part of the BSP.
@@ -46,7 +46,7 @@ uint32_t            Ttimer_val;
  *  in the .bss section and on that section being explicitly zeroed at boot
  *  time.
  */
-rtems_boolean       Timer_driver_Find_average_overhead;
+rtems_boolean       benchmark_timerfind_average_overhead;
 
 rtems_isr timerisr(void);
 
@@ -70,7 +70,7 @@ rtems_isr timerisr(void);
  *  boot ROM to provide a 1 MHz clock to the timers. For a 25 MHz MVME167, the
  *  prescaler value should be 0xE7 (page 2-63).
  */
-void Timer_initialize(void)
+void benchmark_timerinitialize(void)
 {
   (void) set_vector( timerisr, TIMER_VECTOR, 0 );
 
@@ -105,13 +105,13 @@ void Timer_initialize(void)
  *  LEAST_VALID is the lowest number this routine should trust.  Numbers
  *  below this are "noise" and zero is returned.
  */
-int Read_timer(void)
+int benchmark_timerread(void)
 {
   uint32_t            total;
 
   total = (Ttimer_val * TICK_INTERVAL) + lcsr->timer_cnt_1;
 
-  if ( Timer_driver_Find_average_overhead )
+  if ( benchmark_timerfind_average_overhead )
     return total;          /* in one microsecond units */
 
   if ( total < LEAST_VALID )
@@ -128,22 +128,22 @@ int Read_timer(void)
  *
  *  Output parameters:  time in microseconds
  */
-rtems_status_code Empty_function( void )
+rtems_status_code benchmark_timerempty_function( void )
 {
   return RTEMS_SUCCESSFUL;
 }
 
 /*
- *  This routine sets the Timer_driver_Find_average_overhead flag in this
+ *  This routine sets the benchmark_timerfind_average_overhead flag in this
  *  module.
  *
  *  Input parameters:  NONE
  *
  *  Output parameters:  time in microseconds
  */
-void Set_find_average_overhead(
+void benchmark_timerdisable_subtracting_average_overhead(
   rtems_boolean find_flag
 )
 {
-  Timer_driver_Find_average_overhead = find_flag;
+  benchmark_timerfind_average_overhead = find_flag;
 }

c/src/lib/libbsp/m68k/mvme167/timer/timerisr.S

@@ -2,7 +2,7 @@
  *
  *  This ISR is used to bump a count of interval "overflow" interrupts which
  *  have occurred since the timer was started. The number of overflows is taken
- *  into account in the Read_timer() routine.
+ *  into account in the benchmark_timerread() routine.
  *
  *  Input parameters:  NONE
  *

c/src/lib/libbsp/m68k/ods68302/ChangeLog

@@ -1,3 +1,8 @@
+2008-08-31	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* timer/timer.c, timer/timerisr.S: Rename timer driver methods to
+	follow RTEMS programming conventions.
+
 2008-08-19	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* startup/cpuboot.c, startup/memcheck.c, timer/timer.c:

c/src/lib/libbsp/m68k/ods68302/timer/timer.c

@@ -40,11 +40,11 @@
 
 uint32_t         Timer_interrupts;
 
-rtems_boolean Timer_driver_Find_average_overhead;
+rtems_boolean benchmark_timerfind_average_overhead;
 
 rtems_isr timerisr(void);
 
-void Timer_initialize( void )
+void benchmark_timerinitialize( void )
 {
     m302.reg.tmr2 = 0;			/* disable timer */
 
@@ -56,7 +56,7 @@ void Timer_initialize( void )
 }
 
 /*
- *  The following controls the behavior of Read_timer().
+ *  The following controls the behavior of benchmark_timerread().
  *
  *  FIND_AVG_OVERHEAD *  instructs the routine to return the "raw" count.
  *
@@ -75,7 +75,7 @@ void Timer_initialize( void )
 /*
  * Return timer value in 1/2-microsecond units
  */
-int Read_timer( void )
+int benchmark_timerread( void )
 {
   uint16_t         clicks;
   uint32_t         total;
@@ -95,7 +95,7 @@ int Read_timer( void )
 
   total = (Timer_interrupts * TRR2_VAL) + clicks;
 
-  if ( Timer_driver_Find_average_overhead == 1 )
+  if ( benchmark_timerfind_average_overhead == 1 )
     return total;          /* in XXX microsecond units */
 
   if ( total < LEAST_VALID )
@@ -113,14 +113,14 @@ int Read_timer( void )
  *  in Timing Test Suite.
  */
 
-rtems_status_code Empty_function(void)
+rtems_status_code benchmark_timerempty_function(void)
 {
     return RTEMS_SUCCESSFUL;
 }
 
-void Set_find_average_overhead(
+void benchmark_timerdisable_subtracting_average_overhead(
   rtems_boolean find_flag
 )
 {
-  Timer_driver_Find_average_overhead = find_flag;
+  benchmark_timerfind_average_overhead = find_flag;
 }

c/src/lib/libbsp/m68k/ods68302/timer/timerisr.S

@@ -4,7 +4,7 @@
  * All code in this routine is pure overhead which can perturb the
  * accuracy of RTEMS' timing test suite.
  *
- * See also:	Read_timer()
+ * See also:	benchmark_timerread()
  *
  * To reduce overhead this is best to be the "rawest" hardware interupt
  * handler you can write.  This should be the only interrupt which can