bsps/x86_64/amd64: Implement tm27 support

The BSP used the default of <rtems/tm27-default.h>, where
Cause_tm27_intr() does nothing.  Every test which calls CallWithinISR()
waited forever for an interrupt which was never raised, which stopped
five test suites.

Use the software interrupt of the BSP.  Lower_tm27_intr() only has to
enable the interrupts, because the dispatch acknowledges the interrupt
before the handler runs.

Update #5692.

Assisted-by: Claude:claude-opus-5 claude-code
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This commit is contained in:
Sebastian Huber authored and Joel Sherrill committed 2026-08-20 17:42:07 -05:00
1 parent d2974ebefc
commit 4f1d616340
1 file changed
+51 -1
+51 -1
View File
@@ -35,4 +35,54 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <rtems/tm27-default.h>
#ifndef _RTEMS_TMTEST27
#error "This is an RTEMS internal file you must not include directly."
#endif
#ifndef __tm27_h
#define __tm27_h
#include <bsp/irq.h>
#include <rtems/score/idt.h>
#include <rtems/score/isr.h>
#define MUST_WAIT_FOR_INTERRUPT 1
#define TM27_INTERRUPT_VECTOR_DEFAULT BSP_VECTOR_SOFTWARE
static rtems_interrupt_entry amd64_tm27_interrupt_entry;
static inline void Install_tm27_vector( rtems_interrupt_handler handler )
{
rtems_interrupt_entry_initialize(
&amd64_tm27_interrupt_entry,
handler,
NULL,
"tm27"
);
(void) rtems_interrupt_entry_install(
BSP_VECTOR_SOFTWARE,
RTEMS_INTERRUPT_SHARED,
&amd64_tm27_interrupt_entry
);
}
static inline void Cause_tm27_intr( void )
{
(void) rtems_interrupt_raise( BSP_VECTOR_SOFTWARE );
}
/*
* The Local APIC clears the interrupt request bit when the processor
* acknowledges the interrupt, so there is nothing left to clear.
*/
static inline void Clear_tm27_intr( void )
{
}
static inline void Lower_tm27_intr( void )
{
_ISR_Set_level( 0 );
}
#endif /* __tm27_h */