Files
rt-thread/libcpu/risc-v/common64
GUIandseteiro 8d8dc96b67 [ARCH/RISC-V] Next RISC-V (#10320)
* [libcpu][risc-v] Refactor the RISC-V architecture port

Introduce an opt-in unified RISC-V common layer for RV32 and RV64 while keeping existing BSPs on the legacy implementation during migration.

- use ARCH_RISCV and ARCH_CPU_64BIT for architecture and XLEN selection
- unify context, trap, MMU, cache, timer, SBI, SMP and ISA handling
- add PLIC, CLIC, ACLINT, APLIC and IMSIC support
- map physical hart IDs to contiguous logical CPU IDs
- add T-Head vendor overrides while preserving legacy ports
- migrate qemu-virt64-riscv with RV32 and RV64 support
- update clock_time, MM, LWP, OFW, PCI and Rust integration

Existing BSPs continue using legacy_common or common64 unless they select RT_USING_RISCV_NEW_COMMON.

Signed-off-by: GuEe-GUI <2991707448@qq.com>

* [libcpu][risc-v] skip disabled CPU nodes in early FDT walk

Rbb666 noted that rt_hw_fdt_install_early() walked every /cpus child
without checking status, so disabled cores still joined hart registration
and MMU capability probing. Skip nodes that are not okay/ok via
rt_fdt_device_is_available() before reading reg or mmu-type.

Signed-off-by: seteiro <chenmoushun@163.com>

* [libcpu][risc-v] Fix per-CPU page table mapping

- reuse existing non-leaf page table entries when mapping per-CPU areas
- reject leaf entry conflicts instead of overwriting mappings

Signed-off-by: GuEe-GUI <2991707448@qq.com>

---------

Signed-off-by: GuEe-GUI <2991707448@qq.com>
Signed-off-by: seteiro <chenmoushun@163.com>
Co-authored-by: seteiro <chenmoushun@163.com>
2026-10-17 09:44:26 +08:00
..
…
2026-10-17 09:44:26 +08:00
…
…
…
2026-10-17 09:44:26 +08:00
…
…

RT-Thread RV64支持

1.概述

该目录提供RT-Thread标准版及SMART版本对rv64体系结构支持,其中包括:

文件名 文件内容 参考标准
atomic_rv64.c 原子操作实现接口 "A" Extension for Atomic Instructions, Version 2.1
context_gcc.S 线程上下文切换 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
cpuport_gcc.S 线程统一入口
cpuport.c 线程栈初始化
cpuport.h 通用寄存器、浮点、向量寄存器个数定义,内存屏障接口 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
interrupt_gcc.S 异常/中断处理、全局中断使能/关闭 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
io.h 以字节、字、双字读、写IO地址接口
encoding.h CSR寄存器定义 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
vector_encoding.h vector相关指令定义 RISC-V "V" Standard Extension for Vector Operations, Version 1.0
ext_context.h 浮点/向量上下文保存与恢复 RISC-V "V" Standard Extension for Vector Operations, Version 1.0 "F" Extension for Single-Precision Floating-Point Version 2.2
mmu.c rv64 sv39 mmu管理接口 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
mmu.h rv64 sv39 mmu页表相关定义 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
asid.c rv64 mmu asid支持 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
riscv_mmu.c 使能/关闭S态访问用户态页表 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
sbi.c 通过ecall调用SBI相关信息接口 RISC-V Supervisor Binary Interface Specification Version 1.0
sbi.h SBI spec相关接口定义 RISC-V Supervisor Binary Interface Specification Version 1.0
stack.h 线程栈数据定义 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
stackframe.h 线程上下文保存/恢复 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
syscall_c.c 系统调用处理
tick.c S态时钟初始化及中断处理
tlb.h tlb刷新/无效接口 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12
trap.c 异常/中断处理,包括中断分发及用户态异常处理 The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12

2.运行模式配置

选项 默认值 说明
RISCV_VIRT64_S_MODE 打开 系统启动后是否运行在S态,关闭时系统将运行在M态;目前系统存在bug尚不可直接运行在M态,故此开关必须打开
RT_USING_SMART 关闭 是否开启RTThread SMART版本,开启后系统运行在S+U态,且会开启MMU页表(satp);关闭时系统仅运行在S态,MMU关闭(satp为bare translation)
ARCH_USING_ASID 关闭 MMU是否支持asid

3.移植指南

(1)增加新的CPU支持

创建libcpu/risc-v/<VENDOR_NAME>/<CPU_NAME>新目录,同时在libcpu/risc-v/SConscript中增加该CPU。

(2)PLIC中断控制器支持

PLIC 驱动请参考 libcpu/risc-v/common/pic/pic-sifive-plic.c。

(3)串口uart支持

目前串口驱动在各 BSP 目录下,可参考 bsp/allwinner/libraries/drivers/drv_uart.c。