mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2026-11-16 01:05:15 +08:00
* [libcpu][risc-v] Refactor the RISC-V architecture port Introduce an opt-in unified RISC-V common layer for RV32 and RV64 while keeping existing BSPs on the legacy implementation during migration. - use ARCH_RISCV and ARCH_CPU_64BIT for architecture and XLEN selection - unify context, trap, MMU, cache, timer, SBI, SMP and ISA handling - add PLIC, CLIC, ACLINT, APLIC and IMSIC support - map physical hart IDs to contiguous logical CPU IDs - add T-Head vendor overrides while preserving legacy ports - migrate qemu-virt64-riscv with RV32 and RV64 support - update clock_time, MM, LWP, OFW, PCI and Rust integration Existing BSPs continue using legacy_common or common64 unless they select RT_USING_RISCV_NEW_COMMON. Signed-off-by: GuEe-GUI <2991707448@qq.com> * [libcpu][risc-v] skip disabled CPU nodes in early FDT walk Rbb666 noted that rt_hw_fdt_install_early() walked every /cpus child without checking status, so disabled cores still joined hart registration and MMU capability probing. Skip nodes that are not okay/ok via rt_fdt_device_is_available() before reading reg or mmu-type. Signed-off-by: seteiro <chenmoushun@163.com> * [libcpu][risc-v] Fix per-CPU page table mapping - reuse existing non-leaf page table entries when mapping per-CPU areas - reject leaf entry conflicts instead of overwriting mappings Signed-off-by: GuEe-GUI <2991707448@qq.com> --------- Signed-off-by: GuEe-GUI <2991707448@qq.com> Signed-off-by: seteiro <chenmoushun@163.com> Co-authored-by: seteiro <chenmoushun@163.com>
RT-Thread RV64支持
1.概述
该目录提供RT-Thread标准版及SMART版本对rv64体系结构支持,其中包括:
| 文件名 | 文件内容 | 参考标准 |
|---|---|---|
| atomic_rv64.c | 原子操作实现接口 | "A" Extension for Atomic Instructions, Version 2.1 |
| context_gcc.S | 线程上下文切换 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| cpuport_gcc.S | 线程统一入口 | |
| cpuport.c | 线程栈初始化 | |
| cpuport.h | 通用寄存器、浮点、向量寄存器个数定义,内存屏障接口 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| interrupt_gcc.S | 异常/中断处理、全局中断使能/关闭 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| io.h | 以字节、字、双字读、写IO地址接口 | |
| encoding.h | CSR寄存器定义 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| vector_encoding.h | vector相关指令定义 | RISC-V "V" Standard Extension for Vector Operations, Version 1.0 |
| ext_context.h | 浮点/向量上下文保存与恢复 | RISC-V "V" Standard Extension for Vector Operations, Version 1.0 "F" Extension for Single-Precision Floating-Point Version 2.2 |
| mmu.c | rv64 sv39 mmu管理接口 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| mmu.h | rv64 sv39 mmu页表相关定义 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| asid.c | rv64 mmu asid支持 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| riscv_mmu.c | 使能/关闭S态访问用户态页表 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| sbi.c | 通过ecall调用SBI相关信息接口 | RISC-V Supervisor Binary Interface Specification Version 1.0 |
| sbi.h | SBI spec相关接口定义 | RISC-V Supervisor Binary Interface Specification Version 1.0 |
| stack.h | 线程栈数据定义 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| stackframe.h | 线程上下文保存/恢复 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| syscall_c.c | 系统调用处理 | |
| tick.c | S态时钟初始化及中断处理 | |
| tlb.h | tlb刷新/无效接口 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
| trap.c | 异常/中断处理,包括中断分发及用户态异常处理 | The RISC-V Instruction Set Manual Volume II: privileged supervisor-level ISA version 1.12 |
2.运行模式配置
| 选项 | 默认值 | 说明 |
|---|---|---|
| RISCV_VIRT64_S_MODE | 打开 | 系统启动后是否运行在S态,关闭时系统将运行在M态;目前系统存在bug尚不可直接运行在M态,故此开关必须打开 |
| RT_USING_SMART | 关闭 | 是否开启RTThread SMART版本,开启后系统运行在S+U态,且会开启MMU页表(satp);关闭时系统仅运行在S态,MMU关闭(satp为bare translation) |
| ARCH_USING_ASID | 关闭 | MMU是否支持asid |
3.移植指南
(1)增加新的CPU支持
创建libcpu/risc-v/<VENDOR_NAME>/<CPU_NAME>新目录,同时在libcpu/risc-v/SConscript中增加该CPU。
(2)PLIC中断控制器支持
PLIC 驱动请参考 libcpu/risc-v/common/pic/pic-sifive-plic.c。
(3)串口uart支持
目前串口驱动在各 BSP 目录下,可参考
bsp/allwinner/libraries/drivers/drv_uart.c。