Add rt_bus_probe_device() to retry driver matching for a registered
but unbound device. Use it when an OFW-created platform device
is requested again, while preserving native-bus ownership
for I2C, SPI, and other non-platform devices.
Also instantiate eligible child platform devices after a parent node is registered.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
add serial v2 RX DMA event mode configuration for DMA-enabled builds
support STM32 UART RX DMA half/full transfer interrupt policy selection
validate RX DMA event mode before applying serial configuration
restore serial configuration when backend configure fails
1. Support DVFS and finsh cmd, there are 6 governors:
- conservative
- freedom
- performance
- powersave
- schedutil
2. Support DVFS for SCMI.
3. Port the Cooling device for DVFS.
4. Port the PM with DVFS.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
1. version for v1.2
2. support packed queue
1. support MMIO/PCI over bus
2. new virtio queue api with dma/cpu sync
3. update for virtio device drivers:
- net
- block
- console
- input
- gpu
4. new virtio device drivers:
- 9p
- crypto
- rng
- scmi
- scsi
Signed-off-by: GuEe-GUI <2991707448@qq.com>
RT-Thread BSP Static Build Check / 🔍 Summary of Git Diff Changes (push) Has been cancelled
RT-Thread BSP Static Build Check / ${{ matrix.legs.RTT_BSP }} (push) Has been cancelled
RT-Thread BSP Static Build Check / collect-artifacts (push) Has been cancelled
doc_doxygen / doxygen_doc generate (push) Has been cancelled
doc_doxygen / deploy (push) Has been cancelled
pkgs_test / change (push) Has been cancelled
utest_auto_run / A9 :components/dfs.cfg (push) Has been cancelled
utest_auto_run / A9 :components/lwip.cfg (push) Has been cancelled
utest_auto_run / A9 :components/netdev.cfg (push) Has been cancelled
utest_auto_run / A9 :components/sal.cfg (push) Has been cancelled
utest_auto_run / A9 :cpp11/cpp11.cfg (push) Has been cancelled
utest_auto_run / AARCH64-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / A9-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / RISCV-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / XUANTIE-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / AARCH64 :default.cfg (push) Has been cancelled
utest_auto_run / AARCH64-smp :default.cfg (push) Has been cancelled
utest_auto_run / A9 :default.cfg (push) Has been cancelled
utest_auto_run / A9-smp :default.cfg (push) Has been cancelled
utest_auto_run / RISCV :default.cfg (push) Has been cancelled
utest_auto_run / RISCV-smp :default.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / RISCV :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/ipc.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/kernel_basic.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/mem.cfg (push) Has been cancelled
- add msh commands to inspect/operate power supplies and regulators
- expose snapshot/name helpers so shells and daemons can enumerate nodes safely
- add current support for regulator
- relax DM-only constraints in power/regulator stacks so basic builds work without DM/OFW
- solve the problem of enabling counting for regulator
RT-Thread BSP Static Build Check / 🔍 Summary of Git Diff Changes (push) Has been cancelled
RT-Thread BSP Static Build Check / ${{ matrix.legs.RTT_BSP }} (push) Has been cancelled
RT-Thread BSP Static Build Check / collect-artifacts (push) Has been cancelled
doc_doxygen / doxygen_doc generate (push) Has been cancelled
doc_doxygen / deploy (push) Has been cancelled
pkgs_test / change (push) Has been cancelled
utest_auto_run / A9 :components/dfs.cfg (push) Has been cancelled
utest_auto_run / A9 :components/lwip.cfg (push) Has been cancelled
utest_auto_run / A9 :components/netdev.cfg (push) Has been cancelled
utest_auto_run / A9 :components/sal.cfg (push) Has been cancelled
utest_auto_run / A9 :cpp11/cpp11.cfg (push) Has been cancelled
utest_auto_run / AARCH64-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / A9-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / RISCV-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / XUANTIE-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / AARCH64 :default.cfg (push) Has been cancelled
utest_auto_run / AARCH64-smp :default.cfg (push) Has been cancelled
utest_auto_run / A9 :default.cfg (push) Has been cancelled
utest_auto_run / A9-smp :default.cfg (push) Has been cancelled
utest_auto_run / RISCV :default.cfg (push) Has been cancelled
utest_auto_run / RISCV-smp :default.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / RISCV :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/ipc.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/kernel_basic.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/mem.cfg (push) Has been cancelled
ToolsCI / Tools (push) Has been cancelled
Weekly CI Scheduler / Trigger and Monitor CIs (push) Has been cancelled
Weekly CI Scheduler / Create Discussion Report (push) Has been cancelled
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
The old CLK is can't link all hardware clock cell in system that the
API of layout such as 'set_parent' can't work as expected.
Some hareware clock cell need some flags to prevent some dangerous behaviors, eg:
When a clock cell is link to the PMU, the SoC will power-down if the cell is
disable.
The new CLK can do it, and make the CLK drivers implemented easier from
TRM/DataSheet.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
Hardware spinlock modules provide hardware assistance for
synchronization and mutual exclusion between heterogeneous processors
and those not operating under a single, shared operating system.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [DM][MISC] Make Kconfig(ADC/PWM) import for DM
* [Driver][MISC][ADC] Fixup ADC
1. Fixup error no.
2. Fixup type of control for args.
3. Fixup value no init.
* [Driver][MISC][PWM] Enable `rt_pwm_get` API
Signed-off-by: GuEe-GUI <2991707448@qq.com>
1. Add get id match data API.
2. Set I2C device name default before adding to bus.
3. Add Kconfig import for DM.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
1. Fixup RT_DIV_ROUND_DOWN_ULL and RT_DIV_ROUND_UP_ULL, rt_do_div.
2. Support RT_DIV_ROUND_CLOSEST_ULL.
3. Make new DIV API.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* Append WT attribute.
* Change the API with pool size only.
* Add address mask for DMA
* Change DMA lock to mutex
* Add pause callback for DMA engine driver
* Add DMA Engine test
* Add ARM PL330 DMA Engine driver
RT-Thread BSP Static Build Check / 🔍 Summary of Git Diff Changes (push) Has been cancelled
doc_doxygen / doxygen_doc generate (push) Has been cancelled
pkgs_test / change (push) Has been cancelled
utest_auto_run / A9 :components/dfs.cfg (push) Has been cancelled
utest_auto_run / A9 :components/lwip.cfg (push) Has been cancelled
utest_auto_run / A9 :components/netdev.cfg (push) Has been cancelled
utest_auto_run / A9 :components/sal.cfg (push) Has been cancelled
utest_auto_run / A9 :cpp11/cpp11.cfg (push) Has been cancelled
utest_auto_run / AARCH64-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / A9-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / RISCV-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / XUANTIE-rtsmart :default.cfg (push) Has been cancelled
utest_auto_run / AARCH64 :default.cfg (push) Has been cancelled
utest_auto_run / A9 :default.cfg (push) Has been cancelled
utest_auto_run / A9-smp :default.cfg (push) Has been cancelled
utest_auto_run / RISCV :default.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / RISCV :kernel/atomic_c11.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/ipc.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/kernel_basic.cfg (push) Has been cancelled
utest_auto_run / A9 :kernel/mem.cfg (push) Has been cancelled
RT-Thread BSP Static Build Check / ${{ matrix.legs.RTT_BSP }} (push) Has been cancelled
RT-Thread BSP Static Build Check / collect-artifacts (push) Has been cancelled
doc_doxygen / deploy (push) Has been cancelled
Weekly CI Scheduler / Trigger and Monitor CIs (push) Has been cancelled
Weekly CI Scheduler / Create Discussion Report (push) Has been cancelled
Setting the send status flag `sndchange` after calling the can->ops->sendmsg function
could lead to a race condition if a transmission timeout occurs, resulting in incorrect state handling.
This patch moves the operation of setting the `sndchange` flag to before the call to can->ops->sendmsg.
This ensures that the mailbox's status is correctly marked as "sending" before the hardware begins transmission,
making the driver's state management more robust and reliable, especially in handling exceptions like timeouts.
Additionally, new macros for CAN filter modes have been added in dev_can.h.
* doxygen: remove @return command if function return void
When doxygen is upgraded to v1.9.8 (on ubuntu 24.04), doxygen
reports: "doxygen error: found documented return type for xxx
that does not return anything" for those functions which return
void but declare "@return" in doxygen comment.
Solution: remove "@return" for those cases, and update
guide document for how to write doxgen comment for functions.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* doxygen: fixed a minor typo for uart doc
This error is found when building with doxygen 1.9.8, but not
detecetd on 1.9.1.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
GUI
GuEe-GUI
mnikapl954
wdfk-prog
Guorui Li
Evlers
Shaun
Damon
Bernard Xiong
Chen Wang