bsp/stm32：Separate STM32F2 HAL drivers (#10210)

2026-10-02 14:23:19 +08:00 · 2025-04-22 22:50:29 +08:00
parent c7c8d9d6ef
commit e347305ad0
180 changed files with 497 additions and 227948 deletions
@@ -17,6 +17,7 @@ config SOC_SERIES_STM32F2
    bool
    select ARCH_ARM_CORTEX_M3
    select SOC_FAMILY_STM32
+    select PKG_USING_STM32F2_HAL_DRIVER

 config SOC_SERIES_STM32F3
    bool
@@ -1,191 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f2xx.h
-  * @author  MCD Application Team
-  * @brief   CMSIS STM32F2xx Device Peripheral Access Layer Header File. 
-  *
-  *          The file is the unique include file that the application programmer
-  *          is using in the C source code, usually in main.c. This file contains:
-  *           - Configuration section that allows to select:
-  *              - The STM32F2xx device used in the target application
-  *              - To use or not the peripheral’s drivers in application code(i.e. 
-  *                code will be based on direct access to peripheral’s registers 
-  *                rather than drivers API), this option is controlled by 
-  *                "#define USE_HAL_DRIVER"
-  *  
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f2xx
-  * @{
-  */
-    
-#ifndef __STM32F2xx_H
-#define __STM32F2xx_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-   
-/** @addtogroup Library_configuration_section
-  * @{
-  */
-
-/**
-  * @brief STM32 Family
-  */
-#if !defined (STM32F2)
-#define STM32F2
-#endif /* STM32F2 */
-   
-/* Uncomment the line below according to the target STM32 device used in your
-   application 
-  */
-#if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx)
-
-  /* #define STM32F205xx */   /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF,
-                                   STM32F205RE, STM32F205VE, STM32F205ZE, STM32F205RC, STM32F205VC, STM32F205ZC,
-                                   STM32F205RB and STM32F205VB Devices */
-  /* #define STM32F215xx */   /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */
-  /* #define STM32F207xx */   /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF,
-                                   STM32F207VE, STM32F207ZE, STM32F207IE, STM32F207VC, STM32F207ZC and STM32F207IC Devices */
-  /* #define STM32F217xx */   /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */
-    
-#endif
-   
-/*  Tip: To avoid modifying this file each time you need to switch between these
-        devices, you can define the device in your toolchain compiler preprocessor.
-  */
-#if !defined  (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
-   In this case, these drivers will not be included and the application code will 
-   be based on direct access to peripherals registers 
-   */
-  /*#define USE_HAL_DRIVER */
-#endif /* USE_HAL_DRIVER */
-
-/**
-  * @brief CMSIS Device version number V2.2.5
-  */
-#define __STM32F2xx_CMSIS_VERSION_MAIN   (0x02U) /*!< [31:24] main version */
-#define __STM32F2xx_CMSIS_VERSION_SUB1   (0x02U) /*!< [23:16] sub1 version */
-#define __STM32F2xx_CMSIS_VERSION_SUB2   (0x05U) /*!< [15:8]  sub2 version */
-#define __STM32F2xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
-#define __STM32F2xx_CMSIS_VERSION        ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\
-                                         |(__STM32F2xx_CMSIS_VERSION_SUB1 << 16)\
-                                         |(__STM32F2xx_CMSIS_VERSION_SUB2 << 8 )\
-                                         |(__STM32F2xx_CMSIS_VERSION))
-
-/**
-  * @}
-  */
-
-/** @addtogroup Device_Included
-  * @{
-  */
-
-#if defined(STM32F205xx)
-  #include "stm32f205xx.h"
-#elif defined(STM32F215xx)
-  #include "stm32f215xx.h"
-#elif defined(STM32F207xx)
-  #include "stm32f207xx.h"
-#elif defined(STM32F217xx)
-  #include "stm32f217xx.h"
-#else
- #error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)"
-#endif
-
-/**
-  * @}
-  */
-
-/** @addtogroup Exported_types
-  * @{
-  */ 
-typedef enum 
-{
-  RESET = 0U, 
-  SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum 
-{
-  DISABLE = 0U, 
-  ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum 
-{
-  SUCCESS = 0U,
-  ERROR = !SUCCESS
-} ErrorStatus;
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup Exported_macro
-  * @{
-  */
-#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT)    ((REG) & (BIT))
-
-#define CLEAR_REG(REG)        ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
-
-#define READ_REG(REG)         ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
-
-
-/**
-  * @}
-  */
-  
-#if defined (USE_HAL_DRIVER)
- #include "stm32f2xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32F2xx_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,106 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32f2xx.h
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-M3 Device System Source File for STM32F2xx devices.
-  ****************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f2xx_system
-  * @{
-  */  
-  
-/**
-  * @brief Define to prevent recursive inclusion
-  */
-#ifndef __SYSTEM_STM32F2XX_H
-#define __SYSTEM_STM32F2XX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/** @addtogroup STM32F2xx_System_Includes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup STM32F2xx_System_Exported_types
-  * @{
-  */
-  /* This variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
-extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
-
-extern const uint8_t  AHBPrescTable[16];    /*!< AHB prescalers table values */
-extern const uint8_t  APBPrescTable[8];     /*!< APB prescalers table values */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F2xx_System_Exported_Constants
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F2xx_System_Exported_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F2xx_System_Exported_Functions
-  * @{
-  */
-  
-extern void SystemInit(void);
-extern void SystemCoreClockUpdate(void);
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__SYSTEM_STM32F2XX_H */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */  
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x08000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x080FFFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x20020000;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x20000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x2000FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x2001FFFF;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x08000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x080FFFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x20020000;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x20000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x2000FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x2001FFFF;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x08000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x080FFFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x20020000;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x20000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x2000FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x2001FFFF;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x08000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x080FFFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x20020000;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x20000000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x2000FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x2001FFFF;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x000;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
@@ -1,86 +0,0 @@
-import rtconfig
-from building import *
-
-# get current directory
-cwd = GetCurrentDir()
-
-# The set of source files associated with this SConscript file.
-src = Split("""
-CMSIS/Device/ST/STM32F2xx/Source/Templates/system_stm32f2xx.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_dma.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_cortex.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_crc.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pwr.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rcc.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rcc_ex.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_sram.c
-STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_gpio.c
-""")
-
-if GetDepend(['RT_USING_SERIAL']) or GetDepend(['RT_USING_NANO', 'RT_USING_CONSOLE']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_uart.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_usart.c']
-
-if GetDepend(['RT_USING_I2C']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_i2c.c']
-
-if GetDepend(['RT_USING_SPI']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_spi.c']
-
-if GetDepend(['RT_USING_USB']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pccard.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pcd.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pcd_ex.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_ll_usb.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_hcd.c']
-
-if GetDepend(['RT_USING_CAN']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_can.c']
-
-if GetDepend(['RT_USING_HWTIMER']) or GetDepend(['RT_USING_PWM']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_tim.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_tim_ex.c']
-
-if GetDepend(['BSP_USING_ETH']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_eth.c']
-
-if GetDepend(['RT_USING_ADC']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_adc.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_adc_ex.c']
-
-if GetDepend(['RT_USING_RTC']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rtc.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rtc_ex.c']
-
-if GetDepend(['RT_USING_WDT']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_iwdg.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_wwdg.c']
-
-if GetDepend(['RT_USING_SDIO']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_mmc.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_sd.c']
-
-if GetDepend(['RT_USING_AUDIO']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_i2s.c']
-
-if GetDepend(['RT_USING_MTD_NOR']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_nor.c']
-
-if GetDepend(['RT_USING_MTD_NAND']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_nand.c']
-
-if GetDepend(['BSP_USING_EXT_FMC_IO']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_sram.c']
-
-if GetDepend(['BSP_USING_ON_CHIP_FLASH']):
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_flash.c']
-    src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_flash_ex.c']
-
-path = [cwd + '/CMSIS/Device/ST/STM32F2xx/Include',
-    cwd + '/STM32F2xx_HAL_Driver/Inc']
-
-CPPDEFINES = ['USE_HAL_DRIVER']
-group = DefineGroup('Libraries', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
-
-Return('group')
@@ -1,57 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32_assert.h
-  * @author  MCD Application Team
-  * @brief   STM32 assert template file.
-  *          This file should be copied to the application folder and renamed
-  *          to stm32_assert.h.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32_ASSERT_H
-#define __STM32_ASSERT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Includes ------------------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32_ASSERT_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,184 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f2xx_hal_crc.h
-  * @author  MCD Application Team
-  * @brief   Header file of CRC HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F2xx_HAL_CRC_H
-#define STM32F2xx_HAL_CRC_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f2xx_hal_def.h"
-
-/** @addtogroup STM32F2xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup CRC
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup CRC_Exported_Types CRC Exported Types
-  * @{
-  */
-
-/**
-  * @brief  CRC HAL State Structure definition
-  */
-typedef enum
-{
-  HAL_CRC_STATE_RESET     = 0x00U,  /*!< CRC not yet initialized or disabled */
-  HAL_CRC_STATE_READY     = 0x01U,  /*!< CRC initialized and ready for use   */
-  HAL_CRC_STATE_BUSY      = 0x02U,  /*!< CRC internal process is ongoing     */
-  HAL_CRC_STATE_TIMEOUT   = 0x03U,  /*!< CRC timeout state                   */
-  HAL_CRC_STATE_ERROR     = 0x04U   /*!< CRC error state                     */
-} HAL_CRC_StateTypeDef;
-
-
-/**
-  * @brief  CRC Handle Structure definition
-  */
-typedef struct
-{
-  CRC_TypeDef                 *Instance;   /*!< Register base address        */
-
-  HAL_LockTypeDef             Lock;        /*!< CRC Locking object           */
-
-  __IO HAL_CRC_StateTypeDef   State;       /*!< CRC communication state      */
-
-} CRC_HandleTypeDef;
-/**
-  * @}
-  */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup CRC_Exported_Constants CRC Exported Constants
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup CRC_Exported_Macros CRC Exported Macros
-  * @{
-  */
-
-/** @brief Reset CRC handle state.
-  * @param  __HANDLE__ CRC handle.
-  * @retval None
-  */
-#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
-
-/**
-  * @brief  Reset CRC Data Register.
-  * @param  __HANDLE__ CRC handle
-  * @retval None
-  */
-#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
-
-/**
-  * @brief Store data in the Independent Data (ID) register.
-  * @param __HANDLE__ CRC handle
-  * @param __VALUE__  Value to be stored in the ID register
-  * @note  Refer to the Reference Manual to get the authorized __VALUE__ length in bits
-  * @retval None
-  */
-#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
-
-/**
-  * @brief Return the data stored in the Independent Data (ID) register.
-  * @param __HANDLE__ CRC handle
-  * @note  Refer to the Reference Manual to get the authorized __VALUE__ length in bits
-  * @retval Value of the ID register
-  */
-#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
-/**
-  * @}
-  */
-
-
-/* Private macros --------------------------------------------------------*/
-/** @defgroup  CRC_Private_Macros CRC Private Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup CRC_Exported_Functions CRC Exported Functions
-  * @{
-  */
-
-/* Initialization and de-initialization functions  ****************************/
-/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
-  * @{
-  */
-HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
-HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc);
-void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
-void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
-/**
-  * @}
-  */
-
-/* Peripheral Control functions ***********************************************/
-/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
-  * @{
-  */
-uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
-uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
-/**
-  * @}
-  */
-
-/* Peripheral State and Error functions ***************************************/
-/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
-  * @{
-  */
-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32F2xx_HAL_CRC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,37 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f2xx_hal_dcmi_ex.h
-  * @author  MCD Application Team
-  * @brief   Header file of DCMI Extension HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F2xx_HAL_DCMI_EX_H
-#define __STM32F2xx_HAL_DCMI_EX_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-#endif /* __STM32F2xx_HAL_DCMI_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,178 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f2xx_hal_def.h
-  * @author  MCD Application Team
-  * @brief   This file contains HAL common defines, enumeration, macros and 
-  *          structures definitions. 
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F2xx_HAL_DEF
-#define __STM32F2xx_HAL_DEF
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f2xx.h"
-#include "Legacy/stm32_hal_legacy.h"
-#include <stddef.h>
-
-/* Exported types ------------------------------------------------------------*/
-
-/** 
-  * @brief  HAL Status structures definition  
-  */  
-typedef enum 
-{
-  HAL_OK       = 0x00U,
-  HAL_ERROR    = 0x01U,
-  HAL_BUSY     = 0x02U,
-  HAL_TIMEOUT  = 0x03U
-} HAL_StatusTypeDef;
-
-/** 
-  * @brief  HAL Lock structures definition  
-  */
-typedef enum 
-{
-  HAL_UNLOCKED = 0x00U,
-  HAL_LOCKED   = 0x01U  
-} HAL_LockTypeDef;
-
-/* Exported macro ------------------------------------------------------------*/
-
-#define UNUSED(X) (void)X      /* To avoid gcc/g++ warnings */
-
-#define HAL_MAX_DELAY      0xFFFFFFFFU
-
-#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) == (BIT))
-#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
-
-#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
-                        do{                                                      \
-                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
-                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
-                          } while(0U)
-
-/** @brief Reset the Handle's State field.
-  * @param  __HANDLE__ specifies the Peripheral Handle.
-  * @note  This macro can be used for the following purpose: 
-  *          - When the Handle is declared as local variable; before passing it as parameter
-  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro 
-  *            to set to 0 the Handle's "State" field.
-  *            Otherwise, "State" field may have any random value and the first time the function 
-  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
-  *            (i.e. HAL_PPP_MspInit() will not be executed).
-  *          - When there is a need to reconfigure the low level hardware: instead of calling
-  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
-  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
-  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
-  * @retval None
-  */
-#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
-
-#if (USE_RTOS == 1U)
-  /* Reserved for future use */
-  #error "USE_RTOS should be 0 in the current HAL release"
-#else
-  #define __HAL_LOCK(__HANDLE__)                                           \
-                                do{                                        \
-                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
-                                    {                                      \
-                                       return HAL_BUSY;                    \
-                                    }                                      \
-                                    else                                   \
-                                    {                                      \
-                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
-                                    }                                      \
-                                  }while (0U)
-
-  #define __HAL_UNLOCK(__HANDLE__)                                          \
-                                  do{                                       \
-                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
-                                    }while (0U)
-#endif /* USE_RTOS */
-
-#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
-  #ifndef __weak
-    #define __weak  __attribute__((weak))
-  #endif
-  #ifndef __packed
-    #define __packed  __attribute__((packed))
-  #endif
-#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
-  #ifndef __weak
-    #define __weak   __attribute__((weak))
-  #endif /* __weak */
-  #ifndef __packed
-    #define __packed __attribute__((__packed__))
-  #endif /* __packed */
-#endif /* __GNUC__ */
-
-
-/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
-#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
-  #ifndef __ALIGN_BEGIN
-    #define __ALIGN_BEGIN
-  #endif
-  #ifndef __ALIGN_END
-    #define __ALIGN_END      __attribute__ ((aligned (4)))
-  #endif
-#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
-  #ifndef __ALIGN_END
-    #define __ALIGN_END    __attribute__ ((aligned (4U)))
-  #endif /* __ALIGN_END */
-  #ifndef __ALIGN_BEGIN  
-    #define __ALIGN_BEGIN
-  #endif /* __ALIGN_BEGIN */
-#else
-  #ifndef __ALIGN_END
-    #define __ALIGN_END
-  #endif /* __ALIGN_END */
-  #ifndef __ALIGN_BEGIN      
-    #if defined   (__CC_ARM)      /* ARM Compiler V5*/
-      #define __ALIGN_BEGIN    __align(4U)
-    #elif defined (__ICCARM__)    /* IAR Compiler */
-      #define __ALIGN_BEGIN 
-    #endif /* __CC_ARM */
-  #endif /* __ALIGN_BEGIN */
-#endif /* __GNUC__ */
-
-/** 
-  * @brief  __NOINLINE definition
-  */ 
-#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined   (  __GNUC__  )
-/* ARM V4/V5 and V6 & GNU Compiler
-   -------------------------------
-*/
-#define __NOINLINE __attribute__ ( (noinline) )
-
-#elif defined ( __ICCARM__ )
-/* ICCARM Compiler
-   ---------------
-*/
-#define __NOINLINE _Pragma("optimize = no_inline")
-
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ___STM32F2xx_HAL_DEF */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,104 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f2xx_hal_dma_ex.h
-  * @author  MCD Application Team
-  * @brief   Header file of DMA HAL extension module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F2xx_HAL_DMA_EX_H
-#define __STM32F2xx_HAL_DMA_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f2xx_hal_def.h"
-
-/** @addtogroup STM32F2xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup DMAEx
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
-  * @brief DMAEx Exported types
-  * @{
-  */
-   
-/** 
-  * @brief  HAL DMA Memory definition  
-  */ 
-typedef enum
-{
-  MEMORY0      = 0x00U,    /*!< Memory 0     */
-  MEMORY1      = 0x01U     /*!< Memory 1     */
-}HAL_DMA_MemoryTypeDef;
-
-/**
-  * @}
-  */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
-  * @brief   DMAEx Exported functions
-  * @{
-  */
-
-/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
-  * @brief   Extended features functions
-  * @{
-  */
-
-/* IO operation functions *******************************************************/
-HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
-HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
-HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
-
-/**
-  * @}
-  */
-/**
-  * @}
-  */
-         
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
-  * @brief DMAEx Private functions
-  * @{
-  */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F2xx_HAL_DMA_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,82 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f2xx_hal_pcd_ex.h
-  * @author  MCD Application Team
-  * @brief   Header file of PCD HAL Extension module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F2xx_HAL_PCD_EX_H
-#define STM32F2xx_HAL_PCD_EX_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f2xx_hal_def.h"
-
-#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
-/** @addtogroup STM32F2xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup PCDEx
-  * @{
-  */
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macros -----------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
-  * @{
-  */
-/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
-  * @{
-  */
-
-#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
-HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
-HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
-#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
-
-void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
-void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* STM32F2xx_HAL_PCD_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,143 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f2xx_hal_pwr_ex.h
-  * @author  MCD Application Team
-  * @brief   Header file of PWR HAL Extension module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F2xx_HAL_PWR_EX_H
-#define __STM32F2xx_HAL_PWR_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f2xx_hal_def.h"
-
-/** @addtogroup STM32F2xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup PWREx
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup PWREx_Exported_Constants PWR Exported Constants
-  * @{
-  */
-
-/**
-  * @}
-  */ 
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup PWREx_Exported_Constants PWR Exported Constants
-  *  @{
-  */
-/**
-  * @}
-  */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup PWREx_Exported_Functions PWR Exported Functions
-  *  @{
-  */
- 
-/** @addtogroup PWREx_Exported_Functions_Group1
-  * @{
-  */
-void HAL_PWREx_EnableFlashPowerDown(void);
-void HAL_PWREx_DisableFlashPowerDown(void); 
-HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
-HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); 
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup PWREx_Private_Constants PWR Private Constants
-  * @{
-  */
-
-/** @defgroup PWREx_register_alias_address PWR Register alias address
-  * @{
-  */
-/* ------------- PWR registers bit address in the alias region ---------------*/
-/* --- CR Register ---*/
-/* Alias word address of FPDS bit */
-#define FPDS_BIT_NUMBER          POSITION_VAL(PWR_CR_FPDS)
-#define CR_FPDS_BB               (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
-
- /**
-  * @}
-  */
-
-/** @defgroup PWREx_CSR_register_alias PWR CSR Register alias address
-  * @{
-  */  
-/* --- CSR Register ---*/
-/* Alias word address of BRE bit */
-#define BRE_BIT_NUMBER   POSITION_VAL(PWR_CSR_BRE)
-#define CSR_BRE_BB      (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))    
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup PWREx_Private_Macros PWR Private Macros
-  * @{
-  */
-
-/** @defgroup PWREx_IS_PWR_Definitions PWR Private macros to check input parameters
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-  
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F2xx_HAL_PWR_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/Show More
+++ b/Show More