add ethernet driver for zynqmp-r5-axu4ev

2026-08-18 11:53:05 +08:00 · 2021-05-13 16:33:40 +08:00
parent e58ea3ded4
commit d205721462
42 changed files with 11554 additions and 58 deletions
@@ -23,6 +23,12 @@ CONFIG_IDLE_THREAD_STACK_SIZE=512
 CONFIG_RT_USING_TIMER_SOFT=y
 CONFIG_RT_TIMER_THREAD_PRIO=4
 CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 CONFIG_RT_DEBUG=y
 # CONFIG_RT_DEBUG_COLOR is not set
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -52,8 +58,9 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
 CONFIG_RT_USING_MEMPOOL=y
 # CONFIG_RT_USING_MEMHEAP is not set
 # CONFIG_RT_USING_NOHEAP is not set
-CONFIG_RT_USING_SMALL_MEM=y
-# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_SMALL_MEM is not set
+CONFIG_RT_USING_SLAB=y
+# CONFIG_RT_USING_USERHEAP is not set
 # CONFIG_RT_USING_MEMTRACE is not set
 CONFIG_RT_USING_HEAP=y

@@ -66,7 +73,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40003
+CONFIG_RT_VER_NUM=0x40004
 # CONFIG_RT_USING_CPU_FFS is not set
 # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set

@@ -123,6 +130,11 @@ CONFIG_RT_DFS_ELM_WORD_ACCESS=y
 # CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
 CONFIG_RT_DFS_ELM_USE_LFN_3=y
 CONFIG_RT_DFS_ELM_USE_LFN=3
+CONFIG_RT_DFS_ELM_LFN_UNICODE_0=y
+# CONFIG_RT_DFS_ELM_LFN_UNICODE_1 is not set
+# CONFIG_RT_DFS_ELM_LFN_UNICODE_2 is not set
+# CONFIG_RT_DFS_ELM_LFN_UNICODE_3 is not set
+CONFIG_RT_DFS_ELM_LFN_UNICODE=0
 CONFIG_RT_DFS_ELM_MAX_LFN=255
 CONFIG_RT_DFS_ELM_DRIVES=2
 CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
@@ -131,15 +143,16 @@ CONFIG_RT_DFS_ELM_REENTRANT=y
 CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
-# CONFIG_RT_USING_DFS_UFFS is not set
-# CONFIG_RT_USING_DFS_JFFS2 is not set
+# CONFIG_RT_USING_DFS_NFS is not set

 #
 # Device Drivers
 #
 CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
-# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SYSTEM_WORKQUEUE=y
+CONFIG_RT_SYSTEM_WORKQUEUE_STACKSIZE=2048
+CONFIG_RT_SYSTEM_WORKQUEUE_PRIORITY=23
 CONFIG_RT_USING_SERIAL=y
 CONFIG_RT_SERIAL_USING_DMA=y
 CONFIG_RT_SERIAL_RB_BUFSZ=64
@@ -147,6 +160,7 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
 # CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PHY is not set
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_ADC is not set
 # CONFIG_RT_USING_DAC is not set
@@ -172,11 +186,6 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_USB_HOST is not set
 # CONFIG_RT_USING_USB_DEVICE is not set

-#
-# Using RapidIO
-#
-# CONFIG_RT_USING_RAPIDIO is not set
-
 #
 # POSIX layer and C standard library
 #
@@ -188,6 +197,7 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_RT_USING_POSIX_GETLINE is not set
 # CONFIG_RT_USING_POSIX_AIO is not set
 # CONFIG_RT_USING_MODULE is not set
+CONFIG_RT_LIBC_FIXED_TIMEZONE=8

 #
 # Network
@@ -196,22 +206,91 @@ CONFIG_RT_USING_POSIX=y
 #
 # Socket abstraction layer
 #
-# CONFIG_RT_USING_SAL is not set
+CONFIG_RT_USING_SAL=y
+CONFIG_SAL_INTERNET_CHECK=y
+
+#
+# protocol stack implement
+#
+CONFIG_SAL_USING_LWIP=y
+CONFIG_SAL_USING_POSIX=y

 #
 # Network interface device
 #
-# CONFIG_RT_USING_NETDEV is not set
+CONFIG_RT_USING_NETDEV=y
+CONFIG_NETDEV_USING_IFCONFIG=y
+CONFIG_NETDEV_USING_PING=y
+CONFIG_NETDEV_USING_NETSTAT=y
+CONFIG_NETDEV_USING_AUTO_DEFAULT=y
+# CONFIG_NETDEV_USING_IPV6 is not set
+CONFIG_NETDEV_IPV4=1
+CONFIG_NETDEV_IPV6=0
+# CONFIG_NETDEV_IPV6_SCOPES is not set

 #
 # light weight TCP/IP stack
 #
-# CONFIG_RT_USING_LWIP is not set
+CONFIG_RT_USING_LWIP=y
+# CONFIG_RT_USING_LWIP141 is not set
+CONFIG_RT_USING_LWIP202=y
+# CONFIG_RT_USING_LWIP212 is not set
+# CONFIG_RT_USING_LWIP_IPV6 is not set
+CONFIG_RT_LWIP_MEM_ALIGNMENT=32
+CONFIG_RT_LWIP_IGMP=y
+CONFIG_RT_LWIP_ICMP=y
+# CONFIG_RT_LWIP_SNMP is not set
+CONFIG_RT_LWIP_DNS=y
+CONFIG_RT_LWIP_DHCP=y
+CONFIG_IP_SOF_BROADCAST=1
+CONFIG_IP_SOF_BROADCAST_RECV=1
+
+#
+# Static IPv4 Address
+#
+CONFIG_RT_LWIP_IPADDR="192.168.1.30"
+CONFIG_RT_LWIP_GWADDR="192.168.1.1"
+CONFIG_RT_LWIP_MSKADDR="255.255.255.0"
+CONFIG_RT_LWIP_UDP=y
+CONFIG_RT_LWIP_TCP=y
+CONFIG_RT_LWIP_RAW=y
+# CONFIG_RT_LWIP_PPP is not set
+CONFIG_RT_MEMP_NUM_NETCONN=8
+CONFIG_RT_LWIP_PBUF_NUM=256
+CONFIG_RT_LWIP_RAW_PCB_NUM=4
+CONFIG_RT_LWIP_UDP_PCB_NUM=4
+CONFIG_RT_LWIP_TCP_PCB_NUM=4
+CONFIG_RT_LWIP_TCP_SEG_NUM=40
+CONFIG_RT_LWIP_TCP_SND_BUF=8196
+CONFIG_RT_LWIP_TCP_WND=8196
+CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
+CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=8
+CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=2048
+# CONFIG_LWIP_NO_RX_THREAD is not set
+# CONFIG_LWIP_NO_TX_THREAD is not set
+CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
+CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=1024
+CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
+# CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set
+CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
+CONFIG_LWIP_NETIF_LINK_CALLBACK=1
+CONFIG_SO_REUSE=1
+CONFIG_LWIP_SO_RCVTIMEO=1
+CONFIG_LWIP_SO_SNDTIMEO=1
+CONFIG_LWIP_SO_RCVBUF=1
+CONFIG_LWIP_SO_LINGER=0
+# CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
+CONFIG_LWIP_NETIF_LOOPBACK=0
+# CONFIG_RT_LWIP_STATS is not set
+# CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
+CONFIG_RT_LWIP_USING_PING=y
+# CONFIG_RT_LWIP_DEBUG is not set

 #
 # AT commands
 #
 # CONFIG_RT_USING_AT is not set
+# CONFIG_LWIP_USING_DHCPD is not set

 #
 # VBUS(Virtual Software BUS)
@@ -225,6 +304,11 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set

+#
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
 #
 # RT-Thread online packages
 #
@@ -292,8 +376,6 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_LIBRWS is not set
 # CONFIG_PKG_USING_TCPSERVER is not set
 # CONFIG_PKG_USING_PROTOBUF_C is not set
-# CONFIG_PKG_USING_ONNX_PARSER is not set
-# CONFIG_PKG_USING_ONNX_BACKEND is not set
 # CONFIG_PKG_USING_DLT645 is not set
 # CONFIG_PKG_USING_QXWZ is not set
 # CONFIG_PKG_USING_SMTP_CLIENT is not set
@@ -307,6 +389,13 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_PDULIB is not set
 # CONFIG_PKG_USING_BTSTACK is not set
 # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_BSAL is not set
+# CONFIG_PKG_USING_AGILE_MODBUS is not set
+# CONFIG_PKG_USING_AGILE_FTP is not set
+# CONFIG_PKG_USING_EMBEDDEDPROTO is not set

 #
 # security packages
@@ -332,8 +421,11 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_STEMWIN is not set
 # CONFIG_PKG_USING_WAVPLAYER is not set
 # CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_PDFGEN is not set
 # CONFIG_PKG_USING_HELIX is not set
 # CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
+# CONFIG_PKG_USING_NUEMWIN is not set

 #
 # tools packages
@@ -345,6 +437,8 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_RDB is not set
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
 # CONFIG_PKG_USING_ADBD is not set
 # CONFIG_PKG_USING_COREMARK is not set
 # CONFIG_PKG_USING_DHRYSTONE is not set
@@ -357,6 +451,22 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_URLENCODE is not set
 # CONFIG_PKG_USING_UMCN is not set
 # CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
+# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
+# CONFIG_PKG_USING_LWLOG is not set
+# CONFIG_PKG_USING_ANV_TRACE is not set
+# CONFIG_PKG_USING_ANV_MEMLEAK is not set
+# CONFIG_PKG_USING_ANV_TESTSUIT is not set
+# CONFIG_PKG_USING_ANV_BENCH is not set
+# CONFIG_PKG_USING_DEVMEM is not set
+# CONFIG_PKG_USING_REGEX is not set
+# CONFIG_PKG_USING_MEM_SANDBOX is not set
+# CONFIG_PKG_USING_SOLAR_TERMS is not set
+# CONFIG_PKG_USING_GAN_ZHI is not set

 #
 # system packages
@@ -364,7 +474,6 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_GUIENGINE is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
-# CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_PARTITION is not set
 # CONFIG_PKG_USING_FAL is not set
 # CONFIG_PKG_USING_FLASHDB is not set
@@ -374,6 +483,9 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_THREAD_POOL is not set
 # CONFIG_PKG_USING_ROBOTS is not set
 # CONFIG_PKG_USING_EV is not set
@@ -388,11 +500,21 @@ CONFIG_RT_USING_POSIX=y
 # Micrium: Micrium software products porting for RT-Thread
 #
 # CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
 # CONFIG_PKG_USING_UC_CRC is not set
 # CONFIG_PKG_USING_UC_CLK is not set
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
 # CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+# CONFIG_PKG_USING_LPM is not set
+# CONFIG_PKG_USING_TLSF is not set
+# CONFIG_PKG_USING_EVENT_RECORDER is not set

 #
 # peripheral libraries and drivers
@@ -401,6 +523,7 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
 # CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
@@ -449,6 +572,30 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_DM9051 is not set
 # CONFIG_PKG_USING_SSD1306 is not set
 # CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_STM32WB55_SDK is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+# CONFIG_PKG_USING_LIBNFC is not set
+# CONFIG_PKG_USING_MFOC is not set
+# CONFIG_PKG_USING_TMC51XX is not set
+# CONFIG_PKG_USING_TCA9534 is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
+# CONFIG_PKG_USING_NAXOS is not set

 #
 # miscellaneous packages
@@ -458,6 +605,7 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
 # CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
@@ -479,19 +627,24 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
 # CONFIG_PKG_USING_KI is not set
-# CONFIG_PKG_USING_NNOM is not set
-# CONFIG_PKG_USING_LIBANN is not set
-# CONFIG_PKG_USING_ELAPACK is not set
 # CONFIG_PKG_USING_ARMv7M_DWT is not set
 # CONFIG_PKG_USING_VT100 is not set
-# CONFIG_PKG_USING_TETRIS is not set
-# CONFIG_PKG_USING_ULAPACK is not set
 # CONFIG_PKG_USING_UKAL is not set
 # CONFIG_PKG_USING_CRCLIB is not set
+
+#
+# entertainment: terminal games and other interesting software packages
+#
 # CONFIG_PKG_USING_THREES is not set
 # CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_DONUT is not set
+# CONFIG_PKG_USING_ACLOCK is not set
 # CONFIG_PKG_USING_LWGPS is not set
-# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
+# CONFIG_PKG_USING_MCURSES is not set
+# CONFIG_PKG_USING_COWSAY is not set
 CONFIG_SOC_ZYNQMP_R5=y

 #
@@ -510,6 +663,16 @@ CONFIG_BSP_USING_UART0=y
 CONFIG_BSP_USING_SDIO=y
 CONFIG_BSP_USING_SD0=y

+#
+# Please set RT_LWIP_PBUF_NUM is at least 256 if Enable Ethernet!
+#
+
+#
+# Please set RT_LWIP_MEM_ALIGNMENT is at 32 if Enable Ethernet!
+#
+CONFIG_BSP_USING_ETH=y
+CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
+
 #
 # Board extended module Drivers
 #
@@ -35,6 +35,7 @@ Each peripheral supporting condition for this BSP is as follows:
 | UART              |     Support     | UART0                            |
 | TIMER     |     Support     |     TTC0 provides system clock         |
 | EMMC | Support | SD0 Controller |
+| EMAC | Support | e0 Net Interface |

 ## Execution Instruction

@@ -99,14 +100,31 @@ msh />

 This BSP enables EMMC driver and DFS file system by default. If you need to use a file system, you can format and mount it by yourself.

+This BSP is enabled and configured with net interface driver and LwIP protocol stack by default, and note the following configuration:
+
+1. Note that `RT_LWIP_PBUF_NUM` is set to at least 256
+
+2. Note that `RT_ LWIP_ MEM_ Alignment` is set to 32. If the version other than lwip 2.0.2 in RTT is used, the `MEM_ALIGNMENT` in `lwipopts.h` needs to be modified manually because the macro is not used in other versions.
+
 ## BSP Migration

 If you need to ported the BSP to another development board of Xilinx Zynq UltraScale+ MPSOC development platform, it is also convenient. The main modifications are as follows:

-1. Memory: `psu_r5_ddr_0_MEM_0` in `zynqmp-r5.ld` (if DDR memory is less than 2G)
+1. Memory: `psu_r5_ddr_0_MEM_0` in `zynqmp-r5.ld`  and `HEAP_END` in `board.h ` (if DDR memory is less than 2G) 
 2. Main Frequency: `XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ` in `zynqmp-r5.h`
 3. Pin and Frequency of Serial Port: `rxmio`, `txmio` and `XPAR_PSU_UART_0_UART_CLK_FREQ_HZ` in `drv_uart.c`
 4. Timer Frequency: `XPAR_PSU_TTC_0_TTC_CLK_FREQ_HZ` in `drv_timer.c`
 5. SD Controller: Block device driver initialization in `drv_sdcard.c`
+6. Net interface: If the PHY chip used is not in the range of driver support, it may be necessary to realize the rate identification function of the corresponding chip in `xemacpsif_physpeed.c`. You can refer to the corresponding tutorial of Alinx.

 The parameter macro definition in `xparameters.h` does not need to be modified manually. You can directly copy the `xparameters.h` file of the development board generated in Xilinx Vitis.
+
+## Attention
+
+-None
+
+## Contact
+
+Maintainer:
+
+-  [Wang Huachen](https://github.com/Wang-Huachen/)
@@ -32,6 +32,7 @@ AXU4EV-E 开发板是 芯驿电子科技（上海）有限公司 推出的一款
 | UART              |     支持     | UART0                            |
 | TIMER     |     支持     |     TTC0提供系统时钟         |
 | EMMC | 支持 | SD0控制器 |
+| EMAC | 支持 | e0网卡 |

 ## 使用说明

@@ -107,16 +108,22 @@ msh />

 此 BSP 默认开启了 EMMC 驱动和 DFS 文件系统，如果需要使用文件系统可以自行格式化并挂载。

+此 BSP 默认开启并配置了网卡驱动及lwip协议栈，相关配置需要注意如下几点：
+
+1. 注意将`RT_LWIP_PBUF_NUM`至少设置为256
+2. 注意将`RT_LWIP_MEM_ALIGNMENT`设置为32。若使用RTT中lwip 2.0.2以外的版本时，由于其他版本未使用该宏，需要手动修改`lwipopts.h`中的`MEM_ALIGNMENT`宏。
+

 ## 板级移植

 如果需要将BSP移植到其他 XILINX Zynq UltraScale+ MPSoCs 开发平台的开发板上也比较方便，主要修改的地方有以下几点：

-1. 内存： 如果 DDR memory 小于 2G，需要修改`zynqmp-r5.ld`链接文件中的`psu_r5_ddr_0_MEM_0` 
+1. 内存： 如果 DDR memory 小于 2G，需要修改`zynqmp-r5.ld`链接文件中的`psu_r5_ddr_0_MEM_0` 以及`board.h`中的`HEAP_END`
 2. 主频： `xparameters.h`中的`XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ`
 3. 串口引脚和频率：`drv_uart.c`中的`rxmio`, `txmio` 和`xparameters.h`中的`XPAR_PSU_UART_0_UART_CLK_FREQ_HZ`
 4. 定时器频率：`xparameters.h`中的`XPAR_PSU_TTC_0_TTC_CLK_FREQ_HZ` 
 5. SD控制器：`drv_sdcard.c`中的块设备驱动初始化
+6. 网卡驱动：若使用的PHY芯片不在驱动支持范围内，可能需要在`xemacpsif_physpeed.c`中实现相应芯片的速率识别函数，可参考ALINX的相应教程。

 以上需要修改的`xparameters.h`中的参数宏定义不需要手动修改，可以直接将Xilinx Vitis中产生的开发板的`xparameters.h`文件复制过来即可。

@@ -24,6 +24,19 @@ menu "Hardware Drivers Config"
                bool "Enable SD0 EMMC"
                default y
        endif
+    comment "Please set RT_LWIP_PBUF_NUM is at least 256 if Enable Ethernet!"
+    comment "Please set RT_LWIP_MEM_ALIGNMENT is at 32 if Enable Ethernet!"
+    menuconfig BSP_USING_ETH
+        bool "Enable Ethernet"
+        default n
+        select RT_USING_NETDEV
+        select RT_USING_LWIP
+        if BSP_USING_ETH
+            config RT_LWIP_PBUF_POOL_BUFSIZE
+                int "The size of each pbuf in the pbuf pool"
+                range 1500 2000
+                default 1700
+        endif

    endmenu

@@ -11,6 +11,9 @@ if GetDepend('BSP_USING_SDIO'):
    objs = objs + SConscript('sdps_v3_9/SConscript')
 if GetDepend('RT_USING_PIN'):
    objs = objs + SConscript('gpiops_v3_7/SConscript')
+if GetDepend('BSP_USING_ETH'):
+    objs = objs + SConscript('emacps_v3_11/SConscript')
+    objs = objs + SConscript('xemacpsif/SConscript')

 objs = objs + group

@@ -0,0 +1,15 @@
+import rtconfig
+from building import *
+
+# get current directory
+cwd = GetCurrentDir()
+CPPPATH = [cwd]
+
+# The set of source files associated with this SConscript file.
+
+src = Glob('*.c')
+path = cwd
+
+group = DefineGroup('ZYNQMP_HAL', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
@@ -0,0 +1,480 @@
+/******************************************************************************
+* Copyright (C) 2010 - 2020 Xilinx, Inc.  All rights reserved.
+* SPDX-License-Identifier: MIT
+******************************************************************************/
+
+/*****************************************************************************/
+/**
+*
+* @file xemacps.c
+* @addtogroup emacps_v3_11
+* @{
+*
+* The XEmacPs driver. Functions in this file are the minimum required functions
+* for this driver. See xemacps.h for a detailed description of the driver.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release
+* 2.1  srt  07/15/14 Add support for Zynq Ultrascale Mp GEM specification and
+*		      64-bit changes.
+* 3.00 kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.0  hk   02/20/15 Added support for jumbo frames. Increase AHB burst.
+*                    Disable extended mode. Perform all 64 bit changes under
+*                    check for arch64.
+* 3.1  hk   08/10/15 Update upper 32 bit tx and rx queue ptr registers
+* 3.5  hk   08/14/17 Update cache coherency information of the interface in
+*                    its config structure.
+* 3.8  hk   09/17/18 Cleanup stale comments.
+* 3.8  mus  11/05/18 Support 64 bit DMA addresses for Microblaze-X platform.
+* 3.10 hk   05/16/19 Clear status registers properly in reset
+* 3.11 sd   02/14/20 Add clock support
+*
+* </pre>
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+void XEmacPs_StubHandler(void);	/* Default handler routine */
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+* Initialize a specific XEmacPs instance/driver. The initialization entails:
+* - Initialize fields of the XEmacPs instance structure
+* - Reset hardware and apply default options
+* - Configure the DMA channels
+*
+* The PHY is setup independently from the device. Use the MII or whatever other
+* interface may be present for setup.
+*
+* @param InstancePtr is a pointer to the instance to be worked on.
+* @param CfgPtr is the device configuration structure containing required
+*        hardware build data.
+* @param EffectiveAddress is the base address of the device. If address
+*        translation is not utilized, this parameter can be passed in using
+*        CfgPtr->Config.BaseAddress to specify the physical base address.
+*
+* @return
+* - XST_SUCCESS if initialization was successful
+*
+******************************************************************************/
+LONG XEmacPs_CfgInitialize(XEmacPs *InstancePtr, XEmacPs_Config * CfgPtr,
+			   UINTPTR EffectiveAddress)
+{
+	/* Verify arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(CfgPtr != NULL);
+
+	/* Set device base address and ID */
+	InstancePtr->Config.DeviceId = CfgPtr->DeviceId;
+	InstancePtr->Config.BaseAddress = EffectiveAddress;
+	InstancePtr->Config.IsCacheCoherent = CfgPtr->IsCacheCoherent;
+#if defined  (XCLOCKING)
+	InstancePtr->Config.RefClk = CfgPtr->RefClk;
+#endif
+
+	/* Set callbacks to an initial stub routine */
+	InstancePtr->SendHandler = ((XEmacPs_Handler)((void*)XEmacPs_StubHandler));
+	InstancePtr->RecvHandler = ((XEmacPs_Handler)(void*)XEmacPs_StubHandler);
+	InstancePtr->ErrorHandler = ((XEmacPs_ErrHandler)(void*)XEmacPs_StubHandler);
+
+	/* Reset the hardware and set default options */
+	InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+	XEmacPs_Reset(InstancePtr);
+
+	return (LONG)(XST_SUCCESS);
+}
+
+
+/*****************************************************************************/
+/**
+* Start the Ethernet controller as follows:
+*   - Enable transmitter if XTE_TRANSMIT_ENABLE_OPTION is set
+*   - Enable receiver if XTE_RECEIVER_ENABLE_OPTION is set
+*   - Start the SG DMA send and receive channels and enable the device
+*     interrupt
+*
+* @param InstancePtr is a pointer to the instance to be worked on.
+*
+* @return N/A
+*
+* @note
+* Hardware is configured with scatter-gather DMA, the driver expects to start
+* the scatter-gather channels and expects that the user has previously set up
+* the buffer descriptor lists.
+*
+* This function makes use of internal resources that are shared between the
+* Start, Stop, and Set/ClearOptions functions. So if one task might be setting
+* device options while another is trying to start the device, the user is
+* required to provide protection of this shared data (typically using a
+* semaphore).
+*
+* This function must not be preempted by an interrupt that may service the
+* device.
+*
+******************************************************************************/
+void XEmacPs_Start(XEmacPs *InstancePtr)
+{
+	u32 Reg;
+
+	/* Assert bad arguments and conditions */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+#if defined  (XCLOCKING)
+	if (InstancePtr->IsStarted != (u32)XIL_COMPONENT_IS_STARTED) {
+		Xil_ClockEnable(InstancePtr->Config.RefClk);
+	}
+#endif
+
+	/* Start DMA */
+	/* When starting the DMA channels, both transmit and receive sides
+	 * need an initialized BD list.
+	 */
+	if (InstancePtr->Version == 2) {
+		Xil_AssertVoid(InstancePtr->RxBdRing.BaseBdAddr != 0);
+		Xil_AssertVoid(InstancePtr->TxBdRing.BaseBdAddr != 0);
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_RXQBASE_OFFSET,
+			   InstancePtr->RxBdRing.BaseBdAddr);
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_TXQBASE_OFFSET,
+			   InstancePtr->TxBdRing.BaseBdAddr);
+	}
+
+	/* clear any existed int status */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_ISR_OFFSET,
+			   XEMACPS_IXR_ALL_MASK);
+
+	/* Enable transmitter if not already enabled */
+	if ((InstancePtr->Options & (u32)XEMACPS_TRANSMITTER_ENABLE_OPTION)!=0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET);
+		if ((!(Reg & XEMACPS_NWCTRL_TXEN_MASK))==TRUE) {
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+					   XEMACPS_NWCTRL_OFFSET,
+				   Reg | (u32)XEMACPS_NWCTRL_TXEN_MASK);
+		}
+	}
+
+	/* Enable receiver if not already enabled */
+	if ((InstancePtr->Options & XEMACPS_RECEIVER_ENABLE_OPTION) != 0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET);
+		if ((!(Reg & XEMACPS_NWCTRL_RXEN_MASK))==TRUE) {
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+					   XEMACPS_NWCTRL_OFFSET,
+				   Reg | (u32)XEMACPS_NWCTRL_RXEN_MASK);
+		}
+	}
+
+        /* Enable TX and RX interrupts */
+        XEmacPs_IntEnable(InstancePtr, (XEMACPS_IXR_TX_ERR_MASK |
+	XEMACPS_IXR_RX_ERR_MASK | (u32)XEMACPS_IXR_FRAMERX_MASK |
+	(u32)XEMACPS_IXR_TXCOMPL_MASK));
+
+	/* Enable TX Q1 Interrupts */
+	if (InstancePtr->Version > 2)
+		XEmacPs_IntQ1Enable(InstancePtr, XEMACPS_INTQ1_IXR_ALL_MASK);
+
+	/* Mark as started */
+	InstancePtr->IsStarted = XIL_COMPONENT_IS_STARTED;
+
+	return;
+}
+
+
+/*****************************************************************************/
+/**
+* Gracefully stop the Ethernet MAC as follows:
+*   - Disable all interrupts from this device
+*   - Stop DMA channels
+*   - Disable the tansmitter and receiver
+*
+* Device options currently in effect are not changed.
+*
+* This function will disable all interrupts. Default interrupts settings that
+* had been enabled will be restored when XEmacPs_Start() is called.
+*
+* @param InstancePtr is a pointer to the instance to be worked on.
+*
+* @note
+* This function makes use of internal resources that are shared between the
+* Start, Stop, SetOptions, and ClearOptions functions. So if one task might be
+* setting device options while another is trying to start the device, the user
+* is required to provide protection of this shared data (typically using a
+* semaphore).
+*
+* Stopping the DMA channels causes this function to block until the DMA
+* operation is complete.
+*
+******************************************************************************/
+void XEmacPs_Stop(XEmacPs *InstancePtr)
+{
+	u32 Reg;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* Disable all interrupts */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_IDR_OFFSET,
+			   XEMACPS_IXR_ALL_MASK);
+
+	/* Disable the receiver & transmitter */
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_NWCTRL_OFFSET);
+	Reg &= (u32)(~XEMACPS_NWCTRL_RXEN_MASK);
+	Reg &= (u32)(~XEMACPS_NWCTRL_TXEN_MASK);
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_NWCTRL_OFFSET, Reg);
+
+	/* Mark as stopped */
+	InstancePtr->IsStarted = 0U;
+#if defined  (XCLOCKING)
+	Xil_ClockDisable(InstancePtr->Config.RefClk);
+#endif
+}
+
+
+/*****************************************************************************/
+/**
+* Perform a graceful reset of the Ethernet MAC. Resets the DMA channels, the
+* transmitter, and the receiver.
+*
+* Steps to reset
+* - Stops transmit and receive channels
+* - Stops DMA
+* - Configure transmit and receive buffer size to default
+* - Clear transmit and receive status register and counters
+* - Clear all interrupt sources
+* - Clear phy (if there is any previously detected) address
+* - Clear MAC addresses (1-4) as well as Type IDs and hash value
+*
+* All options are placed in their default state. Any frames in the
+* descriptor lists will remain in the lists. The side effect of doing
+* this is that after a reset and following a restart of the device, frames
+* were in the list before the reset may be transmitted or received.
+*
+* The upper layer software is responsible for re-configuring (if necessary)
+* and restarting the MAC after the reset. Note also that driver statistics
+* are not cleared on reset. It is up to the upper layer software to clear the
+* statistics if needed.
+*
+* When a reset is required, the driver notifies the upper layer software of
+* this need through the ErrorHandler callback and specific status codes.
+* The upper layer software is responsible for calling this Reset function
+* and then re-configuring the device.
+*
+* @param InstancePtr is a pointer to the instance to be worked on.
+*
+******************************************************************************/
+void XEmacPs_Reset(XEmacPs *InstancePtr)
+{
+	u32 Reg;
+	u8 i;
+	s8 EmacPs_zero_MAC[6] = { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 };
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* Stop the device and reset hardware */
+	XEmacPs_Stop(InstancePtr);
+	InstancePtr->Options = XEMACPS_DEFAULT_OPTIONS;
+
+	InstancePtr->Version = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, 0xFC);
+
+	InstancePtr->Version = (InstancePtr->Version >> 16) & 0xFFF;
+
+	InstancePtr->MaxMtuSize = XEMACPS_MTU;
+	InstancePtr->MaxFrameSize = XEMACPS_MTU + XEMACPS_HDR_SIZE +
+					XEMACPS_TRL_SIZE;
+	InstancePtr->MaxVlanFrameSize = InstancePtr->MaxFrameSize +
+					XEMACPS_HDR_VLAN_SIZE;
+	InstancePtr->RxBufMask = XEMACPS_RXBUF_LEN_MASK;
+
+	/* Setup hardware with default values */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_NWCTRL_OFFSET,
+			(XEMACPS_NWCTRL_STATCLR_MASK |
+			XEMACPS_NWCTRL_MDEN_MASK) &
+			(u32)(~XEMACPS_NWCTRL_LOOPEN_MASK));
+
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_NWCFG_OFFSET);
+	Reg &= XEMACPS_NWCFG_MDCCLKDIV_MASK;
+
+	Reg = Reg | (u32)XEMACPS_NWCFG_100_MASK |
+			(u32)XEMACPS_NWCFG_FDEN_MASK |
+			(u32)XEMACPS_NWCFG_UCASTHASHEN_MASK;
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCFG_OFFSET, Reg);
+	if (InstancePtr->Version > 2) {
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_NWCFG_OFFSET,
+			(XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, XEMACPS_NWCFG_OFFSET) |
+				XEMACPS_NWCFG_DWIDTH_64_MASK));
+	}
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_DMACR_OFFSET,
+			(((((u32)XEMACPS_RX_BUF_SIZE / (u32)XEMACPS_RX_BUF_UNIT) +
+				(((((u32)XEMACPS_RX_BUF_SIZE %
+				(u32)XEMACPS_RX_BUF_UNIT))!=(u32)0) ? 1U : 0U)) <<
+				(u32)(XEMACPS_DMACR_RXBUF_SHIFT)) &
+				(u32)(XEMACPS_DMACR_RXBUF_MASK)) |
+				(u32)XEMACPS_DMACR_RXSIZE_MASK |
+				(u32)XEMACPS_DMACR_TXSIZE_MASK);
+
+
+	if (InstancePtr->Version > 2) {
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_DMACR_OFFSET,
+			(XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, XEMACPS_DMACR_OFFSET) |
+#if defined(__aarch64__) || defined(__arch64__)
+			(u32)XEMACPS_DMACR_ADDR_WIDTH_64 |
+#endif
+			(u32)XEMACPS_DMACR_INCR16_AHB_BURST));
+	}
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_TXSR_OFFSET, XEMACPS_SR_ALL_MASK);
+
+	XEmacPs_SetQueuePtr(InstancePtr, 0, 0x00U, (u16)XEMACPS_SEND);
+	if (InstancePtr->Version > 2)
+		XEmacPs_SetQueuePtr(InstancePtr, 0, 0x01U, (u16)XEMACPS_SEND);
+	XEmacPs_SetQueuePtr(InstancePtr, 0, 0x00U, (u16)XEMACPS_RECV);
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_RXSR_OFFSET, XEMACPS_SR_ALL_MASK);
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_IDR_OFFSET,
+			   XEMACPS_IXR_ALL_MASK);
+
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_ISR_OFFSET);
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_ISR_OFFSET,
+			   Reg);
+
+	XEmacPs_ClearHash(InstancePtr);
+
+	for (i = 1U; i < 5U; i++) {
+		(void)XEmacPs_SetMacAddress(InstancePtr, EmacPs_zero_MAC, i);
+		(void)XEmacPs_SetTypeIdCheck(InstancePtr, 0x00000000U, i);
+	}
+
+	/* clear all counters */
+	for (i = 0U; i < (u8)((XEMACPS_LAST_OFFSET - XEMACPS_OCTTXL_OFFSET) / 4U);
+	     i++) {
+		(void)XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+                                   XEMACPS_OCTTXL_OFFSET + (u32)(((u32)i) * ((u32)4)));
+	}
+
+	/* Disable the receiver */
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_NWCTRL_OFFSET);
+	Reg &= (u32)(~XEMACPS_NWCTRL_RXEN_MASK);
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_NWCTRL_OFFSET, Reg);
+
+	/* Sync default options with hardware but leave receiver and
+         * transmitter disabled. They get enabled with XEmacPs_Start() if
+	 * XEMACPS_TRANSMITTER_ENABLE_OPTION and
+         * XEMACPS_RECEIVER_ENABLE_OPTION are set.
+	 */
+	(void)XEmacPs_SetOptions(InstancePtr, InstancePtr->Options &
+			    ~((u32)XEMACPS_TRANSMITTER_ENABLE_OPTION |
+			      (u32)XEMACPS_RECEIVER_ENABLE_OPTION));
+
+	(void)XEmacPs_ClearOptions(InstancePtr, ~InstancePtr->Options);
+}
+
+
+/******************************************************************************/
+/**
+ * This is a stub for the asynchronous callbacks. The stub is here in case the
+ * upper layer forgot to set the handler(s). On initialization, all handlers are
+ * set to this callback. It is considered an error for this handler to be
+ * invoked.
+ *
+ ******************************************************************************/
+void XEmacPs_StubHandler(void)
+{
+	Xil_AssertVoidAlways();
+}
+
+/*****************************************************************************/
+/**
+* This function sets the start address of the transmit/receive buffer queue.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	QPtr is the address of the Queue to be written
+* @param	QueueNum is the Buffer Queue Index
+* @param	Direction indicates Transmit/Receive
+*
+* @note
+* The buffer queue addresses has to be set before starting the transfer, so
+* this function has to be called in prior to XEmacPs_Start()
+*
+******************************************************************************/
+void XEmacPs_SetQueuePtr(XEmacPs *InstancePtr, UINTPTR QPtr, u8 QueueNum,
+			 u16 Direction)
+{
+	/* Assert bad arguments and conditions */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+        /* If already started, then there is nothing to do */
+        if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) {
+                return;
+        }
+
+	if (QueueNum == 0x00U) {
+		if (Direction == XEMACPS_SEND) {
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_TXQBASE_OFFSET,
+				(QPtr & ULONG64_LO_MASK));
+		} else {
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_RXQBASE_OFFSET,
+				(QPtr & ULONG64_LO_MASK));
+		}
+	}
+	 else {
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_TXQ1BASE_OFFSET,
+			(QPtr & ULONG64_LO_MASK));
+	}
+#ifdef __aarch64__
+	if (Direction == XEMACPS_SEND) {
+		/* Set the MSB of TX Queue start address */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_MSBBUF_TXQBASE_OFFSET,
+				(u32)((QPtr & ULONG64_HI_MASK) >> 32U));
+	} else {
+		/* Set the MSB of RX Queue start address */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_MSBBUF_RXQBASE_OFFSET,
+				(u32)((QPtr & ULONG64_HI_MASK) >> 32U));
+	}
+#endif
+}
+/** @} */
@@ -0,0 +1,215 @@
+/******************************************************************************
+* Copyright (C) 2010 - 2020 Xilinx, Inc.  All rights reserved.
+* SPDX-License-Identifier: MIT
+******************************************************************************/
+
+/*****************************************************************************/
+/**
+*
+* @file xemacps_bdring.h
+* @addtogroup emacps_v3_11
+* @{
+*
+* The Xiline EmacPs Buffer Descriptor ring driver. This is part of EmacPs
+* DMA functionalities.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release
+* 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp architecture.
+* 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.6   rb   09/08/17 HwCnt variable (in XEmacPs_BdRing structure) is
+*		      changed to volatile.
+*
+* </pre>
+*
+******************************************************************************/
+
+#ifndef XEMACPS_BDRING_H	/* prevent curcular inclusions */
+#define XEMACPS_BDRING_H	/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**************************** Type Definitions *******************************/
+
+/** This is an internal structure used to maintain the DMA list */
+typedef struct {
+	UINTPTR PhysBaseAddr;/**< Physical address of 1st BD in list */
+	UINTPTR BaseBdAddr;	 /**< Virtual address of 1st BD in list */
+	UINTPTR HighBdAddr;	 /**< Virtual address of last BD in the list */
+	u32 Length;	 /**< Total size of ring in bytes */
+	u32 RunState;	 /**< Flag to indicate DMA is started */
+	u32 Separation;	 /**< Number of bytes between the starting address
+                                  of adjacent BDs */
+	XEmacPs_Bd *FreeHead;
+			     /**< First BD in the free group */
+	XEmacPs_Bd *PreHead;/**< First BD in the pre-work group */
+	XEmacPs_Bd *HwHead; /**< First BD in the work group */
+	XEmacPs_Bd *HwTail; /**< Last BD in the work group */
+	XEmacPs_Bd *PostHead;
+			     /**< First BD in the post-work group */
+	XEmacPs_Bd *BdaRestart;
+			     /**< BDA to load when channel is started */
+
+	volatile u32 HwCnt;    /**< Number of BDs in work group */
+	u32 PreCnt;     /**< Number of BDs in pre-work group */
+	u32 FreeCnt;    /**< Number of allocatable BDs in the free group */
+	u32 PostCnt;    /**< Number of BDs in post-work group */
+	u32 AllCnt;     /**< Total Number of BDs for channel */
+} XEmacPs_BdRing;
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/**
+* Use this macro at initialization time to determine how many BDs will fit
+* in a BD list within the given memory constraints.
+*
+* The results of this macro can be provided to XEmacPs_BdRingCreate().
+*
+* @param Alignment specifies what byte alignment the BDs must fall on and
+*        must be a power of 2 to get an accurate calculation (32, 64, 128,...)
+* @param Bytes is the number of bytes to be used to store BDs.
+*
+* @return Number of BDs that can fit in the given memory area
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingCntCalc(u32 Alignment, u32 Bytes)
+*
+******************************************************************************/
+#define XEmacPs_BdRingCntCalc(Alignment, Bytes)                    \
+    (u32)((Bytes) / (sizeof(XEmacPs_Bd)))
+
+/*****************************************************************************/
+/**
+* Use this macro at initialization time to determine how many bytes of memory
+* is required to contain a given number of BDs at a given alignment.
+*
+* @param Alignment specifies what byte alignment the BDs must fall on. This
+*        parameter must be a power of 2 to get an accurate calculation (32, 64,
+*        128,...)
+* @param NumBd is the number of BDs to calculate memory size requirements for
+*
+* @return The number of bytes of memory required to create a BD list with the
+*         given memory constraints.
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingMemCalc(u32 Alignment, u32 NumBd)
+*
+******************************************************************************/
+#define XEmacPs_BdRingMemCalc(Alignment, NumBd)                    \
+    (u32)(sizeof(XEmacPs_Bd) * (NumBd))
+
+/****************************************************************************/
+/**
+* Return the total number of BDs allocated by this channel with
+* XEmacPs_BdRingCreate().
+*
+* @param  RingPtr is the DMA channel to operate on.
+*
+* @return The total number of BDs allocated for this channel.
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingGetCnt(XEmacPs_BdRing* RingPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingGetCnt(RingPtr) ((RingPtr)->AllCnt)
+
+/****************************************************************************/
+/**
+* Return the number of BDs allocatable with XEmacPs_BdRingAlloc() for pre-
+* processing.
+*
+* @param  RingPtr is the DMA channel to operate on.
+*
+* @return The number of BDs currently allocatable.
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingGetFreeCnt(XEmacPs_BdRing* RingPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingGetFreeCnt(RingPtr)   ((RingPtr)->FreeCnt)
+
+/****************************************************************************/
+/**
+* Return the next BD from BdPtr in a list.
+*
+* @param  RingPtr is the DMA channel to operate on.
+* @param  BdPtr is the BD to operate on.
+*
+* @return The next BD in the list relative to the BdPtr parameter.
+*
+* @note
+* C-style signature:
+*    XEmacPs_Bd *XEmacPs_BdRingNext(XEmacPs_BdRing* RingPtr,
+*                                      XEmacPs_Bd *BdPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingNext(RingPtr, BdPtr)                           \
+    (((UINTPTR)((void *)(BdPtr)) >= (RingPtr)->HighBdAddr) ?                     \
+    (XEmacPs_Bd*)((void*)(RingPtr)->BaseBdAddr) :                              \
+    (XEmacPs_Bd*)((UINTPTR)((void *)(BdPtr)) + (RingPtr)->Separation))
+
+/****************************************************************************/
+/**
+* Return the previous BD from BdPtr in the list.
+*
+* @param  RingPtr is the DMA channel to operate on.
+* @param  BdPtr is the BD to operate on
+*
+* @return The previous BD in the list relative to the BdPtr parameter.
+*
+* @note
+* C-style signature:
+*    XEmacPs_Bd *XEmacPs_BdRingPrev(XEmacPs_BdRing* RingPtr,
+*                                      XEmacPs_Bd *BdPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingPrev(RingPtr, BdPtr)                           \
+    (((UINTPTR)(BdPtr) <= (RingPtr)->BaseBdAddr) ?                     \
+    (XEmacPs_Bd*)(RingPtr)->HighBdAddr :                              \
+    (XEmacPs_Bd*)((UINTPTR)(BdPtr) - (RingPtr)->Separation))
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Scatter gather DMA related functions in xemacps_bdring.c
+ */
+LONG XEmacPs_BdRingCreate(XEmacPs_BdRing * RingPtr, UINTPTR PhysAddr,
+			  UINTPTR VirtAddr, u32 Alignment, u32 BdCount);
+LONG XEmacPs_BdRingClone(XEmacPs_BdRing * RingPtr, XEmacPs_Bd * SrcBdPtr,
+			 u8 Direction);
+LONG XEmacPs_BdRingAlloc(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			 XEmacPs_Bd ** BdSetPtr);
+LONG XEmacPs_BdRingUnAlloc(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			   XEmacPs_Bd * BdSetPtr);
+LONG XEmacPs_BdRingToHw(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			XEmacPs_Bd * BdSetPtr);
+LONG XEmacPs_BdRingFree(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			XEmacPs_Bd * BdSetPtr);
+u32 XEmacPs_BdRingFromHwTx(XEmacPs_BdRing * RingPtr, u32 BdLimit,
+				 XEmacPs_Bd ** BdSetPtr);
+u32 XEmacPs_BdRingFromHwRx(XEmacPs_BdRing * RingPtr, u32 BdLimit,
+				 XEmacPs_Bd ** BdSetPtr);
+LONG XEmacPs_BdRingCheck(XEmacPs_BdRing * RingPtr, u8 Direction);
+
+void XEmacPs_BdRingPtrReset(XEmacPs_BdRing * RingPtr, void *virtaddrloc);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* end of protection macros */
+/** @} */
@@ -0,0 +1,32 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 2020.1
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2021 Xilinx, Inc. All Rights Reserved.
+* SPDX-License-Identifier: MIT 
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xemacps.h"
+
+/*
+* The configuration table for devices
+*/
+
+XEmacPs_Config XEmacPs_ConfigTable[XPAR_XEMACPS_NUM_INSTANCES] =
+{
+	{
+		XPAR_PSU_ETHERNET_3_DEVICE_ID,
+		XPAR_PSU_ETHERNET_3_BASEADDR,
+		XPAR_PSU_ETHERNET_3_IS_CACHE_COHERENT
+	}
+};
+
+
@@ -0,0 +1,97 @@
+/******************************************************************************
+* Copyright (C) 2010 - 2020 Xilinx, Inc.  All rights reserved.
+* SPDX-License-Identifier: MIT
+******************************************************************************/
+
+/*****************************************************************************/
+/**
+*
+* @file xemacps_hw.c
+* @addtogroup emacps_v3_11
+* @{
+*
+* This file contains the implementation of the ethernet interface reset sequence
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.05a kpc  28/06/13 First release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps_hw.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+* This function perform the reset sequence to the given emacps interface by
+* configuring the appropriate control bits in the emacps specific registers.
+* the emacps reset sequence involves the following steps
+*	Disable all the interuupts
+*	Clear the status registers
+*	Disable Rx and Tx engines
+*	Update the Tx and Rx descriptor queue registers with reset values
+*	Update the other relevant control registers with reset value
+*
+* @param   BaseAddr of the interface
+*
+* @return N/A
+*
+* @note
+* This function will not modify the slcr registers that are relevant for
+* emacps controller
+******************************************************************************/
+void XEmacPs_ResetHw(u32 BaseAddr)
+{
+	u32 RegVal;
+
+	/* Disable the interrupts  */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_IDR_OFFSET,0x0U);
+
+	/* Stop transmission,disable loopback and Stop tx and Rx engines */
+	RegVal = XEmacPs_ReadReg(BaseAddr,XEMACPS_NWCTRL_OFFSET);
+	RegVal &= ~((u32)XEMACPS_NWCTRL_TXEN_MASK|
+				(u32)XEMACPS_NWCTRL_RXEN_MASK|
+				(u32)XEMACPS_NWCTRL_HALTTX_MASK|
+				(u32)XEMACPS_NWCTRL_LOOPEN_MASK);
+	/* Clear the statistic registers, flush the packets in DPRAM*/
+	RegVal |= (XEMACPS_NWCTRL_STATCLR_MASK|
+				XEMACPS_NWCTRL_FLUSH_DPRAM_MASK);
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_NWCTRL_OFFSET,RegVal);
+	/* Clear the interrupt status */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_ISR_OFFSET,XEMACPS_IXR_ALL_MASK);
+	/* Clear the tx status */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_TXSR_OFFSET,(XEMACPS_TXSR_ERROR_MASK|
+									(u32)XEMACPS_TXSR_TXCOMPL_MASK|
+									(u32)XEMACPS_TXSR_TXGO_MASK));
+	/* Clear the rx status */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_RXSR_OFFSET,
+								XEMACPS_RXSR_FRAMERX_MASK);
+	/* Clear the tx base address */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_TXQBASE_OFFSET,0x0U);
+	/* Clear the rx base address */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_RXQBASE_OFFSET,0x0U);
+	/* Update the network config register with reset value */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_NWCFG_OFFSET,XEMACPS_NWCFG_RESET_MASK);
+	/* Update the hash address registers with reset value */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_HASHL_OFFSET,0x0U);
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_HASHH_OFFSET,0x0U);
+}
+/** @} */
@@ -0,0 +1,242 @@
+/******************************************************************************
+* Copyright (C) 2010 - 2020 Xilinx, Inc.  All rights reserved.
+* SPDX-License-Identifier: MIT
+******************************************************************************/
+
+/*****************************************************************************/
+/**
+*
+* @file xemacps_intr.c
+* @addtogroup emacps_v3_11
+* @{
+*
+* Functions in this file implement general purpose interrupt processing related
+* functionality. See xemacps.h for a detailed description of the driver.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release
+* 1.03a asa  01/24/13 Fix for CR #692702 which updates error handling for
+*		      Rx errors. Under heavy Rx traffic, there will be a large
+*		      number of errors related to receive buffer not available.
+*		      Because of a HW bug (SI #692601), under such heavy errors,
+*		      the Rx data path can become unresponsive. To reduce the
+*		      probabilities for hitting this HW bug, the SW writes to
+*		      bit 18 to flush a packet from Rx DPRAM immediately. The
+*		      changes for it are done in the function
+*		      XEmacPs_IntrHandler.
+* 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp GEM specification
+*		       and 64-bit changes.
+* 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1   hk   07/27/15 Do not call error handler with '0' error code when
+*                     there is no error. CR# 869403
+* </pre>
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+ * Install an asynchronous handler function for the given HandlerType:
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param HandlerType indicates what interrupt handler type is.
+ *        XEMACPS_HANDLER_DMASEND, XEMACPS_HANDLER_DMARECV and
+ *        XEMACPS_HANDLER_ERROR.
+ * @param FuncPointer is the pointer to the callback function
+ * @param CallBackRef is the upper layer callback reference passed back when
+ *        when the callback function is invoked.
+ *
+ * @return
+ *
+ * None.
+ *
+ * @note
+ * There is no assert on the CallBackRef since the driver doesn't know what
+ * it is.
+ *
+ *****************************************************************************/
+LONG XEmacPs_SetHandler(XEmacPs *InstancePtr, u32 HandlerType,
+			void *FuncPointer, void *CallBackRef)
+{
+	LONG Status;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(FuncPointer != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	switch (HandlerType) {
+	case XEMACPS_HANDLER_DMASEND:
+		Status = (LONG)(XST_SUCCESS);
+		InstancePtr->SendHandler = ((XEmacPs_Handler)(void *)FuncPointer);
+		InstancePtr->SendRef = CallBackRef;
+		break;
+	case XEMACPS_HANDLER_DMARECV:
+		Status = (LONG)(XST_SUCCESS);
+		InstancePtr->RecvHandler = ((XEmacPs_Handler)(void *)FuncPointer);
+		InstancePtr->RecvRef = CallBackRef;
+		break;
+	case XEMACPS_HANDLER_ERROR:
+		Status = (LONG)(XST_SUCCESS);
+		InstancePtr->ErrorHandler = ((XEmacPs_ErrHandler)(void *)FuncPointer);
+		InstancePtr->ErrorRef = CallBackRef;
+		break;
+	default:
+		Status = (LONG)(XST_INVALID_PARAM);
+		break;
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+* Master interrupt handler for EMAC driver. This routine will query the
+* status of the device, bump statistics, and invoke user callbacks.
+*
+* This routine must be connected to an interrupt controller using OS/BSP
+* specific methods.
+*
+* @param XEmacPsPtr is a pointer to the XEMACPS instance that has caused the
+*        interrupt.
+*
+******************************************************************************/
+void XEmacPs_IntrHandler(void *XEmacPsPtr)
+{
+	u32 RegISR;
+	u32 RegSR;
+	u32 RegCtrl;
+	u32 RegQ1ISR = 0U;
+	XEmacPs *InstancePtr = (XEmacPs *) XEmacPsPtr;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* This ISR will try to handle as many interrupts as it can in a single
+	 * call. However, in most of the places where the user's error handler
+         * is called, this ISR exits because it is expected that the user will
+         * reset the device in nearly all instances.
+	 */
+	RegISR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_ISR_OFFSET);
+
+	/* Read Transmit Q1 ISR */
+
+	if (InstancePtr->Version > 2)
+		RegQ1ISR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_INTQ1_STS_OFFSET);
+
+	/* Clear the interrupt status register */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_ISR_OFFSET,
+			   RegISR);
+
+	/* Receive complete interrupt */
+	if ((RegISR & XEMACPS_IXR_FRAMERX_MASK) != 0x00000000U) {
+		/* Clear RX status register RX complete indication but preserve
+		 * error bits if there is any */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_RXSR_OFFSET,
+				   ((u32)XEMACPS_RXSR_FRAMERX_MASK |
+				   (u32)XEMACPS_RXSR_BUFFNA_MASK));
+		InstancePtr->RecvHandler(InstancePtr->RecvRef);
+	}
+
+	/* Transmit Q1 complete interrupt */
+	if ((InstancePtr->Version > 2) &&
+			((RegQ1ISR & XEMACPS_INTQ1SR_TXCOMPL_MASK) != 0x00000000U)) {
+		/* Clear TX status register TX complete indication but preserve
+		 * error bits if there is any */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_INTQ1_STS_OFFSET,
+				   XEMACPS_INTQ1SR_TXCOMPL_MASK);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_TXSR_OFFSET,
+				   ((u32)XEMACPS_TXSR_TXCOMPL_MASK |
+				   (u32)XEMACPS_TXSR_USEDREAD_MASK));
+		InstancePtr->SendHandler(InstancePtr->SendRef);
+	}
+
+	/* Transmit complete interrupt */
+	if ((RegISR & XEMACPS_IXR_TXCOMPL_MASK) != 0x00000000U) {
+		/* Clear TX status register TX complete indication but preserve
+		 * error bits if there is any */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_TXSR_OFFSET,
+				   ((u32)XEMACPS_TXSR_TXCOMPL_MASK |
+				   (u32)XEMACPS_TXSR_USEDREAD_MASK));
+		InstancePtr->SendHandler(InstancePtr->SendRef);
+	}
+
+	/* Receive error conditions interrupt */
+	if ((RegISR & XEMACPS_IXR_RX_ERR_MASK) != 0x00000000U) {
+		/* Clear RX status register */
+		RegSR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XEMACPS_RXSR_OFFSET);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_RXSR_OFFSET, RegSR);
+
+		/* Fix for CR # 692702. Write to bit 18 of net_ctrl
+		 * register to flush a packet out of Rx SRAM upon
+		 * an error for receive buffer not available. */
+		if ((RegISR & XEMACPS_IXR_RXUSED_MASK) != 0x00000000U) {
+			RegCtrl =
+			XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+						XEMACPS_NWCTRL_OFFSET);
+			RegCtrl |= (u32)XEMACPS_NWCTRL_FLUSH_DPRAM_MASK;
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET, RegCtrl);
+		}
+
+		if(RegSR != 0) {
+			InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
+						XEMACPS_RECV, RegSR);
+		}
+	}
+
+        /* When XEMACPS_IXR_TXCOMPL_MASK is flagged, XEMACPS_IXR_TXUSED_MASK
+         * will be asserted the same time.
+         * Have to distinguish this bit to handle the real error condition.
+         */
+	/* Transmit Q1 error conditions interrupt */
+        if ((InstancePtr->Version > 2) &&
+			((RegQ1ISR & XEMACPS_INTQ1SR_TXERR_MASK) != 0x00000000U) &&
+            ((RegQ1ISR & XEMACPS_INTQ1SR_TXCOMPL_MASK) != 0x00000000U)) {
+			/* Clear Interrupt Q1 status register */
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_INTQ1_STS_OFFSET, RegQ1ISR);
+			InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XEMACPS_SEND,
+					  RegQ1ISR);
+	   }
+
+	/* Transmit error conditions interrupt */
+        if (((RegISR & XEMACPS_IXR_TX_ERR_MASK) != 0x00000000U) &&
+            (!(RegISR & XEMACPS_IXR_TXCOMPL_MASK) != 0x00000000U)) {
+		/* Clear TX status register */
+		RegSR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XEMACPS_TXSR_OFFSET);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_TXSR_OFFSET, RegSR);
+		InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XEMACPS_SEND,
+					  RegSR);
+	}
+
+}
+/** @} */
@@ -0,0 +1,71 @@
+/******************************************************************************
+* Copyright (C) 2010 - 2020 Xilinx, Inc.  All rights reserved.
+* SPDX-License-Identifier: MIT
+******************************************************************************/
+
+/*****************************************************************************/
+/**
+*
+* @file xemacps_sinit.c
+* @addtogroup emacps_v3_11
+* @{
+*
+* This file contains lookup method by device ID when success, it returns
+* pointer to config table to be used to initialize the device.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 New
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+/*************************** Variable Definitions *****************************/
+extern XEmacPs_Config XEmacPs_ConfigTable[XPAR_XEMACPS_NUM_INSTANCES];
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+* Lookup the device configuration based on the unique device ID.  The table
+* contains the configuration info for each device in the system.
+*
+* @param DeviceId is the unique device ID of the device being looked up.
+*
+* @return
+* A pointer to the configuration table entry corresponding to the given
+* device ID, or NULL if no match is found.
+*
+******************************************************************************/
+XEmacPs_Config *XEmacPs_LookupConfig(u16 DeviceId)
+{
+	XEmacPs_Config *CfgPtr = NULL;
+	u32 i;
+
+	for (i = 0U; i < (u32)XPAR_XEMACPS_NUM_INSTANCES; i++) {
+		if (XEmacPs_ConfigTable[i].DeviceId == DeviceId) {
+			CfgPtr = &XEmacPs_ConfigTable[i];
+			break;
+		}
+	}
+
+	return (XEmacPs_Config *)(CfgPtr);
+}
+/** @} */
@@ -21,7 +21,7 @@ static inline void usleep(unsigned long useconds)

 static inline void sleep(unsigned int seconds)
 {
-	rt_thread_delay(seconds);
+	rt_thread_delay(seconds*RT_TICK_PER_SECOND);
 }

 #ifdef __cplusplus
@@ -0,0 +1,15 @@
+import rtconfig
+from building import *
+
+# get current directory
+cwd = GetCurrentDir()
+CPPPATH = [cwd]
+
+# The set of source files associated with this SConscript file.
+
+src = Glob('*.c')
+path = cwd
+
+group = DefineGroup('ZYNQMP_HAL', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2007 - 2019 Xilinx, Inc.
+ * Copyright (C) 2021 WangHuachen.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#ifndef __XADAPTER_H_
+#define __XADAPTER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "lwipopts.h"
+
+#if !NO_SYS
+#ifdef OS_IS_XILKERNEL
+#include "xmk.h"
+#endif
+#include "lwip/sys.h"
+#endif
+
+#include "lwip/netif.h"
+#include "lwip/ip.h"
+
+#include "netif/xtopology.h"
+#include <netif/ethernetif.h>
+
+struct xemac_s {
+	enum xemac_types type;
+	int  topology_index;
+	void *state;
+#if 0
+    sys_sem_t sem_rx_data_available;
+#else
+	struct eth_device *rt_eth_device;
+#endif
+#if defined(OS_IS_FREERTOS) && defined(__arm__) && !defined(ARMR5)
+	TimerHandle_t xTimer;
+#endif
+};
+
+enum ethernet_link_status {
+	ETH_LINK_UNDEFINED = 0,
+	ETH_LINK_UP,
+	ETH_LINK_DOWN,
+	ETH_LINK_NEGOTIATING
+};
+
+void eth_link_detect(struct netif *netif);
+void 		lwip_raw_init();
+int 		xemacif_input(struct netif *netif);
+void 		xemacif_input_thread(struct netif *netif);
+struct netif *	xemac_add(struct netif *netif,
+	ip_addr_t *ipaddr, ip_addr_t *netmask, ip_addr_t *gw,
+	unsigned char *mac_ethernet_address,
+	unsigned mac_baseaddr);
+#if defined (__arm__) || defined (__aarch64__)
+void xemacpsif_resetrx_on_no_rxdata(struct netif *netif);
+#endif
+
+/* global lwip debug variable used for debugging */
+extern int lwip_runtime_debug;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2010 - 2019 Xilinx, Inc.
+ * Copyright (C) 2021 WangHuachen.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#ifndef __NETIF_XEMACPSIF_H__
+#define __NETIF_XEMACPSIF_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "xlwipconfig.h"
+#include "lwip/netif.h"
+#include "netif/etharp.h"
+#include "lwip/sys.h"
+#include "netif/xadapter.h"
+
+#include "xstatus.h"
+#include "sleep.h"
+#include "xparameters.h"
+#include "xparameters_ps.h"	/* defines XPAR values */
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+// #include "xil_exception.h"
+// #include "xpseudo_asm.h"
+#include "xpseudo_asm_gcc.h"
+#include "xil_cache.h"
+#include "xil_printf.h"
+// #include "xscugic.h"
+#include "xemacps.h"		/* defines XEmacPs API */
+
+#include "netif/xpqueue.h"
+#include "xlwipconfig.h"
+
+#if EL1_NONSECURE
+#include "xil_smc.h"
+#endif
+
+#define ZYNQ_EMACPS_0_BASEADDR 0xE000B000
+#define ZYNQ_EMACPS_1_BASEADDR 0xE000C000
+
+#define ZYNQMP_EMACPS_0_BASEADDR 0xFF0B0000
+#define ZYNQMP_EMACPS_1_BASEADDR 0xFF0C0000
+#define ZYNQMP_EMACPS_2_BASEADDR 0xFF0D0000
+#define ZYNQMP_EMACPS_3_BASEADDR 0xFF0E0000
+
+#define CRL_APB_GEM0_REF_CTRL	0xFF5E0050
+#define CRL_APB_GEM1_REF_CTRL	0xFF5E0054
+#define CRL_APB_GEM2_REF_CTRL	0xFF5E0058
+#define CRL_APB_GEM3_REF_CTRL	0xFF5E005C
+
+#define CRL_APB_GEM_DIV0_MASK	0x00003F00
+#define CRL_APB_GEM_DIV0_SHIFT	8
+#define CRL_APB_GEM_DIV1_MASK	0x003F0000
+#define CRL_APB_GEM_DIV1_SHIFT	16
+
+#define VERSAL_EMACPS_0_BASEADDR 0xFF0C0000
+#define VERSAL_EMACPS_1_BASEADDR 0xFF0D0000
+
+#define VERSAL_CRL_GEM0_REF_CTRL	0xFF5E0118
+#define VERSAL_CRL_GEM1_REF_CTRL	0xFF5E011C
+
+#define VERSAL_CRL_GEM_DIV_MASK		0x0003FF00
+#define VERSAL_CRL_APB_GEM_DIV_SHIFT	8
+
+#if defined (ARMR5) || (__aarch64__) || (ARMA53_32) || (__MICROBLAZE__)
+#if defined (USE_JUMBO_FRAMES)
+#define ZYNQMP_USE_JUMBO
+#endif
+#endif
+
+#define GEM_VERSION_ZYNQMP	7
+#define GEM_VERSION_VERSAL	0x107
+
+#define MAX_FRAME_SIZE_JUMBO (XEMACPS_MTU_JUMBO + XEMACPS_HDR_SIZE + XEMACPS_TRL_SIZE)
+
+void 	xemacpsif_setmac(u32_t index, u8_t *addr);
+u8_t*	xemacpsif_getmac(u32_t index);
+err_t 	xemacpsif_init(struct netif *netif);
+s32_t 	xemacpsif_input(struct netif *netif);
+
+/* xaxiemacif_hw.c */
+void 	xemacps_error_handler(XEmacPs * Temac);
+
+/* structure within each netif, encapsulating all information required for
+ * using a particular temac instance
+ */
+typedef struct {
+	XEmacPs emacps;
+
+	/* queue to store overflow packets */
+	pq_queue_t *recv_q;
+	pq_queue_t *send_q;
+
+	/* pointers to memory holding buffer descriptors (used only with SDMA) */
+	void *rx_bdspace;
+	void *tx_bdspace;
+
+	unsigned int last_rx_frms_cntr;
+
+} xemacpsif_s;
+
+extern xemacpsif_s xemacpsif;
+
+s32_t	is_tx_space_available(xemacpsif_s *emac);
+
+/* xemacpsif_dma.c */
+
+void  process_sent_bds(xemacpsif_s *xemacpsif, XEmacPs_BdRing *txring);
+u32_t phy_setup_emacps (XEmacPs *xemacpsp, u32_t phy_addr);
+void detect_phy(XEmacPs *xemacpsp);
+void emacps_send_handler(void *arg);
+XStatus emacps_sgsend(xemacpsif_s *xemacpsif, struct pbuf *p);
+void emacps_recv_handler(void *arg);
+void emacps_error_handler(void *arg,u8 Direction, u32 ErrorWord);
+void setup_rx_bds(xemacpsif_s *xemacpsif, XEmacPs_BdRing *rxring);
+void HandleTxErrors(struct xemac_s *xemac);
+void HandleEmacPsError(struct xemac_s *xemac);
+XEmacPs_Config *xemacps_lookup_config(unsigned mac_base);
+void init_emacps(xemacpsif_s *xemacps, struct netif *netif);
+void setup_isr (struct xemac_s *xemac);
+XStatus init_dma(struct xemac_s *xemac);
+void start_emacps (xemacpsif_s *xemacps);
+void free_txrx_pbufs(xemacpsif_s *xemacpsif);
+void free_onlytx_pbufs(xemacpsif_s *xemacpsif);
+void init_emacps_on_error (xemacpsif_s *xemacps, struct netif *netif);
+void clean_dma_txdescs(struct xemac_s *xemac);
+void resetrx_on_no_rxdata(xemacpsif_s *xemacpsif);
+void reset_dma(struct xemac_s *xemac);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __NETIF_XAXIEMACIF_H__ */
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2007 - 2019 Xilinx, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#ifndef __LWIP_PBUF_QUEUE_H_
+#define __LWIP_PBUF_QUEUE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define PQ_QUEUE_SIZE 4096
+
+typedef struct {
+	void *data[PQ_QUEUE_SIZE];
+	int head, tail, len;
+} pq_queue_t;
+
+pq_queue_t*	pq_create_queue();
+int 		pq_enqueue(pq_queue_t *q, void *p);
+void*		pq_dequeue(pq_queue_t *q);
+int		pq_qlength(pq_queue_t *q);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007 - 2019 Xilinx, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#ifndef __XTOPOLOGY_H_
+#define __XTOPOLOGY_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum xemac_types { xemac_type_unknown = -1, xemac_type_xps_emaclite, xemac_type_xps_ll_temac, xemac_type_axi_ethernet, xemac_type_emacps };
+
+struct xtopology_t {
+	unsigned emac_baseaddr;
+	enum xemac_types emac_type;
+	unsigned intc_baseaddr;
+	unsigned intc_emac_intr;	/* valid only for xemac_type_xps_emaclite */
+	unsigned scugic_baseaddr; /* valid only for Zynq */
+	unsigned scugic_emac_intr; /* valid only for GEM */
+};
+
+extern int xtopology_n_emacs;
+extern struct xtopology_t xtopology[];
+
+int xtopology_find_index(unsigned base);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -0,0 +1,432 @@
+/*
+ * Copyright (C) 2007 - 2019 Xilinx, Inc.
+ * Copyright (C) 2021 WangHuachen.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#include "lwipopts.h"
+#include "xlwipconfig.h"
+#include "xemac_ieee_reg.h"
+
+#if !NO_SYS
+#ifdef OS_IS_XILKERNEL
+#include "xmk.h"
+#include "sys/process.h"
+#endif
+#endif
+
+#include "lwip/mem.h"
+#include "lwip/stats.h"
+#include "lwip/sys.h"
+#include "lwip/ip.h"
+#include "lwip/tcp.h"
+#include "lwip/udp.h"
+#include "lwip/priv/tcp_priv.h"
+
+#include "netif/etharp.h"
+#include "netif/xadapter.h"
+
+#ifdef XLWIP_CONFIG_INCLUDE_EMACLITE
+#include "netif/xemacliteif.h"
+#endif
+
+#ifdef XLWIP_CONFIG_INCLUDE_AXI_ETHERNET
+#include "netif/xaxiemacif.h"
+#endif
+
+#ifdef XLWIP_CONFIG_INCLUDE_GEM
+#include "netif/xemacpsif.h"
+#endif
+
+#if !NO_SYS
+#include "lwip/tcpip.h"
+#endif
+
+#ifdef OS_IS_FREERTOS
+#define THREAD_STACKSIZE 256
+#define LINK_DETECT_THREAD_INTERVAL 1000 /* one second */
+
+void link_detect_thread(void *p);
+#endif
+
+/* global lwip debug variable used for debugging */
+int lwip_runtime_debug = 0;
+
+enum ethernet_link_status eth_link_status = ETH_LINK_UNDEFINED;
+u32_t phyaddrforemac;
+
+void
+lwip_raw_init()
+{
+	ip_init();	/* Doesn't do much, it should be called to handle future changes. */
+#if LWIP_UDP
+	udp_init();	/* Clears the UDP PCB list. */
+#endif
+#if LWIP_TCP
+	tcp_init();	/* Clears the TCP PCB list and clears some internal TCP timers. */
+			/* Note: you must call tcp_fasttmr() and tcp_slowtmr() at the */
+			/* predefined regular intervals after this initialization. */
+#endif
+}
+
+static enum xemac_types
+find_mac_type(unsigned base)
+{
+	int i;
+
+	for (i = 0; i < xtopology_n_emacs; i++) {
+		if (xtopology[i].emac_baseaddr == base)
+			return xtopology[i].emac_type;
+	}
+
+	return xemac_type_unknown;
+}
+
+int
+xtopology_find_index(unsigned base)
+{
+	int i;
+
+	for (i = 0; i < xtopology_n_emacs; i++) {
+		if (xtopology[i].emac_baseaddr == base)
+			return i;
+	}
+
+	return -1;
+}
+
+/*
+ * xemac_add: this is a wrapper around lwIP's netif_add function.
+ * The objective is to provide portability between the different Xilinx MAC's
+ * This function can be used to add both xps_ethernetlite and xps_ll_temac
+ * based interfaces
+ */
+struct netif *
+xemac_add(struct netif *netif,
+	ip_addr_t *ipaddr, ip_addr_t *netmask, ip_addr_t *gw,
+	unsigned char *mac_ethernet_address,
+	unsigned mac_baseaddr)
+{
+	int i;
+
+#ifdef OS_IS_FREERTOS
+	/* Start thread to detect link periodically for Hot Plug autodetect */
+	sys_thread_new("link_detect_thread", link_detect_thread, netif,
+			THREAD_STACKSIZE, tskIDLE_PRIORITY);
+#endif
+
+	/* set mac address */
+	netif->hwaddr_len = 6;
+	for (i = 0; i < 6; i++)
+		netif->hwaddr[i] = mac_ethernet_address[i];
+
+	/* initialize based on MAC type */
+		switch (find_mac_type(mac_baseaddr)) {
+			case xemac_type_xps_emaclite:
+#ifdef XLWIP_CONFIG_INCLUDE_EMACLITE
+				return netif_add(netif, ipaddr, netmask, gw,
+					(void*)(UINTPTR)mac_baseaddr,
+					xemacliteif_init,
+#if NO_SYS
+					ethernet_input
+#else
+					tcpip_input
+#endif
+					);
+#else
+				return NULL;
+#endif
+			case xemac_type_axi_ethernet:
+#ifdef XLWIP_CONFIG_INCLUDE_AXI_ETHERNET
+				return netif_add(netif, ipaddr, netmask, gw,
+					(void*)(UINTPTR)mac_baseaddr,
+					xaxiemacif_init,
+#if NO_SYS
+					ethernet_input
+#else
+					tcpip_input
+#endif
+					);
+#else
+				return NULL;
+#endif
+#if defined (__arm__) || defined (__aarch64__)
+			case xemac_type_emacps:
+#ifdef XLWIP_CONFIG_INCLUDE_GEM
+				return netif_add(netif, ipaddr, netmask, gw,
+						(void*)(UINTPTR)mac_baseaddr,
+						xemacpsif_init,
+#if NO_SYS
+						ethernet_input
+#else
+						tcpip_input
+#endif
+
+						);
+#endif
+#endif
+			default:
+				xil_printf("unable to determine type of EMAC with baseaddress 0x%08x\r\n",
+						mac_baseaddr);
+				return NULL;
+	}
+}
+
+#if 0
+/*
+ * The input thread calls lwIP to process any received packets.
+ * This thread waits until a packet is received (sem_rx_data_available),
+ * and then calls xemacif_input which processes 1 packet at a time.
+ */
+void
+xemacif_input_thread(struct netif *netif)
+{
+	struct xemac_s *emac = (struct xemac_s *)netif->state;
+	while (1) {
+		/* sleep until there are packets to process
+		 * This semaphore is set by the packet receive interrupt
+		 * routine.
+		 */
+		sys_sem_wait(&emac->sem_rx_data_available);
+
+		/* move all received packets to lwIP */
+		xemacif_input(netif);
+	}
+}
+#endif
+
+int
+xemacif_input(struct netif *netif)
+{
+	struct xemac_s *emac = (struct xemac_s *)netif->state;
+
+	int n_packets = 0;
+
+	switch (emac->type) {
+		case xemac_type_xps_emaclite:
+#ifdef XLWIP_CONFIG_INCLUDE_EMACLITE
+			n_packets = xemacliteif_input(netif);
+			break;
+#else
+			// print("incorrect configuration: xps_ethernetlite drivers not present?");
+			while(1);
+			return 0;
+#endif
+		case xemac_type_axi_ethernet:
+#ifdef XLWIP_CONFIG_INCLUDE_AXI_ETHERNET
+			n_packets = xaxiemacif_input(netif);
+			break;
+#else
+			// print("incorrect configuration: axi_ethernet drivers not present?");
+			while(1);
+			return 0;
+#endif
+#if defined (__arm__) || defined (__aarch64__)
+		case xemac_type_emacps:
+#ifdef XLWIP_CONFIG_INCLUDE_GEM
+			n_packets = xemacpsif_input(netif);
+			break;
+#else
+			xil_printf("incorrect configuration: ps7_ethernet drivers not present?\r\n");
+			while(1);
+			return 0;
+#endif
+#endif
+		default:
+			// print("incorrect configuration: unknown temac type");
+			while(1);
+			return 0;
+	}
+
+	return n_packets;
+}
+
+#if defined(XLWIP_CONFIG_INCLUDE_GEM)
+u32_t phy_link_detect(XEmacPs *xemacp, u32_t phy_addr)
+{
+	u16_t status;
+
+	/* Read Phy Status register twice to get the confirmation of the current
+	 * link status.
+	 */
+	XEmacPs_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+	XEmacPs_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+
+	if (status & IEEE_STAT_LINK_STATUS)
+		return 1;
+	return 0;
+}
+#elif defined(XLWIP_CONFIG_INCLUDE_AXI_ETHERNET)
+static u32_t phy_link_detect(XAxiEthernet *xemacp, u32_t phy_addr)
+{
+	u16_t status;
+
+	/* Read Phy Status register twice to get the confirmation of the current
+	 * link status.
+	 */
+	XAxiEthernet_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+	XAxiEthernet_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+
+	if (status & IEEE_STAT_LINK_STATUS)
+		return 1;
+	return 0;
+}
+#elif defined(XLWIP_CONFIG_INCLUDE_EMACLITE)
+static u32_t phy_link_detect(XEmacLite *xemacp, u32_t phy_addr)
+{
+	u16_t status;
+
+	/* Read Phy Status register twice to get the confirmation of the current
+	 * link status.
+	 */
+	XEmacLite_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+	XEmacLite_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+
+	if (status & IEEE_STAT_LINK_STATUS)
+		return 1;
+	return 0;
+}
+#endif
+
+#if defined(XLWIP_CONFIG_INCLUDE_GEM)
+u32_t phy_autoneg_status(XEmacPs *xemacp, u32_t phy_addr)
+{
+	u16_t status;
+
+	/* Read Phy Status register twice to get the confirmation of the current
+	 * link status.
+	 */
+	XEmacPs_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+	XEmacPs_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+
+	if (status & IEEE_STAT_AUTONEGOTIATE_COMPLETE)
+		return 1;
+	return 0;
+}
+#elif defined(XLWIP_CONFIG_INCLUDE_AXI_ETHERNET)
+static u32_t phy_autoneg_status(XAxiEthernet *xemacp, u32_t phy_addr)
+{
+	u16_t status;
+
+	/* Read Phy Status register twice to get the confirmation of the current
+	 * link status.
+	 */
+	XAxiEthernet_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+	XAxiEthernet_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+
+	if (status & IEEE_STAT_AUTONEGOTIATE_COMPLETE)
+		return 1;
+	return 0;
+}
+#elif defined(XLWIP_CONFIG_INCLUDE_EMACLITE)
+static u32_t phy_autoneg_status(XEmacLite *xemacp, u32_t phy_addr)
+{
+	u16_t status;
+
+	/* Read Phy Status register twice to get the confirmation of the current
+	 * link status.
+	 */
+	XEmacLite_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+	XEmacLite_PhyRead(xemacp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
+
+	if (status & IEEE_STAT_AUTONEGOTIATE_COMPLETE)
+		return 1;
+	return 0;
+}
+#endif
+
+void eth_link_detect(struct netif *netif)
+{
+	u32_t link_speed, phy_link_status;
+	struct xemac_s *xemac = (struct xemac_s *)(netif->state);
+
+#if defined(XLWIP_CONFIG_INCLUDE_GEM)
+	xemacpsif_s *xemacs = (xemacpsif_s *)(xemac->state);
+	XEmacPs *xemacp = &xemacs->emacps;
+#elif defined(XLWIP_CONFIG_INCLUDE_AXI_ETHERNET)
+	xaxiemacif_s *xemacs = (xaxiemacif_s *)(xemac->state);
+	XAxiEthernet *xemacp = &xemacs->axi_ethernet;
+#elif defined(XLWIP_CONFIG_INCLUDE_EMACLITE)
+	xemacliteif_s *xemacs = (xemacliteif_s *)(xemac->state);
+	XEmacLite *xemacp = xemacs->instance;
+#endif
+
+	if ((xemacp->IsReady != (u32)XIL_COMPONENT_IS_READY) ||
+			(eth_link_status == ETH_LINK_UNDEFINED))
+		return;
+
+	phy_link_status = phy_link_detect(xemacp, phyaddrforemac);
+
+	if ((eth_link_status == ETH_LINK_UP) && (!phy_link_status))
+		eth_link_status = ETH_LINK_DOWN;
+
+	switch (eth_link_status) {
+		case ETH_LINK_UNDEFINED:
+		case ETH_LINK_UP:
+			return;
+		case ETH_LINK_DOWN:
+			netif_set_link_down(netif);
+			eth_link_status = ETH_LINK_NEGOTIATING;
+			xil_printf("Ethernet Link down\r\n");
+			break;
+		case ETH_LINK_NEGOTIATING:
+			if (phy_link_status &&
+				phy_autoneg_status(xemacp, phyaddrforemac)) {
+
+				/* Initiate Phy setup to get link speed */
+#if defined(XLWIP_CONFIG_INCLUDE_GEM)
+				link_speed = phy_setup_emacps(xemacp,
+								phyaddrforemac);
+				XEmacPs_SetOperatingSpeed(xemacp, link_speed);
+#elif defined(XLWIP_CONFIG_INCLUDE_AXI_ETHERNET)
+				link_speed = phy_setup_axiemac(xemacp);
+				XAxiEthernet_SetOperatingSpeed(xemacp,
+							       link_speed);
+#endif
+				netif_set_link_up(netif);
+				eth_link_status = ETH_LINK_UP;
+				xil_printf("Ethernet Link up\r\n");
+			}
+			break;
+	}
+}
+
+#ifdef OS_IS_FREERTOS
+void link_detect_thread(void *p)
+{
+	struct netif *netif = (struct netif *) p;
+
+	while (1) {
+		/* Call eth_link_detect() every second to detect Ethernet link
+		 * change.
+		 */
+		eth_link_detect(netif);
+		vTaskDelay(LINK_DETECT_THREAD_INTERVAL / portTICK_RATE_MS);
+	}
+}
+#endif
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2018 - 2019 Xilinx, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#ifndef __XEMAC_IEEE_REGS_H_
+#define __XEMAC_IEEE_REGS_H_
+
+/* Advertisement control register. */
+#define ADVERTISE_10HALF            0x0020  /* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL         0x0020  /* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL            0x0040  /* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF         0x0040  /* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF           0x0080  /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE        0x0080  /* Try for 1000BASE-X pause    */
+#define ADVERTISE_100FULL           0x0100  /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM     0x0100  /* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4          0x0200  /* Try for 100mbps 4k packets  */
+
+
+#define ADVERTISE_100_AND_10        (ADVERTISE_10FULL | ADVERTISE_100FULL | \
+					ADVERTISE_10HALF | ADVERTISE_100HALF)
+#define ADVERTISE_100               (ADVERTISE_100FULL | ADVERTISE_100HALF)
+#define ADVERTISE_10                (ADVERTISE_10FULL | ADVERTISE_10HALF)
+
+#define ADVERTISE_1000              0x0300
+
+
+#define IEEE_CONTROL_REG_OFFSET                    0
+#define IEEE_STATUS_REG_OFFSET                     1
+#define IEEE_AUTONEGO_ADVERTISE_REG                4
+#define IEEE_PARTNER_ABILITIES_1_REG_OFFSET        5
+#define IEEE_PARTNER_ABILITIES_2_REG_OFFSET        8
+#define IEEE_PARTNER_ABILITIES_3_REG_OFFSET        10
+#define IEEE_1000_ADVERTISE_REG_OFFSET             9
+#define IEEE_MMD_ACCESS_CONTROL_REG                13
+#define IEEE_MMD_ACCESS_ADDRESS_DATA_REG           14
+#define IEEE_COPPER_SPECIFIC_CONTROL_REG           16
+#define IEEE_SPECIFIC_STATUS_REG                   17
+#define IEEE_COPPER_SPECIFIC_STATUS_REG_2          19
+#define IEEE_EXT_PHY_SPECIFIC_CONTROL_REG          20
+#define IEEE_CONTROL_REG_MAC                       21
+#define IEEE_PAGE_ADDRESS_REGISTER                 22
+
+#define IEEE_CTRL_1GBPS_LINKSPEED_MASK             0x2040
+#define IEEE_CTRL_LINKSPEED_MASK                   0x0040
+#define IEEE_CTRL_LINKSPEED_1000M                  0x0040
+#define IEEE_CTRL_LINKSPEED_100M                   0x2000
+#define IEEE_CTRL_LINKSPEED_10M                    0x0000
+#define IEEE_CTRL_FULL_DUPLEX                      0x100
+#define IEEE_CTRL_RESET_MASK                       0x8000
+#define IEEE_CTRL_AUTONEGOTIATE_ENABLE             0x1000
+#define IEEE_STAT_AUTONEGOTIATE_CAPABLE            0x0008
+#define IEEE_STAT_AUTONEGOTIATE_COMPLETE           0x0020
+#define IEEE_STAT_AUTONEGOTIATE_RESTART            0x0200
+#define IEEE_STAT_LINK_STATUS                      0x0004
+#define IEEE_STAT_1GBPS_EXTENSIONS                 0x0100
+#define IEEE_AN1_ABILITY_MASK                      0x1FE0
+#define IEEE_AN3_ABILITY_MASK_1GBPS                0x0C00
+#define IEEE_AN1_ABILITY_MASK_100MBPS              0x0380
+#define IEEE_AN1_ABILITY_MASK_10MBPS               0x0060
+#define IEEE_RGMII_TXRX_CLOCK_DELAYED_MASK         0x0030
+
+#define IEEE_SPEED_MASK                            0xC000
+#define IEEE_SPEED_1000                            0x8000
+#define IEEE_SPEED_100                             0x4000
+
+#define IEEE_ASYMMETRIC_PAUSE_MASK                 0x0800
+#define IEEE_PAUSE_MASK                            0x0400
+#define IEEE_AUTONEG_ERROR_MASK                    0x8000
+
+#define IEEE_MMD_ACCESS_CTRL_DEVAD_MASK            0x1F
+#define IEEE_MMD_ACCESS_CTRL_PIDEVAD_MASK          0x801F
+#define IEEE_MMD_ACCESS_CTRL_NOPIDEVAD_MASK        0x401F
+
+#endif /* __XEMAC_IEEE_REGS_H_ */
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2010 - 2019 Xilinx, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#include "netif/xemacpsif.h"
+#include "lwipopts.h"
+
+#if XPAR_GIGE_PCS_PMA_1000BASEX_CORE_PRESENT == 1 || \
+	XPAR_GIGE_PCS_PMA_SGMII_CORE_PRESENT == 1
+#define PCM_PMA_CORE_PRESENT
+#else
+#undef PCM_PMA_CORE_PRESENT
+#endif
+
+u32_t link_speed = 100;
+extern XEmacPs_Config XEmacPs_ConfigTable[];
+extern u32_t phymapemac0[32];
+extern u32_t phymapemac1[32];
+extern u32_t phyaddrforemac;
+extern enum ethernet_link_status eth_link_status;
+
+#ifdef OS_IS_FREERTOS
+extern long xInsideISR;
+#endif
+
+XEmacPs_Config *xemacps_lookup_config(unsigned mac_base)
+{
+	XEmacPs_Config *cfgptr = NULL;
+	s32_t i;
+
+	for (i = 0; i < XPAR_XEMACPS_NUM_INSTANCES; i++) {
+		if (XEmacPs_ConfigTable[i].BaseAddress == mac_base) {
+			cfgptr = &XEmacPs_ConfigTable[i];
+			break;
+		}
+	}
+
+	return (cfgptr);
+}
+
+void init_emacps(xemacpsif_s *xemacps, struct netif *netif)
+{
+	XEmacPs *xemacpsp;
+	s32_t status = XST_SUCCESS;
+	u32_t i;
+	u32_t phyfoundforemac0 = FALSE;
+	u32_t phyfoundforemac1 = FALSE;
+
+	xemacpsp = &xemacps->emacps;
+
+#ifdef ZYNQMP_USE_JUMBO
+	XEmacPs_SetOptions(xemacpsp, XEMACPS_JUMBO_ENABLE_OPTION);
+#endif
+
+#ifdef LWIP_IGMP
+	XEmacPs_SetOptions(xemacpsp, XEMACPS_MULTICAST_OPTION);
+#endif
+
+	/* set mac address */
+	status = XEmacPs_SetMacAddress(xemacpsp, (void*)(netif->hwaddr), 1);
+	if (status != XST_SUCCESS) {
+		xil_printf("In %s:Emac Mac Address set failed...\r\n",__func__);
+	}
+
+	XEmacPs_SetMdioDivisor(xemacpsp, MDC_DIV_224);
+
+/*  Please refer to file header comments for the file xemacpsif_physpeed.c
+ *  to know more about the PHY programming sequence.
+ *  For PCS PMA core, phy_setup_emacps is called with the predefined PHY address
+ *  exposed through xaparemeters.h
+ *  For RGMII case, assuming multiple PHYs can be present on the MDIO bus,
+ *  detect_phy is called to get the addresses of the PHY present on
+ *  a particular MDIO bus (emac0 or emac1). This address map is populated
+ *  in phymapemac0 or phymapemac1.
+ *  phy_setup_emacps is then called for each PHY present on the MDIO bus.
+ */
+#ifdef PCM_PMA_CORE_PRESENT
+#ifdef  XPAR_GIGE_PCS_PMA_1000BASEX_CORE_PRESENT
+	link_speed = phy_setup_emacps(xemacpsp, XPAR_PCSPMA_1000BASEX_PHYADDR);
+#elif XPAR_GIGE_PCS_PMA_SGMII_CORE_PRESENT
+	link_speed = phy_setup_emacps(xemacpsp, XPAR_PCSPMA_SGMII_PHYADDR);
+#endif
+#else
+	detect_phy(xemacpsp);
+	for (i = 31; i > 0; i--) {
+		if (xemacpsp->Config.BaseAddress == XPAR_XEMACPS_0_BASEADDR) {
+			if (phymapemac0[i] == TRUE) {
+				link_speed = phy_setup_emacps(xemacpsp, i);
+				phyfoundforemac0 = TRUE;
+				phyaddrforemac = i;
+			}
+		} else {
+			if (phymapemac1[i] == TRUE) {
+				link_speed = phy_setup_emacps(xemacpsp, i);
+				phyfoundforemac1 = TRUE;
+				phyaddrforemac = i;
+			}
+		}
+	}
+	/* If no PHY was detected, use broadcast PHY address of 0 */
+	if (xemacpsp->Config.BaseAddress == XPAR_XEMACPS_0_BASEADDR) {
+		if (phyfoundforemac0 == FALSE)
+			link_speed = phy_setup_emacps(xemacpsp, 0);
+	} else {
+		if (phyfoundforemac1 == FALSE)
+			link_speed = phy_setup_emacps(xemacpsp, 0);
+	}
+#endif
+
+	if (link_speed == XST_FAILURE) {
+		eth_link_status = ETH_LINK_DOWN;
+		xil_printf("Phy setup failure %s \n\r",__func__);
+		return;
+	} else {
+		eth_link_status = ETH_LINK_UP;
+	}
+
+	XEmacPs_SetOperatingSpeed(xemacpsp, link_speed);
+	/* Setting the operating speed of the MAC needs a delay. */
+	{
+		volatile s32_t wait;
+		for (wait=0; wait < 20000; wait++);
+	}
+}
+
+void init_emacps_on_error (xemacpsif_s *xemacps, struct netif *netif)
+{
+	XEmacPs *xemacpsp;
+	s32_t status = XST_SUCCESS;
+
+	xemacpsp = &xemacps->emacps;
+
+	/* set mac address */
+	status = XEmacPs_SetMacAddress(xemacpsp, (void*)(netif->hwaddr), 1);
+	if (status != XST_SUCCESS) {
+		xil_printf("In %s:Emac Mac Address set failed...\r\n",__func__);
+	}
+
+	XEmacPs_SetOperatingSpeed(xemacpsp, link_speed);
+
+	/* Setting the operating speed of the MAC needs a delay. */
+	{
+		volatile s32_t wait;
+		for (wait=0; wait < 20000; wait++);
+	}
+}
+
+void setup_isr (struct xemac_s *xemac)
+{
+	xemacpsif_s   *xemacpsif;
+
+	xemacpsif = (xemacpsif_s *)(xemac->state);
+	/*
+	 * Setup callbacks
+	 */
+	XEmacPs_SetHandler(&xemacpsif->emacps, XEMACPS_HANDLER_DMASEND,
+				     (void *) emacps_send_handler,
+				     (void *) xemac);
+
+	XEmacPs_SetHandler(&xemacpsif->emacps, XEMACPS_HANDLER_DMARECV,
+				    (void *) emacps_recv_handler,
+				    (void *) xemac);
+
+	XEmacPs_SetHandler(&xemacpsif->emacps, XEMACPS_HANDLER_ERROR,
+				    (void *) emacps_error_handler,
+				    (void *) xemac);
+}
+
+void start_emacps (xemacpsif_s *xemacps)
+{
+	/* start the temac */
+	XEmacPs_Start(&xemacps->emacps);
+}
+
+void restart_emacps_transmitter (xemacpsif_s *xemacps) {
+	u32_t Reg;
+	Reg = XEmacPs_ReadReg(xemacps->emacps.Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET);
+	Reg = Reg & (~XEMACPS_NWCTRL_TXEN_MASK);
+	XEmacPs_WriteReg(xemacps->emacps.Config.BaseAddress,
+										XEMACPS_NWCTRL_OFFSET, Reg);
+
+	Reg = XEmacPs_ReadReg(xemacps->emacps.Config.BaseAddress,
+						XEMACPS_NWCTRL_OFFSET);
+	Reg = Reg | (XEMACPS_NWCTRL_TXEN_MASK);
+	XEmacPs_WriteReg(xemacps->emacps.Config.BaseAddress,
+										XEMACPS_NWCTRL_OFFSET, Reg);
+}
+
+void emacps_error_handler(void *arg,u8 Direction, u32 ErrorWord)
+{
+	struct xemac_s *xemac;
+	xemacpsif_s   *xemacpsif;
+	XEmacPs_BdRing *rxring;
+	XEmacPs_BdRing *txring;
+#ifdef OS_IS_FREERTOS
+	xInsideISR++;
+#endif
+
+	xemac = (struct xemac_s *)(arg);
+	xemacpsif = (xemacpsif_s *)(xemac->state);
+	rxring = &XEmacPs_GetRxRing(&xemacpsif->emacps);
+	txring = &XEmacPs_GetTxRing(&xemacpsif->emacps);
+
+	if (ErrorWord != 0) {
+		switch (Direction) {
+			case XEMACPS_RECV:
+			if (ErrorWord & XEMACPS_RXSR_HRESPNOK_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Receive DMA error\r\n"));
+				HandleEmacPsError(xemac);
+			}
+			if (ErrorWord & XEMACPS_RXSR_RXOVR_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Receive over run\r\n"));
+				emacps_recv_handler(arg);
+				setup_rx_bds(xemacpsif, rxring);
+			}
+			if (ErrorWord & XEMACPS_RXSR_BUFFNA_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Receive buffer not available\r\n"));
+				emacps_recv_handler(arg);
+				setup_rx_bds(xemacpsif, rxring);
+			}
+			break;
+			case XEMACPS_SEND:
+			if (ErrorWord & XEMACPS_TXSR_HRESPNOK_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Transmit DMA error\r\n"));
+				HandleEmacPsError(xemac);
+			}
+			if (ErrorWord & XEMACPS_TXSR_URUN_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Transmit under run\r\n"));
+				HandleTxErrors(xemac);
+			}
+			if (ErrorWord & XEMACPS_TXSR_BUFEXH_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Transmit buffer exhausted\r\n"));
+				HandleTxErrors(xemac);
+			}
+			if (ErrorWord & XEMACPS_TXSR_RXOVR_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Transmit retry excessed limits\r\n"));
+				HandleTxErrors(xemac);
+			}
+			if (ErrorWord & XEMACPS_TXSR_FRAMERX_MASK) {
+				LWIP_DEBUGF(NETIF_DEBUG, ("Transmit collision\r\n"));
+				// process_sent_bds(xemacpsif, txring);
+			}
+			break;
+		}
+	}
+#ifdef OS_IS_FREERTOS
+	xInsideISR--;
+#endif
+}
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2010 - 2019 Xilinx, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#ifndef __XEMACPSIF_HW_H_
+#define __XEMACPSIF_HW_H_
+
+#include "netif/xemacpsif.h"
+#include "lwip/netif.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+XEmacPs_Config * lookup_config(unsigned mac_base);
+
+void init_emacps(xemacpsif_s *xemacpsif, struct netif *netif);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2001, 2002 Swedish Institute of Computer Science.
+ * Copyright (C) 2007 - 2018 Xilinx, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef __XLWIPCONFIG_H_
+#define __XLWIPCONFIG_H_
+
+
+/* This is a generated file - do not edit */
+
+#define XLWIP_CONFIG_INCLUDE_GEM 1
+#define XLWIP_CONFIG_EMAC_NUMBER 0
+#define XLWIP_CONFIG_N_TX_DESC 64
+#define XLWIP_CONFIG_N_RX_DESC 64
+
+#endif
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2007 - 2019 Xilinx, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ */
+
+#include <stdlib.h>
+
+#include "netif/xpqueue.h"
+#include "xil_printf.h"
+
+#define NUM_QUEUES	2
+
+pq_queue_t pq_queue[NUM_QUEUES];
+
+pq_queue_t *
+pq_create_queue()
+{
+	static int i;
+	pq_queue_t *q = NULL;
+
+	if (i >= NUM_QUEUES) {
+		xil_printf("ERR: Max Queues allocated\n\r");
+		return q;
+	}
+
+	q = &pq_queue[i++];
+
+	if (!q)
+		return q;
+
+	q->head = q->tail = q->len = 0;
+
+	return q;
+}
+
+int
+pq_enqueue(pq_queue_t *q, void *p)
+{
+	if (q->len == PQ_QUEUE_SIZE)
+		return -1;
+
+	q->data[q->head] = p;
+	q->head = (q->head + 1)%PQ_QUEUE_SIZE;
+	q->len++;
+
+	return 0;
+}
+
+void*
+pq_dequeue(pq_queue_t *q)
+{
+	int ptail;
+
+	if (q->len == 0)
+		return NULL;
+
+	ptail = q->tail;
+	q->tail = (q->tail + 1)%PQ_QUEUE_SIZE;
+	q->len--;
+
+	return q->data[ptail];
+}
+
+int
+pq_qlength(pq_queue_t *q)
+{
+	return q->len;
+}
@@ -0,0 +1,15 @@
+#include "netif/xtopology.h"
+#include "xparameters.h"
+
+struct xtopology_t xtopology[] = {
+	{
+		0xFF0E0000,
+		xemac_type_emacps,
+		0x0,
+		0x0,
+		0xF8F00100,
+		XPAR_XEMACPS_3_INTR,
+	},
+};
+
+int xtopology_n_emacs = 1;
@@ -54,6 +54,9 @@ typedef long LONG;
 typedef unsigned long ULONG;
 #endif

+#define ULONG64_HI_MASK	0xFFFFFFFF00000000U
+#define ULONG64_LO_MASK	~ULONG64_HI_MASK
+
 /** @{ */
 /**
 * This data type defines an interrupt handler for a device.
@@ -0,0 +1,349 @@
+/*
+ * Copyright (c) 2021, WangHuachen
+ *
+ * SPDX-License-Identifier: MIT
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-5-10     WangHuachen  the first version
+ */
+
+
+#include "board.h"
+#include <netif/ethernetif.h>
+#include "lwipopts.h"
+#include "lwip/opt.h"
+#include "drv_eth.h"
+#include "lwip/netif.h"
+#include "netif/xadapter.h"
+#include "netif/xemacpsif.h"
+#include "xparameters.h"
+#include "xemacps.h"
+
+#define DBG_TAG             "drv.emac"
+#define DBG_LEVEL           DBG_INFO
+#include <rtdbg.h>
+
+#define MAC_BASE_ADDR       XPAR_PSU_ETHERNET_3_BASEADDR
+#define MAX_ADDR_LEN        6
+
+struct rt_zynqmp_eth
+{
+    /* inherit from ethernet device */
+    struct eth_device parent;
+
+    /* interface address info, hw address */
+    rt_uint8_t  dev_addr[MAX_ADDR_LEN];
+
+    struct xemac_s *xemac;
+};
+
+static struct rt_zynqmp_eth zynqmp_eth_device;
+extern XEmacPs_Config *mac_config;
+extern struct netif *NetIf;
+
+static void rt_hw_eth_isr(int irqno, void *param)
+{
+    struct rt_zynqmp_eth *eth_dev = (struct rt_zynqmp_eth *)param;
+    xemacpsif_s *xemacpsif = (xemacpsif_s *)eth_dev->xemac->state;
+    XEmacPs_IntrHandler(&xemacpsif->emacps);
+}
+
+extern enum ethernet_link_status eth_link_status;
+extern u32_t phy_link_detect(XEmacPs *xemacp, u32_t phy_addr);
+extern u32_t phy_autoneg_status(XEmacPs *xemacp, u32_t phy_addr);
+extern u32_t phyaddrforemac;
+
+void rt_zynqmp_eth_link_detect(struct rt_zynqmp_eth *eth_dev)
+{
+    u32_t link_speed, phy_link_status;
+    struct xemac_s *xemac = eth_dev->xemac;
+    xemacpsif_s *xemacs = (xemacpsif_s *)(xemac->state);
+    XEmacPs *xemacp = &xemacs->emacps;
+
+    if ((xemacp->IsReady != (u32)XIL_COMPONENT_IS_READY) ||
+            (eth_link_status == ETH_LINK_UNDEFINED))
+        return;
+    
+    phy_link_status = phy_link_detect(xemacp, phyaddrforemac);
+
+    if ((eth_link_status == ETH_LINK_UP) && (!phy_link_status))
+        eth_link_status = ETH_LINK_DOWN;
+
+    switch (eth_link_status) {
+        case ETH_LINK_UNDEFINED:
+        case ETH_LINK_UP:
+            return;
+        case ETH_LINK_DOWN:
+            eth_device_linkchange(&zynqmp_eth_device.parent, RT_FALSE);
+            eth_link_status = ETH_LINK_NEGOTIATING;
+            LOG_D("Ethernet Link down");
+            break;
+        case ETH_LINK_NEGOTIATING:
+            if (phy_link_status &&
+                phy_autoneg_status(xemacp, phyaddrforemac)) {
+
+                /* Initiate Phy setup to get link speed */
+                link_speed = phy_setup_emacps(xemacp,
+                                phyaddrforemac);
+                XEmacPs_SetOperatingSpeed(xemacp, link_speed);
+
+                eth_device_linkchange(&zynqmp_eth_device.parent, RT_TRUE);
+                eth_link_status = ETH_LINK_UP;
+                LOG_D("Ethernet Link up");
+            }
+            break;
+    }
+}
+
+static void phy_monitor_thread(void *parameter)
+{
+    struct rt_zynqmp_eth *eth_dev = (struct rt_zynqmp_eth *)parameter;
+
+    while (1)
+    {
+        rt_zynqmp_eth_link_detect(eth_dev);
+        rt_thread_delay(RT_TICK_PER_SECOND);
+    }
+}
+
+static rt_err_t rt_zynqmp_eth_init(rt_device_t dev)
+{
+    struct rt_zynqmp_eth *eth_dev = (struct rt_zynqmp_eth *)dev->user_data;
+    struct netif *netif = eth_dev->parent.netif;
+    struct xemac_s *xemac;
+    xemacpsif_s *xemacpsif;
+    u32 dmacrreg;
+    s32_t status = XST_SUCCESS;
+    struct xtopology_t *xtopologyp;
+
+    if (eth_dev->xemac != RT_NULL)
+    {
+        LOG_W("rt_zynqmp_eth_init: device has been initialized");
+        return -RT_ERROR;
+    }
+
+    NetIf = netif;
+
+    xemacpsif = rt_malloc(sizeof *xemacpsif);
+    if (xemacpsif == NULL)
+    {
+        LOG_E("rt_zynqmp_eth_init: out of memory");
+        return -RT_ENOMEM;
+    }
+
+    xemac = rt_malloc(sizeof *xemac);
+    if (xemac == NULL)
+    {
+        LOG_E("rt_zynqmp_eth_init: out of memory");
+        return -RT_ENOMEM;
+    }
+
+    xemac->state = (void *)xemacpsif;
+    xemac->topology_index = xtopology_find_index(MAC_BASE_ADDR);
+    xemac->type = xemac_type_emacps;
+    xemac->rt_eth_device = &eth_dev->parent;
+
+    xemacpsif->send_q = NULL;
+    xemacpsif->recv_q = pq_create_queue();
+    if (!xemacpsif->recv_q)
+        return -RT_ENOMEM;
+
+    eth_dev->xemac = xemac;
+
+    /* obtain config of this emac */
+    mac_config = (XEmacPs_Config *)xemacps_lookup_config(MAC_BASE_ADDR);
+
+    status = XEmacPs_CfgInitialize(&xemacpsif->emacps, mac_config,
+                                   mac_config->BaseAddress);
+    if (status != XST_SUCCESS)
+    {
+        LOG_W("In %s:EmacPs Configuration Failed....", __func__);
+        return -RT_ERROR;
+    }
+
+    /* initialize the mac */
+    init_emacps(xemacpsif, netif);
+
+    dmacrreg = XEmacPs_ReadReg(xemacpsif->emacps.Config.BaseAddress,
+                               XEMACPS_DMACR_OFFSET);
+    dmacrreg = dmacrreg | (0x00000010);
+    XEmacPs_WriteReg(xemacpsif->emacps.Config.BaseAddress,
+                     XEMACPS_DMACR_OFFSET, dmacrreg);
+
+    setup_isr(xemac);
+    init_dma(xemac);
+    
+    xtopologyp = &xtopology[xemac->topology_index];
+    /*
+    * Connect the device driver handler that will be called when an
+    * interrupt for the device occurs, the handler defined above performs
+    * the specific interrupt processing for the device.
+    */
+    rt_hw_interrupt_install(xtopologyp->scugic_emac_intr, rt_hw_eth_isr, (void *)eth_dev, "eth");
+    /*
+    * Enable the interrupt for emacps.
+    */
+    rt_hw_interrupt_umask(xtopologyp->scugic_emac_intr);
+
+    start_emacps(xemacpsif);
+
+    if (eth_link_status == ETH_LINK_UP)
+        eth_device_linkchange(&eth_dev->parent, RT_TRUE);
+    
+    rt_thread_t tid;
+    tid = rt_thread_create("phylnk",
+                           phy_monitor_thread,
+                           eth_dev,
+                           1024,
+                           RT_THREAD_PRIORITY_MAX - 2,
+                           2);
+    if (tid != RT_NULL)
+        rt_thread_startup(tid);
+    else
+        return -RT_ERROR;
+
+    return RT_EOK;
+}
+
+static rt_err_t rt_zynqmp_eth_open(rt_device_t dev, rt_uint16_t oflag)
+{
+    LOG_D("emac open");
+    return RT_EOK;
+}
+
+static rt_err_t rt_zynqmp_eth_close(rt_device_t dev)
+{
+    LOG_D("emac close");
+    return RT_EOK;
+}
+
+static rt_size_t rt_zynqmp_eth_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
+{
+    LOG_D("emac read");
+    rt_set_errno(-RT_ENOSYS);
+    return 0;
+}
+
+static rt_size_t rt_zynqmp_eth_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
+{
+    LOG_D("emac write");
+    rt_set_errno(-RT_ENOSYS);
+    return 0;
+}
+
+static rt_err_t rt_zynqmp_eth_control(rt_device_t dev, int cmd, void *args)
+{
+    struct rt_zynqmp_eth *eth_dev = (struct rt_zynqmp_eth *)dev->user_data;
+    switch (cmd)
+    {
+    case NIOCTL_GADDR:
+        /* get mac address */
+        if (args) rt_memcpy(args, eth_dev->dev_addr, 6);
+        else return -RT_ERROR;
+        break;
+
+    default :
+        break;
+    }
+
+    return RT_EOK;
+}
+
+extern err_t _unbuffered_low_level_output(xemacpsif_s *xemacpsif, struct pbuf *p);
+rt_err_t rt_zynqmp_eth_tx(rt_device_t dev, struct pbuf *p)
+{
+    rt_base_t lev;
+    rt_err_t err;
+    XEmacPs_BdRing *txring;
+
+    struct rt_zynqmp_eth *eth_dev = (struct rt_zynqmp_eth *)dev->user_data;
+    struct xemac_s *xemac = eth_dev->xemac;
+    xemacpsif_s *xemacpsif = (xemacpsif_s *)(xemac->state);
+
+    lev = rt_hw_interrupt_disable();
+
+    txring = &(XEmacPs_GetTxRing(&xemacpsif->emacps));
+    process_sent_bds(xemacpsif, txring);
+
+    if (is_tx_space_available(xemacpsif))
+    {
+        _unbuffered_low_level_output(xemacpsif, p);
+        err = RT_EOK;
+    }
+    else
+    {
+#if LINK_STATS
+        lwip_stats.link.drop++;
+#endif
+        LOG_D("pack dropped, no space");
+        err = -RT_ENOMEM;
+    }
+
+    rt_hw_interrupt_enable(lev);
+
+    return err;
+}
+
+struct pbuf *rt_zynqmp_eth_rx(rt_device_t dev)
+{
+    rt_base_t lev;
+    struct rt_zynqmp_eth *eth_dev = (struct rt_zynqmp_eth *)dev->user_data;
+    struct xemac_s *xemac = eth_dev->xemac;
+    xemacpsif_s *xemacpsif = (xemacpsif_s *)(xemac->state);
+    struct pbuf *p;
+
+    lev = rt_hw_interrupt_disable();
+
+    /* see if there is data to process */
+    if (pq_qlength(xemacpsif->recv_q) == 0)
+        return NULL;
+
+    /* return one packet from receive q */
+    p = (struct pbuf *)pq_dequeue(xemacpsif->recv_q);
+
+    rt_hw_interrupt_enable(lev);
+
+    return p;
+}
+
+static int rt_hw_zynqmp_eth_init(void)
+{
+    rt_err_t state = RT_EOK;
+
+    zynqmp_eth_device.xemac = RT_NULL;
+
+    zynqmp_eth_device.dev_addr[0] = 0x00;
+    zynqmp_eth_device.dev_addr[1] = 0x0A;
+    zynqmp_eth_device.dev_addr[2] = 0x35;
+    zynqmp_eth_device.dev_addr[3] = 0x00;
+    zynqmp_eth_device.dev_addr[4] = 0x01;
+    zynqmp_eth_device.dev_addr[5] = 0x02;
+
+    zynqmp_eth_device.parent.parent.init       = rt_zynqmp_eth_init;
+    zynqmp_eth_device.parent.parent.open       = rt_zynqmp_eth_open;
+    zynqmp_eth_device.parent.parent.close      = rt_zynqmp_eth_close;
+    zynqmp_eth_device.parent.parent.read       = rt_zynqmp_eth_read;
+    zynqmp_eth_device.parent.parent.write      = rt_zynqmp_eth_write;
+    zynqmp_eth_device.parent.parent.control    = rt_zynqmp_eth_control;
+    zynqmp_eth_device.parent.parent.user_data  = &zynqmp_eth_device;
+
+    zynqmp_eth_device.parent.eth_rx     = rt_zynqmp_eth_rx;
+    zynqmp_eth_device.parent.eth_tx     = rt_zynqmp_eth_tx;
+
+    /* register eth device */
+    state = eth_device_init(&(zynqmp_eth_device.parent), "e0");
+    if (RT_EOK == state)
+    {
+        LOG_D("emac device init success");
+    }
+    else
+    {
+        LOG_E("emac device init faild: %d", state);
+        state = -RT_ERROR;
+        return state;
+    }
+
+    return state;
+}
+INIT_DEVICE_EXPORT(rt_hw_zynqmp_eth_init);
@@ -0,0 +1,13 @@
+#ifndef __DRV_ETH_H__
+#define __DRV_ETH_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -19,6 +19,9 @@
 #define RT_USING_TIMER_SOFT
 #define RT_TIMER_THREAD_PRIO 4
 #define RT_TIMER_THREAD_STACK_SIZE 512
+
+/* kservice optimization */
+
 #define RT_DEBUG

 /* Inter-Thread communication */
@@ -32,7 +35,7 @@
 /* Memory Management */

 #define RT_USING_MEMPOOL
-#define RT_USING_SMALL_MEM
+#define RT_USING_SLAB
 #define RT_USING_HEAP

 /* Kernel Device Object */
@@ -41,7 +44,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart0"
-#define RT_VER_NUM 0x40003
+#define RT_VER_NUM 0x40004

 /* RT-Thread Components */

@@ -83,6 +86,8 @@
 #define RT_DFS_ELM_WORD_ACCESS
 #define RT_DFS_ELM_USE_LFN_3
 #define RT_DFS_ELM_USE_LFN 3
+#define RT_DFS_ELM_LFN_UNICODE_0
+#define RT_DFS_ELM_LFN_UNICODE 0
 #define RT_DFS_ELM_MAX_LFN 255
 #define RT_DFS_ELM_DRIVES 2
 #define RT_DFS_ELM_MAX_SECTOR_SIZE 512
@@ -93,6 +98,9 @@

 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
+#define RT_USING_SYSTEM_WORKQUEUE
+#define RT_SYSTEM_WORKQUEUE_STACKSIZE 2048
+#define RT_SYSTEM_WORKQUEUE_PRIORITY 23
 #define RT_USING_SERIAL
 #define RT_SERIAL_USING_DMA
 #define RT_SERIAL_RB_BUFSZ 64
@@ -101,24 +109,77 @@
 /* Using USB */


-/* Using RapidIO */
-
-
 /* POSIX layer and C standard library */

 #define RT_USING_LIBC
 #define RT_USING_POSIX
+#define RT_LIBC_FIXED_TIMEZONE 8

 /* Network */

 /* Socket abstraction layer */

+#define RT_USING_SAL
+#define SAL_INTERNET_CHECK
+
+/* protocol stack implement */
+
+#define SAL_USING_LWIP
+#define SAL_USING_POSIX

 /* Network interface device */

+#define RT_USING_NETDEV
+#define NETDEV_USING_IFCONFIG
+#define NETDEV_USING_PING
+#define NETDEV_USING_NETSTAT
+#define NETDEV_USING_AUTO_DEFAULT
+#define NETDEV_IPV4 1
+#define NETDEV_IPV6 0

 /* light weight TCP/IP stack */

+#define RT_USING_LWIP
+#define RT_USING_LWIP202
+#define RT_LWIP_MEM_ALIGNMENT 32
+#define RT_LWIP_IGMP
+#define RT_LWIP_ICMP
+#define RT_LWIP_DNS
+#define RT_LWIP_DHCP
+#define IP_SOF_BROADCAST 1
+#define IP_SOF_BROADCAST_RECV 1
+
+/* Static IPv4 Address */
+
+#define RT_LWIP_IPADDR "192.168.1.30"
+#define RT_LWIP_GWADDR "192.168.1.1"
+#define RT_LWIP_MSKADDR "255.255.255.0"
+#define RT_LWIP_UDP
+#define RT_LWIP_TCP
+#define RT_LWIP_RAW
+#define RT_MEMP_NUM_NETCONN 8
+#define RT_LWIP_PBUF_NUM 256
+#define RT_LWIP_RAW_PCB_NUM 4
+#define RT_LWIP_UDP_PCB_NUM 4
+#define RT_LWIP_TCP_PCB_NUM 4
+#define RT_LWIP_TCP_SEG_NUM 40
+#define RT_LWIP_TCP_SND_BUF 8196
+#define RT_LWIP_TCP_WND 8196
+#define RT_LWIP_TCPTHREAD_PRIORITY 10
+#define RT_LWIP_TCPTHREAD_MBOX_SIZE 8
+#define RT_LWIP_TCPTHREAD_STACKSIZE 2048
+#define RT_LWIP_ETHTHREAD_PRIORITY 12
+#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
+#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
+#define LWIP_NETIF_STATUS_CALLBACK 1
+#define LWIP_NETIF_LINK_CALLBACK 1
+#define SO_REUSE 1
+#define LWIP_SO_RCVTIMEO 1
+#define LWIP_SO_SNDTIMEO 1
+#define LWIP_SO_RCVBUF 1
+#define LWIP_SO_LINGER 0
+#define LWIP_NETIF_LOOPBACK 0
+#define RT_LWIP_USING_PING

 /* AT commands */

@@ -129,6 +190,9 @@
 /* Utilities */


+/* RT-Thread Utestcases */
+
+
 /* RT-Thread online packages */

 /* IoT - internet of things */
@@ -166,11 +230,17 @@
 /* peripheral libraries and drivers */


+/* AI packages */
+
+
 /* miscellaneous packages */


 /* samples: kernel and components samples */

+
+/* entertainment: terminal games and other interesting software packages */
+
 #define SOC_ZYNQMP_R5

 /* Hardware Drivers Config */
@@ -184,6 +254,13 @@
 #define BSP_USING_SDIO
 #define BSP_USING_SD0

+/* Please set RT_LWIP_PBUF_NUM is at least 256 if Enable Ethernet! */
+
+/* Please set RT_LWIP_MEM_ALIGNMENT is at 32 if Enable Ethernet! */
+
+#define BSP_USING_ETH
+#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
+
 /* Board extended module Drivers */


@@ -1,11 +1,13 @@
 /*
 * Copyright (c) 2006-2021, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
+ * Copyright (c) 2014 - 2020 Xilinx, Inc.  All rights reserved.
+ * Copyright (c) 2021 WangHuachen.  All rights reserved.
+ * SPDX-License-Identifier: MIT
 *
 * Change Logs:
 * Date           Author       Notes
 * 2020-03-19     WangHuachen  first version
+ * 2021-05-10     WangHuachen  add more functions
 */
 #include <rthw.h>
 #include <rtdef.h>
@@ -44,41 +46,85 @@ typedef rt_uint32_t u32;
        XREG_CP15_INVAL_IC_LINE_MVA_POU :: "r" (param))
 #endif

+void Xil_DCacheEnable(void);
+void Xil_DCacheDisable(void);
+void Xil_DCacheInvalidate(void);
+void Xil_DCacheInvalidateRange(INTPTR adr, u32 len);
+void Xil_DCacheFlush(void);
+void Xil_DCacheFlushRange(INTPTR adr, u32 len);
+void Xil_DCacheInvalidateLine(INTPTR adr);
+void Xil_DCacheFlushLine(INTPTR adr);
+void Xil_DCacheStoreLine(INTPTR adr);
+void Xil_ICacheEnable(void);
+void Xil_ICacheDisable(void);
+void Xil_ICacheInvalidate(void);
+void Xil_ICacheInvalidateRange(INTPTR adr, u32 len);
+void Xil_ICacheInvalidateLine(INTPTR adr);

-void Xil_ICacheInvalidateRange(INTPTR adr, u32 len)
+void Xil_DCacheEnable(void)
+{
+    register u32 CtrlReg;
+
+    /* enable caches only if they are disabled */
+#if defined (__GNUC__)
+    CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+#elif defined (__ICCARM__)
+     mfcp(XREG_CP15_SYS_CONTROL,CtrlReg);
+#endif
+    if ((CtrlReg & XREG_CP15_CONTROL_C_BIT)==0x00000000U) {
+        /* invalidate the Data cache */
+        Xil_DCacheInvalidate();
+
+        /* enable the Data cache */
+        CtrlReg |= (XREG_CP15_CONTROL_C_BIT);
+
+        mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+    }
+}
+
+void Xil_DCacheDisable(void)
+{
+    register u32 CtrlReg;
+
+    /* clean and invalidate the Data cache */
+    Xil_DCacheFlush();
+
+    /* disable the Data cache */
+#if defined (__GNUC__)
+    CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+#elif defined (__ICCARM__)
+     mfcp(XREG_CP15_SYS_CONTROL,CtrlReg);
+#endif
+
+    CtrlReg &= ~(XREG_CP15_CONTROL_C_BIT);
+
+    mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+}
+
+void Xil_DCacheInvalidate(void)
 {
-    u32 LocalAddr = adr;
-    const u32 cacheline = 32U;
-    u32 end;
    u32 currmask;

    currmask = mfcpsr();
    mtcpsr(currmask | IRQ_FIQ_MASK);
-    if (len != 0x00000000U) {
-        /* Back the starting address up to the start of a cache line
-         * perform cache operations until adr+len
-         */
-        end = LocalAddr + len;
-        LocalAddr = LocalAddr & ~(cacheline - 1U);

-        /* Select cache L0 I-cache in CSSR */
-        mtcp(XREG_CP15_CACHE_SIZE_SEL, 1U);
+#if 0
+    stack_end = (u32 )&_stack_end;
+    stack_start = (u32 )&__undef_stack;
+    stack_size = stack_start-stack_end;

-        while (LocalAddr < end) {
+    /* Flush stack memory to save return address */
+    Xil_DCacheFlushRange(stack_end, stack_size);
+#endif
+    mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);

-            /* Invalidate L1 I-cache line */
-            asm_inval_ic_line_mva_pou(LocalAddr);
+    /*invalidate all D cache*/
+    mtcp(XREG_CP15_INVAL_DC_ALL, 0);

-            LocalAddr += cacheline;
-        }
-    }
-
-    /* Wait for invalidate to complete */
-    dsb();
    mtcpsr(currmask);
 }

-void Xil_DCacheFlushLine(INTPTR adr)
+void Xil_DCacheInvalidateLine(INTPTR adr)
 {
    u32 currmask;

@@ -86,11 +132,11 @@ void Xil_DCacheFlushLine(INTPTR adr)
    mtcpsr(currmask | IRQ_FIQ_MASK);

    mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+    mtcp(XREG_CP15_INVAL_DC_LINE_MVA_POC, (adr & (~0x1F)));

-    mtcp(XREG_CP15_CLEAN_INVAL_DC_LINE_MVA_POC, (adr & (~0x1F)));
-
-        /* Wait for flush to complete */
+        /* Wait for invalidate to complete */
    dsb();
+
    mtcpsr(currmask);
 }

@@ -135,6 +181,79 @@ void Xil_DCacheInvalidateRange(INTPTR adr, u32 len)
    mtcpsr(currmask);
 }

+void Xil_DCacheFlush(void)
+{
+    register u32 CsidReg, C7Reg;
+    u32 CacheSize, LineSize, NumWays;
+    u32 Way, WayIndex, Set, SetIndex, NumSet;
+    u32 currmask;
+
+    currmask = mfcpsr();
+    mtcpsr(currmask | IRQ_FIQ_MASK);
+
+    /* Select cache level 0 and D cache in CSSR */
+    mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+
+#if defined (__GNUC__)
+    CsidReg = mfcp(XREG_CP15_CACHE_SIZE_ID);
+#elif defined (__ICCARM__)
+     mfcp(XREG_CP15_CACHE_SIZE_ID,CsidReg);
+#endif
+    /* Determine Cache Size */
+
+    CacheSize = (CsidReg >> 13U) & 0x000001FFU;
+    CacheSize += 0x00000001U;
+    CacheSize *= (u32)128;    /* to get number of bytes */
+
+    /* Number of Ways */
+    NumWays = (CsidReg & 0x000003ffU) >> 3U;
+    NumWays += 0x00000001U;
+
+    /* Get the cacheline size, way size, index size from csidr */
+    LineSize = (CsidReg & 0x00000007U) + 0x00000004U;
+
+    NumSet = CacheSize/NumWays;
+    NumSet /= (0x00000001U << LineSize);
+
+    Way = 0U;
+    Set = 0U;
+
+    /* Invalidate all the cachelines */
+    for (WayIndex = 0U; WayIndex < NumWays; WayIndex++) {
+        for (SetIndex = 0U; SetIndex < NumSet; SetIndex++) {
+            C7Reg = Way | Set;
+            /* Flush by Set/Way */
+            asm_clean_inval_dc_line_sw(C7Reg);
+
+            Set += (0x00000001U << LineSize);
+        }
+        Set = 0U;
+        Way += 0x40000000U;
+    }
+
+    /* Wait for flush to complete */
+    dsb();
+    mtcpsr(currmask);
+
+    mtcpsr(currmask);
+}
+
+void Xil_DCacheFlushLine(INTPTR adr)
+{
+    u32 currmask;
+
+    currmask = mfcpsr();
+    mtcpsr(currmask | IRQ_FIQ_MASK);
+
+    mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+
+    mtcp(XREG_CP15_CLEAN_INVAL_DC_LINE_MVA_POC, (adr & (~0x1F)));
+
+        /* Wait for flush to complete */
+    dsb();
+    mtcpsr(currmask);
+}
+
 void Xil_DCacheFlushRange(INTPTR adr, u32 len)
 {
    u32 LocalAddr = adr;
@@ -163,6 +282,130 @@ void Xil_DCacheFlushRange(INTPTR adr, u32 len)
    mtcpsr(currmask);
 }

+void Xil_DCacheStoreLine(INTPTR adr)
+{
+    u32 currmask;
+
+    currmask = mfcpsr();
+    mtcpsr(currmask | IRQ_FIQ_MASK);
+
+    mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+    mtcp(XREG_CP15_CLEAN_DC_LINE_MVA_POC, (adr & (~0x1F)));
+
+    /* Wait for store to complete */
+    dsb();
+    isb();
+
+    mtcpsr(currmask);
+}
+
+void Xil_ICacheEnable(void)
+{
+    register u32 CtrlReg;
+
+    /* enable caches only if they are disabled */
+#if defined (__GNUC__)
+    CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+#elif defined (__ICCARM__)
+    mfcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+#endif
+    if ((CtrlReg & XREG_CP15_CONTROL_I_BIT)==0x00000000U) {
+        /* invalidate the instruction cache */
+        mtcp(XREG_CP15_INVAL_IC_POU, 0);
+
+        /* enable the instruction cache */
+        CtrlReg |= (XREG_CP15_CONTROL_I_BIT);
+
+        mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+    }
+}
+
+void Xil_ICacheDisable(void)
+{
+    register u32 CtrlReg;
+
+    dsb();
+
+    /* invalidate the instruction cache */
+    mtcp(XREG_CP15_INVAL_IC_POU, 0);
+
+        /* disable the instruction cache */
+#if defined (__GNUC__)
+    CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+#elif defined (__ICCARM__)
+    mfcp(XREG_CP15_SYS_CONTROL,CtrlReg);
+#endif
+
+    CtrlReg &= ~(XREG_CP15_CONTROL_I_BIT);
+
+    mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+}
+
+void Xil_ICacheInvalidate(void)
+{
+    u32 currmask;
+
+    currmask = mfcpsr();
+    mtcpsr(currmask | IRQ_FIQ_MASK);
+
+    mtcp(XREG_CP15_CACHE_SIZE_SEL, 1);
+
+    /* invalidate the instruction cache */
+    mtcp(XREG_CP15_INVAL_IC_POU, 0);
+
+    /* Wait for invalidate to complete */
+    dsb();
+    mtcpsr(currmask);
+}
+
+void Xil_ICacheInvalidateLine(INTPTR adr)
+{
+    u32 currmask;
+
+    currmask = mfcpsr();
+    mtcpsr(currmask | IRQ_FIQ_MASK);
+
+    mtcp(XREG_CP15_CACHE_SIZE_SEL, 1);
+    mtcp(XREG_CP15_INVAL_IC_LINE_MVA_POU, (adr & (~0x1F)));
+
+        /* Wait for invalidate to complete */
+    dsb();
+    mtcpsr(currmask);
+}
+
+void Xil_ICacheInvalidateRange(INTPTR adr, u32 len)
+{
+    u32 LocalAddr = adr;
+    const u32 cacheline = 32U;
+    u32 end;
+    u32 currmask;
+
+    currmask = mfcpsr();
+    mtcpsr(currmask | IRQ_FIQ_MASK);
+    if (len != 0x00000000U) {
+        /* Back the starting address up to the start of a cache line
+         * perform cache operations until adr+len
+         */
+        end = LocalAddr + len;
+        LocalAddr = LocalAddr & ~(cacheline - 1U);
+
+        /* Select cache L0 I-cache in CSSR */
+        mtcp(XREG_CP15_CACHE_SIZE_SEL, 1U);
+
+        while (LocalAddr < end) {
+
+            /* Invalidate L1 I-cache line */
+            asm_inval_ic_line_mva_pou(LocalAddr);
+
+            LocalAddr += cacheline;
+        }
+    }
+
+    /* Wait for invalidate to complete */
+    dsb();
+    mtcpsr(currmask);
+}
+
 void rt_hw_cpu_icache_ops(int ops, void *addr, int size)
 {
    if (ops == RT_HW_CACHE_INVALIDATE)
@@ -6,6 +6,9 @@
 * Change Logs:
 * Date           Author       Notes
 * 2020-03-19 	  WangHuachen  first version
+ * 2021-05-11 	  WangHuachen  Added call to Xil_InitializeExistingMPURegConfig to
+ *                             initialize the MPU configuration table with the MPU
+ *                             configurations already set in Init_Mpu function.
 */

 .equ Mode_USR,        0x10
@@ -234,6 +237,7 @@ ctor_loop:
    b       ctor_loop
 ctor_end:

+    bl 	Xil_InitializeExistingMPURegConfig	/* Initialize MPU config */
    /* start RT-Thread Kernel       */
    ldr     pc, _entry

@@ -0,0 +1,54 @@
+/******************************************************************************
+* Copyright (c) 2015 - 2020 Xilinx, Inc.  All rights reserved.
+* SPDX-License-Identifier: MIT
+******************************************************************************/
+
+/*****************************************************************************/
+/**
+* @file xil_mmu.h
+* This file only includes xil_mpu.h which contains Xil_SetTlbAttributes API
+* defined for MPU in R5. R5 does not have mmu and for usage of similar API
+* the file has been created.
+*
+*
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.0    pkp  2/12/15 Initial version
+* </pre>
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+#ifndef XIL_MMU_H
+#define XIL_MMU_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/***************************** Include Files *********************************/
+
+#include "xil_mpu.h"
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/**************************** Type Definitions *******************************/
+
+/************************** Constant Definitions *****************************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XIL_MMU_H */
@@ -0,0 +1,129 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2017 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+* THE SOFTWARE.
+*
+*
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xil_mmu.h
+*
+* @addtogroup r5_mpu_apis Cortex R5 Processor MPU specific APIs
+*
+* MPU functions provides access to MPU operations such as enable MPU, disable
+* MPU and set attribute for section of memory.
+* Boot code invokes Init_MPU function to configure the MPU. A total of 10 MPU
+* regions are allocated with another 6 being free for users. Overview of the
+* memory attributes for different MPU regions is as given below,
+*
+*|                       | Memory Range            | Attributes of MPURegion     |
+*|-----------------------|-------------------------|-----------------------------|
+*| DDR                   | 0x00000000 - 0x7FFFFFFF | Normal write-back Cacheable |
+*| PL                    | 0x80000000 - 0xBFFFFFFF | Strongly Ordered            |
+*| QSPI                  | 0xC0000000 - 0xDFFFFFFF | Device Memory               |
+*| PCIe                  | 0xE0000000 - 0xEFFFFFFF | Device Memory               |
+*| STM_CORESIGHT         | 0xF8000000 - 0xF8FFFFFF | Device Memory               |
+*| RPU_R5_GIC            | 0xF9000000 - 0xF90FFFFF | Device memory               |
+*| FPS                   | 0xFD000000 - 0xFDFFFFFF | Device Memory               |
+*| LPS                   | 0xFE000000 - 0xFFFFFFFF | Device Memory               |
+*| OCM                   | 0xFFFC0000 - 0xFFFFFFFF | Normal write-back Cacheable |
+*
+*
+* @note
+* For a system where DDR is less than 2GB, region after DDR and before PL is
+* marked as undefined in translation table. Memory range 0xFE000000-0xFEFFFFFF is
+* allocated for upper LPS slaves, where as memory region 0xFF000000-0xFFFFFFFF is
+* allocated for lower LPS slaves.
+*
+* @{
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 6.4   asa  08/16/17 Added many APIs for MPU access to make MPU usage
+*                       user-friendly. The APIs added are: Xil_UpdateMPUConfig,
+*                       Xil_GetMPUConfig, Xil_GetNumOfFreeRegions,
+*                       Xil_GetNextMPURegion, Xil_DisableMPURegionByRegNum,
+*                       Xil_GetMPUFreeRegMask, Xil_SetMPURegionByRegNum, and
+*                       Xil_InitializeExistingMPURegConfig.
+*                       Added a new array of structure of type XMpuConfig to
+*                       represent the MPU configuration table.
+* </pre>
+*
+
+*
+*
+******************************************************************************/
+
+#ifndef XIL_MPU_H
+#define XIL_MPU_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+#include "xil_types.h"
+/***************************** Include Files *********************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+#define MPU_REG_DISABLED        0U
+#define MPU_REG_ENABLED            1U
+#define MAX_POSSIBLE_MPU_REGS    16U
+/**************************** Type Definitions *******************************/
+struct XMpuConfig{
+    u32 RegionStatus; /* Enabled or disabled */
+    INTPTR BaseAddress;/* MPU region base address */
+    u64 Size; /* MPU region size address */
+    u32 Attribute; /* MPU region size attribute */
+};
+
+typedef struct XMpuConfig XMpu_Config[MAX_POSSIBLE_MPU_REGS];
+
+extern XMpu_Config Mpu_Config;
+/************************** Constant Definitions *****************************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+void Xil_SetTlbAttributes(INTPTR Addr, u32 attrib);
+void Xil_EnableMPU(void);
+void Xil_DisableMPU(void);
+u32 Xil_SetMPURegion(INTPTR addr, u64 size, u32 attrib);
+u32 Xil_UpdateMPUConfig(u32 reg_num, INTPTR address, u32 size, u32 attrib);
+void Xil_GetMPUConfig (XMpu_Config mpuconfig);
+u32 Xil_GetNumOfFreeRegions (void);
+u32 Xil_GetNextMPURegion(void);
+u32 Xil_DisableMPURegionByRegNum (u32 reg_num);
+u16 Xil_GetMPUFreeRegMask (void);
+u32 Xil_SetMPURegionByRegNum (u32 reg_num, INTPTR addr, u64 size, u32 attrib);
+void* Xil_MemMap(UINTPTR Physaddr, size_t size, u32 flags);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XIL_MPU_H */
+/**
+* @} End of "addtogroup r5_mpu_apis".
+*/