[BSP] Add EMAC driver in lpc4088

This commit is contained in:
Bernard Xiong committed 2015-10-15 23:14:27 +08:00
1 parent 6809547491
commit 8f607deff3
13 files changed
+1382 -131

No files matched your search

@@ -221,12 +221,12 @@
#define SCS_Val 0x00000020
#define CLKSRCSEL_Val 0x00000001
#define PLL0_SETUP 1
#define PLL0CFG_Val 0x0000000a
#define PLL0CFG_Val 0x00000009
#define PLL1_SETUP 1
#define PLL1CFG_Val 0x00000023
#define CCLKSEL_Val 0x00000101
#define USBCLKSEL_Val 0x00000201
#define EMCCLKSEL_Val 0x00000001
#define EMCCLKSEL_Val 0x00000000
#define PCLKSEL_Val 0x00000002
#define SPIFICLKSEL_Val 0x00000002
#define PCONP_Val 0x042887DE
+1 -1
View File
@@ -18,6 +18,6 @@ elif rtconfig.CROSS_TOOL == 'keil':
elif rtconfig.CROSS_TOOL == 'iar':
src += ['NXP/LPC407x_8x_177x_8x/Source/Templates/IAR/startup_LPC407x_8x_177x_8x.s']
group = DefineGroup('CMSIS', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES)
group = DefineGroup('Libraries', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES)
Return('group')
+3 -2
View File
@@ -52,9 +52,10 @@ void rt_hw_board_init()
#endif
/* init systick */
SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND - 1);
/* set pend exception priority */
NVIC_SetPriority(PendSV_IRQn, (1 << __NVIC_PRIO_BITS) - 1);
/*init uart device*/
rt_hw_uart_init();
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
@@ -64,5 +65,5 @@ void rt_hw_board_init()
lpc_sdram_hw_init();
rt_kprintf("done!\n");
#endif
rt_components_board_init();
// rt_components_board_init();
}
+15 -3
View File
@@ -11,6 +11,7 @@
* Date Author Notes
* 2009-09-22 Bernard add board.h to this bsp
* 2010-02-04 Magicoe add board.h to LPC176x bsp
* 2013-12-18 Bernard porting to LPC4088 bsp
*/
#ifndef __BOARD_H__
@@ -19,10 +20,21 @@
#include "LPC407x_8x_177x_8x.h"
#include <rtthread.h>
/* SRAM allocation for Peripherals */
#define USB_RAM_BASE 0x20000000
#define MCI_RAM_BASE 0x20002000
#define ETH_RAM_BASE 0x20004000
/* use SDRAM in default */
#define LPC_EXT_SDRAM 1
/* disable SDRAM in default */
#ifndef LPC_EXT_SDRAM
#define LPC_EXT_SDRAM 0
#endif
// <RDTConfigurator URL="http://www.rt-thread.com/eclipse">
// <integer name="LPC_EXT_SDRAM" description="Enable External SDRAM memory" default="0" />
//#define LPC_EXT_SDRAM 0
// <integer name="LPC_EXT_SDRAM" description="Begin Address of External SDRAM" default="0xA0000000" />
#define LPC_EXT_SDRAM_BEGIN 0xA0000000
// <integer name="LPC_EXT_SDRAM_END" description="End Address of External SDRAM" default="0xA2000000" />
@@ -47,7 +59,7 @@ extern int Image$$RW_IRAM1$$ZI$$Limit;
extern int __bss_end;
#define HEAP_BEGIN ((void *)&__bss_end)
#endif
#define HEAP_END (0x10000000 + 0x10000)
#define HEAP_END (void*)(0x10000000 + 0x10000)
#define FINSH_DEVICE_NAME RT_CONSOLE_DEVICE_NAME
void rt_hw_board_init(void);
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
+17 -16
View File
@@ -1,7 +1,7 @@
#include <rtthread.h>
#include "board.h"
#define RT_DEVICE_CTRL_RTC_GET_COUNT 0x81 /**< get count */
#define LED_DEVICE_CTRL 0x81 /*LED control command*/
#define LED_NUM 4
struct led_ctrl
@@ -22,24 +22,24 @@ static struct lpc_led led;
static rt_err_t rt_led_init(rt_device_t dev)
{
/* led0 : P4.14,led1:P4.15 ,led2:P4.16 ,led3:P4.17*/
/* led0 : P4.27,led1:P4.15 ,led2:P4.16 ,led3:P4.17*/
/* set P4.14,P4.15,P4.16,P4.17 as GPIO. */
LPC_IOCON->P4_14 = 0x00;
LPC_IOCON->P4_27 = 0x00;
LPC_IOCON->P4_15 = 0x00;
LPC_IOCON->P4_16 = 0x00;
LPC_IOCON->P4_17 = 0x00;
/* set P4.14,P4.15,P4.16,P4.17 output. */
LPC_GPIO4->DIR |= (0x0f << 14);
/* set P4.27,P4.15,P4.16,P4.17 output. */
LPC_GPIO4->DIR |= (0x07 << 15) | (0x01 << 27);
/* turn off all the led */
LPC_GPIO4->SET = (0x0f << 14);
led.ctrl[0].num = 14;
led.ctrl[0].port = LPC_GPIO4;
led.ctrl[1].num = 15;
led.ctrl[1].port = LPC_GPIO4;
led.ctrl[2].num = 16;
led.ctrl[2].port = LPC_GPIO4;
led.ctrl[3].num = 17;
LPC_GPIO4->SET = (0x07 << 15) | (0x01 << 27);
led.ctrl[3].num = 27;
led.ctrl[3].port = LPC_GPIO4;
led.ctrl[2].num = 15;
led.ctrl[2].port = LPC_GPIO4;
led.ctrl[1].num = 16;
led.ctrl[1].port = LPC_GPIO4;
led.ctrl[0].num = 17;
led.ctrl[0].port = LPC_GPIO4;
return RT_EOK;
}
@@ -106,7 +106,7 @@ static rt_err_t rt_led_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
RT_ASSERT(dev == &led.parent);
if (cmd == RT_DEVICE_CTRL_RTC_GET_COUNT)
if (cmd == LED_DEVICE_CTRL)
{
rt_uint32_t *led_num = args;
*led_num = LED_NUM;
@@ -114,7 +114,7 @@ static rt_err_t rt_led_control(rt_device_t dev, rt_uint8_t cmd, void *args)
return RT_EOK;
}
void rt_led_hw_init(void)
int rt_led_hw_init(void)
{
led.parent.type = RT_Device_Class_Char;
led.parent.rx_indicate = RT_NULL;
@@ -131,8 +131,9 @@ void rt_led_hw_init(void)
rt_device_register(&led.parent, "led", RT_DEVICE_FLAG_RDWR);
/* init led device */
rt_led_init(&led.parent);
return 0;
}
INIT_DEVICE_EXPORT(rt_led_hw_init);
#ifdef RT_USING_FINSH
#include <finsh.h>
void led_test(rt_uint32_t led_num, rt_uint32_t value)
+153
View File
@@ -0,0 +1,153 @@
/*
* File : drv_sdram.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009-2013 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2013-05-19 Bernard The first version for LPC40xx
*/
#include "drv_sdram.h"
#include <lpc_emc.h>
#include <lpc_timer.h>
#define SDRAM_BASE_ADDR 0xA0000000
#define SDRAM_SIZE 0x2000000
/*******************************************************************************************
* @函数名:sdram_gpio_config()
* @参数 :void
* @返回值:void
* @描述 :SDRAM管脚配置函数,内部调用
*********************************************************************************************/
static void sdram_gpio_config(void)
{
LPC_IOCON->P3_0 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D0 @ P3.0 */
LPC_IOCON->P3_1 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D1 @ P3.1 */
LPC_IOCON->P3_2 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D2 @ P3.2 */
LPC_IOCON->P3_3 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D3 @ P3.3 */
LPC_IOCON->P3_4 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D4 @ P3.4 */
LPC_IOCON->P3_5 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D5 @ P3.5 */
LPC_IOCON->P3_6 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D6 @ P3.6 */
LPC_IOCON->P3_7 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D7 @ P3.7 */
LPC_IOCON->P3_8 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D8 @ P3.8 */
LPC_IOCON->P3_9 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D9 @ P3.9 */
LPC_IOCON->P3_10 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D10 @ P3.10 */
LPC_IOCON->P3_11 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D11 @ P3.11 */
LPC_IOCON->P3_12 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D12 @ P3.12 */
LPC_IOCON->P3_13 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D13 @ P3.13 */
LPC_IOCON->P3_14 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D14 @ P3.14 */
LPC_IOCON->P3_15 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* D15 @ P3.15 */
LPC_IOCON->P4_0 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A0 @ P4.0 */
LPC_IOCON->P4_1 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A1 @ P4.1 */
LPC_IOCON->P4_2 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A2 @ P4.2 */
LPC_IOCON->P4_3 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A3 @ P4.3 */
LPC_IOCON->P4_4 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A4 @ P4.4 */
LPC_IOCON->P4_5 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A5 @ P4.5 */
LPC_IOCON->P4_6 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A6 @ P4.6 */
LPC_IOCON->P4_7 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A7 @ P4.7 */
LPC_IOCON->P4_8 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A8 @ P4.8 */
LPC_IOCON->P4_9 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A9 @ P4.9 */
LPC_IOCON->P4_10 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A10 @ P4.10 */
LPC_IOCON->P4_11 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A11 @ P4.11 */
LPC_IOCON->P4_12 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A12 @ P4.12 */
LPC_IOCON->P4_13 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A13 @ P4.13 */
LPC_IOCON->P4_14 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* A14 @ P4.14 */
LPC_IOCON->P4_25 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* WEN @ P4.25 */
LPC_IOCON->P2_16 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* CASN @ P2.16 */
LPC_IOCON->P2_17 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* RASN @ P2.17 */
LPC_IOCON->P2_18 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* CLK[0] @ P2.18 */
LPC_IOCON->P2_19 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* CLK[1] @ P2.19 */
LPC_IOCON->P2_20 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* DYCSN[0] @ P2.20 */
LPC_IOCON->P2_24 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* CKE[0] @ P2.24 */
LPC_IOCON->P2_28 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* DQM[0] @ P2.28 */
LPC_IOCON->P2_29 = (1 << 0 | 0 << 3 | 0 << 5 | 1 << 9); /* DQM[1] @ P2.29 */
}
void lpc_sdram_hw_init(void)
{
volatile uint32_t i;
volatile uint32_t dwtemp;
uint16_t wtemp = wtemp;
TIM_TIMERCFG_Type TIM_ConfigStruct;
TIM_ConfigStruct.PrescaleOption = TIM_PRESCALE_USVAL;
TIM_ConfigStruct.PrescaleValue = 1;
// Set configuration for Tim_config and Tim_MatchConfig
TIM_Init(LPC_TIM0, TIM_TIMER_MODE, &TIM_ConfigStruct);
LPC_SC->PCONP |= 0x00000800;
LPC_SC->EMCDLYCTL = 0x00001010;
LPC_EMC->Control = 0x00000001;
LPC_EMC->Config = 0x00000000;
sdram_gpio_config();
//LPC_SC->EMCCLKSEL = 1; //跑主频的一般频率,60Mhz
LPC_EMC->DynamicRP = EMC_NS2CLK(20); /* 20ns, */
LPC_EMC->DynamicRAS = /*EMC_NS2CLK(42, nsPerClk);*/ 15; /* 42ns to 100K ns, */
LPC_EMC->DynamicSREX = 1 - 1; /* tSRE, 1clk, */
LPC_EMC->DynamicAPR = 2 - 1; /* Not found!!! Estimated as 2clk, */
LPC_EMC->DynamicDAL = EMC_NS2CLK(20) + 2; /* tDAL = tRP + tDPL = 20ns + 2clk */
LPC_EMC->DynamicWR = 2 - 1; /* 2CLK, */
LPC_EMC->DynamicRC = EMC_NS2CLK(63); /* H57V2562GTR-75C tRC=63ns(min)*/
LPC_EMC->DynamicRFC = EMC_NS2CLK(63); /* H57V2562GTR-75C tRFC=tRC */
LPC_EMC->DynamicXSR = 0x0000000F; /* exit self-refresh to active, 不知道,设为最久 */
LPC_EMC->DynamicRRD = EMC_NS2CLK(63); /* 3clk, tRRD=15ns(min) */
LPC_EMC->DynamicMRD = 2 - 1; /* 2clk, tMRD=2clk(min) */
LPC_EMC->DynamicReadConfig = 0x00000001; /* Command delayed strategy, using EMCCLKDELAY */
/* H57V2562GTR-75C: tCL=3CLK, tRCD=20ns(min), 3 CLK=24ns */
LPC_EMC->DynamicRasCas0 = 0x303;
/* For Manley lpc1778 SDRAM: H57V2562GTR-75C, 256Mb, 16Mx16, 4 banks, row=13, column=9 */
#ifdef SDRAM_CONFIG_16BIT
LPC_EMC->DynamicConfig0 = 0x680; /* 256Mb, 16Mx16, 4 banks, row=13, column=9, RBC */
#elif defined SDRAM_CONFIG_32BIT
LPC_EMC->DynamicConfig0 = 0x4680; /* 256Mb, 16Mx16, 4 banks, row=13, column=9, RBC */
#endif
TIM_Waitms(100);
LPC_EMC->DynamicControl = 0x00000183; /* Issue NOP command */
TIM_Waitms(200); /* wait 200ms */
LPC_EMC->DynamicControl = 0x00000103; /* Issue PALL command */
LPC_EMC->DynamicRefresh = 0x00000002; /* ( n * 16 ) -> 32 clock cycles */
for (i = 0; i < 0x80; i++); /* wait 128 AHB clock cycles */
LPC_EMC->DynamicRefresh = EMC_SDRAM_REFRESH(64);
LPC_EMC->DynamicControl = 0x00000083; /* Issue MODE command */
#ifdef SDRAM_CONFIG_16BIT
wtemp = *((volatile uint16_t *)(SDRAM_BASE | (0x33 << 12))); /* 8 burst, 3 CAS latency */
#elif defined SDRAM_CONFIG_32BIT
dwtemp = *((volatile uint32_t *)(SDRAM_BASE | (0x32 << 13))); /* 4 burst, 3 CAS latency */
#endif
LPC_EMC->DynamicControl = 0x00000000; /* Issue NORMAL command */
LPC_EMC->DynamicConfig0 |= 0x80000; /* enable buffer */
TIM_Waitms(1);
TIM_DeInit(LPC_TIM0);
}
+35
View File
@@ -0,0 +1,35 @@
/*
* File : drv_sdram.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009-2013 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2013-05-19 Bernard The first version for LPC40xx
*/
#ifndef __DRV_SDRAM_H__
#define __DRV_SDRAM_H__
#include <board.h>
#define SDRAM_CONFIG_16BIT //use the 16 bitSDRAM
//#define SDRAM_CONFIG_32BIT //use the 32 bitSDRAM
#ifdef SDRAM_CONFIG_16BIT
#define SDRAM_SIZE 0x2000000 // 256Mbit
#elif defined SDRAM_CONFIG_32BIT //
#define SDRAM_SIZE 0x4000000 // 512Mbit
#else
error Wrong SDRAM config, check ex_sdram.h
#endif
#define SDRAM_BASE 0xA0000000 /* CS0 */
void lpc_sdram_hw_init(void);
#endif
File diff suppressed because it is too large. Load diff
+14
View File
@@ -1,3 +1,17 @@
/*
* File : drv_uart.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009-2014 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2014-01-05 NongXiaoming The first version for LPC40xx
*/
#ifndef __UART_H__
#define __UART_H__
+1 -1
View File
@@ -165,7 +165,7 @@
// <bool name="RT_LWIP_SNMP" description="Enable SNMP protocol" default="false" />
// #define RT_LWIP_SNMP
// <bool name="RT_LWIP_DHCP" description="Enable DHCP client to get IP address" default="false" />
// #define RT_LWIP_DHCP
#define RT_LWIP_DHCP
// <integer name="RT_LWIP_TCPTHREAD_PRIORITY" description="the thread priority of TCP thread" default="128" />
#define RT_LWIP_TCPTHREAD_PRIORITY 12
// <integer name="RT_LWIP_TCPTHREAD_MBOX_SIZE" description="the mail box size of TCP thread to wait for" default="32" />
+164
View File
@@ -0,0 +1,164 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
<SchemaVersion>1.0</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Extensions>
<cExt>*.c</cExt>
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
</Extensions>
<DaveTm>
<dwLowDateTime>0</dwLowDateTime>
<dwHighDateTime>0</dwHighDateTime>
</DaveTm>
<Target>
<TargetName>RT-Thread LPC408x</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<CLKADS>12000000</CLKADS>
<OPTTT>
<gFlags>1</gFlags>
<BeepAtEnd>1</BeepAtEnd>
<RunSim>1</RunSim>
<RunTarget>0</RunTarget>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
<FlashByte>65535</FlashByte>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
</OPTHX>
<OPTLEX>
<PageWidth>79</PageWidth>
<PageLength>66</PageLength>
<TabStop>8</TabStop>
<ListingPath>.\build\</ListingPath>
</OPTLEX>
<ListingPage>
<CreateCListing>1</CreateCListing>
<CreateAListing>1</CreateAListing>
<CreateLListing>1</CreateLListing>
<CreateIListing>0</CreateIListing>
<AsmCond>1</AsmCond>
<AsmSymb>1</AsmSymb>
<AsmXref>0</AsmXref>
<CCond>1</CCond>
<CCode>0</CCode>
<CListInc>0</CListInc>
<CSymb>0</CSymb>
<LinkerCodeListing>0</LinkerCodeListing>
</ListingPage>
<OPTXL>
<LMap>1</LMap>
<LComments>1</LComments>
<LGenerateSymbols>1</LGenerateSymbols>
<LLibSym>1</LLibSym>
<LLines>1</LLines>
<LLocSym>1</LLocSym>
<LPubSym>1</LPubSym>
<LXref>0</LXref>
<LExpSel>0</LExpSel>
</OPTXL>
<OPTFL>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>1</IsCurrentTarget>
</OPTFL>
<CpuCode>0</CpuCode>
<DllOpt>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments>-MPU</SimDllArguments>
<SimDlgDllName>DCM.DLL</SimDlgDllName>
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments>-MPU</TargetDllArguments>
<TargetDlgDllName>TCM.DLL</TargetDlgDllName>
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
</DllOpt>
<DebugOpt>
<uSim>0</uSim>
<uTrg>1</uTrg>
<sLdApp>1</sLdApp>
<sGomain>1</sGomain>
<sRbreak>1</sRbreak>
<sRwatch>1</sRwatch>
<sRmem>1</sRmem>
<sRfunc>1</sRfunc>
<sRbox>1</sRbox>
<tLdApp>1</tLdApp>
<tGomain>0</tGomain>
<tRbreak>1</tRbreak>
<tRwatch>1</tRwatch>
<tRmem>1</tRmem>
<tRfunc>0</tRfunc>
<tRbox>1</tRbox>
<tRtrace>0</tRtrace>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<nTsel>7</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
<sDlgPa></sDlgPa>
<sIfile></sIfile>
<tDll></tDll>
<tDllPa></tDllPa>
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>JL2CM3</Key>
<Name>-U4294967295 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO11 -FD10000000 -FC800 -FN1 -FF0LPC_IAP_512 -FS00 -FL080000</Name>
</SetRegEntry>
</TargetDriverDllRegistry>
<Breakpoint/>
<Tracepoint>
<THDelay>0</THDelay>
</Tracepoint>
<DebugFlag>
<trace>0</trace>
<periodic>0</periodic>
<aLwin>0</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
<aPa>0</aPa>
<viewmode>0</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>0</aTbox>
<AscS1>0</AscS1>
<AscS2>0</AscS2>
<AscS3>0</AscS3>
<aSer3>0</aSer3>
<eProf>0</eProf>
<aLa>0</aLa>
<aPa1>0</aPa1>
<AscS4>0</AscS4>
<aSer4>0</aSer4>
<StkLoc>0</StkLoc>
<TrcWin>0</TrcWin>
<newCpu>0</newCpu>
<uProt>0</uProt>
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
</TargetOption>
</Target>
</ProjectOpt>