add the driver of gpio

bsp/maxim/MAX32660_EVSYS/applications/application.c

@@ -11,22 +11,13 @@
 
 #include <rtthread.h>
 #include <rtdevice.h>
-#include "gpio.h"
-
-const gpio_cfg_t led_pin[] =
-{
-    {PORT_0, PIN_13, GPIO_FUNC_OUT, GPIO_PAD_NONE},
-};
 
 int main(void)
 {
     int count = 1;
-    GPIO_Config(&led_pin[0]);
-    GPIO_OutSet(&led_pin[0]);
     while (count++)
     {
         rt_thread_mdelay(500);
-        GPIO_OutToggle(&led_pin[0]);
     }
     return RT_EOK;
 }

bsp/maxim/MAX32660_EVSYS/board/board.h

@@ -14,6 +14,10 @@
 #include <rtthread.h>
 #include <rthw.h>
 
+#include "mxc_config.h"
+#include "mxc_assert.h"
+
+
 #define MCU_FLASH_START_ADRESS       ((uint32_t)0x0)
 #define MCU_FLASH_SIZE_KB               (256)
 #define MCU_FLASH_END_ADDRESS        ((uint32_t)(MCU_FLASH_START_ADRESS + MCU_FLASH_SIZE*1024))

bsp/maxim/libraries/HAL_Drivers/drv_gpio.h

@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-02-11     supperthomas first version
+ *
+ */
+
+#ifndef __DRV_GPIO_H__
+#define __DRV_GPIO_H__
+
+#include <board.h>
+#include <rtdevice.h>
+
+int rt_hw_pin_init(void);
+
+#endif /* __DRV_GPIO_H__ */
+

bsp/maxim/libraries/HAL_Drivers/drv_spi.c

@@ -166,64 +166,4 @@ rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name,
 #endif /* BSP_USING_SPI0 || BSP_USING_SPI1 || BSP_USING_SPI2 */
 #endif /*BSP_USING_SPI*/
 
-#define SPI_DEVICE_BUS      "spi0"
-#define SPI_DEVICE_NAME     "spi01"
 
-#define TEST_LEN        10
-uint8_t rx_data[TEST_LEN];
-uint8_t tx_data[TEST_LEN];
-
-static void spi_sample(int argc, char *argv[])
-{
-    struct rt_spi_device *spi_dev;
-    char name[RT_NAME_MAX];
-
-
-    spi_dev = (struct rt_spi_device *)rt_device_find(SPI_DEVICE_NAME);
-    if (RT_NULL == spi_dev)
-    {
-        rt_hw_spi_device_attach(SPI_DEVICE_BUS, SPI_DEVICE_NAME, PIN_0);
-        spi_dev = (struct rt_spi_device *)rt_device_find(SPI_DEVICE_NAME);
-    }
-
-    struct rt_spi_configuration spi_cfg =
-    {
-        .mode = 0,
-        .data_width = 8,
-        .max_hz = 1000000,
-    };
-    rt_spi_configure(spi_dev, &spi_cfg);
-
-    rt_kprintf("\n************** SPI Loopback Demo ****************\n");
-    rt_kprintf("This example configures the SPI to send data between the MISO (P0.4) and\n");
-    rt_kprintf("MOSI (P0.5) pins.  Connect these two pins together. \n");
-
-    for (int j = 0; j < TEST_LEN; j++)
-    {
-        tx_data[j] = j ;
-    }
-    if (argc == 2)
-    {
-        rt_strncpy(name, argv[1], RT_NAME_MAX);
-    }
-    else
-    {
-        rt_strncpy(name, SPI_DEVICE_NAME, RT_NAME_MAX);
-    }
-
-    /* ?? spi ???????? */
-    spi_dev = (struct rt_spi_device *)rt_device_find(name);
-    if (!spi_dev)
-    {
-        rt_kprintf("spi sample run failed! can't find %s device!\n", name);
-    }
-    else
-    {
-        rt_spi_transfer(spi_dev, tx_data, rx_data, TEST_LEN);
-        for (int i = 0; i < TEST_LEN; i++)
-        {
-            rt_kprintf(" 0x%02x, ", rx_data[i]);
-        }
-    }
-}
-MSH_CMD_EXPORT(spi_sample, spi sample);