Merge pull request #2464 from misonyo/change

[bsp/old stm32 bsp]remove old stm32 bsp
2026-11-09 20:45:41 +08:00 · 2019-03-18 20:17:29 +08:00
commit 8804a77655
@@ -29,16 +29,16 @@ env:
 #  - RTT_BSP='avr32uc3b0' RTT_TOOL_CHAIN='atmel-avr32'
 #  - RTT_BSP='bf533' # no scons
  - RTT_BSP='efm32' RTT_TOOL_CHAIN='sourcery-arm' 
-#  - RTT_BSP='gd32450z-eval' RTT_TOOL_CHAIN='sourcery-arm' 
+#  - RTT_BSP='gd32450z-eval' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='gkipc' RTT_TOOL_CHAIN='sourcery-arm'
-  - RTT_BSP='lm3s8962' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='lm3s9b9x' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='lm4f232' RTT_TOOL_CHAIN='sourcery-arm' 
+  - RTT_BSP='lm3s8962' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='lm3s9b9x' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='lm4f232' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='tm4c129x' RTT_TOOL_CHAIN='sourcery-arm'
-  - RTT_BSP='lpc176x' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='lpc178x' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='lpc2148' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='lpc2478' RTT_TOOL_CHAIN='sourcery-arm' 
+  - RTT_BSP='lpc176x' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='lpc178x' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='lpc2148' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='lpc2478' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='xplorer4330/M4' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='lpc43xx/M4' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='lpc408x' RTT_TOOL_CHAIN='sourcery-arm'
@@ -46,14 +46,14 @@ env:
 #  - RTT_BSP='lpc54608-LPCXpresso' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='ls1bdev' RTT_TOOL_CHAIN='sourcery-mips'
  - RTT_BSP='ls1cdev' RTT_TOOL_CHAIN='sourcery-mips'
-  - RTT_BSP='imx6sx/cortex-a9' RTT_TOOL_CHAIN='sourcery-arm' 
+  - RTT_BSP='imx6sx/cortex-a9' RTT_TOOL_CHAIN='sourcery-arm'
 #  - RTT_BSP='m16c62p' # m32c
-  - RTT_BSP='mb9bf500r' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='mb9bf506r' RTT_TOOL_CHAIN='sourcery-arm' 
+  - RTT_BSP='mb9bf500r' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='mb9bf506r' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='mb9bf618s' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='mb9bf568r' RTT_TOOL_CHAIN='sourcery-arm'
 #  - RTT_BSP='microblaze' # no scons
-  - RTT_BSP='mini2440' RTT_TOOL_CHAIN='sourcery-arm' 
+  - RTT_BSP='mini2440' RTT_TOOL_CHAIN='sourcery-arm'
 #  - RTT_BSP='mini4020' # no scons
 #  - RTT_BSP='nios_ii' # no scons
  - RTT_BSP='nuvoton_nuc472' RTT_TOOL_CHAIN='sourcery-arm'
@@ -63,25 +63,21 @@ env:
  - RTT_BSP='qemu-vexpress-gemini' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='sam7x' RTT_TOOL_CHAIN='sourcery-arm'
 #  - RTT_BSP='simulator' # x86
-  - RTT_BSP='stm32f0x' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32l072' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f107' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f10x' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f10x-HAL' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f20x' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f40x' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f4xx-HAL' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f429-apollo' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32f429-disco' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32l475-iot-disco' RTT_TOOL_CHAIN='sourcery-arm' 
-  - RTT_BSP='stm32l476-nucleo' RTT_TOOL_CHAIN='sourcery-arm' 
+  - RTT_BSP='stm32f10x' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32f10x-HAL' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32f20x' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32f4xx-HAL' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32f429-apollo' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32f429-disco' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32h743-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f091-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f103-atk-nano' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32/stm32f103-atk-warshipv3' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f103-dofly-lyc8' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f103-fire-arbitrary' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f103-hw100k-ibox' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f107-uc-eval' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32/stm32f405-smdz-breadfruit' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f407-atk-explorer' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f407-st-discovery' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32f411-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
@@ -98,6 +94,7 @@ env:
  - RTT_BSP='stm32/stm32l432-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32l475-atk-pandora' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='stm32/stm32l476-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32/stm32l496-ali-developer' RTT_TOOL_CHAIN='sourcery-arm'
  - RTT_BSP='swm320-lq100' RTT_TOOL_CHAIN='sourcery-arm'
 #  - RTT_BSP='taihu' RTT_TOOL_CHAIN='sourcery-ppc'
 #  - RTT_BSP='upd70f3454' # iar
@@ -1,35 +0,0 @@
-/* ---------------------------------------------------------------------- 
-* Copyright (C) 2010 ARM Limited. All rights reserved. 
-* 
-* $Date:        11. November 2010  
-* $Revision: 	V1.0.2  
-* 
-* Project: 	    CMSIS DSP Library 
-* Title:	    arm_common_tables.h 
-* 
-* Description:	This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions 
-* 
-* Target Processor: Cortex-M4/Cortex-M3
-*  
-* Version 1.0.2 2010/11/11 
-*    Documentation updated.  
-* 
-* Version 1.0.1 2010/10/05  
-*    Production release and review comments incorporated. 
-* 
-* Version 1.0.0 2010/09/20  
-*    Production release and review comments incorporated. 
-* -------------------------------------------------------------------- */ 
- 
-#ifndef _ARM_COMMON_TABLES_H 
-#define _ARM_COMMON_TABLES_H 
- 
-#include "arm_math.h" 
- 
-extern uint16_t armBitRevTable[256]; 
-extern q15_t armRecipTableQ15[64]; 
-extern q31_t armRecipTableQ31[64]; 
-extern const q31_t realCoefAQ31[1024];
-extern const q31_t realCoefBQ31[1024];
- 
-#endif /*  ARM_COMMON_TABLES_H */ 
@@ -1,34 +0,0 @@
-* -------------------------------------------------------------------
-* Copyright (C) 2011 ARM Limited. All rights reserved.  
-* 
-* Date:        25 July 2011  
-* Revision:    V2.10 
-*  
-* Project:     Cortex Microcontroller Software Interface Standard (CMSIS)
-* Title:       Release Note for CMSIS
-*
-* -------------------------------------------------------------------
-
-
-NOTE - Open the index.html file to access CMSIS documentation
-
-
-The Cortex Microcontroller Software Interface Standard (CMSIS) provides a single standard across all 
-Cortex-Mx processor series vendors. It enables code re-use and code sharing across software projects 
-and reduces time-to-market for new embedded applications.
-
-CMSIS is released under the terms of the end user license agreement ("CMSIS END USER LICENCE AGREEMENT.pdf").
-Any user of the software package is bound to the terms and conditions of the end user license agreement.
-
-
-You will find the following sub-directories:
-
-Documentation           - Contains CMSIS documentation.
- 
-DSP_Lib                 - MDK project files, Examples and source files etc.. to build the 
-                          CMSIS DSP Software Library for Cortex-M0, Cortex-M3, Cortex-M4 processors.
-
-Include                 - CMSIS Core Support and CMSIS DSP Include Files.
-
-Lib                     - CMSIS DSP Binaries 
---
@@ -1,104 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32f0xx.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   CMSIS Cortex-M0 Device Peripheral Access Layer System Header File.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f0xx_system
-  * @{
-  */  
-  
-/**
-  * @brief Define to prevent recursive inclusion
-  */
-#ifndef __SYSTEM_STM32F0XX_H
-#define __SYSTEM_STM32F0XX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/** @addtogroup STM32F0xx_System_Includes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup STM32F0xx_System_Exported_types
-  * @{
-  */
-
-extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F0xx_System_Exported_Constants
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F0xx_System_Exported_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F0xx_System_Exported_Functions
-  * @{
-  */
-  
-extern void SystemInit(void);
-extern void SystemCoreClockUpdate(void);
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__SYSTEM_STM32F0XX_H */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */  
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,144 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head>
-
-
-
-
-
-
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<link rel="File-List" href="Library_files/filelist.xml">
-<link rel="Edit-Time-Data" href="Library_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><title>Release Notes for STM32F0xx CMSIS</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>STMicroelectronics</o:LastAuthor> <o:Revision>37</o:Revision> <o:TotalTime>136</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-03-01T17:56:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>522</o:Words> <o:Characters>2977</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>24</o:Lines> <o:Paragraphs>6</o:Paragraphs> <o:CharactersWithSpaces>3493</o:CharactersWithSpaces> <o:Version>11.6568</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]-->
-
-
-
-<style>
-<!--
-/* Style Definitions */
-p.MsoNormal, li.MsoNormal, div.MsoNormal
-{mso-style-parent:"";
-margin:0in;
-margin-bottom:.0001pt;
-mso-pagination:widow-orphan;
-font-size:12.0pt;
-font-family:"Times New Roman";
-mso-fareast-font-family:"Times New Roman";}
-h2
-{mso-style-next:Normal;
-margin-top:12.0pt;
-margin-right:0in;
-margin-bottom:3.0pt;
-margin-left:0in;
-mso-pagination:widow-orphan;
-page-break-after:avoid;
-mso-outline-level:2;
-font-size:14.0pt;
-font-family:Arial;
-font-weight:bold;
-font-style:italic;}
-a:link, span.MsoHyperlink
-{color:blue;
-text-decoration:underline;
-text-underline:single;}
-a:visited, span.MsoHyperlinkFollowed
-{color:blue;
-text-decoration:underline;
-text-underline:single;}
-p
-{mso-margin-top-alt:auto;
-margin-right:0in;
-mso-margin-bottom-alt:auto;
-margin-left:0in;
-mso-pagination:widow-orphan;
-font-size:12.0pt;
-font-family:"Times New Roman";
-mso-fareast-font-family:"Times New Roman";}
-@page Section1
-{size:8.5in 11.0in;
-margin:1.0in 1.25in 1.0in 1.25in;
-mso-header-margin:.5in;
-mso-footer-margin:.5in;
-mso-paper-source:0;}
-div.Section1
-{page:Section1;}
-->
-</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="5122"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--><meta content="MCD Application Team" name="author"></head>
-<body link="blue" vlink="blue">
-<div class="Section1">
-<p class="MsoNormal"><span style="font-family: Arial;"><o:p><br>
-</o:p></span></p>
-<div align="center">
-<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
-<tbody>
-<tr style="">
-<td style="padding: 0cm;" valign="top">
-<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
-<tbody>
-          <tr>
-            <td style="vertical-align: top;"><span style="font-size: 8pt; font-family: Arial; color: blue;"><a href="../../../../Release_Notes.html">Back to Release page</a></span></td>
-          </tr>
-<tr style="">
-<td style="padding: 1.5pt;">
-<h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">Release
-Notes for STM32F0xx CMSIS</span><span style="font-size: 20pt; font-family: Verdana;"><o:p></o:p></span></h1>
-<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;">Copyright 2012 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p>
-<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;"><img alt="" id="_x0000_i1025" src="../../../../_htmresc/logo.bmp" style="border: 0px solid ; width: 86px; height: 65px;"></span><span style="font-size: 10pt;"><o:p></o:p></span></p>
-</td>
-</tr>
-</tbody>
-</table>
-<p class="MsoNormal"><span style="font-family: Arial; display: none;"><o:p>&nbsp;</o:p></span></p>
-<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900">
-<tbody>
-<tr>
-<td style="padding: 0cm;" valign="top">
-<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><span style="font-size: 12pt; color: white;">Contents<o:p></o:p></span></h2>
-<ol style="margin-top: 0cm;" start="1" type="1">
-<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#History">STM32F0xx&nbsp;CMSIS
-update History</a><o:p></o:p></span></li>
-<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#License">License</a><o:p></o:p></span></li>
-</ol>
-<span style="font-family: &quot;Times New Roman&quot;;"></span>
-<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">STM32F0xx CMSIS
-update History</span></h2><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.0 / 23-March-2012</span></h3><p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<o:p></o:p></span></u></b></p>
-<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">First official release&nbsp;for <span style="font-weight: bold; font-style: italic;">STM32F0xx devices</span></span><span style="font-size: 10pt; font-family: Verdana;"></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">All source files: license disclaimer text update and add link to the License file on ST Internet</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32f0xx.h</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">change MCO bits value:</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">change <span style="font-style: italic;">RCC_CFGR_MCO_HSI14</span> value from 0x03000000 to 0x01000000</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add <span style="font-style: italic;">RCC_CFGR_MCO_LSI</span> having value 0x02000000</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add <span style="font-style: italic;">RCC_CFGR_MCO_LSE</span> having value 0x03000000</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new bit <span style="font-style: italic;">RCC_CSR_V18PWRRSTF</span> having value 0x00800000</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">TIM_OR</span> bits definition values corrected</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Rename <span style="font-style: italic;">ADC_ISR_EOS</span> to <span style="font-style: italic;">ADC_ISR_EOSEQ</span></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Rename <span style="font-style: italic;">ADC_IER_EOSIE</span> to <span style="font-style: italic;">ADC_IER_EOSEQIE</span></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Rename <span style="font-style: italic;">ADC_CFGR1_AUTDLY</span> to <span style="font-style: italic;">ADC_CFGR1_WAIT</span></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Rename option bit <span style="font-style: italic;">FLASH_OBR_BOOT1</span> to <span style="font-style: italic;">FLASH_OBR_nBOOT1</span></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Rename <span style="font-style: italic;">FLASH_OBR_VDDA_ANALOG</span> to <span style="font-style: italic;">FLASH_OBR_VDDA_MONITOR</span></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add Flash and OB keys (removed from Flash driver)</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">system_stm32f0xx.c</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><spanLine truncated
-            <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.0RC1 / 27-January-2012<o:p></o:p></span></h3>
-            <p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
-Changes<o:p></o:p></span></u></b></p>
-
-            <ul style="margin-top: 0cm;" type="square">
-<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Official version (V1.0.0) Release Candidate 1</span><span style="font-size: 10pt; font-family: Verdana;"></span></li>
-              <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">All source 
-files: update disclaimer to add reference to the&nbsp;new license agreement</span></li>
-              <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Update all peripherals bits definitions<br>
-</span></li>
-            </ul><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold;"></span><span style="font-weight: bold; font-style: italic;"></span></span>
-
-<ul style="margin-top: 0in;" type="disc">
-</ul>
-<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2><p class="MsoNormal"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;">Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this&nbsp;</span><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;">package</span><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"> except in compliance with the License. You may obtain a copy of the License at:<br><br></span></p><div style="text-align: center;"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <a target="_blank" href="http://www.st.com/software_license_agreement_liberty_v2">http://www.st.com/software_license_agreement_liberty_v2</a></span><br><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"></span></div><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"><br>Unless
-required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS, <br>WITHOUT
-WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See
-the License for the specific language governing permissions and
-limitations under the License.</span>
-
-<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;">
-<hr align="center" size="2" width="100%"></span></div>
-<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt; text-align: center;" align="center"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;">For
-    complete documentation on </span><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">STM32<span style="color: black;">
-    Microcontrollers visit </span><u><span style="color: blue;"><a href="http://www.st.com/internet/mcu/family/141.jsp" target="_blank">www.st.com/STM32</a></span></u></span><span style="font-size: 10pt; font-family: Verdana;"><u><span style="color: blue;"><a href="http://www.st.com/internet/mcu/family/141.jsp" target="_blank"></a></span></u></span><span style="color: black;"><o:p></o:p></span></p>
-</td>
-</tr>
-</tbody>
-</table>
-<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p>
-</td>
-</tr>
-</tbody>
-</table>
-</div>
-<p class="MsoNormal"><o:p>&nbsp;</o:p></p>
-</div>
-</body></html>
@@ -1,115 +0,0 @@
-<html>
-
-<head>
-<title>CMSIS Release Notes</title>
-<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
-<meta name="GENERATOR" content="Microsoft FrontPage 12.0">
-<meta name="ProgId" content="FrontPage.Editor.Document">
-<style>
-<!--
-/*-----------------------------------------------------------
-Keil Software CHM Style Sheet
-----------------------------------------------------------*/
-body         { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family: 
-               Verdana, Arial, 'Sans Serif' }
-a:link       { color: #0000FF; text-decoration: underline }
-a:visited    { color: #0000FF; text-decoration: underline }
-a:active     { color: #FF0000; text-decoration: underline }
-a:hover      { color: #FF0000; text-decoration: underline }
-h1           { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold; 
-               text-align: Center; margin-right: 3 }
-h2           { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold; 
-               background-color: #CCCCCC; margin-top: 24; margin-bottom: 3; 
-               padding: 6 }
-h3           { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color: 
-               #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
-pre          { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC; 
-               margin-left: 24; margin-right: 24 }
-ul           { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
-ol           { margin-top: 6pt; margin-bottom: 0 }
-li           { clear: both; margin-bottom: 6pt }
-table        { font-size: 100%; border-width: 0; padding: 0 }
-th           { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align: 
-               bottom; padding-right: 6pt }
-tr           { text-align: left; vertical-align: top }
-td           { text-align: left; vertical-align: top; padding-right: 6pt }
-.ToolT       { font-size: 8pt; color: #808080 }
-.TinyT       { font-size: 8pt; text-align: Center }
-code         { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier; 
-               line-height: 120%; font-style: normal }
-/*-----------------------------------------------------------
-Notes
-----------------------------------------------------------*/
-p.note       { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
-/*-----------------------------------------------------------
-Expanding/Contracting Divisions
-----------------------------------------------------------*/
-#expand      { text-decoration: none; margin-bottom: 3pt }
-img.expand   { border-style: none; border-width: medium }
-div.expand   { display: none; margin-left: 9pt; margin-top: 0 }
-/*-----------------------------------------------------------
-Where List Tags
-----------------------------------------------------------*/
-p.wh         { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
-table.wh     { width: 100% }
-td.whItem    { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom: 
-               6pt }
-td.whDesc    { padding-bottom: 6pt }
-/*-----------------------------------------------------------
-Keil Table Tags
-----------------------------------------------------------*/
-table.kt     { border: 1pt solid #000000 }
-th.kt        { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt; 
-               padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
-tr.kt        {  }
-td.kt        { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0; 
-               padding-left: 6pt; padding-right: 6pt; padding-top: 2pt; 
-               padding-bottom: 2pt }
-/*-----------------------------------------------------------
-----------------------------------------------------------*/
-->
-
-</style>
-</head>
-
-<body>
-
-<h1>CMSIS Release Notes</h1>
-<p align="center">Release Notes for CMSIS V2.00</p>
-<p align="center">November 2010</p>
-
-<p class="TinyT">Information in this file, the accompany manuals, and software is<br>
-                 Copyright © ARM Ltd.<br>All rights reserved.
-<p align="center"><img src="Documentation/CMSIS_Logo_Final.jpg" height="78" width="197">
-</p>
-
-<hr>
-
-<h2>Contents</h2>
-
-<ul>
-  <li class="LI2"><a href="Documentation/CMSIS_History.htm">CMSIS Version History</a>
-    lists the changes between the different CMSIS versions.
-  </li>
-  <li class="LI2"><a href="Documentation/CMSIS_Core.htm">CMSIS Core Support</a>
-    contains a general description for CMSIS.
-  </li>
-  <li class="LI2"><a href="Documentation/DSP_Lib/html/index.html">CMSIS DSP Software Library</a>
-    describes the CMSIS DSP software library.
-  </li>
-  <li class="LI2"><a href="Documentation/CMSIS_System_View_Description.htm">CMSIS System View Description</a>
-    describes the CMSIS System View Description.
-  </li>
-  <li class="LI2"><a href="Documentation/CMSIS_CM4_SIMD.htm">CMSIS Support for Cortex-M4 SIMD Instructions</a>
-    lists the Cortex-M4 instructions supported by CMSIS.
-  </li>
-  <li class="LI2"><a href="Documentation/CMSIS_DebugSupport.htm">CMSIS Debug Support</a>
-    describes the available CMSIS Debug functions and the used methods.
-  </li>
-  <li class="LI2"><a href="CMSIS END USER LICENCE AGREEMENT.pdf">License</a></li>
-</ul>
-
-
-</body>
-
-</html>
@@ -1,31 +0,0 @@
-import rtconfig
-Import('RTT_ROOT')
-from building import *
-
-# get current directory
-cwd = GetCurrentDir()
-
-# The set of source files associated with this SConscript file.
-src = Split("""
-CMSIS/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c
-""")
-
-src += Glob('STM32F0xx_StdPeriph_Driver/src/*.c')
-
-#add for startup script 
-if rtconfig.CROSS_TOOL == 'gcc':
-     src = src + ['CMSIS/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f0xx.s']
-elif rtconfig.CROSS_TOOL == 'keil':
-     src = src + ['CMSIS/ST/STM32F0xx/Source/Templates/arm/startup_stm32f0xx.s']
-elif rtconfig.CROSS_TOOL == 'iar':
-     src = src + ['CMSIS/ST/STM32F0xx/Source/Templates/iar/startup_stm32f0xx.s']
-
-path = [cwd + '/STM32F0xx_StdPeriph_Driver/inc', 
-    cwd + '/CMSIS/ST/STM32F0xx/Include',
-    cwd + '/CMSIS/Include']
-
-#CPPDEFINES = ['USE_STDPERIPH_DRIVER', rtconfig.STM32_TYPE]
-CPPDEFINES = ['USE_STDPERIPH_DRIVER']
-group = DefineGroup('STM32_StdPeriph', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
-
-Return('group')
@@ -1,100 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_crc.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file contains all the functions prototypes for the CRC firmware 
-  *          library.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_CRC_H
-#define __STM32F0XX_CRC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/*!< Includes ----------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup CRC
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup CRC_Exported_Constants
-  * @{
-  */
-#define CRC_ReverseInputData_No             ((uint32_t)0x00000000) /*!< No reverse operation of Input Data */
-#define CRC_ReverseInputData_8bits          CRC_CR_REV_IN_0        /*!< Reverse operation of Input Data on 8 bits */
-#define CRC_ReverseInputData_16bits         CRC_CR_REV_IN_1        /*!< Reverse operation of Input Data on 16 bits */
-#define CRC_ReverseInputData_32bits         CRC_CR_REV_IN          /*!< Reverse operation of Input Data on 32 bits */
-
-#define IS_CRC_REVERSE_INPUT_DATA(DATA) (((DATA) == CRC_ReverseInputData_No)     || \
-                                         ((DATA) == CRC_ReverseInputData_8bits)  || \
-                                         ((DATA) == CRC_ReverseInputData_16bits) || \
-                                         ((DATA) == CRC_ReverseInputData_32bits))
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-/* Configuration of the CRC computation unit **********************************/
-void CRC_DeInit(void);
-void CRC_ResetDR(void);
-void CRC_ReverseInputDataSelect(uint32_t CRC_ReverseInputData);
-void CRC_ReverseOutputDataCmd(FunctionalState NewState);
-void CRC_SetInitRegister(uint32_t CRC_InitValue);
-
-/* CRC computation ************************************************************/
-uint32_t CRC_CalcCRC(uint32_t CRC_Data);
-uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
-uint32_t CRC_GetCRC(void);
-
-/* Independent register (IDR) access (write/read) *****************************/
-void CRC_SetIDRegister(uint8_t CRC_IDValue);
-uint8_t CRC_GetIDRegister(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_CRC_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,105 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_dbgmcu.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file contains all the functions prototypes for the DBGMCU firmware 
-  *          library.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_DBGMCU_H
-#define __STM32F0XX_DBGMCU_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup DBGMCU
-  * @{
-  */ 
-/* Exported types ------------------------------------------------------------*/ 
-/* Exported constants --------------------------------------------------------*/
-
-
-/** @defgroup DBGMCU_Exported_Constants
-  * @{
-  */
-
-#define DBGMCU_STOP                  DBGMCU_CR_DBG_STOP
-#define DBGMCU_STANDBY               DBGMCU_CR_DBG_STANDBY
-#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF9) == 0x00) && ((PERIPH) != 0x00))
-
-#define DBGMCU_TIM2_STOP             DBGMCU_APB1_FZ_DBG_TIM2_STOP
-#define DBGMCU_TIM3_STOP             DBGMCU_APB1_FZ_DBG_TIM3_STOP
-#define DBGMCU_TIM6_STOP             DBGMCU_APB1_FZ_DBG_TIM6_STOP
-#define DBGMCU_TIM14_STOP            DBGMCU_APB1_FZ_DBG_TIM14_STOP
-#define DBGMCU_RTC_STOP              DBGMCU_APB1_FZ_DBG_RTC_STOP
-#define DBGMCU_WWDG_STOP             DBGMCU_APB1_FZ_DBG_WWDG_STOP
-#define DBGMCU_IWDG_STOP             DBGMCU_APB1_FZ_DBG_IWDG_STOP
-#define DBGMCU_I2C1_SMBUS_TIMEOUT    DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT
-#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xFFDFE2EC) == 0x00) && ((PERIPH) != 0x00))
-
-#define DBGMCU_TIM1_STOP             DBGMCU_APB2_FZ_DBG_TIM1_STOP
-#define DBGMCU_TIM15_STOP            DBGMCU_APB2_FZ_DBG_TIM15_STOP
-#define DBGMCU_TIM16_STOP            DBGMCU_APB2_FZ_DBG_TIM16_STOP
-#define DBGMCU_TIM17_STOP            DBGMCU_APB2_FZ_DBG_TIM17_STOP
-#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8F7FF) == 0x00) && ((PERIPH) != 0x00))
-
-/**
-  * @}
-  */ 
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */ 
-
-/* Device and Revision ID management functions ********************************/ 
-uint32_t DBGMCU_GetREVID(void);
-uint32_t DBGMCU_GetDEVID(void);
-
-/* Peripherals Configuration functions ****************************************/ 
-void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
-void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
-void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_DBGMCU_H */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,194 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_exti.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file contains all the functions prototypes for the EXTI 
-  *          firmware library
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_EXTI_H
-#define __STM32F0XX_EXTI_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup EXTI
-  * @{
-  */
-/* Exported types ------------------------------------------------------------*/
-
-/** 
-  * @brief  EXTI mode enumeration  
-  */
-
-typedef enum
-{
-  EXTI_Mode_Interrupt = 0x00,
-  EXTI_Mode_Event = 0x04
-}EXTIMode_TypeDef;
-
-#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
-
-/** 
-  * @brief  EXTI Trigger enumeration  
-  */
-
-typedef enum
-{
-  EXTI_Trigger_Rising = 0x08,
-  EXTI_Trigger_Falling = 0x0C,
-  EXTI_Trigger_Rising_Falling = 0x10
-}EXTITrigger_TypeDef;
-
-#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
-                                  ((TRIGGER) == EXTI_Trigger_Falling) || \
-                                  ((TRIGGER) == EXTI_Trigger_Rising_Falling))
-/**
-  * @brief  EXTI Init Structure definition
-  */
-
-typedef struct
-{
-  uint32_t EXTI_Line;               /*!< Specifies the EXTI lines to be enabled or disabled.
-                                         This parameter can be any combination of @ref EXTI_Lines */
-
-  EXTIMode_TypeDef EXTI_Mode;       /*!< Specifies the mode for the EXTI lines.
-                                         This parameter can be a value of @ref EXTIMode_TypeDef */
-
-  EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
-                                         This parameter can be a value of @ref EXTIMode_TypeDef */
-
-  FunctionalState EXTI_LineCmd;     /*!< Specifies the new state of the selected EXTI lines.
-                                         This parameter can be set either to ENABLE or DISABLE */
-}EXTI_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup EXTI_Exported_Constants
-  * @{
-  */
-/** @defgroup EXTI_Lines 
-  * @{
-  */
-
-#define EXTI_Line0       ((uint32_t)0x00000001)  /*!< External interrupt line 0  */
-#define EXTI_Line1       ((uint32_t)0x00000002)  /*!< External interrupt line 1  */
-#define EXTI_Line2       ((uint32_t)0x00000004)  /*!< External interrupt line 2  */
-#define EXTI_Line3       ((uint32_t)0x00000008)  /*!< External interrupt line 3  */
-#define EXTI_Line4       ((uint32_t)0x00000010)  /*!< External interrupt line 4  */
-#define EXTI_Line5       ((uint32_t)0x00000020)  /*!< External interrupt line 5  */
-#define EXTI_Line6       ((uint32_t)0x00000040)  /*!< External interrupt line 6  */
-#define EXTI_Line7       ((uint32_t)0x00000080)  /*!< External interrupt line 7  */
-#define EXTI_Line8       ((uint32_t)0x00000100)  /*!< External interrupt line 8  */
-#define EXTI_Line9       ((uint32_t)0x00000200)  /*!< External interrupt line 9  */
-#define EXTI_Line10      ((uint32_t)0x00000400)  /*!< External interrupt line 10 */
-#define EXTI_Line11      ((uint32_t)0x00000800)  /*!< External interrupt line 11 */
-#define EXTI_Line12      ((uint32_t)0x00001000)  /*!< External interrupt line 12 */
-#define EXTI_Line13      ((uint32_t)0x00002000)  /*!< External interrupt line 13 */
-#define EXTI_Line14      ((uint32_t)0x00004000)  /*!< External interrupt line 14 */
-#define EXTI_Line15      ((uint32_t)0x00008000)  /*!< External interrupt line 15 */
-#define EXTI_Line16      ((uint32_t)0x00010000)  /*!< External interrupt line 16 
-                                                      Connected to the PVD Output */
-#define EXTI_Line17      ((uint32_t)0x00020000)  /*!< Internal interrupt line 17 
-                                                      Connected to the RTC Alarm 
-                                                      event */
-#define EXTI_Line19      ((uint32_t)0x00080000)  /*!< Internal interrupt line 19
-                                                      Connected to the RTC Tamper
-                                                      and Time Stamp events */
-#define EXTI_Line21      ((uint32_t)0x00200000)  /*!< Internal interrupt line 21
-                                                      Connected to the Comparator 1
-                                                      event */
-#define EXTI_Line22      ((uint32_t)0x00400000)  /*!< Internal interrupt line 22
-                                                      Connected to the Comparator 2
-                                                      event */
-#define EXTI_Line23      ((uint32_t)0x00800000)  /*!< Internal interrupt line 23
-                                                      Connected to the I2C1 wakeup
-                                                      event */
-#define EXTI_Line25      ((uint32_t)0x02000000)  /*!< Internal interrupt line 25
-                                                      Connected to the USART1 wakeup
-                                                      event */
-#define EXTI_Line27      ((uint32_t)0x08000000)  /*!< Internal interrupt line 27
-                                                      Connected to the CEC wakeup
-                                                      event */
-
-#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xF5140000) == 0x00) && ((LINE) != (uint16_t)0x00))
-
-#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
-                                ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
-                                ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
-                                ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
-                                ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
-                                ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
-                                ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
-                                ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
-                                ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
-                                ((LINE) == EXTI_Line19) || ((LINE) == EXTI_Line21) || \
-                                ((LINE) == EXTI_Line22))
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-/* Function used to set the EXTI configuration to the default reset state *****/
-void EXTI_DeInit(void);
-
-/* Initialization and Configuration functions *********************************/
-void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
-void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
-void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
-
-/* Interrupts and flags management functions **********************************/
-FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
-void EXTI_ClearFlag(uint32_t EXTI_Line);
-ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
-void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_EXTI_H */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,140 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_iwdg.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file contains all the functions prototypes for the IWDG 
-  *          firmware library.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_IWDG_H
-#define __STM32F0XX_IWDG_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup IWDG
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup IWDG_Exported_Constants
-  * @{
-  */
-
-/** @defgroup IWDG_WriteAccess
-  * @{
-  */
-
-#define IWDG_WriteAccess_Enable     ((uint16_t)0x5555)
-#define IWDG_WriteAccess_Disable    ((uint16_t)0x0000)
-#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
-                                      ((ACCESS) == IWDG_WriteAccess_Disable))
-/**
-  * @}
-  */
-
-/** @defgroup IWDG_prescaler 
-  * @{
-  */
-
-#define IWDG_Prescaler_4            ((uint8_t)0x00)
-#define IWDG_Prescaler_8            ((uint8_t)0x01)
-#define IWDG_Prescaler_16           ((uint8_t)0x02)
-#define IWDG_Prescaler_32           ((uint8_t)0x03)
-#define IWDG_Prescaler_64           ((uint8_t)0x04)
-#define IWDG_Prescaler_128          ((uint8_t)0x05)
-#define IWDG_Prescaler_256          ((uint8_t)0x06)
-#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4)  || \
-                                      ((PRESCALER) == IWDG_Prescaler_8)  || \
-                                      ((PRESCALER) == IWDG_Prescaler_16) || \
-                                      ((PRESCALER) == IWDG_Prescaler_32) || \
-                                      ((PRESCALER) == IWDG_Prescaler_64) || \
-                                      ((PRESCALER) == IWDG_Prescaler_128)|| \
-                                      ((PRESCALER) == IWDG_Prescaler_256))
-/**
-  * @}
-  */
-
-/** @defgroup IWDG_Flag 
-  * @{
-  */
-
-#define IWDG_FLAG_PVU               IWDG_SR_PVU
-#define IWDG_FLAG_RVU               IWDG_SR_RVU
-#define IWDG_FLAG_WVU               IWDG_SR_WVU
-#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)  || \
-                            ((FLAG) == IWDG_FLAG_WVU))
-
-#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
-
-#define IS_IWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0xFFF)
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-/* Prescaler and Counter configuration functions ******************************/
-void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
-void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
-void IWDG_SetReload(uint16_t Reload);
-void IWDG_ReloadCounter(void);
-void IWDG_SetWindowValue(uint16_t WindowValue);
-
-/* IWDG activation function ***************************************************/
-void IWDG_Enable(void);
-
-/* Flag management function ***************************************************/
-FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_IWDG_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,143 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_misc.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file contains all the functions prototypes for the miscellaneous
-  *          firmware library functions (add-on to CMSIS functions).
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_MISC_H
-#define __STM32F0XX_MISC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup MISC
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** 
-  * @brief  NVIC Init Structure definition  
-  */
-
-typedef struct
-{
-  uint8_t NVIC_IRQChannel;             /*!< Specifies the IRQ channel to be enabled or disabled.
-                                            This parameter can be a value of @ref IRQn_Type 
-                                            (For the complete STM32 Devices IRQ Channels list, 
-                                            please refer to stm32f0xx.h file) */
-
-  uint8_t NVIC_IRQChannelPriority;     /*!< Specifies the priority level for the IRQ channel specified
-                                            in NVIC_IRQChannel. This parameter can be a value
-                                            between 0 and 3.  */
-
-  FunctionalState NVIC_IRQChannelCmd;  /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
-                                            will be enabled or disabled. 
-                                            This parameter can be set either to ENABLE or DISABLE */   
-} NVIC_InitTypeDef;
-
-/**  
-  *
-@verbatim   
-
-@endverbatim
-*/
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup MISC_Exported_Constants
-  * @{
-  */
-
-/** @defgroup MISC_System_Low_Power 
-  * @{
-  */
-
-#define NVIC_LP_SEVONPEND            ((uint8_t)0x10)
-#define NVIC_LP_SLEEPDEEP            ((uint8_t)0x04)
-#define NVIC_LP_SLEEPONEXIT          ((uint8_t)0x02)
-#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
-                        ((LP) == NVIC_LP_SLEEPDEEP) || \
-                        ((LP) == NVIC_LP_SLEEPONEXIT))
-/**
-  * @}
-  */
-
-/** @defgroup MISC_Preemption_Priority_Group 
-  * @{
-  */
-#define IS_NVIC_PRIORITY(PRIORITY)  ((PRIORITY) < 0x04)
-
-/**
-  * @}
-  */
-
-/** @defgroup MISC_SysTick_clock_source 
-  * @{
-  */
-
-#define SysTick_CLKSource_HCLK_Div8    ((uint32_t)0xFFFFFFFB)
-#define SysTick_CLKSource_HCLK         ((uint32_t)0x00000004)
-#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
-                                       ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */ 
-
-void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
-void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
-void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_MISC_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,186 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_pwr.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file contains all the functions prototypes for the PWR firmware 
-  *          library.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_PWR_H
-#define __STM32F0XX_PWR_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup PWR
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Constants
-  * @{
-  */ 
-
-/** @defgroup PWR_PVD_detection_level 
-  * @{
-  */ 
-
-#define PWR_PVDLevel_0                  PWR_CR_PLS_LEV0
-#define PWR_PVDLevel_1                  PWR_CR_PLS_LEV1
-#define PWR_PVDLevel_2                  PWR_CR_PLS_LEV2
-#define PWR_PVDLevel_3                  PWR_CR_PLS_LEV3
-#define PWR_PVDLevel_4                  PWR_CR_PLS_LEV4
-#define PWR_PVDLevel_5                  PWR_CR_PLS_LEV5
-#define PWR_PVDLevel_6                  PWR_CR_PLS_LEV6
-#define PWR_PVDLevel_7                  PWR_CR_PLS_LEV7 
-
-#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \
-                                 ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \
-                                 ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \
-                                 ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))
-/**
-  * @}
-  */
-
-/** @defgroup PWR_WakeUp_Pins 
-  * @{
-  */
-
-#define PWR_WakeUpPin_1                 PWR_CSR_EWUP1
-#define PWR_WakeUpPin_2                 PWR_CSR_EWUP2
-#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || \
-                                ((PIN) == PWR_WakeUpPin_2))
-/**
-  * @}
-  */
-
- 
-/** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode 
-  * @{
-  */
-
-#define PWR_Regulator_ON                ((uint32_t)0x00000000)
-#define PWR_Regulator_LowPower          PWR_CR_LPSDSR
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
-                                     ((REGULATOR) == PWR_Regulator_LowPower))
-/**
-  * @}
-  */
-
-/** @defgroup PWR_SLEEP_mode_entry 
-  * @{
-  */
-
-#define PWR_SLEEPEntry_WFI              ((uint8_t)0x01)
-#define PWR_SLEEPEntry_WFE              ((uint8_t)0x02)
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE))
- 
-/**
-  * @}
-  */
-
-/** @defgroup PWR_STOP_mode_entry 
-  * @{
-  */
-
-#define PWR_STOPEntry_WFI               ((uint8_t)0x01)
-#define PWR_STOPEntry_WFE               ((uint8_t)0x02)
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
- 
-/**
-  * @}
-  */
-
-/** @defgroup PWR_Flag 
-  * @{
-  */
-
-#define PWR_FLAG_WU                     PWR_CSR_WUF
-#define PWR_FLAG_SB                     PWR_CSR_SBF
-#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
-#define PWR_FLAG_VREFINTRDY             PWR_CSR_VREFINTRDYF
-
-#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
-                               ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY))
-
-#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-/* Function used to set the PWR configuration to the default reset state ******/
-void PWR_DeInit(void);
-
-/* Backup Domain Access function **********************************************/
-void PWR_BackupAccessCmd(FunctionalState NewState);
-
-/* PVD configuration functions ************************************************/
-void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
-void PWR_PVDCmd(FunctionalState NewState);
-
-/* WakeUp pins configuration functions ****************************************/
-void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState);
-
-/* Low Power modes configuration functions ************************************/
-void PWR_EnterSleepMode(uint8_t PWR_SLEEPEntry);
-void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
-void PWR_EnterSTANDBYMode(void);
-
-/* Flags management functions *************************************************/
-FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
-void PWR_ClearFlag(uint32_t PWR_FLAG);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_PWR_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,109 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_wwdg.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file contains all the functions prototypes for the WWDG 
-  *          firmware library.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_WWDG_H
-#define __STM32F0XX_WWDG_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup WWDG
-  * @{
-  */ 
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup WWDG_Exported_Constants
-  * @{
-  */ 
-  
-/** @defgroup WWDG_Prescaler 
-  * @{
-  */ 
-  
-#define WWDG_Prescaler_1    ((uint32_t)0x00000000)
-#define WWDG_Prescaler_2    ((uint32_t)0x00000080)
-#define WWDG_Prescaler_4    ((uint32_t)0x00000100)
-#define WWDG_Prescaler_8    ((uint32_t)0x00000180)
-#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
-                                      ((PRESCALER) == WWDG_Prescaler_2) || \
-                                      ((PRESCALER) == WWDG_Prescaler_4) || \
-                                      ((PRESCALER) == WWDG_Prescaler_8))
-#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
-#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-/*  Function used to set the WWDG configuration to the default reset state ****/  
-void WWDG_DeInit(void);
-
-/* Prescaler, Refresh window and Counter configuration functions **************/
-void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
-void WWDG_SetWindowValue(uint8_t WindowValue);
-void WWDG_EnableIT(void);
-void WWDG_SetCounter(uint8_t Counter);
-
-/* WWDG activation functions **************************************************/
-void WWDG_Enable(uint8_t Counter);
-
-/* Interrupts and flags management functions **********************************/
-FlagStatus WWDG_GetFlagStatus(void);
-void WWDG_ClearFlag(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_WWDG_H */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,169 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_misc.c
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   This file provides all the miscellaneous firmware functions (add-on
-  *          to CMSIS functions).
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_misc.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @defgroup MISC 
-  * @brief MISC driver modules
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup MISC_Private_Functions
-  * @{
-  */
-/**
-  *
-@verbatim
- *******************************************************************************
-                   ##### Interrupts configuration functions #####
- *******************************************************************************
-    [..] This section provide functions allowing to configure the NVIC interrupts
-        (IRQ). The Cortex-M0 exceptions are managed by CMSIS functions.
-         (#) Enable and Configure the priority of the selected IRQ Channels. 
-             The priority can be 0..3. 
-
-        -@- Lower priority values gives higher priority.
-        -@- Priority Order:
-            (#@) Lowest priority.
-            (#@) Lowest hardware priority (IRQn position).  
-  
-@endverbatim
-*/
-
-/**
-  * @brief  Initializes the NVIC peripheral according to the specified
-  *         parameters in the NVIC_InitStruct.
-  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
-  *         function should be called before.    
-  * @param  NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
-  *         the configuration information for the specified NVIC peripheral.
-  * @retval None
-  */
-void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
-{
-  uint32_t tmppriority = 0x00;
-  
-  /* Check the parameters */
-  assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
-  assert_param(IS_NVIC_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPriority));  
-    
-  if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
-  {
-    /* Compute the Corresponding IRQ Priority --------------------------------*/    
-    tmppriority = NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel >> 0x02];
-    tmppriority &= (uint32_t)(~(((uint32_t)0xFF) << ((NVIC_InitStruct->NVIC_IRQChannel & 0x03) * 8)));
-    tmppriority |= (uint32_t)((((uint32_t)NVIC_InitStruct->NVIC_IRQChannelPriority << 6) & 0xFF) << ((NVIC_InitStruct->NVIC_IRQChannel & 0x03) * 8));    
-    
-    NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel >> 0x02] = tmppriority;
-    
-    /* Enable the Selected IRQ Channels --------------------------------------*/
-    NVIC->ISER[0] = (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
-  }
-  else
-  {
-    /* Disable the Selected IRQ Channels -------------------------------------*/
-    NVIC->ICER[0] = (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
-  }
-}
-
-/**
-  * @brief  Selects the condition for the system to enter low power mode.
-  * @param  LowPowerMode: Specifies the new mode for the system to enter low power mode.
-  *   This parameter can be one of the following values:
-  *     @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend.
-  *     @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request.
-  *     @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit.
-  * @param  NewState: new state of LP condition. 
-  *         This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_NVIC_LP(LowPowerMode));
-  
-  assert_param(IS_FUNCTIONAL_STATE(NewState));  
-  
-  if (NewState != DISABLE)
-  {
-    SCB->SCR |= LowPowerMode;
-  }
-  else
-  {
-    SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
-  }
-}
-
-/**
-  * @brief  Configures the SysTick clock source.
-  * @param  SysTick_CLKSource: specifies the SysTick clock source.
-  *   This parameter can be one of the following values:
-  *     @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
-  *     @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
-  * @retval None
-  */
-void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
-{
-  /* Check the parameters */
-  assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
-  
-  if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
-  {
-    SysTick->CTRL |= SysTick_CLKSource_HCLK;
-  }
-  else
-  {
-    SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
-  }
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,14 +0,0 @@
-# for module compiling
-import os
-Import('RTT_ROOT')
-
-cwd = str(Dir('#'))
-objs = []
-list = os.listdir(cwd)
-
-for d in list:
-    path = os.path.join(cwd, d)
-    if os.path.isfile(os.path.join(path, 'SConscript')):
-        objs = objs + SConscript(os.path.join(d, 'SConscript'))
-
-Return('objs')
@@ -1,34 +0,0 @@
-import os
-import sys
-import rtconfig
-
-if os.getenv('RTT_ROOT'):
-    RTT_ROOT = os.getenv('RTT_ROOT')
-else:
-    RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
-
-sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
-from building import *
-
-TARGET = 'rtthread-stm32f0xx.' + rtconfig.TARGET_EXT
-
-env = Environment(tools = ['mingw'],
-	AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
-	CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
-	AR = rtconfig.AR, ARFLAGS = '-rc',
-	LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
-env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
-
-if rtconfig.PLATFORM == 'iar':
-	env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
-	env.Replace(ARFLAGS = [''])
-	env.Replace(LINKCOM = ['$LINK $SOURCES $LINKFLAGS -o $TARGET --map project.map'])
-
-Export('RTT_ROOT')
-Export('rtconfig')
-
-# prepare building environment
-objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
-
-# make a building
-DoBuilding(TARGET, objs)
@@ -1,11 +0,0 @@
-Import('RTT_ROOT')
-Import('rtconfig')
-from building import *
-
-cwd     = os.path.join(str(Dir('#')), 'applications')
-src	= Glob('*.c')
-CPPPATH = [cwd, str(Dir('#'))]
-
-group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
-
-Return('group')
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- * 2013-11-15     bright       add init thread and components initial
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <stdio.h>
-
-#include <board.h>
-#include <rtthread.h>
-
-#include "led.h"
-
-/* led thread entry */
-static void led_thread_entry(void* parameter)
-{
-	while(1)
-	{
-        rt_hw_led_on();
-        rt_thread_delay(RT_TICK_PER_SECOND);
-
-        rt_hw_led_off();
-        rt_thread_delay(RT_TICK_PER_SECOND);
-	}
-}
-
-static void rt_init_thread_entry(void* parameter)
-{
-	rt_thread_t led_thread;
-
-/* Initialization RT-Thread Components */
-#ifdef RT_USING_COMPONENTS_INIT
-    rt_components_init();
-#endif
-
-/* Set finsh device */
-#ifdef  RT_USING_FINSH
-    finsh_set_device(RT_CONSOLE_DEVICE_NAME);
-#endif  /* RT_USING_FINSH */
-
-    /* Create led thread */
-    led_thread = rt_thread_create("led",
-    		led_thread_entry, RT_NULL,
-    		256, 20, 20);
-    if(led_thread != RT_NULL)
-    	rt_thread_startup(led_thread);
-}
-
-int rt_application_init()
-{
-	rt_thread_t init_thread;
-
-#if (RT_THREAD_PRIORITY_MAX == 32)
-    init_thread = rt_thread_create("init",
-                                   rt_init_thread_entry, RT_NULL,
-                                   512, 8, 20);
-#else
-    init_thread = rt_thread_create("init",
-                                   rt_init_thread_entry, RT_NULL,
-                                   512, 80, 20);
-#endif
-    if(init_thread != RT_NULL)
-    	rt_thread_startup(init_thread);
-
-    return 0;
-}
-
-
-/*@}*/
@@ -1,108 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- * 2013-11-15     bright       modify for stm32f0xx version and components initial
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "board.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-
-#if defined(__CC_ARM) || defined(__CLANG_ARM)
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#define STM32_SRAM_BEGIN    (&Image$$RW_IRAM1$$ZI$$Limit)
-#elif __ICCARM__
-#pragma section="HEAP"
-#define STM32_SRAM_BEGIN    (__segment_end("HEAP"))
-#else
-extern int __bss_end;
-#define STM32_SRAM_BEGIN    (&__bss_end)
-#endif
-
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(uint8_t* file, uint32_t line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-#ifdef RT_USING_HEAP
-    rt_system_heap_init((void*)STM32_SRAM_BEGIN, (void*)STM32_SRAM_END);
-#endif
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-	/* init application */
-	rt_application_init();
-
-    /* init timer thread */
-    rt_system_timer_thread_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	/* disable interrupt first */
-	rt_hw_interrupt_disable();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/
@@ -1,11 +0,0 @@
-Import('RTT_ROOT')
-Import('rtconfig')
-from building import *
-
-cwd     = os.path.join(str(Dir('#')), 'drivers')
-src	= Glob('*.c')
-CPPPATH = [cwd]
-
-group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
-
-Return('group')
@@ -1,150 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      first implementation
- * 2013-11-15     bright       add RCC initial and print RCC freq function
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "board.h"
-#include "usart.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-/*******************************************************************************
-* Function Name  : NVIC_Configuration
-* Description    : Configures Vector Table base location.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void NVIC_Configuration(void)
-{
-//    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
-}
-
-/**
-* @brief  Inserts a delay time.
-* @param  nCount: specifies the delay time length.
-* @retval None
-*/
-static void Delay(__IO uint32_t nCount)
-{
-	/* Decrement nCount value */
-	while (nCount != 0)
-	{
-		nCount--;
-	}
-}
-
-/**
- * This RCC initial for system.
- * use HSI clock source and pll
- * HSI = 8; sysclk = 8/2 * 12 = 48MHZ
- * sysclk source is pllclk
- * AHB prescaler is 1, HCLK = SYSCKL = SystemCoreClock = 48MHZ
- */
-static void RCC_Configuration(void)
-{
-	RCC_DeInit();
-	/* setup HSI */
-	RCC_HSICmd(ENABLE);
-	/* Configure PLL source is HSI */
-	RCC_PLLConfig(RCC_PLLSource_HSI_Div2, RCC_PLLMul_12);
-	RCC_PLLCmd(ENABLE);
-	/* Configure SYSCLK source is PLL */
-	RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
-	/* Conigure AHB prescaler value is 1 */
-	RCC_HCLKConfig(RCC_SYSCLK_Div1);
-	/* Delay for RCC setup */
-	Delay(0x3FFFF);
-	/* Update SystemCoreClock value from RCC configure */
-	SystemCoreClockUpdate();
-}
-
-#ifdef PRINT_RCC_FREQ_INFO
-/**
- * print RCC freq information
- *
- * for example:
- *
- * SYSCLK_Frequency is 48000000HZ
- * PCLK_Frequency is 48000000HZ
- * HCLK_Frequency is 48000000HZ
- * CECCLK_Frequency is 32786HZ
- * ADCCLK_Frequency is 14000000HZ
- * USART1CLK_Frequency is 48000000HZ
- * I2C1CLK_Frequency is 8000000HZ
- * SystemCoreClock is 48000000HZ
- *
- */
-void print_rcc_freq_info(void)
-{
-	RCC_ClocksTypeDef RCC_ClockFreq;
-
-	RCC_GetClocksFreq(&RCC_ClockFreq);
-
-	rt_kprintf("\nSYSCLK_Frequency is %dHZ", RCC_ClockFreq.SYSCLK_Frequency);
-	rt_kprintf("\nPCLK_Frequency is %dHZ", RCC_ClockFreq.PCLK_Frequency);
-	rt_kprintf("\nHCLK_Frequency is %dHZ", RCC_ClockFreq.HCLK_Frequency);
-
-	rt_kprintf("\nCECCLK_Frequency is %dHZ", RCC_ClockFreq.CECCLK_Frequency);
-	rt_kprintf("\nADCCLK_Frequency is %dHZ", RCC_ClockFreq.ADCCLK_Frequency);
-	rt_kprintf("\nUSART1CLK_Frequency is %dHZ", RCC_ClockFreq.USART1CLK_Frequency);
-	rt_kprintf("\nI2C1CLK_Frequency is %dHZ", RCC_ClockFreq.I2C1CLK_Frequency);
-	rt_kprintf("\nSystemCoreClock is %dHZ\n", SystemCoreClock);
-}
-#endif
-
-/**
- * This is the timer interrupt service routine.
- *
- */
-void SysTick_Handler(void)
-{
-	/* enter interrupt */
-	rt_interrupt_enter();
-
-	rt_tick_increase();
-
-	/* leave interrupt */
-	rt_interrupt_leave();
-}
-/**
- * This function will initial STM32 board.
- */
-void rt_hw_board_init()
-{
-	/* NVIC Configuration */
-	NVIC_Configuration();
-
-	/* Configure the SysTick */
-	RCC_Configuration();
-	SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
-
-	/* Initial usart deriver, and set console device */
-	rt_hw_usart_init();
-#ifdef RT_USING_CONSOLE
-	rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
-#endif
-	/* Print RCC freq info */
-#ifdef PRINT_RCC_FREQ_INFO
-	print_rcc_freq_info();
-#endif
-	/* Call components board initial (use INIT_BOARD_EXPORT()) */
-#ifdef RT_USING_COMPONENTS_INIT
-    rt_components_board_init();
-#endif
-}
-
-/*@}*/
@@ -1,49 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-09-22     Bernard      add board.h to this bsp
- * 2013-11-15     bright       fix SRAM size for heap management
- */
-
-// <<< Use Configuration Wizard in Context Menu >>>
-#ifndef __BOARD_H__
-#define __BOARD_H__
-
-#include <stm32f0xx.h>
-
-/* board configuration */
-// <o> SDCard Driver <1=>SDIO sdcard <0=>SPI MMC card
-// 	<i>Default: 1
-#define STM32_USE_SDIO			0
-
-/* whether use board external SRAM memory */
-// <e>Use external SRAM memory on the board
-// 	<i>Enable External SRAM memory
-#define STM32_EXT_SRAM          0
-//	<o>Begin Address of External SRAM
-//		<i>Default: 0x68000000
-#define STM32_EXT_SRAM_BEGIN    0x68000000 /* the begining address of external SRAM */
-//	<o>End Address of External SRAM
-//		<i>Default: 0x68080000
-#define STM32_EXT_SRAM_END      0x68080000 /* the end address of external SRAM */
-// </e>
-
-// <o> Internal SRAM memory size[Kbytes] <8-64>
-//	<i>Default: 64
-#define STM32_SRAM_SIZE         8
-#define STM32_SRAM_END          (0x20000000 + STM32_SRAM_SIZE * 1024)
-
-void rt_hw_board_init(void);
-
-/* SD Card init function */
-void rt_hw_msd_init(void);
-
-#define PRINT_RCC_FREQ_INFO
-
-#endif
-
-// <<< Use Configuration Wizard in Context Menu >>>
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2013-11-15     bright       the first version
- */
-
-#include <rtthread.h>
-#include "led.h"
-
-/*
-LED_GREEN: PC8
-LED_RED  : PC9
-*/
-
-/* Initial led gpio pin  */
-int rt_hw_led_init(void)
-{
-    GPIO_InitTypeDef  GPIO_InitStructure;
-
-    /* Enable the GPIO_LED Clock */
-    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOC, ENABLE);
-
-    /* Configure the GPIO_LED pin */
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
-    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-    GPIO_Init(GPIOC, &GPIO_InitStructure);
-
-    return 0;
-}
-/* Initial components for device */
-INIT_DEVICE_EXPORT(rt_hw_led_init);
@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2013-13-05     bright       the first version
- */
-
-#ifndef __LED_H__
-#define __LED_H__
-
-#include <rtthread.h>
-#include <stm32f0xx.h>
-
-#define rt_hw_led_on()   GPIO_SetBits(GPIOC, GPIO_Pin_9)
-#define rt_hw_led_off()  GPIO_ResetBits(GPIOC, GPIO_Pin_9)
-
-int rt_hw_led_init(void);
-
-#endif
-
@@ -1,81 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC_DMA/stm32f0xx_conf.h 
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_CONF_H
-#define __STM32F0XX_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Comment the line below to disable peripheral header file inclusion */
-#include "stm32f0xx_adc.h"
-#include "stm32f0xx_cec.h"
-#include "stm32f0xx_crc.h"
-#include "stm32f0xx_comp.h"
-#include "stm32f0xx_dac.h"
-#include "stm32f0xx_dbgmcu.h"
-#include "stm32f0xx_dma.h"
-#include "stm32f0xx_exti.h"
-#include "stm32f0xx_flash.h"
-#include "stm32f0xx_gpio.h"
-#include "stm32f0xx_syscfg.h"
-#include "stm32f0xx_i2c.h"
-#include "stm32f0xx_iwdg.h"
-#include "stm32f0xx_pwr.h"
-#include "stm32f0xx_rcc.h"
-#include "stm32f0xx_rtc.h"
-#include "stm32f0xx_spi.h"
-#include "stm32f0xx_tim.h"
-#include "stm32f0xx_usart.h"
-#include "stm32f0xx_wwdg.h"
-#include "stm32f0xx_misc.h"  /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F0XX_CONF_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,96 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_it.c 
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    23-March-2012
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include <stm32f0xx.h>
-
-/** @addtogroup STM32F0-Discovery_Demo
-  * @{
-  */
-
-/** @addtogroup STM32F0XX_IT
-  * @brief Interrupts driver modules
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M0 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-
-/******************************************************************************/
-/*                 STM32F0xx Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f0xx.s).                                               */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2013-11-15     bright       the first version
- */
-
-#ifndef __USART_H__
-#define __USART_H__
-
-#include <rthw.h>
-#include <rtthread.h>
-#include "stm32f0xx.h"
-
-#define RT_USING_UART1
-#define RT_USING_UART2
-
-#define UART_ENABLE_IRQ(n)            NVIC_EnableIRQ((n))
-#define UART_DISABLE_IRQ(n)           NVIC_DisableIRQ((n))
-
-void rt_hw_usart_init(void);
-
-#endif
@@ -1,3 +0,0 @@
-board info:
-stm32f0discovery
-http://www.st.com/stm32f0discovery
@@ -1,116 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	   8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_DEBUG_COLOR
-#define RT_DEBUG_INIT 1
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-/* #define RT_USING_HOOK */
-
-/* Using Software Timer */
-/* #define RT_USING_TIMER_SOFT */
-#define RT_TIMER_THREAD_PRIO		4
-#define RT_TIMER_THREAD_STACK_SIZE	512
-#define RT_TIMER_TICK_PER_SECOND	10
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-/* #define RT_USING_EVENT */
-
-/* Using MailBox */
-/* #define RT_USING_MAILBOX */
-
-/* Using Message Queue */
-/* #define RT_USING_MESSAGEQUEUE */
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-/* #define RT_USING_MEMPOOL */
-
-/* Using Dynamic Heap Management */
-#define RT_USING_HEAP
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-#define RT_USING_TINY_SIZE
-
-// <bool name="RT_USING_COMPONENTS_INIT" description="Using RT-Thread components initialization" default="true" />
-#define RT_USING_COMPONENTS_INIT
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-// <bool name="RT_USING_DEVICE_IPC" description="Using device communication" default="true" />
-#define RT_USING_DEVICE_IPC
-// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
-#define RT_USING_SERIAL
-#define RT_SERIAL_USING_DMA
-
-/* SECTION: Console options */
-#define RT_USING_CONSOLE
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-// <string name="RT_CONSOLE_DEVICE_NAME" description="The device name for console" default="uart1" />
-#define RT_CONSOLE_DEVICE_NAME	    "uart1"
-
-
-
-/* SECTION: finsh, a C-Express shell */
-#define RT_USING_FINSH
-/* configure finsh parameters */
-#define FINSH_THREAD_PRIORITY 25
-#define FINSH_THREAD_STACK_SIZE	1024
-#define FINSH_HISTORY_LINES	1
-/* Using symbol table */
-//#define FINSH_USING_SYMTAB
-//#define FINSH_USING_DESCRIPTION
-#define FINSH_USING_MSH
-#define FINSH_USING_MSH_ONLY
-
-/* SECTION: libc management */
-// #define RT_USING_LIBC
-
-/* SECTION: device filesystem */
-/* #define RT_USING_DFS */
-//#define RT_USING_DFS_ELMFAT
-#define RT_DFS_ELM_WORD_ACCESS
-/* Reentrancy (thread safe) of the FatFs module.  */
-#define RT_DFS_ELM_REENTRANT
-/* Number of volumes (logical drives) to be used. */
-#define RT_DFS_ELM_DRIVES			2
-/* #define RT_DFS_ELM_USE_LFN			1 */
-#define RT_DFS_ELM_MAX_LFN			255
-/* Maximum sector size to be handled. */
-#define RT_DFS_ELM_MAX_SECTOR_SIZE  512
-
-#define RT_USING_DFS_ROMFS
-
-/* the max number of mounted filesystem */
-#define DFS_FILESYSTEMS_MAX			2
-/* the max number of opened files 		*/
-#define DFS_FD_MAX					4
-
-#endif
@@ -1,127 +0,0 @@
-import os
-
-# toolchains options
-ARCH='arm'
-CPU='cortex-m0'
-CROSS_TOOL='keil'
-
-if os.getenv('RTT_CC'):
-	CROSS_TOOL = os.getenv('RTT_CC')
-
-# cross_tool provides the cross compiler
-# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
-if  CROSS_TOOL == 'gcc':
-	PLATFORM 	= 'gcc'
-	EXEC_PATH 	= 'C:/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin'
-elif CROSS_TOOL == 'keil':
-	PLATFORM 	= 'armcc'
-	EXEC_PATH 	= 'C:/Keil'
-elif CROSS_TOOL == 'iar':
-    print('================ERROR============================')
-    print('Not support iar yet!')
-    print('=================================================')
-    exit(0)
-
-if os.getenv('RTT_EXEC_PATH'):
-	EXEC_PATH = os.getenv('RTT_EXEC_PATH')
-
-#BUILD = 'debug'
-BUILD = 'release'
-STM32_TYPE = 'STM32F0XX'
-
-if PLATFORM == 'gcc':
-    # toolchains
-    PREFIX = 'arm-none-eabi-'
-    CC = PREFIX + 'gcc'
-    AS = PREFIX + 'gcc'
-    AR = PREFIX + 'ar'
-    LINK = PREFIX + 'gcc'
-    TARGET_EXT = 'elf'
-    SIZE = PREFIX + 'size'
-    OBJDUMP = PREFIX + 'objdump'
-    OBJCPY = PREFIX + 'objcopy'
-
-    DEVICE = ' -mcpu=cortex-m0 -mthumb -ffunction-sections -fdata-sections'
-    CFLAGS = DEVICE 
-    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
-    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-stm32.map,-cref,-u,Reset_Handler -T stm32_rom.ld'
-
-    CPATH = ''
-    LPATH = ''
-
-    if BUILD == 'debug':
-        CFLAGS += ' -O0 -gdwarf-2'
-        AFLAGS += ' -gdwarf-2'
-    else:
-        CFLAGS += ' -O2'
-
-    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
-
-elif PLATFORM == 'armcc':
-    # toolchains
-    CC = 'armcc'
-    AS = 'armasm'
-    AR = 'armar'
-    LINK = 'armlink'
-    TARGET_EXT = 'axf'
-
-    DEVICE = ' --device DARMSTM'
-    CFLAGS = DEVICE + ' --apcs=interwork'
-    AFLAGS = DEVICE
-    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-stm32.map --scatter stm32_rom.sct'
-
-    CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
-    LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
-
-    EXEC_PATH += '/arm/bin40/'
-
-    if BUILD == 'debug':
-        CFLAGS += ' -g -O0'
-        AFLAGS += ' -g'
-    else:
-        CFLAGS += ' -O2'
-
-    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
-
-elif PLATFORM == 'iar':
-    # toolchains
-    CC = 'iccarm'
-    AS = 'iasmarm'
-    AR = 'iarchive'
-    LINK = 'ilinkarm'
-    TARGET_EXT = 'out'
-
-    DEVICE = ' -D USE_STDPERIPH_DRIVER' + ' -D STM32F10X_HD'
-
-    CFLAGS = DEVICE
-    CFLAGS += ' --diag_suppress Pa050'
-    CFLAGS += ' --no_cse' 
-    CFLAGS += ' --no_unroll' 
-    CFLAGS += ' --no_inline' 
-    CFLAGS += ' --no_code_motion' 
-    CFLAGS += ' --no_tbaa' 
-    CFLAGS += ' --no_clustering' 
-    CFLAGS += ' --no_scheduling' 
-    CFLAGS += ' --debug' 
-    CFLAGS += ' --endian=little' 
-    CFLAGS += ' --cpu=Cortex-M0' 
-    CFLAGS += ' -e' 
-    CFLAGS += ' --fpu=None'
-    CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'    
-    CFLAGS += ' -Ol'    
-    CFLAGS += ' --use_c++_inline'
-        
-    AFLAGS = ''
-    AFLAGS += ' -s+' 
-    AFLAGS += ' -w+' 
-    AFLAGS += ' -r' 
-    AFLAGS += ' --cpu Cortex-M0' 
-    AFLAGS += ' --fpu None' 
-
-    LFLAGS = ' --config stm32f0xx_flash.icf'
-    LFLAGS += ' --redirect _Printf=_PrintfTiny' 
-    LFLAGS += ' --redirect _Scanf=_ScanfSmall' 
-    LFLAGS += ' --entry __iar_program_start'    
-
-    EXEC_PATH = EXEC_PATH + '/arm/bin/'
-    POST_ACTION = ''
@@ -1,141 +0,0 @@
-/*
- * linker script for STM32F0x with GNU ld
- * bernard.xiong 2009-10-14
- */
-
-/* Program Entry, set to mark it as "used" and avoid gc */
-MEMORY
-{
-    CODE (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 64KB flash */
-    DATA (rw) : ORIGIN = 0x20000000, LENGTH =  8k /* 8K sram */
-}
-ENTRY(Reset_Handler)
-_system_stack_size = 0x100;
-
-SECTIONS
-{
-    .text :
-    {
-        . = ALIGN(4);
-        KEEP(*(.isr_vector))            /* Startup code */
-        . = ALIGN(4);
-        *(.text)                        /* remaining code */
-        *(.text.*)                      /* remaining code */
-        *(.rodata)                      /* read-only data (constants) */
-        *(.rodata*)
-        *(.glue_7)
-        *(.glue_7t)
-        *(.gnu.linkonce.t*)
-
-        /* section information for finsh shell */
-        . = ALIGN(4);
-        __fsymtab_start = .;
-        KEEP(*(FSymTab))
-        __fsymtab_end = .;
-        . = ALIGN(4);
-        __vsymtab_start = .;
-        KEEP(*(VSymTab))
-        __vsymtab_end = .;
-        . = ALIGN(4);
-
-        /* section information for initial. */
-        . = ALIGN(4);
-        __rt_init_start = .;
-        KEEP(*(SORT(.rti_fn*)))
-        __rt_init_end = .;
-        . = ALIGN(4);
-
-        . = ALIGN(4);
-        _etext = .;
-    } > CODE = 0
-
-    /* .ARM.exidx is sorted, so has to go in its own output section.  */
-    __exidx_start = .;
-    .ARM.exidx :
-    {
-        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
-
-        /* This is used by the startup in order to initialize the .data secion */
-        _sidata = .;
-    } > CODE
-    __exidx_end = .;
-
-    /* .data section which is used for initialized data */
-
-    .data : AT (_sidata)
-    {
-        . = ALIGN(4);
-        /* This is used by the startup in order to initialize the .data secion */
-        _sdata = . ;
-
-        *(.data)
-        *(.data.*)
-        *(.gnu.linkonce.d*)
-
-        . = ALIGN(4);
-        /* This is used by the startup in order to initialize the .data secion */
-        _edata = . ;
-    } >DATA
-
-    .stack : 
-    {
-        . = . + _system_stack_size;
-        . = ALIGN(4);
-        _estack = .;
-    } >DATA
-
-    __bss_start = .;
-    .bss :
-    {
-        . = ALIGN(4);
-        /* This is used by the startup in order to initialize the .bss secion */
-        _sbss = .;
-
-        *(.bss)
-        *(.bss.*)
-        *(COMMON)
-
-        . = ALIGN(4);
-        /* This is used by the startup in order to initialize the .bss secion */
-        _ebss = . ;
-        
-        *(.bss.init)
-    } > DATA
-    __bss_end = .;
-
-    _end = .;
-
-    /* Stabs debugging sections.  */
-    .stab          0 : { *(.stab) }
-    .stabstr       0 : { *(.stabstr) }
-    .stab.excl     0 : { *(.stab.excl) }
-    .stab.exclstr  0 : { *(.stab.exclstr) }
-    .stab.index    0 : { *(.stab.index) }
-    .stab.indexstr 0 : { *(.stab.indexstr) }
-    .comment       0 : { *(.comment) }
-    /* DWARF debug sections.
-     * Symbols in the DWARF debugging sections are relative to the beginning
-     * of the section so we begin them at 0.  */
-    /* DWARF 1 */
-    .debug          0 : { *(.debug) }
-    .line           0 : { *(.line) }
-    /* GNU DWARF 1 extensions */
-    .debug_srcinfo  0 : { *(.debug_srcinfo) }
-    .debug_sfnames  0 : { *(.debug_sfnames) }
-    /* DWARF 1.1 and DWARF 2 */
-    .debug_aranges  0 : { *(.debug_aranges) }
-    .debug_pubnames 0 : { *(.debug_pubnames) }
-    /* DWARF 2 */
-    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-    .debug_abbrev   0 : { *(.debug_abbrev) }
-    .debug_line     0 : { *(.debug_line) }
-    .debug_frame    0 : { *(.debug_frame) }
-    .debug_str      0 : { *(.debug_str) }
-    .debug_loc      0 : { *(.debug_loc) }
-    .debug_macinfo  0 : { *(.debug_macinfo) }
-    /* SGI/MIPS DWARF 2 extensions */
-    .debug_weaknames 0 : { *(.debug_weaknames) }
-    .debug_funcnames 0 : { *(.debug_funcnames) }
-    .debug_typenames 0 : { *(.debug_typenames) }
-    .debug_varnames  0 : { *(.debug_varnames) }
-}
@@ -1,15 +0,0 @@
-; *************************************************************
-; *** Scatter-Loading Description File generated by uVision ***
-; *************************************************************
-
-LR_IROM1 0x08000000 0x00010000  {    ; load region size_region
-  ER_IROM1 0x08000000 0x00010000  {  ; load address = execution address
-   *.o (RESET, +First)
-   *(InRoot$$Sections)
-   .ANY (+RO)
-  }
-  RW_IRAM1 0x20000000 0x00002000  {  ; RW data
-   .ANY (+RW +ZI)
-  }
-}
-
@@ -1,36 +0,0 @@
-mainmenu "RT-Thread Configuration"
-
-config BSP_DIR
-    string
-    option env="BSP_ROOT"
-    default "."
-
-config RTT_DIR
-    string
-    option env="RTT_ROOT"
-    default "../.."
-    
-# you can change the RTT_ROOT default "../.." to your rtthread_root,
-# example: default "F:/git_repositories/rt-thread"
-
-config PKGS_DIR
-    string
-    option env="PKGS_ROOT"
-    default "packages"
-    
-config ENV_DIR
-    string
-    option env="ENV_ROOT"
-    default "/"
-
-source "$RTT_DIR/Kconfig"
-source "$PKGS_DIR/Kconfig"
-
-
-config SOC_STM32F1
-    bool 
-    select ARCH_ARM_CORTEX_M3
-    default y
-
-source "$BSP_DIR/drivers/Kconfig"
-