[BSP][STM32F1xx-HAL] fix hse when hse no trigger

修复当选择HSE 而HSE不起振时 assert的问题,并优化模拟器参数

bsp/stm32f10x-HAL/drivers/board.c

@@ -47,6 +47,7 @@ void HAL_MspInit(void)
     __HAL_AFIO_REMAP_SWJ_NOJTAG();
 }
 
+
 void SystemClock_Config(void)
 {
     rt_err_t ret = RT_EOK;
@@ -63,7 +64,19 @@ void SystemClock_Config(void)
     RCC_OscInitStruct.PLL.PLLSource  = RCC_PLLSOURCE_HSE;
     RCC_OscInitStruct.PLL.PLLMUL     = RCC_PLL_MUL9;
     ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
-    RT_ASSERT(ret == HAL_OK);
+    if(ret == HAL_TIMEOUT)
+    {
+        /* HSE timeout switch to HSI */
+        rt_memset(&RCC_OscInitStruct, 0, sizeof(RCC_OscInitStruct));
+        RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI;
+        RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
+        RCC_OscInitStruct.HSICalibrationValue = 16;
+        RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
+        RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI_DIV2;
+        RCC_OscInitStruct.PLL.PLLMUL          = RCC_PLL_MUL16;
+        ret = HAL_RCC_OscConfig(&RCC_OscInitStruct); 
+        RT_ASSERT(ret == HAL_OK);
+    }
     
     /* Initializes the CPU, AHB and APB busses clocks */
     RCC_ClkInitStruct.ClockType      = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | 
@@ -103,6 +116,38 @@ void SystemClock_Config(void)
 #endif
 }
 
+static void m3_m4_delay_us(rt_uint32_t us)
+{
+    int i = (HAL_RCC_GetHCLKFreq() / 4000000 * us);
+    while (i)
+    {
+        i--;
+    }
+}
+
+void HAL_Delay(__IO uint32_t Delay)
+{
+    m3_m4_delay_us(Delay * 10);
+}
+
+extern __IO uint32_t uwTick;
+uint32_t HAL_GetTick(void)
+{
+    HAL_Delay(1);
+    uwTick ++;
+    return uwTick;
+}
+
+void HAL_SuspendTick(void)
+{
+    /* we should not suspend tick */
+}
+
+void HAL_ResumeTick(void)
+{
+    /* we should not resume tick */
+}
+
 /**
  * This is the timer interrupt service routine.
  *
@@ -111,6 +156,7 @@ void SysTick_Handler(void)
 {
     /* enter interrupt */
     rt_interrupt_enter();
+
     HAL_IncTick();
     rt_tick_increase();
     /* leave interrupt */

bsp/stm32f10x-HAL/template.uvprojx

@@ -14,16 +14,16 @@
       <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
-          <Device>STM32F103RB</Device>
+          <Device>STM32F103RC</Device>
           <Vendor>STMicroelectronics</Vendor>
           <PackID>Keil.STM32F1xx_DFP.2.2.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
-          <Cpu>IRAM(0x20000000,0x5000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
+          <Cpu>IRAM(0x20000000,0xC000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
-          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM))</FlashDriverDll>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM))</FlashDriverDll>
           <DeviceId>0</DeviceId>
-          <RegisterFile>$$Device:STM32F103RB$Device\Include\stm32f10x.h</RegisterFile>
+          <RegisterFile>$$Device:STM32F103RC$Device\Include\stm32f10x.h</RegisterFile>
           <MemoryEnv></MemoryEnv>
           <Cmp></Cmp>
           <Asm></Asm>
@@ -33,7 +33,7 @@
           <SLE66CMisc></SLE66CMisc>
           <SLE66AMisc></SLE66AMisc>
           <SLE66LinkerMisc></SLE66LinkerMisc>
-          <SFDFile>$$Device:STM32F103RB$SVD\STM32F103xx.svd</SFDFile>
+          <SFDFile>$$Device:STM32F103RC$SVD\STM32F103xx.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
           <BinPath></BinPath>
@@ -111,8 +111,8 @@
         <DllOption>
           <SimDllName>SARMCM3.DLL</SimDllName>
           <SimDllArguments> -REMAP</SimDllArguments>
-          <SimDlgDll>DCM.DLL</SimDlgDll>
-          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <SimDlgDll>DARMSTM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pSTM32F103RC</SimDlgDllArguments>
           <TargetDllName>SARMCM3.DLL</TargetDllName>
           <TargetDllArguments></TargetDllArguments>
           <TargetDlgDll>TCM.DLL</TargetDlgDll>
@@ -138,7 +138,7 @@
           </Flash1>
           <bUseTDR>1</bUseTDR>
           <Flash2>BIN\UL2CM3.DLL</Flash2>
-          <Flash3>"" ()</Flash3>
+          <Flash3></Flash3>
           <Flash4></Flash4>
           <pFcarmOut></pFcarmOut>
           <pFcarmGrp></pFcarmGrp>
@@ -244,12 +244,12 @@
               <IRAM>
                 <Type>0</Type>
                 <StartAddress>0x20000000</StartAddress>
-                <Size>0x5000</Size>
+                <Size>0xc000</Size>
               </IRAM>
               <IROM>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x20000</Size>
+                <Size>0x40000</Size>
               </IROM>
               <XRAM>
                 <Type>0</Type>
@@ -274,7 +274,7 @@
               <OCR_RVCT4>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x20000</Size>
+                <Size>0x40000</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>
                 <Type>1</Type>
@@ -299,7 +299,7 @@
               <OCR_RVCT9>
                 <Type>0</Type>
                 <StartAddress>0x20000000</StartAddress>
-                <Size>0x5000</Size>
+                <Size>0xc000</Size>
               </OCR_RVCT9>
               <OCR_RVCT10>
                 <Type>0</Type>
@@ -324,6 +324,7 @@
             <uThumb>0</uThumb>
             <uSurpInc>0</uSurpInc>
             <uC99>1</uC99>
+            <uGnu>0</uGnu>
             <useXO>0</useXO>
             <v6Lang>1</v6Lang>
             <v6LangP>1</v6LangP>