[bsp][lpc55sxx]update: update keil default project

1.update keil default project
2.add rtduino aht10 demo

bsp/lpc55sxx/lpc55s06_nxp_evk/.config

@@ -10,6 +10,7 @@ CONFIG_SOC_LPC55S06=y
 CONFIG_RT_NAME_MAX=8
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 # CONFIG_RT_USING_SMART is not set
+# CONFIG_RT_USING_AMP is not set
 # CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=8
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
@@ -60,7 +61,6 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
 #
 # Memory Management
 #
-CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -84,7 +84,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x50000
+CONFIG_RT_VER_NUM=0x50001
 # CONFIG_RT_USING_STDC_ATOMIC is not set
 # CONFIG_RT_USING_CACHE is not set
 CONFIG_RT_USING_HW_ATOMIC=y
@@ -120,6 +120,10 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
+
+#
+# DFS: device virtual file system
+#
 # CONFIG_RT_USING_DFS is not set
 # CONFIG_RT_USING_FAL is not set
 
@@ -241,7 +245,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
@@ -512,6 +515,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_QPC is not set
 # CONFIG_PKG_USING_AGILE_UPGRADE is not set
 # CONFIG_PKG_USING_FLASH_BLOB is not set
+# CONFIG_PKG_USING_MLIBC is not set
 
 #
 # peripheral libraries and drivers
@@ -596,6 +600,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FT5426 is not set
 # CONFIG_PKG_USING_FT6236 is not set
 # CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# CONFIG_PKG_USING_CST816X is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -608,7 +613,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LKDGUI is not set
 # CONFIG_PKG_USING_NRF5X_SDK is not set
 # CONFIG_PKG_USING_NRFX is not set
-# CONFIG_PKG_USING_WM_LIBRARIES is not set
 
 #
 # Kendryte SDK
@@ -666,14 +670,17 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MISAKA_AT24CXX is not set
 # CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
 # CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
-# CONFIG_PKG_USING_BL_MCU_SDK is not set
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_RFM300 is not set
 # CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
 # CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_AIP650 is not set
 # CONFIG_PKG_USING_FINGERPRINT is not set
+# CONFIG_PKG_USING_BT_ECB02C is not set
+# CONFIG_PKG_USING_UAT is not set
+# CONFIG_PKG_USING_SPI_TOOLS is not set
 
 #
 # AI packages
@@ -692,7 +699,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # Signal Processing and Control Algorithm Packages
 #
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_KISSFFT is not set
 
 #
 # miscellaneous packages
@@ -739,7 +749,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
-# CONFIG_PKG_USING_DIGITALCTRL is not set
 # CONFIG_PKG_USING_UPACKER is not set
 # CONFIG_PKG_USING_UPARAM is not set
 # CONFIG_PKG_USING_HELLO is not set
@@ -764,8 +773,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RTDUINO is not set
 
 #
-# Projects
+# Projects and Demos
 #
+# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
 # CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
 # CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@@ -912,14 +922,19 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Display
 #
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
 # CONFIG_PKG_USING_ARDUINO_U8G2 is not set
-# CONFIG_PKG_USING_ARDUINO_U8GLIB_ARDUINO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
 # CONFIG_PKG_USING_SEEED_TM1637 is not set
 
 #
 # Timing
 #
 # CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# CONFIG_PKG_USING_ARDUINO_TICKER is not set
+# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
 
 #
 # Data Processing
@@ -998,8 +1013,6 @@ CONFIG_HW_UART0_BAUDRATE_115200=y
 #
 # Onboard Peripheral Drivers
 #
-CONFIG_BSP_USING_LED=y
-CONFIG_BSP_USING_KEY=y
 # CONFIG_BSP_USING_MMA8562 is not set
 
 #

bsp/lpc55sxx/lpc55s06_nxp_evk/project.uvprojx

@@ -336,7 +336,7 @@
               <MiscControls>--target=arm-arm-none-eabi</MiscControls>
               <Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, __RTTHREAD__, DEBUG</Define>
               <Undefine />
-              <IncludePath>..\Libraries\LPC55S06\LPC55S06\drivers;..\..\..\components\libc\compilers\common\extension;..\..\..\components\drivers\include;..\..\..\include;..\Libraries\LPC55S06\middleware\sdmmc\port;..\Libraries\CMSIS\Core\Include;..\..\..\components\finsh;..\..\..\components\drivers\include;..\Libraries\drivers\config;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\Libraries\LPC55S06\LPC55S06;..\..\..\components\libc\posix\io\stdio;..\Libraries\drivers;..\..\..\libcpu\arm\cortex-m33;board\MCUX_Config\board;..\..\..\components\drivers\include;..\..\..\libcpu\arm\common;..\Libraries\LPC55S06\components\codec;..\..\..\components\libc\posix\ipc;applications;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\compilers\common\include;board;.</IncludePath>
+              <IncludePath>..\..\..\libcpu\arm\common;..\Libraries\LPC55S06\middleware\sdmmc\port;..\..\..\components\libc\posix\io\stdio;..\Libraries\LPC55S06\LPC55S06;.;..\..\..\components\drivers\include;..\..\..\libcpu\arm\cortex-m33;board\MCUX_Config\board;..\..\..\include;..\Libraries\LPC55S06\components\codec;..\Libraries\LPC55S06\LPC55S06\drivers;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\ipc;..\..\..\components\drivers\include;board;..\..\..\components\libc\compilers\common\extension;..\Libraries\drivers;applications;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\compilers\common\include;..\..\..\components\finsh;..\Libraries\CMSIS\Core\Include;..\..\..\components\drivers\include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -587,20 +587,6 @@
               <FilePath>board\board.c</FilePath>
             </File>
           </Files>
-          <Files>
-            <File>
-              <FileName>drv_key.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_key.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>drv_led.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_led.c</FilePath>
-            </File>
-          </Files>
           <Files>
             <File>
               <FileName>drv_pin.c</FileName>

bsp/lpc55sxx/lpc55s06_nxp_evk/rtconfig.h

@@ -37,7 +37,6 @@
 
 /* Memory Management */
 
-#define RT_PAGE_MAX_ORDER 11
 #define RT_USING_MEMPOOL
 #define RT_USING_SMALL_MEM
 #define RT_USING_SMALL_MEM_AS_HEAP
@@ -49,7 +48,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart0"
-#define RT_VER_NUM 0x50000
+#define RT_VER_NUM 0x50001
 #define RT_USING_HW_ATOMIC
 #define RT_USING_CPU_FFS
 #define ARCH_ARM
@@ -78,6 +77,9 @@
 #define FINSH_USING_DESCRIPTION
 #define FINSH_ARG_MAX 10
 
+/* DFS: device virtual file system */
+
+
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
@@ -195,7 +197,7 @@
 /* Arduino libraries */
 
 
-/* Projects */
+/* Projects and Demos */
 
 
 /* Sensors */
@@ -239,8 +241,6 @@
 
 /* Onboard Peripheral Drivers */
 
-#define BSP_USING_LED
-#define BSP_USING_KEY
 
 /* Board extended module Drivers */
 

bsp/lpc55sxx/lpc55s16_nxp_evk/.config

@@ -10,6 +10,7 @@ CONFIG_SOC_LPC55S16=y
 CONFIG_RT_NAME_MAX=8
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 # CONFIG_RT_USING_SMART is not set
+# CONFIG_RT_USING_AMP is not set
 # CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=8
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
@@ -60,7 +61,6 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
 #
 # Memory Management
 #
-CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -84,7 +84,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x50000
+CONFIG_RT_VER_NUM=0x50001
 # CONFIG_RT_USING_STDC_ATOMIC is not set
 # CONFIG_RT_USING_CACHE is not set
 CONFIG_RT_USING_HW_ATOMIC=y
@@ -119,6 +119,10 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
+
+#
+# DFS: device virtual file system
+#
 # CONFIG_RT_USING_DFS is not set
 # CONFIG_RT_USING_FAL is not set
 
@@ -240,7 +244,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
@@ -511,6 +514,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_QPC is not set
 # CONFIG_PKG_USING_AGILE_UPGRADE is not set
 # CONFIG_PKG_USING_FLASH_BLOB is not set
+# CONFIG_PKG_USING_MLIBC is not set
 
 #
 # peripheral libraries and drivers
@@ -595,6 +599,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FT5426 is not set
 # CONFIG_PKG_USING_FT6236 is not set
 # CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# CONFIG_PKG_USING_CST816X is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -607,7 +612,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LKDGUI is not set
 # CONFIG_PKG_USING_NRF5X_SDK is not set
 # CONFIG_PKG_USING_NRFX is not set
-# CONFIG_PKG_USING_WM_LIBRARIES is not set
 
 #
 # Kendryte SDK
@@ -665,14 +669,17 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MISAKA_AT24CXX is not set
 # CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
 # CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
-# CONFIG_PKG_USING_BL_MCU_SDK is not set
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_RFM300 is not set
 # CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
 # CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_AIP650 is not set
 # CONFIG_PKG_USING_FINGERPRINT is not set
+# CONFIG_PKG_USING_BT_ECB02C is not set
+# CONFIG_PKG_USING_UAT is not set
+# CONFIG_PKG_USING_SPI_TOOLS is not set
 
 #
 # AI packages
@@ -691,7 +698,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # Signal Processing and Control Algorithm Packages
 #
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_KISSFFT is not set
 
 #
 # miscellaneous packages
@@ -738,7 +748,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
-# CONFIG_PKG_USING_DIGITALCTRL is not set
 # CONFIG_PKG_USING_UPACKER is not set
 # CONFIG_PKG_USING_UPARAM is not set
 # CONFIG_PKG_USING_HELLO is not set
@@ -763,8 +772,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RTDUINO is not set
 
 #
-# Projects
+# Projects and Demos
 #
+# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
 # CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
 # CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@@ -911,14 +921,19 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Display
 #
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
 # CONFIG_PKG_USING_ARDUINO_U8G2 is not set
-# CONFIG_PKG_USING_ARDUINO_U8GLIB_ARDUINO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
 # CONFIG_PKG_USING_SEEED_TM1637 is not set
 
 #
 # Timing
 #
 # CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# CONFIG_PKG_USING_ARDUINO_TICKER is not set
+# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
 
 #
 # Data Processing
@@ -996,8 +1011,6 @@ CONFIG_HW_UART0_BAUDRATE_115200=y
 #
 # Onboard Peripheral Drivers
 #
-CONFIG_BSP_USING_LED=y
-CONFIG_BSP_USING_KEY=y
 # CONFIG_BSP_USING_MMA8562 is not set
 
 #

bsp/lpc55sxx/lpc55s16_nxp_evk/project.uvprojx

@@ -336,7 +336,7 @@
               <MiscControls>--target=arm-arm-none-eabi</MiscControls>
               <Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, __RTTHREAD__, DEBUG</Define>
               <Undefine />
-              <IncludePath>..\Libraries\CMSIS\Core\Include;..\..\..\components\libc\compilers\common\extension;..\..\..\components\drivers\include;..\..\..\include;..\..\..\components\finsh;..\..\..\components\drivers\include;board\MCUX_Config\board;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\io\stdio;..\Libraries\LPC55S16\LPC55S16;..\Libraries\LPC55S16\middleware\sdmmc\inc;..\Libraries\LPC55S16\LPC55S16\drivers;..\..\..\components\libc\posix\io\poll;..\Libraries\drivers;..\..\..\libcpu\arm\cortex-m33;.;..\Libraries\LPC55S16\components\codec;..\..\..\components\drivers\include;..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\ipc;applications;..\Libraries\drivers\config;..\..\..\components\libc\compilers\common\include;board;..\Libraries\LPC55S16\middleware\sdmmc\port</IncludePath>
+              <IncludePath>..\..\..\libcpu\arm\common;.;..\..\..\components\libc\posix\io\stdio;..\Libraries\LPC55S16\LPC55S16\drivers;..\..\..\components\drivers\include;..\Libraries\LPC55S16\middleware\sdmmc\inc;..\..\..\libcpu\arm\cortex-m33;board\MCUX_Config\board;..\..\..\components\libc\compilers\common\extension;..\..\..\include;..\Libraries\CMSIS\Core\Include;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\ipc;..\..\..\components\libc\posix\io\poll;..\..\..\components\drivers\include;..\Libraries\drivers;..\Libraries\LPC55S16\LPC55S16;..\Libraries\LPC55S16\components\codec;..\..\..\components\libc\compilers\common\include;..\..\..\components\finsh;board;..\..\..\components\drivers\include;applications;..\Libraries\LPC55S16\middleware\sdmmc\port</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -587,20 +587,6 @@
               <FilePath>board\board.c</FilePath>
             </File>
           </Files>
-          <Files>
-            <File>
-              <FileName>drv_key.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_key.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>drv_led.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_led.c</FilePath>
-            </File>
-          </Files>
           <Files>
             <File>
               <FileName>drv_pin.c</FileName>

bsp/lpc55sxx/lpc55s16_nxp_evk/rtconfig.h

@@ -37,7 +37,6 @@
 
 /* Memory Management */
 
-#define RT_PAGE_MAX_ORDER 11
 #define RT_USING_MEMPOOL
 #define RT_USING_SMALL_MEM
 #define RT_USING_SMALL_MEM_AS_HEAP
@@ -49,7 +48,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart0"
-#define RT_VER_NUM 0x50000
+#define RT_VER_NUM 0x50001
 #define RT_USING_HW_ATOMIC
 #define RT_USING_CPU_FFS
 #define ARCH_ARM
@@ -77,6 +76,9 @@
 #define FINSH_USING_DESCRIPTION
 #define FINSH_ARG_MAX 10
 
+/* DFS: device virtual file system */
+
+
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
@@ -194,7 +196,7 @@
 /* Arduino libraries */
 
 
-/* Projects */
+/* Projects and Demos */
 
 
 /* Sensors */
@@ -236,8 +238,6 @@
 
 /* Onboard Peripheral Drivers */
 
-#define BSP_USING_LED
-#define BSP_USING_KEY
 
 /* Board extended module Drivers */
 

bsp/lpc55sxx/lpc55s28_nxp_evk/.config

@@ -10,6 +10,7 @@ CONFIG_SOC_LPC55S28=y
 CONFIG_RT_NAME_MAX=8
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 # CONFIG_RT_USING_SMART is not set
+# CONFIG_RT_USING_AMP is not set
 # CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=8
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
@@ -60,7 +61,6 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
 #
 # Memory Management
 #
-CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -84,7 +84,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x50000
+CONFIG_RT_VER_NUM=0x50001
 # CONFIG_RT_USING_STDC_ATOMIC is not set
 # CONFIG_RT_USING_CACHE is not set
 CONFIG_RT_USING_HW_ATOMIC=y
@@ -120,6 +120,10 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
+
+#
+# DFS: device virtual file system
+#
 # CONFIG_RT_USING_DFS is not set
 # CONFIG_RT_USING_FAL is not set
 
@@ -241,7 +245,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
@@ -512,6 +515,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_QPC is not set
 # CONFIG_PKG_USING_AGILE_UPGRADE is not set
 # CONFIG_PKG_USING_FLASH_BLOB is not set
+# CONFIG_PKG_USING_MLIBC is not set
 
 #
 # peripheral libraries and drivers
@@ -596,6 +600,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FT5426 is not set
 # CONFIG_PKG_USING_FT6236 is not set
 # CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# CONFIG_PKG_USING_CST816X is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -608,7 +613,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LKDGUI is not set
 # CONFIG_PKG_USING_NRF5X_SDK is not set
 # CONFIG_PKG_USING_NRFX is not set
-# CONFIG_PKG_USING_WM_LIBRARIES is not set
 
 #
 # Kendryte SDK
@@ -666,14 +670,17 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MISAKA_AT24CXX is not set
 # CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
 # CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
-# CONFIG_PKG_USING_BL_MCU_SDK is not set
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_RFM300 is not set
 # CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
 # CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_AIP650 is not set
 # CONFIG_PKG_USING_FINGERPRINT is not set
+# CONFIG_PKG_USING_BT_ECB02C is not set
+# CONFIG_PKG_USING_UAT is not set
+# CONFIG_PKG_USING_SPI_TOOLS is not set
 
 #
 # AI packages
@@ -692,7 +699,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # Signal Processing and Control Algorithm Packages
 #
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_KISSFFT is not set
 
 #
 # miscellaneous packages
@@ -739,7 +749,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
-# CONFIG_PKG_USING_DIGITALCTRL is not set
 # CONFIG_PKG_USING_UPACKER is not set
 # CONFIG_PKG_USING_UPARAM is not set
 # CONFIG_PKG_USING_HELLO is not set
@@ -764,8 +773,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RTDUINO is not set
 
 #
-# Projects
+# Projects and Demos
 #
+# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
 # CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
 # CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@@ -912,14 +922,19 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Display
 #
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
 # CONFIG_PKG_USING_ARDUINO_U8G2 is not set
-# CONFIG_PKG_USING_ARDUINO_U8GLIB_ARDUINO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
 # CONFIG_PKG_USING_SEEED_TM1637 is not set
 
 #
 # Timing
 #
 # CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# CONFIG_PKG_USING_ARDUINO_TICKER is not set
+# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
 
 #
 # Data Processing
@@ -998,8 +1013,6 @@ CONFIG_HW_UART0_BAUDRATE_115200=y
 #
 # Onboard Peripheral Drivers
 #
-CONFIG_BSP_USING_LED=y
-CONFIG_BSP_USING_KEY=y
 # CONFIG_BSP_USING_MMA8562 is not set
 
 #

bsp/lpc55sxx/lpc55s28_nxp_evk/project.uvprojx

@@ -336,7 +336,7 @@
               <MiscControls>--target=arm-arm-none-eabi</MiscControls>
               <Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, __RTTHREAD__, DEBUG</Define>
               <Undefine />
-              <IncludePath>..\..\..\components\libc\compilers\common\extension;..\..\..\components\drivers\include;..\..\..\include;..\..\..\components\finsh;..\..\..\components\drivers\include;..\..\..\components\libc\compilers\common\extension\fcntl\octal;.;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\io\poll;..\Libraries\LPC55S28\LPC55S28\drivers;..\Libraries\LPC55S28\components\codec;..\..\..\libcpu\arm\cortex-m33;..\Libraries\LPC55S28\LPC55S28;board;..\Libraries\LPC55S28\middleware\sdmmc\inc;..\Libraries\CMSIS\Core\Include;..\..\..\components\drivers\include;..\Libraries\LPC55S28\middleware\sdmmc\port;..\..\..\libcpu\arm\common;..\Libraries\drivers;..\..\..\components\libc\posix\ipc;..\Libraries\drivers\config;..\..\..\components\libc\compilers\common\include;board\MCUX_Config\board;applications</IncludePath>
+              <IncludePath>..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\io\stdio;.;board;..\Libraries\LPC55S28\middleware\sdmmc\inc;..\..\..\components\drivers\include;..\..\..\libcpu\arm\cortex-m33;board\MCUX_Config\board;applications;..\..\..\include;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\Libraries\LPC55S28\components\codec;..\Libraries\CMSIS\Core\Include;..\..\..\components\libc\posix\ipc;..\Libraries\LPC55S28\LPC55S28\drivers;..\Libraries\LPC55S28\middleware\sdmmc\port;..\..\..\components\libc\compilers\common\extension;..\Libraries\LPC55S28\LPC55S28;..\Libraries\drivers;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\compilers\common\include;..\..\..\components\finsh;..\..\..\components\drivers\include;..\..\..\components\drivers\include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -587,20 +587,6 @@
               <FilePath>board\board.c</FilePath>
             </File>
           </Files>
-          <Files>
-            <File>
-              <FileName>drv_key.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_key.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>drv_led.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_led.c</FilePath>
-            </File>
-          </Files>
           <Files>
             <File>
               <FileName>drv_pin.c</FileName>

bsp/lpc55sxx/lpc55s28_nxp_evk/rtconfig.h

@@ -37,7 +37,6 @@
 
 /* Memory Management */
 
-#define RT_PAGE_MAX_ORDER 11
 #define RT_USING_MEMPOOL
 #define RT_USING_SMALL_MEM
 #define RT_USING_SMALL_MEM_AS_HEAP
@@ -49,7 +48,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart0"
-#define RT_VER_NUM 0x50000
+#define RT_VER_NUM 0x50001
 #define RT_USING_HW_ATOMIC
 #define RT_USING_CPU_FFS
 #define ARCH_ARM
@@ -78,6 +77,9 @@
 #define FINSH_USING_DESCRIPTION
 #define FINSH_ARG_MAX 10
 
+/* DFS: device virtual file system */
+
+
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
@@ -195,7 +197,7 @@
 /* Arduino libraries */
 
 
-/* Projects */
+/* Projects and Demos */
 
 
 /* Sensors */
@@ -239,8 +241,6 @@
 
 /* Onboard Peripheral Drivers */
 
-#define BSP_USING_LED
-#define BSP_USING_KEY
 
 /* Board extended module Drivers */
 

bsp/lpc55sxx/lpc55s36_nxp_evk/.config

@@ -10,6 +10,7 @@ CONFIG_SOC_LPC55S36=y
 CONFIG_RT_NAME_MAX=8
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 # CONFIG_RT_USING_SMART is not set
+# CONFIG_RT_USING_AMP is not set
 # CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=8
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
@@ -60,7 +61,6 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
 #
 # Memory Management
 #
-CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -84,7 +84,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x50000
+CONFIG_RT_VER_NUM=0x50001
 # CONFIG_RT_USING_STDC_ATOMIC is not set
 # CONFIG_RT_USING_CACHE is not set
 CONFIG_RT_USING_HW_ATOMIC=y
@@ -119,6 +119,10 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
+
+#
+# DFS: device virtual file system
+#
 # CONFIG_RT_USING_DFS is not set
 # CONFIG_RT_USING_FAL is not set
 
@@ -240,7 +244,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
@@ -511,6 +514,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_QPC is not set
 # CONFIG_PKG_USING_AGILE_UPGRADE is not set
 # CONFIG_PKG_USING_FLASH_BLOB is not set
+# CONFIG_PKG_USING_MLIBC is not set
 
 #
 # peripheral libraries and drivers
@@ -595,6 +599,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FT5426 is not set
 # CONFIG_PKG_USING_FT6236 is not set
 # CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# CONFIG_PKG_USING_CST816X is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -607,7 +612,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LKDGUI is not set
 # CONFIG_PKG_USING_NRF5X_SDK is not set
 # CONFIG_PKG_USING_NRFX is not set
-# CONFIG_PKG_USING_WM_LIBRARIES is not set
 
 #
 # Kendryte SDK
@@ -665,14 +669,17 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MISAKA_AT24CXX is not set
 # CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
 # CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
-# CONFIG_PKG_USING_BL_MCU_SDK is not set
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_RFM300 is not set
 # CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
 # CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_AIP650 is not set
 # CONFIG_PKG_USING_FINGERPRINT is not set
+# CONFIG_PKG_USING_BT_ECB02C is not set
+# CONFIG_PKG_USING_UAT is not set
+# CONFIG_PKG_USING_SPI_TOOLS is not set
 
 #
 # AI packages
@@ -691,7 +698,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # Signal Processing and Control Algorithm Packages
 #
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_KISSFFT is not set
 
 #
 # miscellaneous packages
@@ -738,7 +748,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
-# CONFIG_PKG_USING_DIGITALCTRL is not set
 # CONFIG_PKG_USING_UPACKER is not set
 # CONFIG_PKG_USING_UPARAM is not set
 # CONFIG_PKG_USING_HELLO is not set
@@ -763,8 +772,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RTDUINO is not set
 
 #
-# Projects
+# Projects and Demos
 #
+# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
 # CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
 # CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@@ -911,14 +921,19 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Display
 #
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
 # CONFIG_PKG_USING_ARDUINO_U8G2 is not set
-# CONFIG_PKG_USING_ARDUINO_U8GLIB_ARDUINO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
 # CONFIG_PKG_USING_SEEED_TM1637 is not set
 
 #
 # Timing
 #
 # CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# CONFIG_PKG_USING_ARDUINO_TICKER is not set
+# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
 
 #
 # Data Processing
@@ -996,8 +1011,6 @@ CONFIG_HW_UART0_BAUDRATE_115200=y
 #
 # Onboard Peripheral Drivers
 #
-CONFIG_BSP_USING_LED=y
-CONFIG_BSP_USING_KEY=y
 # CONFIG_BSP_USING_MMA8562 is not set
 
 #

bsp/lpc55sxx/lpc55s36_nxp_evk/project.uvprojx

@@ -336,7 +336,7 @@
               <MiscControls>--target=arm-arm-none-eabi</MiscControls>
               <Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, __RTTHREAD__, DEBUG</Define>
               <Undefine />
-              <IncludePath>..\..\..\components\libc\compilers\common\extension;..\..\..\components\drivers\include;..\..\..\include;..\Libraries\LPC55S36\LPC55S36;..\..\..\components\finsh;..\..\..\components\drivers\include;..\Libraries\drivers\config;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\io\stdio;board\MCUX_Config\board;.;..\..\..\components\libc\posix\io\poll;..\Libraries\drivers;..\..\..\libcpu\arm\cortex-m33;..\Libraries\LPC55S36\middleware\sdmmc\port;..\Libraries\LPC55S36\middleware\sdmmc\inc;..\..\..\components\drivers\include;..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\ipc;..\Libraries\LPC55S36\LPC55S36\drivers;..\..\..\components\libc\compilers\common\include;applications;..\Libraries\LPC55S36\components\codec;board;..\Libraries\CMSIS\Core\Include</IncludePath>
+              <IncludePath>..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\io\stdio;..\Libraries\LPC55S36\LPC55S36;.;..\..\..\components\drivers\include;..\..\..\libcpu\arm\cortex-m33;board;board\MCUX_Config\board;..\..\..\include;..\Libraries\LPC55S36\middleware\sdmmc\inc;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\ipc;..\Libraries\LPC55S36\LPC55S36\drivers;..\..\..\components\libc\compilers\common\extension;..\Libraries\LPC55S36\middleware\sdmmc\port;..\Libraries\LPC55S36\components\codec;..\Libraries\CMSIS\Core\Include;..\Libraries\drivers;..\..\..\components\libc\posix\io\poll;applications;..\..\..\components\libc\compilers\common\include;..\..\..\components\finsh;..\..\..\components\drivers\include;..\..\..\components\drivers\include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -587,20 +587,6 @@
               <FilePath>board\board.c</FilePath>
             </File>
           </Files>
-          <Files>
-            <File>
-              <FileName>drv_key.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_key.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>drv_led.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_led.c</FilePath>
-            </File>
-          </Files>
           <Files>
             <File>
               <FileName>drv_pin.c</FileName>

bsp/lpc55sxx/lpc55s36_nxp_evk/rtconfig.h

@@ -37,7 +37,6 @@
 
 /* Memory Management */
 
-#define RT_PAGE_MAX_ORDER 11
 #define RT_USING_MEMPOOL
 #define RT_USING_SMALL_MEM
 #define RT_USING_SMALL_MEM_AS_HEAP
@@ -49,7 +48,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart0"
-#define RT_VER_NUM 0x50000
+#define RT_VER_NUM 0x50001
 #define RT_USING_HW_ATOMIC
 #define RT_USING_CPU_FFS
 #define ARCH_ARM
@@ -77,6 +76,9 @@
 #define FINSH_USING_DESCRIPTION
 #define FINSH_ARG_MAX 10
 
+/* DFS: device virtual file system */
+
+
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
@@ -194,7 +196,7 @@
 /* Arduino libraries */
 
 
-/* Projects */
+/* Projects and Demos */
 
 
 /* Sensors */
@@ -236,8 +238,6 @@
 
 /* Onboard Peripheral Drivers */
 
-#define BSP_USING_LED
-#define BSP_USING_KEY
 
 /* Board extended module Drivers */
 

bsp/lpc55sxx/lpc55s69_nxp_evk/.config

@@ -10,6 +10,7 @@ CONFIG_SOC_LPC55S69=y
 CONFIG_RT_NAME_MAX=8
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 # CONFIG_RT_USING_SMART is not set
+# CONFIG_RT_USING_AMP is not set
 # CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=8
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
@@ -61,7 +62,6 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
 #
 # Memory Management
 #
-CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -245,7 +245,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
@@ -516,6 +515,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_QPC is not set
 # CONFIG_PKG_USING_AGILE_UPGRADE is not set
 # CONFIG_PKG_USING_FLASH_BLOB is not set
+# CONFIG_PKG_USING_MLIBC is not set
 
 #
 # peripheral libraries and drivers
@@ -600,6 +600,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FT5426 is not set
 # CONFIG_PKG_USING_FT6236 is not set
 # CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# CONFIG_PKG_USING_CST816X is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -675,7 +676,11 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
 # CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_AIP650 is not set
 # CONFIG_PKG_USING_FINGERPRINT is not set
+# CONFIG_PKG_USING_BT_ECB02C is not set
+# CONFIG_PKG_USING_UAT is not set
+# CONFIG_PKG_USING_SPI_TOOLS is not set
 
 #
 # AI packages
@@ -694,7 +699,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # Signal Processing and Control Algorithm Packages
 #
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_KISSFFT is not set
 
 #
 # miscellaneous packages
@@ -741,7 +749,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
-# CONFIG_PKG_USING_DIGITALCTRL is not set
 # CONFIG_PKG_USING_UPACKER is not set
 # CONFIG_PKG_USING_UPARAM is not set
 # CONFIG_PKG_USING_HELLO is not set
@@ -766,8 +773,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RTDUINO is not set
 
 #
-# Projects
+# Projects and Demos
 #
+# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
 # CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
 # CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@@ -914,14 +922,19 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Display
 #
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
 # CONFIG_PKG_USING_ARDUINO_U8G2 is not set
-# CONFIG_PKG_USING_ARDUINO_U8GLIB_ARDUINO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
 # CONFIG_PKG_USING_SEEED_TM1637 is not set
 
 #
 # Timing
 #
 # CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# CONFIG_PKG_USING_ARDUINO_TICKER is not set
+# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
 
 #
 # Data Processing
@@ -990,7 +1003,9 @@ CONFIG_HW_UART0_BAUDRATE_115200=y
 # CONFIG_BSP_USING_UART1 is not set
 # CONFIG_BSP_USING_UART2 is not set
 # CONFIG_BSP_USING_I2C is not set
+# CONFIG_BSP_USING_SOFT_I2C is not set
 # CONFIG_BSP_USING_SPI is not set
+# CONFIG_BSP_USING_SOFT_SPI is not set
 # CONFIG_BSP_USING_ADC is not set
 # CONFIG_BSP_USING_SDIO is not set
 # CONFIG_BSP_USING_RTC is not set
@@ -1001,11 +1016,13 @@ CONFIG_HW_UART0_BAUDRATE_115200=y
 #
 # Onboard Peripheral Drivers
 #
-CONFIG_BSP_USING_LED=y
-CONFIG_BSP_USING_KEY=y
 # CONFIG_BSP_USING_MMA8562 is not set
 # CONFIG_BSP_USING_ARDUINO is not set
 
 #
 # Board extended module Drivers
 #
+# CONFIG_BSP_USING_NXP_LCDM_S is not set
+# CONFIG_BSP_USING_LCD is not set
+# CONFIG_BSP_USING_TOUCH is not set
+# CONFIG_BSP_USING_LVGL is not set

bsp/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig

@@ -339,6 +339,21 @@ menu "Onboard Peripheral Drivers"
         imply RTDUINO_USING_WIRE
         default n
 
+    if BSP_USING_ARDUINO
+        config BSP_USING_ARDUINO_AHT10
+            bool "Enable Arduino AHT10 sensor library"
+            select BSP_USING_I2C1
+            select PKG_USING_ARDUINO_ADAFRUIT_AHTX0
+            depends on !BSP_USING_AHT10
+            default n
+
+        config BSP_USING_ARDUINO_AHT10_DEMO
+            bool "Enable Arduino AHT10 sensor library demo"
+            select PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO
+            depends on BSP_USING_ARDUINO_AHT10
+            default n
+    endif
+
 endmenu
 
 menu "Board extended module Drivers"

bsp/lpc55sxx/lpc55s69_nxp_evk/project.uvprojx

@@ -10,13 +10,13 @@
       <TargetName>rtthread-lpc55s6x</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>6190000::V6.19::ARMCLANG</pCCUsed>
+      <pCCUsed>6160000::V6.16::ARMCLANG</pCCUsed>
       <uAC6>1</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>LPC55S69JBD100:cm33_core0</Device>
           <Vendor>NXP</Vendor>
-          <PackID>NXP.LPC55S69_DFP.14.0.0</PackID>
+          <PackID>NXP.LPC55S69_DFP.15.0.0</PackID>
           <PackURL>https://mcuxpresso.nxp.com/cmsis_pack/repo/</PackURL>
           <Cpu>IRAM(0x20000000,0x044000) IRAM2(0x04000000,0x8000) IROM(0x00000000,0x098000) XRAM(0x40100000,0x4000) CPUTYPE("Cortex-M33") FPU3(SFPU) DSP TZ CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
@@ -186,7 +186,6 @@
             <RvdsVP>2</RvdsVP>
             <RvdsMve>0</RvdsMve>
             <RvdsCdeCp>0</RvdsCdeCp>
-            <nBranchProt>0</nBranchProt>
             <hadIRAM2>1</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
@@ -338,9 +337,9 @@
             <v6Rtti>0</v6Rtti>
             <VariousControls>
               <MiscControls>--target=arm-arm-none-eabi</MiscControls>
-              <Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, __RTTHREAD__, DEBUG</Define>
+              <Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, __RTTHREAD__, CPU_LPC55S69JBD100_cm33_core0, DEBUG</Define>
               <Undefine></Undefine>
-              <IncludePath>..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\compilers\common\include;applications;..\Libraries\LPC55S6X\components\codec;board;..\Libraries\drivers\config;..\..\..\components\libc\compilers\common\extension;..\..\..\components\drivers\include;..\..\..\libcpu\arm\common;..\Libraries\LPC55S6X\middleware\sdmmc\port;..\Libraries\drivers;board\MCUX_Config\board;..\Libraries\LPC55S6X\middleware\sdmmc\inc;..\..\..\components\drivers\include;..\..\..\libcpu\arm\cortex-m33;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\Libraries\CMSIS\Core\Include;..\Libraries\LPC55S6X\LPC55S6X;..\..\..\include;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc;..\..\..\components\finsh;..\Libraries\LPC55S6X\LPC55S6X\drivers;.;..\..\..\components\drivers\include</IncludePath>
+              <IncludePath>..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\io\stdio;..\Libraries\LPC55S6X\middleware\sdmmc\inc;..\..\..\components\drivers\include;..\..\..\components\libc\compilers\common\extension;..\..\..\libcpu\arm\cortex-m33;board;..\..\..\include;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\ipc;..\Libraries\LPC55S6X\LPC55S6X;applications;..\..\..\components\libc\posix\io\poll;board\MCUX_Config\board;..\Libraries\LPC55S6X\LPC55S6X\drivers;..\Libraries\drivers;.;..\..\..\components\libc\compilers\common\include;..\Libraries\LPC55S6X\components\codec;..\..\..\components\finsh;..\Libraries\CMSIS\Core\Include;..\Libraries\LPC55S6X\middleware\sdmmc\port;..\..\..\components\drivers\include;..\..\..\components\drivers\include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -544,16 +543,6 @@
               <FileType>1</FileType>
               <FilePath>board\board.c</FilePath>
             </File>
-            <File>
-              <FileName>drv_key.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_key.c</FilePath>
-            </File>
-            <File>
-              <FileName>drv_led.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Libraries\drivers\drv_led.c</FilePath>
-            </File>
             <File>
               <FileName>drv_pin.c</FileName>
               <FileType>1</FileType>
@@ -881,4 +870,19 @@
     <files/>
   </RTE>
 
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
 </Project>

bsp/lpc55sxx/lpc55s69_nxp_evk/rtconfig.h

@@ -38,7 +38,6 @@
 
 /* Memory Management */
 
-#define RT_PAGE_MAX_ORDER 11
 #define RT_USING_MEMPOOL
 #define RT_USING_SMALL_MEM
 #define RT_USING_SMALL_MEM_AS_HEAP
@@ -198,7 +197,7 @@
 /* Arduino libraries */
 
 
-/* Projects */
+/* Projects and Demos */
 
 
 /* Sensors */
@@ -242,8 +241,6 @@
 
 /* Onboard Peripheral Drivers */
 
-#define BSP_USING_LED
-#define BSP_USING_KEY
 
 /* Board extended module Drivers */