[bsp\fm33lc026] *增加gpio支持 *更新libraries\FM33LC0xx_FL_Driver FL库到V2.3.1 (#6175)

* [bsp\fm33lc026] *增加gpio支持 *更新libraries\FM33LC0xx_FL_Driver到2021年新版本

bsp/fm33lc026/applications/main.c

@@ -1,31 +1,30 @@
 /*
- * Copyright (c) 2006-2018, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
  * Change Logs:
  * Date           Author         Notes
  * 2021-08-27     Jiao           first version
+ * 2022-07-20     wudiyidashi    support gpio
  */
 
 #include <rtthread.h>
 #include "board.h"
 
-int main(void)
+#define LED1    GET_PIN(D, 4)
-{
+
-    FL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+int main(void)
+
+{
+        rt_pin_mode(LED1, PIN_MODE_OUTPUT);
+        rt_pin_write(LED1, PIN_HIGH);
 
-    FL_GPIO_SetOutputPin(GPIOD, FL_GPIO_PIN_4);
-    GPIO_InitStruct.pin = FL_GPIO_PIN_4;
-    GPIO_InitStruct.mode = FL_GPIO_MODE_OUTPUT;
-    GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
-    GPIO_InitStruct.pull = FL_DISABLE;
-    FL_GPIO_Init(GPIOD, &GPIO_InitStruct);
     while (1)
     {
-        FL_GPIO_SetOutputPin(GPIOD, FL_GPIO_PIN_4);
+        rt_pin_write(LED1, PIN_HIGH);
         rt_thread_mdelay(500);
-        FL_GPIO_ResetOutputPin(GPIOD, FL_GPIO_PIN_4);
+        rt_pin_write(LED1, PIN_LOW);
         rt_thread_mdelay(500);
     }
 

bsp/fm33lc026/board/Kconfig

@@ -9,6 +9,11 @@ config SOC_FM33LC0XX
 
 menu "On-chip Peripheral Drivers"
 
+    menuconfig BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
     menuconfig BSP_USING_UART
         bool "Enable UART"
         default y
@@ -29,10 +34,11 @@ menu "On-chip Peripheral Drivers"
             config BSP_USING_UART5
                 bool "Enable UART5"
                 default y
+            
         endif
-    source "../libraries/HAL_Drivers/Kconfig"
+        endmenu
-    
 endmenu
 
    
-endmenu
+
+

bsp/fm33lc026/board/board.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2018, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
@@ -71,7 +71,33 @@ FL_ErrorStatus FL_UART_GPIO_Init(UART_Type *UARTx)
     return status;
 }
 
+FL_ErrorStatus FL_SPI_GPIO_Init(SPI_Type *SPIx)
+{
+    FL_ErrorStatus status = FL_FAIL;
+    FL_GPIO_InitTypeDef GPIO_InitStruct;
+    if (SPIx == SPI1)
+    {
+        GPIO_InitStruct.pin = FL_GPIO_PIN_11 | FL_GPIO_PIN_10 | FL_GPIO_PIN_9;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
 
+        status=FL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+    }
+    else if (SPIx == SPI2)
+    {
+        GPIO_InitStruct.pin = FL_GPIO_PIN_8 | FL_GPIO_PIN_10 | FL_GPIO_PIN_9;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
+        
+        status=FL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+    }
+
+    return status;
+}
 
 static void RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLL_R, uint32_t PLL_DB, uint32_t PLL_O)
 {

bsp/fm33lc026/board/board.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2018, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
@@ -13,6 +13,7 @@
 
 #include <rtthread.h>
 #include "fm33lc0xx_fl.h"
+#include "drv_gpio.h"
 
 #ifdef __cplusplus
 extern "C" {

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/CMSIS/Include/fm33lc0xx.h

@@ -25,7 +25,7 @@
  *******************************************************************************************************/
 
 
-/** @addtogroup Keil
+/** @addtogroup CMSIS
   * @{
   */
 
@@ -579,6 +579,7 @@ typedef struct
   __IO uint32_t DCFG;             /*!< USB Device Config Register,                          Address offset: 0x800*/
   __IO uint32_t DCTL;             /*!< USB Device Control Register,                         Address offset: 0x804*/
   __IO uint32_t DSTS;             /*!< USB Device Status Register,                          Address offset: 0x808*/
+  __IO uint32_t RSV31;            /*!< Reserved ,                                          Address offset: 0x80C*/
   __IO uint32_t DIEPMSK;          /*!< USB Device In Endpoint Interrupt Mask Register,      Address offset: 0x810*/
   __IO uint32_t DOEPMSK;          /*!< USB Device OUT Endpoint Interrupt Mask Registe,      Address offset: 0x814*/
   __IO uint32_t DAINT;            /*!< USB Device All Endpoint Interrupt Register,          Address offset: 0x818*/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/CMSIS/Include/system_fm33lc0xx.h

@@ -2,8 +2,8 @@
  * @file     system_fm33lc0xx.h
  * @brief    CMSIS Cortex-M0 Device Peripheral Access Layer Header File for
  *           Device FM33LC0XX
- * @version  V2.00
+ * @version  V2.0.0
- * @date     15. March 2021
+ * @date     15. Mar 2021
  *
  * @note
  *
@@ -35,7 +35,6 @@
    POSSIBILITY OF SUCH DAMAGE.
    ---------------------------------------------------------------------------*/
 
-
 #ifndef SYSTEM_FM33LC0XX_H
 #define SYSTEM_FM33LC0XX_H
 
@@ -43,110 +42,119 @@
 extern "C" {
 #endif
 
-#include <stdint.h>
+/**
-#include <stdio.h>
+  * @brief CMSIS Device version number
-#include "fm33lc0xx.h"
+  */
+#define __FM33LC0xx_CMSIS_VERSION_MAIN      (0x02) /*!< [31:24] main version */
+#define __FM33LC0xx_CMSIS_VERSION_SUB1      (0x03) /*!< [23:16] sub1 version */
+#define __FM33LC0xx_CMSIS_VERSION_SUB2      (0x01) /*!< [15:0]  sub2 version */
+#define __FM33LC0xx_CMSIS_VERSION           ((__FM33LC0xx_CMSIS_VERSION_MAIN  << 24)\
+                                             |(__FM33LC0xx_CMSIS_VERSION_SUB1 << 16)\
+                                             |(__FM33LC0xx_CMSIS_VERSION_SUB2))
 
+/* Configurations ------------------------------------------------------------*/
+/**
+ *  @brief LSCLK source
+ *  @note  Comment the following line to use only LPOSC as LSCLK source, and also
+ *         disable LSCLK auto switch function.
+ */
 #define USE_LSCLK_CLOCK_SRC_XTLF
 
-//#define   SYSCLK_SRC_RC4M
+#ifdef USE_LSCLK_CLOCK_SRC_XTLF
-//#define   SYSCLK_SRC_XTHF
-#define   SYSCLK_SRC_RCHF
-//#define   SYSCLK_SRC_PLL
 
+/**
+ *  @brief LSCLK source
+ *  @note  Comment the following line to disable LSCLK auto switch function.
+ */
+#define USE_LSCLK_AUTO_SWITCH
 
+#endif  /* USE_LSCLK_CLOCK_SRC_XTLF */
 
-//#define   USE_PLL_CLOCK_SRC_RCHF
+/**
-//#define   USE_PLL_CLOCK_SRC_XTHF
+ *  @brief Open IWDT on program startup
+ *  @note  Uncomment the following line to use IWDT on startup. User can modify
+ *         the IWDT_OVERFLOW_PERIOD to change the IDWT overflow period.
+ */
+/* #define USE_IWDT_ON_STARTUP */
 
-
+#ifdef USE_IWDT_ON_STARTUP
-#if ((!defined(SYSCLK_SRC_RC4M)) && (!defined(SYSCLK_SRC_XTHF))&&(!defined(SYSCLK_SRC_PLL))&&(!defined(SYSCLK_SRC_RCHF)))
+/*
-    #error "Must select a clock source form the SYSCLK_SRC_RC4M or SYSCLK_SRC_XTHF or SYSCLK_SRC_PLL or SYSCLK_SRC_RCHF as the master clock."
+    Valid value of IWDT_OVERFLOW_PERIOD:
-#elif (((defined(SYSCLK_SRC_RC4M)) && ((defined(SYSCLK_SRC_XTHF))||(defined(SYSCLK_SRC_PLL))||(defined(SYSCLK_SRC_RCHF))))||\
+    - 0x0: 125ms
-     ((defined(SYSCLK_SRC_XTHF)) && ((defined(SYSCLK_SRC_RC4M))||(defined(SYSCLK_SRC_PLL))||(defined(SYSCLK_SRC_RCHF))))||\
+    - 0x1: 250ms
-     ((defined(SYSCLK_SRC_PLL)) && ((defined(SYSCLK_SRC_XTHF))||(defined(SYSCLK_SRC_RC4M))||(defined(SYSCLK_SRC_RCHF))))||\
+    - 0x2: 500ms
-     ((defined(SYSCLK_SRC_RCHF)) && ((defined(SYSCLK_SRC_XTHF))||(defined(SYSCLK_SRC_PLL))||(defined(SYSCLK_SRC_RC4M)))))
+    - 0x3: 1s
-    #error "Only one clock source can be selected as the master clock."
+    - 0x4: 2s
+    - 0x5: 4s
+    - 0x6: 8s
+    - 0x7: 16s
+ */
+#define IWDT_OVERFLOW_PERIOD  0x7
 #endif
 
-#if defined(SYSCLK_SRC_PLL) && !defined(USE_PLL_CLOCK_SRC_RCHF) && !defined(USE_PLL_CLOCK_SRC_XTHF)
+/* Includes ------------------------------------------------------------------*/
-    #error "You have chosen to enable the PLL, so you need to specify the clock source for the PLL.."
+#include <stdint.h>
-#elif defined(SYSCLK_SRC_PLL) && (defined(USE_PLL_CLOCK_SRC_RCHF) && defined(USE_PLL_CLOCK_SRC_XTHF))
-    #error "Please select one of the USE_PLL_CLOCK_SRC_RCHF and USE_PLL_CLOCK_SRC_XTHF in your application"
-#endif
-
-#if !defined  (XTHF_VALUE)
-    #define XTHF_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* XTHF_VALUE */    
-
-#if !defined  (XTLF_VALUE)
-    #define XTLF_VALUE    ((uint32_t)32768U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* XTLF_VALUE */         
 
+/* Device Includes -----------------------------------------------------------*/
+#include "fm33lc0xx.h"
 
+/* Trim Values ---------------------------------------------------------------*/
+/* Validate Function */
 #define LDT_CHECK(_N_VALUE_, _T_VALUE_)                         \
-                            ((((_N_VALUE_ >> 16) & 0xffff) ==   \
+                            ((((_N_VALUE_ >> 16) & 0xFFFFU) ==   \
-                            ((~_N_VALUE_) & 0xffff)) ? _N_VALUE_ : _T_VALUE_)
+                            (~(_N_VALUE_) & 0xFFFFU)) ? (_N_VALUE_) : (_T_VALUE_))
 
-#define LPOSC_LDT_TRIM      (*(uint32_t *)0x1FFFFB20)   // LPOSC 常温校准值
+/* Trim Values Address */
-#define RCHF8M_LDT_TRIM     (*(uint32_t *)0x1FFFFB40)	// RC8M 常温校准值
+#define LPOSC_LDT_TRIM      (*(uint32_t *)0x1FFFFB20U)   /* LPOSC trim value */
-#define RCHF16M_LDT_TRIM 	(*(uint32_t *)0x1FFFFB3C)	// RC16M 常温校准值
+#define RCHF8M_LDT_TRIM     (*(uint32_t *)0x1FFFFB40U)   /* RC8M  trim value */
-#define RCHF24M_LDT_TRIM 	(*(uint32_t *)0x1FFFFB38)	// RC24M 常温校准值
+#define RCHF16M_LDT_TRIM    (*(uint32_t *)0x1FFFFB3CU)   /* RC16M trim value */
-#define RCMF4M_LDT_TRIM     (*(uint32_t *)0x1FFFFB44)   // RCMF 常温校准值
+#define RCHF24M_LDT_TRIM    (*(uint32_t *)0x1FFFFB38U)   /* RC24M trim value */
+#define RCMF4M_LDT_TRIM     (*(uint32_t *)0x1FFFFB44U)   /* RCMF  trim value */
 
-#define LPOSC_TRIM          (LDT_CHECK(LPOSC_LDT_TRIM, 0x80) & 0xff)
+/* Trim Values */
-#define RCMF4M_TRIM         (LDT_CHECK(RCMF4M_LDT_TRIM, 0x40) & 0x7f)
+#define LPOSC_TRIM          (LDT_CHECK(LPOSC_LDT_TRIM,   0x80) & 0xFFU)
-#define RCHF8M_TRIM         (LDT_CHECK(RCHF8M_LDT_TRIM, 0x40) & 0x7f)
+#define RCMF4M_TRIM         (LDT_CHECK(RCMF4M_LDT_TRIM,  0x40) & 0x7FU)
-#define RCHF16M_TRIM        (LDT_CHECK(RCHF16M_LDT_TRIM, 0x40) & 0x7f)
+#define RCHF8M_TRIM         (LDT_CHECK(RCHF8M_LDT_TRIM,  0x40) & 0x7FU)
-#define RCHF24M_TRIM        (LDT_CHECK(RCHF24M_LDT_TRIM, 0x40) & 0x7f)
+#define RCHF16M_TRIM        (LDT_CHECK(RCHF16M_LDT_TRIM, 0x40) & 0x7FU)
+#define RCHF24M_TRIM        (LDT_CHECK(RCHF24M_LDT_TRIM, 0x40) & 0x7FU)
 
+/* Default Clock Frequency Values --------------------------------------------*/
 
-#define __SYSTEM_CLOCK      (8000000)
+#define XTHF_DEFAULT_VALUE    ((uint32_t)8000000U)  /*!< Default value of XTHF in Hz */
+#define XTLF_DEFAULT_VALUE    ((uint32_t)32768U)    /*!< Default value of XTLF in Hz */
 
+/* Default system core clock value */
+#define HCLK_DEFAULT_VALUE    ((uint32_t)8000000U)
 
-/**
+/* Exported Clock Frequency Variables --------------------------------------- */
-  * @brief FL NVIC Init Sturcture definition
+/*
+    - [SystemCoreClock] holds the value of CPU operation clock freqency, and is initialized
+        to HCLK_DEFAULT_VALUE;
+    - [XTLFClock] holds the value of external low-frequency oscillator(XTLF),
+        and is initialized to XTLF_DEFAULT_VALUE;
+    - [XTHFClock] holds the value of external high_frequency oscillator(XTHF),
+        and is initialized to XTHF_DEFAULT_VALUE;
+
+    NOTE: If users are using these two external oscillators, they should modify the
+    value of XTLFClock and XTHFClock to the correct value, and call the SystemCoreClockUpdate()
+    to update the SystemCoreClock variable, otherwise those codes which rely on
+    the SystemCoreClock variable will fail to run.
  */
-typedef  struct
+extern uint32_t XTLFClock;        /*!< External Low-freq Osc Clock Frequency (XTLF) */
-{
+extern uint32_t XTHFClock;        /*!< External High-freq Osc Clock Frequency (XTHF) */
-    /* 中断抢占优先级 */
+extern uint32_t SystemCoreClock;  /*!< System Clock Frequency (Core Clock) */
-    uint32_t preemptPriority;
-    
-}NVIC_ConfigTypeDef;
-
 
 /**
- * Initialize the system
- *
- * @param  none
- * @return none
- *
  * @brief  Setup the microcontroller system.
- *         Initialize the System and update the SystemCoreClock variable.
+ *         Initialize the System.
  */
-void SystemInit (void);
+void SystemInit(void);
 
 /**
- * Update SystemCoreClock variable
- *
- * @param  none
- * @return none
- *
  * @brief  Updates the SystemCoreClock with current core Clock
  *         retrieved from cpu registers.
  */
-extern uint32_t SystemCoreClock;
+void SystemCoreClockUpdate(void);
-void SystemCoreClockUpdate (void);
-/**
-  * @brief	NVIC_Init config NVIC
-  *
-  * @param 	NVIC_configStruct configParams
-  *
-  * @param 	IRQn Interrupt number
-  *
-  * @retval	None
-  */
-void NVIC_Init(NVIC_ConfigTypeDef  *NVIC_configStruct,IRQn_Type IRQn);
 
 #ifdef __cplusplus
 }

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/CMSIS/system_fm33lc0xx.c

@@ -2,8 +2,8 @@
  * @file     system_fm33lc0xx.c
  * @brief    CMSIS Cortex-M0 Device Peripheral Access Layer Source File for
  *           Device FM33LC0XX
- * @version  V2.00
+ * @version  V2.0.0
- * @date     15. March 2021
+ * @date     15. Mar 2021
  *
  * @note
  *
@@ -35,48 +35,38 @@
    POSSIBILITY OF SUCH DAMAGE.
    ---------------------------------------------------------------------------*/
 
-
 #include "system_fm33lc0xx.h"
-/*----------------------------------------------------------------------------
-  DEFINES
- *----------------------------------------------------------------------------*/
 
-/*----------------------------------------------------------------------------
+/* Clock Variable definitions ------------------------------------------------*/
-  Define clocks
+uint32_t XTLFClock = XTLF_DEFAULT_VALUE;        /*!< External Low-freq Osc Clock Frequency (XTLF) */
- *----------------------------------------------------------------------------*/
+uint32_t XTHFClock = XTHF_DEFAULT_VALUE;        /*!< External High-freq Osc Clock Frequency (XTHF) */
-/* ToDo: add here your necessary defines for device initialization
+uint32_t SystemCoreClock = HCLK_DEFAULT_VALUE;  /*!< System Clock Frequency (Core Clock) */
-         following is an example for different system frequencies             */
 
-/*----------------------------------------------------------------------------
+/* Clock functions -----------------------------------------------------------*/
-  Clock Variable definitions
+/**
- *----------------------------------------------------------------------------*/
+ *  @brief Retrieve the PLL clock frequency
-/* ToDo: initialize SystemCoreClock with the system core clock frequency value
+ *
-         achieved after system intitialization.
+ *  @retval PLL clock frequency
-         This means system core clock frequency after call to SystemInit()    */
+ */
-uint32_t SystemCoreClock = __SYSTEM_CLOCK;  /*!< System Clock Frequency (Core Clock)*/
-
-/*----------------------------------------------------------------------------
-  Clock functions
- *----------------------------------------------------------------------------*/
 static uint32_t SystemPLLClockUpdate(void)
 {
     uint32_t clock = 0;
 
-    // 时钟源
+    /* Acquire PLL clock source */
     switch ((RCC->PLLCR >> 1) & 0x1)
     {
         case 0:
-            switch ((RCC->RCHFCR >> 16) & 0xf)
+            switch ((RCC->RCHFCR >> 16) & 0xFU)
             {
-                case 1: // 16M
+                case 1: /* 16MHz */
                     clock = 16000000;
                     break;
 
-                case 2: // 24M
+                case 2: /* 24MHz */
                     clock = 24000000;
                     break;
 
-                case 0: // 8M
+                case 0: /* 8MHz */
                 default:
                     clock = 8000000;
                     break;
@@ -84,50 +74,50 @@ static uint32_t SystemPLLClockUpdate(void)
             break;
 
         case 1:
-            clock = XTHF_VALUE;
+            clock = XTHFClock;
             break;
     }
 
-    // 分频
+    /* Acquire PLL prescaler */
     switch ((RCC->PLLCR >> 0x4) & 0x7)
     {
-        case 0: // 不分频
+        case 0: /* input divided by 1 */
             clock /= 1;
             break;
 
-        case 1: // 2分频
+        case 1: /* input divided by 2 */
             clock /= 2;
             break;
 
-        case 2: // 4分频
+        case 2: /* input divided by 4 */
             clock /= 4;
             break;
 
-        case 3: // 8分频
+        case 3: /* input divided by 8 */
             clock /= 8;
             break;
 
-        case 4: // 12分频
+        case 4: /* input divided by 12 */
             clock /= 12;
             break;
 
-        case 5: // 16分频
+        case 5: /* input divided by 16 */
             clock /= 16;
             break;
 
-        case 6: // 24分频
+        case 6: /* input divided by 24 */
             clock /= 24;
             break;
 
-        case 7: // 32分频
+        case 7: /* input divided by 32 */
             clock /= 32;
             break;
     }
 
-    // 倍频比
+    /* Acquire PLL multiplier and calculate PLL frequency */
-    clock = clock * (((RCC->PLLCR >> 16) & 0x7f) + 1);
+    clock = clock * (((RCC->PLLCR >> 16) & 0x7F) + 1);
 
-    // 输出选择
+    /* Acquire PLL output channel(PLLx1 or PLLx2) */
     if ((RCC->PLLCR >> 3) & 0x1)
     {
         clock *= 2;
@@ -136,52 +126,63 @@ static uint32_t SystemPLLClockUpdate(void)
     return clock;
 }
 
-void SystemCoreClockUpdate (void)            /* Get Core Clock Frequency      */
+/**
+ *  @brief Update the core clock frequency variable: SystemCoreClock
+ *
+ */
+void SystemCoreClockUpdate(void)
 {
     switch ((RCC->SYSCLKCR >> 0) & 0x7)
     {
-        case 1: // XTHF
+        case 1: /* XTHF */
-            SystemCoreClock = XTHF_VALUE;
+            SystemCoreClock = XTHFClock;
             break;
 
-        case 2: // PLL
+        case 2: /* PLL */
             SystemCoreClock = SystemPLLClockUpdate();
             break;
 
-        case 4: // RCMF
+        case 4: /* RCMF */
             switch ((RCC->RCMFCR >> 16) & 0x3)
             {
-                case 0: // 不分频
+                case 0: /* output divided by 1 */
                     SystemCoreClock = 4000000;
                     break;
 
-                case 1: // 4分频
+                case 1: /* output divided by 4 */
                     SystemCoreClock = 1000000;
                     break;
 
-                case 2: // 8分频
+                case 2: /* output divided by 8 */
                     SystemCoreClock = 500000;
                     break;
 
-                case 3: // 16分频
+                case 3: /* output divided by 16 */
                     SystemCoreClock = 250000;
                     break;
             }
             break;
 
-        case 5: // LSCLK
+        case 5: /* LSCLK */
-        case 6: // LPOSC
+            #ifdef USE_LSCLK_CLOCK_SRC_LPOSC
-            SystemCoreClock = 32768;
+                SystemCoreClock = 32000;
+            #else
+                SystemCoreClock = XTLFClock;
+            #endif
             break;
 
-        case 7: // USBBCK
+        case 6: /* LPOSC */
+            SystemCoreClock = 32000;
+            break;
+
+        case 7: /* USBBCK */
             switch ((RCC->SYSCLKCR >> 3) & 0x1)
             {
-                case 0: // USBBCK 48M
+                case 0: /* USBBCK 48MHz */
                     SystemCoreClock = 48000000;
                     break;
 
-                case 1: // USBBCK 120M 2分频
+                case 1: /* USBBCK 120MHz/2 */
                     SystemCoreClock = 60000000;
                     break;
             }
@@ -190,15 +191,15 @@ void SystemCoreClockUpdate (void)            /* Get Core Clock Frequency      */
         default:
             switch ((RCC->RCHFCR >> 16) & 0xf)
             {
-                case 1: // 16M
+                case 1: /* 16MHz */
                     SystemCoreClock = 16000000;
                     break;
 
-                case 2: // 24M
+                case 2: /* 24MHz */
                     SystemCoreClock = 24000000;
                     break;
 
-                case 0: // 8M
+                case 0: /* 8MHz */
                 default:
                     SystemCoreClock = 8000000;
                     break;
@@ -208,78 +209,93 @@ void SystemCoreClockUpdate (void)            /* Get Core Clock Frequency      */
 }
 
 /**
-  * @brief	NVIC_Init config NVIC
-  *
-  * @param 	NVIC_configStruct configParams
-  *
-  * @param 	IRQn Interrupt number
-  *
-  * @retval	None
-  */
-void NVIC_Init(NVIC_ConfigTypeDef  *NVIC_configStruct,IRQn_Type IRQn)
-{
-    /* Params Check */
-    if(NVIC_configStruct->preemptPriority>3)
-    {
-        NVIC_configStruct->preemptPriority = 3;
-    }
-    
-	NVIC_DisableIRQ(IRQn);
-	NVIC_SetPriority(IRQn,NVIC_configStruct->preemptPriority);
-	NVIC_EnableIRQ(IRQn);
-}
-
-/**
- * Initialize the system
- *
- * @param  none
- * @return none
- *
  * @brief  Setup the microcontroller system.
  *         Initialize the System.
  */
-void SystemInit (void)
+void SystemInit(void)
 {
+    #if !defined(MFANG) && defined(USE_LSCLK_CLOCK_SRC_XTLF)
     uint32_t temp;
-    
-    /*  */
-    RCC->PLLCR = (uint32_t)0x00000000U;
-    RCC->SYSCLKCR = (uint32_t)0x0A000000U;
-     /* PAD RCC*/
-    RCC->PCLKCR1 |=  (0x1U << 7U);
-    #ifdef USE_LSCLK_CLOCK_SRC_XTLF           
-        GPIOD->FCR |= 0x3C0000; 
-        /* XTLF*/
-        RCC->XTLFCR  = (uint32_t)(0x00000000U);
-        /* XTLF*/
-        RCC->XTLFCR  |= (uint32_t)(0x00000005U<<8);
-        for(temp = 2000;temp>0;temp--);
-        /* LSCLKXTLF*/
-        RCC->LSCLKSEL = 0xAA;
-        /* LSCXTLF*/
-        RCC->SYSCLKCR |= 0x8000000U;
-    #else
-        RCC->SYSCLKCR &= 0x7FFFFFFU;
-        RCC->LSCLKSEL = 0x55;
     #endif
-    /*PDR*/
-    RMU->PDRCR |=0x01;
-    /*BOR*/
-    RMU->BORCR &=0xFE;
 
-    /* DEBUG IWDT WWDT */
+    #if defined(USE_IWDT_ON_STARTUP)
-    DBG->CR =0x03;
+    RCC->PCLKCR1 |= 0x20U;              /* Enable IWDT Operation Clock */
+    IWDT->CR = IWDT_OVERFLOW_PERIOD;    /* Configure IWDT overflow period */
+    IWDT->SERV = 0x12345A5AU;           /* Enable IWDT */
+    #endif
 
-    RCC->RCHFTR = RCHF24M_TRIM;
+    /* Reset PLL & SYSCLK selection */
+    RCC->PLLCR = 0x00000000U;
+    RCC->SYSCLKCR = 0x0A000000U;
+
+    /* Enable PAD Operation Clock */
+    RCC->PCLKCR1 |= (0x1U << 7);
+
+    #ifndef MFANG   /* MFANG handles clock configurations by itself */
+    #ifdef USE_LSCLK_CLOCK_SRC_XTLF
+
+        /* XTLF IO configuration */
+        GPIOD->FCR |= 0x003C0000U;
+
+        /* Enable XTLF */
+        RCC->XTLFCR = 0x00000000U;
+        RCC->XTLFCR |= (uint32_t)(0x5U << 8);
+        for(temp = 2000U; temp > 0U; temp--);
+
+    #ifdef USE_LSCLK_AUTO_SWITCH
+
+        /* Enable LSCLK auto switch */
+        RCC->SYSCLKCR |= 0x8000000U;
+
+        /* LSCLK from XTLF */
+        RCC->LSCLKSEL = 0xAAU;
+
+    #else
+
+        /* Disable LSCLK auto switch */
+        CMU->SYSCLKCR &= 0x7FFFFFFU;
+
+        /* LSCLK from XTLF */
+        CMU->LSCLKSEL = 0xAAU;
+
+    #endif  /* USE_LSCLK_AUTO_SWITCH */
+    #else
+
+        /* Disable LSCLK auto switch */
+        RCC->SYSCLKCR &= 0x7FFFFFFU;
+
+        /* LSCLK from LPOSC */
+        RCC->LSCLKSEL = 0x55U;
+
+    #endif  /* USE_LSCLK_CLOCK_SRC_XTLF */
+    #endif  /* MFANG */
+
+    /* PDR & BOR Configuration */
+    RMU->PDRCR = 0x1U;
+    RMU->BORCR = 0xEU;
+
+    /* Disable IWDT & WWDT, enable other peripherals(e.g. timers) under Debug Mode */
+    DBG->CR = 0x3U;
+
+    /* Load clock trim value */
+    RCC->RCHFTR = RCHF8M_TRIM;
     RCC->RCMFTR = RCMF4M_TRIM;
     RCC->LPOSCTR = LPOSC_TRIM;
 
-    GPIOD->PUEN |= 0x3 << 7;
+    /* Enable SWD port pull up */
+    GPIOD->PUEN |= (0x3U << 7U);
 
     /* DMA Flash Channel: Flash->RAM */
-    RCC->PCLKCR2 |= 0x1 << 4;
+    RCC->PCLKCR2 |= (0x1U << 4U);
-    DMA->CH7CR |= 0x1 << 10;
+    DMA->CH7CR |= (0x1U << 10U);
-    RCC->PCLKCR2 &= ~(0x1 << 4);
+    RCC->PCLKCR2 &= ~(0x1U << 4U);
+
+    /* Update System Core Clock */
+    SystemCoreClockUpdate();
+
+    #if defined(USE_IWDT_ON_STARTUP)
+    IWDT->SERV = 0x12345A5AU; /* Feed IWDT */
+    #endif
 }
 
 

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33_assert.h

@@ -0,0 +1,40 @@
+/**
+  ****************************************************************************************************
+  * @file    fm33_assert.h
+  * @author  FMSH Application Team
+  * @brief   Assert function define
+  ****************************************************************************************************
+  * @attention
+  *
+  * Copyright (c) [2019] [Fudan Microelectronics]
+  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You may obtain a copy of Mulan PSL v1 at:
+  * http://license.coscl.org.cn/MulanPSL
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * PURPOSE.
+  * See the Mulan PSL v1 for more details.
+  *
+  ****************************************************************************************************
+  */
+#ifndef __FM33_ASSERT_H
+#define __FM33_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef  USE_FULL_ASSERT
+#define assert_param(expr) do{if((expr) == 0)for(;;);}while(0)
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl.h

@@ -6,20 +6,20 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
 
-/* Define to prevent recursive inclusion -------------------------------------------------------------*/
+/* Define to prevent recursive inclusion --------------------------------------------------------------*/
 #ifndef __FM33LC0XX_FL_H
 #define __FM33LC0XX_FL_H
 
@@ -27,64 +27,12 @@
 extern "C" {
 #endif
 
-/**
-  * @brief Select FM33LC0XX Device
-  */
-#if !defined  (FM33LC0XX)
-#define FM33LC0XX
-#endif /* FM33LC0XX */
-
-/* Defines -------------------------------------------------------------------------------------------*/
-
-/**
-  * @brief List of drivers to be used.
-  *
-  * @note Uncomment following lines to disable specified driver.
-  */
-
-#ifndef MFANG
-
-#define FL_ADC_DRIVER_ENABLED
-#define FL_AES_DRIVER_ENABLED
-#define FL_ATIM_DRIVER_ENABLED
-#define FL_BSTIM32_DRIVER_ENABLED
-#define FL_COMP_DRIVER_ENABLED
-#define FL_CRC_DRIVER_ENABLED
-#define FL_DIVAS_DRIVER_ENABLED
-#define FL_DMA_DRIVER_ENABLED
-#define FL_EXTI_DRIVER_ENABLED
-#define FL_FLASH_DRIVER_ENABLED
-#define FL_GPIO_DRIVER_ENABLED
-#define FL_GPTIM_DRIVER_ENABLED
-#define FL_I2C_DRIVER_ENABLED
-#define FL_IWDT_DRIVER_ENABLED
-#define FL_LCD_DRIVER_ENABLED
-#define FL_LPTIM32_DRIVER_ENABLED
-#define FL_LPUART_DRIVER_ENABLED
-#define FL_OPA_DRIVER_ENABLED
-#define FL_PMU_DRIVER_ENABLED
-#define FL_RCC_DRIVER_ENABLED
-#define FL_RMU_DRIVER_ENABLED
-#define FL_RNG_DRIVER_ENABLED
-#define FL_RTC_DRIVER_ENABLED
-#define FL_SPI_DRIVER_ENABLED
-#define FL_SVD_DRIVER_ENABLED
-#define FL_U7816_DRIVER_ENABLED
-#define FL_UART_DRIVER_ENABLED
-#define FL_VREF_DRIVER_ENABLED
-#define FL_WWDT_DRIVER_ENABLED
-
-#endif
-
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33xx.h"
+#include "fm33lc0xx_fl_conf.h"
-#include "fm33_assert.h"
+#include "fm33lc0xx_fl_def.h"
-#include <stdbool.h>
-#include <stddef.h>
-#include <stdint.h>
 
 /* Macros ---------------------------------------------------------------------------------------------*/
-/** @defgroup FL_Private_Macros FL Driver Library Private Macros
+/** @defgroup FL_Exported_Macros FL Driver Library Exported Macros
   * @{
   */
 
@@ -92,7 +40,7 @@ extern "C" {
   * @brief FM33LC0xx FL Driver Library version number
   */
 #define __FM33LC0xx_FL_VERSION_MAIN   (0x02) /*!< [31:24] main version */
-#define __FM33LC0xx_FL_VERSION_SUB1   (0x01) /*!< [23:16] sub1 version */
+#define __FM33LC0xx_FL_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
 #define __FM33LC0xx_FL_VERSION_SUB2   (0x01) /*!< [15:0]  sub2 version */
 #define __FM33LC0xx_FL_VERSION        ((__FM33LC0xx_FL_VERSION_MAIN  << 24)\
                                          |(__FM33LC0xx_FL_VERSION_SUB1 << 16)\
@@ -108,44 +56,39 @@ extern "C" {
   * @}
   */
 
-/* Types ----------------------------------------------------------------------------------------------*/
+/* Struct Defines -------------------------------------------------------------------------------------*/
-/** @defgroup FL_ET_Return FL Exported Return Type Defines
+/** @defgroup FL_ET_NVIC FL Driver Library NVIC Init Sturcture Defines
   * @{
   */
 
-typedef enum
+typedef struct
 {
-    FL_RESET = 0U,
+    /** 中断抢占优先级 */
-    FL_SET = !FL_RESET
+    uint32_t preemptPriority;
-} FL_FlagStatus, FL_ITStatus;
 
-typedef enum
+} FL_NVIC_ConfigTypeDef;
-{
-    FL_DISABLE = 0U,
-    FL_ENABLE = !FL_DISABLE
-} FL_FunState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == FL_DISABLE) || ((STATE) == FL_ENABLE))
-
-typedef enum
-{
-    FL_FAIL = 0U,
-    FL_PASS = !FL_FAIL
-} FL_ErrorStatus;
 
 /**
   * @}
   */
 
 /* Exported Functions ---------------------------------------------------------------------------------*/
-/** @defgroup FL_EF_DELAY   Exported FL Driver Library Delay Support Functions
+/** @defgroup FL_EF_DELAY   FL Driver Library Exported Delay Support Functions
   * @{
   */
 
+void FL_DelayInit(void);
+void FL_DelayUs(uint32_t count);
+void FL_DelayMs(uint32_t count);
+void FL_DelayUsStart(uint32_t count);
+void FL_DelayMsStart(uint32_t count);
+bool FL_DelayEnd(void);
+
 /**
   * @}
   */
 
-/** @defgroup FL_EF_INIT   Exported FL Driver Library Init Functions
+/** @defgroup FL_EF_INIT   FL Driver Library Exported Init Functions
   * @{
   */
 
@@ -155,130 +98,15 @@ void FL_Init(void);
   * @}
   */
 
-/* Post Includes --------------------------------------------------------------------------------------*/
+/** @defgroup FL_EF_NVIC   FL Driver Library Exported NVIC Configuration Functions
-/**
+  * @{
-  * @brief Include peripheral's header file
   */
 
-#if defined(USE_FULL_ASSERT)
+void FL_NVIC_Init(FL_NVIC_ConfigTypeDef *configStruct, IRQn_Type irq);
-#include "fm33_assert.h"
-#endif /* USE_FULL_ASSERT */
 
-#if defined(FL_ADC_DRIVER_ENABLED)
+/**
-#include "fm33lc0xx_fl_adc.h"
+  * @}
-#endif /* FL_ADC_DRIVER_ENABLED */
+  */
-
-#if defined(FL_AES_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_aes.h"
-#endif /* FL_AES_DRIVER_ENABLED */
-
-#if defined(FL_ATIM_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_atim.h"
-#endif /* FL_ATIM_DRIVER_ENABLED */
-
-#if defined(FL_BSTIM32_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_bstim32.h"
-#endif /* FL_BSTIM32_DRIVER_ENABLED */
-
-#if defined(FL_COMP_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_comp.h"
-#endif /* FL_COMP_DRIVER_ENABLED */
-
-#if defined(FL_CRC_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_crc.h"
-#endif /* FL_CRC_DRIVER_ENABLED */
-
-#if defined(FL_DIVAS_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_divas.h"
-#endif /* FL_DIVAS_DRIVER_ENABLED */
-
-#if defined(FL_DMA_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_dma.h"
-#endif /* FL_DMA_DRIVER_ENABLED */
-
-#if defined(FL_EXTI_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_exti.h"
-#endif /* FL_EXTI_DRIVER_ENABLED */
-
-#if defined(FL_FLASH_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_flash.h"
-#endif /* FL_FLASH_DRIVER_ENABLED */
-
-#if defined(FL_GPIO_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_gpio.h"
-#endif /* FL_GPIO_DRIVER_ENABLED */
-
-#if defined(FL_GPTIM_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_gptim.h"
-#endif /* FL_GPTIM_DRIVER_ENABLED */
-
-#if defined(FL_I2C_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_i2c.h"
-#endif /* FL_I2C_DRIVER_ENABLED */
-
-#if defined(FL_IWDT_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_iwdt.h"
-#endif /* FL_IWDT_DRIVER_ENABLED */
-
-#if defined(FL_LCD_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_lcd.h"
-#endif /* FL_LCD_DRIVER_ENABLED */
-
-#if defined(FL_LPTIM32_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_lptim32.h"
-#endif /* FL_LPTIM32_DRIVER_ENABLED */
-
-#if defined(FL_LPUART_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_lpuart.h"
-#endif /* FL_LPUART_DRIVER_ENABLED */
-
-#if defined(FL_OPA_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_opa.h"
-#endif /* FL_OPA_DRIVER_ENABLED */
-
-#if defined(FL_PMU_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_pmu.h"
-#endif /* FL_PMU_DRIVER_ENABLED */
-
-#if defined(FL_RCC_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_rcc.h"
-#endif /* FL_RCC_DRIVER_ENABLED */
-
-#if defined(FL_RMU_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_rmu.h"
-#endif /* FL_RMU_DRIVER_ENABLED */
-
-#if defined(FL_RNG_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_rng.h"
-#endif /* FL_RNG_DRIVER_ENABLED */
-
-#if defined(FL_RTC_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_rtc.h"
-#endif /* FL_RTC_DRIVER_ENABLED */
-
-#if defined(FL_SPI_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_spi.h"
-#endif /* FL_SPI_DRIVER_ENABLED */
-
-#if defined(FL_SVD_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_svd.h"
-#endif /* FL_SVD_DRIVER_ENABLED */
-
-#if defined(FL_U7816_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_u7816.h"
-#endif /* FL_U7816_DRIVER_ENABLED */
-
-#if defined(FL_UART_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_uart.h"
-#endif /* FL_UART_DRIVER_ENABLED */
-
-#if defined(FL_VREF_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_vref.h"
-#endif /* FL_VREF_DRIVER_ENABLED */
-
-#if defined(FL_WWDT_DRIVER_ENABLED)
-#include "fm33lc0xx_fl_wwdt.h"
-#endif /* FL_WWDT_DRIVER_ENABLED */
 
 #ifdef __cplusplus
 }
@@ -286,4 +114,4 @@ void FL_Init(void);
 
 #endif /* __FM33LC0XX_FL_H */
 
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_adc.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -271,6 +271,7 @@ typedef struct
 #define    FL_ADC_INTERNAL_VREF1P2                                (0x1U << 17U)
 #define    FL_ADC_INTERNAL_OPA1                                   (0x1U << 18U)
 #define    FL_ADC_INTERNAL_OPA2                                   (0x1U << 19U)
+#define    FL_ADC_ALL_CHANNEL                                     (0xfffffU << 0U)
 
 
 
@@ -1488,6 +1489,7 @@ __STATIC_INLINE uint32_t FL_ADC_GetSamplingInterval(ADC_Type *ADCx)
   *           @arg @ref FL_ADC_INTERNAL_VREF1P2
   *           @arg @ref FL_ADC_INTERNAL_OPA1
   *           @arg @ref FL_ADC_INTERNAL_OPA2
+  *           @arg @ref FL_ADC_ALL_CHANNEL
   * @retval   None
   */
 __STATIC_INLINE void FL_ADC_EnableSequencerChannel(ADC_Type *ADCx, uint32_t channel)
@@ -1516,6 +1518,7 @@ __STATIC_INLINE void FL_ADC_EnableSequencerChannel(ADC_Type *ADCx, uint32_t chan
   *           @arg @ref FL_ADC_INTERNAL_VREF1P2
   *           @arg @ref FL_ADC_INTERNAL_OPA1
   *           @arg @ref FL_ADC_INTERNAL_OPA2
+  *           @arg @ref FL_ADC_ALL_CHANNEL
   * @retval   None
   */
 __STATIC_INLINE void FL_ADC_DisableSequencerChannel(ADC_Type *ADCx, uint32_t channel)
@@ -1616,14 +1619,14 @@ __STATIC_INLINE void FL_ADC_WriteAnalogWDGHighThreshold(ADC_Type *ADCx, uint32_t
   */
 __STATIC_INLINE uint32_t FL_ADC_ReadAnalogWDGHighThreshold(ADC_Type *ADCx)
 {
-    return (uint32_t)(READ_BIT(ADCx->HLTR, 0xfffU) >> 16U);
+    return (uint32_t)(READ_BIT(ADCx->HLTR, (0xfffU << 16U)) >> 16U);
 }
 
 /**
   * @}
   */
 
-/** @defgroup ADC_FL_EF_Init Initialization and de-initialization functions
+/** @defgroup ADC_FL_EF_Init ADC Initialization and de-initialization Functions
   * @{
   */
 FL_ErrorStatus FL_ADC_CommonDeInit(void);
@@ -1652,4 +1655,4 @@ FL_ErrorStatus FL_ADC_CommonInit(FL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
 #endif /* __FM33LC0XX_FL_ADC_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_aes.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -698,4 +698,4 @@ FL_ErrorStatus FL_AES_Init(AES_Type *AESx, FL_AES_InitTypeDef *AES_InitStructer)
 #endif /* __FM33LC0XX_FL_AES_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_atim.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -3787,4 +3787,4 @@ FL_ErrorStatus FL_ATIM_BDTR_Init(ATIM_Type *TIMx, FL_ATIM_BDTR_InitTypeDef *TIM_
 #endif /* __FM33LC0XX_FL_ATIM_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.1 @ 2020-09-12*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_bstim32.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -480,4 +480,4 @@ void FL_BSTIM32_StructInit(FL_BSTIM32_InitTypeDef *initStruct);
 #endif /* __FM33LC0XX_FL_BSTIM32_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_comp.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -64,7 +64,7 @@ typedef struct
     uint32_t digitalFilter;
 
     /** 数字滤波器长度 */
-    uint32_t digitalFilterLen; //此芯片不可设
+    uint32_t digitalFilterLen;  /* 此芯片不可设 */
 
 } FL_COMP_InitTypeDef;
 
@@ -569,4 +569,4 @@ FL_ErrorStatus FL_COMP_Init(COMP_Type *COMPx, FL_COMP_InitTypeDef *initStruct);
 #endif /* __FM33LC0XX_FL_COMP_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.1 @ 2020-09-22*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_conf.h

@@ -0,0 +1,195 @@
+/**
+  *******************************************************************************************************
+  * @file    fm33lc0xx_fl_conf.h
+  * @author  FMSH Application Team
+  * @brief   Header file of FL Driver Library Configurations
+  *******************************************************************************************************
+  * @attention
+  *
+  * Copyright (c) [2021] [Fudan Microelectronics]
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
+  * You may obtain a copy of Mulan PSL v2 at:
+  *          http://license.coscl.org.cn/MulanPSL2
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+  * See the Mulan PSL v2 for more details.
+  *
+  *******************************************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion --------------------------------------------------------------*/
+#ifndef __FM33LC0XX_FL_CONF_H
+#define __FM33LC0XX_FL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Defines --------------------------------------------------------------------------------------------*/
+
+/**
+  * @brief List of drivers to be used.
+  *
+  * @note Uncomment following lines to disable specified driver.
+  */
+#define FL_ADC_DRIVER_ENABLED
+#define FL_AES_DRIVER_ENABLED
+#define FL_ATIM_DRIVER_ENABLED
+#define FL_BSTIM32_DRIVER_ENABLED
+#define FL_COMP_DRIVER_ENABLED
+#define FL_CRC_DRIVER_ENABLED
+#define FL_DIVAS_DRIVER_ENABLED
+#define FL_DMA_DRIVER_ENABLED
+#define FL_EXTI_DRIVER_ENABLED
+#define FL_FLASH_DRIVER_ENABLED
+#define FL_GPIO_DRIVER_ENABLED
+#define FL_GPTIM_DRIVER_ENABLED
+#define FL_I2C_DRIVER_ENABLED
+#define FL_IWDT_DRIVER_ENABLED
+#define FL_LCD_DRIVER_ENABLED
+#define FL_LPTIM32_DRIVER_ENABLED
+#define FL_LPUART_DRIVER_ENABLED
+#define FL_OPA_DRIVER_ENABLED
+#define FL_PMU_DRIVER_ENABLED
+#define FL_RCC_DRIVER_ENABLED
+#define FL_RMU_DRIVER_ENABLED
+#define FL_RNG_DRIVER_ENABLED
+#define FL_RTC_DRIVER_ENABLED
+#define FL_SPI_DRIVER_ENABLED
+#define FL_SVD_DRIVER_ENABLED
+#define FL_U7816_DRIVER_ENABLED
+#define FL_UART_DRIVER_ENABLED
+#define FL_VREF_DRIVER_ENABLED
+#define FL_WWDT_DRIVER_ENABLED
+
+/* Device Includes ------------------------------------------------------------------------------------*/
+/**
+  * @brief Include peripheral's header file
+  */
+
+#if defined(FL_ADC_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_adc.h"
+#endif /* FL_ADC_DRIVER_ENABLED */
+
+#if defined(FL_AES_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_aes.h"
+#endif /* FL_AES_DRIVER_ENABLED */
+
+#if defined(FL_ATIM_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_atim.h"
+#endif /* FL_ATIM_DRIVER_ENABLED */
+
+#if defined(FL_BSTIM32_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_bstim32.h"
+#endif /* FL_BSTIM32_DRIVER_ENABLED */
+
+#if defined(FL_COMP_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_comp.h"
+#endif /* FL_COMP_DRIVER_ENABLED */
+
+#if defined(FL_CRC_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_crc.h"
+#endif /* FL_CRC_DRIVER_ENABLED */
+
+#if defined(FL_DIVAS_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_divas.h"
+#endif /* FL_DIVAS_DRIVER_ENABLED */
+
+#if defined(FL_DMA_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_dma.h"
+#endif /* FL_DMA_DRIVER_ENABLED */
+
+#if defined(FL_EXTI_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_exti.h"
+#endif /* FL_EXTI_DRIVER_ENABLED */
+
+#if defined(FL_FLASH_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_flash.h"
+#endif /* FL_FLASH_DRIVER_ENABLED */
+
+#if defined(FL_GPIO_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_gpio.h"
+#endif /* FL_GPIO_DRIVER_ENABLED */
+
+#if defined(FL_GPTIM_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_gptim.h"
+#endif /* FL_GPTIM_DRIVER_ENABLED */
+
+#if defined(FL_I2C_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_i2c.h"
+#endif /* FL_I2C_DRIVER_ENABLED */
+
+#if defined(FL_IWDT_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_iwdt.h"
+#endif /* FL_IWDT_DRIVER_ENABLED */
+
+#if defined(FL_LCD_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_lcd.h"
+#endif /* FL_LCD_DRIVER_ENABLED */
+
+#if defined(FL_LPTIM32_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_lptim32.h"
+#endif /* FL_LPTIM32_DRIVER_ENABLED */
+
+#if defined(FL_LPUART_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_lpuart.h"
+#endif /* FL_LPUART_DRIVER_ENABLED */
+
+#if defined(FL_OPA_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_opa.h"
+#endif /* FL_OPA_DRIVER_ENABLED */
+
+#if defined(FL_PMU_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_pmu.h"
+#endif /* FL_PMU_DRIVER_ENABLED */
+
+#if defined(FL_RCC_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_rcc.h"
+#endif /* FL_RCC_DRIVER_ENABLED */
+
+#if defined(FL_RMU_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_rmu.h"
+#endif /* FL_RMU_DRIVER_ENABLED */
+
+#if defined(FL_RNG_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_rng.h"
+#endif /* FL_RNG_DRIVER_ENABLED */
+
+#if defined(FL_RTC_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_rtc.h"
+#endif /* FL_RTC_DRIVER_ENABLED */
+
+#if defined(FL_SPI_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_spi.h"
+#endif /* FL_SPI_DRIVER_ENABLED */
+
+#if defined(FL_SVD_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_svd.h"
+#endif /* FL_SVD_DRIVER_ENABLED */
+
+#if defined(FL_U7816_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_u7816.h"
+#endif /* FL_U7816_DRIVER_ENABLED */
+
+#if defined(FL_UART_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_uart.h"
+#endif /* FL_UART_DRIVER_ENABLED */
+
+#if defined(FL_VREF_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_vref.h"
+#endif /* FL_VREF_DRIVER_ENABLED */
+
+#if defined(FL_WWDT_DRIVER_ENABLED)
+#include "fm33lc0xx_fl_wwdt.h"
+#endif /* FL_WWDT_DRIVER_ENABLED */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __FM33LC0XX_FL_CONF_H */
+
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_crc.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -471,4 +471,4 @@ FL_ErrorStatus FL_CRC_Init(CRC_Type *CRCx, FL_CRC_InitTypeDef *CRC_InitStruct);
 #endif /* __FM33LC0XX_FL_CRC_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_def.h

@@ -0,0 +1,92 @@
+/**
+  *******************************************************************************************************
+  * @file    fm33lc0xx_fl_def.h
+  * @author  FMSH Application Team
+  * @brief   Header file of FL Driver Library Defines
+  *******************************************************************************************************
+  * @attention
+  *
+  * Copyright (c) [2021] [Fudan Microelectronics]
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
+  * You may obtain a copy of Mulan PSL v2 at:
+  *          http://license.coscl.org.cn/MulanPSL2
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+  * See the Mulan PSL v2 for more details.
+  *
+  *******************************************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion --------------------------------------------------------------*/
+#ifndef __FM33LC0XX_FL_DEF_H
+#define __FM33LC0XX_FL_DEF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes -------------------------------------------------------------------------------------------*/
+#include "fm33lc0xx.h"
+#include "fm33_assert.h"
+#include <stddef.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+/* Macros ---------------------------------------------------------------------------------------------*/
+/** @defgroup FL_Exported_Macros FL Driver Library Private Macros
+  * @{
+  */
+
+/**
+  * @brief Bit-wise operation macros used by FL driver library functions
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+#define READ_REG(REG)         ((REG))
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+  * @}
+  */
+
+/* Types ----------------------------------------------------------------------------------------------*/
+/** @defgroup FL_PT_Return FL Driver Library Private Return Type Defines
+  * @{
+  */
+
+typedef enum
+{
+    FL_RESET = 0U,
+    FL_SET = !FL_RESET
+} FL_FlagStatus, FL_ITStatus;
+
+typedef enum
+{
+    FL_DISABLE = 0U,
+    FL_ENABLE = !FL_DISABLE
+} FL_FunState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == FL_DISABLE) || ((STATE) == FL_ENABLE))
+
+typedef enum
+{
+    FL_FAIL = 0U,
+    FL_PASS = !FL_FAIL
+} FL_ErrorStatus;
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __FM33LC0XX_FL_DEF_H */
+
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_divas.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -203,4 +203,4 @@ uint32_t FL_DIVAS_Hdiv_Calculation(DIV_Type *DIVx, int32_t DivisorEnd, int16_t D
 #endif /* __FM33LC0XX_FL_DIVAS_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_dma.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -50,7 +50,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1284,4 +1284,4 @@ FL_ErrorStatus FL_DMA_StartTransmission(DMA_Type *DMAx, FL_DMA_ConfigTypeDef *co
 #endif /* __FM33LC0XX_FL_DMA_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.14-0.2 @ 2020-10-20*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_exti.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,10 +28,16 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
+
+/** @defgroup EXTI EXTI
+  * @brief EXTI FL driver
+  * @{
+  */
+
 /* Exported types -------------------------------------------------------------------------------------*/
 /** @defgroup EXTI_FL_ES_INIT EXTI Exported Init structures
   * @{
@@ -108,6 +114,9 @@ void            FL_EXTI_StructInit(FL_EXTI_InitTypeDef *init);
   * @}
   */
 
+/**
+  * @}
+  */
 
 /**
   * @}
@@ -120,4 +129,4 @@ void            FL_EXTI_StructInit(FL_EXTI_InitTypeDef *init);
 #endif /* __FM33LC0XX_FL_EXTI_H */
 
 /*************************Py_Code_Generator Version: 0.1-0.14-0.2 @ 2021-03-16*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_flash.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -978,4 +978,4 @@ FL_ErrorStatus FL_FLASH_Program_Sector(FLASH_Type *FLASHx, uint32_t sectorNum, u
 #endif /* __FM33LC0XX_FL_FLASH_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.14-0.2 @ 2020-12-15*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_gpio.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -289,37 +289,37 @@ typedef struct
 
 
 #define    FL_GPIO_FOUT0_SELECT_XTLF                              (0x0U << GPIO_FOUTSEL_FOUT0_Pos)
-#define    FL_GPIO_FOUT0_SELECT_RCLP                              (0x1U << GPIO_FOUTSEL_FOUT0_Pos)
+#define    FL_GPIO_FOUT0_SELECT_LPOSC                             (0x1U << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_RCHF_DIV64                        (0x2U << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_LSCLK                             (0x3U << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_AHBCLK_DIV64                      (0x4U << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_RTCTM                             (0x5U << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_PLLOUTPUT_DIV64                   (0x6U << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_RTCCLK64Hz                        (0x7U << GPIO_FOUTSEL_FOUT0_Pos)
-#define    FL_GPIO_FOUT0_SELECT_APBCLK_DIV64                      (0x8U << GPIO_FOUTSEL_FOUT0_Pos)
+#define    FL_GPIO_FOUT0_SELECT_APB1CLK_DIV64                     (0x8U << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_PLLOUTPUT                         (0x9U << GPIO_FOUTSEL_FOUT0_Pos)
-#define    FL_GPIO_FOUT0_SELECT_RC4M_PSC                          (0xaU << GPIO_FOUTSEL_FOUT0_Pos)
+#define    FL_GPIO_FOUT0_SELECT_RCMF_PSC                          (0xaU << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_RCHF                              (0xbU << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_XTHF_DIV64                        (0xcU << GPIO_FOUTSEL_FOUT0_Pos)
-#define    FL_GPIO_FOUT0_SELECT_ADCCLK_DIV64                      (0xdU << GPIO_FOUTSEL_FOUT0_Pos)
+#define    FL_GPIO_FOUT0_SELECT_COMP1_OUTPUT                      (0xdU << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_CLK_8K                            (0xeU << GPIO_FOUTSEL_FOUT0_Pos)
 #define    FL_GPIO_FOUT0_SELECT_ADC_CLK                           (0xfU << GPIO_FOUTSEL_FOUT0_Pos)
 
 
 #define    FL_GPIO_FOUT1_SELECT_XTLF                              (0x0U << GPIO_FOUTSEL_FOUT1_Pos)
-#define    FL_GPIO_FOUT1_SELECT_RCLP                              (0x1U << GPIO_FOUTSEL_FOUT1_Pos)
+#define    FL_GPIO_FOUT1_SELECT_LPOSC                             (0x1U << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_RCHF_DIV64                        (0x2U << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_LSCLK                             (0x3U << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_AHBCLK_DIV64                      (0x4U << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_RTCTM                             (0x5U << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_PLLOUTPUT_DIV64                   (0x6U << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_RTCCLK64Hz                        (0x7U << GPIO_FOUTSEL_FOUT1_Pos)
-#define    FL_GPIO_FOUT1_SELECT_APBCLK_DIV64                      (0x8U << GPIO_FOUTSEL_FOUT1_Pos)
+#define    FL_GPIO_FOUT1_SELECT_APB1CLK_DIV64                     (0x8U << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_PLLOUTPUT                         (0x9U << GPIO_FOUTSEL_FOUT1_Pos)
-#define    FL_GPIO_FOUT1_SELECT_RC4M_PSC                          (0xaU << GPIO_FOUTSEL_FOUT1_Pos)
+#define    FL_GPIO_FOUT1_SELECT_RCMF_PSC                          (0xaU << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_RCHF                              (0xbU << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_XTHF_DIV64                        (0xcU << GPIO_FOUTSEL_FOUT1_Pos)
-#define    FL_GPIO_FOUT1_SELECT_COMP1_OUTPUT                      (0xdU << GPIO_FOUTSEL_FOUT1_Pos)
+#define    FL_GPIO_FOUT1_SELECT_ADCCLK_DIV64                      (0xdU << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_CLK_8K                            (0xeU << GPIO_FOUTSEL_FOUT1_Pos)
 #define    FL_GPIO_FOUT1_SELECT_COMP2_OUTPUT                      (0xfU << GPIO_FOUTSEL_FOUT1_Pos)
 
@@ -921,7 +921,14 @@ __STATIC_INLINE uint32_t FL_GPIO_GetOutputPin(GPIO_Type *GPIOx, uint32_t pin)
   */
 __STATIC_INLINE void FL_GPIO_ToggleOutputPin(GPIO_Type *GPIOx, uint32_t pin)
 {
-    WRITE_REG(GPIOx->DO, READ_REG(GPIOx->DO) ^ pin);
+    if(pin&GPIOx->DO)
+    {
+      WRITE_REG(GPIOx->DRST, pin);
+    }
+    else
+    {
+      WRITE_REG(GPIOx->DSET, pin);
+    }
 }
 
 /**
@@ -1274,19 +1281,19 @@ __STATIC_INLINE uint32_t FL_GPIO_ReadEXTILines(GPIO_COMMON_Type *GPIOx)
   * @param    GPIOx GPIO Port
   * @param    select This parameter can be one of the following values:
   *           @arg @ref FL_GPIO_FOUT0_SELECT_XTLF
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_RCLP
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_LPOSC
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RCHF_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_LSCLK
   *           @arg @ref FL_GPIO_FOUT0_SELECT_AHBCLK_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RTCTM
   *           @arg @ref FL_GPIO_FOUT0_SELECT_PLLOUTPUT_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RTCCLK64Hz
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_APBCLK_DIV64
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_APB1CLK_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_PLLOUTPUT
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_RC4M_PSC
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_RCMF_PSC
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RCHF
   *           @arg @ref FL_GPIO_FOUT0_SELECT_XTHF_DIV64
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_ADCCLK_DIV64
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_COMP1_OUTPUT
   *           @arg @ref FL_GPIO_FOUT0_SELECT_CLK_8K
   *           @arg @ref FL_GPIO_FOUT0_SELECT_ADC_CLK
   * @retval   None
@@ -1302,19 +1309,19 @@ __STATIC_INLINE void FL_GPIO_SetFOUT0(GPIO_COMMON_Type *GPIOx, uint32_t select)
   * @param    GPIOx GPIO Port
   * @retval   Returned value can be one of the following values:
   *           @arg @ref FL_GPIO_FOUT0_SELECT_XTLF
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_RCLP
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_LPOSC
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RCHF_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_LSCLK
   *           @arg @ref FL_GPIO_FOUT0_SELECT_AHBCLK_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RTCTM
   *           @arg @ref FL_GPIO_FOUT0_SELECT_PLLOUTPUT_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RTCCLK64Hz
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_APBCLK_DIV64
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_APB1CLK_DIV64
   *           @arg @ref FL_GPIO_FOUT0_SELECT_PLLOUTPUT
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_RC4M_PSC
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_RCMF_PSC
   *           @arg @ref FL_GPIO_FOUT0_SELECT_RCHF
   *           @arg @ref FL_GPIO_FOUT0_SELECT_XTHF_DIV64
-  *           @arg @ref FL_GPIO_FOUT0_SELECT_ADCCLK_DIV64
+  *           @arg @ref FL_GPIO_FOUT0_SELECT_COMP1_OUTPUT
   *           @arg @ref FL_GPIO_FOUT0_SELECT_CLK_8K
   *           @arg @ref FL_GPIO_FOUT0_SELECT_ADC_CLK
   */
@@ -1329,19 +1336,19 @@ __STATIC_INLINE uint32_t FL_GPIO_GetFOUT0(GPIO_COMMON_Type *GPIOx)
   * @param    GPIOx GPIO Port
   * @param    select This parameter can be one of the following values:
   *           @arg @ref FL_GPIO_FOUT1_SELECT_XTLF
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_RCLP
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_LPOSC
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RCHF_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_LSCLK
   *           @arg @ref FL_GPIO_FOUT1_SELECT_AHBCLK_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RTCTM
   *           @arg @ref FL_GPIO_FOUT1_SELECT_PLLOUTPUT_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RTCCLK64Hz
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_APBCLK_DIV64
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_APB1CLK_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_PLLOUTPUT
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_RC4M_PSC
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_RCMF_PSC
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RCHF
   *           @arg @ref FL_GPIO_FOUT1_SELECT_XTHF_DIV64
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_COMP1_OUTPUT
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_ADCCLK_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_CLK_8K
   *           @arg @ref FL_GPIO_FOUT1_SELECT_COMP2_OUTPUT
   * @retval   None
@@ -1357,19 +1364,19 @@ __STATIC_INLINE void FL_GPIO_SetFOUT1(GPIO_COMMON_Type *GPIOx, uint32_t select)
   * @param    GPIOx GPIO Port
   * @retval   Returned value can be one of the following values:
   *           @arg @ref FL_GPIO_FOUT1_SELECT_XTLF
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_RCLP
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_LPOSC
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RCHF_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_LSCLK
   *           @arg @ref FL_GPIO_FOUT1_SELECT_AHBCLK_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RTCTM
   *           @arg @ref FL_GPIO_FOUT1_SELECT_PLLOUTPUT_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RTCCLK64Hz
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_APBCLK_DIV64
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_APB1CLK_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_PLLOUTPUT
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_RC4M_PSC
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_RCMF_PSC
   *           @arg @ref FL_GPIO_FOUT1_SELECT_RCHF
   *           @arg @ref FL_GPIO_FOUT1_SELECT_XTHF_DIV64
-  *           @arg @ref FL_GPIO_FOUT1_SELECT_COMP1_OUTPUT
+  *           @arg @ref FL_GPIO_FOUT1_SELECT_ADCCLK_DIV64
   *           @arg @ref FL_GPIO_FOUT1_SELECT_CLK_8K
   *           @arg @ref FL_GPIO_FOUT1_SELECT_COMP2_OUTPUT
   */
@@ -1955,5 +1962,5 @@ void FL_GPIO_ALLPIN_LPM_MODE(void);
 
 #endif /* __FM33LC0XX_FL_GPIO_H*/
 
-/*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
+/*************************Py_Code_Generator Version: 0.1-0.14-0.2 @ 2021-08-19*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_gptim.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -173,7 +173,7 @@ typedef struct
   * ---------------------------------------------------
   * ITR2   | 0      | BSTIM32_TRGO  | 计数触发
   *        | 1      | LPUART2_RX    | 宽度捕捉
-  *        | 2      | RCLP          | 周期捕捉
+  *        | 2      | LPOSC         | 周期捕捉
   *        | 3      | XTLF          | 周期捕捉
   * ---------------------------------------------------
   * ITR3   | 0      | COMP1_TRGO    | 计数触发
@@ -198,7 +198,7 @@ typedef struct
   * ---------------------------------------------------
   * ITR2   | 0      | BSTIM32_TRGO  | 计数触发
   *        | 1      | LSCLK         | 周期捕捉
-  *        | 2      | RCLP          | 周期捕捉
+  *        | 2      | LPOSC         | 周期捕捉
   *        | 3      | XTLF          | 周期捕捉
   * ---------------------------------------------------
   * ITR3   | 0      | COMP1_TRGO    | 计数触发
@@ -2955,4 +2955,4 @@ FL_ErrorStatus FL_GPTIM_ETR_Init(GPTIM_Type *TIMx, FL_GPTIM_ETR_InitTypeDef *etr
 #endif /* __FM33LC0XX_FL_GPTIM_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.1 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_i2c.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1862,4 +1862,4 @@ FL_ErrorStatus FL_I2C_MasterMode_Init(I2C_Type *I2Cx, FL_I2C_MasterMode_InitType
 #endif /* __FM33LC0XX_FL_I2C_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.1 @ 2020-09-12*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_iwdt.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -306,4 +306,4 @@ FL_ErrorStatus FL_IWDT_Init(IWDT_Type *IWDTx, FL_IWDT_InitTypeDef *IWDT_InitStru
 #endif /* __FM33LC0XX_FL_IWDT_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-27*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_lcd.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1012,4 +1012,4 @@ void FL_LCD_8COMDisplay(uint32_t *display, uint8_t com, uint8_t seg, uint8_t sta
 #endif /* __FM33LC0XX_FL_LCD_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.14-0.1 @ 2021-02-02*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_lptim32.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1170,4 +1170,4 @@ void FL_LPTIM32_OC_StructInit(FL_LPTIM32_OC_InitTypeDef *initStruct_OC);
 #endif /* __FM33LC0XX_FL_LPTIM32_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_lpuart.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1089,4 +1089,4 @@ FL_ErrorStatus FL_LPUART_Init(LPUART_Type *LPUARTx, FL_LPUART_InitTypeDef *initS
 #endif /* __FM33LC0XX_FL_LPUART_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.1 @ 2020-09-22*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_opa.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -782,4 +782,4 @@ FL_ErrorStatus FL_OPA_Init(OPA_Type *OPAx, FL_OPA_InitTypeDef *initStruct);
 #endif /* __FM33LC0XX_FL_OPA_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_pmu.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -953,4 +953,4 @@ void FL_PMU_StructInit(FL_PMU_SleepInitTypeDef *LPM_InitStruct);
 #endif /* __FM33LC0XX_FL_PMU_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_rmu.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -59,7 +59,7 @@ extern "C" {
 #define    RMU_PDRCR_EN_Msk                                       (0x1U << RMU_PDRCR_EN_Pos)
 #define    RMU_PDRCR_EN                                           RMU_PDRCR_EN_Msk
 
-#define    RMU_BORCR_CFG_Pos                                      (1U)
+#define    RMU_BORCR_CFG_Pos                                      (2U)
 #define    RMU_BORCR_CFG_Msk                                      (0x3U << RMU_BORCR_CFG_Pos)
 #define    RMU_BORCR_CFG                                          RMU_BORCR_CFG_Msk
 
@@ -284,4 +284,4 @@ __STATIC_INLINE void FL_RMU_BORPowerUp_Enable(RMU_Type *RMUx)
 #endif /* __FM33LC0XX_FL_RMU_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_rng.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -261,4 +261,4 @@ uint32_t GetCrc32(uint32_t dataIn);
 #endif /* __FM33LC0XX_FL_RNG_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_rtc.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1386,4 +1386,4 @@ FL_ErrorStatus FL_RTC_ConfigTime(RTC_Type *RTCx, FL_RTC_InitTypeDef *initStruct)
 #endif /* __FM33LC0XX_FL_RTC_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.1 @ 2020-09-22*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_spi.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1080,7 +1080,7 @@ __STATIC_INLINE uint32_t FL_SPI_IsEnabledIT_RXComplete(SPI_Type *SPIx)
   */
 __STATIC_INLINE void FL_SPI_SetFrameMode(SPI_Type *SPIx, uint32_t mode)
 {
-    MODIFY_REG(SPIx->ISR, SPI_ISR_DCN_TX_Msk, mode);
+    WRITE_REG(SPIx->ISR, mode);
 }
 
 /**
@@ -1249,4 +1249,4 @@ void FL_SPI_StructInit(FL_SPI_InitTypeDef *initStruct);
 #endif /* __FM33LC0XX_FL_SPI_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.14-0.1 @ 2020-10-20*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_svd.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -676,4 +676,4 @@ void FL_SVD_StructInit(FL_SVD_InitTypeDef *initStruct);
 #endif /* __FM33LC0XX_FL_SVD_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-25*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_u7816.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1068,4 +1068,4 @@ void FL_U7816_StructInit(FL_U7816_InitTypeDef *U7816_InitStruct);
 #endif /* __FM33LC0XX_FL_U7816_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-27*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_uart.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -1250,4 +1250,4 @@ void FL_UART_StructInit(FL_UART_InitTypeDef *initStruct);
 #endif /* __FM33LC0XX_FL_UART_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-27*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_vref.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -407,4 +407,4 @@ __STATIC_INLINE void FL_VREF_DisableVREFBuffer(VREF_Type *VREFx)
 #endif /* __FM33LC0XX_FL_VREF_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Inc/fm33lc0xx_fl_wwdt.h

@@ -6,15 +6,15 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
@@ -28,7 +28,7 @@
 extern "C" {
 #endif
 /* Includes -------------------------------------------------------------------------------------------*/
-#include "fm33lc0xx_fl.h"
+#include "fm33lc0xx_fl_def.h"
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
   */
@@ -262,4 +262,4 @@ void FL_WWDT_StructInit(FL_WWDT_InitTypeDef *WWDT_InitStruct);
 #endif /* __FM33LC0XX_FL_WWDT_H*/
 
 /*************************Py_Code_Generator Version: 0.1-0.11-0.2 @ 2020-09-23*************************/
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/SConscript

@@ -14,6 +14,9 @@ Src/fm33lc0xx_fl_rcc.c
 Src/fm33lc0xx_fl_gpio.c
 """)
 
+if GetDepend(['RT_USING_PIN']):
+    src += ['Src/fm33lc0xx_fl_exti.c']
+
 if GetDepend(['RT_USING_SERIAL']):
     src += ['Src/fm33lc0xx_fl_uart.c']
     src += ['Src/fm33lc0xx_fl_lpuart.c']

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl.c

@@ -6,20 +6,21 @@
   ****************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   ****************************************************************************************************
   */
 
-/* Includes -------------------------------------------------------------------------------------------*/
+
+/* Includes ----------------------------------------------------------------------------------------*/
 #include "fm33lc0xx_fl.h"
 
 /** @addtogroup FL_EF_DELAY
@@ -73,7 +74,7 @@ __WEAK void FL_DelayMs(uint32_t count)
 /**
   * @brief  Provide no-blocking delay initialization in microseconds.
   * @note   Should be follow By while(!FL_DelayEnd()){ ** user code ** } immediately.
-            The function is declared as __WEAK to be overwritten in case of other
+  *         The function is declared as __WEAK to be overwritten in case of other
   *         implementation in user file.
   * @param  count   specifies the delay count in microseconds.
   * @retval None
@@ -102,7 +103,7 @@ __WEAK void FL_DelayMsStart(uint32_t count)
 /**
   * @brief  Showing if the no-blocking delay has ended.
   * @note   Should be used with FL_DelayMs/UsStart() function.
-            The function is declared as __WEAK to be overwritten in case of other
+  *         The function is declared as __WEAK to be overwritten in case of other
   *         implementation in user file.
   * @param  count   specifies the delay count in milliseconds.
   * @retval true  - delay has ended
@@ -114,7 +115,7 @@ __WEAK bool FL_DelayEnd(void)
 }
 
 /**
-  *@}
+  * @}
   */
 
 /** @addtogroup FL_EF_DELAY
@@ -123,15 +124,41 @@ __WEAK bool FL_DelayEnd(void)
 
 void FL_Init(void)
 {
-    // Init delay support function
+    /* Init delay support function */
     FL_DelayInit();
 }
 
 /**
-  *@}
+  * @}
   */
 
-/*************************(C) COPYRIGHT Fudan Microelectronics **** END OF FILE*************************/
+/** @addtogroup FL_EF_NVIC
+  * @{
+  */
+
+/**
+  * @brief  Configure NVIC for specified Interrupt.
+  * @param  configStruct    NVIC configuration.
+  * @param  irq             Interrupt number.
+  * @retval None
+  */
+void FL_NVIC_Init(FL_NVIC_ConfigTypeDef *configStruct, IRQn_Type irq)
+{
+    /* Check parameter */
+    if(configStruct->preemptPriority > 3)
+    {
+        configStruct->preemptPriority = 3;
+    }
+    NVIC_DisableIRQ(irq);
+    NVIC_SetPriority(irq, configStruct->preemptPriority);
+    NVIC_EnableIRQ(irq);
+}
+
+/**
+  * @}
+  */
+
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/
 
 
 

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl_adc.c

@@ -6,25 +6,22 @@
   ****************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   ****************************************************************************************************
   */
+
+
 /* Includes ------------------------------------------------------------------*/
-#include "fm33lc0xx_fl_adc.h"
+#include "fm33lc0xx_fl.h"
-#include "fm33lc0xx_fl_rcc.h"
-#include "fm33lc0xx_fl_rmu.h"
-#include "fm33lc0xx_fl_svd.h"
-#include "fm33lc0xx_fl_vref.h"
-#include "fm33_assert.h"
 
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
@@ -34,8 +31,10 @@
   * @{
   */
 
+#ifdef FL_ADC_DRIVER_ENABLED
+
 /* Private macros ------------------------------------------------------------*/
-/** @addtogroup ADC_FL_Private_Macros
+/** @addtogroup ADC_FL_PM ADC Private Macros
   * @{
   */
 
@@ -143,10 +142,10 @@
   */
 
 /**
-  * @brief  ADC外设寄存器值为复位值
+  * @brief  恢复ADC公用寄存器到复位值
-  * @param  外设入口地址
+  * @param  None
-  * @retval 返回错误状态，可能值：
+  * @retval 执行结果
-  *         -FL_PASS 外设寄存器值恢复复位值
+  *         -FL_PASS ADC公用寄存器值恢复复位值
   *         -FL_FAIL 未成功执行
   */
 FL_ErrorStatus FL_ADC_CommonDeInit(void)
@@ -158,16 +157,11 @@ FL_ErrorStatus FL_ADC_CommonDeInit(void)
     return FL_PASS;
 }
 /**
-  * @brief  ADC共用寄存器设置以配置外设工作时钟
+  * @brief  配置ADC公用寄存器
-  *
+  * @param  ADC_CommonInitStruct 指向 @ref FL_ADC_CommonInitTypeDef 的结构体，它包含ADC公用寄存器的配置信息
-  * @note   其中LL_LPTIM_OPERATION_MODE_EXTERNAL_ASYN_PAUSE_CNT 模式需要外部脉冲提供给LPTIM模块作为工作时钟，此时
+  * @retval 执行结果
-  *         LPTIM完全工作在异步模式下。
-  * @param  LPTIM  外设入口地址
-  * @param  LPTIM_InitStruct指向LL_LPTIM_TimeInitTypeDef类的结构体，它包含指定LPTIM外设的配置信息
-  *
-  * @retval ErrorStatus枚举值
   *         -FL_FAIL 配置过程发生错误
-  *         -FL_PASS LPUART配置成功
+  *         -FL_PASS ADC公用寄存器配置成功
   */
 FL_ErrorStatus FL_ADC_CommonInit(FL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
 {
@@ -186,9 +180,8 @@ FL_ErrorStatus FL_ADC_CommonInit(FL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
     return status;
 }
 /**
-  * @brief  设置 ADC_CommonInitStruct 为默认配置
+  * @brief  初始化 @ref FL_ADC_CommonInitTypeDef 配置结构体
-  * @param  ADC_CommonInitStruct 指向需要将值设置为默认配置的结构体 @ref LL_ADC_CommonInitTypeDef 结构体
+  * @param  ADC_CommonInitStruct 指向需要初始化的 @ref FL_ADC_CommonInitTypeDef 结构体
-  *
   * @retval None
   */
 void FL_ADC_CommonStructInit(FL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
@@ -198,13 +191,11 @@ void FL_ADC_CommonStructInit(FL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
     ADC_CommonInitStruct->clockPrescaler  = FL_RCC_ADC_PSC_DIV16;
 }
 /**
-  * @brief  恢复对应的ADC入口地址寄存器为默认值
+  * @brief  恢复ADC外设寄存器到复位值
-  *
   * @param  ADCx  外设入口地址
-  *
+  * @retval 执行结果
-  * @retval ErrorStatus枚举值
+  *         -FL_PASS ADC外设寄存器值恢复复位值
-  *         -FL_FAIL 配置过程发生错误
+  *         -FL_FAIL 未成功执行
-  *         -FL_PASS LPUART配置成功
   */
 FL_ErrorStatus FL_ADC_DeInit(ADC_Type *ADCx)
 {
@@ -221,16 +212,14 @@ FL_ErrorStatus  FL_ADC_DeInit(ADC_Type *ADCx)
     return status;
 }
 /**
-  * @brief  初始化ADCx指定的入口地址的外设寄存器
+  * @brief  配置指定的ADC外设
-  *
   * @note   用户必须检查此函数的返回值，以确保自校准完成，否则转换结果精度无法保证，除此之外ADC使能过采样实际不会增加ADC的
   *         转换精度只会提高转换结果的稳定性（同时配置移位寄存器的情况下），同时过采样会降低转换速度。
   * @param  ADCx  外设入口地址
-  * @param  ADC_InitStruct 向一FL_ADC_InitTypeDef结构体，它包含指定ADC外设的配置信息
+  * @param  ADC_InitStruct 指向 @ref FL_ADC_InitTypeDef 的结构体，它包含ADC外设寄存器的配置信息
-  *
+  * @retval 执行结果
-  * @retval ErrorStatus枚举值
   *         -FL_FAIL 配置过程发生错误
-  *         -FL_PASS LPUART配置成功
+  *         -FL_PASS ADC外设寄存器配置成功
   */
 FL_ErrorStatus FL_ADC_Init(ADC_Type *ADCx, FL_ADC_InitTypeDef  *ADC_InitStruct)
 {
@@ -245,15 +234,15 @@ FL_ErrorStatus FL_ADC_Init(ADC_Type *ADCx, FL_ADC_InitTypeDef  *ADC_InitStruct)
     assert_param(IS_FL_ADC_OVERSAMPCOFIG(ADC_InitStruct->oversamplingMode));
     assert_param(IS_FL_ADC_OVERSAMPINGRATIO(ADC_InitStruct->overSampingMultiplier));
     assert_param(IS_FL_ADC_OVERSAMPINGSHIFT(ADC_InitStruct->oversamplingShift));
-    /* 使能a工作时钟 */
+    /* 使能ADC工作时钟 */
     FL_RCC_EnableGroup1BusClock(FL_RCC_GROUP1_BUSCLK_ANAC);
     FL_SVD_EnableADCMonitor(SVD);
     if(!FL_VREF_IsEnabled(VREF))
     {
         FL_VREF_ClearFlag_Ready(VREF);
-        FL_VREF_Enable(VREF);//置位VREF_EN寄存器，使能VREF1p2模块
+        FL_VREF_Enable(VREF);   /* 置位VREF_EN寄存器，使能VREF1p2模块 */
     }
-    FL_VREF_EnableTemperatureSensor(VREF);//置位PTAT_EN寄存器
+    FL_VREF_EnableTemperatureSensor(VREF);  /* 置位PTAT_EN寄存器 */
     while(FL_VREF_IsActiveFlag_Ready(VREF) == 0)
     {
         if(i >= 128000)
@@ -321,11 +310,9 @@ FL_ErrorStatus FL_ADC_Init(ADC_Type *ADCx, FL_ADC_InitTypeDef  *ADC_InitStruct)
     }
     return status;
 }
-
 /**
-  * @brief  设置 ADC_InitStruct 为默认配置
+  * @brief  初始化 @ref FL_ADC_InitTypeDef 配置结构体
-  * @param  ADC_InitStruct 指向需要将值设置为默认配置的结构体 @ref FL_ADC_InitTypeDef 结构体
+  * @param  ADC_InitStruct 指向需要初始化的 @ref FL_ADC_InitTypeDef 结构体
-  *
   * @retval None
   */
 void FL_ADC_StructInit(FL_ADC_InitTypeDef *ADC_InitStruct)
@@ -347,6 +334,8 @@ void FL_ADC_StructInit(FL_ADC_InitTypeDef *ADC_InitStruct)
   * @}
   */
 
+#endif /* FL_ADC_DRIVER_ENABLED */
+
 /**
   * @}
   */
@@ -355,7 +344,4 @@ void FL_ADC_StructInit(FL_ADC_InitTypeDef *ADC_InitStruct)
   * @}
   */
 
-/******************************************* END OF FILE *******************************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/
-
-
-

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl_aes.c

@@ -6,22 +6,22 @@
   ****************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   ****************************************************************************************************
   */
+
+
 /* Includes ------------------------------------------------------------------*/
-#include "fm33lc0xx_fl_rcc.h"
+#include "fm33lc0xx_fl.h"
-#include "fm33lc0xx_fl_aes.h"
-#include "fm33_assert.h"
 
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
@@ -31,6 +31,8 @@
   * @{
   */
 
+#ifdef FL_AES_DRIVER_ENABLED
+
 /* Private macros ------------------------------------------------------------*/
 /** @addtogroup AES_FL_Private_Macros
   * @{
@@ -140,6 +142,8 @@ void FL_AES_StructInit(FL_AES_InitTypeDef *AES_InitStructer)
   * @}
   */
 
+#endif /* FL_AES_DRIVER_ENABLED */
+
 /**
   * @}
   */
@@ -148,5 +152,4 @@ void FL_AES_StructInit(FL_AES_InitTypeDef *AES_InitStructer)
   * @}
   */
 
-/******************************************* END OF FILE *******************************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/
-

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl_atim.c

@@ -6,23 +6,22 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
+
+
 /* Includes ------------------------------------------------------------------*/
-#include "fm33lc0xx_fl_rcc.h"
+#include "fm33lc0xx_fl.h"
-#include "fm33lc0xx_fl_rmu.h"
-#include "fm33lc0xx_fl_atim.h"
-#include "fm33_assert.h"
 
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
@@ -32,6 +31,8 @@
   * @{
   */
 
+#ifdef FL_ATIM_DRIVER_ENABLED
+
 /* Private macros ------------------------------------------------------------------*/
 /** @addtogroup ATIM_FL_Private_Macros
   * @{
@@ -421,7 +422,7 @@ FL_ErrorStatus FL_ATIM_Init(ATIM_Type *TIMx, FL_ATIM_InitTypeDef *TIM_InitStruct
     }
     /* 手动触发更新事件，将配置值写入 */
     FL_ATIM_GenerateUpdateEvent(TIMx);
-    while((!FL_ATIM_IsActiveFlag_Update(ATIM))&i)
+    while((!FL_ATIM_IsActiveFlag_Update(ATIM))&&i)
     {
         i--;
     }
@@ -649,7 +650,7 @@ FL_ErrorStatus FL_ATIM_OC_Init(ATIM_Type *TIMx, uint32_t channel, FL_ATIM_OC_Ini
     OCConfig(TIMx, channel, TIM_OC_InitStruct);
     /* 手动触发更新事件，将配置值写入 */
     FL_ATIM_GenerateUpdateEvent(TIMx);
-    while((!FL_ATIM_IsActiveFlag_Update(ATIM))&i)
+    while((!FL_ATIM_IsActiveFlag_Update(ATIM))&&i)
     {
         i--;
     }
@@ -766,6 +767,8 @@ void FL_ATIM_BDTR_StructInit(FL_ATIM_BDTR_InitTypeDef *TIM_BDTR_InitStruct)
   * @}
   */
 
+#endif /* FL_ATIM_DRIVER_ENABLED */
+
 /**
   * @}
   */
@@ -774,4 +777,4 @@ void FL_ATIM_BDTR_StructInit(FL_ATIM_BDTR_InitTypeDef *TIM_BDTR_InitStruct)
   * @}
   */
 
-/******************************************* END OF FILE *******************************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl_bstim32.c

@@ -6,23 +6,22 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
+
+
 /* Includes ------------------------------------------------------------------*/
-#include "fm33lc0xx_fl_rcc.h"
+#include "fm33lc0xx_fl.h"
-#include "fm33lc0xx_fl_rmu.h"
-#include "fm33lc0xx_fl_bstim32.h"
-#include "fm33_assert.h"
 
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
@@ -32,6 +31,8 @@
   * @{
   */
 
+#ifdef FL_BSTIM32_DRIVER_ENABLED
+
 /* Private macros ------------------------------------------------------------------*/
 /** @addtogroup BSTIM32_FL_Private_Macros
   * @{
@@ -42,9 +43,9 @@
 #define         IS_FL_BSTIM32_AUTORELOAD_MODE(__VALUE__)           (((__VALUE__) == FL_ENABLE)||\
                                                                     ((__VALUE__) == FL_DISABLE))
 
-#define         IS_FL_BSTIM32_CLOCK_SRC(__VALUE__)                 (((__VALUE__) == FL_RCC_BSTIM32_CLK_SOURCE_APB1CLK)||\
+#define         IS_FL_BSTIM32_CLOCK_SRC(__VALUE__)                 (((__VALUE__) == FL_RCC_BSTIM32_CLK_SOURCE_APB2CLK)||\
                                                                     ((__VALUE__) == FL_RCC_BSTIM32_CLK_SOURCE_LSCLK)||\
-                                                                    ((__VALUE__) == FL_RCC_BSTIM32_CLK_SOURCE_RCLP)||\
+                                                                    ((__VALUE__) == FL_RCC_BSTIM32_CLK_SOURCE_LPOSC)||\
                                                                     ((__VALUE__) == FL_RCC_BSTIM32_CLK_SOURCE_RCMF_PSC))
 
 /**
@@ -113,7 +114,7 @@ FL_ErrorStatus FL_BSTIM32_Init(BSTIM32_Type *BSTIM32x, FL_BSTIM32_InitTypeDef *i
     }
     /* 手动触发更新事件，将配置值写入 */
     FL_BSTIM32_GenerateUpdateEvent(BSTIM32x);
-    while((!FL_BSTIM32_IsActiveFlag_Update(BSTIM32x))&i)
+    while((!FL_BSTIM32_IsActiveFlag_Update(BSTIM32x))&&i)
     {
         i--;
     }
@@ -133,13 +134,15 @@ void FL_BSTIM32_StructInit(FL_BSTIM32_InitTypeDef *initStruct)
     initStruct->prescaler         = 0;
     initStruct->autoReload        = 0xFFFFFFFF;
     initStruct->autoReloadState   = FL_ENABLE;
-    initStruct->clockSource       = FL_RCC_BSTIM32_CLK_SOURCE_APB1CLK;
+    initStruct->clockSource       = FL_RCC_BSTIM32_CLK_SOURCE_APB2CLK;
 }
 
 /**
   * @}
   */
 
+#endif /* FL_BSTIM32_DRIVER_ENABLED */
+
 /**
   * @}
   */
@@ -148,4 +151,4 @@ void FL_BSTIM32_StructInit(FL_BSTIM32_InitTypeDef *initStruct)
   * @}
   */
 
-/******************************************* END OF FILE *******************************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl_comp.c

@@ -6,24 +6,22 @@
   ****************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   ****************************************************************************************************
   */
+
+
 /* Includes ------------------------------------------------------------------*/
-#include "fm33lc0xx_fl_comp.h"
+#include "fm33lc0xx_fl.h"
-#include "fm33lc0xx_fl_rmu.h"
-#include "fm33lc0xx_fl_rcc.h"
-#include "fm33lc0xx_fl_opa.h"
-#include "fm33_assert.h"
 
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
@@ -33,6 +31,8 @@
   * @{
   */
 
+#ifdef FL_COMP_DRIVER_ENABLED
+
 /* Private macros ------------------------------------------------------------*/
 /** @addtogroup COMP_FL_Private_Macros
   * @{
@@ -116,8 +116,8 @@ FL_ErrorStatus FL_COMP_Init(COMP_Type *COMPx, FL_COMP_InitTypeDef *initStruct)
     /* 比较器使用vref 打开vref_buf */
     if((initStruct->negativeInput == FL_COMP_INN_SOURCE_VREF) || (initStruct->negativeInput == FL_COMP_INN_SOURCE_VREF_DIV_2))
     {
-        FL_OPA_EnableVrefBuffer(OPA1);//使能
+        FL_OPA_EnableVrefBuffer(OPA1);  /* 使能 */
-        FL_OPA_DisableBypassVrefBuffer(OPA1);//不bypass
+        FL_OPA_DisableBypassVrefBuffer(OPA1);   /* 不bypass */
     }
     if(COMPx == COMP1)
     {
@@ -167,6 +167,8 @@ void FL_COMP_StructInit(FL_COMP_InitTypeDef *initStruct)
   * @}
   */
 
+#endif /* FL_COMP_DRIVER_ENABLED */
+
 /**
   * @}
   */
@@ -175,4 +177,4 @@ void FL_COMP_StructInit(FL_COMP_InitTypeDef *initStruct)
   * @}
   */
 
-/*************************************************************END OF FILE************************************************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl_crc.c

@@ -6,21 +6,22 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
-#include "fm33lc0xx_fl_rcc.h"
+
-#include "fm33lc0xx_fl_crc.h"
+
-#include "fm33_assert.h"
+/* Includes ------------------------------------------------------------------*/
+#include "fm33lc0xx_fl.h"
 
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
@@ -30,6 +31,8 @@
   * @{
   */
 
+#ifdef FL_CRC_DRIVER_ENABLED
+
 /* Private macros ------------------------------------------------------------*/
 /** @addtogroup CRC_FL_Private_Macros
   * @{
@@ -150,6 +153,8 @@ void FL_CRC_StructInit(FL_CRC_InitTypeDef *CRC_InitStruct)
   * @}
   */
 
+#endif /* FL_CRC_DRIVER_ENABLED */
+
 /**
   * @}
   */
@@ -158,4 +163,4 @@ void FL_CRC_StructInit(FL_CRC_InitTypeDef *CRC_InitStruct)
   * @}
   */
 
-/******************************************* END OF FILE *******************************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/Src/fm33lc0xx_fl_divas.c

@@ -6,22 +6,22 @@
   *******************************************************************************************************
   * @attention
   *
-  * Copyright (c) [2019] [Fudan Microelectronics]
+  * Copyright (c) [2021] [Fudan Microelectronics]
-  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * THIS SOFTWARE is licensed under Mulan PSL v2.
-  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You can use this software according to the terms and conditions of the Mulan PSL v2.
-  * You may obtain a copy of Mulan PSL v1 at:
+  * You may obtain a copy of Mulan PSL v2 at:
-  * http://license.coscl.org.cn/MulanPSL
+  *          http://license.coscl.org.cn/MulanPSL2
-  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
-  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
-  * PURPOSE.
+  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
-  * See the Mulan PSL v1 for more details.
+  * See the Mulan PSL v2 for more details.
   *
   *******************************************************************************************************
   */
+
+
 /* Includes ------------------------------------------------------------------*/
-#include "fm33lc0xx_fl_rcc.h"
+#include "fm33lc0xx_fl.h"
-#include "fm33lc0xx_fl_divas.h"
-#include "fm33_assert.h"
 
 /** @addtogroup FM33LC0XX_FL_Driver
   * @{
@@ -31,6 +31,8 @@
   * @{
   */
 
+#ifdef FL_DIVAS_DRIVER_ENABLED
+
 /* Private macros ------------------------------------------------------------*/
 /** @addtogroup DIVAS_FL_Private_Macros
   * @{
@@ -144,6 +146,8 @@ uint32_t FL_DIVAS_Hdiv_Calculation(DIV_Type *DIVx, int32_t DivisorEnd, int16_t D
   * @}
   */
 
+#endif /* FL_DIVAS_DRIVER_ENABLED */
+
 /**
   * @}
   */
@@ -152,4 +156,4 @@ uint32_t FL_DIVAS_Hdiv_Calculation(DIV_Type *DIVx, int32_t DivisorEnd, int16_t D
   * @}
   */
 
-/******************************************* END OF FILE *******************************************/
+/********************** (C) COPYRIGHT Fudan Microelectronics **** END OF FILE ***********************/