mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2026-09-02 21:17:16 +08:00
[bsp][stm32][stm32l475-atk-pandora]Add lcd driver and fix compilation report error on spi_config.h
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
This commit is contained in:
Willian Chan
@@ -53,10 +53,10 @@ extern "C" {
|
||||
|
||||
#ifdef BSP_USING_SPI2
|
||||
#ifndef SPI2_BUS_CONFIG
|
||||
#define SPI2_BUS_CONFIG \
|
||||
{ \
|
||||
.Instance = SPI2, \
|
||||
.bus_name = "spi2", \
|
||||
#define SPI2_BUS_CONFIG \
|
||||
{ \
|
||||
.Instance = SPI2, \
|
||||
.bus_name = "spi2", \
|
||||
}
|
||||
#endif /* SPI2_BUS_CONFIG */
|
||||
#endif /* BSP_USING_SPI2 */
|
||||
@@ -86,21 +86,38 @@ extern "C" {
|
||||
#endif /* BSP_SPI2_RX_USING_DMA */
|
||||
|
||||
#ifdef BSP_USING_SPI3
|
||||
#define SPI3_BUS_CONFIG \
|
||||
{ \
|
||||
.Instance = SPI3, \
|
||||
.bus_name = "spi3", \
|
||||
.dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN, \
|
||||
.dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN, \
|
||||
.dma_rx.Instance = DMA2_Channel1, \
|
||||
.dma_rx.request = DMA_REQUEST_3, \
|
||||
.dma_rx.dma_irq = DMA2_Channel1_IRQn, \
|
||||
.dma_tx.Instance = DMA2_Channel2, \
|
||||
.dma_tx.request = DMA_REQUEST_3, \
|
||||
.dma_tx.dma_irq = DMA2_Channel2_IRQn, \
|
||||
#ifndef SPI3_BUS_CONFIG
|
||||
#define SPI3_BUS_CONFIG \
|
||||
{ \
|
||||
.Instance = SPI3, \
|
||||
.bus_name = "spi3", \
|
||||
}
|
||||
#endif /* SPI3_BUS_CONFIG */
|
||||
#endif /* BSP_USING_SPI3 */
|
||||
|
||||
#endif
|
||||
#ifdef BSP_SPI3_TX_USING_DMA
|
||||
#ifndef SPI3_TX_DMA_CONFIG
|
||||
#define SPI3_TX_DMA_CONFIG \
|
||||
{ \
|
||||
.dma_rcc = SPI3_TX_DMA_RCC, \
|
||||
.Instance = SPI3_TX_DMA_INSTANCE, \
|
||||
.request = SPI3_TX_DMA_REQUEST, \
|
||||
.dma_irq = SPI3_TX_DMA_IRQ, \
|
||||
}
|
||||
#endif /* SPI3_TX_DMA_CONFIG */
|
||||
#endif /* BSP_SPI3_TX_USING_DMA */
|
||||
|
||||
#ifdef BSP_SPI3_RX_USING_DMA
|
||||
#ifndef SPI3_RX_DMA_CONFIG
|
||||
#define SPI3_RX_DMA_CONFIG \
|
||||
{ \
|
||||
.dma_rcc = SPI3_RX_DMA_RCC, \
|
||||
.Instance = SPI3_RX_DMA_INSTANCE, \
|
||||
.request = SPI3_RX_DMA_REQUEST, \
|
||||
.dma_irq = SPI3_RX_DMA_IRQ, \
|
||||
}
|
||||
#endif /* SPI3_RX_DMA_CONFIG */
|
||||
#endif /* BSP_SPI3_RX_USING_DMA */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
|
||||
@@ -126,7 +126,6 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_RT_USING_PWM is not set
|
||||
# CONFIG_RT_USING_MTD_NOR is not set
|
||||
# CONFIG_RT_USING_MTD_NAND is not set
|
||||
# CONFIG_RT_USING_MTD is not set
|
||||
# CONFIG_RT_USING_PM is not set
|
||||
# CONFIG_RT_USING_RTC is not set
|
||||
# CONFIG_RT_USING_SDIO is not set
|
||||
@@ -134,15 +133,10 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_RT_USING_WDT is not set
|
||||
# CONFIG_RT_USING_AUDIO is not set
|
||||
# CONFIG_RT_USING_SENSOR is not set
|
||||
|
||||
#
|
||||
# Using Hardware Crypto drivers
|
||||
#
|
||||
# CONFIG_RT_USING_TOUCH is not set
|
||||
# CONFIG_RT_USING_HWCRYPTO is not set
|
||||
|
||||
#
|
||||
# Using WiFi
|
||||
#
|
||||
# CONFIG_RT_USING_ENCODER is not set
|
||||
# CONFIG_RT_USING_INPUT_CAPTURE is not set
|
||||
# CONFIG_RT_USING_WIFI is not set
|
||||
|
||||
#
|
||||
@@ -156,6 +150,7 @@ CONFIG_RT_USING_PIN=y
|
||||
#
|
||||
# CONFIG_RT_USING_LIBC is not set
|
||||
# CONFIG_RT_USING_PTHREADS is not set
|
||||
CONFIG_RT_LIBC_USING_TIME=y
|
||||
|
||||
#
|
||||
# Network
|
||||
@@ -176,11 +171,6 @@ CONFIG_RT_USING_PIN=y
|
||||
#
|
||||
# CONFIG_RT_USING_LWIP is not set
|
||||
|
||||
#
|
||||
# Modbus master and slave stack
|
||||
#
|
||||
# CONFIG_RT_USING_MODBUS is not set
|
||||
|
||||
#
|
||||
# AT commands
|
||||
#
|
||||
@@ -214,6 +204,7 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_CJSON is not set
|
||||
# CONFIG_PKG_USING_JSMN is not set
|
||||
# CONFIG_PKG_USING_LIBMODBUS is not set
|
||||
# CONFIG_PKG_USING_FREEMODBUS is not set
|
||||
# CONFIG_PKG_USING_LJSON is not set
|
||||
# CONFIG_PKG_USING_EZXML is not set
|
||||
# CONFIG_PKG_USING_NANOPB is not set
|
||||
@@ -246,12 +237,17 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
|
||||
# CONFIG_PKG_USING_ALI_IOTKIT is not set
|
||||
# CONFIG_PKG_USING_AZURE is not set
|
||||
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
|
||||
# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
|
||||
# CONFIG_PKG_USING_NIMBLE is not set
|
||||
# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
|
||||
# CONFIG_PKG_USING_IPMSG is not set
|
||||
# CONFIG_PKG_USING_LSSDP is not set
|
||||
# CONFIG_PKG_USING_AIRKISS_OPEN is not set
|
||||
# CONFIG_PKG_USING_LIBRWS is not set
|
||||
# CONFIG_PKG_USING_TCPSERVER is not set
|
||||
# CONFIG_PKG_USING_PROTOBUF_C is not set
|
||||
# CONFIG_PKG_USING_ONNX_PARSER is not set
|
||||
# CONFIG_PKG_USING_ONNX_BACKEND is not set
|
||||
|
||||
#
|
||||
# security packages
|
||||
@@ -273,6 +269,7 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_OPENMV is not set
|
||||
# CONFIG_PKG_USING_MUPDF is not set
|
||||
# CONFIG_PKG_USING_STEMWIN is not set
|
||||
# CONFIG_PKG_USING_WAVPLAYER is not set
|
||||
|
||||
#
|
||||
# tools packages
|
||||
@@ -303,6 +300,7 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_DFS_YAFFS is not set
|
||||
# CONFIG_PKG_USING_LITTLEFS is not set
|
||||
# CONFIG_PKG_USING_THREAD_POOL is not set
|
||||
# CONFIG_PKG_USING_ROBOTS is not set
|
||||
|
||||
#
|
||||
# peripheral libraries and drivers
|
||||
@@ -310,7 +308,6 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
|
||||
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
|
||||
# CONFIG_PKG_USING_SHT2X is not set
|
||||
# CONFIG_PKG_USING_AP3216C is not set
|
||||
# CONFIG_PKG_USING_STM32_SDIO is not set
|
||||
# CONFIG_PKG_USING_ICM20608 is not set
|
||||
# CONFIG_PKG_USING_U8G2 is not set
|
||||
@@ -328,6 +325,9 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_AD7746 is not set
|
||||
# CONFIG_PKG_USING_PCA9685 is not set
|
||||
# CONFIG_PKG_USING_I2C_TOOLS is not set
|
||||
# CONFIG_PKG_USING_NRF24L01 is not set
|
||||
# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
|
||||
# CONFIG_PKG_USING_LCD_DRIVERS is not set
|
||||
|
||||
#
|
||||
# miscellaneous packages
|
||||
@@ -338,6 +338,7 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_MINILZO is not set
|
||||
# CONFIG_PKG_USING_QUICKLZ is not set
|
||||
# CONFIG_PKG_USING_MULTIBUTTON is not set
|
||||
# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
|
||||
# CONFIG_PKG_USING_CANFESTIVAL is not set
|
||||
# CONFIG_PKG_USING_ZLIB is not set
|
||||
# CONFIG_PKG_USING_DSTR is not set
|
||||
@@ -355,6 +356,8 @@ CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_PKG_USING_HELLO is not set
|
||||
# CONFIG_PKG_USING_VI is not set
|
||||
# CONFIG_PKG_USING_NNOM is not set
|
||||
# CONFIG_PKG_USING_LIBANN is not set
|
||||
# CONFIG_PKG_USING_ELAPACK is not set
|
||||
CONFIG_SOC_FAMILY_STM32=y
|
||||
CONFIG_SOC_SERIES_STM32L4=y
|
||||
|
||||
@@ -368,9 +371,11 @@ CONFIG_SOC_STM32L475VE=y
|
||||
#
|
||||
CONFIG_BSP_USING_STLINK_TO_USART=y
|
||||
# CONFIG_BSP_USING_QSPI_FLASH is not set
|
||||
# CONFIG_BSP_USING_SPI_LCD is not set
|
||||
# CONFIG_BSP_USING_SDCARD is not set
|
||||
# CONFIG_BSP_USING_ICM20608 is not set
|
||||
# CONFIG_BSP_USING_AHT10 is not set
|
||||
# CONFIG_BSP_USING_AUDIO is not set
|
||||
|
||||
#
|
||||
# On-chip Peripheral Drivers
|
||||
@@ -391,7 +396,11 @@ CONFIG_BSP_USING_UART1=y
|
||||
# CONFIG_BSP_USING_ONCHIP_RTC is not set
|
||||
# CONFIG_BSP_USING_WDT is not set
|
||||
# CONFIG_BSP_USING_USBD_FS is not set
|
||||
# CONFIG_BSP_USING_CRC is not set
|
||||
# CONFIG_BSP_USING_RNG is not set
|
||||
# CONFIG_BSP_USING_UDID is not set
|
||||
|
||||
#
|
||||
# Board extended module Drivers
|
||||
#
|
||||
# CONFIG_BSP_USING_NRF24L01 is not set
|
||||
|
||||
@@ -11,7 +11,6 @@
|
||||
#include <rtthread.h>
|
||||
|
||||
#ifdef PKG_USING_NRF24L01
|
||||
|
||||
#include "drv_spi.h"
|
||||
static int rt_hw_nrf24l01_init(void)
|
||||
{
|
||||
@@ -19,5 +18,4 @@ static int rt_hw_nrf24l01_init(void)
|
||||
return RT_EOK;
|
||||
}
|
||||
INIT_COMPONENT_EXPORT(rt_hw_nrf24l01_init);
|
||||
|
||||
#endif
|
||||
#endif /* PKG_USING_NRF24L01 */
|
||||
|
||||
File diff suppressed because one or more lines are too long
@@ -11,15 +11,16 @@ KeepUserPlacement=false
|
||||
Mcu.Family=STM32L4
|
||||
Mcu.IP0=ADC1
|
||||
Mcu.IP1=IWDG
|
||||
Mcu.IP10=TIM1
|
||||
Mcu.IP11=TIM2
|
||||
Mcu.IP12=TIM4
|
||||
Mcu.IP13=TIM15
|
||||
Mcu.IP14=TIM16
|
||||
Mcu.IP15=TIM17
|
||||
Mcu.IP16=USART1
|
||||
Mcu.IP17=USART2
|
||||
Mcu.IP18=USB_OTG_FS
|
||||
Mcu.IP10=SYS
|
||||
Mcu.IP11=TIM1
|
||||
Mcu.IP12=TIM2
|
||||
Mcu.IP13=TIM4
|
||||
Mcu.IP14=TIM15
|
||||
Mcu.IP15=TIM16
|
||||
Mcu.IP16=TIM17
|
||||
Mcu.IP17=USART1
|
||||
Mcu.IP18=USART2
|
||||
Mcu.IP19=USB_OTG_FS
|
||||
Mcu.IP2=NVIC
|
||||
Mcu.IP3=QUADSPI
|
||||
Mcu.IP4=RCC
|
||||
@@ -27,8 +28,8 @@ Mcu.IP5=RTC
|
||||
Mcu.IP6=SAI1
|
||||
Mcu.IP7=SPI1
|
||||
Mcu.IP8=SPI2
|
||||
Mcu.IP9=SYS
|
||||
Mcu.IPNb=19
|
||||
Mcu.IP9=SPI3
|
||||
Mcu.IPNb=20
|
||||
Mcu.Name=STM32L475V(C-E-G)Tx
|
||||
Mcu.Package=LQFP100
|
||||
Mcu.Pin0=PE2
|
||||
@@ -58,26 +59,29 @@ Mcu.Pin3=PE5
|
||||
Mcu.Pin30=PA12
|
||||
Mcu.Pin31=PA13 (JTMS-SWDIO)
|
||||
Mcu.Pin32=PA14 (JTCK-SWCLK)
|
||||
Mcu.Pin33=PB7
|
||||
Mcu.Pin34=PB8
|
||||
Mcu.Pin35=VP_IWDG_VS_IWDG
|
||||
Mcu.Pin36=VP_RTC_VS_RTC_Activate
|
||||
Mcu.Pin37=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
|
||||
Mcu.Pin38=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
|
||||
Mcu.Pin39=VP_SYS_VS_Systick
|
||||
Mcu.Pin33=PC11
|
||||
Mcu.Pin34=PB3 (JTDO-TRACESWO)
|
||||
Mcu.Pin35=PB5
|
||||
Mcu.Pin36=PB7
|
||||
Mcu.Pin37=PB8
|
||||
Mcu.Pin38=VP_IWDG_VS_IWDG
|
||||
Mcu.Pin39=VP_RTC_VS_RTC_Activate
|
||||
Mcu.Pin4=PE6
|
||||
Mcu.Pin40=VP_TIM1_VS_ClockSourceINT
|
||||
Mcu.Pin41=VP_TIM2_VS_ClockSourceINT
|
||||
Mcu.Pin42=VP_TIM4_VS_ClockSourceINT
|
||||
Mcu.Pin43=VP_TIM15_VS_ClockSourceINT
|
||||
Mcu.Pin44=VP_TIM16_VS_ClockSourceINT
|
||||
Mcu.Pin45=VP_TIM17_VS_ClockSourceINT
|
||||
Mcu.Pin40=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
|
||||
Mcu.Pin41=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
|
||||
Mcu.Pin42=VP_SYS_VS_Systick
|
||||
Mcu.Pin43=VP_TIM1_VS_ClockSourceINT
|
||||
Mcu.Pin44=VP_TIM2_VS_ClockSourceINT
|
||||
Mcu.Pin45=VP_TIM4_VS_ClockSourceINT
|
||||
Mcu.Pin46=VP_TIM15_VS_ClockSourceINT
|
||||
Mcu.Pin47=VP_TIM16_VS_ClockSourceINT
|
||||
Mcu.Pin48=VP_TIM17_VS_ClockSourceINT
|
||||
Mcu.Pin5=PC14-OSC32_IN (PC14)
|
||||
Mcu.Pin6=PC15-OSC32_OUT (PC15)
|
||||
Mcu.Pin7=PH0-OSC_IN (PH0)
|
||||
Mcu.Pin8=PH1-OSC_OUT (PH1)
|
||||
Mcu.Pin9=PA2
|
||||
Mcu.PinsNb=46
|
||||
Mcu.PinsNb=49
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32L475VETx
|
||||
@@ -127,10 +131,18 @@ PB14.Signal=SPI2_MISO
|
||||
PB15.Locked=true
|
||||
PB15.Mode=Full_Duplex_Master
|
||||
PB15.Signal=SPI2_MOSI
|
||||
PB3\ (JTDO-TRACESWO).Locked=true
|
||||
PB3\ (JTDO-TRACESWO).Mode=Full_Duplex_Master
|
||||
PB3\ (JTDO-TRACESWO).Signal=SPI3_SCK
|
||||
PB5.Locked=true
|
||||
PB5.Mode=Full_Duplex_Master
|
||||
PB5.Signal=SPI3_MOSI
|
||||
PB7.Locked=true
|
||||
PB7.Signal=S_TIM4_CH2
|
||||
PB8.Locked=true
|
||||
PB8.Signal=S_TIM4_CH3
|
||||
PC11.Mode=Full_Duplex_Master
|
||||
PC11.Signal=SPI3_MISO
|
||||
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
|
||||
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
|
||||
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
|
||||
@@ -182,7 +194,7 @@ ProjectManager.CompilerOptimize=6
|
||||
ProjectManager.ComputerToolchain=false
|
||||
ProjectManager.CoupleFile=false
|
||||
ProjectManager.CustomerFirmwarePackage=
|
||||
ProjectManager.DefaultFWLocation=true
|
||||
ProjectManager.DefaultFWLocation=false
|
||||
ProjectManager.DeletePrevious=true
|
||||
ProjectManager.DeviceId=STM32L475VETx
|
||||
ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.14.0
|
||||
@@ -202,7 +214,7 @@ ProjectManager.StackSize=0x400
|
||||
ProjectManager.TargetToolchain=MDK-ARM V5
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM17_Init-TIM17-false-HAL-true,12-MX_TIM16_Init-TIM16-false-HAL-true,13-MX_TIM15_Init-TIM15-false-HAL-true,14-MX_TIM4_Init-TIM4-false-HAL-true,15-MX_TIM1_Init-TIM1-false-HAL-true
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM17_Init-TIM17-false-HAL-true,12-MX_TIM16_Init-TIM16-false-HAL-true,13-MX_TIM15_Init-TIM15-false-HAL-true,14-MX_TIM4_Init-TIM4-false-HAL-true,15-MX_TIM1_Init-TIM1-false-HAL-true,16-MX_SAI1_Init-SAI1-false-HAL-true,17-MX_SPI3_Init-SPI3-false-HAL-true,18-MX_TIM2_Init-TIM2-false-HAL-true,19-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true
|
||||
RCC.ADCFreq_Value=48000000
|
||||
RCC.AHBFreq_Value=80000000
|
||||
RCC.APB1Freq_Value=80000000
|
||||
@@ -294,6 +306,11 @@ SPI2.Direction=SPI_DIRECTION_2LINES
|
||||
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||
SPI2.Mode=SPI_MODE_MASTER
|
||||
SPI2.VirtualType=VM_MASTER
|
||||
SPI3.CalculateBaudRate=40.0 MBits/s
|
||||
SPI3.Direction=SPI_DIRECTION_2LINES
|
||||
SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||
SPI3.Mode=SPI_MODE_MASTER
|
||||
SPI3.VirtualType=VM_MASTER
|
||||
TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
|
||||
TIM1.IPParameters=Channel-PWM Generation1 CH1
|
||||
TIM2.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
|
||||
|
||||
@@ -75,6 +75,7 @@ SAI_HandleTypeDef hsai_BlockB1;
|
||||
|
||||
SPI_HandleTypeDef hspi1;
|
||||
SPI_HandleTypeDef hspi2;
|
||||
SPI_HandleTypeDef hspi3;
|
||||
|
||||
TIM_HandleTypeDef htim1;
|
||||
TIM_HandleTypeDef htim2;
|
||||
@@ -110,6 +111,7 @@ static void MX_TIM15_Init(void);
|
||||
static void MX_TIM4_Init(void);
|
||||
static void MX_TIM1_Init(void);
|
||||
static void MX_SAI1_Init(void);
|
||||
static void MX_SPI3_Init(void);
|
||||
static void MX_TIM2_Init(void);
|
||||
static void MX_USB_OTG_FS_PCD_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
@@ -165,6 +167,7 @@ int main(void)
|
||||
MX_TIM4_Init();
|
||||
MX_TIM1_Init();
|
||||
MX_SAI1_Init();
|
||||
MX_SPI3_Init();
|
||||
MX_TIM2_Init();
|
||||
MX_USB_OTG_FS_PCD_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
@@ -548,6 +551,46 @@ static void MX_SPI2_Init(void)
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI3 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_SPI3_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SPI3_Init 0 */
|
||||
|
||||
/* USER CODE END SPI3_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI3_Init 1 */
|
||||
|
||||
/* USER CODE END SPI3_Init 1 */
|
||||
/* SPI3 parameter configuration*/
|
||||
hspi3.Instance = SPI3;
|
||||
hspi3.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi3.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi3.Init.DataSize = SPI_DATASIZE_4BIT;
|
||||
hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||
hspi3.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||
hspi3.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
||||
hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi3.Init.CRCPolynomial = 7;
|
||||
hspi3.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||
hspi3.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
||||
if (HAL_SPI_Init(&hspi3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SPI3_Init 2 */
|
||||
|
||||
/* USER CODE END SPI3_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM1 Initialization Function
|
||||
* @param None
|
||||
|
||||
@@ -338,6 +338,39 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||||
|
||||
/* USER CODE END SPI2_MspInit 1 */
|
||||
}
|
||||
else if(hspi->Instance==SPI3)
|
||||
{
|
||||
/* USER CODE BEGIN SPI3_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI3_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SPI3_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**SPI3 GPIO Configuration
|
||||
PC11 ------> SPI3_MISO
|
||||
PB3 (JTDO-TRACESWO) ------> SPI3_SCK
|
||||
PB5 ------> SPI3_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_5;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI3_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI3_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
@@ -387,6 +420,27 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||||
|
||||
/* USER CODE END SPI2_MspDeInit 1 */
|
||||
}
|
||||
else if(hspi->Instance==SPI3)
|
||||
{
|
||||
/* USER CODE BEGIN SPI3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI3_CLK_DISABLE();
|
||||
|
||||
/**SPI3 GPIO Configuration
|
||||
PC11 ------> SPI3_MISO
|
||||
PB3 (JTDO-TRACESWO) ------> SPI3_SCK
|
||||
PB5 ------> SPI3_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_5);
|
||||
|
||||
/* USER CODE BEGIN SPI3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI3_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
||||
@@ -19,6 +19,12 @@ menu "Onboard Peripheral Drivers"
|
||||
select RT_USING_SFUD
|
||||
select RT_SFUD_USING_QSPI
|
||||
default n
|
||||
|
||||
config BSP_USING_SPI_LCD
|
||||
bool "Enable LCD (spi3)"
|
||||
select BSP_USING_SPI
|
||||
select BSP_USING_SPI3
|
||||
default n
|
||||
|
||||
config BSP_USING_SDCARD
|
||||
bool "Enable SDCARD (spi1)"
|
||||
@@ -135,6 +141,21 @@ menu "On-chip Peripheral Drivers"
|
||||
depends on BSP_USING_SPI2
|
||||
select BSP_SPI2_TX_USING_DMA
|
||||
default n
|
||||
|
||||
config BSP_USING_SPI3
|
||||
bool "Enable SPI3 BUS"
|
||||
default n
|
||||
|
||||
config BSP_SPI3_TX_USING_DMA
|
||||
bool "Enable SPI3 TX DMA"
|
||||
depends on BSP_USING_SPI3
|
||||
default n
|
||||
|
||||
config BSP_SPI3_RX_USING_DMA
|
||||
bool "Enable SPI3 RX DMA"
|
||||
depends on BSP_USING_SPI3
|
||||
select BSP_SPI3_TX_USING_DMA
|
||||
default n
|
||||
endif
|
||||
|
||||
config BSP_USING_QSPI
|
||||
|
||||
@@ -14,6 +14,9 @@ CubeMX_Config/Src/stm32l4xx_hal_msp.c
|
||||
|
||||
if GetDepend(['BSP_USING_QSPI_FLASH']):
|
||||
src += Glob('ports/drv_qspi_flash.c')
|
||||
|
||||
if GetDepend('BSP_USING_SPI_LCD'):
|
||||
src = src + ['ports/drv_lcd.c']
|
||||
|
||||
if GetDepend(['BSP_USING_SDCARD']):
|
||||
src += Glob('ports/sdcard_port.c')
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -83,17 +83,12 @@
|
||||
#define RT_SERIAL_RB_BUFSZ 64
|
||||
#define RT_USING_PIN
|
||||
|
||||
/* Using Hardware Crypto drivers */
|
||||
|
||||
|
||||
/* Using WiFi */
|
||||
|
||||
|
||||
/* Using USB */
|
||||
|
||||
|
||||
/* POSIX layer and C standard library */
|
||||
|
||||
#define RT_LIBC_USING_TIME
|
||||
|
||||
/* Network */
|
||||
|
||||
@@ -106,9 +101,6 @@
|
||||
/* light weight TCP/IP stack */
|
||||
|
||||
|
||||
/* Modbus master and slave stack */
|
||||
|
||||
|
||||
/* AT commands */
|
||||
|
||||
|
||||
@@ -157,12 +149,6 @@
|
||||
|
||||
/* samples: kernel and components samples */
|
||||
|
||||
|
||||
/* Privated Packages of RealThread */
|
||||
|
||||
|
||||
/* Network Utilities */
|
||||
|
||||
#define SOC_FAMILY_STM32
|
||||
#define SOC_SERIES_STM32L4
|
||||
|
||||
|
||||
Reference in New Issue
Block a user