Merge pull request #4266 from mysterywolf/bluepill

[stm32][bluepill] add the function of MDK simulator & update MDK5 project template

bsp/stm32/stm32f103-blue-pill/README.md

@@ -21,10 +21,10 @@ Video tutorial: https://www.youtube.com/watch?v=0PwBBYXQ08g
 
 ## 1 MCU Resources
 
-The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
+The STM32F103Cx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
 
 The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
-The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
+The STM32F103Cx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
 These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
 
 KEY FEATURES
@@ -76,7 +76,7 @@ KEY FEATURES
 
 ## 2 Onboard Resources
 
-- MCU：STM32F103C8T6 @72MHz, 64KB FLASH , 20KB RAM
+- MCU：STM32F103C8T6 @72MHz, 64KB FLASH (can be extended to 128KB) , 20KB RAM
 
 - Peripherals
   
@@ -199,6 +199,45 @@ These two videos will show you how to use PuTTy:
 
 
 
+### 3.7 Peripheral Condition
+
+Each peripheral supporting condition for this BSP is as follows:
+
+| **On-board Peripherals** | **Support** | **Remark**                                                   |
+| ------------------------ | ----------- | ------------------------------------------------------------ |
+| LED                      | √           | PC13                                                         |
+| USB Virtual Serial Port  | √           | USB CDC                                                      |
+| **On-chip Peripherals**  | **Support** | **Remark**                                                   |
+| GPIO                     | √           |                                                              |
+| UART                     | √           | USART1 / USART2                                              |
+| SPI                      | √           | SPI1                                                         |
+| I2C                      | √           | software simulate                                            |
+| USB                      | √           | USB Device                                                   |
+| ADC                      | √           | ADC1 IN1                                                     |
+| RTC                      | √           | Support for external crystal oscillator and internal low-speed clocks |
+| PWM                      |             |                                                              |
+| FLASH                    |             |                                                              |
+| IWG                      |             |                                                              |
+| UID                      | √           | STM32 Unique Device Identifier                               |
+
+
+
+### 3.8 MDK-Keil5 Simulator
+
+ If you haven't had a real Blue Pill Board yet, you may use MDK-Keil5 simulator to simulate to run RT-Thread on Blue Pill Board.
+
+![simulator1](figures/simulator1.png)
+
+
+
+![simulator2](figures/simulator2.jpg)
+
+
+
+![simulator3](figures/simulator3.png)
+
+
+
 ## 4 **Advanced Features**
 
 This BSP only enables GPIO and USART1 by default. If you need more advanced features such as SPI, ADC, or to add software packages, you need to configure the BSP with RT-Thread [ENV tool](https://www.rt-thread.io/download.html?download=Env), as follows:
@@ -214,35 +253,29 @@ Learn how to use RT-Thread ENV, click [Here](https://github.com/RT-Thread/rtthre
 
 ### 4.1 How to use USB virtual com as a console device
 
-#### 4.1.1 Step 1
-
-Enable USB device.
+**Step 1: Enable USB device.**
 
 ![usb_device1](figures/usb_device1.png)
 
 
 
-#### 4.1.2 Step 2
-
-Enable USB Device Driver and enable to use device as CDC device.
+**Step 2: Enable USB Device Driver and enable to use device as CDC device.**
 
 ![usb_device2](figures/usb_device2.png)
 
 
 
-#### 4.1.3 Step 3
-
-Select VC (virtual console) software package.
+**Step 3: Select vconsole (virtual console) software package.**
 
 ![vconsole](figures/vconsole.png)
 
 
 
-#### 4.1.4 Step 4
-
-Add these codes in main function which is located in 'Applications' folder, and don't forget to include `vconsole.h`.
+**Step 4: Add these codes in main function which is located in 'Applications' folder.**
 
 ```c
+#include <vconsole.h>
+
 rt_device_t dev = rt_device_find("vcom");
 vconsole_switch(dev);
 ```
@@ -251,9 +284,15 @@ vconsole_switch(dev);
 
 
 
-#### 4.1.5 Step 5
+**Step 5: Download the new program to your blue pill board.** 
 
-Download the new program to your blue pill board. Re-plug the USB cable and you will find a new serial (virtual com, 115200, 8-N-1) device in your computer. Then, you can use the USB instead of the UART-USB adapter as a console and send commands through USB cable. If you reset or reboot the blue pill board, you'll still need to re-plug the USB cable. 
+Re-plug the USB cable and you will find a new serial (virtual com, 115200, 8-N-1) device in your computer. Then, you can use the USB instead of the UART-USB adapter as a console and send commands through USB cable. If you reset or reboot the blue pill board, you'll still need to re-plug the USB cable. 
+
+
+
+### 4.2 How to extend Blue Pill board’s Flash space
+
+According to ST official datasheet, STM32F103C8 has 64KB of Flash. However, STM32F103C8 and STM32F103CB use the same type of silicon die, which means STM32F103C8 also has 128KB ROM in theory, but ST locked the high 64KB. Basically, to force the debugger to download program can unlock the high 64KB. There is a good news that **Keil5 will help you to unlock the Blue Pill Board high 64KB block** if you use Blue Pill Board BSP as a template to create your project. You just need to press the "Flash Download" button as usual. What you only need to remember is that Blue Pill board has 128KB of Flash rather than 64KB.
 
 
 

bsp/stm32/stm32f103-blue-pill/README_zh.md

@@ -41,10 +41,10 @@ STM32F103C8T6最小系统，采用SWD调试接口，可以用3个接口就能完
 本 BSP 目前对外设的支持情况如下：
 
 | **板载外设**      | **支持情况** | **备注**                              |
-| :----------------- | :----------: | :------------------------------------- |
+| :----------------- | :----------- | :------------------------------------- |
 | 	黄色LED		    |     支持      |       PC13                          |
 | **片上外设**      | **支持情况** | **备注**                              |
-| GPIO              |     支持     | PA0, PA1... PC15 ---> PIN: 0, 1...47 |
+| GPIO              |              |          |
 | UART              |     支持     | UART1                                |
 
 

bsp/stm32/stm32f103-blue-pill/applications/main.c

@@ -5,7 +5,7 @@
  *
  * Change Logs:
  * Date           Author       Notes
- * 2019-03-08     obito0   first version
+ * 2019-03-08     obito0       first version
  */
 
 #include <rtthread.h>

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/.mxproject

@@ -1,14 +1,14 @@
 [PreviousLibFiles]
-LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_cLine truncated
+LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/CMSIS/DeviLine truncated
 
 [PreviousUsedKeilFiles]
-SourceFiles=..\Src\main.c;..\Src\stm32f1xx_it.c;..\Src\stm32f1xx_hal_msp.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;
+SourceFiles=..\Src\main.c;..\Src\stm32f1xx_it.c;..\Src\stm32f1xx_hal_msp.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;
 HeaderPath=..\Drivers\STM32F1xx_HAL_Driver\Inc;..\Drivers\STM32F1xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F1xx\Include;..\Drivers\CMSIS\Include;..\Inc;
 CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;USE_HAL_DRIVER;
 
 [PreviousGenFiles]
-HeaderPath=E:/rt-thread/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Inc
+HeaderPath=C:/Users/92036/Desktop/bluepill/rtt_default_project_0/board/CubeMX_Config/Inc
 HeaderFiles=stm32f1xx_it.h;stm32f1xx_hal_conf.h;main.h;
-SourcePath=E:/rt-thread/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src
+SourcePath=C:/Users/92036/Desktop/bluepill/rtt_default_project_0/board/CubeMX_Config/Src
 SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;
 

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/CubeMX_Config.ioc

@@ -1,6 +1,6 @@
 #MicroXplorer Configuration settings - do not modify
 ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master
 ADC1.NbrOfConversionFlag=1
 ADC1.Rank-0\#ChannelRegularConversion=1
 ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
@@ -11,32 +11,35 @@ Mcu.Family=STM32F1
 Mcu.IP0=ADC1
 Mcu.IP1=NVIC
 Mcu.IP2=RCC
-Mcu.IP3=SPI1
-Mcu.IP4=SYS
-Mcu.IP5=USART1
-Mcu.IP6=USART2
-Mcu.IP7=USB
-Mcu.IPNb=8
+Mcu.IP3=RTC
+Mcu.IP4=SPI1
+Mcu.IP5=SYS
+Mcu.IP6=USART1
+Mcu.IP7=USART2
+Mcu.IP8=USB
+Mcu.IPNb=9
 Mcu.Name=STM32F103C(8-B)Tx
 Mcu.Package=LQFP48
-Mcu.Pin0=PC14-OSC32_IN
-Mcu.Pin1=PC15-OSC32_OUT
-Mcu.Pin10=PA9
-Mcu.Pin11=PA10
-Mcu.Pin12=PA11
-Mcu.Pin13=PA12
-Mcu.Pin14=PA13
-Mcu.Pin15=PA14
-Mcu.Pin16=VP_SYS_VS_Systick
-Mcu.Pin2=PD0-OSC_IN
-Mcu.Pin3=PD1-OSC_OUT
-Mcu.Pin4=PA1
-Mcu.Pin5=PA2
-Mcu.Pin6=PA3
-Mcu.Pin7=PA5
-Mcu.Pin8=PA6
-Mcu.Pin9=PA7
-Mcu.PinsNb=17
+Mcu.Pin0=PC13-TAMPER-RTC
+Mcu.Pin1=PC14-OSC32_IN
+Mcu.Pin10=PA7
+Mcu.Pin11=PA9
+Mcu.Pin12=PA10
+Mcu.Pin13=PA11
+Mcu.Pin14=PA12
+Mcu.Pin15=PA13
+Mcu.Pin16=PA14
+Mcu.Pin17=VP_RTC_VS_RTC_Activate
+Mcu.Pin18=VP_SYS_VS_Systick
+Mcu.Pin2=PC15-OSC32_OUT
+Mcu.Pin3=PD0-OSC_IN
+Mcu.Pin4=PD1-OSC_OUT
+Mcu.Pin5=PA1
+Mcu.Pin6=PA2
+Mcu.Pin7=PA3
+Mcu.Pin8=PA5
+Mcu.Pin9=PA6
+Mcu.PinsNb=19
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103C8Tx
@@ -76,6 +79,12 @@ PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PC13-TAMPER-RTC.GPIOParameters=GPIO_Speed,PinState,GPIO_ModeDefaultOutputPP
+PC13-TAMPER-RTC.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP
+PC13-TAMPER-RTC.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PC13-TAMPER-RTC.Locked=true
+PC13-TAMPER-RTC.PinState=GPIO_PIN_SET
+PC13-TAMPER-RTC.Signal=GPIO_Output
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
@@ -112,7 +121,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_USB_PCD_Init-USB-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_USB_PCD_Init-USB-false-HAL-true,7-MX_USART2_UART_Init-USART2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true
 RCC.ADCFreqValue=12000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV6
 RCC.AHBFreq_Value=72000000
@@ -148,6 +157,8 @@ USART1.IPParameters=VirtualMode
 USART1.VirtualMode=VM_ASYNC
 USART2.IPParameters=VirtualMode
 USART2.VirtualMode=VM_ASYNC
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 board=custom

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Inc/stm32f1xx_hal_conf.h

@@ -56,7 +56,7 @@
 /*#define HAL_HCD_MODULE_ENABLED   */
 /*#define HAL_PWR_MODULE_ENABLED   */
 /*#define HAL_RCC_MODULE_ENABLED   */
-/*#define HAL_RTC_MODULE_ENABLED   */
+#define HAL_RTC_MODULE_ENABLED
 /*#define HAL_SD_MODULE_ENABLED   */
 /*#define HAL_MMC_MODULE_ENABLED   */
 /*#define HAL_SDRAM_MODULE_ENABLED   */

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/main.c

@@ -43,6 +43,8 @@
 /* Private variables ---------------------------------------------------------*/
 ADC_HandleTypeDef hadc1;
 
+RTC_HandleTypeDef hrtc;
+
 SPI_HandleTypeDef hspi1;
 
 UART_HandleTypeDef huart1;
@@ -62,6 +64,7 @@ static void MX_ADC1_Init(void);
 static void MX_SPI1_Init(void);
 static void MX_USB_PCD_Init(void);
 static void MX_USART2_UART_Init(void);
+static void MX_RTC_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -104,6 +107,7 @@ int main(void)
   MX_SPI1_Init();
   MX_USB_PCD_Init();
   MX_USART2_UART_Init();
+  MX_RTC_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -132,10 +136,11 @@ void SystemClock_Config(void)
   /** Initializes the RCC Oscillators according to the specified parameters
   * in the RCC_OscInitTypeDef structure.
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
   RCC_OscInitStruct.HSEState = RCC_HSE_ON;
   RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
   RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
   RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
   RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
@@ -156,7 +161,9 @@ void SystemClock_Config(void)
   {
     Error_Handler();
   }
-  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USB;
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_ADC
+                              |RCC_PERIPHCLK_USB;
+  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
   PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
   PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
   if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -210,6 +217,36 @@ static void MX_ADC1_Init(void)
 
 }
 
+/**
+  * @brief RTC Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_RTC_Init(void)
+{
+
+  /* USER CODE BEGIN RTC_Init 0 */
+
+  /* USER CODE END RTC_Init 0 */
+
+  /* USER CODE BEGIN RTC_Init 1 */
+
+  /* USER CODE END RTC_Init 1 */
+  /** Initialize RTC Only
+  */
+  hrtc.Instance = RTC;
+  hrtc.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
+  hrtc.Init.OutPut = RTC_OUTPUTSOURCE_ALARM;
+  if (HAL_RTC_Init(&hrtc) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN RTC_Init 2 */
+
+  /* USER CODE END RTC_Init 2 */
+
+}
+
 /**
   * @brief SPI1 Initialization Function
   * @param None
@@ -352,12 +389,23 @@ static void MX_USB_PCD_Init(void)
   */
 static void MX_GPIO_Init(void)
 {
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
 
   /* GPIO Ports Clock Enable */
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOD_CLK_ENABLE();
   __HAL_RCC_GPIOA_CLK_ENABLE();
 
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_SET);
+
+  /*Configure GPIO pin : PC13 */
+  GPIO_InitStruct.Pin = GPIO_PIN_13;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
 }
 
 /* USER CODE BEGIN 4 */

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c

@@ -141,6 +141,53 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
 
 }
 
+/**
+* @brief RTC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspInit 0 */
+
+  /* USER CODE END RTC_MspInit 0 */
+    HAL_PWR_EnableBkUpAccess();
+    /* Enable BKP CLK enable for backup registers */
+    __HAL_RCC_BKP_CLK_ENABLE();
+    /* Peripheral clock enable */
+    __HAL_RCC_RTC_ENABLE();
+  /* USER CODE BEGIN RTC_MspInit 1 */
+
+  /* USER CODE END RTC_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief RTC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspDeInit 0 */
+
+  /* USER CODE END RTC_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RTC_DISABLE();
+  /* USER CODE BEGIN RTC_MspDeInit 1 */
+
+  /* USER CODE END RTC_MspDeInit 1 */
+  }
+
+}
+
 /**
 * @brief SPI MSP Initialization
 * This function configures the hardware resources used in this example

bsp/stm32/stm32f103-blue-pill/board/board.h

@@ -21,7 +21,7 @@ extern "C" {
 #endif
 
 #define STM32_FLASH_START_ADRESS     ((uint32_t)0x08000000)
-#define STM32_FLASH_SIZE             (64 * 1024)
+#define STM32_FLASH_SIZE             (128 * 1024)
 #define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
 
 /* Internal SRAM memory size[Kbytes] <8-64>, Default: 64*/

bsp/stm32/stm32f103-blue-pill/board/linker_scripts/link.icf

@@ -5,7 +5,7 @@
 define symbol __ICFEDIT_intvec_start__ = 0x08000000;
 /*-Memory Regions-*/
 define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x0800FFFF;
+define symbol __ICFEDIT_region_ROM_end__   = 0x0801FFFF;
 define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
 define symbol __ICFEDIT_region_RAM_end__   = 0x20004FFF;
 /*-Sizes-*/

bsp/stm32/stm32f103-blue-pill/board/linker_scripts/link.lds

@@ -5,7 +5,7 @@
 /* Program Entry, set to mark it as "used" and avoid gc */
 MEMORY
 {
-    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 64KB flash */
+    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 128k /* 128KB flash */
     RAM (rw) : ORIGIN = 0x20000000, LENGTH =  20k /* 20K sram */
 }
 ENTRY(Reset_Handler)

bsp/stm32/stm32f103-blue-pill/board/linker_scripts/link.sct

@@ -2,8 +2,8 @@
 ; *** Scatter-Loading Description File generated by uVision ***
 ; *************************************************************
 
-LR_IROM1 0x08000000 0x00010000  {    ; load region size_region
-  ER_IROM1 0x08000000 0x00010000  {  ; load address = execution address
+LR_IROM1 0x08000000 0x00020000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00020000  {  ; load address = execution address
    *.o (RESET, +First)
    *(InRoot$$Sections)
    .ANY (+RO)

bsp/stm32/stm32f103-blue-pill/project.uvoptx

@@ -26,7 +26,7 @@
     <ToolsetNumber>0x4</ToolsetNumber>
     <ToolsetName>ARM-ADS</ToolsetName>
     <TargetOption>
-      <CLKADS>12000000</CLKADS>
+      <CLKADS>8000000</CLKADS>
       <OPTTT>
         <gFlags>1</gFlags>
         <BeepAtEnd>1</BeepAtEnd>
@@ -73,33 +73,11 @@
         <LExpSel>0</LExpSel>
       </OPTXL>
       <OPTFL>
-        <tvExp>1</tvExp>
+        <tvExp>0</tvExp>
         <tvExpOptDlg>0</tvExpOptDlg>
         <IsCurrentTarget>1</IsCurrentTarget>
       </OPTFL>
       <CpuCode>18</CpuCode>
-      <Books>
-        <Book>
-          <Number>0</Number>
-          <Title>Base Board Schematics (MCBSTM32E)</Title>
-          <Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-base-board-schematics.pdf</Path>
-        </Book>
-        <Book>
-          <Number>1</Number>
-          <Title>Display Board Schematics (MCBSTM32E)</Title>
-          <Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-display-board-schematics.pdf</Path>
-        </Book>
-        <Book>
-          <Number>2</Number>
-          <Title>User Manual (MCBSTM32E)</Title>
-          <Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e.chm</Path>
-        </Book>
-        <Book>
-          <Number>3</Number>
-          <Title>MCBSTM32E Evaluation Board Web Page (MCBSTM32E)</Title>
-          <Path>http://www.keil.com/mcbstm32e/</Path>
-        </Book>
-      </Books>
       <DebugOpt>
         <uSim>0</uSim>
         <uTrg>1</uTrg>
@@ -122,7 +100,10 @@
         <tRSysVw>1</tRSysVw>
         <sRunDeb>0</sRunDeb>
         <sLrtime>0</sLrtime>
-        <nTsel>1</nTsel>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -133,18 +114,18 @@
         <tDlgDll></tDlgDll>
         <tDlgPa></tDlgPa>
         <tIfile></tIfile>
-        <pMon>BIN\UL2CM3.DLL</pMon>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
         <SetRegEntry>
           <Number>0</Number>
-          <Key>JL2CM3</Key>
-          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0</Name>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
-          <Key>UL2CM3</Key>
-          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
       <Breakpoint/>
@@ -179,6 +160,17 @@
       </DebugFlag>
       <LintExecutable></LintExecutable>
       <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
         <Enable>1</Enable>
         <EnableLog>0</EnableLog>

bsp/stm32/stm32f103-blue-pill/rtconfig.h

@@ -38,8 +38,9 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart1"
-#define RT_VER_NUM 0x40001
+#define RT_VER_NUM 0x40003
 #define ARCH_ARM
+#define RT_USING_CPU_FFS
 #define ARCH_ARM_CORTEX_M
 #define ARCH_ARM_CORTEX_M3
 
@@ -81,26 +82,24 @@
 #define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
 
-/* Using WiFi */
-
-
 /* Using USB */
 
 
 /* POSIX layer and C standard library */
 
+#define RT_LIBC_USING_TIME
 
 /* Network */
 
 /* Socket abstraction layer */
 
 
+/* Network interface device */
+
+
 /* light weight TCP/IP stack */
 
 
-/* Modbus master and slave stack */
-
-
 /* AT commands */
 
 
@@ -141,18 +140,19 @@
 /* system packages */
 
 
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
 /* peripheral libraries and drivers */
 
 
 /* miscellaneous packages */
 
 
-/* sample package */
-
 /* samples: kernel and components samples */
 
 
-/* example package: hello */
+/* games: games run on RT-Thread console */
 
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32F1

bsp/stm32/stm32f103-blue-pill/template.uvoptx

@@ -26,7 +26,7 @@
     <ToolsetNumber>0x4</ToolsetNumber>
     <ToolsetName>ARM-ADS</ToolsetName>
     <TargetOption>
-      <CLKADS>12000000</CLKADS>
+      <CLKADS>8000000</CLKADS>
       <OPTTT>
         <gFlags>1</gFlags>
         <BeepAtEnd>1</BeepAtEnd>
@@ -117,20 +117,15 @@
         <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
-        <SetRegEntry>
-          <Number>0</Number>
-          <Key>ST-LINKIII-KEIL_SWO</Key>
-          <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
-        </SetRegEntry>
-        <SetRegEntry>
-          <Number>0</Number>
-          <Key>JL2CM3</Key>
-          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0</Name>
-        </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
           <Key>UL2CM3</Key>
-          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
       <Breakpoint/>

bsp/stm32/stm32f103-blue-pill/template.uvprojx

@@ -13,16 +13,16 @@
       <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
-          <Device>STM32F103C8</Device>
+          <Device>STM32F103CB</Device>
           <Vendor>STMicroelectronics</Vendor>
           <PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
-          <Cpu>IROM(0x08000000,0x10000) IRAM(0x20000000,0x5000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
+          <Cpu>IRAM(0x20000000,0x00005000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
-          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM))</FlashDriverDll>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM))</FlashDriverDll>
           <DeviceId>0</DeviceId>
-          <RegisterFile>$$Device:STM32F103C8$Device\Include\stm32f10x.h</RegisterFile>
+          <RegisterFile>$$Device:STM32F103CB$Device\Include\stm32f10x.h</RegisterFile>
           <MemoryEnv></MemoryEnv>
           <Cmp></Cmp>
           <Asm></Asm>
@@ -32,7 +32,7 @@
           <SLE66CMisc></SLE66CMisc>
           <SLE66AMisc></SLE66AMisc>
           <SLE66LinkerMisc></SLE66LinkerMisc>
-          <SFDFile>$$Device:STM32F103C8$SVD\STM32F103xx.svd</SFDFile>
+          <SFDFile>$$Device:STM32F103CB$SVD\STM32F103xx.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
           <BinPath></BinPath>
@@ -110,12 +110,12 @@
         <DllOption>
           <SimDllName>SARMCM3.DLL</SimDllName>
           <SimDllArguments> -REMAP</SimDllArguments>
-          <SimDlgDll>DCM.DLL</SimDlgDll>
-          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <SimDlgDll>DARMSTM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pSTM32F103CB</SimDlgDllArguments>
           <TargetDllName>SARMCM3.DLL</TargetDllName>
           <TargetDllArguments></TargetDllArguments>
-          <TargetDlgDll>TCM.DLL</TargetDlgDll>
-          <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
+          <TargetDlgDll>TARMSTM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>pSTM32F103CB</TargetDlgDllArguments>
         </DllOption>
         <DebugOption>
           <OPTHX>
@@ -248,7 +248,7 @@
               <IROM>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x10000</Size>
+                <Size>0x20000</Size>
               </IROM>
               <XRAM>
                 <Type>0</Type>
@@ -273,7 +273,7 @@
               <OCR_RVCT4>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x10000</Size>
+                <Size>0x20000</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>
                 <Type>1</Type>